git-send-email(1) ================= NAME ---- git-send-email - Send a collection of patches as emails SYNOPSIS -------- 'git send-email' [options] ... DESCRIPTION ----------- Takes the patches given on the command line and emails them out. Patches can be specified as files, directories (which will send all files in the directory), or directly as a revision list. In the last case, any format accepted by linkgit:git-format-patch[1] can be passed to git send-email. The header of the email is configurable by command line options. If not specified on the command line, the user will be prompted with a ReadLine enabled interface to provide the necessary information. There are two formats accepted for patch files: 1. mbox format files + This is what linkgit:git-format-patch[1] generates. Most headers and MIME formatting are ignored. 2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl' script + This format expects the first line of the file to contain the "Cc:" value and the "Subject:" of the message as the second line. OPTIONS ------- Composing ~~~~~~~~~ --annotate:: Review and edit each patch you're about to send. See the CONFIGURATION section for 'sendemail.multiedit'. --bcc=
:: Specify a "Bcc:" value for each email. Default is the value of 'sendemail.bcc'. + The --bcc option must be repeated for each user you want on the bcc list. --cc=
:: Specify a starting "Cc:" value for each email. Default is the value of 'sendemail.cc'. + The --cc option must be repeated for each user you want on the cc list. --compose:: Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an introductory message for the patch series. + When '--compose' is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message (what you type after the headers and a blank line) only contains blank (or GIT: prefixed) lines the summary won't be sent, but From, Subject, and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. + See the CONFIGURATION section for 'sendemail.multiedit'. --from=
:: Specify the sender of the emails. If not specified on the command line, the value of the 'sendemail.from' configuration option is used. If neither the command line option nor 'sendemail.from' are set, then the user will be prompted for the value. The default for the prompt will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not set, as returned by "git var -l". --in-reply-to=:: Specify the contents of the first In-Reply-To header. Subsequent emails will refer to the previous email instead of this if --chain-reply-to is set (the default) Only necessary if --compose is also set. If --compose is not set, this will be prompted for. --subject=:: Specify the initial subject of the email thread. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. --to=
:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the value of the 'sendemail.to' configuration value; if that is unspecified, this will be prompted for. + The --to option must be repeated for each user you want on the to list. Sending ~~~~~~~ --envelope-sender=
:: Specify the envelope sender used to send the emails. This is useful if your default address is not the address that is subscribed to a list. If you use the sendmail binary, you must have suitable privileges for the -f parameter. Default is the value of the 'sendemail.envelopesender' configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. --smtp-encryption=:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of 'sendemail.smtpencryption'. --smtp-pass[=]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as the password. Default is the value of 'sendemail.smtppass', however '--smtp-pass' always overrides this value. + Furthermore, passwords need not be specified in configuration files or on the command line. If a username has been specified (with '--smtp-user' or a 'sendemail.smtpuser'), but no password has been specified (with '--smtp-pass' or 'sendemail.smtppass'), then the user is prompted for a password while the input is masked for privacy. --smtp-server=:: If set, specifies the outgoing SMTP server to use (e.g. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; the program must support the `-i` option. Default value can be specified by the 'sendemail.smtpserver' configuration option; the built-in default is `/usr/sbin/sendmail` or `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. --smtp-server-port=:: Specifies a port different from the default port (SMTP servers typically listen to smtp port 25 and ssmtp port 465); symbolic port names (e.g. "submission" instead of 465) are also accepted. The port can also be set with the 'sendemail.smtpserverport' configuration variable. --smtp-ssl:: Legacy alias for '--smtp-encryption ssl'. --smtp-user=:: Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), then authentication is not attempted. Automating ~~~~~~~~~~ --cc-cmd=:: Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. Default is the value of 'sendemail.cccmd' configuration value. --[no-]chain-reply-to=:: If this is set, each email will be sent as a reply to the previous email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using this, it is recommended that the first file given be an overview of the entire patch series. Default is the value of the 'sendemail.chainreplyto' configuration value; if that is unspecified, default to --chain-reply-to. --identity=:: A configuration identity. When given, causes values in the 'sendemail.' subsection to take precedence over values in the 'sendemail' section. The default identity is the value of 'sendemail.identity'. --[no-]signed-off-by-cc:: If this is set, add emails found in Signed-off-by: or Cc: lines to the cc list. Default is the value of 'sendemail.signedoffbycc' configuration value; if that is unspecified, default to --signed-off-by-cc. --suppress-cc=:: Specify an additional category of recipients to suppress the auto-cc of: + -- - 'author' will avoid including the patch author - 'self' will avoid including the sender - 'cc' will avoid including anyone mentioned in Cc lines in the patch header except for self (use 'self' for that). - 'ccbody' will avoid including anyone mentioned in Cc lines in the patch body (commit message) except for self (use 'self' for that). - 'sob' will avoid including anyone mentioned in Signed-off-by lines except for self (use 'self' for that). - 'cccmd' will avoid running the --cc-cmd. - 'body' is equivalent to 'sob' + 'ccbody' - 'all' will suppress all auto cc values. -- + Default is the value of 'sendemail.suppresscc' configuration value; if that is unspecified, default to 'self' if --suppress-from is specified, as well as 'body' if --no-signed-off-cc is specified. --[no-]suppress-from:: If this is set, do not add the From: address to the cc: list. Default is the value of 'sendemail.suppressfrom' configuration value; if that is unspecified, default to --no-suppress-from. --[no-]thread:: If this is set, the In-Reply-To header will be set on each email sent. If disabled with "--no-thread", no emails will have the In-Reply-To header set. Default is the value of the 'sendemail.thread' configuration value; if that is unspecified, default to --thread. Administering ~~~~~~~~~~~~~ --confirm=:: Confirm just before sending: + -- - 'always' will always confirm before sending - 'never' will never confirm before sending - 'cc' will confirm before sending when send-email has automatically added addresses from the patch to the Cc list - 'compose' will confirm before sending the first message when using --compose. - 'auto' is equivalent to 'cc' + 'compose' -- + Default is the value of 'sendemail.confirm' configuration value; if that is unspecified, default to 'auto' unless any of the suppress options have been specified, in which case default to 'compose'. --dry-run:: Do everything except actually send the emails. --[no-]format-patch:: When an argument may be understood either as a reference or as a file name, choose to understand it as a format-patch argument ('--format-patch') or as a file name ('--no-format-patch'). By default, when such a conflict occurs, git send-email will fail. --quiet:: Make git-send-email less verbose. One line per email should be all that is output. --[no-]validate:: Perform sanity checks on patches. Currently, validation means the following: + -- * Warn of patches that contain lines longer than 998 characters; this is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. -- + Default is the value of 'sendemail.validate'; if this is not set, default to '--validate'. CONFIGURATION ------------- sendemail.aliasesfile:: To avoid typing long email addresses, point this to one or more email aliases files. You must also supply 'sendemail.aliasfiletype'. sendemail.aliasfiletype:: Format of the file(s) specified in sendemail.aliasesfile. Must be one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'. sendemail.multiedit:: If true (default), a single editor instance will be spawned to edit files you have to edit (patches when '--annotate' is used, and the summary when '--compose' is used). If false, files will be edited one after the other, spawning a new editor each time. sendemail.confirm:: Sets the default for whether to confirm before sending. Must be one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' in the previous section for the meaning of these values. Author ------ Written by Ryan Anderson git-send-email is originally based upon send_lots_of_email.pl by Greg Kroah-Hartman. Documentation -------------- Documentation by Ryan Anderson GIT --- Part of the linkgit:git[1] suite