[chore] remove vendor

3 files changed, 0 insertions, 665 deletions

diff --git a/vendor/google.golang.org/grpc/resolver/dns/dns_resolver.go b/vendor/google.golang.org/grpc/resolver/dns/dns_resolver.go
deleted file mode 100644
index ef3d6ed6c..000000000
--- a/vendor/google.golang.org/grpc/resolver/dns/dns_resolver.go
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * Copyright 2018 gRPC authors.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-// Package dns implements a dns resolver to be installed as the default resolver
-// in grpc.
-package dns
-
-import (
-	"time"
-
-	"google.golang.org/grpc/internal/resolver/dns"
-	"google.golang.org/grpc/resolver"
-)
-
-// SetResolvingTimeout sets the maximum duration for DNS resolution requests.
-//
-// This function affects the global timeout used by all channels using the DNS
-// name resolver scheme.
-//
-// It must be called only at application startup, before any gRPC calls are
-// made. Modifying this value after initialization is not thread-safe.
-//
-// The default value is 30 seconds. Setting the timeout too low may result in
-// premature timeouts during resolution, while setting it too high may lead to
-// unnecessary delays in service discovery. Choose a value appropriate for your
-// specific needs and network environment.
-func SetResolvingTimeout(timeout time.Duration) {
-	dns.ResolvingTimeout = timeout
-}
-
-// NewBuilder creates a dnsBuilder which is used to factory DNS resolvers.
-//
-// Deprecated: import grpc and use resolver.Get("dns") instead.
-func NewBuilder() resolver.Builder {
-	return dns.NewBuilder()
-}
-
-// SetMinResolutionInterval sets the default minimum interval at which DNS
-// re-resolutions are allowed. This helps to prevent excessive re-resolution.
-//
-// It must be called only at application startup, before any gRPC calls are
-// made. Modifying this value after initialization is not thread-safe.
-func SetMinResolutionInterval(d time.Duration) {
-	dns.MinResolutionInterval = d
-}
diff --git a/vendor/google.golang.org/grpc/resolver/map.go b/vendor/google.golang.org/grpc/resolver/map.go
deleted file mode 100644
index c3c15ac96..000000000
--- a/vendor/google.golang.org/grpc/resolver/map.go
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- *
- * Copyright 2021 gRPC authors.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-package resolver
-
-import (
-	"encoding/base64"
-	"sort"
-	"strings"
-)
-
-type addressMapEntry[T any] struct {
-	addr  Address
-	value T
-}
-
-// AddressMap is an AddressMapV2[any].  It will be deleted in an upcoming
-// release of grpc-go.
-//
-// Deprecated: use the generic AddressMapV2 type instead.
-type AddressMap = AddressMapV2[any]
-
-// AddressMapV2 is a map of addresses to arbitrary values taking into account
-// Attributes.  BalancerAttributes are ignored, as are Metadata and Type.
-// Multiple accesses may not be performed concurrently.  Must be created via
-// NewAddressMap; do not construct directly.
-type AddressMapV2[T any] struct {
-	// The underlying map is keyed by an Address with fields that we don't care
-	// about being set to their zero values. The only fields that we care about
-	// are `Addr`, `ServerName` and `Attributes`. Since we need to be able to
-	// distinguish between addresses with same `Addr` and `ServerName`, but
-	// different `Attributes`, we cannot store the `Attributes` in the map key.
-	//
-	// The comparison operation for structs work as follows:
-	//  Struct values are comparable if all their fields are comparable. Two
-	//  struct values are equal if their corresponding non-blank fields are equal.
-	//
-	// The value type of the map contains a slice of addresses which match the key
-	// in their `Addr` and `ServerName` fields and contain the corresponding value
-	// associated with them.
-	m map[Address]addressMapEntryList[T]
-}
-
-func toMapKey(addr *Address) Address {
-	return Address{Addr: addr.Addr, ServerName: addr.ServerName}
-}
-
-type addressMapEntryList[T any] []*addressMapEntry[T]
-
-// NewAddressMap creates a new AddressMapV2[any].
