#!/usr/bin/perl use 5.008; use strict; use warnings; use Getopt::Std; use File::Temp qw(tempdir); use Data::Dumper; use File::Basename qw(basename dirname); use File::Spec; use Git; our ($opt_h, $opt_P, $opt_p, $opt_v, $opt_c, $opt_f, $opt_a, $opt_m, $opt_d, $opt_u, $opt_w, $opt_W, $opt_k); getopts('uhPpvcfkam:d:w:W'); $opt_h && usage(); die "Need at least one commit identifier!" unless @ARGV; # Get git-config settings my $repo = Git->repository(); $opt_w = $repo->config('cvsexportcommit.cvsdir') unless defined $opt_w; if ($opt_w || $opt_W) { # Remember where GIT_DIR is before changing to CVS checkout unless ($ENV{GIT_DIR}) { # No GIT_DIR set. Figure it out for ourselves my $gd =`git-rev-parse --git-dir`; chomp($gd); $ENV{GIT_DIR} = $gd; } # On MSYS, convert a Windows-style path to an MSYS-style path # so that rel2abs() below works correctly. if ($^O eq 'msys') { $ENV{GIT_DIR} =~ s#^([[:alpha:]]):/#/$1/#; } # Make sure GIT_DIR is absolute $ENV{GIT_DIR} = File::Spec->rel2abs($ENV{GIT_DIR}); } if ($opt_w) { if (! -d $opt_w."/CVS" ) { die "$opt_w is not a CVS checkout"; } chdir $opt_w or die "Cannot change to CVS checkout at $opt_w"; } unless ($ENV{GIT_DIR} && -r $ENV{GIT_DIR}){ die "GIT_DIR is not defined or is unreadable"; } my @cvs; if ($opt_d) { @cvs = ('cvs', '-d', $opt_d); } else { @cvs = ('cvs'); } # resolve target commit my $commit; $commit = pop @ARGV; $commit = safe_pipe_capture('git-rev-parse', '--verify', "$commit^0"); chomp $commit; if ($?) { die "The commit reference $commit did not resolve!"; } # resolve what parent we want my $parent; if (@ARGV) { $parent = pop @ARGV; $parent = safe_pipe_capture('git-rev-parse', '--verify', "$parent^0"); chomp $parent; if ($?) { die "The parent reference did not resolve!"; } } # find parents from the commit itself my @commit = safe_pipe_capture('git-cat-file', 'commit', $commit); my @parents; my $committer; my $author; my $stage = 'headers'; # headers, msg my $title; my $msg = ''; foreach my $line (@commit) { chomp $line; if ($stage eq 'headers' && $line eq '') { $stage = 'msg'; next; } if ($stage eq 'headers') { if ($line =~ m/^parent (\w{40})$/) { # found a parent push @parents, $1; } elsif ($line =~ m/^author (.+) \d+ [-+]\d+$/) { $author = $1; } elsif ($line =~ m/^committer (.+) \d+ [-+]\d+$/) { $committer = $1; } } else { $msg .= $line . "\n"; unless ($title) { $title = $line; } } } my $noparent = "0000000000000000000000000000000000000000"; if ($parent) { my $found; # double check that it's a valid parent foreach my $p (@parents) { if ($p eq $parent) { $found = 1; last; }; # found it } die "Did not find $parent in the parents for this commit!" if !$found and !$opt_P; } else { # we don't have a parent from the cmdline... if (@parents == 1) { # it's safe to get it from the commit $parent = $parents[0]; } elsif (@parents == 0) { # there is no parent $parent = $noparent; } else { # cannot choose automatically from multiple parents die "This commit has more than one parent -- please name the parent you want to use explicitly"; } } my $go_back_to = 0; if ($opt_W) { $opt_v && print "Resetting to $parent\n"; $go_back_to = `git symbolic-ref HEAD 2> /dev/null || git rev-parse HEAD` || die "Could not determine current branch"; system("git checkout -q $parent^0") && die "Could not check out $parent^0"; } $opt_v && print "Applying to CVS commit $commit from parent $parent\n"; # grab the commit message open(MSG, ">.msg") or die "Cannot open .msg for writing"; if ($opt_m) { print MSG $opt_m; } print MSG $msg; if ($opt_a) { print MSG "\n\nAuthor: $author\n"; if ($author ne $committer) { print MSG "Committer: $committer\n"; } } close MSG; if ($parent eq $noparent) { `git-diff-tree --binary -p --root $commit >.cvsexportcommit.diff`;# || die "Cannot diff"; } else { `git-diff-tree --binary -p $parent $commit >.cvsexportcommit.diff`;# || die "Cannot diff"; } ## apply non-binary changes # In pedantic mode require all lines of context to match. In normal # mode, be compatible with diff/patch: assume 3 lines of context and # require at least one line match, i.e. ignore at most 2 lines of # context, like diff/patch do by default. my $context = $opt_p ? '' : '-C1'; print "Checking if patch will apply\n"; my @stat; open APPLY, "GIT_DIR= git-apply $context --summary --numstat<.cvsexportcommit.diff|" || die "cannot patch"; @stat=<APPLY>; close APPLY || die "Cannot patch"; my (@bfiles,@files,@afiles,@dfiles); chomp @stat; foreach (@stat) { push (@bfiles,$1) if m/^-\t-\t(.