[chore]: Bump golang.org/x/crypto from 0.21.0 to 0.22.0 (#2835)

7 files changed, 404 insertions, 118 deletions

diff --git a/vendor/golang.org/x/crypto/chacha20/chacha_ppc64le.s b/vendor/golang.org/x/crypto/chacha20/chacha_ppc64le.s
index 66aebae25..c672ccf69 100644
--- a/vendor/golang.org/x/crypto/chacha20/chacha_ppc64le.s
+++ b/vendor/golang.org/x/crypto/chacha20/chacha_ppc64le.s
@@ -33,6 +33,9 @@
 #define CONSTBASE  R16
 #define BLOCKS R17
 
+// for VPERMXOR
+#define MASK  R18
+
 DATA consts<>+0x00(SB)/8, $0x3320646e61707865
 DATA consts<>+0x08(SB)/8, $0x6b20657479622d32
 DATA consts<>+0x10(SB)/8, $0x0000000000000001
@@ -53,7 +56,11 @@ DATA consts<>+0x80(SB)/8, $0x6b2065746b206574
 DATA consts<>+0x88(SB)/8, $0x6b2065746b206574
 DATA consts<>+0x90(SB)/8, $0x0000000100000000
 DATA consts<>+0x98(SB)/8, $0x0000000300000002
-GLOBL consts<>(SB), RODATA, $0xa0
+DATA consts<>+0xa0(SB)/8, $0x5566774411223300
+DATA consts<>+0xa8(SB)/8, $0xddeeffcc99aabb88
+DATA consts<>+0xb0(SB)/8, $0x6677445522330011
+DATA consts<>+0xb8(SB)/8, $0xeeffccddaabb8899
+GLOBL consts<>(SB), RODATA, $0xc0
 
 //func chaCha20_ctr32_vsx(out, inp *byte, len int, key *[8]uint32, counter *uint32)
 TEXT ·chaCha20_ctr32_vsx(SB),NOSPLIT,$64-40
@@ -70,6 +77,9 @@ TEXT ·chaCha20_ctr32_vsx(SB),NOSPLIT,$64-40
 	MOVD $48, R10
 	MOVD $64, R11
 	SRD $6, LEN, BLOCKS
+	// for VPERMXOR
+	MOVD $consts<>+0xa0(SB), MASK
+	MOVD $16, R20
 	// V16
 	LXVW4X (CONSTBASE)(R0), VS48
 	ADD $80,CONSTBASE
@@ -87,6 +97,10 @@ TEXT ·chaCha20_ctr32_vsx(SB),NOSPLIT,$64-40
 	// V28
 	LXVW4X (CONSTBASE)(R11), VS60
 
+	// Load mask constants for VPERMXOR
+	LXVW4X (MASK)(R0), V20
+	LXVW4X (MASK)(R20), V21
+
 	// splat slot from V19 -> V26
 	VSPLTW $0, V19, V26
 
@@ -97,7 +111,7 @@ TEXT ·chaCha20_ctr32_vsx(SB),NOSPLIT,$64-40
 
 	MOVD $10, R14
 	MOVD R14, CTR
-
+	PCALIGN $16
 loop_outer_vsx:
 	// V0, V1, V2, V3
 	LXVW4X (R0)(CONSTBASE), VS32
@@ -128,22 +142,17 @@ loop_outer_vsx:
 	VSPLTISW $12, V28
 	VSPLTISW $8, V29
 	VSPLTISW $7, V30
-
+	PCALIGN $16
 loop_vsx:
 	VADDUWM V0, V4, V0
 	VADDUWM V1, V5, V1
 	VADDUWM V2, V6, V2
 	VADDUWM V3, V7, V3
 
-	VXOR V12, V0, V12
-	VXOR V13, V1, V13
-	VXOR V14, V2, V14
-	VXOR V15, V3, V15
-
-	VRLW V12, V27, V12
-	VRLW V13, V27, V13
-	VRLW V14, V27, V14
-	VRLW V15, V27, V15
+	VPERMXOR V12, V0, V21, V12
+	VPERMXOR V13, V1, V21, V13
+	VPERMXOR V14, V2, V21, V14
+	VPERMXOR V15, V3, V21, V15
 
 	VADDUWM V8, V12, V8
 	VADDUWM V9, V13, V9
@@ -165,15 +174,10 @@ loop_vsx:
 	VADDUWM V2, V6, V2
 	VADDUWM V3, V7, V3
 
-	VXOR V12, V0, V12
-	VXOR V13, V1, V13
-	VXOR V14, V2, V14
-	VXOR V15, V3, V15
-
-	VRLW V12, V29, V12
-	VRLW V13, V29, V13
-	VRLW V14, V29, V14
-	VRLW V15, V29, V15
+	VPERMXOR V12, V0, V20, V12
+	VPERMXOR V13, V1, V20, V13
+	VPERMXOR V14, V2, V20, V14
+	VPERMXOR V15, V3, V20, V15
 
 	VADDUWM V8, V12, V8
 	VADDUWM V9, V13, V9
@@ -195,15 +199,10 @@ loop_vsx:
 	VADDUWM V2, V7, V2
 	VADDUWM V3, V4, V3
 
-	VXOR V15, V0, V15
-	VXOR V12, V1, V12
-	VXOR V13, V2, V13
-	VXOR V14, V3, V14
-
-	VRLW V15, V27, V15
-	VRLW V12, V27, V12
-	VRLW V13, V27, V13
-	VRLW V14, V27, V14
+	VPERMXOR V15, V0, V21, V15
+	VPERMXOR V12, V1, V21, V12
+	VPERMXOR V13, V2, V21, V13
+	VPERMXOR V14, V3, V21, V14
 
