From nobody Mon Sep 17 00:00:00 2001 From: A U Thor Date: Fri, 9 Jun 2006 00:44:16 -0700 Subject: [PATCH] a commit. Here is a patch from A U Thor. --- foo | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/foo b/foo index 9123cdc..918dcf8 100644 --- a/foo +++ b/foo @@ -1 +1 @@ -Fri Jun 9 00:44:04 PDT 2006 +Fri Jun 9 00:44:13 PDT 2006 -- 1.4.0.g6f2b From nobody Mon Sep 17 00:00:00 2001 From: A U Thor Date: Fri, 9 Jun 2006 00:44:16 -0700 Subject: [PATCH] another patch Here is a patch from A U Thor. This addresses the issue raised in the message: From: Nit Picker Subject: foo is too old Message-Id: Hopefully this would fix the problem stated there. I have included an extra blank line above, but it does not have to be stripped away here, along with the whitespaces at the end of the above line. They are expected to be squashed when the message is made into a commit log by stripspace, Also, there are three blank lines after this paragraph, two truly blank and another full of spaces in between. Hope this helps. --- foo | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/foo b/foo index 9123cdc..918dcf8 100644 --- a/foo +++ b/foo @@ -1 +1 @@ -Fri Jun 9 00:44:04 PDT 2006 +Fri Jun 9 00:44:13 PDT 2006 -- 1.4.0.g6f2b From nobody Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Fri, 9 Jun 2006 00:44:16 -0700 Subject: re: [PATCH] another patch From: A U Thor Subject: [PATCH] third patch Here is a patch from A U Thor. This addresses the issue raised in the message: From: Nit Picker Subject: foo is too old Message-Id: Hopefully this would fix the problem stated there. --- foo | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/foo b/foo index 9123cdc..918dcf8 100644 --- a/foo +++ b/foo @@ -1 +1 @@ -Fri Jun 9 00:44:04 PDT 2006 +Fri Jun 9 00:44:13 PDT 2006 -- 1.4.0.g6f2b From nobody Sat Aug 27 23:07:49 2005 Path: news.gmane.org!not-for-mail Message-ID: <20050721.091036.01119516.yoshfuji@linux-ipv6.org> From: YOSHIFUJI Hideaki / =?iso-2022-jp?B?GyRCNUhGIzFRTEAbKEI=?= Newsgroups: gmane.comp.version-control.git Subject: [PATCH 1/2] GIT: Try all addresses for given remote name Date: Thu, 21 Jul 2005 09:10:36 -0400 (EDT) Lines: 99 Organization: USAGI/WIDE Project Approved: news@gmane.org NNTP-Posting-Host: main.gmane.org Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Trace: sea.gmane.org 1121951434 29350 80.91.229.2 (21 Jul 2005 13:10:34 GMT) X-Complaints-To: usenet@sea.gmane.org NNTP-Posting-Date: Thu, 21 Jul 2005 13:10:34 +0000 (UTC) Hello. Try all addresses for given remote name until it succeeds. Also supports IPv6. Signed-of-by: Hideaki YOSHIFUJI diff --git a/connect.c b/connect.c --- a/connect.c +++ b/connect.c @@ -96,42 +96,57 @@ static enum protocol get_protocol(const die("I don't handle protocol '%s'", name); } -static void lookup_host(const char *host, struct sockaddr *in) -{ - struct addrinfo *res; - int ret; - - ret = getaddrinfo(host, NULL, NULL, &res); - if (ret) - die("Unable to look up %s (%s)", host, gai_strerror(ret)); - *in = *res->ai_addr; - freeaddrinfo(res); -} +#define STR_(s) # s +#define STR(s) STR_(s) static int git_tcp_connect(int fd[2], const char *prog, char *host, char *path) { - struct sockaddr addr; - int port = DEFAULT_GIT_PORT, sockfd; - char *colon; - - colon = strchr(host, ':'); - if (colon) { - char *end; - unsigned long n = strtoul(colon+1, &end, 0); - if (colon[1] && !