Git 2.11 Release Notes ====================== Updates since v2.10 ------------------- UI, Workflows & Features * "git format-patch --cover-letter HEAD^" to format a single patch with a separate cover letter now numbers the output as [PATCH 0/1] and [PATCH 1/1] by default. * An incoming "git push" that attempts to push too many bytes can now be rejected by setting a new configuration variable at the receiving end. * "git nosuchcommand --help" said "No manual entry for gitnosuchcommand", which was not intuitive, given that "git nosuchcommand" said "git: 'nosuchcommand' is not a git command". * "git clone --resurse-submodules --reference $path $URL" is a way to reduce network transfer cost by borrowing objects in an existing $path repository when cloning the superproject from $URL; it learned to also peek into $path for presense of corresponding repositories of submodules and borrow objects from there when able. * The "git diff --submodule={short,log}" mechanism has been enhanced to allow "--submodule=diff" to show the patch between the submodule commits bound to the superproject. * Even though "git hash-objects", which is a tool to take an on-filesystem data stream and put it into the Git object store, allowed to perform the "outside-world-to-Git" conversions (e.g. end-of-line conversions and application of the clean-filter), and it had the feature on by default from very early days, its reverse operation "git cat-file", which takes an object from the Git object store and externalize for the consumption by the outside world, lacked an equivalent mechanism to run the "Git-to-outside-world" conversion. The command learned the "--filters" option to do so. * Output from "git diff" can be made easier to read by selecting which lines are common and which lines are added/deleted intelligently when the lines before and after the changed section are the same. A command line option is added to help with the experiment to find a good heuristics. * In some projects, it is common to use "[RFC PATCH]" as the subject prefix for a patch meant for discussion rather than application. A new option "--rfc" was a short-hand for "--subject-prefix=RFC PATCH" to help the participants of such projects. * "git add --chmod=+x " added recently only toggled the executable bit for paths that are either new or modified. This has been corrected to flip the executable bit for all paths that match the given pathspec. * When "git format-patch --stdout" output is placed as an in-body header and it uses the RFC2822 header folding, "git am" failed to put the header line back into a single logical line. The underlying "git mailinfo" was taught to handle this properly. * "gitweb" can spawn "highlight" to show blob contents with (programming) language-specific syntax highlighting, but only when the language is known. "highlight" can however be told to make the guess itself by giving it "--force" option, which has been enabled. * "git gui" l10n to Portuguese. * When given an abbreviated object name that is not (or more realistically, "no longer") unique, we gave a fatal error "ambiguous argument". This error is now accompanied by hints that lists the objects that begins with the given prefix. During the course of development of this new feature, numerous minor bugs were uncovered and corrected, the most notable one of which is that we gave "short SHA1 xxxx is ambiguous." twice without good reason. * "git log rev^..rev" is an often-used revision range specification to show what was done on a side branch merged at rev. This has gained a short-hand "rev^-1". In general "rev^-$n" is the same as "^rev^$n rev", i.e. what has happened on other branches while the history leading to nth parent was looking the other way. * In recent versions of cURL, GSSAPI credential delegation is disabled by default due to CVE-2011-2192; introduce a configuration to selectively allow enabling this. (merge 26a7b23429 ps/http-gssapi-cred-delegation later to maint). Performance, Internal Implementation, Development Support etc. * The delta-base-cache mechanism has been a key to the performance in a repository with a tightly packed packfile, but it did not scale well even with a larger value of core.deltaBaseCacheLimit. * Enhance "git status --porcelain" output by collecting more data on the state of the index and the working tree files, which may further be used to teach git-prompt (in contrib/) to make fewer calls to git. * Extract a small helper out of the function that reads the authors script file "git am" internally uses. (merge a77598e jc/am-read-author-file later to maint). * Lifts calls to exit(2) and die() higher in the callchain in sequencer.c files so that more helper functions in it can be used by callers that want to handle error conditions themselves. * "git am" has been taught to make an internal call to "git apply"'s innards without spawning the latter as a separate process. * The ref-store abstraction was introduced to the refs API so that we can plug in different backends to store references. * The "unsigned char sha1[20]" to "struct object_id" conversion continues. Notable changes in this round includes that ce->sha1, i.e. the object name recorded in the cache_entry, turns into an object_id. * JGit can show a fake ref "capabilities^{}" to "git fetch" when it does not advertise any refs, but "git fetch" was not prepared to see such an advertisement. When the other side disconnects without giving any ref advertisement, we used to say "there may not be a repository at that URL", but we may have seen other advertisement like "shallow" and ".have" in which case we definitely know that a repository is there. The code to detect this case has also been updated. * Some codepaths in "git pack-objects" were