 	VADDUWM V10, V15, V10
 	VADDUWM V11, V12, V11
@@ -225,15 +224,10 @@ loop_vsx:
 	VADDUWM V2, V7, V2
 	VADDUWM V3, V4, V3
 
-	VXOR V15, V0, V15
-	VXOR V12, V1, V12
-	VXOR V13, V2, V13
-	VXOR V14, V3, V14
-
-	VRLW V15, V29, V15
-	VRLW V12, V29, V12
-	VRLW V13, V29, V13
-	VRLW V14, V29, V14
+	VPERMXOR V15, V0, V20, V15
+	VPERMXOR V12, V1, V20, V12
+	VPERMXOR V13, V2, V20, V13
+	VPERMXOR V14, V3, V20, V14
 
 	VADDUWM V10, V15, V10
 	VADDUWM V11, V12, V11
@@ -249,48 +243,48 @@ loop_vsx:
 	VRLW V6, V30, V6
 	VRLW V7, V30, V7
 	VRLW V4, V30, V4
-	BC   16, LT, loop_vsx
+	BDNZ   loop_vsx
 
 	VADDUWM V12, V26, V12
 
-	WORD $0x13600F8C		// VMRGEW V0, V1, V27
-	WORD $0x13821F8C		// VMRGEW V2, V3, V28
+	VMRGEW V0, V1, V27
+	VMRGEW V2, V3, V28
 
-	WORD $0x10000E8C		// VMRGOW V0, V1, V0
-	WORD $0x10421E8C		// VMRGOW V2, V3, V2
+	VMRGOW V0, V1, V0
+	VMRGOW V2, V3, V2
 
-	WORD $0x13A42F8C		// VMRGEW V4, V5, V29
-	WORD $0x13C63F8C		// VMRGEW V6, V7, V30
+	VMRGEW V4, V5, V29
+	VMRGEW V6, V7, V30
 
 	XXPERMDI VS32, VS34, $0, VS33
 	XXPERMDI VS32, VS34, $3, VS35
 	XXPERMDI VS59, VS60, $0, VS32
 	XXPERMDI VS59, VS60, $3, VS34
 
-	WORD $0x10842E8C		// VMRGOW V4, V5, V4
-	WORD $0x10C63E8C		// VMRGOW V6, V7, V6
+	VMRGOW V4, V5, V4
+	VMRGOW V6, V7, V6
 
-	WORD $0x13684F8C		// VMRGEW V8, V9, V27
-	WORD $0x138A5F8C		// VMRGEW V10, V11, V28
+	VMRGEW V8, V9, V27
+	VMRGEW V10, V11, V28
 
 	XXPERMDI VS36, VS38, $0, VS37
 	XXPERMDI VS36, VS38, $3, VS39
 	XXPERMDI VS61, VS62, $0, VS36
 	XXPERMDI VS61, VS62, $3, VS38
 
-	WORD $0x11084E8C		// VMRGOW V8, V9, V8
-	WORD $0x114A5E8C		// VMRGOW V10, V11, V10
+	VMRGOW V8, V9, V8
+	VMRGOW V10, V11, V10
 
-	WORD $0x13AC6F8C		// VMRGEW V12, V13, V29
-	WORD $0x13CE7F8C		// VMRGEW V14, V15, V30
+	VMRGEW V12, V13, V29
+	VMRGEW V14, V15, V30
 
 	XXPERMDI VS40, VS42, $0, VS41
 	XXPERMDI VS40, VS42, $3, VS43
 	XXPERMDI VS59, VS60, $0, VS40
 	XXPERMDI VS59, VS60, $3, VS42
 
-	WORD $0x118C6E8C		// VMRGOW V12, V13, V12
-	WORD $0x11CE7E8C		// VMRGOW V14, V15, V14
+	VMRGOW V12, V13, V12
+	VMRGOW V14, V15, V14
 
 	VSPLTISW $4, V27
 	VADDUWM V26, V27, V26
@@ -431,7 +425,7 @@ tail_vsx:
 	ADD $-1, R11, R12
 	ADD $-1, INP
 	ADD $-1, OUT
-
+	PCALIGN $16
 looptail_vsx:
 	// Copying the result to OUT
 	// in bytes.
@@ -439,7 +433,7 @@ looptail_vsx:
 	MOVBZU 1(INP), TMP
 	XOR    KEY, TMP, KEY
 	MOVBU  KEY, 1(OUT)
-	BC     16, LT, looptail_vsx
+	BDNZ   looptail_vsx
 
 	// Clear the stack values
 	STXVW4X VS48, (R11)(R0)
diff --git a/vendor/golang.org/x/crypto/ssh/server.go b/vendor/golang.org/x/crypto/ssh/server.go
index c2dfe3268..e2ae4f891 100644
--- a/vendor/golang.org/x/crypto/ssh/server.go
+++ b/vendor/golang.org/x/crypto/ssh/server.go
@@ -426,6 +426,35 @@ func (l ServerAuthError) Error() string {
 	return "[" + strings.Join(errs, ", ") + "]"
 }
 
