From ddc12c429b63912032cbabfaac689093de43c2b9 Mon Sep 17 00:00:00 2001 From: Jiang Xin Date: Mon, 30 Dec 2019 08:56:49 +0800 Subject: l10n: zh_CN: for git v2.25.0 l10n round 1 Translate 119 new messages (4800t0f0u) for git 2.25.0. Signed-off-by: Jiang Xin --- po/zh_CN.po | 5094 +++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 2813 insertions(+), 2281 deletions(-) (limited to 'po') diff --git a/po/zh_CN.po b/po/zh_CN.po index ba03b1088f..73da662fef 100644 --- a/po/zh_CN.po +++ b/po/zh_CN.po @@ -139,8 +139,8 @@ msgid "" msgstr "" "Project-Id-Version: Git\n" "Report-Msgid-Bugs-To: Git Mailing List \n" -"POT-Creation-Date: 2019-10-28 13:19+0800\n" -"PO-Revision-Date: 2019-10-30 14:58+0800\n" +"POT-Creation-Date: 2019-12-30 08:48+0800\n" +"PO-Revision-Date: 2020-01-12 17:16+0800\n" "Last-Translator: Jiang Xin \n" "Language-Team: GitHub \n" "Language: zh_CN\n" @@ -149,37 +149,458 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -#: advice.c:109 +#: add-interactive.c:347 +#, c-format +msgid "Huh (%s)?" +msgstr "嗯（%s）？" + +#: add-interactive.c:500 add-interactive.c:801 sequencer.c:3216 +#: sequencer.c:3656 builtin/rebase.c:871 builtin/rebase.c:1643 +#: builtin/rebase.c:2019 builtin/rebase.c:2063 +msgid "could not read index" +msgstr "不能读取索引" + +#: add-interactive.c:555 git-add--interactive.perl:269 +#: git-add--interactive.perl:294 +msgid "binary" +msgstr "二进制" + +#: add-interactive.c:613 git-add--interactive.perl:278 +#: git-add--interactive.perl:332 +msgid "nothing" +msgstr "无" + +#: add-interactive.c:614 git-add--interactive.perl:314 +#: git-add--interactive.perl:329 +msgid "unchanged" +msgstr "没有修改" + +#: add-interactive.c:651 git-add--interactive.perl:643 +msgid "Update" +msgstr "更新" + +#: add-interactive.c:668 add-interactive.c:856 +#, c-format +msgid "could not stage '%s'" +msgstr "不能暂存 '%s'" + +#: add-interactive.c:674 add-interactive.c:863 sequencer.c:3409 +#: builtin/rebase.c:895 +msgid "could not write index" +msgstr "不能写入索引" + +#: add-interactive.c:677 git-add--interactive.perl:628 +#, c-format, perl-format +msgid "updated %d path\n" +msgid_plural "updated %d paths\n" +msgstr[0] "更新了 %d 个路径\n" +msgstr[1] "更新了 %d 个路径\n" + +#: add-interactive.c:695 git-add--interactive.perl:678 +#, c-format, perl-format +msgid "note: %s is untracked now.\n" +msgstr "说明：%s 现已成为未跟踪的。\n" + +#: add-interactive.c:700 apply.c:4108 builtin/checkout.c:281 +#: builtin/reset.c:144 +#, c-format +msgid "make_cache_entry failed for path '%s'" +msgstr "对路径 '%s' 的 make_cache_entry 操作失败" + +#: add-interactive.c:730 git-add--interactive.perl:655 +msgid "Revert" +msgstr "还原" + +#: add-interactive.c:746 +msgid "Could not parse HEAD^{tree}" +msgstr "不能解析 HEAD^{tree}" + +#: add-interactive.c:784 git-add--interactive.perl:631 +#, c-format, perl-format +msgid "reverted %d path\n" +msgid_plural "reverted %d paths\n" +msgstr[0] "还原了 %d 个路径\n" +msgstr[1] "还原了 %d 个路径\n" + +#: add-interactive.c:835 git-add--interactive.perl:695 +#, c-format +msgid "No untracked files.\n" +msgstr "没有未跟踪的文件。\n" + +#: add-interactive.c:839 git-add--interactive.perl:689 +msgid "Add untracked" +msgstr "添加未跟踪的" + +#: add-interactive.c:866 git-add--interactive.perl:625 +#, c-format, perl-format +msgid "added %d path\n" +msgid_plural "added %d paths\n" +msgstr[0] "增加了 %d 个路径\n" +msgstr[1] "增加了 %d 个路径\n" + +#: add-interactive.c:896 +#, c-format +msgid "ignoring unmerged: %s" +msgstr "忽略未合入的：%s" + +#: add-interactive.c:908 add-patch.c:1331 git-add--interactive.perl:1366 +#, c-format +msgid "Only binary files changed.\n" +msgstr "只有二进制文件被修改。\n" + +#: add-interactive.c:910 add-patch.c:1329 git-add--interactive.perl:1368 +#, c-format +msgid "No changes.\n" +msgstr "没有修改。\n" + +#: add-interactive.c:914 git-add--interactive.perl:1376 +msgid "Patch update" +msgstr "补丁更新" + +#: add-interactive.c:953 git-add--interactive.perl:1754 +msgid "Review diff" +msgstr "检视 diff" + +#: add-interactive.c:981 +msgid "show paths with changes" +msgstr "显示含变更的路径" + +#: add-interactive.c:983 +msgid "add working tree state to the staged set of changes" +msgstr "将工作区状态添加到暂存区修改集中" + +#: add-interactive.c:985 +msgid "revert staged set of changes back to the HEAD version" +msgstr "将暂存的修改集恢复为 HEAD 版本" + +#: add-interactive.c:987 +msgid "pick hunks and update selectively" +msgstr "挑选数据块并有选择地更新" + +#: add-interactive.c:989 +msgid "view diff between HEAD and index" +msgstr "显示 HEAD 和索引的差异" + +#: add-interactive.c:991 +msgid "add contents of untracked files to the staged set of changes" +msgstr "将未跟踪文件的内容添加到暂存区修改集中" + +#: add-interactive.c:999 add-interactive.c:1048 +msgid "Prompt help:" +msgstr "帮助：" + +#: add-interactive.c:1001 +msgid "select a single item" +msgstr "选择一个条目" + +#: add-interactive.c:1003 +msgid "select a range of items" +msgstr "选择一系列条目" + +#: add-interactive.c:1005 +msgid "select multiple ranges" +msgstr "选择多个范围" + +#: add-interactive.c:1007 add-interactive.c:1052 +msgid "select item based on unique prefix" +msgstr "基于唯一前缀选择条目" + +#: add-interactive.c:1009 +msgid "unselect specified items" +msgstr "反选指定的条目" + +#: add-interactive.c:1011 +msgid "choose all items" +msgstr "选择所有条目" + +#: add-interactive.c:1013 +msgid "(empty) finish selecting" +msgstr "（空）结束选择" + +#: add-interactive.c:1050 +msgid "select a numbered item" +msgstr "选择一个编号条目" + +#: add-interactive.c:1054 +msgid "(empty) select nothing" +msgstr "（空）不选择任何内容" + +#: add-interactive.c:1062 builtin/clean.c:822 git-add--interactive.perl:1851 +msgid "*** Commands ***" +msgstr "*** 命令 ***" + +#: add-interactive.c:1063 builtin/clean.c:823 git-add--interactive.perl:1848 +msgid "What now" +msgstr "请选择" + +#: add-interactive.c:1115 git-add--interactive.perl:213 +msgid "staged" +msgstr "缓存" + +#: add-interactive.c:1115 git-add--interactive.perl:213 +msgid "unstaged" +msgstr "未缓存" + +#: add-interactive.c:1115 apply.c:4965 apply.c:4968 builtin/am.c:2197 +#: builtin/am.c:2200 builtin/clone.c:123 builtin/fetch.c:144 +#: builtin/merge.c:273 builtin/pull.c:209 builtin/submodule--helper.c:409 +#: builtin/submodule--helper.c:1379 builtin/submodule--helper.c:1382 +#: builtin/submodule--helper.c:1875 builtin/submodule--helper.c:1878 +#: builtin/submodule--helper.c:2119 git-add--interactive.perl:213 +msgid "path" +msgstr "路径" + +#: add-interactive.c:1122 +msgid "could not refresh index" +msgstr "不能刷新索引" + +#: add-interactive.c:1136 builtin/clean.c:787 git-add--interactive.perl:1765 +#, c-format +msgid "Bye.\n" +msgstr "再见。\n" + +#: add-patch.c:15 +#, c-format +msgid "Stage mode change [y,n,a,q,d%s,?]? " +msgstr "暂存模式变更 [y,n,a,q,d%s,?]? " + +#: add-patch.c:16 +#, c-format +msgid "Stage deletion [y,n,a,q,d%s,?]? " +msgstr "暂存删除动作 [y,n,a,q,d%s,?]? " + +#: add-patch.c:17 +#, c-format +msgid "Stage this hunk [y,n,a,q,d%s,?]? " +msgstr "暂存该块 [y,n,a,q,d%s,?]? " + +#: add-patch.c:111 +#, c-format +msgid "could not parse hunk header '%.*s'" +msgstr "无法解析数据块头信息 '%.*s'" + +#: add-patch.c:130 add-patch.c:134 +#, c-format +msgid "could not parse colored hunk header '%.*s'" +msgstr "无法解析彩色数据块头信息 '%.*s'" + +#: add-patch.c:176 +msgid "could not parse diff" +msgstr "不能解析差异信息" + +#: add-patch.c:194 +msgid "could not parse colored diff" +msgstr "不能解析彩色差异信息" + +#: add-patch.c:508 +#, c-format +msgid "" +"expected context line #%d in\n" +"%.*s" +msgstr "" +"预期上下文行 #%d 于\n" +"%.*s" + +#: add-patch.c:523 +#, c-format +msgid "" +"hunks do not overlap:\n" +"%.*s\n" +"\tdoes not end with:\n" +"%.*s" +msgstr "" +"块不重叠：\n" +"%.*s\n" +"\t不是结尾于：\n" +"%.*s" + +#: add-patch.c:799 git-add--interactive.perl:1112 +msgid "Manual hunk edit mode -- see bottom for a quick guide.\n" +msgstr "手动块编辑模式 -- 查看底部的快速指南。\n" + +#: add-patch.c:803 +#, c-format +msgid "" +"---\n" +"To remove '%c' lines, make them ' ' lines (context).\n" +"To remove '%c' lines, delete them.\n" +"Lines starting with %c will be removed.\n" +msgstr "" +"---\n" +"要删除 '%c' 开始的行，使其成为 ' ' 开始的行（上下文）。\n" +"要删除 '%c' 开始的行，删除它们。\n" +"以 %c 开始的行将被删除。\n" + +#: add-patch.c:810 +msgid "" +"If the patch applies cleanly, the edited hunk will immediately be\n" +"marked for staging.\n" +msgstr "如果补丁能干净地应用，编辑块将立即标记为暂存。\n" + +#. TRANSLATORS: 'it' refers to the patch mentioned in the previous messages. +#: add-patch.c:818 git-add--interactive.perl:1126 +msgid "" +"If it does not apply cleanly, you will be given an opportunity to\n" +"edit again. If all lines of the hunk are removed, then the edit is\n" +"aborted and the hunk is left unchanged.\n" +msgstr "" +"如果不能干净地应用，您将有机会重新编辑。如果该块的全部内容删除，则\n" +"此次编辑被终止，该块不会被修改。\n" + +#: add-patch.c:851 +msgid "could not parse hunk header" +msgstr "无法解析数据块头信息" + +#: add-patch.c:895 add-patch.c:1294 +msgid "'git apply --cached' failed" +msgstr "'git apply --cached' 失败" + +#. TRANSLATORS: do not translate [y/n] +#. The program will only accept that input at this point. +#. Consider translating (saying "no" discards!) as +#. (saying "n" for "no" discards!) if the translation +#. of the word "no" does not start with n. +#. +#. TRANSLATORS: do not translate [y/n] +#. The program will only accept that input +#. at this point. +#. Consider translating (saying "no" discards!) as +#. (saying "n" for "no" discards!) if the translation +#. of the word "no" does not start with n. +#: add-patch.c:952 git-add--interactive.perl:1239 +msgid "" +"Your edited hunk does not apply. Edit again (saying \"no\" discards!) [y/n]? " +msgstr "您的编辑块不能被应用。重新编辑（选择 \"no\" 丢弃！） [y/n]? " + +#: add-patch.c:1009 +msgid "" +"y - stage this hunk\n" +"n - do not stage this hunk\n" +"q - quit; do not stage this hunk or any of the remaining ones\n" +"a - stage this and all the remaining hunks\n" +"d - do not stage this hunk nor any of the remaining hunks\n" +msgstr "" +"y - 暂存该块\n" +"n - 不要暂存该块\n" +"q - 退出。不暂存该块及后面的全部块\n" +"a - 暂存该块和所有剩余的块\n" +"d - 不暂存该块和任何剩余的块\n" + +#: add-patch.c:1016 +msgid "" +"j - leave this hunk undecided, see next undecided hunk\n" +"J - leave this hunk undecided, see next hunk\n" +"k - leave this hunk undecided, see previous undecided hunk\n" +"K - leave this hunk undecided, see previous hunk\n" +"g - select a hunk to go to\n" +"/ - search for a hunk matching the given regex\n" +"s - split the current hunk into smaller hunks\n" +"e - manually edit the current hunk\n" +"? - print help\n" +msgstr "" +"j - 维持该块未决状态，查看下一个未决块\n" +"J - 维持该块未决状态，查看下一个块\n" +"k - 维持该块未决状态，查看上一个未决块\n" +"K - 维持该块未决状态，查看上一个块\n" +"g - 选择跳转到一个块\n" +"/ - 查找和给定正则表达式匹配的块\n" +"s - 拆分当前块为更小的块\n" +"e - 手动编辑当前块\n" +"? - 显示帮助\n" + +#: add-patch.c:1137 add-patch.c:1147 +msgid "No previous hunk" +msgstr "没有前一个块" + +#: add-patch.c:1142 add-patch.c:1152 +msgid "No next hunk" +msgstr "没有下一个块" + +#: add-patch.c:1158 +msgid "No other hunks to goto" +msgstr "没有其它可供跳转的块" + +#: add-patch.c:1169 git-add--interactive.perl:1577 +msgid "go to which hunk ( to see more)? " +msgstr "跳转到哪个块（<回车> 查看更多）？ " + +#: add-patch.c:1170 git-add--interactive.perl:1579 +msgid "go to which hunk? " +msgstr "跳转到哪个块？" + +#: add-patch.c:1181 +#, c-format +msgid "Invalid number: '%s'" +msgstr "无效数字：'%s'" + +#: add-patch.c:1186 +#, c-format +msgid "Sorry, only %d hunk available." +msgid_plural "Sorry, only %d hunks available." +msgstr[0] "对不起，只有 %d 个可用块。" +msgstr[1] "对不起，只有 %d 个可用块。" + +#: add-patch.c:1195 +msgid "No other hunks to search" +msgstr "没有其它可供查找的块" + +#: add-patch.c:1201 git-add--interactive.perl:1623 +msgid "search for regex? " +msgstr "使用正则表达式搜索？" + +#: add-patch.c:1216 +#, c-format +msgid "Malformed search regexp %s: %s" +msgstr "错误的正则表达式 %s：%s" + +#: add-patch.c:1233 +msgid "No hunk matches the given pattern" +msgstr "没有和给定模式相匹配的块" + +#: add-patch.c:1240 +msgid "Sorry, cannot split this hunk" +msgstr "对不起，不能拆分这个块" + +#: add-patch.c:1244 +#, c-format +msgid "Split into %d hunks." +msgstr "拆分为 %d 块。" + +#: add-patch.c:1248 +msgid "Sorry, cannot edit this hunk" +msgstr "对不起，不能编辑这个块" + +#: advice.c:111 #, c-format msgid "%shint: %.*s%s\n" msgstr "%s提示：%.*s%s\n" -#: advice.c:162 +#: advice.c:164 msgid "Cherry-picking is not possible because you have unmerged files." msgstr "无法拣选，因为您有未合并的文件。" -#: advice.c:164 +#: advice.c:166 msgid "Committing is not possible because you have unmerged files." msgstr "无法提交，因为您有未合并的文件。" -#: advice.c:166 +#: advice.c:168 msgid "Merging is not possible because you have unmerged files." msgstr "无法合并，因为您有未合并的文件。" -#: advice.c:168 +#: advice.c:170 msgid "Pulling is not possible because you have unmerged files." msgstr "无法拉取，因为您有未合并的文件。" -#: advice.c:170 +#: advice.c:172 msgid "Reverting is not possible because you have unmerged files." msgstr "无法回退，因为您有未合并的文件。" -#: advice.c:172 +#: advice.c:174 #, c-format msgid "It is not possible to %s because you have unmerged files." msgstr "无法 %s，因为您有未合并的文件。" -#: advice.c:180 +#: advice.c:182 msgid "" "Fix them up in the work tree, and then use 'git add/rm '\n" "as appropriate to mark resolution and make a commit." @@ -187,23 +608,23 @@ msgstr "" "请在工作区改正文件，然后酌情使用 'git add/rm <文件>' 命令标记\n" "解决方案并提交。" -#: advice.c:188 +#: advice.c:190 msgid "Exiting because of an unresolved conflict." msgstr "因为存在未解决的冲突而退出。" -#: advice.c:193 builtin/merge.c:1332 +#: advice.c:195 builtin/merge.c:1332 msgid "You have not concluded your merge (MERGE_HEAD exists)." msgstr "您尚未结束您的合并（存在 MERGE_HEAD）。" -#: advice.c:195 +#: advice.c:197 msgid "Please, commit your changes before merging." msgstr "请在合并前先提交您的修改。" -#: advice.c:196 +#: advice.c:198 msgid "Exiting because of unfinished merge." msgstr "因为存在未完成的合并而退出。" -#: advice.c:202 +#: advice.c:204 #, c-format msgid "" "Note: switching to '%s'.\n" @@ -404,24 +825,24 @@ msgstr "无法读取符号链接 %s" msgid "unable to open or read %s" msgstr "不能打开或读取 %s" -#: apply.c:2926 +#: apply.c:2936 #, c-format msgid "invalid start of line: '%c'" msgstr "无效的行首字符：'%c'" -#: apply.c:3047 +#: apply.c:3057 #, c-format msgid "Hunk #%d succeeded at %d (offset %d line)." msgid_plural "Hunk #%d succeeded at %d (offset %d lines)." msgstr[0] "块 #%d 成功应用于 %d（偏移 %d 行）" msgstr[1] "块 #%d 成功应用于 %d（偏移 %d 行）" -#: apply.c:3059 +#: apply.c:3069 #, c-format msgid "Context reduced to (%ld/%ld) to apply fragment at %d" msgstr "上下文减少到（%ld/%ld）以在第 %d 行应用补丁片段" -#: apply.c:3065 +#: apply.c:3075 #, c-format msgid "" "while searching for:\n" @@ -430,451 +851,437 @@ msgstr "" "当查询：\n" "%.*s" -#: apply.c:3087 +#: apply.c:3097 #, c-format msgid "missing binary patch data for '%s'" msgstr "缺失 '%s' 的二进制补丁数据" -#: apply.c:3095 +#: apply.c:3105 #, c-format msgid "cannot reverse-apply a binary patch without the reverse hunk to '%s'" msgstr "不能反向应用一个缺少到 '%s' 的反向数据块的二进制补丁" -#: apply.c:3142 +#: apply.c:3152 #, c-format msgid "cannot apply binary patch to '%s' without full index line" msgstr "不能在 '%s' 上应用没有完整索引行的二进制补丁" -#: apply.c:3152 +#: apply.c:3162 #, c-format msgid "" "the patch applies to '%s' (%s), which does not match the current contents." msgstr "补丁应用到 '%s'（%s），但是和当前内容不匹配。" -#: apply.c:3160 +#: apply.c:3170 #, c-format msgid "the patch applies to an empty '%s' but it is not empty" msgstr "补丁应用到空文件 '%s'，但其并非空文件" -#: apply.c:3178 +#: apply.c:3188 #, c-format msgid "the necessary postimage %s for '%s' cannot be read" msgstr "无法读取 '%2$s' 必需的目标文件 %1$s" -#: apply.c:3191 +#: apply.c:3201 #, c-format msgid "binary patch does not apply to '%s'" msgstr "二进制补丁未应用到 '%s'" -#: apply.c:3197 +#: apply.c:3207 #, c-format msgid "binary patch to '%s' creates incorrect result (expecting %s, got %s)" msgstr "到 '%s' 的二进制补丁产生了不正确的结果（应为 %s，却为 %s）" -#: apply.c:3218 +#: apply.c:3228 #, c-format msgid "patch failed: %s:%ld" msgstr "打补丁失败：%s:%ld" -#: apply.c:3341 +#: apply.c:3351 #, c-format msgid "cannot checkout %s" msgstr "不能检出 %s" -#: apply.c:3393 apply.c:3404 apply.c:3450 midx.c:61 setup.c:280 +#: apply.c:3403 apply.c:3414 apply.c:3460 midx.c:61 setup.c:280 #, c-format msgid "failed to read %s" msgstr "无法读取 %s" -#: apply.c:3401 +#: apply.c:3411 #, c-format msgid "reading from '%s' beyond a symbolic link" msgstr "读取位于符号链接中的 '%s'" -#: apply.c:3430 apply.c:3673 +#: apply.c:3440 apply.c:3683 #, c-format msgid "path %s has been renamed/deleted" msgstr "路径 %s 已经被重命名/删除" -#: apply.c:3516 apply.c:3688 +#: apply.c:3526 apply.c:3698 #, c-format msgid "%s: does not exist in index" msgstr "%s：不存在于索引中" -#: apply.c:3525 apply.c:3696 +#: apply.c:3535 apply.c:3706 #, c-format msgid "%s: does not match index" msgstr "%s：和索引不匹配" -#: apply.c:3560 +#: apply.c:3570 msgid "repository lacks the necessary blob to fall back on 3-way merge." msgstr "仓库缺乏必要的数据对象以进行三方合并。" -#: apply.c:3563 +#: apply.c:3573 #, c-format msgid "Falling back to three-way merge...\n" msgstr "回落到三方合并...\n" -#: apply.c:3579 apply.c:3583 +#: apply.c:3589 apply.c:3593 #, c-format msgid "cannot read the current contents of '%s'" msgstr "无法读取 '%s' 的当前内容" -#: apply.c:3595 +#: apply.c:3605 #, c-format msgid "Failed to fall back on three-way merge...\n" msgstr "无法回落到三方合并...\n" -#: apply.c:3609 +#: apply.c:3619 #, c-format msgid "Applied patch to '%s' with conflicts.\n" msgstr "应用补丁到 '%s' 存在冲突。\n" -#: apply.c:3614 +#: apply.c:3624 #, c-format msgid "Applied patch to '%s' cleanly.\n" msgstr "成功应用补丁到 '%s'。\n" -#: apply.c:3640 +#: apply.c:3650 msgid "removal patch leaves file contents" msgstr "移除补丁仍留下了文件内容" -#: apply.c:3713 +#: apply.c:3723 #, c-format msgid "%s: wrong type" msgstr "%s：错误类型" -#: apply.c:3715 +#: apply.c:3725 #, c-format msgid "%s has type %o, expected %o" msgstr "%s 的类型是 %o，应为 %o" -#: apply.c:3866 apply.c:3868 read-cache.c:830 read-cache.c:856 -#: read-cache.c:1309 +#: apply.c:3876 apply.c:3878 read-cache.c:830 read-cache.c:856 +#: read-cache.c:1320 #, c-format msgid "invalid path '%s'" msgstr "无效路径 '%s'" -#: apply.c:3924 +#: apply.c:3934 #, c-format msgid "%s: already exists in index" msgstr "%s：已经存在于索引中" -#: apply.c:3927 +#: apply.c:3937 #, c-format msgid "%s: already exists in working directory" msgstr "%s：已经存在于工作区中" -#: apply.c:3947 +#: apply.c:3957 #, c-format msgid "new mode (%o) of %s does not match old mode (%o)" msgstr "%2$s 的新模式（%1$o）和旧模式（%3$o）不匹配" -#: apply.c:3952 +#: apply.c:3962 #, c-format msgid "new mode (%o) of %s does not match old mode (%o) of %s" msgstr "%2$s 的新模式（%1$o）和 %4$s 的旧模式（%3$o）不匹配" -#: apply.c:3972 +#: apply.c:3982 #, c-format msgid "affected file '%s' is beyond a symbolic link" msgstr "受影响的文件 '%s' 位于符号链接中" -#: apply.c:3976 +#: apply.c:3986 #, c-format msgid "%s: patch does not apply" msgstr "%s：补丁未应用" -#: apply.c:3991 +#: apply.c:4001 #, c-format msgid "Checking patch %s..." msgstr "正在检查补丁 %s..." -#: apply.c:4083 +#: apply.c:4093 #, c-format msgid "sha1 information is lacking or useless for submodule %s" msgstr "子模组 %s 的 sha1 信息缺失或无效" -#: apply.c:4090 +#: apply.c:4100 #, c-format msgid "mode change for %s, which is not in current HEAD" msgstr "%s 的模式变更，但它不在当前 HEAD 中" -#: apply.c:4093 +#: apply.c:4103 #, c-format msgid "sha1 information is lacking or useless (%s)." msgstr "sha1 信息缺失或无效（%s）。" -#: apply.c:4098 builtin/checkout.c:279 builtin/reset.c:143 -#, c-format -msgid "make_cache_entry failed for path '%s'" -msgstr "对路径 '%s' 的 make_cache_entry 操作失败" - -#: apply.c:4102 +#: apply.c:4112 #, c-format msgid "could not add %s to temporary index" msgstr "不能在临时索引中添加 %s" -#: apply.c:4112 +#: apply.c:4122 #, c-format msgid "could not write temporary index to %s" msgstr "不能把临时索引写入到 %s" -#: apply.c:4250 +#: apply.c:4260 #, c-format msgid "unable to remove %s from index" msgstr "不能从索引中移除 %s" -#: apply.c:4284 +#: apply.c:4294 #, c-format msgid "corrupt patch for submodule %s" msgstr "子模组 %s 损坏的补丁" -#: apply.c:4290 +#: apply.c:4300 #, c-format msgid "unable to stat newly created file '%s'" msgstr "不能对新建文件 '%s' 调用 stat" -#: apply.c:4298 +#: apply.c:4308 #, c-format msgid "unable to create backing store for newly created file %s" msgstr "不能为新建文件 %s 创建后端存储" -#: apply.c:4304 apply.c:4449 +#: apply.c:4314 apply.c:4459 #, c-format msgid "unable to add cache entry for %s" msgstr "无法为 %s 添加缓存条目" -#: apply.c:4347 +#: apply.c:4357 #, c-format msgid "failed to write to '%s'" msgstr "写入 '%s' 失败" -#: apply.c:4351 +#: apply.c:4361 #, c-format msgid "closing file '%s'" msgstr "关闭文件 '%s'" -#: apply.c:4421 +#: apply.c:4431 #, c-format msgid "unable to write file '%s' mode %o" msgstr "不能写文件 '%s' 权限 %o" -#: apply.c:4519 +#: apply.c:4529 #, c-format msgid "Applied patch %s cleanly." msgstr "成功应用补丁 %s。" -#: apply.c:4527 +#: apply.c:4537 msgid "internal error" msgstr "内部错误" -#: apply.c:4530 +#: apply.c:4540 #, c-format msgid "Applying patch %%s with %d reject..." msgid_plural "Applying patch %%s with %d rejects..." msgstr[0] "应用 %%s 个补丁，其中 %d 个被拒绝..." msgstr[1] "应用 %%s 个补丁，其中 %d 个被拒绝..." -#: apply.c:4541 +#: apply.c:4551 #, c-format msgid "truncating .rej filename to %.