not ready to use an existing pack bitmap; now they are and as the result they have become faster. * The codepath in "git fsck" to detect malformed tree objects has been updated not to die but keep going after detecting them. * We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of the time third parameter is redundant. A new QSORT() macro lets us omit it. * "git pack-objects" in a repository with many packfiles used to spend a lot of time looking for/at objects in them; the accesses to the packfiles are now optimized by checking the most-recently-used packfile first. (merge c9af708b1a jk/pack-objects-optim-mru later to maint). Also contains various documentation updates and code clean-ups. Fixes since v2.10 ----------------- Unless otherwise noted, all the fixes since v2.9 in the maintenance track are contained in this release (see the maintenance releases' notes for details). * Clarify various ways to specify the "revision ranges" in the documentation. * "diff-highlight" script (in contrib/) learned to work better with "git log -p --graph" output. * The test framework left the number of tests and success/failure count in the t/test-results directory, keyed by the name of the test script plus the process ID. The latter however turned out not to serve any useful purpose. The process ID part of the filename has been removed. * Having a submodule whose ".git" repository is somehow corrupt caused a few commands that recurse into submodules loop forever. * "git symbolic-ref -d HEAD" happily removes the symbolic ref, but the resulting repository becomes an invalid one. Teach the command to forbid removal of HEAD. * A test spawned a short-lived background process, which sometimes prevented the test directory from getting removed at the end of the script on some platforms. * Update a few tests that used to use GIT_CURL_VERBOSE to use the newer GIT_TRACE_CURL. * "git pack-objects --include-tag" was taught that when we know that we are sending an object C, we want a tag B that directly points at C but also a tag A that points at the tag B. We used to miss the intermediate tag B in some cases. * Update Japanese translation for "git-gui". * "git fetch http::/site/path" did not die correctly and segfaulted instead. * "git commit-tree" stopped reading commit.gpgsign configuration variable that was meant for Porcelain "git commit" in Git 2.9; we forgot to update "git gui" to look at the configuration to match this change. * "git add --chmod=+x" added recently lacked documentation, which has been corrected. * "git log --cherry-pick" used to include merge commits as candidates to be matched up with other commits, resulting a lot of wasted time. The patch-id generation logic has been updated to ignore merges to avoid the wastage. * The http transport (with curl-multi option, which is the default these days) failed to remove curl-easy handle from a curlm session, which led to unnecessary API failures. * There were numerous corner cases in which the configuration files are read and used or not read at all depending on the directory a Git command was run, leading to inconsistent behaviour. The code to set-up repository access at the beginning of a Git process has been updated to fix them. (merge 4d0efa1 jk/setup-sequence-update later to maint). * "git diff -W" output needs to extend the context backward to include the header line of the current function and also forward to include the body of the entire current function up to the header line of the next one. This process may have to merge to adjacent hunks, but the code forgot to do so in some cases. (merge 45d2f75 rs/xdiff-merge-overlapping-hunks-for-W-context later to maint). * Performance tests done via "t/perf" did not use the same set of build configuration if the user relied on autoconf generated configuration. * "git format-patch --base=..." feature that was recently added showed the base commit information after "-- " e-mail signature line, which turned out to be inconvenient. The base information has been moved above the signature line. * More i18n. (merge 43073f8 va/i18n later to maint). * Even when "git pull --rebase=preserve" (and the underlying "git rebase --preserve") can complete without creating any new commit (i.e. fast-forwards), it still insisted on having a usable ident information (read: user.email is set correctly), which was less than nice. As the underlying commands used inside "git rebase" would fail with a more meaningful error message and advice text when the bogus ident matters, this extra check was removed. * "git gc --aggressive" used to limit the delta-chain length to 250, which is way too deep for gaining additional space savings and is detrimental for runtime performance. The limit has been reduced to 50. * Documentation for individual configuration variables to control use of color (like `color.grep`) said that their default value is 'false', instead of saying their default is taken from `color.ui`. When we updated the default value for color.ui from 'false' to 'auto' quite a while ago, all of them broke. This has been corrected. * The pretty-format specifier "%C(auto)" used by the "log" family of commands to enable coloring of the output is taught to also issue a color-reset sequence to the output. (merge c99ad27 rs/c-auto-resets-attributes later to maint). * A shell script example in check-ref-format documentation has been fixed. * "git checkout " does not follow the usual disambiguation rules when the can be both a rev and a path, to allow checking out a branch 'foo' in a project that happens to have a file 'foo' in the working tree without having to disambiguate. This was poorly documented and the check was incorrect when the command was run from a subdirectory. * Some