+// ServerAuthCallbacks defines server-side authentication callbacks.
+type ServerAuthCallbacks struct {
+	// PasswordCallback behaves like [ServerConfig.PasswordCallback].
+	PasswordCallback func(conn ConnMetadata, password []byte) (*Permissions, error)
+
+	// PublicKeyCallback behaves like [ServerConfig.PublicKeyCallback].
+	PublicKeyCallback func(conn ConnMetadata, key PublicKey) (*Permissions, error)
+
+	// KeyboardInteractiveCallback behaves like [ServerConfig.KeyboardInteractiveCallback].
+	KeyboardInteractiveCallback func(conn ConnMetadata, client KeyboardInteractiveChallenge) (*Permissions, error)
+
+	// GSSAPIWithMICConfig behaves like [ServerConfig.GSSAPIWithMICConfig].
+	GSSAPIWithMICConfig *GSSAPIWithMICConfig
+}
+
+// PartialSuccessError can be returned by any of the [ServerConfig]
+// authentication callbacks to indicate to the client that authentication has
+// partially succeeded, but further steps are required.
+type PartialSuccessError struct {
+	// Next defines the authentication callbacks to apply to further steps. The
+	// available methods communicated to the client are based on the non-nil
+	// ServerAuthCallbacks fields.
+	Next ServerAuthCallbacks
+}
+
+func (p *PartialSuccessError) Error() string {
+	return "ssh: authenticated with partial success"
+}
+
 // ErrNoAuth is the error value returned if no
 // authentication method has been passed yet. This happens as a normal
 // part of the authentication loop, since the client first tries
@@ -439,8 +468,18 @@ func (s *connection) serverAuthenticate(config *ServerConfig) (*Permissions, err
 	var perms *Permissions
 
 	authFailures := 0
+	noneAuthCount := 0
 	var authErrs []error
 	var displayedBanner bool
+	partialSuccessReturned := false
+	// Set the initial authentication callbacks from the config. They can be
+	// changed if a PartialSuccessError is returned.
+	authConfig := ServerAuthCallbacks{
+		PasswordCallback:            config.PasswordCallback,
+		PublicKeyCallback:           config.PublicKeyCallback,
+		KeyboardInteractiveCallback: config.KeyboardInteractiveCallback,
+		GSSAPIWithMICConfig:         config.GSSAPIWithMICConfig,
+	}
 
 userAuthLoop:
 	for {
@@ -471,6 +510,11 @@ userAuthLoop:
 			return nil, errors.New("ssh: client attempted to negotiate for unknown service: " + userAuthReq.Service)
 		}
 
+		if s.user != userAuthReq.User && partialSuccessReturned {
+			return nil, fmt.Errorf("ssh: client changed the user after a partial success authentication, previous user %q, current user %q",
+				s.user, userAuthReq.User)
+		}
+
 		s.user = userAuthReq.User
 
 		if !displayedBanner && config.BannerCallback != nil {
@@ -491,20 +535,18 @@ userAuthLoop:
 
 		switch userAuthReq.Method {
 		case "none":
-			if config.NoClientAuth {
+			noneAuthCount++
+			// We don't allow none authentication after a partial success
+			// response.
+			if config.NoClientAuth && !partialSuccessReturned {
 				if config.NoClientAuthCallback != nil {
 					perms, authErr = config.NoClientAuthCallback(s)
 				} else {
 					authErr = nil
 				}
 			}
-
-			// allow initial attempt of 'none' without penalty
-			if authFailures == 0 {
-				authFailures--
-			}
 		case "password":
-			if config.PasswordCallback == nil {
+			if authConfig.PasswordCallback == nil {
 				authErr = errors.New("ssh: password auth not configured")
 				break
 			}
@@ -518,17 +560,17 @@ userAuthLoop:
 				return nil, parseError(msgUserAuthRequest)
 			}
 
-			perms, authErr = config.PasswordCallback(s, password)
+			perms, authErr = authConfig.PasswordCallback(s, password)
 		case "keyboard-interactive":
-			if config.KeyboardInteractiveCallback == nil {
+			if authConfig.KeyboardInteractiveCallback == nil {
 				authErr = errors.New("ssh: keyboard-interactive auth not configured")
 				break
 			}
 
 			prompter := &sshClientKeyboardInteractive{s}
-			perms, authErr = config.KeyboardInteractiveCallback(s, prompter.Challenge)
+			perms, authErr = authConfig.KeyboardInteractiveCallback(s, prompter.Challenge)
 		case "publickey":
-			if config.PublicKeyCallback == nil {
+			if authConfig.PublicKeyCallback == nil {
 				authErr = errors.New("ssh: publickey auth not configured")
 				break
 			}
@@ -562,11 +604,18 @@ userAuthLoop:
 			if !ok {
 				candidate.user = s.user
 				candidate.pubKeyData = pubKeyData
-				candidate.perms, candidate.result = config.PublicKeyCallback(s, pubKey)
-				if candidate.result == nil && candidate.perms != nil && candidate.perms.CriticalOptions != nil && candidate.perms.CriticalOptions[sourceAddressCriticalOption] != "" {
-					candidate.result = checkSourceAddress(
+				candidate.perms, candidate.result = authConfig.PublicKeyCallback(s, pubKey)
+				_, isPartialSuccessError := candidate.result.(*PartialSuccessError)
+
+				if (candidate.result == nil || isPartialSuccessError) &&
+					candidate.perms != nil &&
+					candidate.perms.CriticalOptions != nil &&
+					candidate.perms.CriticalOptions[sourceAddressCriticalOption] != "" {
+					if err := checkSourceAddress(
 						s.RemoteAddr(),
-						candidate.perms.CriticalOptions[sourceAddressCriticalOption])
+						candidate.perms.CriticalOptions[sourceAddressCriticalOption]); err != nil {
+						candidate.result = err
+					}
 				}
 				cache.add(candidate)
 			}
@@ -578,8 +627,8 @@ userAuthLoop:
 				if len(payload) > 0 {
 					return nil, parseError(msgUserAuthRequest)
 				}
-
-				if candidate.result == nil {
+				_, isPartialSuccessError := candidate.result.(*PartialSuccessError)
+				if candidate.result == nil || isPartialSuccessError {
 					okMsg := userAuthPubKeyOkMsg{
 						Algo:   algo,
 						PubKey: pubKeyData,
@@ -629,11 +678,11 @@ userAuthLoop:
 				perms = candidate.perms
 			}
 		case "gssapi-with-mic":
-			if config.GSSAPIWithMICConfig == nil {
+			if authConfig.GSSAPIWithMICConfig == nil {
 				authErr = errors.New("ssh: gssapi-with-mic auth not configured")
 				break
 			}
-			gssapiConfig := config.GSSAPIWithMICConfig
+			gssapiConfig := authConfig.GSSAPIWithMICConfig
 			userAuthRequestGSSAPI, err := parseGSSAPIPayload(userAuthReq.Payload)
 			if err != nil {
 				return nil, parseError(msgUserAuthRequest)
@@ -689,49 +738,70 @@ userAuthLoop:
 			break userAuthLoop
 		}
 