*s.rej" msgstr "截短 .rej 文件名为 %.*s.rej" -#: apply.c:4549 builtin/fetch.c:898 builtin/fetch.c:1194 +#: apply.c:4559 builtin/fetch.c:901 builtin/fetch.c:1192 #, c-format msgid "cannot open %s" msgstr "不能打开 %s" -#: apply.c:4563 +#: apply.c:4573 #, c-format msgid "Hunk #%d applied cleanly." msgstr "第 #%d 个片段成功应用。" -#: apply.c:4567 +#: apply.c:4577 #, c-format msgid "Rejected hunk #%d." msgstr "拒绝第 #%d 个片段。" -#: apply.c:4686 +#: apply.c:4696 #, c-format msgid "Skipped patch '%s'." msgstr "略过补丁 '%s'。" -#: apply.c:4694 +#: apply.c:4704 msgid "unrecognized input" msgstr "未能识别的输入" -#: apply.c:4714 +#: apply.c:4724 msgid "unable to read index file" msgstr "无法读取索引文件" -#: apply.c:4871 +#: apply.c:4881 #, c-format msgid "can't open patch '%s': %s" msgstr "不能打开补丁 '%s'：%s" -#: apply.c:4898 +#: apply.c:4908 #, c-format msgid "squelched %d whitespace error" msgid_plural "squelched %d whitespace errors" msgstr[0] "抑制下仍有 %d 个空白字符误用" msgstr[1] "抑制下仍有 %d 个空白字符误用" -#: apply.c:4904 apply.c:4919 +#: apply.c:4914 apply.c:4929 #, c-format msgid "%d line adds whitespace errors." msgid_plural "%d lines add whitespace errors." msgstr[0] "%d 行新增了空白字符误用。" msgstr[1] "%d 行新增了空白字符误用。" -#: apply.c:4912 +#: apply.c:4922 #, c-format msgid "%d line applied after fixing whitespace errors." msgid_plural "%d lines applied after fixing whitespace errors." msgstr[0] "修复空白错误后，应用了 %d 行。" msgstr[1] "修复空白错误后，应用了 %d 行。" -#: apply.c:4928 builtin/add.c:540 builtin/mv.c:301 builtin/rm.c:390 +#: apply.c:4938 builtin/add.c:579 builtin/mv.c:301 builtin/rm.c:390 msgid "Unable to write new index file" msgstr "无法写入新索引文件" -#: apply.c:4955 apply.c:4958 builtin/am.c:2197 builtin/am.c:2200 -#: builtin/clone.c:122 builtin/fetch.c:143 builtin/merge.c:273 -#: builtin/pull.c:209 builtin/submodule--helper.c:407 -#: builtin/submodule--helper.c:1367 builtin/submodule--helper.c:1370 -#: builtin/submodule--helper.c:1850 builtin/submodule--helper.c:1853 -#: builtin/submodule--helper.c:2092 git-add--interactive.perl:211 -msgid "path" -msgstr "路径" - -#: apply.c:4956 +#: apply.c:4966 msgid "don't apply changes matching the given path" msgstr "不要应用与给出路径向匹配的变更" -#: apply.c:4959 +#: apply.c:4969 msgid "apply changes matching the given path" msgstr "应用与给出路径向匹配的变更" -#: apply.c:4961 builtin/am.c:2206 +#: apply.c:4971 builtin/am.c:2206 msgid "num" msgstr "数字" -#: apply.c:4962 +#: apply.c:4972 msgid "remove leading slashes from traditional diff paths" msgstr "从传统的 diff 路径中移除指定数量的前导斜线" -#: apply.c:4965 +#: apply.c:4975 msgid "ignore additions made by the patch" msgstr "忽略补丁中的添加的文件" -#: apply.c:4967 +#: apply.c:4977 msgid "instead of applying the patch, output diffstat for the input" msgstr "不应用补丁，而是显示输入的差异统计（diffstat）" -#: apply.c:4971 +#: apply.c:4981 msgid "show number of added and deleted lines in decimal notation" msgstr "以十进制数显示添加和删除的行数" -#: apply.c:4973 +#: apply.c:4983 msgid "instead of applying the patch, output a summary for the input" msgstr "不应用补丁，而是显示输入的概要" -#: apply.c:4975 +#: apply.c:4985 msgid "instead of applying the patch, see if the patch is applicable" msgstr "不应用补丁，而是查看补丁是否可应用" -#: apply.c:4977 +#: apply.c:4987 msgid "make sure the patch is applicable to the current index" msgstr "确认补丁可以应用到当前索引" -#: apply.c:4979 +#: apply.c:4989 msgid "mark new files with `git add --intent-to-add`" msgstr "使用命令 `git add --intent-to-add` 标记新增文件" -#: apply.c:4981 +#: apply.c:4991 msgid "apply a patch without touching the working tree" msgstr "应用补丁而不修改工作区" -#: apply.c:4983 +#: apply.c:4993 msgid "accept a patch that touches outside the working area" msgstr "接受修改工作区之外文件的补丁" -#: apply.c:4986 +#: apply.c:4996 msgid "also apply the patch (use with --stat/--summary/--check)" msgstr "还应用此补丁（与 --stat/--summary/--check 选项同时使用）" -#: apply.c:4988 +#: apply.c:4998 msgid "attempt three-way merge if a patch does not apply" msgstr "如果一个补丁不能应用则尝试三方合并" -#: apply.c:4990 +#: apply.c:5000 msgid "build a temporary index based on embedded index information" msgstr "创建一个临时索引基于嵌入的索引信息" -#: apply.c:4993 builtin/checkout-index.c:173 builtin/ls-files.c:524 +#: apply.c:5003 builtin/checkout-index.c:173 builtin/ls-files.c:524 msgid "paths are separated with NUL character" msgstr "路径以 NUL 字符分隔" -#: apply.c:4995 +#: apply.c:5005 msgid "ensure at least lines of context match" msgstr "确保至少匹配 行上下文" -#: apply.c:4996 builtin/am.c:2185 builtin/interpret-trailers.c:98 +#: apply.c:5006 builtin/am.c:2185 builtin/interpret-trailers.c:98 #: builtin/interpret-trailers.c:100 builtin/interpret-trailers.c:102 -#: builtin/pack-objects.c:3310 builtin/rebase.c:1445 +#: builtin/pack-objects.c:3310 builtin/rebase.c:1474 msgid "action" msgstr "动作" -#: apply.c:4997 +#: apply.c:5007 msgid "detect new or modified lines that have whitespace errors" msgstr "检查新增和修改的行中间的空白字符滥用" -#: apply.c:5000 apply.c:5003 +#: apply.c:5010 apply.c:5013 msgid "ignore changes in whitespace when finding context" msgstr "查找上下文时忽略空白字符的变更" -#: apply.c:5006 +#: apply.c:5016 msgid "apply the patch in reverse" msgstr "反向应用补丁" -#: apply.c:5008 +#: apply.c:5018 msgid "don't expect at least one line of context" msgstr "无需至少一行上下文" -#: apply.c:5010 +#: apply.c:5020 msgid "leave the rejected hunks in corresponding *.rej files" msgstr "将拒绝的补丁片段保存在对应的 *.rej 文件中" -#: apply.c:5012 +#: apply.c:5022 msgid "allow overlapping hunks" msgstr "允许重叠的补丁片段" -#: apply.c:5013 builtin/add.c:291 builtin/check-ignore.c:22 -#: builtin/commit.c:1337 builtin/count-objects.c:98 builtin/fsck.c:786 -#: builtin/log.c:2085 builtin/mv.c:123 builtin/read-tree.c:128 +#: apply.c:5023 builtin/add.c:309 builtin/check-ignore.c:22 +#: builtin/commit.c:1355 builtin/count-objects.c:98 builtin/fsck.c:774 +#: builtin/log.c:2166 builtin/mv.c:123 builtin/read-tree.c:128 msgid "be verbose" msgstr "冗长输出" -#: apply.c:5015 +#: apply.c:5025 msgid "tolerate incorrectly detected missing new-line at the end of file" msgstr "允许不正确的文件末尾换行符" -#: apply.c:5018 +#: apply.c:5028 msgid "do not trust the line counts in the hunk headers" msgstr "不信任补丁片段的头信息中的行号" -#: apply.c:5020 builtin/am.c:2194 +#: apply.c:5030 builtin/am.c:2194 msgid "root" msgstr "根目录" -#: apply.c:5021 +#: apply.c:5031 msgid "prepend to all filenames" msgstr "为所有文件名前添加 <根目录>" #: archive.c:14 msgid "git archive [] [...]" -msgstr "git archive [<选项>] <树或提交> [<路径>...]" +msgstr "git archive [<选项>] <树对象> [<路径>...]" #: archive.c:15 msgid "git archive --list" @@ -884,13 +1291,13 @@ msgstr "git archive --list" msgid "" "git archive --remote [--exec ] [] [...]" msgstr "" -"git archive --remote <仓库> [--exec <命令>] [<选项>] <树或提交> [<路径>...]" +"git archive --remote <仓库> [--exec <命令>] [<选项>] <树对象> [<路径>...]" #: archive.c:17 msgid "git archive --remote [--exec ] --list" msgstr "git archive --remote <仓库> [--exec <命令>] --list" -#: archive.c:372 builtin/add.c:177 builtin/add.c:516 builtin/rm.c:299 +#: archive.c:372 builtin/add.c:180 builtin/add.c:555 builtin/rm.c:299 #, c-format msgid "pathspec '%s' did not match any files" msgstr "路径规格 '%s' 未匹配任何文件" @@ -922,7 +1329,7 @@ msgstr "格式" msgid "archive format" msgstr "归档格式" -#: archive.c:458 builtin/log.c:1581 +#: archive.c:458 builtin/log.c:1653 msgid "prefix" msgstr "前缀" @@ -930,12 +1337,12 @@ msgstr "前缀" msgid "prepend prefix to each pathname in the archive" msgstr "为归档中每个路径名加上前缀" -#: archive.c:460 builtin/blame.c:861 builtin/blame.c:873 builtin/blame.c:874 +#: archive.c:460 builtin/blame.c:861 builtin/blame.c:865 builtin/blame.c:866 #: builtin/commit-tree.c:117 builtin/config.c:129 builtin/fast-export.c:1162 #: builtin/fast-export.c:1164 builtin/fast-export.c:1168 builtin/grep.c:899 #: builtin/hash-object.c:105 builtin/ls-files.c:560 builtin/ls-files.c:563 #: builtin/notes.c:412 builtin/notes.c:578 builtin/read-tree.c:123 -#: parse-options.h:186 +#: parse-options.h:190 msgid "file" msgstr "文件" @@ -967,8 +1374,8 @@ msgstr "压缩效果更好" msgid "list supported archive formats" msgstr "列出支持的归档格式" -#: archive.c:479 builtin/archive.c:91 builtin/clone.c:112 builtin/clone.c:115 -#: builtin/submodule--helper.c:1379 builtin/submodule--helper.c:1859 +#: archive.c:479 builtin/archive.c:91 builtin/clone.c:113 builtin/clone.c:116 +#: builtin/submodule--helper.c:1391 builtin/submodule--helper.c:1884 msgid "repo" msgstr "仓库" @@ -1007,17 +1414,17 @@ msgstr "未知归档格式 '%s'" msgid "Argument not supported for format '%s': -%d" msgstr "参数不支持此格式 '%s'：-%d" -#: archive-tar.c:125 archive-zip.c:345 +#: archive-tar.c:125 archive-zip.c:350 #, c-format msgid "cannot stream blob %s" msgstr "不能打开数据对象 %s" -#: archive-tar.c:266 archive-zip.c:363 +#: archive-tar.c:266 archive-zip.c:368 #, c-format msgid "unsupported file mode: 0%o (SHA1: %s)" msgstr "不支持的文件模式：0%o (SHA1: %s)" -#: archive-tar.c:293 archive-zip.c:353 +#: archive-tar.c:293 archive-zip.c:358 #, c-format msgid "cannot read %s" msgstr "不能读取 %s" @@ -1036,37 +1443,37 @@ msgstr "无法重定向描述符" msgid "'%s' filter reported error" msgstr "'%s' 过滤器报告了错误" -#: archive-zip.c:314 +#: archive-zip.c:319 #, c-format msgid "path is not valid UTF-8: %s" msgstr "路径不是有效的 UTF-8：%s" -#: archive-zip.c:318 +#: archive-zip.c:323 #, c-format msgid "path too long (%d chars, SHA1: %s): %s" msgstr "路径太长（%d 字符，SHA1：%s）：%s" -#: archive-zip.c:474 builtin/pack-objects.c:230 builtin/pack-objects.c:233 +#: archive-zip.c:479 builtin/pack-objects.c:230 builtin/pack-objects.c:233 #, c-format msgid "deflate error (%d)" msgstr "压缩错误 (%d)" -#: archive-zip.c:609 +#: archive-zip.c:614 #, c-format msgid "timestamp too large for this system: %" msgstr "对于本系统时间戳太大：%" -#: attr.c:213 +#: attr.c:212 #, c-format msgid "%.*s is not a valid attribute name" msgstr "%.*s 不是一个有效的属性名" -#: attr.c:370 +#: attr.c:369 #, c-format msgid "%s not allowed: %s:%d" msgstr "不允许 %s：%s:%d" -#: attr.c:410 +#: attr.c:409 msgid "" "Negative patterns are ignored in git attributes\n" "Use '\\!' for literal leading exclamation." @@ -1205,9 +1612,9 @@ msgstr "不能将 --contents 和最终的提交对象名共用" msgid "--reverse and --first-parent together require specified latest commit" msgstr "--reverse 和 --first-parent 共用，需要指定最新的提交" -#: blame.c:2744 bundle.c:167 ref-filter.c:2203 remote.c:1941 sequencer.c:1971 -#: sequencer.c:4305 builtin/commit.c:1020 builtin/log.c:387 builtin/log.c:964 -#: builtin/log.c:1452 builtin/log.c:1844 builtin/log.c:2134 builtin/merge.c:411 +#: blame.c:2744 bundle.c:167 ref-filter.c:2203 remote.c:1941 sequencer.c:2093 +#: sequencer.c:4460 builtin/commit.c:1040 builtin/log.c:388 builtin/log.c:991 +#: builtin/log.c:1520 builtin/log.c:1925 builtin/log.c:2215 builtin/merge.c:411 #: builtin/pack-objects.c:3128 builtin/pack-objects.c:3143 #: builtin/shortlog.c:192 msgid "revision walk setup failed" @@ -1371,8 +1778,8 @@ msgstr "'%s' 不像是一个 v2 版本的包文件" msgid "unrecognized header: %s%s (%d)" msgstr "未能识别的包头：%s%s (%d)" -#: bundle.c:90 rerere.c:480 rerere.c:690 sequencer.c:2221 sequencer.c:2962 -#: builtin/commit.c:791 +#: bundle.c:90 rerere.c:480 rerere.c:690 sequencer.c:2344 sequencer.c:3108 +#: builtin/commit.c:811 #, c-format msgid "could not open '%s'" msgstr "不能打开 '%s'" @@ -1403,42 +1810,42 @@ msgid_plural "The bundle requires these %d refs:" msgstr[0] "这个包需要这个引用：" msgstr[1] "这个包需要 %d 个引用：" -#: bundle.c:272 +#: bundle.c:273 msgid "unable to dup bundle descriptor" msgstr "无法复制 bundle 描述符" -#: bundle.c:279 +#: bundle.c:280 msgid "Could not spawn pack-objects" msgstr "不能生成 pack-objects 进程" -#: bundle.c:290 +#: bundle.c:291 msgid "pack-objects died" msgstr "pack-objects 终止" -#: bundle.c:332 +#: bundle.c:333 msgid "rev-list died" msgstr "rev-list 终止" -#: bundle.c:381 +#: bundle.c:382 #, c-format msgid "ref '%s' is excluded by the rev-list options" msgstr "引用 '%s' 被 rev-list 选项排除" -#: bundle.c:460 builtin/log.c:202 builtin/log.c:1733 builtin/shortlog.c:306 +#: bundle.c:461 builtin/log.c:203 builtin/log.c:1814 builtin/shortlog.c:306 #, c-format msgid "unrecognized argument: %s" msgstr "未能识别的参数：%s" -#: bundle.c:468 +#: bundle.c:469 msgid "Refusing to create empty bundle." msgstr "不能创建空包。" -#: bundle.c:478 +#: bundle.c:479 #, c-format msgid "cannot create '%s'" msgstr "不能创建 '%s'" -#: bundle.c:503 +#: bundle.c:504 msgid "index-pack died" msgstr "index-pack 终止" @@ -1447,18 +1854,18 @@ msgstr "index-pack 终止" msgid "invalid color value: %.*s" msgstr "无效的颜色值：%.*s" -#: commit.c:50 sequencer.c:2665 builtin/am.c:354 builtin/am.c:398 +#: commit.c:51 sequencer.c:2811 builtin/am.c:354 builtin/am.c:398 #: builtin/am.c:1366 builtin/am.c:2009 builtin/replace.c:456 #, c-format msgid "could not parse %s" msgstr "不能解析 %s" -#: commit.c:52 +#: commit.c:53 #, c-format msgid "%s %s is not a commit!" msgstr "%s %s 不是一个提交！" -#: commit.c:192 +#: commit.c:193 msgid "" "Support for /info/grafts is deprecated\n" "and will be removed in a future Git version.\n" @@ -1478,27 +1885,27 @@ msgstr "" "设置 \"git config advice.graftFileDeprecated false\"\n" "可关闭本消息" -#: commit.c:1128 +#: commit.c:1152 #, c-format msgid "Commit %s has an untrusted GPG signature, allegedly by %s." msgstr "提交 %s 有一个非可信的声称来自 %s 的 GPG 签名。" -#: commit.c:1131 +#: commit.c:1155 #, c-format msgid "Commit %s has a bad GPG signature allegedly by %s." msgstr "提交 %s 有一个错误的声称来自 %s 的 GPG 签名。" -#: commit.c:1134 +#: commit.c:1158 #, c-format msgid "Commit %s does not have a GPG signature." msgstr "提交 %s 没有 GPG 签名。" -#: commit.c:1137 +#: commit.c:1161 #, c-format msgid "Commit %s has a good GPG signature by %s\n" msgstr "提交 %s 有一个来自 %s 的好的 GPG 签名。\n" -#: commit.c:1391 +#: commit.c:1415 msgid "" "Warning: commit message did not conform to UTF-8.\n" "You may want to amend it after fixing the message, or set the config\n" @@ -1508,75 +1915,70 @@ msgstr "" "您可以通过修补提交来改正提交说明，或者将配置变量 i18n.commitencoding\n" "设置为您项目所用的字符编码。\n" -#: commit-graph.c:127 +#: commit-graph.c:130 msgid "commit-graph file is too small" msgstr "提交图形文件太小" -#: commit-graph.c:192 +#: commit-graph.c:195 #, c-format msgid "commit-graph signature %X does not match signature %X" msgstr "提交图形签名 %X 和签名 %X 不匹配" -#: commit-graph.c:199 +#: commit-graph.c:202 #, c-format msgid "commit-graph version %X does not match version %X" msgstr "提交图形版本 %X 和版本 %X 不匹配" -#: commit-graph.c:206 +#: commit-graph.c:209 #, c-format msgid "commit-graph hash version %X does not match version %X" msgstr "提交图形哈希版本 %X 和版本 %X 不匹配" -#: commit-graph.c:229 +#: commit-graph.c:232 msgid "commit-graph chunk lookup table entry missing; file may be incomplete" msgstr "提交图形块查找表条目丢失，文件可能不完整" -#: commit-graph.c:240 +#: commit-graph.c:243 #, c-format msgid "commit-graph improper chunk offset %08x%08x" msgstr "提交图形不正确的块偏移 %08x%08x" -#: commit-graph.c:283 +#: commit-graph.c:286 #, c-format msgid "commit-graph chunk id %08x appears multiple times" msgstr "提交图形块 id %08x 出现了多次" -#: commit-graph.c:347 +#: commit-graph.c:350 msgid "commit-graph has no base graphs chunk" msgstr "提交图形没有基础图形块" -#: commit-graph.c:357 +#: commit-graph.c:360 msgid "commit-graph chain does not match" msgstr "提交图形链不匹配" -#: commit-graph.c:404 +#: commit-graph.c:407 #, c-format msgid "invalid commit-graph chain: line '%s' not a hash" msgstr "无效的提交图形链：行 '%s' 不是一个哈希值" -#: commit-graph.c:430 +#: commit-graph.c:433 msgid "unable to find all commit-graph files" msgstr "无法找到所有提交图形文件" -#: commit-graph.c:561 commit-graph.c:621 +#: commit-graph.c:564 commit-graph.c:624 msgid "invalid commit position. commit-graph is likely corrupt" msgstr "无效的提交位置。提交图形可能已损坏" -#: commit-graph.c:582 +#: commit-graph.c:585 #, c-format msgid "could not find commit %s" msgstr "无法找到提交 %s" -#: commit-graph.c:855 builtin/am.c:1287 +#: commit-graph.c:858 builtin/am.c:1287 #, c-format msgid "unable to parse commit %s" msgstr "不能解析提交 %s" -#: commit-graph.c:859 -#, c-format -msgid "unable to get tree for %s" -msgstr "无法得到 %s 的树对象" - #: commit-graph.c:1017 builtin/pack-objects.c:2641 #, c-format msgid "unable to get type of object %s" @@ -1643,12 +2045,12 @@ msgstr "正在查找提交图中额外的边" msgid "failed to write correct number of base graph ids" msgstr "无法写入正确数量的基础图形 ID" -#: commit-graph.c:1379 midx.c:810 +#: commit-graph.c:1379 midx.c:814 #, c-format msgid "unable to create leading directories of %s" msgstr "不能为 %s 创建先导目录" -#: commit-graph.c:1391 builtin/index-pack.c:306 builtin/repack.c:241 +#: commit-graph.c:1391 builtin/index-pack.c:306 builtin/repack.c:248 #, c-format msgid "unable to create '%s'" msgstr "不能创建 '%s'" @@ -1806,7 +2208,7 @@ msgstr "键名没有包含一个小节名称：%s" msgid "key does not contain variable name: %s" msgstr "键名没有包含变量名：%s" -#: config.c:406 sequencer.c:2401 +#: config.c:406 sequencer.c:2530 #, c-format msgid "invalid key: %s" msgstr "无效键名：%s" @@ -1928,144 +2330,144 @@ msgstr "core.commentChar 应该是一个字符" msgid "invalid mode for object creation: %s" msgstr "无效的对象创建模式：%s" -#: config.c:1425 +#: config.c:1430 #, c-format msgid "malformed value for %s" msgstr "%s 的取值格式错误" -#: config.c:1451 +#: config.c:1456 #, c-format msgid "malformed value for %s: %s" msgstr "%s 的取值格式错误：%s" -#: config.c:1452 +#: config.c:1457 msgid "must be one of nothing, matching, simple, upstream or current" msgstr "必须是其中之一：nothing、matching、simple、upstream 或 current" -#: config.c:1513 builtin/pack-objects.c:3394 +#: config.c:1518 builtin/pack-objects.c:3394 #, c-format msgid "bad pack compression level %d" msgstr "错误的打包压缩级别 %d" -#: config.c:1634 +#: config.c:1639 #, c-format msgid "unable to load config blob object '%s'" msgstr "无法从数据对象 '%s' 加载配置" -#: config.c:1637 +#: config.c:1642 #, c-format msgid "reference '%s' does not point to a blob" msgstr "引用 '%s' 没有指向一个数据对象" -#: config.c:1654 +#: config.c:1659 #, c-format msgid "unable to resolve config blob '%s'" msgstr "不能解析配置对象 '%s'" -#: config.c:1684 +#: config.c:1689 #, c-format msgid "failed to parse %s" msgstr "解析 %s 失败" -#: config.c:1740 +#: config.c:1745 msgid "unable to parse command-line config" msgstr "无法解析命令行中的配置" -#: config.c:2091 +#: config.c:2096 msgid "unknown error occurred while reading the configuration files" msgstr "在读取配置文件时遇到未知错误" -#: config.c:2261 +#: config.c:2266 #, c-format msgid "Invalid %s: '%s'" msgstr "无效 %s：'%s'" -#: config.c:2306 +#: config.c:2311 #, c-format msgid "splitIndex.maxPercentChange value '%d' should be between 0 and 100" msgstr "splitIndex.maxPercentChange 的取值 '%d' 应该介于 0 和 100 之间" -#: config.c:2352 +#: config.c:2357 #, c-format msgid "unable to parse '%s' from command-line config" msgstr "无法解析命令行配置中的 '%s'" -#: config.c:2354 +#: config.c:2359 #, c-format msgid "bad config variable '%s' in file '%s' at line %d" msgstr "在文件 '%2$s' 的第 %3$d 行发现错误的配置变量 '%1$s'" -#: config.c:2435 +#: config.c:2440 #, c-format msgid "invalid section name '%s'" msgstr "无效的小节名称 '%s'" -#: config.c:2467 +#: config.c:2472 #, c-format msgid "%s has multiple values" msgstr "%s 有多个取值" -#: config.c:2496 +#: config.c:2501 #, c-format msgid "failed to write new configuration file %s" msgstr "写入新的配置文件 %s 失败" -#: config.c:2748 config.c:3072 +#: config.c:2753 config.c:3077 #, c-format msgid "could not lock config file %s" msgstr "不能锁定配置文件 %s" -#: config.c:2759 +#: config.c:2764 #, c-format msgid "opening %s" msgstr "打开 %s" -#: config.c:2794 builtin/config.c:328 +#: config.c:2799 builtin/config.c:328 #, c-format msgid "invalid pattern: %s" msgstr "无效模式：%s" -#: config.c:2819 +#: config.c:2824 #, c-format msgid "invalid config file %s" msgstr "无效的配置文件 %s" -#: config.c:2832 config.c:3085 +#: config.c:2837 config.c:3090 #, c-format msgid "fstat on %s failed" msgstr "对 %s 调用 fstat 失败" -#: config.c:2843 +#: config.c:2848 #, c-format msgid "unable to mmap '%s'" msgstr "不能 mmap '%s'" -#: config.c:2852 config.c:3090 +#: config.c:2857 config.c:3095 #, c-format msgid "chmod on %s failed" msgstr "对 %s 调用 chmod 失败" -#: config.c:2937 config.c:3187 +#: config.c:2942 config.c:3192 #, c-format msgid "could not write config file %s" msgstr "不能写入配置文件 %s" -#: config.c:2971 +#: config.c:2976 #, c-format msgid "could not set '%s' to '%s'" msgstr "不能设置 '%s' 为 '%s'" -#: config.c:2973 builtin/remote.c:782 +#: config.c:2978 builtin/remote.c:781 #, c-format msgid "could not unset '%s'" msgstr "不能取消设置 '%s'" -#: config.c:3063 +#: config.c:3068 #, c-format msgid "invalid section name: %s" msgstr "无效的小节名称：%s" -#: config.c:3230 +#: config.c:3235 #, c-format msgid "missing value for '%s'" msgstr "%s 的取值缺失" @@ -2228,19 +2630,19 @@ msgstr "已阻止奇怪的路径名 '%s'" msgid "unable to fork" msgstr "无法 fork" -#: connected.c:88 builtin/fsck.c:221 builtin/prune.c:43 +#: connected.c:89 builtin/fsck.c:208 builtin/prune.c:43 msgid "Checking connectivity" msgstr "正在检查连通性" -#: connected.c:100 +#: connected.c:101 msgid "Could not run 'git rev-list'" msgstr "不能执行 'git rev-list'" -#: connected.c:120 +#: connected.c:121 msgid "failed write to rev-list" msgstr "写入 rev-list 失败" -#: connected.c:127 +#: connected.c:128 msgid "failed to close rev-list's stdin" msgstr "关闭 rev-list 的标准输入失败" @@ -2277,24 +2679,24 @@ msgstr "" "%s 中的 LF 将被 CRLF 替换。