*)$/; push (@files, $1) if m/^-\t-\t(.*)$/; push (@files, $1) if m/^\d+\t\d+\t(.*)$/; push (@afiles,$1) if m/^ create mode [0-7]+ (.*)$/; push (@dfiles,$1) if m/^ delete mode [0-7]+ (.*)$/; } map { s/^"(.*)"$/$1/g } @bfiles,@files; map { s/\\([0-7]{3})/sprintf('%c',oct $1)/eg } @bfiles,@files; # check that the files are clean and up to date according to cvs my $dirty; my @dirs; foreach my $p (@afiles) { my $path = dirname $p; while (!-d $path and ! grep { $_ eq $path } @dirs) { unshift @dirs, $path; $path = dirname $path; } } # ... check dirs, foreach my $d (@dirs) { if (-e $d) { $dirty = 1; warn "$d exists and is not a directory!\n"; } } # ... query status of all files that we have a directory for and parse output of 'cvs status' to %cvsstat. my @canstatusfiles; foreach my $f (@files) { my $path = dirname $f; next if (grep { $_ eq $path } @dirs); push @canstatusfiles, $f; } my %cvsstat; if (@canstatusfiles) { if ($opt_u) { my @updated = xargs_safe_pipe_capture([@cvs, 'update'], @canstatusfiles); print @updated; } # "cvs status" reorders the parameters, notably when there are multiple # arguments with the same basename. So be precise here. my %added = map { $_ => 1 } @afiles; my %todo = map { $_ => 1 } @canstatusfiles; while (%todo) { my @canstatusfiles2 = (); my %fullname = (); foreach my $name (keys %todo) { my $basename = basename($name); # CVS reports files that don't exist in the current revision as # "no file $basename" in its "status" output, so we should # anticipate that. Totally unknown files will have a status # "Unknown". However, if they exist in the Attic, their status # will be "Up-to-date" (this means they were added once but have # been removed). $basename = "no file $basename" if $added{$basename}; $basename =~ s/^\s+//; $basename =~ s/\s+$//; if (!exists($fullname{$basename})) { $fullname{$basename} = $name; push (@canstatusfiles2, $name); delete($todo{$name}); } } my @cvsoutput; @cvsoutput = xargs_safe_pipe_capture([@cvs, 'status'], @canstatusfiles2); foreach my $l (@cvsoutput) { chomp $l; next unless my ($file, $status) = $l =~ /^File:\s+(.*\S)\s+Status: (.*)$/; my $fullname = $fullname{$file}; print STDERR "Huh? Status '$status' reported for unexpected file '$file'\n" unless defined $fullname; # This response means the file does not exist except in # CVS's attic, so set the status accordingly $status = "In-attic" if $file =~ /^no file / && $status eq 'Up-to-date'; $cvsstat{$fullname{$file}} = $status if defined $fullname{$file}; } } } # ... Validate that new files have the correct status foreach my $f (@afiles) { next unless defined(my $stat = $cvsstat{$f}); # This means the file has never been seen before next if $stat eq 'Unknown'; # This means the file has been seen before but was removed next if $stat eq 'In-attic'; $dirty = 1; warn "File $f is already known in your CVS checkout -- perhaps it has been added by another user. Or this may indicate that it exists on a different branch. If this is the case, use -f to force the merge.\n"; warn "Status was: $cvsstat{$f}\n"; } # ... validate known files. foreach my $f (@files) { next if grep { $_ eq $f } @afiles; # TODO:we need to handle removed in cvs unless (defined ($cvsstat{$f}) and $cvsstat{$f} eq "Up-to-date") { $dirty = 1; warn "File $f not up to date but has status '$cvsstat{$f}' in your CVS checkout!