-		authFailures++
-		if config.MaxAuthTries > 0 && authFailures >= config.MaxAuthTries {
-			// If we have hit the max attempts, don't bother sending the
-			// final SSH_MSG_USERAUTH_FAILURE message, since there are
-			// no more authentication methods which can be attempted,
-			// and this message may cause the client to re-attempt
-			// authentication while we send the disconnect message.
-			// Continue, and trigger the disconnect at the start of
-			// the loop.
-			//
-			// The SSH specification is somewhat confusing about this,
-			// RFC 4252 Section 5.1 requires each authentication failure
-			// be responded to with a respective SSH_MSG_USERAUTH_FAILURE
-			// message, but Section 4 says the server should disconnect
-			// after some number of attempts, but it isn't explicit which
-			// message should take precedence (i.e. should there be a failure
-			// message than a disconnect message, or if we are going to
-			// disconnect, should we only send that message.)
-			//
-			// Either way, OpenSSH disconnects immediately after the last
-			// failed authnetication attempt, and given they are typically
-			// considered the golden implementation it seems reasonable
-			// to match that behavior.
-			continue
+		var failureMsg userAuthFailureMsg
+
+		if partialSuccess, ok := authErr.(*PartialSuccessError); ok {
+			// After a partial success error we don't allow changing the user
+			// name and execute the NoClientAuthCallback.
+			partialSuccessReturned = true
+
+			// In case a partial success is returned, the server may send
+			// a new set of authentication methods.
+			authConfig = partialSuccess.Next
+
+			// Reset pubkey cache, as the new PublicKeyCallback might
+			// accept a different set of public keys.
+			cache = pubKeyCache{}
+
+			// Send back a partial success message to the user.
+			failureMsg.PartialSuccess = true
+		} else {
+			// Allow initial attempt of 'none' without penalty.
+			if authFailures > 0 || userAuthReq.Method != "none" || noneAuthCount != 1 {
+				authFailures++
+			}
+			if config.MaxAuthTries > 0 && authFailures >= config.MaxAuthTries {
+				// If we have hit the max attempts, don't bother sending the
+				// final SSH_MSG_USERAUTH_FAILURE message, since there are
+				// no more authentication methods which can be attempted,
+				// and this message may cause the client to re-attempt
+				// authentication while we send the disconnect message.
+				// Continue, and trigger the disconnect at the start of
+				// the loop.
+				//
+				// The SSH specification is somewhat confusing about this,
+				// RFC 4252 Section 5.1 requires each authentication failure
+				// be responded to with a respective SSH_MSG_USERAUTH_FAILURE
+				// message, but Section 4 says the server should disconnect
+				// after some number of attempts, but it isn't explicit which
+				// message should take precedence (i.e. should there be a failure
+				// message than a disconnect message, or if we are going to
+				// disconnect, should we only send that message.)
+				//
+				// Either way, OpenSSH disconnects immediately after the last
+				// failed authentication attempt, and given they are typically
+				// considered the golden implementation it seems reasonable
+				// to match that behavior.
+				continue
+			}
 		}
 
-		var failureMsg userAuthFailureMsg
-		if config.PasswordCallback != nil {
+		if authConfig.PasswordCallback != nil {
 			failureMsg.Methods = append(failureMsg.Methods, "password")
 		}
-		if config.PublicKeyCallback != nil {
+		if authConfig.PublicKeyCallback != nil {
 			failureMsg.Methods = append(failureMsg.Methods, "publickey")
 		}
-		if config.KeyboardInteractiveCallback != nil {
+		if authConfig.KeyboardInteractiveCallback != nil {
 			failureMsg.Methods = append(failureMsg.Methods, "keyboard-interactive")
 		}
-		if config.GSSAPIWithMICConfig != nil && config.GSSAPIWithMICConfig.Server != nil &&
-			config.GSSAPIWithMICConfig.AllowLogin != nil {
+		if authConfig.GSSAPIWithMICConfig != nil && authConfig.GSSAPIWithMICConfig.Server != nil &&
+			authConfig.GSSAPIWithMICConfig.AllowLogin != nil {
 			failureMsg.Methods = append(failureMsg.Methods, "gssapi-with-mic")
 		}
 
 		if len(failureMsg.Methods) == 0 {
-			return nil, errors.New("ssh: no authentication methods configured but NoClientAuth is also false")
+			return nil, errors.New("ssh: no authentication methods available")
 		}
 
 		if err := s.transport.writePacket(Marshal(&failureMsg)); err != nil {
diff --git a/vendor/golang.org/x/sys/unix/mmap_nomremap.go b/vendor/golang.org/x/sys/unix/mmap_nomremap.go
index 4b68e5978..7f602ffd2 100644
--- a/vendor/golang.org/x/sys/unix/mmap_nomremap.go
+++ b/vendor/golang.org/x/sys/unix/mmap_nomremap.go
@@ -2,7 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-//go:build aix || darwin || dragonfly || freebsd || openbsd || solaris
+//go:build aix || darwin || dragonfly || freebsd || openbsd || solaris || zos
 
 package unix
 
diff --git a/vendor/golang.org/x/sys/unix/syscall_zos_s390x.go b/vendor/golang.org/x/sys/unix/syscall_zos_s390x.go
index b473038c6..27c41b6f0 100644
--- a/vendor/golang.org/x/sys/unix/syscall_zos_s390x.go
+++ b/vendor/golang.org/x/sys/unix/syscall_zos_s390x.go
@@ -1520,6 +1520,14 @@ func (m *mmapper) Munmap(data []byte) (err error) {
 	return nil
 }
 