\n" "在工作区中该文件仍保持原有的换行符" -#: convert.c:280 +#: convert.c:284 #, c-format msgid "BOM is prohibited in '%s' if encoded as %s" msgstr "如果使用 %2$s 编码，禁止在 '%1$s' 中使用 BOM" -#: convert.c:287 +#: convert.c:291 #, c-format msgid "" -"The file '%s' contains a byte order mark (BOM). Please use UTF-%s as working-" -"tree-encoding." -msgstr "文件 '%s' 包含一个字节顺序标记（BOM）。请使用 UTF-%s 作为工作区编码。" +"The file '%s' contains a byte order mark (BOM). Please use UTF-%.*s as " +"working-tree-encoding." +msgstr "文件 '%s' 包含一个字节顺序标记（BOM）。请使用 UTF-%.*s 作为工作区编码。" -#: convert.c:305 +#: convert.c:304 #, c-format msgid "BOM is required in '%s' if encoded as %s" msgstr "如果编码为 %2$s，需要在 '%1$s' 中使用 BOM" -#: convert.c:307 +#: convert.c:306 #, c-format msgid "" "The file '%s' is missing a byte order mark (BOM). Please use UTF-%sBE or UTF-" @@ -2303,66 +2705,66 @@ msgstr "" "文件 '%s' 缺失一个字节顺序标记（BOM）。请使用 UTF-%sBE or UTF-%sLE（取决于字" "节序）作为工作区编码。" -#: convert.c:425 convert.c:496 +#: convert.c:419 convert.c:490 #, c-format msgid "failed to encode '%s' from %s to %s" msgstr "无法对 '%s' 进行从 %s 到 %s 的编码" -#: convert.c:468 +#: convert.c:462 #, c-format msgid "encoding '%s' from %s to %s and back is not the same" msgstr "将'%s' 的编码从 %s 到 %s 来回转换不一致" -#: convert.c:674 +#: convert.c:668 #, c-format msgid "cannot fork to run external filter '%s'" msgstr "不能 fork 以执行外部过滤器 '%s'" -#: convert.c:694 +#: convert.c:688 #, c-format msgid "cannot feed the input to external filter '%s'" msgstr "不能将输入传递给外部过滤器 '%s'" -#: convert.c:701 +#: convert.c:695 #, c-format msgid "external filter '%s' failed %d" msgstr "外部过滤器 '%s' 失败码 %d" -#: convert.c:736 convert.c:739 +#: convert.c:730 convert.c:733 #, c-format msgid "read from external filter '%s' failed" msgstr "从外部过滤器 '%s' 读取失败" -#: convert.c:742 convert.c:797 +#: convert.c:736 convert.c:791 #, c-format msgid "external filter '%s' failed" msgstr "外部过滤器 '%s' 失败" -#: convert.c:845 +#: convert.c:839 msgid "unexpected filter type" msgstr "意外的过滤类型" -#: convert.c:856 +#: convert.c:850 msgid "path name too long for external filter" msgstr "外部过滤器的路径名太长" -#: convert.c:930 +#: convert.c:924 #, c-format msgid "" "external filter '%s' is not available anymore although not all paths have " "been filtered" msgstr "外部过滤器 '%s' 不再可用，但并非所有路径都已过滤" -#: convert.c:1229 +#: convert.c:1223 msgid "true/false are no valid working-tree-encodings" msgstr "true/false 不是有效的工作区编码" -#: convert.c:1417 convert.c:1451 +#: convert.c:1411 convert.c:1445 #, c-format msgid "%s: clean filter '%s' failed" msgstr "%s：clean 过滤器 '%s' 失败" -#: convert.c:1495 +#: convert.c:1489 #, c-format msgid "%s: smudge filter %s failed" msgstr "%s：smudge 过滤器 %s 失败" @@ -2527,35 +2929,35 @@ msgstr "" "发现配置变量 'diff.dirstat' 中的错误：\n" "%s" -#: diff.c:4218 +#: diff.c:4202 #, c-format msgid "external diff died, stopping at %s" msgstr "外部 diff 退出，停止在 %s" -#: diff.c:4563 +#: diff.c:4547 msgid "--name-only, --name-status, --check and -s are mutually exclusive" msgstr "--name-only、--name-status、--check 和 -s 是互斥的" -#: diff.c:4566 +#: diff.c:4550 msgid "-G, -S and --find-object are mutually exclusive" msgstr "-G、-S 和 --find-object 是互斥的" -#: diff.c:4644 +#: diff.c:4628 msgid "--follow requires exactly one pathspec" msgstr "--follow 明确要求只跟一个路径规格" -#: diff.c:4692 +#: diff.c:4676 #, c-format msgid "invalid --stat value: %s" msgstr "无效的 --stat 值：%s" -#: diff.c:4697 diff.c:4702 diff.c:4707 diff.c:4712 diff.c:5225 +#: diff.c:4681 diff.c:4686 diff.c:4691 diff.c:4696 diff.c:5209 #: parse-options.c:199 parse-options.c:203 #, c-format msgid "%s expects a numerical value" msgstr "%s 期望一个数字值" -#: diff.c:4729 +#: diff.c:4713 #, c-format msgid "" "Failed to parse --dirstat/-X option parameter:\n" @@ -2564,195 +2966,195 @@ msgstr "" "无法解析 --dirstat/-X 选项的参数：\n" "%s" -#: diff.c:4814 +#: diff.c:4798 #, c-format msgid "unknown change class '%c' in --diff-filter=%s" msgstr "--diff-filter=%2$s 中未知的变更类 '%1$c'" -#: diff.c:4838 +#: diff.c:4822 #, c-format msgid "unknown value after ws-error-highlight=%.*s" msgstr "ws-error-highlight=%.*s 之后未知的值" -#: diff.c:4852 +#: diff.c:4836 #, c-format msgid "unable to resolve '%s'" msgstr "不能解析 '%s'" -#: diff.c:4902 diff.c:4908 +#: diff.c:4886 diff.c:4892 #, c-format msgid "%s expects / form" msgstr "%s 期望 / 格式" -#: diff.c:4920 +#: diff.c:4904 #, c-format msgid "%s expects a character, got '%s'" msgstr "%s 期望一个字符，得到 '%s'" -#: diff.c:4941 +#: diff.c:4925 #, c-format msgid "bad --color-moved argument: %s" msgstr "坏的 --color-moved 参数：%s" -#: diff.c:4960 +#: diff.c:4944 #, c-format msgid "invalid mode '%s' in --color-moved-ws" msgstr "--color-moved-ws 中的无效模式 '%s' " -#: diff.c:5000 +#: diff.c:4984 msgid "" "option diff-algorithm accepts \"myers\", \"minimal\", \"patience\" and " "\"histogram\"" msgstr "" "diff-algorithm 选项有 \"myers\"、\"minimal\"、\"patience\" 和 \"histogram\"" -#: diff.c:5036 diff.c:5056 +#: diff.c:5020 diff.c:5040 #, c-format msgid "invalid argument to %s" msgstr "%s 的参数无效" -#: diff.c:5194 +#: diff.c:5178 #, c-format msgid "failed to parse --submodule option parameter: '%s'" msgstr "无法解析 --submodule 选项的参数：'%s'" -#: diff.c:5250 +#: diff.c:5234 #, c-format msgid "bad --word-diff argument: %s" msgstr "坏的 --word-diff 参数：%s" -#: diff.c:5273 +#: diff.c:5257 msgid "Diff output format options" msgstr "差异输出格式化选项" -#: diff.c:5275 diff.c:5281 +#: diff.c:5259 diff.c:5265 msgid "generate patch" msgstr "生成补丁" -#: diff.c:5278 builtin/log.c:172 +#: diff.c:5262 builtin/log.c:173 msgid "suppress diff output" msgstr "不显示差异输出" -#: diff.c:5283 diff.c:5397 diff.c:5404 +#: diff.c:5267 diff.c:5381 diff.c:5388 msgid "" msgstr "" -#: diff.c:5284 diff.c:5287 +#: diff.c:5268 diff.c:5271 msgid "generate diffs with lines context" msgstr "生成含 行上下文的差异" -#: diff.c:5289 +#: diff.c:5273 msgid "generate the diff in raw format" msgstr "生成原始格式的差异" -#: diff.c:5292 +#: diff.c:5276 msgid "synonym for '-p --raw'" msgstr "和 '-p --raw' 同义" -#: diff.c:5296 +#: diff.c:5280 msgid "synonym for '-p --stat'" msgstr "和 '-p --stat' 同义" -#: diff.c:5300 +#: diff.c:5284 msgid "machine friendly --stat" msgstr "机器友好的 --stat" -#: diff.c:5303 +#: diff.c:5287 msgid "output only the last line of --stat" msgstr "只输出 --stat 的最后一行" -#: diff.c:5305 diff.c:5313 +#: diff.c:5289 diff.c:5297 msgid "..." msgstr "<参数1,参数2>..." -#: diff.c:5306 +#: diff.c:5290 msgid "" "output the distribution of relative amount of changes for each sub-directory" msgstr "输出每个子目录相对变更的分布" -#: diff.c:5310 +#: diff.c:5294 msgid "synonym for --dirstat=cumulative" msgstr "和 --dirstat=cumulative 同义" -#: diff.c:5314 +#: diff.c:5298 msgid "synonym for --dirstat=files,param1,param2..." msgstr "是 --dirstat=files,param1,param2... 的同义词" -#: diff.c:5318 +#: diff.c:5302 msgid "warn if changes introduce conflict markers or whitespace errors" msgstr "如果变更中引入冲突定界符或空白错误，给出警告" -#: diff.c:5321 +#: diff.c:5305 msgid "condensed summary such as creations, renames and mode changes" msgstr "精简摘要，例如创建、重命名和模式变更" -#: diff.c:5324 +#: diff.c:5308 msgid "show only names of changed files" msgstr "只显示变更文件的文件名" -#: diff.c:5327 +#: diff.c:5311 msgid "show only names and status of changed files" msgstr "只显示变更文件的文件名和状态" -#: diff.c:5329 +#: diff.c:5313 msgid "[,[,]]" msgstr "<宽度>[,<文件名宽度>[,<次数>]]" -#: diff.c:5330 +#: diff.c:5314 msgid "generate diffstat" msgstr "生成差异统计（diffstat）" -#: diff.c:5332 diff.c:5335 diff.c:5338 +#: diff.c:5316 diff.c:5319 diff.c:5322 msgid "" msgstr "<宽度>" -#: diff.c:5333 +#: diff.c:5317 msgid "generate diffstat with a given width" msgstr "使用给定的长度生成差异统计" -#: diff.c:5336 +#: diff.c:5320 msgid "generate diffstat with a given name width" msgstr "使用给定的文件名长度生成差异统计" -#: diff.c:5339 +#: diff.c:5323 msgid "generate diffstat with a given graph width" msgstr "使用给定的图形长度生成差异统计" -#: diff.c:5341 +#: diff.c:5325 msgid "" msgstr "<次数>" -#: diff.c:5342 +#: diff.c:5326 msgid "generate diffstat with limited lines" msgstr "生成有限行数的差异统计" -#: diff.c:5345 +#: diff.c:5329 msgid "generate compact summary in diffstat" msgstr "生成差异统计的简洁摘要" -#: diff.c:5348 +#: diff.c:5332 msgid "output a binary diff that can be applied" msgstr "输出一个可以应用的二进制差异" -#: diff.c:5351 +#: diff.c:5335 msgid "show full pre- and post-image object names on the \"index\" lines" msgstr "在 \"index\" 行显示完整的前后对象名称" -#: diff.c:5353 +#: diff.c:5337 msgid "show colored diff" msgstr "显示带颜色的差异" -#: diff.c:5354 +#: diff.c:5338 msgid "" msgstr "<类型>" -#: diff.c:5355 +#: diff.c:5339 msgid "" "highlight whitespace errors in the 'context', 'old' or 'new' lines in the " "diff" msgstr "对于差异中的上下文、旧的和新的行，加亮显示错误的空白字符" -#: diff.c:5358 +#: diff.c:5342 msgid "" "do not munge pathnames and use NULs as output field terminators in --raw or " "--numstat" @@ -2760,334 +3162,353 @@ msgstr "" "在 --raw 或者 --numstat 中，不对路径字符转码并使用 NUL 字符做为输出字段的分隔" "符" -#: diff.c:5361 diff.c:5364 diff.c:5367 diff.c:5473 +#: diff.c:5345 diff.c:5348 diff.c:5351 diff.c:5457 msgid "" msgstr "<前缀>" -#: diff.c:5362 +#: diff.c:5346 msgid "show the given source prefix instead of \"a/\"" msgstr "显示给定的源前缀取代 \"a/\"" -#: diff.c:5365 +#: diff.c:5349 msgid "show the given destination prefix instead of \"b/\"" msgstr "显示给定的目标前缀取代 \"b/\"" -#: diff.c:5368 +#: diff.c:5352 msgid "prepend an additional prefix to every line of output" msgstr "输出的每一行附加前缀" -#: diff.c:5371 +#: diff.c:5355 msgid "do not show any source or destination prefix" msgstr "不显示任何源和目标前缀" -#: diff.c:5374 +#: diff.c:5358 msgid "show context between diff hunks up to the specified number of lines" msgstr "显示指定行数的差异块间的上下文" -#: diff.c:5378 diff.c:5383 diff.c:5388 +#: diff.c:5362 diff.c:5367 diff.c:5372 msgid "" msgstr "<字符>" -#: diff.c:5379 +#: diff.c:5363 msgid "specify the character to indicate a new line instead of '+'" msgstr "指定一个字符取代 '+' 来表示新的一行" -#: diff.c:5384 +#: diff.c:5368 msgid "specify the character to indicate an old line instead of '-'" msgstr "指定一个字符取代 '-' 来表示旧的一行" -#: diff.c:5389 +#: diff.c:5373 msgid "specify the character to indicate a context instead of ' '" msgstr "指定一个字符取代 ' ' 来表示一行上下文" -#: diff.c:5392 +#: diff.c:5376 msgid "Diff rename options" msgstr "差异重命名选项" -#: diff.c:5393 +#: diff.c:5377 msgid "[/]" msgstr "[/]" -#: diff.c:5394 +#: diff.c:5378 msgid "break complete rewrite changes into pairs of delete and create" msgstr "将完全重写的变更打破为成对的删除和创建" -#: diff.c:5398 +#: diff.c:5382 msgid "detect renames" msgstr "检测重命名" -#: diff.c:5402 +#: diff.c:5386 msgid "omit the preimage for deletes" msgstr "省略删除操作的差异输出" -#: diff.c:5405 +#: diff.c:5389 msgid "detect copies" msgstr "检测拷贝" -#: diff.c:5409 +#: diff.c:5393 msgid "use unmodified files as source to find copies" msgstr "使用未修改的文件做为发现拷贝的源" -#: diff.c:5411 +#: diff.c:5395 msgid "disable rename detection" msgstr "禁用重命名探测" -#: diff.c:5414 +#: diff.c:5398 msgid "use empty blobs as rename source" msgstr "使用空的数据对象做为重命名的源" -#: diff.c:5416 +#: diff.c:5400 msgid "continue listing the history of a file beyond renames" msgstr "继续列出文件重命名以外的历史记录" -#: diff.c:5419 +#: diff.c:5403 msgid "" "prevent rename/copy detection if the number of rename/copy targets exceeds " "given limit" msgstr "如果重命名/拷贝目标超过给定的限制，禁止重命名/拷贝检测" -#: diff.c:5421 +#: diff.c:5405 msgid "Diff algorithm options" msgstr "差异算法选项" -#: diff.c:5423 +#: diff.c:5407 msgid "produce the smallest possible diff" msgstr "生成尽可能小的差异" -#: diff.c:5426 +#: diff.c:5410 msgid "ignore whitespace when comparing lines" msgstr "行比较时忽略空白字符" -#: diff.c:5429 +#: diff.c:5413 msgid "ignore changes in amount of whitespace" msgstr "忽略空白字符的变更" -#: diff.c:5432 +#: diff.c:5416 msgid "ignore changes in whitespace at EOL" msgstr "忽略行尾的空白字符变更" -#: diff.c:5435 +#: diff.c:5419 msgid "ignore carrier-return at the end of line" msgstr "忽略行尾的回车符（CR）" -#: diff.c:5438 +#: diff.c:5422 msgid "ignore changes whose lines are all blank" msgstr "忽略整行都是空白的变更" -#: diff.c:5441 +#: diff.c:5425 msgid "heuristic to shift diff hunk boundaries for easy reading" msgstr "启发式转换差异边界以便阅读" -#: diff.c:5444 +#: diff.c:5428 msgid "generate diff using the \"patience diff\" algorithm" msgstr "使用 \"patience diff\" 算法生成差异" -#: diff.c:5448 +#: diff.c:5432 msgid "generate diff using the \"histogram diff\" algorithm" msgstr "使用 \"histogram diff\" 算法生成差异" -#: diff.c:5450 +#: diff.c:5434 msgid "" msgstr "<算法>" -#: diff.c:5451 +#: diff.c:5435 msgid "choose a diff algorithm" msgstr "选择一个差异算法" -#: diff.c:5453 +#: diff.c:5437 msgid "" msgstr "<文本>" -#: diff.c:5454 +#: diff.c:5438 msgid "generate diff using the \"anchored diff\" algorithm" msgstr "使用 \"anchored diff\" 算法生成差异" -#: diff.c:5456 diff.c:5465 diff.c:5468 +#: diff.c:5440 diff.c:5449 diff.c:5452 msgid "" msgstr "<模式>" -#: diff.c:5457 +#: diff.c:5441 msgid "show word diff, using to delimit changed words" msgstr "显示单词差异，使用 <模式> 分隔变更的单词" -#: diff.c:5459 diff.c:5462 diff.c:5507 +#: diff.c:5443 diff.c:5446 diff.c:5491 msgid "" msgstr "<正则>" -#: diff.c:5460 +#: diff.c:5444 msgid "use to decide what a word is" msgstr "使用 <正则表达式> 确定何为一个词" -#: diff.c:5463 +#: diff.c:5447 msgid "equivalent to --word-diff=color --word-diff-regex=" msgstr "相当于 --word-diff=color --word-diff-regex=<正则>" -#: diff.c:5466 +#: diff.c:5450 msgid "moved lines of code are colored differently" msgstr "移动的代码行用不同方式着色" -#: diff.c:5469 +#: diff.c:5453 msgid "how white spaces are ignored in --color-moved" msgstr "在 --color-moved 下如何忽略空白字符" -#: diff.c:5472 +#: diff.c:5456 msgid "Other diff options" msgstr "其它差异选项" -#: diff.c:5474 +#: diff.c:5458 msgid "when run from subdir, exclude changes outside and show relative paths" msgstr "当从子目录运行，排除目录之外的变更并显示相对路径" -#: diff.c:5478 +#: diff.c:5462 msgid "treat all files as text" msgstr "把所有文件当做文本处理" -#: diff.c:5480 +#: diff.c:5464 msgid "swap two inputs, reverse the diff" msgstr "交换两个输入，反转差异" -#: diff.c:5482 +#: diff.c:5466 msgid "exit with 1 if there were differences, 0 otherwise" msgstr "有差异时退出码为 1，否则为 0" -#: diff.c:5484 +#: diff.c:5468 msgid "disable all output of the program" msgstr "禁用本程序的所有输出" -#: diff.c:5486 +#: diff.c:5470 msgid "allow an external diff helper to be executed" msgstr "允许执行一个外置的差异助手" -#: diff.c:5488 +#: diff.c:5472 msgid "run external text conversion filters when comparing binary files" msgstr "当比较二进制文件时，运行外部的文本转换过滤器" -#: diff.c:5490 +#: diff.c:5474 msgid "" msgstr "<何时>" -#: diff.c:5491 +#: diff.c:5475 msgid "ignore changes to submodules in the diff generation" msgstr "在生成差异时，忽略子模组的更改" -#: diff.c:5494 +#: diff.c:5478 msgid "" msgstr "<格式>" -#: diff.c:5495 +#: diff.c:5479 msgid "specify how differences in submodules are shown" msgstr "指定子模组的差异如何显示" -#: diff.c:5499 +#: diff.c:5483 msgid "hide 'git add -N' entries from the index" msgstr "隐藏索引中 'git add -N' 条目" -#: diff.c:5502 +#: diff.c:5486 msgid "treat 'git add -N' entries as real in the index" msgstr "将索引中 'git add -N' 条目当做真实的" -#: diff.c:5504 +#: diff.c:5488 msgid "" msgstr "<字符串>" -#: diff.c:5505 +#: diff.c:5489 msgid "" "look for differences that change the number of occurrences of the specified " "string" msgstr "查找改变了指定字符串出现次数的差异" -#: diff.c:5508 +#: diff.c:5492 msgid "" "look for differences that change the number of occurrences of the specified " "regex" msgstr "查找改变指定正则匹配出现次数的差异" -#: diff.c:5511 +#: diff.c:5495 msgid "show all changes in the changeset with -S or -G" msgstr "显示使用 -S 或 -G 的变更集的所有变更" -#: diff.c:5514 +#: diff.c:5498 msgid "treat in -S as extended POSIX regular expression" msgstr "将 -S 的 当做扩展的 POSIX 正则表达式" -#: diff.c:5517 +#: diff.c:5501 msgid "control the order in which files appear in the output" msgstr "控制输出中的文件显示顺序" -#: diff.c:5518 +#: diff.c:5502 msgid "" msgstr "<对象 ID>" -#: diff.c:5519 +#: diff.c:5503 msgid "" "look for differences that change the number of occurrences of the specified " "object" msgstr "查找改变指定对象出现次数的差异" -#: diff.c:5521 +#: diff.c:5505 msgid "[(A|C|D|M|R|T|U|X|B)...[*]]" msgstr "[(A|C|D|M|R|T|U|X|B)...[*]]" -#: diff.c:5522 +#: diff.c:5506 msgid "select files by diff type" msgstr "通过差异类型选择文件" -#: diff.c:5524 +#: diff.c:5508 msgid "" msgstr "<文件>" -#: diff.c:5525 +#: diff.c:5509 msgid "Output to a specific file" msgstr "输出到一个指定的文件" -#: diff.c:6180 +#: diff.c:6164 msgid "inexact rename detection was skipped due to too many files." msgstr "因为文件太多，略过不严格的重命名检查。" -#: diff.c:6183 +#: diff.c:6167 msgid "only found copies from modified paths due to too many files." msgstr "因为文件太多，只在修改的路径中查找拷贝。" -#: diff.c:6186 +#: diff.c:6170 #, c-format msgid "" "you may want to set your %s variable to at least %d and retry the command." msgstr "您可能想要将变量 %s 设置为至少 %d 并再次执行此命令。" -#: dir.c:549 +#: dir.c:554 #, c-format msgid "pathspec '%s' did not match any file(s) known to git" msgstr "路径规格 '%s' 未匹配任何 git 已知文件" -#: dir.c:938 +#: dir.c:664 +#, c-format +msgid "unrecognized pattern: '%s'" +msgstr "未识别的模式：'%s'" + +#: dir.c:682 dir.c:696 +#, c-format +msgid "unrecognized negative pattern: '%s'" +msgstr "未识别的反向模式：'%s'" + +#: dir.c:714 +#, c-format +msgid "your sparse-checkout file may have issues: pattern '%s' is repeated" +msgstr "您的 sparse-checkout 文件可能有问题：重复的模式 '%s'" + +#: dir.c:724 +msgid "disabling cone pattern matching" +msgstr "禁止 cone 模式匹配" + +#: dir.c:1101 #, c-format msgid "cannot use %s as an exclude file" msgstr "不能将 %s 用作排除文件" -#: dir.c:1877 +#: dir.c:2078 #, c-format msgid "could not open directory '%s'" msgstr "不能打开目录 '%s'" -#: dir.c:2128 +#: dir.c:2415 msgid "failed to get kernel name and information" msgstr "无法获得内核名称和信息" -#: dir.c:2252 +#: dir.c:2539 msgid "untracked cache is disabled on this system or location" msgstr "缓存未跟踪文件在本系统或位置中被禁用" -#: dir.c:3056 +#: dir.c:3343 #, c-format msgid "index file corrupt in repo %s" msgstr "仓库 %s 中的索引文件损坏" -#: dir.c:3101 dir.c:3106 +#: dir.c:3388 dir.c:3393 #, c-format msgid "could not create directories for %s" msgstr "不能为 %s 创建目录" -#: dir.c:3135 +#: dir.c:3422 #, c-format msgid "could not migrate git directory from '%s' to '%s'" msgstr "不能从 '%s' 迁移 git 目录到 '%s'" @@ -3106,12 +3527,12 @@ msgstr "过滤内容" msgid "could not stat file '%s'" msgstr "不能对文件 '%s' 调用 stat" -#: environment.c:148 +#: environment.c:149 #, c-format msgid "bad git namespace path \"%s\"" msgstr "错误的 git 名字空间路径 \"%s\"" -#: environment.c:330 +#: environment.c:331 #, c-format msgid "could not set GIT_DIR to '%s'" msgstr "不能设置 GIT_DIR 为 '%s'" @@ -3146,32 +3567,32 @@ msgstr "无法写到远程" msgid "--stateless-rpc requires multi_ack_detailed" msgstr "--stateless-rpc 需要 multi_ack_detailed" -#: fetch-pack.c:356 fetch-pack.c:1280 +#: fetch-pack.c:356 fetch-pack.c:1340 #, c-format msgid "invalid shallow line: %s" msgstr "无效的 shallow 信息：%s" -#: fetch-pack.c:362 fetch-pack.c:1286 +#: fetch-pack.c:362 fetch-pack.c:1346 #, c-format msgid "invalid unshallow line: %s" msgstr "无效的 unshallow 信息：%s" -#: fetch-pack.c:364 fetch-pack.c:1288 +#: fetch-pack.c:364 fetch-pack.c:1348 #, c-format msgid "object not found: %s" msgstr "对象未找到：%s" -#: fetch-pack.c:367 fetch-pack.c:1291 +#: fetch-pack.c:367 fetch-pack.c:1351 #, c-format msgid "error in object: %s" msgstr "对象中出错：%s" -#: fetch-pack.c:369 fetch-pack.c:1293 +#: fetch-pack.c:369 fetch-pack.c:1353 #, c-format msgid "no shallow found: %s" msgstr "未发现 shallow：%s" -#: fetch-pack.c:372 fetch-pack.c:1297 +#: fetch-pack.c:372 fetch-pack.c:1357 #, c-format msgid "expected shallow/unshallow, got %s" msgstr "应为 shallow/unshallow，却得到 %s" @@ -3190,7 +3611,7 @@ msgstr "无效提交 %s" msgid "giving up" msgstr "放弃" -#: fetch-pack.c:475 progress.c:312 +#: fetch-pack.c:475 progress.c:323 msgid "done" msgstr "完成" @@ -3204,162 +3625,162 @@ msgstr "得到 %s (%d) %s" msgid "Marking %s as complete" msgstr "标记 %s 为完成" -#: fetch-pack.c:742 +#: fetch-pack.c:754 #, c-format msgid "already have %s (%s)" msgstr "已经有 %s（%s）" -#: fetch-pack.c:781 +#: fetch-pack.c:818 msgid "fetch-pack: unable to fork off sideband demultiplexer" msgstr "fetch-pack：无法派生 sideband 多路输出" -#: fetch-pack.c:789 +#: fetch-pack.c:826 msgid "protocol error: bad pack header" msgstr "协议错误：坏的包头" -#: fetch-pack.c:857 +#: fetch-pack.c:900 #, c-format msgid "fetch-pack: unable to fork off %s" msgstr "fetch-pack：无法派生进程 %s" -#: fetch-pack.c:873 +#: fetch-pack.c:916 #, c-format msgid "%s failed" msgstr "%s 失败" -#: fetch-pack.c:875 +#: fetch-pack.c:918 msgid "error in sideband demultiplexer" msgstr "sideband 多路输出出错" -#: fetch-pack.c:907 +#: fetch-pack.c:965 #, c-format msgid "Server version is %.