-//
-// Deprecated: use the generic NewAddressMapV2 constructor instead.
-func NewAddressMap() *AddressMap {
-	return NewAddressMapV2[any]()
-}
-
-// NewAddressMapV2 creates a new AddressMapV2.
-func NewAddressMapV2[T any]() *AddressMapV2[T] {
-	return &AddressMapV2[T]{m: make(map[Address]addressMapEntryList[T])}
-}
-
-// find returns the index of addr in the addressMapEntry slice, or -1 if not
-// present.
-func (l addressMapEntryList[T]) find(addr Address) int {
-	for i, entry := range l {
-		// Attributes are the only thing to match on here, since `Addr` and
-		// `ServerName` are already equal.
-		if entry.addr.Attributes.Equal(addr.Attributes) {
-			return i
-		}
-	}
-	return -1
-}
-
-// Get returns the value for the address in the map, if present.
-func (a *AddressMapV2[T]) Get(addr Address) (value T, ok bool) {
-	addrKey := toMapKey(&addr)
-	entryList := a.m[addrKey]
-	if entry := entryList.find(addr); entry != -1 {
-		return entryList[entry].value, true
-	}
-	return value, false
-}
-
-// Set updates or adds the value to the address in the map.
-func (a *AddressMapV2[T]) Set(addr Address, value T) {
-	addrKey := toMapKey(&addr)
-	entryList := a.m[addrKey]
-	if entry := entryList.find(addr); entry != -1 {
-		entryList[entry].value = value
-		return
-	}
-	a.m[addrKey] = append(entryList, &addressMapEntry[T]{addr: addr, value: value})
-}
-
-// Delete removes addr from the map.
-func (a *AddressMapV2[T]) Delete(addr Address) {
-	addrKey := toMapKey(&addr)
-	entryList := a.m[addrKey]
-	entry := entryList.find(addr)
-	if entry == -1 {
-		return
-	}
-	if len(entryList) == 1 {
-		entryList = nil
-	} else {
-		copy(entryList[entry:], entryList[entry+1:])
-		entryList = entryList[:len(entryList)-1]
-	}
-	a.m[addrKey] = entryList
-}
-
-// Len returns the number of entries in the map.
-func (a *AddressMapV2[T]) Len() int {
-	ret := 0
-	for _, entryList := range a.m {
-		ret += len(entryList)
-	}
-	return ret
-}
-
-// Keys returns a slice of all current map keys.
-func (a *AddressMapV2[T]) Keys() []Address {
-	ret := make([]Address, 0, a.Len())
-	for _, entryList := range a.m {
-		for _, entry := range entryList {
-			ret = append(ret, entry.addr)
-		}
-	}
-	return ret
-}
-
-// Values returns a slice of all current map values.
-func (a *AddressMapV2[T]) Values() []T {
-	ret := make([]T, 0, a.Len())
-	for _, entryList := range a.m {
-		for _, entry := range entryList {
-			ret = append(ret, entry.value)
-		}
-	}
-	return ret
-}
-
-type endpointMapKey string
-
-// EndpointMap is a map of endpoints to arbitrary values keyed on only the
-// unordered set of address strings within an endpoint. This map is not thread
-// safe, thus it is unsafe to access concurrently. Must be created via
-// NewEndpointMap; do not construct directly.
-type EndpointMap[T any] struct {
-	endpoints map[endpointMapKey]endpointData[T]
-}
-
-type endpointData[T any] struct {
-	// decodedKey stores the original key to avoid decoding when iterating on
-	// EndpointMap keys.
-	decodedKey Endpoint
-	value      T
-}
-
-// NewEndpointMap creates a new EndpointMap.
-func NewEndpointMap[T any]() *EndpointMap[T] {
-	return &EndpointMap[T]{
-		endpoints: make(map[endpointMapKey]endpointData[T]),
-	}
-}
-
-// encodeEndpoint returns a string that uniquely identifies the unordered set of
-// addresses within an endpoint.