+func Mmap(fd int, offset int64, length int, prot int, flags int) (data []byte, err error) {
+        return mapper.Mmap(fd, offset, length, prot, flags)
+}
+
+func Munmap(b []byte) (err error) {
+        return mapper.Munmap(b)
+}
+
 func Read(fd int, p []byte) (n int, err error) {
 	n, err = read(fd, p)
 	if raceenabled {
diff --git a/vendor/golang.org/x/sys/windows/syscall_windows.go b/vendor/golang.org/x/sys/windows/syscall_windows.go
index 6395a031d..6525c62f3 100644
--- a/vendor/golang.org/x/sys/windows/syscall_windows.go
+++ b/vendor/golang.org/x/sys/windows/syscall_windows.go
@@ -165,6 +165,7 @@ func NewCallbackCDecl(fn interface{}) uintptr {
 //sys	CreateFile(name *uint16, access uint32, mode uint32, sa *SecurityAttributes, createmode uint32, attrs uint32, templatefile Handle) (handle Handle, err error) [failretval==InvalidHandle] = CreateFileW
 //sys	CreateNamedPipe(name *uint16, flags uint32, pipeMode uint32, maxInstances uint32, outSize uint32, inSize uint32, defaultTimeout uint32, sa *SecurityAttributes) (handle Handle, err error)  [failretval==InvalidHandle] = CreateNamedPipeW
 //sys	ConnectNamedPipe(pipe Handle, overlapped *Overlapped) (err error)
+//sys	DisconnectNamedPipe(pipe Handle) (err error)
 //sys	GetNamedPipeInfo(pipe Handle, flags *uint32, outSize *uint32, inSize *uint32, maxInstances *uint32) (err error)
 //sys	GetNamedPipeHandleState(pipe Handle, state *uint32, curInstances *uint32, maxCollectionCount *uint32, collectDataTimeout *uint32, userName *uint16, maxUserNameSize uint32) (err error) = GetNamedPipeHandleStateW
 //sys	SetNamedPipeHandleState(pipe Handle, state *uint32, maxCollectionCount *uint32, collectDataTimeout *uint32) (err error) = SetNamedPipeHandleState
@@ -348,8 +349,19 @@ func NewCallbackCDecl(fn interface{}) uintptr {
 //sys	SetProcessPriorityBoost(process Handle, disable bool) (err error) = kernel32.SetProcessPriorityBoost
 //sys	GetProcessWorkingSetSizeEx(hProcess Handle, lpMinimumWorkingSetSize *uintptr, lpMaximumWorkingSetSize *uintptr, flags *uint32)
 //sys	SetProcessWorkingSetSizeEx(hProcess Handle, dwMinimumWorkingSetSize uintptr, dwMaximumWorkingSetSize uintptr, flags uint32) (err error)
+//sys	ClearCommBreak(handle Handle) (err error)
+//sys	ClearCommError(handle Handle, lpErrors *uint32, lpStat *ComStat) (err error)
+//sys	EscapeCommFunction(handle Handle, dwFunc uint32) (err error)
+//sys	GetCommState(handle Handle, lpDCB *DCB) (err error)
+//sys	GetCommModemStatus(handle Handle, lpModemStat *uint32) (err error)
 //sys	GetCommTimeouts(handle Handle, timeouts *CommTimeouts) (err error)
+//sys	PurgeComm(handle Handle, dwFlags uint32) (err error)
+//sys	SetCommBreak(handle Handle) (err error)
+//sys	SetCommMask(handle Handle, dwEvtMask uint32) (err error)
+//sys	SetCommState(handle Handle, lpDCB *DCB) (err error)
 //sys	SetCommTimeouts(handle Handle, timeouts *CommTimeouts) (err error)
+//sys	SetupComm(handle Handle, dwInQueue uint32, dwOutQueue uint32) (err error)
+//sys	WaitCommEvent(handle Handle, lpEvtMask *uint32, lpOverlapped *Overlapped) (err error)
 //sys	GetActiveProcessorCount(groupNumber uint16) (ret uint32)
 //sys	GetMaximumProcessorCount(groupNumber uint16) (ret uint32)
 //sys	EnumWindows(enumFunc uintptr, param unsafe.Pointer) (err error) = user32.EnumWindows
@@ -1834,3 +1846,73 @@ func ResizePseudoConsole(pconsole Handle, size Coord) error {
 	// accept arguments that can be casted to uintptr, and Coord can't.
 	return resizePseudoConsole(pconsole, *((*uint32)(unsafe.Pointer(&size))))
 }
+
+// DCB constants. See https://learn.microsoft.com/en-us/windows/win32/api/winbase/ns-winbase-dcb.
+const (
+	CBR_110    = 110
+	CBR_300    = 300
+	CBR_600    = 600
+	CBR_1200   = 1200
+	CBR_2400   = 2400
+	CBR_4800   = 4800
+	CBR_9600   = 9600
+	CBR_14400  = 14400
+	CBR_19200  = 19200
+	CBR_38400  = 38400
+	CBR_57600  = 57600
+	CBR_115200 = 115200
+	CBR_128000 = 128000
+	CBR_256000 = 256000
+
+	DTR_CONTROL_DISABLE   = 0x00000000
+	DTR_CONTROL_ENABLE    = 0x00000010
+	DTR_CONTROL_HANDSHAKE = 0x00000020
+
+	RTS_CONTROL_DISABLE   = 0x00000000
+	RTS_CONTROL_ENABLE    = 0x00001000
+	RTS_CONTROL_HANDSHAKE = 0x00002000
+	RTS_CONTROL_TOGGLE    = 0x00003000
+
+	NOPARITY    = 0
+	ODDPARITY   = 1
+	EVENPARITY  = 2
+	MARKPARITY  = 3
+	SPACEPARITY = 4
+
+	ONESTOPBIT   = 0
+	ONE5STOPBITS = 1
+	TWOSTOPBITS  = 2
+)
+
+// EscapeCommFunction constants. See https://learn.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-escapecommfunction.
+const (
+	SETXOFF  = 1
+	SETXON   = 2
+	SETRTS   = 3
+	CLRRTS   = 4
+	SETDTR   = 5
+	CLRDTR   = 6
+	SETBREAK = 8
+	CLRBREAK = 9
+)
+
+// PurgeComm constants. See https://learn.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-purgecomm.
+const (
+	PURGE_TXABORT = 0x0001
+	PURGE_RXABORT = 0x0002
+	PURGE_TXCLEAR = 0x0004
+	PURGE_RXCLEAR = 0x0008
+)
+
+// SetCommMask constants. See https://learn.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-setcommmask.
+const (
+	EV_RXCHAR  = 0x0001
+	EV_RXFLAG  = 0x0002
+	EV_TXEMPTY = 0x0004
+	EV_CTS     = 0x0008
+	EV_DSR     = 0x0010
+	EV_RLSD    = 0x0020
+	EV_BREAK   = 0x0040
+	EV_ERR     = 0x0080
+	EV_RING    = 0x0100
+)
diff --git a/vendor/golang.org/x/sys/windows/types_windows.go b/vendor/golang.org/x/sys/windows/types_windows.go
index 359780f6a..d8cb71db0 100644
--- a/vendor/golang.org/x/sys/windows/types_windows.go
+++ b/vendor/golang.org/x/sys/windows/types_windows.go
@@ -3380,3 +3380,27 @@ type BLOB struct {
 	Size     uint32
 	BlobData *byte
 }
+
+type ComStat struct {
+	Flags    uint32
+	CBInQue  uint32
+	CBOutQue uint32
+}
+
+type DCB struct {
+	DCBlength  uint32
+	BaudRate   uint32
+	Flags      uint32
+	wReserved  uint16
+	XonLim     uint16
+	XoffLim    uint16
+	ByteSize   uint8
+	Parity     uint8
+	StopBits   uint8
+	XonChar    byte
+	XoffChar   byte
+	ErrorChar  byte
+	EofChar    byte
+	EvtChar    byte
+	wReserved1 uint16
+}
diff --git a/vendor/golang.org/x/sys/windows/zsyscall_windows.go b/vendor/golang.org/x/sys/windows/zsyscall_windows.go
index e8791c82c..5c6035ddf 100644
--- a/vendor/golang.org/x/sys/windows/zsyscall_windows.go
+++ b/vendor/golang.org/x/sys/windows/zsyscall_windows.go
@@ -188,6 +188,8 @@ var (
 	procAssignProcessToJobObject                             = modkernel32.NewProc("AssignProcessToJobObject")
 	procCancelIo                                             = modkernel32.NewProc("CancelIo")
 	procCancelIoEx                                           = modkernel32.NewProc("CancelIoEx")
+	procClearCommBreak                                       = modkernel32.NewProc("ClearCommBreak")
+	procClearCommError                                       = modkernel32.NewProc("ClearCommError")
 	procCloseHandle                                          = modkernel32.NewProc("CloseHandle")