*s" msgstr "服务器版本 %.*s" -#: fetch-pack.c:912 fetch-pack.c:918 fetch-pack.c:921 fetch-pack.c:927 -#: fetch-pack.c:931 fetch-pack.c:935 fetch-pack.c:939 fetch-pack.c:943 -#: fetch-pack.c:947 fetch-pack.c:951 fetch-pack.c:955 fetch-pack.c:959 -#: fetch-pack.c:965 fetch-pack.c:971 fetch-pack.c:976 fetch-pack.c:981 +#: fetch-pack.c:970 fetch-pack.c:976 fetch-pack.c:979 fetch-pack.c:985 +#: fetch-pack.c:989 fetch-pack.c:993 fetch-pack.c:997 fetch-pack.c:1001 +#: fetch-pack.c:1005 fetch-pack.c:1009 fetch-pack.c:1013 fetch-pack.c:1017 +#: fetch-pack.c:1023 fetch-pack.c:1029 fetch-pack.c:1034 fetch-pack.c:1039 #, c-format msgid "Server supports %s" msgstr "服务器支持 %s" -#: fetch-pack.c:914 +#: fetch-pack.c:972 msgid "Server does not support shallow clients" msgstr "服务器不支持 shalllow 客户端" -#: fetch-pack.c:974 +#: fetch-pack.c:1032 msgid "Server does not support --shallow-since" msgstr "服务器不支持 --shallow-since" -#: fetch-pack.c:979 +#: fetch-pack.c:1037 msgid "Server does not support --shallow-exclude" msgstr "服务器不支持 --shallow-exclude" -#: fetch-pack.c:983 +#: fetch-pack.c:1041 msgid "Server does not support --deepen" msgstr "服务器不支持 --deepen" -#: fetch-pack.c:1000 +#: fetch-pack.c:1058 msgid "no common commits" msgstr "没有共同的提交" -#: fetch-pack.c:1012 fetch-pack.c:1468 +#: fetch-pack.c:1070 fetch-pack.c:1536 msgid "git fetch-pack: fetch failed." msgstr "git fetch-pack：获取失败。" -#: fetch-pack.c:1150 +#: fetch-pack.c:1209 msgid "Server does not support shallow requests" msgstr "服务器不支持 shalllow 请求" -#: fetch-pack.c:1157 +#: fetch-pack.c:1216 msgid "Server supports filter" msgstr "服务器支持 filter" -#: fetch-pack.c:1180 +#: fetch-pack.c:1239 msgid "unable to write request to remote" msgstr "无法将请求写到远程" -#: fetch-pack.c:1198 +#: fetch-pack.c:1257 #, c-format msgid "error reading section header '%s'" msgstr "读取节标题 '%s' 出错" -#: fetch-pack.c:1204 +#: fetch-pack.c:1263 #, c-format msgid "expected '%s', received '%s'" msgstr "预期 '%s'，得到 '%s'" -#: fetch-pack.c:1243 +#: fetch-pack.c:1303 #, c-format msgid "unexpected acknowledgment line: '%s'" msgstr "意外的确认行：'%s'" -#: fetch-pack.c:1248 +#: fetch-pack.c:1308 #, c-format msgid "error processing acks: %d" msgstr "处理 ack 出错：%d" -#: fetch-pack.c:1258 +#: fetch-pack.c:1318 msgid "expected packfile to be sent after 'ready'" msgstr "预期在 'ready' 之后发送 packfile" -#: fetch-pack.c:1260 +#: fetch-pack.c:1320 msgid "expected no other sections to be sent after no 'ready'" msgstr "在没有 'ready' 不应该发送其它小节" -#: fetch-pack.c:1302 +#: fetch-pack.c:1362 #, c-format msgid "error processing shallow info: %d" msgstr "处理浅克隆信息出错：%d" -#: fetch-pack.c:1349 +#: fetch-pack.c:1409 #, c-format msgid "expected wanted-ref, got '%s'" msgstr "预期 wanted-ref，得到 '%s'" -#: fetch-pack.c:1354 +#: fetch-pack.c:1414 #, c-format msgid "unexpected wanted-ref: '%s'" msgstr "意外的 wanted-ref：'%s'" -#: fetch-pack.c:1359 +#: fetch-pack.c:1419 #, c-format msgid "error processing wanted refs: %d" msgstr "处理要获取的引用出错：%d" -#: fetch-pack.c:1693 +#: fetch-pack.c:1762 msgid "no matching remote head" msgstr "没有匹配的远程分支" -#: fetch-pack.c:1716 builtin/clone.c:685 +#: fetch-pack.c:1785 builtin/clone.c:688 msgid "remote did not send all necessary objects" msgstr "远程没有发送所有必需的对象" -#: fetch-pack.c:1743 +#: fetch-pack.c:1812 #, c-format msgid "no such remote ref %s" msgstr "没有这样的远程引用 %s" -#: fetch-pack.c:1746 +#: fetch-pack.c:1815 #, c-format msgid "Server does not allow request for unadvertised object %s" msgstr "服务器不允许请求未公开的对象 %s" -#: gpg-interface.c:321 -msgid "gpg failed to sign the data" -msgstr "gpg 无法为数据签名" - -#: gpg-interface.c:347 +#: gpg-interface.c:223 msgid "could not create temporary file" msgstr "不能创建临时文件" -#: gpg-interface.c:350 +#: gpg-interface.c:226 #, c-format msgid "failed writing detached signature to '%s'" msgstr "无法将分离式签名写入 '%s'" -#: graph.c:97 +#: gpg-interface.c:390 +msgid "gpg failed to sign the data" +msgstr "gpg 无法为数据签名" + +#: graph.c:98 #, c-format msgid "ignore invalid color '%.*s' in log.graphColors" msgstr "忽略 log.graphColors 中无效的颜色 '%.*s'" @@ -3369,14 +3790,15 @@ msgid "" "given pattern contains NULL byte (via -f ). This is only supported " "with -P under PCRE v2" msgstr "" -"给定的模式包含 NULL 字符（通过 -f <文件> 参数）。只有 PCRE v2 下的 -P 支持此功能" +"给定的模式包含 NULL 字符（通过 -f <文件> 参数）。只有 PCRE v2 下的 -P 支持此" +"功能" #: grep.c:2124 #, c-format msgid "'%s': unable to read %s" msgstr "'%s'：无法读取 %s" -#: grep.c:2141 setup.c:165 builtin/clone.c:408 builtin/diff.c:82 +#: grep.c:2141 setup.c:165 builtin/clone.c:411 builtin/diff.c:82 #: builtin/rm.c:135 #, c-format msgid "failed to stat '%s'" @@ -3432,7 +3854,7 @@ msgid "Low-level Commands / Interrogators" msgstr "低级命令/询问者" #: help.c:37 -msgid "Low-level Commands / Synching Repositories" +msgid "Low-level Commands / Syncing Repositories" msgstr "低级命令/同步仓库" #: help.c:38 @@ -3596,7 +4018,7 @@ msgstr "不允许空的姓名（对于 <%s>）" msgid "name consists only of disallowed characters: %s" msgstr "姓名中仅包含禁用字符：%s" -#: ident.c:436 builtin/commit.c:611 +#: ident.c:436 builtin/commit.c:631 #, c-format msgid "invalid date format: %s" msgstr "无效的日期格式：%s" @@ -3680,7 +4102,7 @@ msgid "failed to read the cache" msgstr "读取缓存失败" #: merge.c:107 rerere.c:720 builtin/am.c:1874 builtin/am.c:1908 -#: builtin/checkout.c:537 builtin/checkout.c:796 builtin/clone.c:785 +#: builtin/checkout.c:539 builtin/checkout.c:798 builtin/clone.c:809 #: builtin/stash.c:264 msgid "unable to write new index file" msgstr "无法写新的索引文件" @@ -3866,7 +4288,7 @@ msgstr "重命名" msgid "renamed" msgstr "重命名" -#: merge-recursive.c:1614 merge-recursive.c:2472 merge-recursive.c:3117 +#: merge-recursive.c:1614 merge-recursive.c:2530 merge-recursive.c:3175 #, c-format msgid "Refusing to lose dirty file at %s" msgstr "拒绝丢失脏文件 '%s'" @@ -3911,7 +4333,7 @@ msgstr "" "冲突（重命名/重命名）：在 %3$s 中重命名 %1$s->%2$s，在 %6$s 中重命名 %4$s->" "%5$s" -#: merge-recursive.c:2056 +#: merge-recursive.c:2114 #, c-format msgid "" "CONFLICT (directory rename split): Unclear where to place %s because " @@ -3921,7 +4343,7 @@ msgstr "" "冲突（分割的目录重命名）：不清楚 %s 应该放在哪里，因为目录 %s 被重命名到多个" "其它目录，没有目录包含大部分文件。" -#: merge-recursive.c:2088 +#: merge-recursive.c:2146 #, c-format msgid "" "CONFLICT (implicit dir rename): Existing file/dir at %s in the way of " @@ -3930,7 +4352,7 @@ msgstr "" "冲突（隐式目录重命名）：处于隐式目录重命名的现存文件/目录 %s，将以下路径放" "在：%s。" -#: merge-recursive.c:2098 +#: merge-recursive.c:2156 #, c-format msgid "" "CONFLICT (implicit dir rename): Cannot map more than one path to %s; " @@ -3939,7 +4361,7 @@ msgstr "" "冲突（隐式目录重命名）：无法映射一个以上路径到 %s，隐式目录重命名尝试将这些路" "径放置于此：%s" -#: merge-recursive.c:2190 +#: merge-recursive.c:2248 #, c-format msgid "" "CONFLICT (rename/rename): Rename directory %s->%s in %s. Rename directory %s-" @@ -3948,59 +4370,59 @@ msgstr "" "冲突（重命名/重命名）：在 %3$s 中重命名目录 %1$s->%2$s，在 %6$s 中重命名目录 " "%4$s->%5$s" -#: merge-recursive.c:2435 +#: merge-recursive.c:2493 #, c-format msgid "" "WARNING: Avoiding applying %s -> %s rename to %s, because %s itself was " "renamed." msgstr "警告：避免应用 %s -> %s 的重命名到 %s，因为 %s 本身已被重命名。" -#: merge-recursive.c:2961 +#: merge-recursive.c:3019 #, c-format msgid "cannot read object %s" msgstr "不能读取对象 %s" -#: merge-recursive.c:2964 +#: merge-recursive.c:3022 #, c-format msgid "object %s is not a blob" msgstr "对象 %s 不是一个数据对象" -#: merge-recursive.c:3028 +#: merge-recursive.c:3086 msgid "modify" msgstr "修改" -#: merge-recursive.c:3028 +#: merge-recursive.c:3086 msgid "modified" msgstr "修改" -#: merge-recursive.c:3040 +#: merge-recursive.c:3098 msgid "content" msgstr "内容" -#: merge-recursive.c:3044 +#: merge-recursive.c:3102 msgid "add/add" msgstr "添加/添加" -#: merge-recursive.c:3067 +#: merge-recursive.c:3125 #, c-format msgid "Skipped %s (merged same as existing)" msgstr "略过 %s（已经做过相同合并）" -#: merge-recursive.c:3089 git-submodule.sh:937 +#: merge-recursive.c:3147 git-submodule.sh:993 msgid "submodule" msgstr "子模组" -#: merge-recursive.c:3090 +#: merge-recursive.c:3148 #, c-format msgid "CONFLICT (%s): Merge conflict in %s" msgstr "冲突（%s）：合并冲突于 %s" -#: merge-recursive.c:3120 +#: merge-recursive.c:3178 #, c-format msgid "Adding as %s instead" msgstr "而是以 %s 为名添加" -#: merge-recursive.c:3203 +#: merge-recursive.c:3261 #, c-format msgid "" "Path updated: %s added in %s inside a directory that was renamed in %s; " @@ -4008,7 +4430,7 @@ msgid "" msgstr "" "路径已更新：%s 添加到 %s，位于一个被重命名到 %s 的目录中，将其移动到 %s。" -#: merge-recursive.c:3206 +#: merge-recursive.c:3264 #, c-format msgid "" "CONFLICT (file location): %s added in %s inside a directory that was renamed " @@ -4017,7 +4439,7 @@ msgstr "" "冲突（文件位置）：%s 添加到 %s，位于一个被重命名为 %s 的目录中，建议将其移动" "到 %s。" -#: merge-recursive.c:3210 +#: merge-recursive.c:3268 #, c-format msgid "" "Path updated: %s renamed to %s in %s, inside a directory that was renamed in " @@ -4026,7 +4448,7 @@ msgstr "" "路径已更新：%1$s 重命名为 %3$s 中的 %2$s，而该目录被重命名到 %4$s 中，将其移" "动到 %5$s。" -#: merge-recursive.c:3213 +#: merge-recursive.c:3271 #, c-format msgid "" "CONFLICT (file location): %s renamed to %s in %s, inside a directory that " @@ -4035,59 +4457,59 @@ msgstr "" "冲突（文件位置）：%1$s 重命名为 %3$s 中的 %2$s，而该目录被重命名到 %4$s 中，" "建议将其移动到 %5$s。" -#: merge-recursive.c:3327 +#: merge-recursive.c:3385 #, c-format msgid "Removing %s" msgstr "删除 %s" -#: merge-recursive.c:3350 +#: merge-recursive.c:3408 msgid "file/directory" msgstr "文件/目录" -#: merge-recursive.c:3355 +#: merge-recursive.c:3413 msgid "directory/file" msgstr "目录/文件" -#: merge-recursive.c:3362 +#: merge-recursive.c:3420 #, c-format msgid "CONFLICT (%s): There is a directory with name %s in %s. Adding %s as %s" msgstr "冲突（%1$s）：在 %3$s 中有一个名为 %2$s 的目录。以 %5$s 为名添加 %4$s" -#: merge-recursive.c:3371 +#: merge-recursive.c:3429 #, c-format msgid "Adding %s" msgstr "添加 %s" -#: merge-recursive.c:3380 +#: merge-recursive.c:3438 #, c-format msgid "CONFLICT (add/add): Merge conflict in %s" msgstr "冲突（add/add）：合并冲突于 %s" -#: merge-recursive.c:3424 +#: merge-recursive.c:3482 msgid "Already up to date!" msgstr "已经是最新的！" -#: merge-recursive.c:3433 +#: merge-recursive.c:3491 #, c-format msgid "merging of trees %s and %s failed" msgstr "无法合并树 %s 和 %s" -#: merge-recursive.c:3537 +#: merge-recursive.c:3595 msgid "Merging:" msgstr "合并：" -#: merge-recursive.c:3550 +#: merge-recursive.c:3608 #, c-format msgid "found %u common ancestor:" msgid_plural "found %u common ancestors:" msgstr[0] "发现 %u 个共同祖先：" msgstr[1] "发现 %u 个共同祖先：" -#: merge-recursive.c:3600 +#: merge-recursive.c:3658 msgid "merge returned no commit" msgstr "合并未返回提交" -#: merge-recursive.c:3659 +#: merge-recursive.c:3717 #, c-format msgid "" "Your local changes to the following files would be overwritten by merge:\n" @@ -4096,12 +4518,12 @@ msgstr "" "您对下列文件的本地修改将被合并操作覆盖：\n" " %s" -#: merge-recursive.c:3756 +#: merge-recursive.c:3814 #, c-format msgid "Could not parse object '%s'" msgstr "不能解析对象 '%s'" -#: merge-recursive.c:3774 builtin/merge.c:694 builtin/merge.c:874 +#: merge-recursive.c:3832 builtin/merge.c:694 builtin/merge.c:874 msgid "Unable to write index." msgstr "不能写入索引。" @@ -4167,78 +4589,94 @@ msgstr "多包索引存储一个64位偏移，但是 off_t 太小" msgid "error preparing packfile from multi-pack-index" msgstr "从多包索引准备 packfile 出错" -#: midx.c:469 +#: midx.c:472 #, c-format msgid "failed to add packfile '%s'" msgstr "添加包文件 '%s' 失败" -#: midx.c:475 +#: midx.c:478 #, c-format msgid "failed to open pack-index '%s'" msgstr "打开包索引 '%s' 失败" -#: midx.c:535 +#: midx.c:538 #, c-format msgid "failed to locate object %d in packfile" msgstr "在包文件中定位对象 %d 失败" -#: midx.c:864 +#: midx.c:842 +msgid "Adding packfiles to multi-pack-index" +msgstr "添加包文件到多包索引" + +#: midx.c:875 #, c-format msgid "did not see pack-file %s to drop" msgstr "没有看到要丢弃的包文件 %s" -#: midx.c:1035 +#: midx.c:973 +msgid "Writing chunks to multi-pack-index" +msgstr "写入块到多包索引" + +#: midx.c:1052 #, c-format msgid "failed to clear multi-pack-index at %s" msgstr "清理位于 %s 的多包索引失败" -#: midx.c:1090 +#: midx.c:1108 msgid "Looking for referenced packfiles" msgstr "正在查找引用的包文件" -#: midx.c:1105 +#: midx.c:1123 #, c-format msgid "" "oid fanout out of order: fanout[%d] = % > % = fanout[%d]" msgstr "对象 ID 扇出无序：fanout[%d] = % > % = fanout[%d]" -#: midx.c:1109 -msgid "Verifying OID order in MIDX" -msgstr "正在校验 MIDX 中的对象 ID 顺序" +#: midx.c:1128 +msgid "Verifying OID order in multi-pack-index" +msgstr "校验多包索引中的 OID 顺序" -#: midx.c:1118 +#: midx.c:1137 #, c-format msgid "oid lookup out of order: oid[%d] = %s >= %s = oid[%d]" msgstr "对象 ID 查询无序：oid[%d] = %s >= %s = oid[%d]" -#: midx.c:1137 +#: midx.c:1157 msgid "Sorting objects by packfile" msgstr "通过包文件为对象排序" -#: midx.c:1143 +#: midx.c:1164 msgid "Verifying object offsets" msgstr "校验对象偏移" -#: midx.c:1159 +#: midx.c:1180 #, c-format msgid "failed to load pack entry for oid[%d] = %s" msgstr "为 oid[%d] = %s 加载包条目失败" -#: midx.c:1165 +#: midx.c:1186 #, c-format msgid "failed to load pack-index for packfile %s" msgstr "为包文件 %s 加载包索引失败" -#: midx.c:1174 +#: midx.c:1195 #, c-format msgid "incorrect object offset for oid[%d] = %s: % != %" msgstr "oid[%d] = %s 错误的对象偏移：% != %" -#: midx.c:1349 +#: midx.c:1220 +msgid "Counting referenced objects" +msgstr "正在对引用对象计数" + +#: midx.c:1230 +msgid "Finding and deleting unreferenced packfiles" +msgstr "正在查找和删除未引用的包文件" + +#: midx.c:1388 msgid "could not start pack-objects" msgstr "不能开始 pack-objects" -#: midx.c:1368 +#: midx.c:1407 msgid "could not finish pack-objects" msgstr "不能结束 pack-objects" @@ -4325,12 +4763,12 @@ msgstr "哈希值与 %s 不匹配" msgid "offset before end of packfile (broken .idx?)" msgstr "偏移量在包文件结束之前（损坏的 .idx？）" -#: packfile.c:1887 +#: packfile.c:1888 #, c-format msgid "offset before start of pack index for %s (corrupt index?)" msgstr "偏移量在 %s 的包索引开始之前（损坏的索引？）" -#: packfile.c:1891 +#: packfile.c:1892 #, c-format msgid "offset beyond end of pack index for %s (truncated index?)" msgstr "偏移量越过了 %s 的包索引的结尾（被截断的索引？）" @@ -4442,82 +4880,87 @@ msgstr "选项 `%s' 期望 \"always\"、\"auto\" 或 \"never\"" msgid "malformed object name '%s'" msgstr "格式错误的对象名 '%s'" -#: path.c:897 +#: path.c:915 #, c-format msgid "Could not make %s writable by group" msgstr "不能设置 %s 为组可写" -#: pathspec.c:128 +#: pathspec.c:130 msgid "Escape character '\\' not allowed as last character in attr value" msgstr "转义字符 '\\' 不能作为属性值的最后一个字符" -#: pathspec.c:146 +#: pathspec.c:148 msgid "Only one 'attr:' specification is allowed." msgstr "只允许一个 'attr:' 规格。" -#: pathspec.c:149 +#: pathspec.c:151 msgid "attr spec must not be empty" msgstr "属性规格不能为空" -#: pathspec.c:192 +#: pathspec.c:194 #, c-format msgid "invalid attribute name %s" msgstr "无效的属性名 %s" -#: pathspec.c:257 +#: pathspec.c:259 msgid "global 'glob' and 'noglob' pathspec settings are incompatible" msgstr "全局的 'glob' 和 'noglob' 路径规格设置不兼容" -#: pathspec.c:264 +#: pathspec.c:266 msgid "" "global 'literal' pathspec setting is incompatible with all other global " "pathspec settings" msgstr "全局的 'literal' 路径规格设置和其它的全局路径规格设置不兼容" -#: pathspec.c:304 +#: pathspec.c:306 msgid "invalid parameter for pathspec magic 'prefix'" msgstr "路径规格包含无效的神奇前缀" -#: pathspec.c:325 +#: pathspec.c:327 #, c-format msgid "Invalid pathspec magic '%.*s' in '%s'" msgstr "在路径规格 '%3$s' 中无效的神奇前缀 '%2$.*1$s'" -#: pathspec.c:330 +#: pathspec.c:332 #, c-format msgid "Missing ')' at the end of pathspec magic in '%s'" msgstr "路径规格 '%s' 的神奇前缀结尾少了一个 ')'" -#: pathspec.c:368 +#: pathspec.c:370 #, c-format msgid "Unimplemented pathspec magic '%c' in '%s'" msgstr "路径规格 '%2$s' 中包含未实现的神奇前缀 '%1$c'" -#: pathspec.c:427 +#: pathspec.c:429 #, c-format msgid "%s: 'literal' and 'glob' are incompatible" msgstr "%s：'literal' 和 'glob' 不兼容" -#: pathspec.c:440 +#: pathspec.c:442 #, c-format msgid "%s: '%s' is outside repository" msgstr "%s：'%s' 在仓库之外" -#: pathspec.c:514 +#: pathspec.c:516 #, c-format msgid "'%s' (mnemonic: '%c')" msgstr "'%s'（助记符：'%c'）" -#: pathspec.c:524 +#: pathspec.c:526 #, c-format msgid "%s: pathspec magic not supported by this command: %s" msgstr "%s：路径规格神奇前缀不被此命令支持：%s" -#: pathspec.c:591 +#: pathspec.c:593 #, c-format msgid "pathspec '%s' is beyond a symbolic link" msgstr "路径规格 '%s' 位于符号链接中" +#: pathspec.c:638 +#, c-format +msgid "line is badly quoted: %s" +msgstr "行被错误地引用：%s" + #: pkt-line.c:92 msgid "unable to write flush packet" msgstr "无法写 flush 包" @@ -4578,42 +5021,42 @@ msgstr "正在刷新索引" msgid "unable to create threaded lstat: %s" msgstr "无法创建线程 lstat：%s" -#: pretty.c:966 +#: pretty.c:981 msgid "unable to parse --pretty format" msgstr "不能解析 --pretty 格式" -#: promisor-remote.c:25 +#: promisor-remote.c:23 msgid "Remote with no URL" msgstr "远程未设置 URL" -#: promisor-remote.c:61 +#: promisor-remote.c:58 #, c-format msgid "promisor remote name cannot begin with '/': %s" msgstr "promisor 远程名称不能以 '/' 开始：%s" -#: range-diff.c:71 +#: range-diff.c:75 msgid "could not start `log`" msgstr "不能启动 `log`" -#: range-diff.c:73 +#: range-diff.c:77 msgid "could not read `log` output" msgstr "不能读取 `log` 的输出" -#: range-diff.c:92 sequencer.c:4985 +#: range-diff.c:96 sequencer.c:5163 #, c-format msgid "could not parse commit '%s'" msgstr "不能解析提交 '%s'" -#: range-diff.c:118 +#: range-diff.c:122 #, c-format msgid "could not parse git header '%.*s'" msgstr "无法解析 git 头 '%.*s'" -#: range-diff.c:275 +#: range-diff.c:285 msgid "failed to generate diff" msgstr "生成 diff 失败" -#: range-diff.c:507 range-diff.c:509 +#: range-diff.c:518 range-diff.c:520 #, c-format msgid "could not parse log for '%s'" msgstr "不能解析 '%s' 的日志" @@ -4652,16 +5095,16 @@ msgstr "无法在索引中添加 '%s'" msgid "unable to stat '%s'" msgstr "无法对 %s 执行 stat" -#: read-cache.c:1314 +#: read-cache.c:1325 #, c-format msgid "'%s' appears as both a file and as a directory" msgstr "'%s' 看起来既是文件又是目录" -#: read-cache.c:1520 +#: read-cache.c:1531 msgid "Refresh index" msgstr "刷新索引" -#: read-cache.c:1635 +#: read-cache.c:1646 #, c-format msgid "" "index.version set, but the value is invalid.\n" @@ -4670,7 +5113,7 @@ msgstr "" "设置了 index.version，但是取值无效。\n" "使用版本 %i" -#: read-cache.c:1645 +#: read-cache.c:1656 #, c-format msgid "" "GIT_INDEX_VERSION set, but the value is invalid.