1 files changed, 0 insertions, 332 deletions
diff --git a/vendor/go.opentelemetry.io/otel/metric/instrument.go b/vendor/go.opentelemetry.io/otel/metric/instrument.go
deleted file mode 100644
index 268b2f155..000000000
--- a/vendor/go.opentelemetry.io/otel/metric/instrument.go
+++ /dev/null
@@ -1,332 +0,0 @@
-// Copyright The OpenTelemetry Authors
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-package metric // import "go.opentelemetry.io/otel/metric"
-
-import "go.opentelemetry.io/otel/attribute"
-
-// Observable is used as a grouping mechanism for all instruments that are
-// updated within a Callback.
-type Observable interface {
-	observable()
-}
-
-// InstrumentOption applies options to all instruments.
-type InstrumentOption interface {
-	Int64CounterOption
-	Int64UpDownCounterOption
-	Int64HistogramOption
-	Int64ObservableCounterOption
-	Int64ObservableUpDownCounterOption
-	Int64ObservableGaugeOption
-
-	Float64CounterOption
-	Float64UpDownCounterOption
-	Float64HistogramOption
-	Float64ObservableCounterOption
-	Float64ObservableUpDownCounterOption
-	Float64ObservableGaugeOption
-}
-
-type descOpt string
-
-func (o descOpt) applyFloat64Counter(c Float64CounterConfig) Float64CounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyFloat64UpDownCounter(c Float64UpDownCounterConfig) Float64UpDownCounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyFloat64Histogram(c Float64HistogramConfig) Float64HistogramConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyFloat64ObservableCounter(c Float64ObservableCounterConfig) Float64ObservableCounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyFloat64ObservableUpDownCounter(c Float64ObservableUpDownCounterConfig) Float64ObservableUpDownCounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyFloat64ObservableGauge(c Float64ObservableGaugeConfig) Float64ObservableGaugeConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyInt64Counter(c Int64CounterConfig) Int64CounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyInt64UpDownCounter(c Int64UpDownCounterConfig) Int64UpDownCounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyInt64Histogram(c Int64HistogramConfig) Int64HistogramConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyInt64ObservableCounter(c Int64ObservableCounterConfig) Int64ObservableCounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyInt64ObservableUpDownCounter(c Int64ObservableUpDownCounterConfig) Int64ObservableUpDownCounterConfig {
-	c.description = string(o)
-	return c
-}
-
-func (o descOpt) applyInt64ObservableGauge(c Int64ObservableGaugeConfig) Int64ObservableGaugeConfig {
-	c.description = string(o)
-	return c
-}
-
-// WithDescription sets the instrument description.
-func WithDescription(desc string) InstrumentOption { return descOpt(desc) }
-
-type unitOpt string
-
-func (o unitOpt) applyFloat64Counter(c Float64CounterConfig) Float64CounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyFloat64UpDownCounter(c Float64UpDownCounterConfig) Float64UpDownCounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyFloat64Histogram(c Float64HistogramConfig) Float64HistogramConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyFloat64ObservableCounter(c Float64ObservableCounterConfig) Float64ObservableCounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyFloat64ObservableUpDownCounter(c Float64ObservableUpDownCounterConfig) Float64ObservableUpDownCounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyFloat64ObservableGauge(c Float64ObservableGaugeConfig) Float64ObservableGaugeConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyInt64Counter(c Int64CounterConfig) Int64CounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyInt64UpDownCounter(c Int64UpDownCounterConfig) Int64UpDownCounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyInt64Histogram(c Int64HistogramConfig) Int64HistogramConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyInt64ObservableCounter(c Int64ObservableCounterConfig) Int64ObservableCounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyInt64ObservableUpDownCounter(c Int64ObservableUpDownCounterConfig) Int64ObservableUpDownCounterConfig {
-	c.unit = string(o)
-	return c
-}
-
-func (o unitOpt) applyInt64ObservableGauge(c Int64ObservableGaugeConfig) Int64ObservableGaugeConfig {
-	c.unit = string(o)
-	return c
-}
-
-// WithUnit sets the instrument unit.
-func WithUnit(u string) InstrumentOption { return unitOpt(u) }
-
-// AddOption applies options to an addition measurement. See
-// [MeasurementOption] for other options that can be used as a AddOption.
-type AddOption interface {
-	applyAdd(AddConfig) AddConfig
-}
-
-// AddConfig contains options for an addition measurement.
-type AddConfig struct {
-	attrs attribute.Set
-}
-
-// NewAddConfig returns a new [AddConfig] with all opts applied.
-func NewAddConfig(opts []AddOption) AddConfig {
-	config := AddConfig{attrs: *attribute.EmptySet()}
-	for _, o := range opts {
-		config = o.applyAdd(config)
-	}
-	return config
-}
-
-// Attributes returns the configured attribute set.