-func encodeEndpoint(e Endpoint) endpointMapKey {
-	addrs := make([]string, 0, len(e.Addresses))
-	// base64 encoding the address strings restricts the characters present
-	// within the strings. This allows us to use a delimiter without the need of
-	// escape characters.
-	for _, addr := range e.Addresses {
-		addrs = append(addrs, base64.StdEncoding.EncodeToString([]byte(addr.Addr)))
-	}
-	sort.Strings(addrs)
-	// " " should not appear in base64 encoded strings.
-	return endpointMapKey(strings.Join(addrs, " "))
-}
-
-// Get returns the value for the address in the map, if present.
-func (em *EndpointMap[T]) Get(e Endpoint) (value T, ok bool) {
-	val, found := em.endpoints[encodeEndpoint(e)]
-	if found {
-		return val.value, true
-	}
-	return value, false
-}
-
-// Set updates or adds the value to the address in the map.
-func (em *EndpointMap[T]) Set(e Endpoint, value T) {
-	en := encodeEndpoint(e)
-	em.endpoints[en] = endpointData[T]{
-		decodedKey: Endpoint{Addresses: e.Addresses},
-		value:      value,
-	}
-}
-
-// Len returns the number of entries in the map.
-func (em *EndpointMap[T]) Len() int {
-	return len(em.endpoints)
-}
-
-// Keys returns a slice of all current map keys, as endpoints specifying the
-// addresses present in the endpoint keys, in which uniqueness is determined by
-// the unordered set of addresses. Thus, endpoint information returned is not
-// the full endpoint data (drops duplicated addresses and attributes) but can be
-// used for EndpointMap accesses.
-func (em *EndpointMap[T]) Keys() []Endpoint {
-	ret := make([]Endpoint, 0, len(em.endpoints))
-	for _, en := range em.endpoints {
-		ret = append(ret, en.decodedKey)
-	}
-	return ret
-}
-
-// Values returns a slice of all current map values.
-func (em *EndpointMap[T]) Values() []T {
-	ret := make([]T, 0, len(em.endpoints))
-	for _, val := range em.endpoints {
-		ret = append(ret, val.value)
-	}
-	return ret
-}
-
-// Delete removes the specified endpoint from the map.
-func (em *EndpointMap[T]) Delete(e Endpoint) {
-	en := encodeEndpoint(e)
-	delete(em.endpoints, en)
-}
diff --git a/vendor/google.golang.org/grpc/resolver/resolver.go b/vendor/google.golang.org/grpc/resolver/resolver.go
deleted file mode 100644
index 8e6af9514..000000000
--- a/vendor/google.golang.org/grpc/resolver/resolver.go
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- *
- * Copyright 2017 gRPC authors.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-// Package resolver defines APIs for name resolution in gRPC.
-// All APIs in this package are experimental.
-package resolver
-
-import (
-	"context"
-	"errors"
-	"fmt"
-	"net"
-	"net/url"
-	"strings"
-
-	"google.golang.org/grpc/attributes"
-	"google.golang.org/grpc/credentials"
-	"google.golang.org/grpc/experimental/stats"
-	"google.golang.org/grpc/internal"
-	"google.golang.org/grpc/serviceconfig"
-)
-
-var (
-	// m is a map from scheme to resolver builder.
-	m = make(map[string]Builder)
-	// defaultScheme is the default scheme to use.
-	defaultScheme = "passthrough"
-)
-
-// TODO(bar) install dns resolver in init(){}.
-
-// Register registers the resolver builder to the resolver map. b.Scheme will
-// be used as the scheme registered with this builder. The registry is case
-// sensitive, and schemes should not contain any uppercase characters.
-//
-// NOTE: this function must only be called during initialization time (i.e. in
-// an init() function), and is not thread-safe. If multiple Resolvers are
-// registered with the same name, the one registered last will take effect.
-func Register(b Builder) {
-	m[b.Scheme()] = b
-}
-
-// Get returns the resolver builder registered with the given scheme.
-//
-// If no builder is register with the scheme, nil will be returned.