\n" @@ -4679,139 +5122,139 @@ msgstr "" "设置了 GIT_INDEX_VERSION，但是取值无效。\n" "使用版本 %i" -#: read-cache.c:1701 +#: read-cache.c:1712 #, c-format msgid "bad signature 0x%08x" msgstr "坏的签名 0x%08x" -#: read-cache.c:1704 +#: read-cache.c:1715 #, c-format msgid "bad index version %d" msgstr "坏的索引版本 %d" -#: read-cache.c:1713 +#: read-cache.c:1724 msgid "bad index file sha1 signature" msgstr "坏的索引文件 sha1 签名" -#: read-cache.c:1743 +#: read-cache.c:1754 #, c-format msgid "index uses %.4s extension, which we do not understand" msgstr "索引使用不被支持的 %.4s 扩展" # -#: read-cache.c:1745 +#: read-cache.c:1756 #, c-format msgid "ignoring %.4s extension" msgstr "忽略 %.4s 扩展" -#: read-cache.c:1782 +#: read-cache.c:1793 #, c-format msgid "unknown index entry format 0x%08x" msgstr "未知的索引条目格式 0x%08x" -#: read-cache.c:1798 +#: read-cache.c:1809 #, c-format msgid "malformed name field in the index, near path '%s'" msgstr "索引中靠近路径 '%s' 有错误的名称字段" -#: read-cache.c:1855 +#: read-cache.c:1866 msgid "unordered stage entries in index" msgstr "索引中有未排序的暂存条目" -#: read-cache.c:1858 +#: read-cache.c:1869 #, c-format msgid "multiple stage entries for merged file '%s'" msgstr "合并文件 '%s' 有多个暂存条目" -#: read-cache.c:1861 +#: read-cache.c:1872 #, c-format msgid "unordered stage entries for '%s'" msgstr "'%s' 的未排序暂存条目" -#: read-cache.c:1967 read-cache.c:2255 rerere.c:565 rerere.c:599 rerere.c:1111 -#: builtin/add.c:460 builtin/check-ignore.c:178 builtin/checkout.c:468 -#: builtin/checkout.c:652 builtin/clean.c:967 builtin/commit.c:347 +#: read-cache.c:1978 read-cache.c:2266 rerere.c:565 rerere.c:599 rerere.c:1111 +#: builtin/add.c:499 builtin/check-ignore.c:178 builtin/checkout.c:470 +#: builtin/checkout.c:654 builtin/clean.c:967 builtin/commit.c:367 #: builtin/diff-tree.c:120 builtin/grep.c:499 builtin/mv.c:145 -#: builtin/reset.c:245 builtin/rm.c:271 builtin/submodule--helper.c:330 +#: builtin/reset.c:246 builtin/rm.c:271 builtin/submodule--helper.c:332 msgid "index file corrupt" msgstr "索引文件损坏" -#: read-cache.c:2108 +#: read-cache.c:2119 #, c-format msgid "unable to create load_cache_entries thread: %s" msgstr "无法创建 load_cache_entries 线程：%s" -#: read-cache.c:2121 +#: read-cache.c:2132 #, c-format msgid "unable to join load_cache_entries thread: %s" msgstr "无法加入 load_cache_entries 线程：%s" -#: read-cache.c:2154 +#: read-cache.c:2165 #, c-format msgid "%s: index file open failed" msgstr "%s：打开索引文件失败" -#: read-cache.c:2158 +#: read-cache.c:2169 #, c-format msgid "%s: cannot stat the open index" msgstr "%s：不能对打开的索引执行 stat 操作" -#: read-cache.c:2162 +#: read-cache.c:2173 #, c-format msgid "%s: index file smaller than expected" msgstr "%s：索引文件比预期的小" -#: read-cache.c:2166 +#: read-cache.c:2177 #, c-format msgid "%s: unable to map index file" msgstr "%s：无法对索引文件执行 map 操作" -#: read-cache.c:2208 +#: read-cache.c:2219 #, c-format msgid "unable to create load_index_extensions thread: %s" msgstr "无法创建 load_index_extensions 线程：%s" -#: read-cache.c:2235 +#: read-cache.c:2246 #, c-format msgid "unable to join load_index_extensions thread: %s" msgstr "无法加入 load_index_extensions 线程：%s" -#: read-cache.c:2267 +#: read-cache.c:2278 #, c-format msgid "could not freshen shared index '%s'" msgstr "无法刷新共享索引 '%s'" -#: read-cache.c:2314 +#: read-cache.c:2325 #, c-format msgid "broken index, expect %s in %s, got %s" msgstr "损坏的索引，期望在 %2$s 中的 %1$s，得到 %3$s" -#: read-cache.c:3010 wrapper.c:622 builtin/merge.c:1119 +#: read-cache.c:3021 strbuf.c:1145 wrapper.c:622 builtin/merge.c:1119 #, c-format msgid "could not close '%s'" msgstr "不能关闭 '%s'" -#: read-cache.c:3113 sequencer.c:2296 sequencer.c:3917 +#: read-cache.c:3124 sequencer.c:2429 sequencer.c:4069 #, c-format msgid "could not stat '%s'" msgstr "不能对 '%s' 调用 stat" -#: read-cache.c:3126 +#: read-cache.c:3137 #, c-format msgid "unable to open git dir: %s" msgstr "不能打开 git 目录：%s" -#: read-cache.c:3138 +#: read-cache.c:3149 #, c-format msgid "unable to unlink: %s" msgstr "无法删除：%s" -#: read-cache.c:3163 +#: read-cache.c:3174 #, c-format msgid "cannot fix permission bits on '%s'" msgstr "不能修复 '%s' 的权限位" -#: read-cache.c:3312 +#: read-cache.c:3323 #, c-format msgid "%s: cannot drop to stage #0" msgstr "%s：不能落到暂存区 #0" @@ -4913,8 +5356,8 @@ msgstr "" msgid "Note that empty commits are commented out" msgstr "注意空提交已被注释掉" -#: rebase-interactive.c:105 rerere.c:485 rerere.c:692 sequencer.c:3388 -#: sequencer.c:3414 sequencer.c:5084 builtin/fsck.c:356 builtin/rebase.c:235 +#: rebase-interactive.c:105 rerere.c:485 rerere.c:692 sequencer.c:3536 +#: sequencer.c:3562 sequencer.c:5263 builtin/fsck.c:346 builtin/rebase.c:254 #, c-format msgid "could not write '%s'" msgstr "不能写入 '%s'" @@ -4984,14 +5427,15 @@ msgstr "引用 '%s' 已经存在" msgid "unexpected object ID when writing '%s'" msgstr "写入 '%s' 时意外的对象 ID" -#: refs.c:833 sequencer.c:403 sequencer.c:2647 sequencer.c:2851 -#: sequencer.c:2865 sequencer.c:3122 sequencer.c:5001 wrapper.c:620 +#: refs.c:833 sequencer.c:405 sequencer.c:2793 sequencer.c:2997 +#: sequencer.c:3011 sequencer.c:3269 sequencer.c:5179 strbuf.c:1142 +#: wrapper.c:620 #, c-format msgid "could not write to '%s'" msgstr "不能写入 '%s'" -#: refs.c:860 wrapper.c:188 wrapper.c:358 builtin/am.c:714 -#: builtin/rebase.c:1004 +#: refs.c:860 strbuf.c:1140 wrapper.c:188 wrapper.c:358 builtin/am.c:714 +#: builtin/rebase.c:1031 #, c-format msgid "could not open '%s' for writing" msgstr "无法打开 '%s' 进行写入" @@ -5647,8 +6091,8 @@ msgstr "不能删除 stray '%s'" msgid "Recorded preimage for '%s'" msgstr "为 '%s' 记录 preimage" -#: rerere.c:881 submodule.c:2023 builtin/log.c:1790 -#: builtin/submodule--helper.c:1418 builtin/submodule--helper.c:1428 +#: rerere.c:881 submodule.c:2067 builtin/log.c:1871 +#: builtin/submodule--helper.c:1436 builtin/submodule--helper.c:1448 #, c-format msgid "could not create directory '%s'" msgstr "不能创建目录 '%s'" @@ -5682,33 +6126,33 @@ msgstr "忘记 '%s' 的解决方案\n" msgid "unable to open rr-cache directory" msgstr "不能打开 rr-cache 目录" -#: revision.c:2509 +#: revision.c:2497 msgid "your current branch appears to be broken" msgstr "您的当前分支好像被损坏" -#: revision.c:2512 +#: revision.c:2500 #, c-format msgid "your current branch '%s' does not have any commits yet" msgstr "您的当前分支 '%s' 尚无任何提交" -#: revision.c:2720 +#: revision.c:2708 msgid "--first-parent is incompatible with --bisect" msgstr "--first-parent 与 --bisect 不兼容" -#: revision.c:2724 +#: revision.c:2712 msgid "-L does not yet support diff formats besides -p and -s" msgstr "-L 尚不支持 -p 和 -s 之外的差异格式" -#: run-command.c:763 +#: run-command.c:762 msgid "open /dev/null failed" msgstr "不能打开 /dev/null" -#: run-command.c:1269 +#: run-command.c:1268 #, c-format msgid "cannot create async thread: %s" msgstr "不能创建 async 线程：%s" -#: run-command.c:1333 +#: run-command.c:1332 #, c-format msgid "" "The '%s' hook was ignored because it's not set as executable.\n" @@ -5717,75 +6161,75 @@ msgstr "" "因为没有将钩子 '%s' 设置为可执行，钩子被忽略。您可以通过\n" "配置 `git config advice.ignoredHook false` 来关闭这条警告。" -#: send-pack.c:142 +#: send-pack.c:144 msgid "unexpected flush packet while reading remote unpack status" msgstr "读取远程解包状态时收到意外的 flush 包" -#: send-pack.c:144 +#: send-pack.c:146 #, c-format msgid "unable to parse remote unpack status: %s" msgstr "不能解析远程解包状态：%s" -#: send-pack.c:146 +#: send-pack.c:148 #, c-format msgid "remote unpack failed: %s" msgstr "远程解包失败：%s" -#: send-pack.c:307 +#: send-pack.c:309 msgid "failed to sign the push certificate" msgstr "为推送证书签名失败" -#: send-pack.c:421 +#: send-pack.c:423 msgid "the receiving end does not support --signed push" msgstr "接收端不支持签名推送" -#: send-pack.c:423 +#: send-pack.c:425 msgid "" "not sending a push certificate since the receiving end does not support --" "signed push" msgstr "未发送推送证书，因为接收端不支持签名推送" -#: send-pack.c:435 +#: send-pack.c:437 msgid "the receiving end does not support --atomic push" msgstr "接收端不支持原子推送" -#: send-pack.c:440 +#: send-pack.c:442 msgid "the receiving end does not support push options" msgstr "接收端不支持推送选项" -#: sequencer.c:187 +#: sequencer.c:189 #, c-format msgid "invalid commit message cleanup mode '%s'" msgstr "无效的提交信息清理模式 '%s'" -#: sequencer.c:292 +#: sequencer.c:294 #, c-format msgid "could not delete '%s'" msgstr "无法删除 '%s'" -#: sequencer.c:311 builtin/rebase.c:760 builtin/rebase.c:1676 builtin/rm.c:369 +#: sequencer.c:313 builtin/rebase.c:781 builtin/rebase.c:1706 builtin/rm.c:369 #, c-format msgid "could not remove '%s'" msgstr "无法删除 '%s'" -#: sequencer.c:321 +#: sequencer.c:323 msgid "revert" msgstr "还原" -#: sequencer.c:323 +#: sequencer.c:325 msgid "cherry-pick" msgstr "拣选" -#: sequencer.c:325 +#: sequencer.c:327 msgid "rebase -i" msgstr "rebase -i" -#: sequencer.c:327 +#: sequencer.c:329 #, c-format msgid "unknown action: %d" msgstr "未知动作：%d" -#: sequencer.c:385 +#: sequencer.c:387 msgid "" "after resolving the conflicts, mark the corrected paths\n" "with 'git add ' or 'git rm '" @@ -5793,7 +6237,7 @@ msgstr "" "冲突解决完毕后，用 'git add <路径>' 或 'git rm <路径>'\n" "命令标记修正后的文件" -#: sequencer.c:388 +#: sequencer.c:390 msgid "" "after resolving the conflicts, mark the corrected paths\n" "with 'git add ' or 'git rm '\n" @@ -5802,44 +6246,44 @@ msgstr "" "冲突解决完毕后，用 'git add <路径>' 或 'git rm <路径>'\n" "对修正后的文件做标记，然后用 'git commit' 提交" -#: sequencer.c:401 sequencer.c:2847 +#: sequencer.c:403 sequencer.c:2993 #, c-format msgid "could not lock '%s'" msgstr "不能锁定 '%s'" -#: sequencer.c:408 +#: sequencer.c:410 #, c-format msgid "could not write eol to '%s'" msgstr "不能将换行符写入 '%s'" -#: sequencer.c:413 sequencer.c:2652 sequencer.c:2853 sequencer.c:2867 -#: sequencer.c:3130 +#: sequencer.c:415 sequencer.c:2798 sequencer.c:2999 sequencer.c:3013 +#: sequencer.c:3277 #, c-format msgid "failed to finalize '%s'" msgstr "无法完成 '%s'" -#: sequencer.c:436 sequencer.c:1585 sequencer.c:2672 sequencer.c:3112 -#: sequencer.c:3221 builtin/am.c:244 builtin/commit.c:763 builtin/merge.c:1117 -#: builtin/rebase.c:568 +#: sequencer.c:438 sequencer.c:1707 sequencer.c:2818 sequencer.c:3259 +#: sequencer.c:3368 builtin/am.c:244 builtin/commit.c:783 builtin/merge.c:1117 +#: builtin/rebase.c:589 #, c-format msgid "could not read '%s'" msgstr "不能读取 '%s'" -#: sequencer.c:462 +#: sequencer.c:464 #, c-format msgid "your local changes would be overwritten by %s." msgstr "您的本地修改将被%s覆盖。" -#: sequencer.c:466 +#: sequencer.c:468 msgid "commit your changes or stash them to proceed." msgstr "提交您的修改或贮藏后再继续。" -#: sequencer.c:498 +#: sequencer.c:500 #, c-format msgid "%s: fast-forward" msgstr "%s：快进" -#: sequencer.c:537 builtin/tag.c:565 +#: sequencer.c:539 builtin/tag.c:565 #, c-format msgid "Invalid cleanup mode %s" msgstr "无效的清理模式 %s" @@ -5847,65 +6291,69 @@ msgstr "无效的清理模式 %s" #. TRANSLATORS: %s will be "revert", "cherry-pick" or #. "rebase -i". #. -#: sequencer.c:631 +#: sequencer.c:633 #, c-format msgid "%s: Unable to write new index file" msgstr "%s：无法写入新索引文件" -#: sequencer.c:648 +#: sequencer.c:650 msgid "unable to update cache tree" msgstr "不能更新缓存树" -#: sequencer.c:662 +#: sequencer.c:664 msgid "could not resolve HEAD commit" msgstr "不能解析 HEAD 提交" -#: sequencer.c:742 +#: sequencer.c:744 #, c-format msgid "no key present in '%.*s'" msgstr "在 '%.*s' 中没有 key" -#: sequencer.c:753 +#: sequencer.c:755 #, c-format msgid "unable to dequote value of '%s'" msgstr "无法为 '%s' 的值去引号" -#: sequencer.c:790 wrapper.c:190 wrapper.c:360 builtin/am.c:705 -#: builtin/am.c:797 builtin/merge.c:1114 builtin/rebase.c:1046 +#: sequencer.c:792 wrapper.c:190 wrapper.c:360 builtin/am.c:705 +#: builtin/am.c:797 builtin/merge.c:1114 builtin/rebase.c:1074 #, c-format msgid "could not open '%s' for reading" msgstr "无法打开 '%s' 进行读取" -#: sequencer.c:800 +#: sequencer.c:802 msgid "'GIT_AUTHOR_NAME' already given" msgstr "已经给出 'GIT_AUTHOR_NAME'" -#: sequencer.c:805 +#: sequencer.c:807 msgid "'GIT_AUTHOR_EMAIL' already given" msgstr "已经给出 'GIT_AUTHOR_EMAIL'" -#: sequencer.c:810 +#: sequencer.c:812 msgid "'GIT_AUTHOR_DATE' already given" msgstr "已经给出 'GIT_AUTHOR_DATE'" -#: sequencer.c:814 +#: sequencer.c:816 #, c-format msgid "unknown variable '%s'" msgstr "未知变量 '%s'" -#: sequencer.c:819 +#: sequencer.c:821 msgid "missing 'GIT_AUTHOR_NAME'" msgstr "缺少 'GIT_AUTHOR_NAME'" -#: sequencer.c:821 +#: sequencer.c:823 msgid "missing 'GIT_AUTHOR_EMAIL'" msgstr "缺少 'GIT_AUTHOR_EMAIL'" -#: sequencer.c:823 +#: sequencer.c:825 msgid "missing 'GIT_AUTHOR_DATE'" msgstr "缺少 'GIT_AUTHOR_DATE'" -#: sequencer.c:872 +#: sequencer.c:902 sequencer.c:1427 +msgid "malformed ident line" +msgstr "错误的身份信息" + +#: sequencer.c:925 #, c-format msgid "" "you have staged changes in your working tree\n" @@ -5934,11 +6382,11 @@ msgstr "" "\n" " git rebase --continue\n" -#: sequencer.c:1146 +#: sequencer.c:1218 msgid "'prepare-commit-msg' hook failed" msgstr "'prepare-commit-msg' 钩子失败" -#: sequencer.c:1153 +#: sequencer.c:1224 msgid "" "Your name and email address were configured automatically based\n" "on your username and hostname. Please check that they are accurate.\n" @@ -5962,7 +6410,7 @@ msgstr "" "\n" " git commit --amend --reset-author\n" -#: sequencer.c:1166 +#: sequencer.c:1237 msgid "" "Your name and email address were configured automatically based\n" "on your username and hostname. Please check that they are accurate.\n" @@ -5985,326 +6433,330 @@ msgstr "" "\n" " git commit --amend --reset-author\n" -#: sequencer.c:1208 +#: sequencer.c:1279 msgid "couldn't look up newly created commit" msgstr "无法找到新创建的提交" -#: sequencer.c:1210 +#: sequencer.c:1281 msgid "could not parse newly created commit" msgstr "不能解析新创建的提交" -#: sequencer.c:1256 +#: sequencer.c:1327 msgid "unable to resolve HEAD after creating commit" msgstr "创建提交后，不能解析 HEAD" -#: sequencer.c:1258 +#: sequencer.c:1329 msgid "detached HEAD" msgstr "分离头指针" # 译者：中文字符串拼接，可删除前导空格 -#: sequencer.c:1262 +#: sequencer.c:1333 msgid " (root-commit)" msgstr "（根提交）" -#: sequencer.c:1283 +#: sequencer.c:1354 msgid "could not parse HEAD" msgstr "不能解析 HEAD" -#: sequencer.c:1285 +#: sequencer.c:1356 #, c-format msgid "HEAD %s is not a commit!" msgstr "HEAD %s 不是一个提交！" -#: sequencer.c:1289 builtin/commit.c:1571 +#: sequencer.c:1360 sequencer.c:1458 builtin/commit.c:1569 msgid "could not parse HEAD commit" msgstr "不能解析 HEAD 提交" -#: sequencer.c:1341 sequencer.c:1933 +#: sequencer.c:1411 sequencer.c:2055 msgid "unable to parse commit author" msgstr "不能解析提交作者" -#: sequencer.c:1352 builtin/am.c:1561 builtin/merge.c:684 +#: sequencer.c:1431 +msgid "corrupted author without date information" +msgstr "损坏的没有日期的作者信息" + +#: sequencer.c:1447 builtin/am.c:1561 builtin/merge.c:684 msgid "git write-tree failed to write a tree" msgstr "git write-tree 无法写入树对象" -#: sequencer.c:1369 sequencer.c:1429 +#: sequencer.c:1480 sequencer.c:1550 #, c-format msgid "unable to read commit message from '%s'" msgstr "不能从 '%s' 读取提交说明" -#: sequencer.c:1396 builtin/am.c:1583 builtin/commit.c:1670 builtin/merge.c:883 +#: sequencer.c:1516 builtin/am.c:1583 builtin/commit.c:1668 builtin/merge.c:883 #: builtin/merge.c:908 msgid "failed to write commit object" msgstr "写提交对象失败" -#: sequencer.c:1456 +#: sequencer.c:1577 #, c-format msgid "could not parse commit %s" msgstr "不能解析提交 %s" -#: sequencer.c:1461 +#: sequencer.c:1582 #, c-format msgid "could not parse parent commit %s" msgstr "不能解析父提交 %s" -#: sequencer.c:1535 sequencer.c:1645 +#: sequencer.c:1656 sequencer.c:1767 #, c-format msgid "unknown command: %d" msgstr "未知命令：%d" -#: sequencer.c:1592 sequencer.c:1617 +#: sequencer.c:1714 sequencer.c:1739 #, c-format msgid "This is a combination of %d commits." msgstr "这是一个 %d 个提交的组合。" -#: sequencer.c:1602 +#: sequencer.c:1724 msgid "need a HEAD to fixup" msgstr "需要一个 HEAD 来修复" -#: sequencer.c:1604 sequencer.c:3157 +#: sequencer.c:1726 sequencer.c:3304 msgid "could not read HEAD" msgstr "不能读取 HEAD" -#: sequencer.c:1606 +#: sequencer.c:1728 msgid "could not read HEAD's commit message" msgstr "不能读取 HEAD 的提交说明" -#: sequencer.c:1612 +#: sequencer.c:1734 #, c-format msgid "cannot write '%s'" msgstr "不能写 '%s'" -#: sequencer.c:1619 git-rebase--preserve-merges.sh:496 +#: sequencer.c:1741 git-rebase--preserve-merges.sh:496 msgid "This is the 1st commit message:" msgstr "这是第一个提交说明：" -#: sequencer.c:1627 +#: sequencer.c:1749 #, c-format msgid "could not read commit message of %s" msgstr "不能读取 %s 的提交说明" -#: sequencer.c:1634 +#: sequencer.c:1756 #, c-format msgid "This is the commit message #%d:" msgstr "这是提交说明 #%d：" -#: sequencer.c:1640 +#: sequencer.c:1762 #, c-format msgid "The commit message #%d will be skipped:" msgstr "提交说明 #%d 将被跳过：" -#: sequencer.c:1728 +#: sequencer.c:1850 msgid "your index file is unmerged." msgstr "您的索引文件未完成合并。" -#: sequencer.c:1735 +#: sequencer.c:1857 msgid "cannot fixup root commit" msgstr "不能修复根提交" -#: sequencer.c:1754 +#: sequencer.c:1876 #, c-format msgid "commit %s is a merge but no -m option was given." msgstr "提交 %s 是一个合并提交但未提供 -m 选项。" -#: sequencer.c:1762 sequencer.c:1770 +#: sequencer.c:1884 sequencer.c:1892 #, c-format msgid "commit %s does not have parent %d" msgstr "提交 %s 没有第 %d 个父提交" -#: sequencer.c:1776 +#: sequencer.c:1898 #, c-format msgid "cannot get commit message for %s" msgstr "不能得到 %s 的提交说明" #. TRANSLATORS: The first %s will be a "todo" command like #. "revert" or "pick", the second %s a SHA1. -#: sequencer.c:1795 +#: sequencer.c:1917 #, c-format msgid "%s: cannot parse parent commit %s" msgstr "%s：不能解析父提交 %s" -#: sequencer.c:1860 +#: sequencer.c:1982 #, c-format msgid "could not rename '%s' to '%s'" msgstr "不能将 '%s' 重命名为 '%s'" -#: sequencer.c:1915 +#: sequencer.c:2037 #, c-format msgid "could not revert %s... %s" msgstr "不能还原 %s... %s" -#: sequencer.c:1916 +#: sequencer.c:2038 #, c-format msgid "could not apply %s... %s" msgstr "不能应用 %s... %s" -#: sequencer.c:1983 +#: sequencer.c:2105 #, c-format msgid "git %s: failed to read the index" msgstr "git %s：无法读取索引" -#: sequencer.c:1990 +#: sequencer.c:2112 #, c-format msgid "git %s: failed to refresh the index" msgstr "git %s：无法刷新索引" -#: sequencer.c:2066 +#: sequencer.c:2189 #, c-format msgid "%s does not accept arguments: '%s'" msgstr "%s 不接受参数：'%s'" -#: sequencer.c:2075 +#: sequencer.c:2198 #, c-format msgid "missing arguments for %s" msgstr "缺少 %s 的参数" -#: sequencer.c:2112 +#: sequencer.c:2235 #, c-format msgid "could not parse '%.*s'" msgstr "无法解析 '%.*s'" -#: sequencer.c:2166 +#: sequencer.c:2289 #, c-format msgid "invalid line %d: %.*s" msgstr "无效行 %d：%.