*end) { - *colon = 0; - port = n; + int sockfd = -1; + char *colon, *end; + char *port = STR(DEFAULT_GIT_PORT); + struct addrinfo hints, *ai0, *ai; + int gai; + + if (host[0] == '[') { + end = strchr(host + 1, ']'); + if (end) { + *end = 0; + end++; + host++; + } else + end = host; + } else + end = host; + colon = strchr(end, ':'); + + if (colon) + port = colon + 1; + + memset(&hints, 0, sizeof(hints)); + hints.ai_socktype = SOCK_STREAM; + hints.ai_protocol = IPPROTO_TCP; + + gai = getaddrinfo(host, port, &hints, &ai); + if (gai) + die("Unable to look up %s (%s)", host, gai_strerror(gai)); + + for (ai0 = ai; ai; ai = ai->ai_next) { + sockfd = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol); + if (sockfd < 0) + continue; + if (connect(sockfd, ai->ai_addr, ai->ai_addrlen) < 0) { + close(sockfd); + sockfd = -1; + continue; } + break; } - lookup_host(host, &addr); - ((struct sockaddr_in *)&addr)->sin_port = htons(port); + freeaddrinfo(ai0); - sockfd = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); if (sockfd < 0) die("unable to create socket (%s)", strerror(errno)); - if (connect(sockfd, (void *)&addr, sizeof(addr)) < 0) - die("unable to connect (%s)", strerror(errno)); + fd[0] = sockfd; fd[1] = sockfd; packet_write(sockfd, "%s %s\n", prog, path); -- YOSHIFUJI Hideaki @ USAGI Project GPG-FP : 9022 65EB 1ECF 3AD1 0BDF 80D8 4807 F894 E062 0EEA From nobody Sat Aug 27 23:07:49 2005 Path: news.gmane.org!not-for-mail Message-ID: From: =?iso-8859-1?Q?David_K=E5gedal?= Newsgroups: gmane.comp.version-control.git Subject: [PATCH] Fixed two bugs in git-cvsimport-script. Date: Mon, 15 Aug 2005 20:18:25 +0200 Lines: 83 Approved: news@gmane.org NNTP-Posting-Host: main.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE X-Trace: sea.gmane.org 1124130247 31839 80.91.229.2 (15 Aug 2005 18:24:07 GMT) X-Complaints-To: usenet@sea.gmane.org NNTP-Posting-Date: Mon, 15 Aug 2005 18:24:07 +0000 (UTC) Cc: "Junio C. Hamano" Original-X-From: git-owner@vger.kernel.org Mon Aug 15 20:24:05 2005 The git-cvsimport-script had a copule of small bugs that prevented me from importing a big CVS repository. The first was that it didn't handle removed files with a multi-digit primary revision number. The second was that it was asking the CVS server for "F" messages, although they were not handled. I also updated the documentation for that script to correspond to actual flags. Signed-off-by: David K=E5gedal --- Documentation/git-cvsimport-script.txt | 9 ++++++++- git-cvsimport-script | 4 ++-- 2 files changed, 10 insertions(+), 3 deletions(-) 50452f9c0c2df1f04d83a26266ba704b13861632 diff --git a/Documentation/git-cvsimport-script.txt b/Documentation/git= -cvsimport-script.txt --- a/Documentation/git-cvsimport-script.txt +++ b/Documentation/git-cvsimport-script.txt @@ -29,6 +29,10 @@ OPTIONS currently, only the :local:, :ext: and :pserver: access methods=20 are supported. =20 +-C :: + The GIT repository to import to. If the directory doesn't + exist, it will be created. Default is the current directory. + -i:: Import-only: don't perform a checkout after importing. This option ensures the working