[chore] bump gruf/go-store to v2 (#953)

* [chore] bump gruf/go-store to v2

* no more boobs

8 files changed, 284 insertions, 0 deletions

diff --git a/vendor/github.com/klauspost/compress/snappy/.gitignore b/vendor/github.com/klauspost/compress/snappy/.gitignore
new file mode 100644
index 000000000..042091d9b
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/.gitignore
@@ -0,0 +1,16 @@
+cmd/snappytool/snappytool
+testdata/bench
+
+# These explicitly listed benchmark data files are for an obsolete version of
+# snappy_test.go.
+testdata/alice29.txt
+testdata/asyoulik.txt
+testdata/fireworks.jpeg
+testdata/geo.protodata
+testdata/html
+testdata/html_x_4
+testdata/kppkn.gtb
+testdata/lcet10.txt
+testdata/paper-100k.pdf
+testdata/plrabn12.txt
+testdata/urls.10K
diff --git a/vendor/github.com/klauspost/compress/snappy/AUTHORS b/vendor/github.com/klauspost/compress/snappy/AUTHORS
new file mode 100644
index 000000000..52ccb5a93
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/AUTHORS
@@ -0,0 +1,18 @@
+# This is the official list of Snappy-Go authors for copyright purposes.
+# This file is distinct from the CONTRIBUTORS files.
+# See the latter for an explanation.
+
+# Names should be added to this file as
+#	Name or Organization <email address>
+# The email address is not required for organizations.
+
+# Please keep the list sorted.
+
+Amazon.com, Inc
+Damian Gryski <dgryski@gmail.com>
+Eric Buth <eric@topos.com>
+Google Inc.
+Jan Mercl <0xjnml@gmail.com>
+Klaus Post <klauspost@gmail.com>
+Rodolfo Carvalho <rhcarvalho@gmail.com>
+Sebastien Binet <seb.binet@gmail.com>
diff --git a/vendor/github.com/klauspost/compress/snappy/CONTRIBUTORS b/vendor/github.com/klauspost/compress/snappy/CONTRIBUTORS
new file mode 100644
index 000000000..ea6524ddd
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/CONTRIBUTORS
@@ -0,0 +1,41 @@
+# This is the official list of people who can contribute
+# (and typically have contributed) code to the Snappy-Go repository.
+# The AUTHORS file lists the copyright holders; this file
+# lists people.  For example, Google employees are listed here
+# but not in AUTHORS, because Google holds the copyright.
+#
+# The submission process automatically checks to make sure
+# that people submitting code are listed in this file (by email address).
+#
+# Names should be added to this file only after verifying that
+# the individual or the individual's organization has agreed to
+# the appropriate Contributor License Agreement, found here:
+#
+#     http://code.google.com/legal/individual-cla-v1.0.html
+#     http://code.google.com/legal/corporate-cla-v1.0.html
+#
+# The agreement for individuals can be filled out on the web.
+#
+# When adding J Random Contributor's name to this file,
+# either J's name or J's organization's name should be
+# added to the AUTHORS file, depending on whether the
+# individual or corporate CLA was used.
+
+# Names should be added to this file like so:
+#     Name <email address>
+
+# Please keep the list sorted.
+
+Alex Legg <alexlegg@google.com>
+Damian Gryski <dgryski@gmail.com>
+Eric Buth <eric@topos.com>
+Jan Mercl <0xjnml@gmail.com>
+Jonathan Swinney <jswinney@amazon.com>
+Kai Backman <kaib@golang.org>
+Klaus Post <klauspost@gmail.com>
+Marc-Antoine Ruel <maruel@chromium.org>
+Nigel Tao <nigeltao@golang.org>
+Rob Pike <r@golang.org>
+Rodolfo Carvalho <rhcarvalho@gmail.com>
+Russ Cox <rsc@golang.org>
+Sebastien Binet <seb.binet@gmail.com>
diff --git a/vendor/github.com/klauspost/compress/snappy/LICENSE b/vendor/github.com/klauspost/compress/snappy/LICENSE
new file mode 100644
index 000000000..6050c10f4
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/LICENSE
@@ -0,0 +1,27 @@
+Copyright (c) 2011 The Snappy-Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/vendor/github.com/klauspost/compress/snappy/README.md b/vendor/github.com/klauspost/compress/snappy/README.md
new file mode 100644
index 000000000..8271bbd09
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/README.md
@@ -0,0 +1,17 @@
+# snappy
+
+The Snappy compression format in the Go programming language.