*s" -#: sequencer.c:2177 +#: sequencer.c:2300 #, c-format msgid "cannot '%s' without a previous commit" msgstr "没有父提交的情况下不能 '%s'" -#: sequencer.c:2225 builtin/rebase.c:153 builtin/rebase.c:178 -#: builtin/rebase.c:204 builtin/rebase.c:229 +#: sequencer.c:2348 builtin/rebase.c:172 builtin/rebase.c:197 +#: builtin/rebase.c:223 builtin/rebase.c:248 #, c-format msgid "could not read '%s'." msgstr "不能读取 '%s'。" -#: sequencer.c:2261 +#: sequencer.c:2384 msgid "cancelling a cherry picking in progress" msgstr "正在取消一个进行中的拣选" -#: sequencer.c:2268 +#: sequencer.c:2391 msgid "cancelling a revert in progress" msgstr "正在取消一个进行中的还原" -#: sequencer.c:2302 +#: sequencer.c:2435 msgid "please fix this using 'git rebase --edit-todo'." msgstr "请用 'git rebase --edit-todo' 来修改。" -#: sequencer.c:2304 +#: sequencer.c:2437 #, c-format msgid "unusable instruction sheet: '%s'" msgstr "不可用的指令清单：'%s'" -#: sequencer.c:2309 +#: sequencer.c:2442 msgid "no commits parsed." msgstr "没有解析提交。" -#: sequencer.c:2320 +#: sequencer.c:2453 msgid "cannot cherry-pick during a revert." msgstr "不能在回退中执行拣选。" -#: sequencer.c:2322 +#: sequencer.c:2455 msgid "cannot revert during a cherry-pick." msgstr "不能在拣选中执行回退。" -#: sequencer.c:2404 +#: sequencer.c:2533 #, c-format msgid "invalid value for %s: %s" msgstr "%s 的值无效：%s" -#: sequencer.c:2491 +#: sequencer.c:2630 msgid "unusable squash-onto" msgstr "不可用的 squash-onto" -#: sequencer.c:2507 +#: sequencer.c:2646 #, c-format msgid "malformed options sheet: '%s'" msgstr "格式错误的选项清单：'%s'" -#: sequencer.c:2590 sequencer.c:4308 +#: sequencer.c:2736 sequencer.c:4463 msgid "empty commit set passed" msgstr "提供了空的提交集" -#: sequencer.c:2606 +#: sequencer.c:2752 msgid "revert is already in progress" msgstr "一个还原操作已在进行" -#: sequencer.c:2608 +#: sequencer.c:2754 #, c-format msgid "try \"git revert (--continue | %s--abort | --quit)\"" msgstr "尝试 \"git revert (--continue | %s--abort | --quit)\"" -#: sequencer.c:2611 +#: sequencer.c:2757 msgid "cherry-pick is already in progress" msgstr "拣选操作已在进行" -#: sequencer.c:2613 +#: sequencer.c:2759 #, c-format msgid "try \"git cherry-pick (--continue | %s--abort | --quit)\"" msgstr "尝试 \"git cherry-pick (--continue | %s--abort | --quit)\"" -#: sequencer.c:2627 +#: sequencer.c:2773 #, c-format msgid "could not create sequencer directory '%s'" msgstr "不能创建序列目录 '%s'" -#: sequencer.c:2642 +#: sequencer.c:2788 msgid "could not lock HEAD" msgstr "不能锁定 HEAD" -#: sequencer.c:2702 sequencer.c:4057 +#: sequencer.c:2848 sequencer.c:4209 msgid "no cherry-pick or revert in progress" msgstr "拣选或还原操作并未进行" -#: sequencer.c:2704 sequencer.c:2715 +#: sequencer.c:2850 sequencer.c:2861 msgid "cannot resolve HEAD" msgstr "不能解析 HEAD" -#: sequencer.c:2706 sequencer.c:2750 +#: sequencer.c:2852 sequencer.c:2896 msgid "cannot abort from a branch yet to be born" msgstr "不能从尚未建立的分支终止" -#: sequencer.c:2736 builtin/grep.c:736 +#: sequencer.c:2882 builtin/grep.c:736 #, c-format msgid "cannot open '%s'" msgstr "不能打开 '%s'" -#: sequencer.c:2738 +#: sequencer.c:2884 #, c-format msgid "cannot read '%s': %s" msgstr "不能读取 '%s'：%s" -#: sequencer.c:2739 +#: sequencer.c:2885 msgid "unexpected end of file" msgstr "意外的文件结束" -#: sequencer.c:2745 +#: sequencer.c:2891 #, c-format msgid "stored pre-cherry-pick HEAD file '%s' is corrupt" msgstr "保存拣选提交前的 HEAD 文件 '%s' 损坏" -#: sequencer.c:2756 +#: sequencer.c:2902 msgid "You seem to have moved HEAD. Not rewinding, check your HEAD!" msgstr "您好像移动了 HEAD。未能回退，检查您的 HEAD！" -#: sequencer.c:2797 +#: sequencer.c:2943 msgid "no revert in progress" msgstr "没有正在进行的还原" -#: sequencer.c:2805 +#: sequencer.c:2951 msgid "no cherry-pick in progress" msgstr "没有正在进行的拣选" -#: sequencer.c:2815 +#: sequencer.c:2961 msgid "failed to skip the commit" msgstr "无法跳过这个提交" -#: sequencer.c:2822 +#: sequencer.c:2968 msgid "there is nothing to skip" msgstr "没有要跳过的" -#: sequencer.c:2825 +#: sequencer.c:2971 #, c-format msgid "" "have you committed already?\n" @@ -6313,21 +6765,21 @@ msgstr "" "您已经提交了么？\n" "试试 \"git %s --continue\"" -#: sequencer.c:2949 sequencer.c:3969 +#: sequencer.c:3095 sequencer.c:4121 #, c-format msgid "could not update %s" msgstr "不能更新 %s" -#: sequencer.c:2987 sequencer.c:3949 +#: sequencer.c:3134 sequencer.c:4101 msgid "cannot read HEAD" msgstr "不能读取 HEAD" -#: sequencer.c:3004 +#: sequencer.c:3151 #, c-format msgid "unable to copy '%s' to '%s'" msgstr "无法拷贝 '%s' 至 '%s'" -#: sequencer.c:3012 +#: sequencer.c:3159 #, c-format msgid "" "You can amend the commit now, with\n" @@ -6346,28 +6798,23 @@ msgstr "" "\n" " git rebase --continue\n" -#: sequencer.c:3022 +#: sequencer.c:3169 #, c-format msgid "Could not apply %s... %.*s" msgstr "不能应用 %s... %.*s" -#: sequencer.c:3029 +#: sequencer.c:3176 #, c-format msgid "Could not merge %.*s" msgstr "不能合并 %.*s" -#: sequencer.c:3043 sequencer.c:3047 builtin/difftool.c:641 +#: sequencer.c:3190 sequencer.c:3194 builtin/difftool.c:641 #, c-format msgid "could not copy '%s' to '%s'" msgstr "不能拷贝 '%s' 至 '%s'" -#: sequencer.c:3069 sequencer.c:3506 builtin/rebase.c:850 builtin/rebase.c:1613 -#: builtin/rebase.c:1987 builtin/rebase.c:2031 -msgid "could not read index" -msgstr "不能读取索引" - # 译者：注意保持前导空格 -#: sequencer.c:3074 +#: sequencer.c:3221 #, c-format msgid "" "execution failed: %s\n" @@ -6382,11 +6829,11 @@ msgstr "" " git rebase --continue\n" "\n" -#: sequencer.c:3080 +#: sequencer.c:3227 msgid "and made changes to the index and/or the working tree\n" msgstr "并且修改索引和/或工作区\n" -#: sequencer.c:3086 +#: sequencer.c:3233 #, c-format msgid "" "execution succeeded: %s\n" @@ -6403,76 +6850,72 @@ msgstr "" " git rebase --continue\n" "\n" -#: sequencer.c:3147 +#: sequencer.c:3294 #, c-format msgid "illegal label name: '%.*s'" msgstr "非法的标签名称：'%.*s'" -#: sequencer.c:3201 +#: sequencer.c:3348 msgid "writing fake root commit" msgstr "写伪根提交" -#: sequencer.c:3206 +#: sequencer.c:3353 msgid "writing squash-onto" msgstr "写入 squash-onto" -#: sequencer.c:3244 builtin/rebase.c:855 builtin/rebase.c:861 +#: sequencer.c:3391 builtin/rebase.c:876 builtin/rebase.c:882 #, c-format msgid "failed to find tree of %s" msgstr "无法找到 %s 指向的树。" -#: sequencer.c:3262 builtin/rebase.c:874 -msgid "could not write index" -msgstr "不能写入索引" - -#: sequencer.c:3289 +#: sequencer.c:3436 #, c-format msgid "could not resolve '%s'" msgstr "无法解析 '%s'" -#: sequencer.c:3320 +#: sequencer.c:3467 msgid "cannot merge without a current revision" msgstr "没有当前版本不能合并" -#: sequencer.c:3342 +#: sequencer.c:3489 #, c-format msgid "unable to parse '%.*s'" msgstr "无法解析 '%.*s'" -#: sequencer.c:3351 +#: sequencer.c:3498 #, c-format msgid "nothing to merge: '%.*s'" msgstr "无可用合并：'%.*s'" -#: sequencer.c:3363 +#: sequencer.c:3510 msgid "octopus merge cannot be executed on top of a [new root]" msgstr "章鱼合并不能在一个新的根提交上执行" -#: sequencer.c:3378 +#: sequencer.c:3526 #, c-format msgid "could not get commit message of '%s'" msgstr "不能获取 '%s' 的提交说明" -#: sequencer.c:3538 +#: sequencer.c:3688 #, c-format msgid "could not even attempt to merge '%.*s'" msgstr "甚至不能尝试合并 '%.*s'" -#: sequencer.c:3554 +#: sequencer.c:3704 msgid "merge: Unable to write new index file" msgstr "合并：无法写入新索引文件" -#: sequencer.c:3623 builtin/rebase.c:712 +#: sequencer.c:3773 builtin/rebase.c:733 #, c-format msgid "Applied autostash.\n" msgstr "已应用 autostash。\n" -#: sequencer.c:3635 +#: sequencer.c:3785 #, c-format msgid "cannot store %s" msgstr "不能存储 %s" -#: sequencer.c:3638 builtin/rebase.c:728 git-rebase--preserve-merges.sh:113 +#: sequencer.c:3788 builtin/rebase.c:749 git-rebase--preserve-merges.sh:113 #, c-format msgid "" "Applying autostash resulted in conflicts.\n" @@ -6483,31 +6926,31 @@ msgstr "" "您的修改安全地保存在贮藏区中。\n" "您可以在任何时候运行 \"git stash pop\" 或 \"git stash drop\"。\n" -#: sequencer.c:3699 +#: sequencer.c:3849 #, c-format msgid "could not checkout %s" msgstr "不能检出 %s" -#: sequencer.c:3713 +#: sequencer.c:3863 #, c-format msgid "%s: not a valid OID" msgstr "%s：不是一个有效的对象 ID" -#: sequencer.c:3718 git-rebase--preserve-merges.sh:779 +#: sequencer.c:3868 git-rebase--preserve-merges.sh:779 msgid "could not detach HEAD" msgstr "不能分离头指针" -#: sequencer.c:3733 +#: sequencer.c:3883 #, c-format msgid "Stopped at HEAD\n" msgstr "停止在 HEAD\n" -#: sequencer.c:3735 +#: sequencer.c:3885 #, c-format msgid "Stopped at %s\n" msgstr "停止在 %s\n" -#: sequencer.c:3743 +#: sequencer.c:3893 #, c-format msgid "" "Could not execute the todo command\n" @@ -6527,48 +6970,48 @@ msgstr "" " git rebase --edit-todo\n" " git rebase --continue\n" -#: sequencer.c:3827 +#: sequencer.c:3979 #, c-format msgid "Stopped at %s... %.*s\n" msgstr "停止在 %s... %.*s\n" -#: sequencer.c:3898 +#: sequencer.c:4050 #, c-format msgid "unknown command %d" msgstr "未知命令 %d" -#: sequencer.c:3957 +#: sequencer.c:4109 msgid "could not read orig-head" msgstr "不能读取 orig-head" -#: sequencer.c:3962 +#: sequencer.c:4114 msgid "could not read 'onto'" msgstr "不能读取 'onto'" -#: sequencer.c:3976 +#: sequencer.c:4128 #, c-format msgid "could not update HEAD to %s" msgstr "不能更新 HEAD 为 %s" -#: sequencer.c:4069 +#: sequencer.c:4221 msgid "cannot rebase: You have unstaged changes." msgstr "不能变基：您有未暂存的变更。" -#: sequencer.c:4078 +#: sequencer.c:4230 msgid "cannot amend non-existing commit" msgstr "不能修补不存在的提交" -#: sequencer.c:4080 +#: sequencer.c:4232 #, c-format msgid "invalid file: '%s'" msgstr "无效文件：'%s'" -#: sequencer.c:4082 +#: sequencer.c:4234 #, c-format msgid "invalid contents: '%s'" msgstr "无效内容：'%s'" -#: sequencer.c:4085 +#: sequencer.c:4237 msgid "" "\n" "You have uncommitted changes in your working tree. Please, commit them\n" @@ -6577,42 +7020,42 @@ msgstr "" "\n" "您的工作区中有未提交的变更。请先提交然后再次运行 'git rebase --continue'。" -#: sequencer.c:4121 sequencer.c:4159 +#: sequencer.c:4273 sequencer.c:4312 #, c-format msgid "could not write file: '%s'" msgstr "不能写入文件：'%s'" -#: sequencer.c:4174 +#: sequencer.c:4327 msgid "could not remove CHERRY_PICK_HEAD" msgstr "不能删除 CHERRY_PICK_HEAD" -#: sequencer.c:4181 +#: sequencer.c:4334 msgid "could not commit staged changes." msgstr "不能提交暂存的修改。" -#: sequencer.c:4285 +#: sequencer.c:4440 #, c-format msgid "%s: can't cherry-pick a %s" msgstr "%s：不能拣选一个%s" -#: sequencer.c:4289 +#: sequencer.c:4444 #, c-format msgid "%s: bad revision" msgstr "%s：错误的版本" -#: sequencer.c:4324 +#: sequencer.c:4479 msgid "can't revert as initial commit" msgstr "不能作为初始提交回退" -#: sequencer.c:4774 +#: sequencer.c:4952 msgid "make_script: unhandled options" msgstr "make_script：有未能处理的选项" -#: sequencer.c:4777 +#: sequencer.c:4955 msgid "make_script: error preparing revisions" msgstr "make_script：准备版本时错误" -#: sequencer.c:4935 +#: sequencer.c:5113 msgid "" "You can fix this with 'git rebase --edit-todo' and then run 'git rebase --" "continue'.\n" @@ -6621,15 +7064,15 @@ msgstr "" "您可以用 'git rebase --edit-todo' 修正，然后执行 'git rebase --continue'。\n" "或者您可以用 'git rebase --abort' 终止变基。\n" -#: sequencer.c:5047 sequencer.c:5064 +#: sequencer.c:5226 sequencer.c:5243 msgid "nothing to do" msgstr "无事可做" -#: sequencer.c:5078 +#: sequencer.c:5257 msgid "could not skip unnecessary pick commands" msgstr "无法跳过不必要的拣选" -#: sequencer.c:5166 +#: sequencer.c:5351 msgid "the script was already rearranged." msgstr "脚本已经重新编排。" @@ -7125,6 +7568,11 @@ msgid_plural "%u bytes/s" msgstr[0] "%u 字节/秒" msgstr[1] "%u 字节/秒" +#: strbuf.c:1149 +#, c-format +msgid "could not edit '%s'" +msgstr "不能编辑 '%s'" + #: submodule.c:114 submodule.c:143 msgid "Cannot change unmerged .gitmodules, resolve merge conflicts first" msgstr "无法修改未合并的 .gitmodules，先解决合并冲突" @@ -7158,7 +7606,7 @@ msgstr "路径规格 '%s' 在子模组 '%.*s' 中" msgid "submodule entry '%s' (%s) is a %s, not a commit" msgstr "子模组条目 '%s'（%s）是一个 %s，不是一个提交" -#: submodule.c:1147 builtin/branch.c:680 builtin/submodule--helper.c:1989 +#: submodule.c:1147 builtin/branch.c:680 builtin/submodule--helper.c:2016 msgid "Failed to resolve HEAD as a valid ref." msgstr "无法将 HEAD 解析为有效引用。" @@ -7197,18 +7645,28 @@ msgstr "子模组 '%s' 中有脏索引" msgid "Submodule '%s' could not be updated." msgstr "子模组 '%s' 无法被更新。" -#: submodule.c:2007 +#: submodule.c:2027 +#, c-format +msgid "submodule git dir '%s' is inside git dir '%.*s'" +msgstr "子模组 git 目录 '%s' 位于 git 目录 '%.*s' 中" + +#: submodule.c:2048 #, c-format msgid "" "relocate_gitdir for submodule '%s' with more than one worktree not supported" msgstr "不支持对有多个工作区的子模组 '%s' 执行 relocate_gitdir" -#: submodule.c:2019 submodule.c:2074 +#: submodule.c:2060 submodule.c:2119 #, c-format msgid "could not lookup name for submodule '%s'" msgstr "不能查询子模组 '%s' 的名称" -#: submodule.c:2026 +#: submodule.c:2064 +#, c-format +msgid "refusing to move '%s' into an existing git dir" +msgstr "禁止移动 '%s' 到现存 git 目录中" + +#: submodule.c:2071 #, c-format msgid "" "Migrating git directory of '%s%s' from\n" @@ -7219,16 +7677,16 @@ msgstr "" "'%s' 迁移至\n" "'%s'\n" -#: submodule.c:2109 +#: submodule.c:2154 #, c-format msgid "could not recurse into submodule '%s'" msgstr "无法递归进子模组路径 '%s'" -#: submodule.c:2153 +#: submodule.c:2198 msgid "could not start ls-files in .." msgstr "无法在 .. 中启动 ls-files" -#: submodule.c:2192 +#: submodule.c:2237 #, c-format msgid "ls-tree returned unexpected return code %d" msgstr "ls-tree 返回未知返回值 %d" @@ -7247,12 +7705,12 @@ msgstr "submodule.fetchjobs 不允许为负值" msgid "ignoring '%s' which may be interpreted as a command-line option: %s" msgstr "忽略可能被解析为命令行选项的 '%s'：%s" -#: submodule-config.c:490 +#: submodule-config.c:498 #, c-format msgid "invalid value for %s" msgstr "%s 的值无效" -#: submodule-config.c:761 +#: submodule-config.c:769 #, c-format msgid "Could not update .gitmodules entry %s" msgstr "不能更新 .gitmodules 条目 %s" @@ -7398,7 +7856,7 @@ msgstr "正在终止。" msgid "failed to push all needed submodules" msgstr "不能推送全部需要的子模组" -#: transport.c:1345 transport-helper.c:655 +#: transport.c:1345 transport-helper.c:656 msgid "operation not supported by protocol" msgstr "协议不支持该操作" @@ -7411,7 +7869,7 @@ msgstr "完整写入远程助手失败" msgid "unable to find remote helper for '%s'" msgstr "无法为 '%s' 找到远程助手" -#: transport-helper.c:160 transport-helper.c:569 +#: transport-helper.c:160 transport-helper.c:570 msgid "can't dup helper output fd" msgstr "无法复制助手输出文件句柄" @@ -7436,90 +7894,90 @@ msgstr "%s 意外地说：'%s'" msgid "%s also locked %s" msgstr "%s 也锁定了 %s" -#: transport-helper.c:491 +#: transport-helper.c:492 msgid "couldn't run fast-import" msgstr "不能执行 fast-import" -#: transport-helper.c:514 +#: transport-helper.c:515 msgid "error while running fast-import" msgstr "执行 fast-import 出错" -#: transport-helper.c:543 transport-helper.c:1132 +#: transport-helper.c:544 transport-helper.c:1133 #, c-format msgid "could not read ref %s" msgstr "无法读取引用 %s" -#: transport-helper.c:588 +#: transport-helper.c:589 #, c-format msgid "unknown response to connect: %s" msgstr "连接时未知的响应：%s" -#: transport-helper.c:610 +#: transport-helper.c:611 msgid "setting remote service path not supported by protocol" msgstr "协议不支持设置远程服务路径" -#: transport-helper.c:612 +#: transport-helper.c:613 msgid "invalid remote service path" msgstr "无效的远程服务路径" -#: transport-helper.c:658 +#: transport-helper.c:659 #, c-format msgid "can't connect to subservice %s" msgstr "不能连接到子服务 %s" -#: transport-helper.c:734 +#: transport-helper.c:735 #, c-format msgid "expected ok/error, helper said '%s'" msgstr "预期 ok/error，助手说 '%s'" -#: transport-helper.c:787 +#: transport-helper.c:788 #, c-format msgid "helper reported unexpected status of %s" msgstr "助手报告 %s 的意外状态" -#: transport-helper.c:848 +#: transport-helper.c:849 #, c-format msgid "helper %s does not support dry-run" msgstr "助手 %s 不支持 dry-run" -#: transport-helper.c:851 +#: transport-helper.c:852 #, c-format msgid "helper %s does not support --signed" msgstr "助手 %s 不支持 --signed" -#: transport-helper.c:854 +#: transport-helper.c:855 #, c-format msgid "helper %s does not support --signed=if-asked" msgstr "助手 %s 不支持 --signed=if-asked" -#: transport-helper.c:859 +#: transport-helper.c:860 #, c-format msgid "helper %s does not support --atomic" msgstr "助手 %s 不支持 --atomic" -#: transport-helper.c:865 +#: transport-helper.c:866 #, c-format msgid "helper %s does not support 'push-option'" msgstr "助手 %s 不支持 'push-option'" -#: transport-helper.c:963 +#: transport-helper.c:964 msgid "remote-helper doesn't support push; refspec needed" msgstr "remote-heper 不支持 push，需要引用表达式" -#: transport-helper.c:968 +#: transport-helper.c:969 #, c-format msgid "helper %s does not support 'force'" msgstr "助手 %s 不支持 'force'" -#: transport-helper.c:1015 +#: transport-helper.c:1016 msgid "couldn't run fast-export" msgstr "无法执行 fast-export" -#: transport-helper.c:1020 +#: transport-helper.c:1021 msgid "error while running fast-export" msgstr "执行 fast-export 时出错" -#: transport-helper.c:1045 +#: transport-helper.c:1046 #, c-format msgid "" "No refs in common and none specified; doing nothing.\n" @@ -7528,47 +7986,47 @@ msgstr "" "没有共同的引用并且也没有指定，什么也不会做。\n" "可能您应该指定一个分支如 'master'。\n" -#: transport-helper.c:1118 +#: transport-helper.c:1119 #, c-format msgid "malformed response in ref list: %s" msgstr "引用列表中格式错误的响应：%s" -#: transport-helper.c:1270 +#: transport-helper.c:1271 #, c-format msgid "read(%s) failed" msgstr "读取（%s）失败" -#: transport-helper.c:1297 +#: transport-helper.c:1298 #, c-format msgid "write(%s) failed" msgstr "写（%s）失败" -#: transport-helper.c:1346 +#: transport-helper.c:1347 #, c-format msgid "%s thread failed" msgstr "%s 线程失败" -#: transport-helper.c:1350 +#: transport-helper.c:1351 #, c-format msgid "%s thread failed to join: %s" msgstr "%s 线程等待失败：%s" -#: transport-helper.c:1369 transport-helper.c:1373 +#: transport-helper.c:1370 transport-helper.c:1374 #, c-format msgid "can't start thread for copying data: %s" msgstr "不能启动线程来拷贝数据：%s" -#: transport-helper.c:1410 +#: transport-helper.c:1411 #, c-format msgid "%s process failed to wait" msgstr "%s 进程等待失败" -#: transport-helper.c:1414 +#: transport-helper.c:1415 #, c-format msgid "%s process failed" msgstr "%s 进程失败" -#: transport-helper.c:1432 transport-helper.c:1441 +#: transport-helper.c:1433 transport-helper.c:1442 msgid "can't start thread for copying data" msgstr "不能启动线程来拷贝数据" @@ -7584,7 +8042,12 @@ msgstr "树对象中的条目模式错误" msgid "empty filename in tree entry" msgstr "树对象条目中空的文件名" -#: tree-walk.c:118 +#: tree-walk.c:48 +#, c-format +msgid "filename in tree entry contains backslash: '%s'" +msgstr "树条目中的文件名包含反斜杠：'%s'" + +#: tree-walk.c:124 msgid "too-short tree file" msgstr "太短的树文件" @@ -7822,6 +8285,10 @@ msgstr "" "以下路径发生碰撞（如：在不区分大小写的文件系统上的区分大小写的路径），\n" "并且碰撞组中只有一个文件存在工作区中：\n" +#: unpack-trees.c:1441 +msgid "Updating index flags" +msgstr "正在更新索引标志" + #: urlmatch.c:163 msgid "invalid URL scheme name or missing '://' suffix" msgstr "无效的 URL 方案名称或丢失 '://' 后缀" @@ -8439,131 +8906,131 @@ msgstr "另外，您的索引中包含未提交的变更。" msgid "cannot %s: Your index contains uncommitted changes." msgstr "不能%s：您的索引中包含未提交的变更。" -#: compat/precompose_utf8.c:58 builtin/clone.c:452 +#: compat/precompose_utf8.c:58 builtin/clone.c:455 #, c-format msgid "failed to unlink '%s'" msgstr "删除 '%s' 失败" -#: builtin/add.c:25 +#: builtin/add.c:26 msgid "git add [] [--] ..." msgstr "git add [<选项>] [--] <路径规格>..." -#: builtin/add.c:84 +#: builtin/add.c:87 #, c-format msgid "unexpected diff status %c" msgstr "意外的差异状态 %c" -#: builtin/add.c:89 builtin/commit.c:288 +#: builtin/add.c:92 builtin/commit.c:288 msgid "updating files failed" msgstr "更新文件失败" -#: builtin/add.c:99 +#: builtin/add.c:102 #, c-format msgid "remove '%s'\n" msgstr "删除 '%s'\n" -#: builtin/add.c:174 +#: builtin/add.c:177 msgid "Unstaged changes after refreshing the index:" msgstr "刷新索引之后尚未被暂存的变更：" -#: builtin/add.c:234 builtin/rev-parse.c:897 +#: builtin/add.c:252 builtin/rev-parse.c:899 msgid "Could not read the index" msgstr "不能读取索引" -#: builtin/add.c:245 +#: builtin/add.c:263 #, c-format msgid "Could not open '%s' for writing." msgstr "无法为写入打开 '%s'。" -#: builtin/add.c:249 +#: builtin/add.c:267 msgid "Could not write patch" msgstr "不能生成补丁" -#: builtin/add.c:252 +#: builtin/add.c:270 msgid "editing patch failed" msgstr "编辑补丁失败" -#: builtin/add.c:255 +#: builtin/add.c:273 #, c-format msgid "Could not stat '%s'" msgstr "不能对 '%s' 调用 stat" -#: builtin/add.c:257 +#: builtin/add.c:275 msgid "Empty patch. Aborted." msgstr "空补丁。