directory and cache remain untouched and will @@ -44,7 +48,7 @@ OPTIONS =20 -p :: Additional options for cvsps. - The options '-x' and '-A' are implicit and should not be used here. + The options '-u' and '-A' are implicit and should not be used here. =20 If you need to pass multiple options, separate them with a comma. =20 @@ -57,6 +61,9 @@ OPTIONS -h:: Print a short usage message and exit. =20 +-z :: + Pass the timestamp fuzz factor to cvsps. + OUTPUT ------ If '-v' is specified, the script reports what it is doing. diff --git a/git-cvsimport-script b/git-cvsimport-script --- a/git-cvsimport-script +++ b/git-cvsimport-script @@ -190,7 +190,7 @@ sub conn { $self->{'socketo'}->write("Root $repo\n"); =20 # Trial and error says that this probably is the minimum set - $self->{'socketo'}->write("Valid-responses ok error Valid-requests Mo= de M Mbinary E F Checked-in Created Updated Merged Removed\n"); + $self->{'socketo'}->write("Valid-responses ok error Valid-requests Mo= de M Mbinary E Checked-in Created Updated Merged Removed\n"); =20 $self->{'socketo'}->write("valid-requests\n"); $self->{'socketo'}->flush(); @@ -691,7 +691,7 @@ while() { unlink($tmpname); my $mode =3D pmode($cvs->{'mode'}); push(@new,[$mode, $sha, $fn]); # may be resurrected! - } elsif($state =3D=3D 9 and /^\s+(\S+):\d(?:\.\d+)+->(\d(?:\.\d+)+)\(= DEAD\)\s*$/) { + } elsif($state =3D=3D 9 and /^\s+(\S+):\d+(?:\.\d+)+->(\d+(?:\.\d+)+)= \(DEAD\)\s*$/) { my $fn =3D $1; $fn =3D~ s#^/+##; push(@old,$fn); --=20 David K=E5gedal - To unsubscribe from this list: send the line "unsubscribe git" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html From nobody Mon Sep 17 00:00:00 2001 From: A U Thor References: Date: Fri, 9 Jun 2006 00:44:16 -0700 Subject: [PATCH] a commit. Here is a patch from A U Thor. --- foo | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/foo b/foo index 9123cdc..918dcf8 100644 --- a/foo +++ b/foo @@ -1 +1 @@ -Fri Jun 9 00:44:04 PDT 2006 +Fri Jun 9 00:44:13 PDT 2006 -- 1.4.0.g6f2b From nobody Mon Sep 17 00:00:00 2001 From: A U Thor Date: Fri, 9 Jun 2006 00:44:16 -0700 Subject: [PATCH] another patch Here is an empty patch from A U Thor. From nobody Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Fri, 9 Jun 2006 00:44:16 -0700 Subject: re: [PATCH] another patch From: A U Thor Subject: [PATCH] another patch >Here is an empty patch from A U Thor. Hey you forgot the patch! From nobody Mon Sep 17 00:00:00 2001 From: A U Thor Date: Mon, 17 Sep 2001 00:00:00 +0900 Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: Quoted-Printable =0A=0AFrom: F U Bar Subject: [PATCH] updates=0A=0AThis is to fix diff-format documentation. diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt index b426a14..97756ec 100644 --- a/Documentation/diff-format.txt +++ b/Documentation/diff-format.txt @@ -81,7 +81,7 @@ The "diff" formatting options can be customized via the environment variable 'GIT_DIFF_OPTS'. For example, if you prefer context diff: =20 - GIT_DIFF_OPTS=3D-c git-diff-index -p $(cat .git/HEAD) + GIT_DIFF_OPTS=3D-c git-diff-index -p HEAD =20 =20 2. When the environment variable 'GIT_EXTERNAL_DIFF' is set, the From b9704a518e21158433baa2cc2d591fea687967f6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lukas=20Sandstr=C3=B6m?