git-rebase(1) ============= NAME ---- git-rebase - Reapply commits on top of another base tip SYNOPSIS -------- [verse] 'git rebase' [-i | --interactive] [] [--exec ] [--onto | --keep-base] [ []] 'git rebase' [-i | --interactive] [] [--exec ] [--onto ] --root [] 'git rebase' (--continue | --skip | --abort | --quit | --edit-todo | --show-current-patch) DESCRIPTION ----------- If is specified, 'git rebase' will perform an automatic `git switch ` before doing anything else. Otherwise it remains on the current branch. If is not specified, the upstream configured in branch..remote and branch..merge options will be used (see linkgit:git-config[1] for details) and the `--fork-point` option is assumed. If you are currently not on any branch or if the current branch does not have a configured upstream, the rebase will abort. All changes made by commits in the current branch but that are not in are saved to a temporary area. This is the same set of commits that would be shown by `git log ..HEAD`; or by `git log 'fork_point'..HEAD`, if `--fork-point` is active (see the description on `--fork-point` below); or by `git log HEAD`, if the `--root` option is specified. The current branch is reset to , or if the --onto option was supplied. This has the exact same effect as `git reset --hard ` (or ). ORIG_HEAD is set to point at the tip of the branch before the reset. The commits that were previously saved into the temporary area are then reapplied to the current branch, one by one, in order. Note that any commits in HEAD which introduce the same textual changes as a commit in HEAD.. are omitted (i.e., a patch already accepted upstream with a different commit message or timestamp will be skipped). It is possible that a merge failure will prevent this process from being completely automatic. You will have to resolve any such merge failure and run `git rebase --continue`. Another option is to bypass the commit that caused the merge failure with `git rebase --skip`. To check out the original and remove the .git/rebase-apply working files, use the command `git rebase --abort` instead. Assume the following history exists and the current branch is "topic": ------------ A---B---C topic / D---E---F---G master ------------ From this point, the result of either of the following commands: git rebase master git rebase master topic would be: ------------ A'--B'--C' topic / D---E---F---G master ------------ *NOTE:* The latter form is just a short-hand of `git checkout topic` followed by `git rebase master`. When rebase exits `topic` will remain the checked-out branch. If the upstream branch already contains a change you have made (e.g., because you mailed a patch which was applied upstream), then that commit will be skipped. For example, running `git rebase master` on the following history (in which `A'` and `A` introduce the same set of changes, but have different committer information): ------------ A---B---C topic / D---E---A'---F master ------------ will result in: ------------ B'---C' topic / D---E---A'---F master ------------ Here is how you would transplant a topic branch based on one branch to another, to pretend that you forked the topic branch from the latter branch, using `rebase --onto`. First let's assume your 'topic' is based on branch 'next'. For example, a feature developed in 'topic' depends on some functionality which is found in 'next'. ------------ o---o---o---o---o master \ o---o---o---o---o next \ o---o---o topic ------------ We want to make 'topic' forked from branch 'master'; for example, because the functionality on which 'topic' depends was merged into the more stable 'master' branch. We want our tree to look like this: ------------ o---o---o---o---o master | \ | o'--o'--o' topic \ o---o---o---o---o next ------------ We can get this using the following command: git rebase --onto master next topic Another example of --onto option is to rebase part of a branch. If we have the following situation: ------------ H---I---J topicB / E---F---G topicA / A---B---C---D master ------------ then the command git rebase --onto master topicA topicB would result in: ------------ H'--I'--J' topicB / | E---F---G topicA |/ A---B---C---D master ------------ This is useful when topicB does not depend on topicA. A range of commits could also be removed with rebase. If we have the following situation: ------------ E---F---G---H---I---J topicA ------------ then the command git rebase --onto topicA~5 topicA~3 topicA would result in the removal of commits F and G: ------------ E---H'---I'---J' topicA ------------ This is useful if F and G were flawed in some way, or should not be part of topicA. Note that the argument to --onto and the parameter can be any valid commit-ish. In case of conflict, 'git rebase' will stop at the first problematic commit and leave conflict markers in the tree. You can use 'git diff' to locate the markers (<<<<<<) and make edits to resolve the conflict. For each file you edit, you need to tell Git that the conflict has been resolved, typically this would be done with git add After resolving the conflict manually and updating the index with the desired resolution, you can continue the rebasing process with git rebase --continue Alternatively, you can undo the 'git rebase' with git rebase --abort CONFIGURATION ------------- include::config/rebase.txt[] OPTIONS ------- --onto :: Starting point at which to create the new commits. If the --onto option is not specified, the starting point is . May be any valid commit, and not just an existing branch name. + As a special case, you may use "A\...B" as a shortcut for the merge base of A and B if there is exactly one merge base. You can leave out at most one of A and B, in which case it defaults to HEAD. --keep-base:: Set the starting point at which to create the new commits to the merge base of . Running 'git rebase --keep-base ' is equivalent to running 'git rebase --onto ... '. + This option is useful in the case where one is developing a feature on top of an upstream branch. While the feature is being worked on, the upstream branch may advance and it may not be the best idea to keep rebasing on top of the upstream but to keep the base commit as-is. + Although both this option and --fork-point find the merge base between and , this option uses the merge base as the _starting