-func Get(scheme string) Builder {
-	if b, ok := m[scheme]; ok {
-		return b
-	}
-	return nil
-}
-
-// SetDefaultScheme sets the default scheme that will be used. The default
-// scheme is initially set to "passthrough".
-//
-// NOTE: this function must only be called during initialization time (i.e. in
-// an init() function), and is not thread-safe. The scheme set last overrides
-// previously set values.
-func SetDefaultScheme(scheme string) {
-	defaultScheme = scheme
-	internal.UserSetDefaultScheme = true
-}
-
-// GetDefaultScheme gets the default scheme that will be used by grpc.Dial.  If
-// SetDefaultScheme is never called, the default scheme used by grpc.NewClient is "dns" instead.
-func GetDefaultScheme() string {
-	return defaultScheme
-}
-
-// Address represents a server the client connects to.
-//
-// # Experimental
-//
-// Notice: This type is EXPERIMENTAL and may be changed or removed in a
-// later release.
-type Address struct {
-	// Addr is the server address on which a connection will be established.
-	Addr string
-
-	// ServerName is the name of this address.
-	// If non-empty, the ServerName is used as the transport certification authority for
-	// the address, instead of the hostname from the Dial target string. In most cases,
-	// this should not be set.
-	//
-	// WARNING: ServerName must only be populated with trusted values. It
-	// is insecure to populate it with data from untrusted inputs since untrusted
-	// values could be used to bypass the authority checks performed by TLS.
-	ServerName string
-
-	// Attributes contains arbitrary data about this address intended for
-	// consumption by the SubConn.
-	Attributes *attributes.Attributes
-
-	// BalancerAttributes contains arbitrary data about this address intended
-	// for consumption by the LB policy.  These attributes do not affect SubConn
-	// creation, connection establishment, handshaking, etc.
-	//
-	// Deprecated: when an Address is inside an Endpoint, this field should not
-	// be used, and it will eventually be removed entirely.
-	BalancerAttributes *attributes.Attributes
-
-	// Metadata is the information associated with Addr, which may be used
-	// to make load balancing decision.
-	//
-	// Deprecated: use Attributes instead.
-	Metadata any
-}
-
-// Equal returns whether a and o are identical.  Metadata is compared directly,
-// not with any recursive introspection.
-//
-// This method compares all fields of the address. When used to tell apart
-// addresses during subchannel creation or connection establishment, it might be
-// more appropriate for the caller to implement custom equality logic.
-func (a Address) Equal(o Address) bool {
-	return a.Addr == o.Addr && a.ServerName == o.ServerName &&
-		a.Attributes.Equal(o.Attributes) &&
-		a.BalancerAttributes.Equal(o.BalancerAttributes) &&
-		a.Metadata == o.Metadata
-}
-
-// String returns JSON formatted string representation of the address.
-func (a Address) String() string {
-	var sb strings.Builder
-	sb.WriteString(fmt.Sprintf("{Addr: %q, ", a.Addr))
-	sb.WriteString(fmt.Sprintf("ServerName: %q, ", a.ServerName))
-	if a.Attributes != nil {
-		sb.WriteString(fmt.Sprintf("Attributes: %v, ", a.Attributes.String()))
-	}
-	if a.BalancerAttributes != nil {
-		sb.WriteString(fmt.Sprintf("BalancerAttributes: %v", a.BalancerAttributes.String()))
-	}
-	sb.WriteString("}")
-	return sb.String()
-}
-
-// BuildOptions includes additional information for the builder to create
-// the resolver.
-type BuildOptions struct {
-	// DisableServiceConfig indicates whether a resolver implementation should
-	// fetch service config data.
-	DisableServiceConfig bool
-	// DialCreds is the transport credentials used by the ClientConn for
-	// communicating with the target gRPC service (set via
-	// WithTransportCredentials). In cases where a name resolution service
-	// requires the same credentials, the resolver may use this field. In most
-	// cases though, it is not appropriate, and this field may be ignored.
-	DialCreds credentials.TransportCredentials
-	// CredsBundle is the credentials bundle used by the ClientConn for
-	// communicating with the target gRPC service (set via
-	// WithCredentialsBundle). In cases where a name resolution service
-	// requires the same credentials, the resolver may use this field. In most
-	// cases though, it is not appropriate, and this field may be ignored.