 	procClosePseudoConsole                                   = modkernel32.NewProc("ClosePseudoConsole")
 	procConnectNamedPipe                                     = modkernel32.NewProc("ConnectNamedPipe")
@@ -212,7 +214,9 @@ var (
 	procDeleteProcThreadAttributeList                        = modkernel32.NewProc("DeleteProcThreadAttributeList")
 	procDeleteVolumeMountPointW                              = modkernel32.NewProc("DeleteVolumeMountPointW")
 	procDeviceIoControl                                      = modkernel32.NewProc("DeviceIoControl")
+	procDisconnectNamedPipe                                  = modkernel32.NewProc("DisconnectNamedPipe")
 	procDuplicateHandle                                      = modkernel32.NewProc("DuplicateHandle")
+	procEscapeCommFunction                                   = modkernel32.NewProc("EscapeCommFunction")
 	procExitProcess                                          = modkernel32.NewProc("ExitProcess")
 	procExpandEnvironmentStringsW                            = modkernel32.NewProc("ExpandEnvironmentStringsW")
 	procFindClose                                            = modkernel32.NewProc("FindClose")
@@ -236,6 +240,8 @@ var (
 	procGenerateConsoleCtrlEvent                             = modkernel32.NewProc("GenerateConsoleCtrlEvent")
 	procGetACP                                               = modkernel32.NewProc("GetACP")
 	procGetActiveProcessorCount                              = modkernel32.NewProc("GetActiveProcessorCount")
+	procGetCommModemStatus                                   = modkernel32.NewProc("GetCommModemStatus")
+	procGetCommState                                         = modkernel32.NewProc("GetCommState")
 	procGetCommTimeouts                                      = modkernel32.NewProc("GetCommTimeouts")
 	procGetCommandLineW                                      = modkernel32.NewProc("GetCommandLineW")
 	procGetComputerNameExW                                   = modkernel32.NewProc("GetComputerNameExW")
@@ -322,6 +328,7 @@ var (
 	procProcess32NextW                                       = modkernel32.NewProc("Process32NextW")
 	procProcessIdToSessionId                                 = modkernel32.NewProc("ProcessIdToSessionId")
 	procPulseEvent                                           = modkernel32.NewProc("PulseEvent")
+	procPurgeComm                                            = modkernel32.NewProc("PurgeComm")
 	procQueryDosDeviceW                                      = modkernel32.NewProc("QueryDosDeviceW")
 	procQueryFullProcessImageNameW                           = modkernel32.NewProc("QueryFullProcessImageNameW")
 	procQueryInformationJobObject                            = modkernel32.NewProc("QueryInformationJobObject")
@@ -335,6 +342,9 @@ var (
 	procResetEvent                                           = modkernel32.NewProc("ResetEvent")
 	procResizePseudoConsole                                  = modkernel32.NewProc("ResizePseudoConsole")
 	procResumeThread                                         = modkernel32.NewProc("ResumeThread")
+	procSetCommBreak                                         = modkernel32.NewProc("SetCommBreak")
+	procSetCommMask                                          = modkernel32.NewProc("SetCommMask")
+	procSetCommState                                         = modkernel32.NewProc("SetCommState")
 	procSetCommTimeouts                                      = modkernel32.NewProc("SetCommTimeouts")
 	procSetConsoleCursorPosition                             = modkernel32.NewProc("SetConsoleCursorPosition")
 	procSetConsoleMode                                       = modkernel32.NewProc("SetConsoleMode")
@@ -342,7 +352,6 @@ var (
 	procSetDefaultDllDirectories                             = modkernel32.NewProc("SetDefaultDllDirectories")
 	procSetDllDirectoryW                                     = modkernel32.NewProc("SetDllDirectoryW")
 	procSetEndOfFile                                         = modkernel32.NewProc("SetEndOfFile")
-	procSetFileValidData                                     = modkernel32.NewProc("SetFileValidData")
 	procSetEnvironmentVariableW                              = modkernel32.NewProc("SetEnvironmentVariableW")
 	procSetErrorMode                                         = modkernel32.NewProc("SetErrorMode")
 	procSetEvent                                             = modkernel32.NewProc("SetEvent")
@@ -351,6 +360,7 @@ var (
 	procSetFileInformationByHandle                           = modkernel32.NewProc("SetFileInformationByHandle")
 	procSetFilePointer                                       = modkernel32.NewProc("SetFilePointer")
 	procSetFileTime                                          = modkernel32.NewProc("SetFileTime")
+	procSetFileValidData                                     = modkernel32.NewProc("SetFileValidData")
 	procSetHandleInformation                                 = modkernel32.NewProc("SetHandleInformation")
 	procSetInformationJobObject                              = modkernel32.NewProc("SetInformationJobObject")
 	procSetNamedPipeHandleState                              = modkernel32.NewProc("SetNamedPipeHandleState")
@@ -361,6 +371,7 @@ var (
 	procSetStdHandle                                         = modkernel32.NewProc("SetStdHandle")
 	procSetVolumeLabelW                                      = modkernel32.NewProc("SetVolumeLabelW")
 	procSetVolumeMountPointW                                 = modkernel32.NewProc("SetVolumeMountPointW")
+	procSetupComm                                            = modkernel32.NewProc("SetupComm")
 	procSizeofResource                                       = modkernel32.NewProc("SizeofResource")
 	procSleepEx                                              = modkernel32.NewProc("SleepEx")
 	procTerminateJobObject                                   = modkernel32.NewProc("TerminateJobObject")
@@ -379,6 +390,7 @@ var (
 	procVirtualQueryEx                                       = modkernel32.NewProc("VirtualQueryEx")
 	procVirtualUnlock                                        = modkernel32.NewProc("VirtualUnlock")
 	procWTSGetActiveConsoleSessionId                         = modkernel32.NewProc("WTSGetActiveConsoleSessionId")
+	procWaitCommEvent                                        = modkernel32.NewProc("WaitCommEvent")
 	procWaitForMultipleObjects                               = modkernel32.NewProc("WaitForMultipleObjects")
 	procWaitForSingleObject                                  = modkernel32.NewProc("WaitForSingleObject")
 	procWriteConsoleW                                        = modkernel32.NewProc("WriteConsoleW")
@@ -1641,6 +1653,22 @@ func CancelIoEx(s Handle, o *Overlapped) (err error) {
 	return
 }
 