codepaths in "git diff" used regexec(3) on a buffer that was mmap(2)ed, which may not have a terminating NUL, leading to a read beyond the end of the mapped region. This was fixed by introducing a regexec_buf() helper that takes a pair with REG_STARTEND extension. (merge b7d36ff js/regexec-buf later to maint). * The procedure to build Git on Mac OS X for Travis CI hardcoded the internal directory structure we assumed HomeBrew uses, which was a no-no. The procedure has been updated to ask HomeBrew things we need to know to fix this. * When "git rebase -i" is given a broken instruction, it told the user to fix it with "--edit-todo", but didn't say what the step after that was (i.e. "--continue"). * Documentation around tools to import from CVS was fairly outdated. * "git clone --recurse-submodules" lost the progress eye-candy in recent update, which has been corrected. * A low-level function verify_packfile() was meant to show errors that were detected without dying itself, but under some conditions it didn't and died instead, which has been fixed. (merge a9445d859e jk/verify-packfile-gently later to maint). * When "git fetch" tries to find where the history of the repository it runs in has diverged from what the other side has, it has a mechanism to avoid digging too deep into irrelevant side branches. This however did not work well over the "smart-http" transport due to a design bug, which has been fixed. (merge 06b3d386e0 jt/fetch-pack-in-vain-count-with-stateless later to maint). * In the codepath that comes up with the hostname to be used in an e-mail when the user didn't tell us, we looked at ai_canonname field in struct addrinfo without making sure it is not NULL first. * "git worktree", even though it used the default_abbrev setting that ought to be affected by core.abbrev configuration variable, ignored the variable setting. The command has been taught to read the default set of configuration variables to correct this. (merge d49028e6e7 jc/worktree-config later to maint). * "git init" tried to record core.worktree in the repository's 'config' file when GIT_WORK_TREE environment variable was set and it was different from where GIT_DIR appears as ".git" at its top, but the logic was faulty when .git is a "gitdir:" file that points at the real place, causing trouble in working trees that are managed by "git worktree". This has been corrected. * Codepaths that read from an on-disk loose object were too loose in validating what they are reading is a proper object file and sometimes read past the data they read from the disk, which has been corrected. H/t to Gustavo Grieco for reporting. (merge d21f842690 jc/verify-loose-object-header later to maint). * The original command line syntax for "git merge", which was "git merge HEAD ...", has been deprecated for quite some time, and "git gui" was the last in-tree user of the syntax. This is finally fixed, so that we can move forward with the deprecation. (merge ff65e796f0 rs/git-gui-use-modern-git-merge-syntax later to maint). * An author name, that spelled a backslash-quoted double quote in the human readable part "My \"double quoted\" name", was not unquoted correctly while applying a patch from a piece of e-mail. (merge f357e5de31 kd/mailinfo-quoted-string later to maint). * Doc update to clarify what "log -3 --reverse" does. (merge 04be69478f pb/rev-list-reverse-with-count later to maint). * Almost everybody uses DEFAULT_ABBREV to refer to the default setting for the abbreviation, but "git blame" peeked into underlying variable bypassing the macro for no good reason. (merge 5293284b4d jc/blame-abbrev later to maint). * The "graph" API used in "git log --graph" miscounted the number of output columns consumed so far when drawing a padding line, which has been fixed; this did not affect any existing code as nobody tried to write anything after the padding on such a line, though. (merge 1647793524 jk/graph-padding-fix later to maint). * The code that parses the format parameter of for-each-ref command has seen a micro-optimization. (merge e94ce1394e sg/ref-filter-parse-optim later to maint). * When we started cURL to talk to imap server when a new enough version of cURL library is available, we forgot to explicitly add imap(s):// before the destination. To some folks, that didn't work and the library tried to make HTTP(s) requests instead. (merge d2d07ab861 ak/curl-imap-send-explicit-scheme later to maint). * The ./configure script generated from configure.ac was taught how to detect support of SSL by libcurl better. (merge 924b7eb1c9 dp/autoconf-curl-ssl later to maint). * The command-line completion script (in contrib/) learned to complete "git cmd ^mas" to complete the negative end of reference to "git cmd ^master". (merge 49416ad22a cp/completion-negative-refs later to maint). * The existing "git fetch --depth=" option was hard to use correctly when making the history of an existing shallow clone deeper. A new option, "--deepen=", has been added to make this easier to use. "git clone" also learned "--shallow-since=" and "--shallow-exclude=" options to make it easier to specify "I am interested only in the recent N months worth of history" and "Give me only the history since that version". (merge cccf74e2da nd/shallow-deepen later to maint). * It is a common mistake to say "git blame --reverse OLD path", expecting that the command line is dwimmed as if asking how lines in path in an old revision OLD have survived up to the current commit. (merge e1d09701a4 jc/blame-reverse later to maint). * Other minor doc, test and build updates and code cleanups. (merge a22ae75 rs/cocci later to maint). (merge 45ccef87b3 rs/copy-array later to maint). (merge 8201688ecd dt/mailinfo later to maint).