-	CredsBundle credentials.Bundle
-	// Dialer is the custom dialer used by the ClientConn for dialling the
-	// target gRPC service (set via WithDialer). In cases where a name
-	// resolution service requires the same dialer, the resolver may use this
-	// field. In most cases though, it is not appropriate, and this field may
-	// be ignored.
-	Dialer func(context.Context, string) (net.Conn, error)
-	// Authority is the effective authority of the clientconn for which the
-	// resolver is built.
-	Authority string
-	// MetricsRecorder is the metrics recorder to do recording.
-	MetricsRecorder stats.MetricsRecorder
-}
-
-// An Endpoint is one network endpoint, or server, which may have multiple
-// addresses with which it can be accessed.
-type Endpoint struct {
-	// Addresses contains a list of addresses used to access this endpoint.
-	Addresses []Address
-
-	// Attributes contains arbitrary data about this endpoint intended for
-	// consumption by the LB policy.
-	Attributes *attributes.Attributes
-}
-
-// State contains the current Resolver state relevant to the ClientConn.
-type State struct {
-	// Addresses is the latest set of resolved addresses for the target.
-	//
-	// If a resolver sets Addresses but does not set Endpoints, one Endpoint
-	// will be created for each Address before the State is passed to the LB
-	// policy.  The BalancerAttributes of each entry in Addresses will be set
-	// in Endpoints.Attributes, and be cleared in the Endpoint's Address's
-	// BalancerAttributes.
-	//
-	// Soon, Addresses will be deprecated and replaced fully by Endpoints.
-	Addresses []Address
-
-	// Endpoints is the latest set of resolved endpoints for the target.
-	//
-	// If a resolver produces a State containing Endpoints but not Addresses,
-	// it must take care to ensure the LB policies it selects will support
-	// Endpoints.
-	Endpoints []Endpoint
-
-	// ServiceConfig contains the result from parsing the latest service
-	// config.  If it is nil, it indicates no service config is present or the
-	// resolver does not provide service configs.
-	ServiceConfig *serviceconfig.ParseResult
-
-	// Attributes contains arbitrary data about the resolver intended for
-	// consumption by the load balancing policy.
-	Attributes *attributes.Attributes
-}
-
-// ClientConn contains the callbacks for resolver to notify any updates
-// to the gRPC ClientConn.
-//
-// This interface is to be implemented by gRPC. Users should not need a
-// brand new implementation of this interface. For the situations like
-// testing, the new implementation should embed this interface. This allows
-// gRPC to add new methods to this interface.
-type ClientConn interface {
-	// UpdateState updates the state of the ClientConn appropriately.
-	//
-	// If an error is returned, the resolver should try to resolve the
-	// target again. The resolver should use a backoff timer to prevent
-	// overloading the server with requests. If a resolver is certain that
-	// reresolving will not change the result, e.g. because it is
-	// a watch-based resolver, returned errors can be ignored.
-	//
-	// If the resolved State is the same as the last reported one, calling
-	// UpdateState can be omitted.
-	UpdateState(State) error
-	// ReportError notifies the ClientConn that the Resolver encountered an
-	// error. The ClientConn then forwards this error to the load balancing
-	// policy.
-	ReportError(error)
-	// NewAddress is called by resolver to notify ClientConn a new list
-	// of resolved addresses.
-	// The address list should be the complete list of resolved addresses.
-	//
-	// Deprecated: Use UpdateState instead.
-	NewAddress(addresses []Address)
-	// ParseServiceConfig parses the provided service config and returns an
-	// object that provides the parsed config.
-	ParseServiceConfig(serviceConfigJSON string) *serviceconfig.ParseResult
-}
-
-// Target represents a target for gRPC, as specified in:
-// https://github.com/grpc/grpc/blob/master/doc/naming.md.
-// It is parsed from the target string that gets passed into Dial or DialContext
-// by the user. And gRPC passes it to the resolver and the balancer.