+func ClearCommBreak(handle Handle) (err error) {
+	r1, _, e1 := syscall.Syscall(procClearCommBreak.Addr(), 1, uintptr(handle), 0, 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
+func ClearCommError(handle Handle, lpErrors *uint32, lpStat *ComStat) (err error) {
+	r1, _, e1 := syscall.Syscall(procClearCommError.Addr(), 3, uintptr(handle), uintptr(unsafe.Pointer(lpErrors)), uintptr(unsafe.Pointer(lpStat)))
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func CloseHandle(handle Handle) (err error) {
 	r1, _, e1 := syscall.Syscall(procCloseHandle.Addr(), 1, uintptr(handle), 0, 0)
 	if r1 == 0 {
@@ -1845,6 +1873,14 @@ func DeviceIoControl(handle Handle, ioControlCode uint32, inBuffer *byte, inBuff
 	return
 }
 
+func DisconnectNamedPipe(pipe Handle) (err error) {
+	r1, _, e1 := syscall.Syscall(procDisconnectNamedPipe.Addr(), 1, uintptr(pipe), 0, 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func DuplicateHandle(hSourceProcessHandle Handle, hSourceHandle Handle, hTargetProcessHandle Handle, lpTargetHandle *Handle, dwDesiredAccess uint32, bInheritHandle bool, dwOptions uint32) (err error) {
 	var _p0 uint32
 	if bInheritHandle {
@@ -1857,6 +1893,14 @@ func DuplicateHandle(hSourceProcessHandle Handle, hSourceHandle Handle, hTargetP
 	return
 }
 