= Date: Thu, 10 Jul 2008 23:41:33 +0200 Subject: Re: discussion that lead to this patch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [PATCH] git-mailinfo: Fix getting the subject from the body "Subject: " isn't in the static array "header", and thus memcmp("Subject: ", header[i], 7) will never match. Signed-off-by: Lukas Sandström Signed-off-by: Junio C Hamano --- builtin-mailinfo.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/builtin-mailinfo.c b/builtin-mailinfo.c index 962aa34..2d1520f 100644 --- a/builtin-mailinfo.c +++ b/builtin-mailinfo.c @@ -334,7 +334,7 @@ static int check_header(char *line, unsigned linesize, char **hdr_data, int over return 1; if (!memcmp("[PATCH]", line, 7) && isspace(line[7])) { for (i = 0; header[i]; i++) { - if (!memcmp("Subject: ", header[i], 9)) { + if (!memcmp("Subject", header[i], 7)) { if (! handle_header(line, hdr_data[i], 0)) { return 1; } -- 1.5.6.2.455.g1efb2 From nobody Fri Aug 8 22:24:03 2008 Date: Fri, 8 Aug 2008 13:08:37 +0200 (CEST) From: A U Thor Subject: [PATCH 3/3 v2] Xyzzy MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="=-=-=" --=-=-= Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: quoted-printable Here comes a commit log message, and its second line is here. --- builtin-mailinfo.c | 4 ++-- diff --git a/builtin-mailinfo.c b/builtin-mailinfo.c index 3e5fe51..aabfe5c 100644 --- a/builtin-mailinfo.c +++ b/builtin-mailinfo.c @@ -758,8 +758,8 @@ static void handle_body(void) /* process any boundary lines */ if (*content_top && is_multipart_boundary(&line)) { /* flush any leftover */ - if (line.len) - handle_filter(&line); + if (prev.len) + handle_filter(&prev); =20 if (!handle_boundary()) goto handle_body_out; --=20 1.6.0.rc2 --=-=-=-- From bda@mnsspb.ru Wed Nov 12 17:54:41 2008 From: Dmitriy Blinov To: navy-patches@dinar.mns.mnsspb.ru Date: Wed, 12 Nov 2008 17:54:41 +0300 Message-Id: <1226501681-24923-1-git-send-email-bda@mnsspb.ru> X-Mailer: git-send-email 1.5.6.5 MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Subject: [Navy-patches] [PATCH] =?utf-8?b?0JjQt9C80LXQvdGR0L0g0YHQv9C40YHQvtC6INC/0LA=?= =?utf-8?b?0LrQtdGC0L7QsiDQvdC10L7QsdGF0L7QtNC40LzRi9GFINC00LvRjyA=?= =?utf-8?b?0YHQsdC+0YDQutC4?= textlive-* исправлены на texlive-* docutils заменён на python-docutils Действительно, оказалось, что rest2web вытягивает за собой python-docutils. В то время как сам rest2web не нужен. Signed-off-by: Dmitriy Blinov --- howto/build_navy.txt | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/howto/build_navy.txt b/howto/build_navy.txt index 3fd3afb..0ee807e 100644 --- a/howto/build_navy.txt +++ b/howto/build_navy.txt @@ -119,8 +119,8 @@ - libxv-dev - libusplash-dev - latex-make - - textlive-lang-cyrillic - - textlive-latex-extra + - texlive-lang-cyrillic + - texlive-latex-extra - dia - python-pyrex - libtool @@ -128,7 +128,7 @@ - sox - cython - imagemagick - - docutils + - python-docutils #. на машине dinar: добавить свой открытый ssh-ключ в authorized_keys2 пользователя ddev #. на своей машине: отредактировать /etc/sudoers (команда ``visudo``) примерно следующим образом:: -- 1.5.6.5 From nobody Mon Sep 17 00:00:00 2001 From: (A U Thor) Date: Fri, 9 Jun 2006 00:44:16 -0700 Subject: [PATCH] a patch