+
+This is a drop-in replacement for `github.com/golang/snappy`.
+
+It provides a full, compatible replacement of the Snappy package by simply changing imports.
+
+See [Snappy Compatibility](https://github.com/klauspost/compress/tree/master/s2#snappy-compatibility) in the S2 documentation.
+
+"Better" compression mode is used. For buffered streams concurrent compression is used.
+
+For more options use the [s2 package](https://pkg.go.dev/github.com/klauspost/compress/s2).
+
+# usage
+
+Replace imports `github.com/golang/snappy` with `github.com/klauspost/compress/snappy`.
diff --git a/vendor/github.com/klauspost/compress/snappy/decode.go b/vendor/github.com/klauspost/compress/snappy/decode.go
new file mode 100644
index 000000000..89f1fa234
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/decode.go
@@ -0,0 +1,60 @@
+// Copyright 2011 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package snappy
+
+import (
+	"io"
+
+	"github.com/klauspost/compress/s2"
+)
+
+var (
+	// ErrCorrupt reports that the input is invalid.
+	ErrCorrupt = s2.ErrCorrupt
+	// ErrTooLarge reports that the uncompressed length is too large.
+	ErrTooLarge = s2.ErrTooLarge
+	// ErrUnsupported reports that the input isn't supported.
+	ErrUnsupported = s2.ErrUnsupported
+)
+
+const (
+	// maxBlockSize is the maximum size of the input to encodeBlock. It is not
+	// part of the wire format per se, but some parts of the encoder assume
+	// that an offset fits into a uint16.
+	//
+	// Also, for the framing format (Writer type instead of Encode function),
+	// https://github.com/google/snappy/blob/master/framing_format.txt says
+	// that "the uncompressed data in a chunk must be no longer than 65536
+	// bytes".
+	maxBlockSize = 65536
+)
+
+// DecodedLen returns the length of the decoded block.
+func DecodedLen(src []byte) (int, error) {
+	return s2.DecodedLen(src)
+}
+
+// Decode returns the decoded form of src. The returned slice may be a sub-
+// slice of dst if dst was large enough to hold the entire decoded block.
+// Otherwise, a newly allocated slice will be returned.
+//
+// The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Decode handles the Snappy block format, not the Snappy stream format.
+func Decode(dst, src []byte) ([]byte, error) {
+	return s2.Decode(dst, src)
+}
+
+// NewReader returns a new Reader that decompresses from r, using the framing
+// format described at
+// https://github.com/google/snappy/blob/master/framing_format.txt
+func NewReader(r io.Reader) *Reader {
+	return s2.NewReader(r, s2.ReaderMaxBlockSize(maxBlockSize))
+}
+
+// Reader is an io.Reader that can read Snappy-compressed bytes.
+//
+// Reader handles the Snappy stream format, not the Snappy block format.
+type Reader = s2.Reader
diff --git a/vendor/github.com/klauspost/compress/snappy/encode.go b/vendor/github.com/klauspost/compress/snappy/encode.go
new file mode 100644
index 000000000..e8bd72c18
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/encode.go
@@ -0,0 +1,59 @@
+// Copyright 2011 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package snappy
+
+import (
+	"io"
+
+	"github.com/klauspost/compress/s2"
+)
+
+// Encode returns the encoded form of src. The returned slice may be a sub-
+// slice of dst if dst was large enough to hold the entire encoded block.
+// Otherwise, a newly allocated slice will be returned.
+//
+// The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Encode handles the Snappy block format, not the Snappy stream format.
+func Encode(dst, src []byte) []byte {
+	return s2.EncodeSnappyBetter(dst, src)
+}
+
+// MaxEncodedLen returns the maximum length of a snappy block, given its
+// uncompressed length.