\n"; } # Depending on how your GIT tree got imported from CVS you may # have a conflict between expanded keywords in your CVS tree and # unexpanded keywords in the patch about to be applied. if ($opt_k) { my $orig_file ="$f.orig"; rename $f, $orig_file; open(FILTER_IN, "<$orig_file") or die "Cannot open $orig_file\n"; open(FILTER_OUT, ">$f") or die "Cannot open $f\n"; while (<FILTER_IN>) { my $line = $_; $line =~ s/\$([A-Z][a-z]+):[^\$]+\$/\$$1\$/g; print FILTER_OUT $line; } close FILTER_IN; close FILTER_OUT; } } if ($dirty) { if ($opt_f) { warn "The tree is not clean -- forced merge\n"; $dirty = 0; } else { die "Exiting: your CVS tree is not clean for this merge."; } } print "Applying\n"; if ($opt_W) { system("git checkout -q $commit^0") && die "cannot patch"; } else { `GIT_DIR= git-apply $context --summary --numstat --apply <.cvsexportcommit.diff` || die "cannot patch"; } print "Patch applied successfully. Adding new files and directories to CVS\n"; my $dirtypatch = 0; # # We have to add the directories in order otherwise we will have # problems when we try and add the sub-directory of a directory we # have not added yet. # # Luckily this is easy to deal with by sorting the directories and # dealing with the shortest ones first. # @dirs = sort { length $a <=> length $b} @dirs; foreach my $d (@dirs) { if (system(@cvs,'add',$d)) { $dirtypatch = 1; warn "Failed to cvs add directory $d -- you may need to do it manually"; } } foreach my $f (@afiles) { if (grep { $_ eq $f } @bfiles) { system(@cvs, 'add','-kb',$f); } else { system(@cvs, 'add', $f); } if ($?) { $dirtypatch = 1; warn "Failed to cvs add $f -- you may need to do it manually"; } } foreach my $f (@dfiles) { system(@cvs, 'rm', '-f', $f); if ($?) { $dirtypatch = 1; warn "Failed to cvs rm -f $f -- you may need to do it manually"; } } print "Commit to CVS\n"; print "Patch title (first comment line): $title\n"; my @commitfiles = map { unless (m/\s/) { '\''.$_.'\''; } else { $_; }; } (@files); my $cmd = join(' ', @cvs)." commit -F .msg @commitfiles"; if ($dirtypatch) { print "NOTE: One or more hunks failed to apply cleanly.\n"; print "You'll need to apply the patch in .cvsexportcommit.diff manually\n"; print "using a patch program. After applying the patch and resolving the\n"; print "problems you may commit using:"; print "\n cd \"$opt_w\"" if $opt_w; print "\n $cmd\n"; print "\n git checkout $go_back_to\n" if $go_back_to; print "\n"; exit(1); } if ($opt_c) { print "Autocommit\n $cmd\n"; print xargs_safe_pipe_capture([@cvs, 'commit', '-F', '.msg'], @files); if ($?) { die "Exiting: The commit did not succeed"; } print "Committed successfully to CVS\n"; # clean up unlink(".msg"); } else { print "Ready for you to commit, just run:\n\n $cmd\n"; } # clean up unlink(".cvsexportcommit.diff"); if ($opt_W) { system("git checkout $go_back_to") && die "cannot move back to $go_back_to"; if (!($go_back_to =~ /^[0-9a-fA-F]{40}$/)) { system("git symbolic-ref HEAD $go_back_to") && die "cannot move back to $go_back_to"; } } # CVS version 1.11.x and 1.12.x sleeps the wrong way to ensure the timestamp # used by CVS and the one set by subsequence file modifications are different. # If they are not different CVS will not detect changes. sleep(1); sub usage { print STDERR <<END; Usage: GIT_DIR=/path/to/.git git cvsexportcommit [-h] [-p] [-v] [-c] [-f] [-u] [-k] [-w cvsworkdir] [-m msgprefix] [ parent ] commit END exit(1); } # An alternative to `command` that allows input to be passed as an array # to work around shell problems with weird characters in arguments # if the exec returns non-zero we die sub safe_pipe_capture { my @output; if (my $pid = open my $child, '-|') { @output = (<$child>); close $child or die join(' ',@_).": $! $?"; } else { exec(@_) or die "$! $?"; # exec() can fail the executable can't be found } return wantarray ? @output : join('',@output); } sub xargs_safe_pipe_capture { my $MAX_ARG_LENGTH = 65536; my $cmd = shift; my @output; my $output; while(@_) { my @args; my $length = 0; while(@_ && $length < $MAX_ARG_LENGTH) { push @args, shift; $length += length($args[$#args]); } if (wantarray) { push @output, safe_pipe_capture(@$cmd, @args); } else { $output .= safe_pipe_capture(@$cmd, @args); } } return wantarray ? @output : $output; }