point_ on which new commits will be created, whereas --fork-point uses the merge base to determine the _set of commits_ which will be rebased. + See also INCOMPATIBLE OPTIONS below. :: Upstream branch to compare against. May be any valid commit, not just an existing branch name. Defaults to the configured upstream for the current branch. :: Working branch; defaults to HEAD. --continue:: Restart the rebasing process after having resolved a merge conflict. --abort:: Abort the rebase operation and reset HEAD to the original branch. If was provided when the rebase operation was started, then HEAD will be reset to . Otherwise HEAD will be reset to where it was when the rebase operation was started. --quit:: Abort the rebase operation but HEAD is not reset back to the original branch. The index and working tree are also left unchanged as a result. --apply: Use applying strategies to rebase (calling `git-am` internally). This option may become a no-op in the future once the merge backend handles everything the apply one does. + See also INCOMPATIBLE OPTIONS below. --empty={drop,keep,ask}:: How to handle commits that are not empty to start and are not clean cherry-picks of any upstream commit, but which become empty after rebasing (because they contain a subset of already upstream changes). With drop (the default), commits that become empty are dropped. With keep, such commits are kept. With ask (implied by --interactive), the rebase will halt when an empty commit is applied allowing you to choose whether to drop it, edit files more, or just commit the empty changes. Other options, like --exec, will use the default of drop unless -i/--interactive is explicitly specified. + Note that commits which start empty are kept, and commits which are clean cherry-picks (as determined by `git log --cherry-mark ...`) are always dropped. + See also INCOMPATIBLE OPTIONS below. --keep-empty:: No-op. Rebasing commits that started empty (had no change relative to their parent) used to fail and this option would override that behavior, allowing commits with empty changes to be rebased. Now commits with no changes do not cause rebasing to halt. + See also BEHAVIORAL DIFFERENCES and INCOMPATIBLE OPTIONS below. --allow-empty-message:: No-op. Rebasing commits with an empty message used to fail and this option would override that behavior, allowing commits with empty messages to be rebased. Now commits with an empty message do not cause rebasing to halt. + See also INCOMPATIBLE OPTIONS below. --skip:: Restart the rebasing process by skipping the current patch. --edit-todo:: Edit the todo list during an interactive rebase. --show-current-patch:: Show the current patch in an interactive rebase or when rebase is stopped because of conflicts. This is the equivalent of `git show REBASE_HEAD`. -m:: --merge:: Use merging strategies to rebase. When the recursive (default) merge strategy is used, this allows rebase to be aware of renames on the upstream side. This is the default. + Note that a rebase merge works by replaying each commit from the working branch on top of the branch. Because of this, when a merge conflict happens, the side reported as 'ours' is the so-far rebased series, starting with , and 'theirs' is the working branch. In other words, the sides are swapped. + See also INCOMPATIBLE OPTIONS below. -s :: --strategy=:: Use the given merge strategy. If there is no `-s` option 'git merge-recursive' is used instead. This implies --merge. + Because 'git rebase' replays each commit from the working branch on top of the branch using the given strategy, using the 'ours' strategy simply empties all patches from the , which makes little sense. + See also INCOMPATIBLE OPTIONS below. -X :: --strategy-option=:: Pass the through to the merge strategy. This implies `--merge` and, if no strategy has been specified, `-s recursive`. Note the reversal of 'ours' and 'theirs' as noted above for the `-m` option. + See also INCOMPATIBLE OPTIONS below. --rerere-autoupdate:: --no-rerere-autoupdate:: Allow the rerere mechanism to update the index with the result of auto-conflict resolution if possible. -S[]:: --gpg-sign[=]:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be stuck to the option without a space. -q:: --quiet:: Be quiet. Implies --no-stat. -v:: --verbose:: Be verbose. Implies --stat. --stat:: Show a diffstat of what changed upstream since the last rebase. The diffstat is also controlled by the configuration option rebase.stat. -n:: --no-stat:: Do not show a diffstat as part of the rebase process. --no-verify:: This option bypasses the pre-rebase hook. See also linkgit:githooks[5]. --verify:: Allows the pre-rebase hook to run, which is the default. This option can be used to override --no-verify. See also linkgit:githooks[5]. -C:: Ensure at least lines of surrounding context match before and after each change. When fewer lines of surrounding context exist they all must match. By default no context is ever ignored. Implies --apply. + See also INCOMPATIBLE OPTIONS below. --no-ff:: --force-rebase:: -f:: Individually replay all rebased commits instead of fast-forwarding over the unchanged ones. This ensures that the entire history of the rebased branch is composed of new commits. + You may find this helpful after reverting a topic branch merge, as this option recreates the topic branch with fresh commits so it can be remerged successfully without needing to "revert the reversion" (see the link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for details). --fork-point:: --no-fork-point:: Use reflog to find a better common ancestor between and when calculating which commits have been introduced by . + When --fork-point is active, 'fork_point' will be used instead of to calculate the set of commits to rebase, where 'fork_point' is the result of `git merge-base --fork-point ` command (see linkgit:git-merge-base[1]). If 'fork_point' ends up being empty, the will be used as a fallback. + If is given on the command line, then the default is `--no-fork-point`, otherwise the default is `--fork-point`. + If your branch was based on but was rewound and your branch contains commits which were dropped, this option can be used with `--keep-base` in order to drop those commits from your branch. + See also INCOMPATIBLE OPTIONS below. --ignore-whitespace:: --whitespace=