+//
+// It will return a negative value if srcLen is too large to encode.
+func MaxEncodedLen(srcLen int) int {
+	return s2.MaxEncodedLen(srcLen)
+}
+
+// NewWriter returns a new Writer that compresses to w.
+//
+// The Writer returned does not buffer writes. There is no need to Flush or
+// Close such a Writer.
+//
+// Deprecated: the Writer returned is not suitable for many small writes, only
+// for few large writes. Use NewBufferedWriter instead, which is efficient
+// regardless of the frequency and shape of the writes, and remember to Close
+// that Writer when done.
+func NewWriter(w io.Writer) *Writer {
+	return s2.NewWriter(w, s2.WriterSnappyCompat(), s2.WriterBetterCompression(), s2.WriterFlushOnWrite(), s2.WriterConcurrency(1))
+}
+
+// NewBufferedWriter returns a new Writer that compresses to w, using the
+// framing format described at
+// https://github.com/google/snappy/blob/master/framing_format.txt
+//
+// The Writer returned buffers writes. Users must call Close to guarantee all
+// data has been forwarded to the underlying io.Writer. They may also call
+// Flush zero or more times before calling Close.
+func NewBufferedWriter(w io.Writer) *Writer {
+	return s2.NewWriter(w, s2.WriterSnappyCompat(), s2.WriterBetterCompression())
+}
+
+// Writer is an io.Writer that can write Snappy-compressed bytes.
+//
+// Writer handles the Snappy stream format, not the Snappy block format.
+type Writer = s2.Writer
diff --git a/vendor/github.com/klauspost/compress/snappy/snappy.go b/vendor/github.com/klauspost/compress/snappy/snappy.go
new file mode 100644
index 000000000..398cdc95a
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/snappy/snappy.go
@@ -0,0 +1,46 @@
+// Copyright 2011 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package snappy implements the Snappy compression format. It aims for very
+// high speeds and reasonable compression.
+//
+// There are actually two Snappy formats: block and stream. They are related,
+// but different: trying to decompress block-compressed data as a Snappy stream
+// will fail, and vice versa. The block format is the Decode and Encode
+// functions and the stream format is the Reader and Writer types.
+//
+// The block format, the more common case, is used when the complete size (the
+// number of bytes) of the original data is known upfront, at the time
+// compression starts. The stream format, also known as the framing format, is
+// for when that isn't always true.
+//
+// The canonical, C++ implementation is at https://github.com/google/snappy and
+// it only implements the block format.
+package snappy
+
+/*
+Each encoded block begins with the varint-encoded length of the decoded data,
+followed by a sequence of chunks. Chunks begin and end on byte boundaries. The
+first byte of each chunk is broken into its 2 least and 6 most significant bits
+called l and m: l ranges in [0, 4) and m ranges in [0, 64). l is the chunk tag.
+Zero means a literal tag. All other values mean a copy tag.
+
+For literal tags:
+  - If m < 60, the next 1 + m bytes are literal bytes.
+  - Otherwise, let n be the little-endian unsigned integer denoted by the next
+    m - 59 bytes. The next 1 + n bytes after that are literal bytes.
+
+For copy tags, length bytes are copied from offset bytes ago, in the style of
+Lempel-Ziv compression algorithms. In particular:
+  - For l == 1, the offset ranges in [0, 1<<11) and the length in [4, 12).
+    The length is 4 + the low 3 bits of m. The high 3 bits of m form bits 8-10
+    of the offset. The next byte is bits 0-7 of the offset.
+  - For l == 2, the offset ranges in [0, 1<<16) and the length in [1, 65).
+    The length is 1 + m. The offset is the little-endian unsigned integer
+    denoted by the next 2 bytes.
+  - For l == 3, this tag is a legacy format that is no longer issued by most
+    encoders. Nonetheless, the offset ranges in [0, 1<<32) and the length in
+    [1, 65). The length is 1 + m. The offset is the little-endian unsigned
+    integer denoted by the next 4 bytes.
+*/