+func EscapeCommFunction(handle Handle, dwFunc uint32) (err error) {
+	r1, _, e1 := syscall.Syscall(procEscapeCommFunction.Addr(), 2, uintptr(handle), uintptr(dwFunc), 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func ExitProcess(exitcode uint32) {
 	syscall.Syscall(procExitProcess.Addr(), 1, uintptr(exitcode), 0, 0)
 	return
@@ -2058,6 +2102,22 @@ func GetActiveProcessorCount(groupNumber uint16) (ret uint32) {
 	return
 }
 
+func GetCommModemStatus(handle Handle, lpModemStat *uint32) (err error) {
+	r1, _, e1 := syscall.Syscall(procGetCommModemStatus.Addr(), 2, uintptr(handle), uintptr(unsafe.Pointer(lpModemStat)), 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
+func GetCommState(handle Handle, lpDCB *DCB) (err error) {
+	r1, _, e1 := syscall.Syscall(procGetCommState.Addr(), 2, uintptr(handle), uintptr(unsafe.Pointer(lpDCB)), 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func GetCommTimeouts(handle Handle, timeouts *CommTimeouts) (err error) {
 	r1, _, e1 := syscall.Syscall(procGetCommTimeouts.Addr(), 2, uintptr(handle), uintptr(unsafe.Pointer(timeouts)), 0)
 	if r1 == 0 {
@@ -2810,6 +2870,14 @@ func PulseEvent(event Handle) (err error) {
 	return
 }
 
+func PurgeComm(handle Handle, dwFlags uint32) (err error) {
+	r1, _, e1 := syscall.Syscall(procPurgeComm.Addr(), 2, uintptr(handle), uintptr(dwFlags), 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func QueryDosDevice(deviceName *uint16, targetPath *uint16, max uint32) (n uint32, err error) {
 	r0, _, e1 := syscall.Syscall(procQueryDosDeviceW.Addr(), 3, uintptr(unsafe.Pointer(deviceName)), uintptr(unsafe.Pointer(targetPath)), uintptr(max))
 	n = uint32(r0)
@@ -2924,6 +2992,30 @@ func ResumeThread(thread Handle) (ret uint32, err error) {
 	return
 }
 
+func SetCommBreak(handle Handle) (err error) {
+	r1, _, e1 := syscall.Syscall(procSetCommBreak.Addr(), 1, uintptr(handle), 0, 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
+func SetCommMask(handle Handle, dwEvtMask uint32) (err error) {
+	r1, _, e1 := syscall.Syscall(procSetCommMask.Addr(), 2, uintptr(handle), uintptr(dwEvtMask), 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
+func SetCommState(handle Handle, lpDCB *DCB) (err error) {
+	r1, _, e1 := syscall.Syscall(procSetCommState.Addr(), 2, uintptr(handle), uintptr(unsafe.Pointer(lpDCB)), 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func SetCommTimeouts(handle Handle, timeouts *CommTimeouts) (err error) {
 	r1, _, e1 := syscall.Syscall(procSetCommTimeouts.Addr(), 2, uintptr(handle), uintptr(unsafe.Pointer(timeouts)), 0)
 	if r1 == 0 {
@@ -2989,14 +3081,6 @@ func SetEndOfFile(handle Handle) (err error) {
 	return
 }
 
-func SetFileValidData(handle Handle, validDataLength int64) (err error) {
-	r1, _, e1 := syscall.Syscall(procSetFileValidData.Addr(), 2, uintptr(handle), uintptr(validDataLength), 0)
-	if r1 == 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
 func SetEnvironmentVariable(name *uint16, value *uint16) (err error) {
 	r1, _, e1 := syscall.Syscall(procSetEnvironmentVariableW.Addr(), 2, uintptr(unsafe.Pointer(name)), uintptr(unsafe.Pointer(value)), 0)
 	if r1 == 0 {
@@ -3060,6 +3144,14 @@ func SetFileTime(handle Handle, ctime *Filetime, atime *Filetime, wtime *Filetim
 	return
 }
 
+func SetFileValidData(handle Handle, validDataLength int64) (err error) {
+	r1, _, e1 := syscall.Syscall(procSetFileValidData.Addr(), 2, uintptr(handle), uintptr(validDataLength), 0)
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func SetHandleInformation(handle Handle, mask uint32, flags uint32) (err error) {
 	r1, _, e1 := syscall.Syscall(procSetHandleInformation.Addr(), 3, uintptr(handle), uintptr(mask), uintptr(flags))
 	if r1 == 0 {
@@ -3145,6 +3237,14 @@ func SetVolumeMountPoint(volumeMountPoint *uint16, volumeName *uint16) (err erro
 	return
 }
 
+func SetupComm(handle Handle, dwInQueue uint32, dwOutQueue uint32) (err error) {
+	r1, _, e1 := syscall.Syscall(procSetupComm.Addr(), 3, uintptr(handle), uintptr(dwInQueue), uintptr(dwOutQueue))
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func SizeofResource(module Handle, resInfo Handle) (size uint32, err error) {
 	r0, _, e1 := syscall.Syscall(procSizeofResource.Addr(), 2, uintptr(module), uintptr(resInfo), 0)
 	size = uint32(r0)
@@ -3291,6 +3391,14 @@ func WTSGetActiveConsoleSessionId() (sessionID uint32) {
 	return
 }
 
+func WaitCommEvent(handle Handle, lpEvtMask *uint32, lpOverlapped *Overlapped) (err error) {
+	r1, _, e1 := syscall.Syscall(procWaitCommEvent.Addr(), 3, uintptr(handle), uintptr(unsafe.Pointer(lpEvtMask)), uintptr(unsafe.Pointer(lpOverlapped)))
+	if r1 == 0 {
+		err = errnoErr(e1)
+	}
+	return
+}
+
 func waitForMultipleObjects(count uint32, handles uintptr, waitAll bool, waitMilliseconds uint32) (event uint32, err error) {
 	var _p0 uint32
 	if waitAll {