-func (c AddConfig) Attributes() attribute.Set {
-	return c.attrs
-}
-
-// RecordOption applies options to an addition measurement. See
-// [MeasurementOption] for other options that can be used as a RecordOption.
-type RecordOption interface {
-	applyRecord(RecordConfig) RecordConfig
-}
-
-// RecordConfig contains options for a recorded measurement.
-type RecordConfig struct {
-	attrs attribute.Set
-}
-
-// NewRecordConfig returns a new [RecordConfig] with all opts applied.
-func NewRecordConfig(opts []RecordOption) RecordConfig {
-	config := RecordConfig{attrs: *attribute.EmptySet()}
-	for _, o := range opts {
-		config = o.applyRecord(config)
-	}
-	return config
-}
-
-// Attributes returns the configured attribute set.
-func (c RecordConfig) Attributes() attribute.Set {
-	return c.attrs
-}
-
-// ObserveOption applies options to an addition measurement. See
-// [MeasurementOption] for other options that can be used as a ObserveOption.
-type ObserveOption interface {
-	applyObserve(ObserveConfig) ObserveConfig
-}
-
-// ObserveConfig contains options for an observed measurement.
-type ObserveConfig struct {
-	attrs attribute.Set
-}
-
-// NewObserveConfig returns a new [ObserveConfig] with all opts applied.
-func NewObserveConfig(opts []ObserveOption) ObserveConfig {
-	config := ObserveConfig{attrs: *attribute.EmptySet()}
-	for _, o := range opts {
-		config = o.applyObserve(config)
-	}
-	return config
-}
-
-// Attributes returns the configured attribute set.
-func (c ObserveConfig) Attributes() attribute.Set {
-	return c.attrs
-}
-
-// MeasurementOption applies options to all instrument measurement.
-type MeasurementOption interface {
-	AddOption
-	RecordOption
-	ObserveOption
-}
-
-type attrOpt struct {
-	set attribute.Set
-}
-
-// mergeSets returns the union of keys between a and b. Any duplicate keys will
-// use the value associated with b.
-func mergeSets(a, b attribute.Set) attribute.Set {
-	// NewMergeIterator uses the first value for any duplicates.
-	iter := attribute.NewMergeIterator(&b, &a)
-	merged := make([]attribute.KeyValue, 0, a.Len()+b.Len())
-	for iter.Next() {
-		merged = append(merged, iter.Attribute())
-	}
-	return attribute.NewSet(merged...)
-}
-
-func (o attrOpt) applyAdd(c AddConfig) AddConfig {
-	switch {
-	case o.set.Len() == 0:
-	case c.attrs.Len() == 0:
-		c.attrs = o.set
-	default:
-		c.attrs = mergeSets(c.attrs, o.set)
-	}
-	return c
-}
-
-func (o attrOpt) applyRecord(c RecordConfig) RecordConfig {
-	switch {
-	case o.set.Len() == 0:
-	case c.attrs.Len() == 0:
-		c.attrs = o.set
-	default:
-		c.attrs = mergeSets(c.attrs, o.set)
-	}
-	return c
-}
-
-func (o attrOpt) applyObserve(c ObserveConfig) ObserveConfig {
-	switch {
-	case o.set.Len() == 0:
-	case c.attrs.Len() == 0:
-		c.attrs = o.set
-	default:
-		c.attrs = mergeSets(c.attrs, o.set)
-	}
-	return c
-}
-
-// WithAttributeSet sets the attribute Set associated with a measurement is
-// made with.
-//
-// If multiple WithAttributeSet or WithAttributes options are passed the
-// attributes will be merged together in the order they are passed. Attributes
-// with duplicate keys will use the last value passed.
-func WithAttributeSet(attributes attribute.Set) MeasurementOption {
-	return attrOpt{set: attributes}
-}
-
-// WithAttributes converts attributes into an attribute Set and sets the Set to
-// be associated with a measurement. This is shorthand for:
-//
-//	cp := make([]attribute.KeyValue, len(attributes))
-//	copy(cp, attributes)
-//	WithAttributes(attribute.NewSet(cp...))
-//
-// [attribute.NewSet] may modify the passed attributes so this will make a copy
-// of attributes before creating a set in order to ensure this function is
-// concurrent safe. This makes this option function less optimized in
-// comparison to [WithAttributeSet]. Therefore, [WithAttributeSet] should be
-// preferred for performance sensitive code.
-//
-// See [WithAttributeSet] for information about how multiple WithAttributes are
-// merged.
-func WithAttributes(attributes ...attribute.KeyValue) MeasurementOption {
-	cp := make([]attribute.KeyValue, len(attributes))
-	copy(cp, attributes)
-	return attrOpt{set: attribute.NewSet(cp...)}
-}