-//
-// If the target follows the naming spec, and the parsed scheme is registered
-// with gRPC, we will parse the target string according to the spec. If the
-// target does not contain a scheme or if the parsed scheme is not registered
-// (i.e. no corresponding resolver available to resolve the endpoint), we will
-// apply the default scheme, and will attempt to reparse it.
-type Target struct {
-	// URL contains the parsed dial target with an optional default scheme added
-	// to it if the original dial target contained no scheme or contained an
-	// unregistered scheme. Any query params specified in the original dial
-	// target can be accessed from here.
-	URL url.URL
-}
-
-// Endpoint retrieves endpoint without leading "/" from either `URL.Path`
-// or `URL.Opaque`. The latter is used when the former is empty.
-func (t Target) Endpoint() string {
-	endpoint := t.URL.Path
-	if endpoint == "" {
-		endpoint = t.URL.Opaque
-	}
-	// For targets of the form "[scheme]://[authority]/endpoint, the endpoint
-	// value returned from url.Parse() contains a leading "/". Although this is
-	// in accordance with RFC 3986, we do not want to break existing resolver
-	// implementations which expect the endpoint without the leading "/". So, we
-	// end up stripping the leading "/" here. But this will result in an
-	// incorrect parsing for something like "unix:///path/to/socket". Since we
-	// own the "unix" resolver, we can workaround in the unix resolver by using
-	// the `URL` field.
-	return strings.TrimPrefix(endpoint, "/")
-}
-
-// String returns the canonical string representation of Target.
-func (t Target) String() string {
-	return t.URL.Scheme + "://" + t.URL.Host + "/" + t.Endpoint()
-}
-
-// Builder creates a resolver that will be used to watch name resolution updates.
-type Builder interface {
-	// Build creates a new resolver for the given target.
-	//
-	// gRPC dial calls Build synchronously, and fails if the returned error is
-	// not nil.
-	Build(target Target, cc ClientConn, opts BuildOptions) (Resolver, error)
-	// Scheme returns the scheme supported by this resolver.  Scheme is defined
-	// at https://github.com/grpc/grpc/blob/master/doc/naming.md.  The returned
-	// string should not contain uppercase characters, as they will not match
-	// the parsed target's scheme as defined in RFC 3986.
-	Scheme() string
-}
-
-// ResolveNowOptions includes additional information for ResolveNow.
-type ResolveNowOptions struct{}
-
-// Resolver watches for the updates on the specified target.
-// Updates include address updates and service config updates.
-type Resolver interface {
-	// ResolveNow will be called by gRPC to try to resolve the target name
-	// again. It's just a hint, resolver can ignore this if it's not necessary.
-	//
-	// It could be called multiple times concurrently.
-	ResolveNow(ResolveNowOptions)
-	// Close closes the resolver.
-	Close()
-}
-
-// AuthorityOverrider is implemented by Builders that wish to override the
-// default authority for the ClientConn.
-// By default, the authority used is target.Endpoint().
-type AuthorityOverrider interface {
-	// OverrideAuthority returns the authority to use for a ClientConn with the
-	// given target. The implementation must generate it without blocking,
-	// typically in line, and must keep it unchanged.
-	//
-	// The returned string must be a valid ":authority" header value, i.e. be
-	// encoded according to
-	// [RFC3986](https://datatracker.ietf.org/doc/html/rfc3986#section-3.2) as
-	// necessary.
-	OverrideAuthority(Target) string
-}
-
-// ValidateEndpoints validates endpoints from a petiole policy's perspective.
-// Petiole policies should call this before calling into their children. See
-// [gRPC A61](https://github.com/grpc/proposal/blob/master/A61-IPv4-IPv6-dualstack-backends.md)
-// for details.
-func ValidateEndpoints(endpoints []Endpoint) error {
-	if len(endpoints) == 0 {
-		return errors.New("endpoints list is empty")
-	}
-
-	for _, endpoint := range endpoints {
-		for range endpoint.Addresses {
-			return nil
-		}
-	}
-	return errors.New("endpoints list contains no addresses")
-}