异常终止。" -#: builtin/add.c:262 +#: builtin/add.c:280 #, c-format msgid "Could not apply '%s'" msgstr "不能应用 '%s'" -#: builtin/add.c:270 +#: builtin/add.c:288 msgid "The following paths are ignored by one of your .gitignore files:\n" msgstr "下列路径根据您的一个 .gitignore 文件而被忽略：\n" -#: builtin/add.c:290 builtin/clean.c:910 builtin/fetch.c:162 builtin/mv.c:124 -#: builtin/prune-packed.c:56 builtin/pull.c:223 builtin/push.c:547 -#: builtin/remote.c:1345 builtin/rm.c:241 builtin/send-pack.c:165 +#: builtin/add.c:308 builtin/clean.c:910 builtin/fetch.c:163 builtin/mv.c:124 +#: builtin/prune-packed.c:56 builtin/pull.c:223 builtin/push.c:548 +#: builtin/remote.c:1344 builtin/rm.c:241 builtin/send-pack.c:165 msgid "dry run" msgstr "演习" -#: builtin/add.c:293 +#: builtin/add.c:311 msgid "interactive picking" msgstr "交互式拣选" -#: builtin/add.c:294 builtin/checkout.c:1480 builtin/reset.c:306 +#: builtin/add.c:312 builtin/checkout.c:1482 builtin/reset.c:307 msgid "select hunks interactively" msgstr "交互式挑选数据块" -#: builtin/add.c:295 +#: builtin/add.c:313 msgid "edit current diff and apply" msgstr "编辑当前差异并应用" -#: builtin/add.c:296 +#: builtin/add.c:314 msgid "allow adding otherwise ignored files" msgstr "允许添加忽略的文件" -#: builtin/add.c:297 +#: builtin/add.c:315 msgid "update tracked files" msgstr "更新已跟踪的文件" -#: builtin/add.c:298 +#: builtin/add.c:316 msgid "renormalize EOL of tracked files (implies -u)" msgstr "对已跟踪文件（暗含 -u）重新归一换行符" -#: builtin/add.c:299 +#: builtin/add.c:317 msgid "record only the fact that the path will be added later" msgstr "只记录，该路径稍后再添加" -#: builtin/add.c:300 +#: builtin/add.c:318 msgid "add changes from all tracked and untracked files" msgstr "添加所有改变的已跟踪文件和未跟踪文件" -#: builtin/add.c:303 +#: builtin/add.c:321 msgid "ignore paths removed in the working tree (same as --no-all)" msgstr "忽略工作区中移除的路径（和 --no-all 相同）" -#: builtin/add.c:305 +#: builtin/add.c:323 msgid "don't add, only refresh the index" msgstr "不添加，只刷新索引" -#: builtin/add.c:306 +#: builtin/add.c:324 msgid "just skip files which cannot be added because of errors" msgstr "跳过因出错不能添加的文件" -#: builtin/add.c:307 +#: builtin/add.c:325 msgid "check if - even missing - files are ignored in dry run" msgstr "检查在演习模式下文件（即使不存在）是否被忽略" -#: builtin/add.c:309 builtin/update-index.c:1002 +#: builtin/add.c:327 builtin/update-index.c:1004 msgid "override the executable bit of the listed files" msgstr "覆盖列表里文件的可执行位" -#: builtin/add.c:311 +#: builtin/add.c:329 msgid "warn when adding an embedded repository" msgstr "创建一个嵌入式仓库时给予警告" -#: builtin/add.c:326 +#: builtin/add.c:347 #, c-format msgid "" "You've added another git repository inside your current repository.\n" @@ -8580,9 +9047,8 @@ msgid "" "\n" "See \"git help submodule\" for more information." msgstr "" -"您在当前仓库中添加了另外一个Git仓库。克隆外层的仓库将不包含嵌入仓库的内容，并" -"且不知道该如何获取它。\n" -"如果您要添加一个子模组，使用：\n" +"您在当前仓库中添加了另一个Git仓库。克隆外层的仓库将不包含嵌入仓库的\n" +"内容，并且不知道该如何获取它。如果您要添加一个子模组，使用：\n" "\n" "\tgit submodule add %s\n" "\n" @@ -8592,39 +9058,57 @@ msgstr "" "\n" "参见 \"git help submodule\" 获取更多信息。" -#: builtin/add.c:354 +#: builtin/add.c:375 #, c-format msgid "adding embedded git repository: %s" msgstr "正在添加嵌入式 git 仓库：%s" -#: builtin/add.c:372 +#: builtin/add.c:393 #, c-format msgid "Use -f if you really want to add them.\n" msgstr "使用 -f 参数如果您确实要添加它们。\n" -#: builtin/add.c:379 +#: builtin/add.c:400 msgid "adding files failed" msgstr "添加文件失败" -#: builtin/add.c:419 +#: builtin/add.c:428 builtin/commit.c:348 +msgid "--pathspec-from-file is incompatible with --interactive/--patch" +msgstr "--pathspec-from-file 与 --interactive/--patch 不兼容" + +#: builtin/add.c:434 +msgid "--pathspec-from-file is incompatible with --edit" +msgstr "--pathspec-from-file 与 --edit 不兼容" + +#: builtin/add.c:446 msgid "-A and -u are mutually incompatible" msgstr "-A 和 -u 选项互斥" -#: builtin/add.c:426 +#: builtin/add.c:449 msgid "Option --ignore-missing can only be used together with --dry-run" msgstr "选项 --ignore-missing 只能和 --dry-run 同时使用" -#: builtin/add.c:430 +#: builtin/add.c:453 #, c-format msgid "--chmod param '%s' must be either -x or +x" msgstr "参数 --chmod 取值 '%s' 必须是 -x 或 +x" -#: builtin/add.c:445 +#: builtin/add.c:471 builtin/checkout.c:1648 builtin/commit.c:354 +#: builtin/reset.c:327 +msgid "--pathspec-from-file is incompatible with pathspec arguments" +msgstr "--pathspec-from-file 与路径表达式参数不兼容" + +#: builtin/add.c:478 builtin/checkout.c:1660 builtin/commit.c:360 +#: builtin/reset.c:333 +msgid "--pathspec-file-nul requires --pathspec-from-file" +msgstr "--pathspec-file-nul 需要 --pathspec-from-file" + +#: builtin/add.c:482 #, c-format msgid "Nothing specified, nothing added.\n" msgstr "没有指定文件，也没有文件被添加。\n" -#: builtin/add.c:446 +#: builtin/add.c:483 #, c-format msgid "Maybe you wanted to say 'git add .'?\n" msgstr "也许您想要执行 'git add .'？\n" @@ -8677,7 +9161,7 @@ msgstr "无效的时区偏移值" msgid "Patch format detection failed." msgstr "补丁格式探测失败。" -#: builtin/am.c:948 builtin/clone.c:406 +#: builtin/am.c:948 builtin/clone.c:409 #, c-format msgid "failed to create directory '%s'" msgstr "创建目录 '%s' 失败" @@ -8766,7 +9250,7 @@ msgstr "提交内容为：" msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all: " msgstr "应用？是[y]/否[n]/编辑[e]/查看补丁[v]/应用所有[a]：" -#: builtin/am.c:1695 builtin/commit.c:374 +#: builtin/am.c:1695 builtin/commit.c:394 msgid "unable to write index file" msgstr "无法写入索引文件" @@ -8814,8 +9298,8 @@ msgstr "" "您应该对已经冲突解决的每一个文件执行 'git add' 来标记已经完成。 \n" "你可以对 \"由他们删除\" 的文件执行 `git rm` 命令。" -#: builtin/am.c:1924 builtin/am.c:1928 builtin/am.c:1940 builtin/reset.c:329 -#: builtin/reset.c:337 +#: builtin/am.c:1924 builtin/am.c:1928 builtin/am.c:1940 builtin/reset.c:346 +#: builtin/reset.c:354 #, c-format msgid "Could not parse object '%s'." msgstr "不能解析对象 '%s'。" @@ -8856,7 +9340,7 @@ msgid "allow fall back on 3way merging if needed" msgstr "如果必要，允许使用三方合并。" #: builtin/am.c:2165 builtin/init-db.c:494 builtin/prune-packed.c:58 -#: builtin/repack.c:297 builtin/stash.c:812 +#: builtin/repack.c:304 builtin/stash.c:811 msgid "be quiet" msgstr "静默模式" @@ -8898,12 +9382,12 @@ msgstr "丢弃裁切线前的所有内容" msgid "pass it through git-apply" msgstr "传递给 git-apply" -#: builtin/am.c:2203 builtin/commit.c:1368 builtin/fmt-merge-msg.c:671 -#: builtin/fmt-merge-msg.c:674 builtin/grep.c:883 builtin/merge.c:249 -#: builtin/pull.c:160 builtin/pull.c:219 builtin/rebase.c:1442 -#: builtin/repack.c:308 builtin/repack.c:312 builtin/repack.c:314 +#: builtin/am.c:2203 builtin/commit.c:1386 builtin/fmt-merge-msg.c:673 +#: builtin/fmt-merge-msg.c:676 builtin/grep.c:883 builtin/merge.c:249 +#: builtin/pull.c:160 builtin/pull.c:219 builtin/rebase.c:1469 +#: builtin/repack.c:315 builtin/repack.c:319 builtin/repack.c:321 #: builtin/show-branch.c:650 builtin/show-ref.c:172 builtin/tag.c:403 -#: parse-options.h:150 parse-options.h:171 parse-options.h:312 +#: parse-options.h:154 parse-options.h:175 parse-options.h:316 msgid "n" msgstr "n" @@ -8952,13 +9436,13 @@ msgstr "将作者日期作为提交日期" msgid "use current timestamp for author date" msgstr "用当前时间作为作者日期" -#: builtin/am.c:2241 builtin/commit-tree.c:120 builtin/commit.c:1511 -#: builtin/merge.c:286 builtin/pull.c:194 builtin/rebase.c:490 -#: builtin/rebase.c:1483 builtin/revert.c:117 builtin/tag.c:418 +#: builtin/am.c:2241 builtin/commit-tree.c:120 builtin/commit.c:1507 +#: builtin/merge.c:286 builtin/pull.c:194 builtin/rebase.c:509 +#: builtin/rebase.c:1513 builtin/revert.c:117 builtin/tag.c:418 msgid "key-id" msgstr "key-id" -#: builtin/am.c:2242 builtin/rebase.c:491 builtin/rebase.c:1484 +#: builtin/am.c:2242 builtin/rebase.c:510 builtin/rebase.c:1514 msgid "GPG-sign commits" msgstr "使用 GPG 签名提交" @@ -9118,33 +9602,33 @@ msgstr "我们没有在二分查找。\n" msgid "'%s' is not a valid commit" msgstr "'%s' 不是一个有效的提交" -#: builtin/bisect--helper.c:174 +#: builtin/bisect--helper.c:172 #, c-format msgid "" "could not check out original HEAD '%s'. Try 'git bisect reset '." msgstr "不能检出原始 HEAD '%s'。尝试 'git bisect reset <提交>'。" -#: builtin/bisect--helper.c:215 +#: builtin/bisect--helper.c:216 #, c-format msgid "Bad bisect_write argument: %s" msgstr "坏的 bisect_write 参数：%s" -#: builtin/bisect--helper.c:220 +#: builtin/bisect--helper.c:221 #, c-format msgid "couldn't get the oid of the rev '%s'" msgstr "无法获取版本 '%s' 的对象 ID" -#: builtin/bisect--helper.c:232 +#: builtin/bisect--helper.c:233 #, c-format msgid "couldn't open the file '%s'" msgstr "无法打开文件 '%s'" -#: builtin/bisect--helper.c:258 +#: builtin/bisect--helper.c:259 #, c-format msgid "Invalid command: you're currently in a %s/%s bisect" msgstr "无效的命令：您当前正处于一个 %s/%s 二分查找中" -#: builtin/bisect--helper.c:285 +#: builtin/bisect--helper.c:286 #, c-format msgid "" "You need to give me at least one %s and %s revision.\n" @@ -9153,7 +9637,7 @@ msgstr "" "您需要给我至少一个 %s 和一个 %s 版本。\n" "为此您可以用 \"git bisect %s\" 和 \"git bisect %s\"。" -#: builtin/bisect--helper.c:289 +#: builtin/bisect--helper.c:290 #, c-format msgid "" "You need to start by \"git bisect start\".\n" @@ -9164,7 +9648,7 @@ msgstr "" "然后需要提供我至少一个 %s 和一个 %s 版本。\n" "为此您可以用 \"git bisect %s\" 和 \"git bisect %s\" 命令。" -#: builtin/bisect--helper.c:321 +#: builtin/bisect--helper.c:322 #, c-format msgid "bisecting only with a %s commit" msgstr "在只有一个 %s 提交的情况下二分查找" @@ -9174,22 +9658,22 @@ msgstr "在只有一个 %s 提交的情况下二分查找" #. translation. The program will only accept English input #. at this point. #. -#: builtin/bisect--helper.c:329 +#: builtin/bisect--helper.c:330 msgid "Are you sure [Y/n]? " msgstr "您确认么[Y/n]？ " -#: builtin/bisect--helper.c:376 +#: builtin/bisect--helper.c:377 msgid "no terms defined" msgstr "未定义术语" -#: builtin/bisect--helper.c:379 +#: builtin/bisect--helper.c:380 #, c-format msgid "" "Your current terms are %s for the old state\n" "and %s for the new state.\n" msgstr "您当前针对旧状态的术语是 %s，对新状态的术语是 %s。\n" -#: builtin/bisect--helper.c:389 +#: builtin/bisect--helper.c:390 #, c-format msgid "" "invalid argument %s for 'git bisect terms'.\n" @@ -9198,111 +9682,111 @@ msgstr "" "命令 'git bisect terms' 的参数 %s 无效。\n" "支持的选项有：--term-good|--term-old 和 --term-bad|--term-new。" -#: builtin/bisect--helper.c:475 +#: builtin/bisect--helper.c:476 #, c-format msgid "unrecognized option: '%s'" msgstr "未识别的选项：'%s'" -#: builtin/bisect--helper.c:479 +#: builtin/bisect--helper.c:480 #, c-format msgid "'%s' does not appear to be a valid revision" msgstr "'%s' 看起来不是一个有效的版本" -#: builtin/bisect--helper.c:511 +#: builtin/bisect--helper.c:512 msgid "bad HEAD - I need a HEAD" msgstr "坏的 HEAD - 我需要一个 HEAD" -#: builtin/bisect--helper.c:526 +#: builtin/bisect--helper.c:527 #, c-format msgid "checking out '%s' failed. Try 'git bisect start '." msgstr "检出 '%s' 失败。尝试 'git bisect start <有效分支>'。" -#: builtin/bisect--helper.c:547 +#: builtin/bisect--helper.c:548 msgid "won't bisect on cg-seek'ed tree" msgstr "不会在做了 cg-seek 的树上做二分查找" -#: builtin/bisect--helper.c:550 +#: builtin/bisect--helper.c:551 msgid "bad HEAD - strange symbolic ref" msgstr "坏的 HEAD - 奇怪的符号引用" -#: builtin/bisect--helper.c:574 +#: builtin/bisect--helper.c:575 #, c-format msgid "invalid ref: '%s'" msgstr "无效的引用：'%s'" -#: builtin/bisect--helper.c:630 +#: builtin/bisect--helper.c:631 msgid "perform 'git bisect next'" msgstr "执行 'git bisect next'" -#: builtin/bisect--helper.c:632 +#: builtin/bisect--helper.c:633 msgid "write the terms to .git/BISECT_TERMS" msgstr "将术语写入 .git/BISECT_TERMS" -#: builtin/bisect--helper.c:634 +#: builtin/bisect--helper.c:635 msgid "cleanup the bisection state" msgstr "清除二分查找状态" -#: builtin/bisect--helper.c:636 +#: builtin/bisect--helper.c:637 msgid "check for expected revs" msgstr "检查预期的版本" -#: builtin/bisect--helper.c:638 +#: builtin/bisect--helper.c:639 msgid "reset the bisection state" msgstr "清除二分查找状态" -#: builtin/bisect--helper.c:640 +#: builtin/bisect--helper.c:641 msgid "write out the bisection state in BISECT_LOG" msgstr "将二分查找的状态写入 BISECT_LOG" -#: builtin/bisect--helper.c:642 +#: builtin/bisect--helper.c:643 msgid "check and set terms in a bisection state" msgstr "在一个二分查找状态中检查和设置术语" -#: builtin/bisect--helper.c:644 +#: builtin/bisect--helper.c:645 msgid "check whether bad or good terms exist" msgstr "检查坏的或好的术语是否存在" -#: builtin/bisect--helper.c:646 +#: builtin/bisect--helper.c:647 msgid "print out the bisect terms" msgstr "打印二分查找术语" -#: builtin/bisect--helper.c:648 +#: builtin/bisect--helper.c:649 msgid "start the bisect session" msgstr "启动二分查找过程" -#: builtin/bisect--helper.c:650 +#: builtin/bisect--helper.c:651 msgid "update BISECT_HEAD instead of checking out the current commit" msgstr "更新 BISECT_HEAD 而非检出当前提交" -#: builtin/bisect--helper.c:652 +#: builtin/bisect--helper.c:653 msgid "no log for BISECT_WRITE" msgstr "BISECT_WRITE 无日志" -#: builtin/bisect--helper.c:669 +#: builtin/bisect--helper.c:670 msgid "--write-terms requires two arguments" msgstr "--write-terms 需要两个参数" -#: builtin/bisect--helper.c:673 +#: builtin/bisect--helper.c:674 msgid "--bisect-clean-state requires no arguments" msgstr "--bisect-clean-state 不带参数" -#: builtin/bisect--helper.c:680 +#: builtin/bisect--helper.c:681 msgid "--bisect-reset requires either no argument or a commit" msgstr "--bisect-reset 无需参数或者需要一个提交" -#: builtin/bisect--helper.c:684 +#: builtin/bisect--helper.c:685 msgid "--bisect-write requires either 4 or 5 arguments" msgstr "--bisect-write 需要 4 或 5 个参数" -#: builtin/bisect--helper.c:690 +#: builtin/bisect--helper.c:691 msgid "--check-and-set-terms requires 3 arguments" msgstr "--check-and-set-terms 需要 3 个参数" -#: builtin/bisect--helper.c:696 +#: builtin/bisect--helper.c:697 msgid "--bisect-next-check requires 2 or 3 arguments" msgstr "--bisect-next-check 需要 2 或 3 个参数" -#: builtin/bisect--helper.c:702 +#: builtin/bisect--helper.c:703 msgid "--bisect-terms requires 0 or 1 argument" msgstr "--bisect-terms 需要 0 或 1 个参数" @@ -9401,7 +9885,7 @@ msgstr "显示作者的邮箱而不是名字（默认：关闭）" msgid "Ignore whitespace differences" msgstr "忽略空白差异" -#: builtin/blame.c:860 builtin/log.c:1630 +#: builtin/blame.c:860 builtin/log.c:1702 msgid "rev" msgstr "版本" @@ -9421,43 +9905,39 @@ msgstr "使用颜色间隔输出与前一行不同的重复元信息" msgid "color lines by age" msgstr "依据时间着色" -#: builtin/blame.c:870 -msgid "Use an experimental heuristic to improve diffs" -msgstr "使用一个试验性的启发式算法改进差异显示" - -#: builtin/blame.c:872 +#: builtin/blame.c:864 msgid "Spend extra cycles to find better match" msgstr "花费额外的循环来找到更好的匹配" -#: builtin/blame.c:873 +#: builtin/blame.c:865 msgid "Use revisions from instead of calling git-rev-list" msgstr "使用来自 <文件> 的修订集而不是调用 git-rev-list" -#: builtin/blame.c:874 +#: builtin/blame.c:866 msgid "Use 's contents as the final image" msgstr "使用 <文件> 的内容作为最终的图片" -#: builtin/blame.c:875 builtin/blame.c:876 +#: builtin/blame.c:867 builtin/blame.c:868 msgid "score" msgstr "得分" -#: builtin/blame.c:875 +#: builtin/blame.c:867 msgid "Find line copies within and across files" msgstr "找到文件内及跨文件的行拷贝" -#: builtin/blame.c:876 +#: builtin/blame.c:868 msgid "Find line movements within and across files" msgstr "找到文件内及跨文件的行移动" -#: builtin/blame.c:877 +#: builtin/blame.c:869 msgid "n,m" msgstr "n,m" -#: builtin/blame.c:877 +#: builtin/blame.c:869 msgid "Process only line range n,m, counting from 1" msgstr "只处理行范围在 n 和 m 之间的，从 1 开始" -#: builtin/blame.c:929 +#: builtin/blame.c:921 msgid "--progress can't be used with --incremental or porcelain formats" msgstr "--progress 不能和 --incremental 或 --porcelain 同时使用" @@ -9469,18 +9949,18 @@ msgstr "--progress 不能和 --incremental 或 --porcelain 同时使用" #. your language may need more or fewer display #. columns. #. -#: builtin/blame.c:980 +#: builtin/blame.c:972 msgid "4 years, 11 months ago" msgstr "4 年 11 个月前" -#: builtin/blame.c:1087 +#: builtin/blame.c:1079 #, c-format msgid "file %s has only %lu line" msgid_plural "file %s has only %lu lines" msgstr[0] "文件 %s 只有 %lu 行" msgstr[1] "文件 %s 只有 %lu 行" -#: builtin/blame.c:1133 +#: builtin/blame.c:1125 msgid "Blaming lines" msgstr "追踪代码行" @@ -9691,7 +10171,7 @@ msgstr "设置跟踪模式（参见 git-pull(1)）" msgid "do not use" msgstr "不要使用" -#: builtin/branch.c:626 builtin/rebase.c:486 +#: builtin/branch.c:626 builtin/rebase.c:505 msgid "upstream" msgstr "上游" @@ -9700,7 +10180,7 @@ msgid "change the upstream info" msgstr "改变上游信息" #: builtin/branch.c:627 -msgid "Unset the upstream info" +msgid "unset the upstream info" msgstr "取消上游信息的设置" #: builtin/branch.c:628 @@ -9802,7 +10282,7 @@ msgstr "排序和过滤属于大小写不敏感" msgid "format to use for the output" msgstr "输出格式" -#: builtin/branch.c:684 builtin/clone.c:760 +#: builtin/branch.c:684 builtin/clone.c:784 msgid "HEAD not found below refs/heads!" msgstr "HEAD 没有位于 /refs/heads 之下！" @@ -9881,26 +10361,71 @@ msgstr "" "'git branch' 的 -a 和 -r 选项不带一个分支名。\n" "您是否想要使用：-a|-r --list <模式>？" -#: builtin/branch.c:845 -msgid "" -"the '--set-upstream' option is no longer supported. Please use '--track' or " -"'--set-upstream-to' instead." -msgstr "" -"不再支持选项 '--set-upstream'。请使用 '--track' 或 '--set-upstream-to'。" +#: builtin/branch.c:845 +msgid "" +"the '--set-upstream' option is no longer supported. Please use '--track' or " +"'--set-upstream-to' instead." +msgstr "" +"不再支持选项 '--set-upstream'。请使用 '--track' 或 '--set-upstream-to'。" + +#: builtin/bundle.c:15 builtin/bundle.c:23 +msgid "git bundle create [] " +msgstr "git bundle create [<选项>] <文件> " + +#: builtin/bundle.c:16 builtin/bundle.c:28 +msgid "git bundle verify [] " +msgstr "git bundle verify [<选项>] <文件>" + +#: builtin/bundle.c:17 builtin/bundle.c:33 +msgid "git bundle list-heads [...]" +msgstr "git bundle list-heads <文件> [<引用名>...]" + +#: builtin/bundle.c:18 builtin/bundle.c:38 +msgid "git bundle unbundle [...]" +msgstr "git bundle unbundle <文件> [<引用名>...]" + +#: builtin/bundle.c:66 builtin/pack-objects.c:3228 +msgid "do not show progress meter" +msgstr "不显示进度表" + +#: builtin/bundle.c:68 builtin/pack-objects.c:3230 +msgid "show progress meter" +msgstr "显示进度表" + +#: builtin/bundle.c:70 builtin/pack-objects.c:3232 +msgid "show progress meter during object writing phase" +msgstr "在对象写入阶段显示进度表" + +#: builtin/bundle.c:73 builtin/pack-objects.c:3235 +msgid "similar to --all-progress when progress meter is shown" +msgstr "当进度表显示时类似于 --all-progress" -#: builtin/bundle.c:45 +#: builtin/bundle.c:93 +msgid "Need a repository to create a bundle." +msgstr "需要一个仓库来创建包。" + +#: builtin/bundle.c:104 +msgid "do not show bundle details" +msgstr "不显示 bundle 细节" + +#: builtin/bundle.c:119 #, c-format msgid "%s is okay\n" msgstr "%s 可以\n" -#: builtin/bundle.c:58 -msgid "Need a repository to create a bundle." -msgstr "需要一个仓库来创建包。" - -#: builtin/bundle.c:62 +#: builtin/bundle.c:160 msgid "Need a repository to unbundle." msgstr "需要一个仓库来解包。" +#: builtin/bundle.c:168 builtin/remote.c:1609 +msgid "be verbose; must be placed before a subcommand" +msgstr "冗长输出；必须置于子命令之前" + +#: builtin/bundle.c:190 builtin/remote.c:1640 +#, c-format +msgid "Unknown subcommand: %s" +msgstr "未知子命令：%s" + #: builtin/cat-file.c:595 msgid "" "git cat-file (-t [--allow-unknown-type] | -s [--allow-unknown-type] | -e | -" @@ -9949,7 +10474,7 @@ msgstr "对于数据对象，对其内容做文本转换" msgid "for blob objects, run filters on object's content" msgstr "对于数据对象，对其内容做过滤" -#: builtin/cat-file.c:645 git-submodule.sh:936 +#: builtin/cat-file.c:645 git-submodule.sh:992 msgid "blob" msgstr "数据对象" @@ -10009,7 +10534,7 @@ msgstr "从标准输入读出文件名" msgid "terminate input and output records by a NUL character" msgstr "输入和输出的记录使用 NUL 字符终结" -#: builtin/check-ignore.c:21 builtin/checkout.c:1433 builtin/gc.c:537 +#: builtin/check-ignore.c:21 builtin/checkout.c:1435 builtin/gc.c:537 #: builtin/worktree.c:506 msgid "suppress progress reporting" msgstr "不显示进度报告" @@ -10100,8 +10625,8 @@ msgid "write the content to temporary files" msgstr "将内容写入临时文件" #: builtin/checkout-index.c:178 builtin/column.c:31 -#: builtin/submodule--helper.c:1373 builtin/submodule--helper.c:1376 -#: builtin/submodule--helper.c:1384 builtin/submodule--helper.c:1857 +#: builtin/submodule--helper.c:1385 builtin/submodule--helper.c:1388 +#: builtin/submodule--helper.c:1396 builtin/submodule--helper.c:1882 #: builtin/worktree.c:679 msgid "string" msgstr "字符串" @@ -10130,98 +10655,98 @@ msgstr "git switch [<选项>] [<分支>]" msgid "git restore [] [--source=] ..." msgstr "git restore [<选项>] [--source=<分支>] <文件>..." -#: builtin/checkout.c:173 builtin/checkout.c:212 +#: builtin/checkout.c:175 builtin/checkout.c:214 #, c-format msgid "path '%s' does not have our version" msgstr "路径 '%s' 没有我们的版本" -#: builtin/checkout.c:175 builtin/checkout.c:214 +#: builtin/checkout.c:177 builtin/checkout.c:216 #, c-format msgid "path '%s' does not have their version" msgstr "路径 '%s' 没有他们的版本" -#: builtin/checkout.c:191 +#: builtin/checkout.c:193 #, c-format msgid "path '%s' does not have all necessary versions" msgstr "路径 '%s' 没有全部必需的版本" -#: builtin/checkout.c:241 +#: builtin/checkout.c:243 #, c-format msgid "path '%s' does not have necessary versions" msgstr "路径 '%s' 没有必需的版本" -#: builtin/checkout.c:259 +#: builtin/checkout.c:261 #, c-format msgid "path '%s': cannot merge" msgstr "path '%s'：无法合并" -#: builtin/checkout.c:275 +#: builtin/checkout.c:277 #, c-format msgid "Unable to add merge result for '%s'" msgstr "无法为 '%s' 添加合并结果" -#: builtin/checkout.c:375 +#: builtin/checkout.c:377 #, c-format msgid "Recreated %d merge conflict" msgid_plural "Recreated %d merge conflicts" msgstr[0] "重新创建了 %d 个合并冲突" msgstr[1] "重新创建了 %d 个合并冲突" -#: builtin/checkout.c:380 +#: builtin/checkout.c:382 #, c-format msgid "Updated %d path from %s" msgid_plural "Updated %d paths from %s" msgstr[0] "从 %2$s 更新了 %1$d 个路径" msgstr[1] "从 %2$s 更新了 %1$d 个路径" -#: builtin/checkout.c:387 +#: builtin/checkout.c:389 #, c-format msgid "Updated %d path from the index" msgid_plural "Updated %d paths from the index" msgstr[0] "从索引区更新了 %d 个路径" msgstr[1] "从索引区更新了 %d 个路径" -#: builtin/checkout.c:410 builtin/checkout.c:413 builtin/checkout.c:416 -#: builtin/checkout.c:420 +#: builtin/checkout.c:412 builtin/checkout.c:415 builtin/checkout.c:418 +#: builtin/checkout.c:422 #, c-format msgid "'%s' cannot be used with updating paths" msgstr "'%s' 不能在更新路径时使用" -#: builtin/checkout.c:423 builtin/checkout.c:426 +#: builtin/checkout.c:425 builtin/checkout.c:428 #, c-format msgid "'%s' cannot be used with %s" msgstr "'%s' 不能和 %s 同时使用" -#: builtin/checkout.c:430 +#: builtin/checkout.c:432 #, c-format msgid "Cannot update paths and switch to branch '%s' at the same time." msgstr "不能同时更新路径并切换到分支'%s'。" -#: builtin/checkout.c:434 +#: builtin/checkout.c:436 #, c-format msgid "neither '%s' or '%s' is specified" msgstr "'%s' 或 '%s' 都没有指定" -#: builtin/checkout.c:438 +#: builtin/checkout.c:440 #, c-format msgid "'%s' must be used when '%s' is not specified" msgstr "未指定 '%2$s' 时，必须使用 '%1$s'" -#: builtin/checkout.c:443 builtin/checkout.c:448 +#: builtin/checkout.c:445 builtin/checkout.c:450 #, c-format msgid "'%s' or '%s' cannot be used with %s" msgstr "'%s' 或 '%s' 不能和 %s 一起使用" -#: builtin/checkout.c:507 builtin/checkout.c:514 +#: builtin/checkout.c:509 builtin/checkout.c:516 #, c-format msgid "path '%s' is unmerged" msgstr "路径 '%s' 未合并" -#: builtin/checkout.c:680 +#: builtin/checkout.c:682 builtin/sparse-checkout.c:82 msgid "you need to resolve your current index first" msgstr "您需要先解决当前索引的冲突" -#: builtin/checkout.c:730 +#: builtin/checkout.c:732 #, c-format msgid "" "cannot continue with staged changes in the following files:\n" @@ -10230,51 +10755,51 @@ msgstr "" "不能继续，下列文件有暂存的修改：\n" "%s" -#: builtin/checkout.c:833 +#: builtin/checkout.c:835 #, c-format msgid "Can not do reflog for '%s': %s\n" msgstr "不能对 '%s' 执行 reflog 操作：%s\n" -#: builtin/checkout.c:875 +#: builtin/checkout.c:877 msgid "HEAD is now at" msgstr "HEAD 目前位于" -#: builtin/checkout.c:879 builtin/clone.c:713 +#: builtin/checkout.c:881 builtin/clone.c:716 msgid "unable to update HEAD" msgstr "不能更新 HEAD" -#: builtin/checkout.c:883 +#: builtin/checkout.c:885 #, c-format msgid "Reset branch '%s'\n" msgstr "重置分支 '%s'\n" -#: builtin/checkout.c:886 +#: builtin/checkout.c:888 #, c-format msgid "Already on '%s'\n" msgstr "已经位于 '%s'\n" -#: builtin/checkout.c:890 +#: builtin/checkout.c:892 #, c-format msgid "Switched to and reset branch '%s'\n" msgstr "切换并重置分支 '%s'\n" -#: builtin/checkout.c:892 builtin/checkout.c:1289 +#: builtin/checkout.c:894 builtin/checkout.c:1291 #, c-format msgid "Switched to a new branch '%s'\n" msgstr "切换到一个新分支 '%s'\n" -#: builtin/checkout.c:894 +#: builtin/checkout.c:896 #, c-format msgid "Switched to branch '%s'\n" msgstr "切换到分支 '%s'\n" # 译者：注意保持前导空格 -#: builtin/checkout.c:945 +#: builtin/checkout.c:947 #, c-format msgid " ... and %d more.\n" msgstr " ... 及其它 %d 个。\n" -#: builtin/checkout.c:951 +#: builtin/checkout.c:953 #, c-format msgid "" "Warning: you are leaving %d commit behind, not connected to\n" @@ -10295,7 +10820,7 @@ msgstr[1] "" "\n" "%s\n" -#: builtin/checkout.c:970 +#: builtin/checkout.c:972 #, c-format msgid "" "If you want to keep it by creating a new branch, this may be a good time\n" @@ -10322,28 +10847,28 @@ msgstr[1] "" " git branch <新分支名> %s\n" "\n" -#: builtin/checkout.c:1005 +#: builtin/checkout.c:1007 msgid "internal error in revision walk" msgstr "在版本遍历时遇到内部错误" -#: builtin/checkout.c:1009 +#: builtin/checkout.c:1011 msgid "Previous HEAD position was" msgstr "之前的 HEAD 位置是" -#: builtin/checkout.c:1049 builtin/checkout.c:1284 +#: builtin/checkout.c:1051 builtin/checkout.c:1286 msgid "You are on a branch yet to be born" msgstr "您位于一个尚未初始化的分支" -#: builtin/checkout.c:1176 +#: builtin/checkout.c:1178 msgid "only one reference expected" msgstr "预期只有一个引用" -#: builtin/checkout.c:1193 +#: builtin/checkout.c:1195 #, c-format msgid "only one reference expected, %d given." msgstr "应只有一个引用，却给出了 %d 个" -#: builtin/checkout.c:1230 +#: builtin/checkout.c:1232 #, c-format msgid "" "'%s' could be both a local file and a tracking branch.\n" @@ -10352,37 +10877,37 @@ msgstr "" "'%s' 既可以是一个本地文件，也可以是一个跟踪分支。\n" "请使用 --（和可选的 --no-guess）来消除歧义" -#: builtin/checkout.c:1243 builtin/worktree.c:290 builtin/worktree.c:455 +#: builtin/checkout.c:1245 builtin/worktree.c:290 builtin/worktree.c:455 #, c-format msgid "invalid reference: %s" msgstr "无效引用：%s" -#: builtin/checkout.c:1256 builtin/checkout.c:1618 +#: builtin/checkout.c:1258 builtin/checkout.c:1622 #, c-format msgid "reference is not a tree: %s" msgstr "引用不是一个树：%s" -#: builtin/checkout.c:1303 +#: builtin/checkout.c:1305 #, c-format msgid "a branch is expected, got tag '%s'" msgstr "期望一个分支，得到标签 '%s'" -#: builtin/checkout.c:1305 +#: builtin/checkout.c:1307 #, c-format msgid "a branch is expected, got remote branch '%s'" msgstr "期望一个分支，得到远程分支 '%s'" -#: builtin/checkout.c:1306 builtin/checkout.c:1314 +#: builtin/checkout.c:1308 builtin/checkout.c:1316 #, c-format msgid "a branch is expected, got '%s'" msgstr "期望一个分支，得到 '%s'" -#: builtin/checkout.c:1309 +#: builtin/checkout.c:1311 #, c-format msgid "a branch is expected, got commit '%s'" msgstr "期望一个分支，得到提交 '%s'" -#: builtin/checkout.c:1325 +#: builtin/checkout.c:1327 msgid "" "cannot switch branch while merging\n" "Consider \"git merge --quit\" or \"git worktree add\"." @@ -10390,7 +10915,7 @@ msgstr "" "不能在合并时切换分支\n" "考虑使用 \"git merge --quit\" 或 \"git worktree add\"。" -#: builtin/checkout.c:1329 +#: builtin/checkout.c:1331 msgid "" "cannot switch branch in the middle of an am session\n" "Consider \"git am --quit\" or \"git worktree add\"." @@ -10398,7 +10923,7 @@ msgstr "" "不能在一个 am 会话期间切换分支\n" "考虑使用 \"git am --quit\" 或 \"git worktree add\"。" -#: builtin/checkout.c:1333 +#: builtin/checkout.c:1335 msgid "" "cannot switch branch while rebasing\n" "Consider \"git rebase --quit\" or \"git worktree add\"." @@ -10406,7 +10931,7 @@ msgstr "" "不能在变基时切换分支\n" "考虑使用 \"git rebase --quit\" 或 \"git worktree add\"。" -#: builtin/checkout.c:1337 +#: builtin/checkout.c:1339 msgid "" "cannot switch branch while cherry-picking\n" "Consider \"git cherry-pick --quit\" or \"git worktree add\"." @@ -10414,7 +10939,7 @@ msgstr "" "不能在拣选时切换分支\n" "考虑使用 \"git cherry-pick --quit\" 或 \"git worktree add\"。" -#: builtin/checkout.c:1341 +#: builtin/checkout.c:1343 msgid "" "cannot switch branch while reverting\n" "Consider \"git revert --quit\" or \"git worktree add\"." @@ -10422,122 +10947,119 @@ msgstr "" "不能在还原时切换分支\n" "考虑使用 \"git revert --quit\" 或 \"git worktree add\"。" -#: builtin/checkout.c:1345 +#: builtin/checkout.c:1347 msgid "you are switching branch while bisecting" msgstr "您在执行二分查找时切换分支" -#: builtin/checkout.c:1352 +#: builtin/checkout.c:1354 msgid "paths cannot be used with switching branches" msgstr "路径不能和切换分支同时使用" -#: builtin/checkout.c:1355 builtin/checkout.c:1359 builtin/checkout.c:1363 +#: builtin/checkout.c:1357 builtin/checkout.c:1361 builtin/checkout.c:1365 #, c-format msgid "'%s' cannot be used with switching branches" msgstr "'%s' 不能和切换分支同时使用" -#: builtin/checkout.c:1367 builtin/checkout.c:1370 builtin/checkout.c:1373 -#: builtin/checkout.c:1378 builtin/checkout.c:1383 +#: builtin/checkout.c:1369 builtin/checkout.c:1372 builtin/checkout.c:1375 +#: builtin/checkout.c:1380 builtin/checkout.c:1385 #, c-format msgid "'%s' cannot be used with '%s'" msgstr "'%s' 不能和 '%s' 同时使用" -#: builtin/checkout.c:1380 +#: builtin/checkout.c:1382 #, c-format msgid "'%s' cannot take " msgstr "'%s' 不带 <起始点>" -#: builtin/checkout.c:1388 +#: builtin/checkout.c:1390 #, c-format msgid "Cannot switch branch to a non-commit '%s'" msgstr "不能切换分支到一个非提交 '%s'" -#: builtin/checkout.c:1395 +#: builtin/checkout.c:1397 msgid "missing branch or commit argument" msgstr "缺少分支或提交参数" -#: builtin/checkout.c:1437 builtin/clone.c:90 builtin/commit-graph.c:59 -#: builtin/commit-graph.c:180 builtin/fetch.c:166 builtin/merge.c:285 -#: builtin/pull.c:138 builtin/push.c:562 builtin/send-pack.c:174 +#: builtin/checkout.c:1439 builtin/clone.c:91 builtin/commit-graph.c:52 +#: builtin/commit-graph.c:113 builtin/fetch.c:167 builtin/merge.c:285 +#: builtin/multi-pack-index.c:27 builtin/pull.c:138 builtin/push.c:563 +#: builtin/send-pack.c:174 msgid "force progress reporting" msgstr "强制显示进度报告" -#: builtin/checkout.c:1438 +#: builtin/checkout.c:1440 msgid "perform a 3-way merge with the new branch" msgstr "和新的分支执行三方合并" -#: builtin/checkout.c:1439 builtin/log.c:1618 parse-options.h:318 +#: builtin/checkout.c:1441 builtin/log.c:1690 parse-options.h:322 msgid "style" msgstr "风格" -#: builtin/checkout.c:1440 +#: builtin/checkout.c:1442 msgid "conflict style (merge or diff3)" msgstr "冲突输出风格（merge 或 diff3）" -#: builtin/checkout.c:1452 builtin/worktree.c:503 +#: builtin/checkout.c:1454 builtin/worktree.c:503 msgid "detach HEAD at named commit" msgstr "HEAD 从指定的提交分离" -#: builtin/checkout.c:1453 +#: builtin/checkout.c:1455 msgid "set upstream info for new branch" msgstr "为新的分支设置上游信息" -#: builtin/checkout.c:1455 +#: builtin/checkout.c:1457 msgid "force checkout (throw away local modifications)" msgstr "强制检出（丢弃本地修改）" -#: builtin/checkout.c:1457 +#: builtin/checkout.c:1459 msgid "new-branch" msgstr "新分支" -#: builtin/checkout.c:1457 +#: builtin/checkout.c:1459 msgid "new unparented branch" msgstr "新的没有父提交的分支" -#: builtin/checkout.c:1459 builtin/merge.c:288 +#: builtin/checkout.c:1461 builtin/merge.c:288 msgid "update ignored files (default)" msgstr "更新忽略的文件（默认）" -#: builtin/checkout.c:1462 +#: builtin/checkout.c:1464 msgid "do not check if another worktree is holding the given ref" msgstr "不检查指定的引用是否被其他工作区所占用" -#: builtin/checkout.c:1475 +#: builtin/checkout.c:1477 msgid "checkout our version for unmerged files" msgstr "对尚未合并的文件检出我们的版本" -#: builtin/checkout.c:1478 +#: builtin/checkout.c:1480 msgid "checkout their version for unmerged files" msgstr "对尚未合并的文件检出他们的版本" -#: builtin/checkout.c:1482 +#: builtin/checkout.c:1484 msgid "do not limit pathspecs to sparse entries only" msgstr "对路径不做稀疏检出的限制" -#: builtin/checkout.c:1533 +#: builtin/checkout.c:1537 msgid "-b, -B and --orphan are mutually exclusive" msgstr "-b、-B 和 --orphan 是互斥的" -#: builtin/checkout.c:1536 +#: builtin/checkout.c:1540 msgid "-p and --overlay are mutually exclusive" msgstr "-p 和 --overlay 互斥" -#: builtin/checkout.c:1573 +#: builtin/checkout.c:1577 msgid "--track needs a branch name" msgstr "--track 需要一个分支名" -#: builtin/checkout.c:1578 +#: builtin/checkout.c:1582 msgid "missing branch name; try -b" msgstr "缺少分支名，尝试 -b" -#: builtin/checkout.c:1611 +#: builtin/checkout.c:1615 #, c-format msgid "could not resolve %s" msgstr "无法解析 %s" -#: builtin/checkout.c:1623 -msgid "you must specify path(s) to restore" -msgstr "您必须指定一个要恢复的路径" - #: builtin/checkout.c:1631 msgid "invalid path specification" msgstr "无效的路径规格" @@ -10552,14 +11074,26 @@ msgstr "'%s' 不是一个提交，不能基于它创建分支 '%s'" msgid "git checkout: --detach does not take a path argument '%s'" msgstr "git checkout：--detach 不能接收路径参数 '%s'" -#: builtin/checkout.c:1646 +#: builtin/checkout.c:1651 +msgid "--pathspec-from-file is incompatible with --detach" +msgstr "--pathspec-from-file 与 --detach 不兼容" + +#: builtin/checkout.c:1654 builtin/reset.c:324 +msgid "--pathspec-from-file is incompatible with --patch" +msgstr "--pathspec-from-file 与 --patch 不兼容" + +#: builtin/checkout.c:1665 msgid "" "git checkout: --ours/--theirs, --force and --merge are incompatible when\n" "checking out of the index." msgstr "" "git checkout：在从索引检出时，--ours/--theirs、--force 和 --merge 不兼容。" -#: builtin/checkout.c:1666 +#: builtin/checkout.c:1670 +msgid "you must specify path(s) to restore" +msgstr "您必须指定一个要恢复的路径" + +#: builtin/checkout.c:1689 #, c-format msgid "" "'%s' matched more than one remote tracking branch.\n" @@ -10587,65 +11121,65 @@ msgstr "" "如果您总是喜欢使用模糊的简短分支名 ，而不喜欢如 'origin' 的远程\n" "仓库名，可以在配置中设置 checkout.defaultRemote=origin。" -#: builtin/checkout.c:1691 builtin/checkout.c:1693 builtin/checkout.c:1742 -#: builtin/checkout.c:1744 builtin/clone.c:120 builtin/remote.c:169 +#: builtin/checkout.c:1714 builtin/checkout.c:1716 builtin/checkout.c:1765 +#: builtin/checkout.c:1767 builtin/clone.c:121 builtin/remote.c:169 #: builtin/remote.c:171 builtin/worktree.c:499 builtin/worktree.c:501 msgid "branch" msgstr "分支" -#: builtin/checkout.c:1692 +#: builtin/checkout.c:1715 msgid "create and checkout a new branch" msgstr "创建并检出一个新的分支" -#: builtin/checkout.c:1694 +#: builtin/checkout.c:1717 msgid "create/reset and checkout a branch" msgstr "创建/重置并检出一个分支" -#: builtin/checkout.c:1695 +#: builtin/checkout.c:1718 msgid "create reflog for new branch" msgstr "为新的分支创建引用日志" -#: builtin/checkout.c:1697 +#: builtin/checkout.c:1720 msgid "second guess 'git checkout ' (default)" msgstr "二次猜测 'git checkout <无此分支>'（默认）" -#: builtin/checkout.c:1698 +#: builtin/checkout.c:1721 msgid "use overlay mode (default)" msgstr "使用叠加模式（默认）" -#: builtin/checkout.c:1743 +#: builtin/checkout.c:1766 msgid "create and switch to a new branch" msgstr "创建并切换一个新分支" -#: builtin/checkout.c:1745 +#: builtin/checkout.c:1768 msgid "create/reset and switch to a branch" msgstr "创建/重置并切换一个分支" -#: builtin/checkout.c:1747 +#: builtin/checkout.c:1770 msgid "second guess 'git switch '" msgstr "二次猜测 'git switch <无此分支>'" -#: builtin/checkout.c:1749 +#: builtin/checkout.c:1772 msgid "throw away local modifications" msgstr "丢弃本地修改" -#: builtin/checkout.c:1781 +#: builtin/checkout.c:1804 msgid "which tree-ish to checkout from" msgstr "要检出哪一个树" -#: builtin/checkout.c:1783 +#: builtin/checkout.c:1806 msgid "restore the index" msgstr "恢复索引" -#: builtin/checkout.c:1785 +#: builtin/checkout.c:1808 msgid "restore the working tree (default)" msgstr "恢复工作区（默认）" -#: builtin/checkout.c:1787 +#: builtin/checkout.c:1810 msgid "ignore unmerged entries" msgstr "忽略未合并条目" -#: builtin/checkout.c:1788 +#: builtin/checkout.c:1811 msgid "use overlay mode" msgstr "使用叠加模式" @@ -10685,7 +11219,7 @@ msgstr "删除 %s 失败" msgid "could not lstat %s\n" msgstr "不能对 %s 调用 lstat\n" -#: builtin/clean.c:301 git-add--interactive.perl:593 +#: builtin/clean.c:301 git-add--interactive.perl:595 #, c-format msgid "" "Prompt help:\n" @@ -10698,7 +11232,7 @@ msgstr "" "foo - 通过唯一前缀选择一个选项\n" " - （空）什么也不选择\n" -#: builtin/clean.c:305 git-add--interactive.perl:602 +#: builtin/clean.c:305 git-add--interactive.perl:604 #, c-format msgid "" "Prompt help:\n" @@ -10719,8 +11253,8 @@ msgstr "" "* - 选择所有选项\n" " - （空）结束选择\n" -#: builtin/clean.c:521 git-add--interactive.perl:568 -#: git-add--interactive.perl:573 +#: builtin/clean.c:521 git-add--interactive.perl:570 +#: git-add--interactive.perl:575 #, c-format, perl-format msgid "Huh (%s)?\n" msgstr "嗯（%s）？\n" @@ -10745,11 +11279,6 @@ msgstr "选择要删除的条目" msgid "Remove %s [y/N]? " msgstr "删除 %s [y/N]？" -#: builtin/clean.c:787 git-add--interactive.perl:1763 -#, c-format -msgid "Bye.\n" -msgstr "再见。\n" - #: builtin/clean.c:795 msgid "" "clean - start cleaning\n" @@ -10768,14 +11297,6 @@ msgstr "" "help - 显示本帮助\n" "? - 显示如何在提示符下选择的帮助" -#: builtin/clean.c:822 git-add--interactive.perl:1849 -msgid "*** Commands ***" -msgstr "*** 命令 ***" - -#: builtin/clean.c:823 git-add--interactive.perl:1846 -msgid "What now" -msgstr "请选择" - #: builtin/clean.c:831 msgid "Would remove the following item:" msgid_plural "Would remove the following items:" @@ -10803,8 +11324,8 @@ msgid "remove whole directories" msgstr "删除整个目录" #: builtin/clean.c:915 builtin/describe.c:548 builtin/describe.c:550 -#: builtin/grep.c:901 builtin/log.c:176 builtin/log.c:178 -#: builtin/ls-files.c:557 builtin/name-rev.c:417 builtin/name-rev.c:419 +#: builtin/grep.c:901 builtin/log.c:177 builtin/log.c:179 +#: builtin/ls-files.c:557 builtin/name-rev.c:464 builtin/name-rev.c:466 #: builtin/show-ref.c:179 msgid "pattern" msgstr "模式" @@ -10843,156 +11364,160 @@ msgstr "" msgid "git clone [] [--] []" msgstr "git clone [<选项>] [--] <仓库> [<路径>]" -#: builtin/clone.c:92 +#: builtin/clone.c:93 msgid "don't create a checkout" msgstr "不创建一个检出" -#: builtin/clone.c:93 builtin/clone.c:95 builtin/init-db.c:489 +#: builtin/clone.c:94 builtin/clone.c:96 builtin/init-db.c:489 msgid "create a bare repository" msgstr "创建一个纯仓库" -#: builtin/clone.c:97 +#: builtin/clone.c:98 msgid "create a mirror repository (implies bare)" msgstr "创建一个镜像仓库（也是纯仓库）" -#: builtin/clone.c:99 +#: builtin/clone.c:100 msgid "to clone from a local repository" msgstr "从本地仓库克隆" -#: builtin/clone.c:101 +#: builtin/clone.c:102 msgid "don't use local hardlinks, always copy" msgstr "不使用本地硬链接，始终复制" -#: builtin/clone.c:103 +#: builtin/clone.c:104 msgid "setup as shared repository" msgstr "设置为共享仓库" -#: builtin/clone.c:106 +#: builtin/clone.c:107 msgid "pathspec" msgstr "路径规格" -#: builtin/clone.c:106 +#: builtin/clone.c:107 msgid "initialize submodules in the clone" msgstr "在克隆时初始化子模组" -#: builtin/clone.c:109 +#: builtin/clone.c:110 msgid "number of submodules cloned in parallel" msgstr "并发克隆的子模组的数量" -#: builtin/clone.c:110 builtin/init-db.c:486 +#: builtin/clone.c:111 builtin/init-db.c:486 msgid "template-directory" msgstr "模板目录" -#: builtin/clone.c:111 builtin/init-db.c:487 +#: builtin/clone.c:112 builtin/init-db.c:487 msgid "directory from which templates will be used" msgstr "模板目录将被使用" -#: builtin/clone.c:113 builtin/clone.c:115 builtin/submodule--helper.c:1380 -#: builtin/submodule--helper.c:1860 +#: builtin/clone.c:114 builtin/clone.c:116 builtin/submodule--helper.c:1392 +#: builtin/submodule--helper.c:1885 msgid "reference repository" msgstr "参考仓库" -#: builtin/clone.c:117 builtin/submodule--helper.c:1382 -#: builtin/submodule--helper.c:1862 +#: builtin/clone.c:118 builtin/submodule--helper.c:1394 +#: builtin/submodule--helper.c:1887 msgid "use --reference only while cloning" msgstr "仅在克隆时参考 --reference 指向的本地仓库" -#: builtin/clone.c:118 builtin/column.c:27 builtin/merge-file.c:46 -#: builtin/pack-objects.c:3294 builtin/repack.c:320 +#: builtin/clone.c:119 builtin/column.c:27 builtin/merge-file.c:46 +#: builtin/pack-objects.c:3294 builtin/repack.c:327 msgid "name" msgstr "名称" -#: builtin/clone.c:119 +#: builtin/clone.c:120 msgid "use instead of 'origin' to track upstream" msgstr "使用 <名称> 而不是 'origin' 去跟踪上游" -#: builtin/clone.c:121 +#: builtin/clone.c:122 msgid "checkout instead of the remote's HEAD" msgstr "检出 <分支> 而不是远程 HEAD" -#: builtin/clone.c:123 +#: builtin/clone.c:124 msgid "path to git-upload-pack on the remote" msgstr "远程 git-upload-pack 路径" -#: builtin/clone.c:124 builtin/fetch.c:167 builtin/grep.c:840 +#: builtin/clone.c:125 builtin/fetch.c:168 builtin/grep.c:840 #: builtin/pull.c:227 msgid "depth" msgstr "深度" -#: builtin/clone.c:125 +#: builtin/clone.c:126 msgid "create a shallow clone of that depth" msgstr "创建一个指定深度的浅克隆" -#: builtin/clone.c:126 builtin/fetch.c:169 builtin/pack-objects.c:3283 +#: builtin/clone.c:127 builtin/fetch.c:170 builtin/pack-objects.c:3283 msgid "time" msgstr "时间" -#: builtin/clone.c:127 +#: builtin/clone.c:128 msgid "create a shallow clone since a specific time" msgstr "从一个特定时间创建一个浅克隆" -#: builtin/clone.c:128 builtin/fetch.c:171 builtin/fetch.c:194 -#: builtin/rebase.c:1417 +#: builtin/clone.c:129 builtin/fetch.c:172 builtin/fetch.c:195 +#: builtin/rebase.c:1445 msgid "revision" msgstr "版本" -#: builtin/clone.c:129 builtin/fetch.c:172 +#: builtin/clone.c:130 builtin/fetch.c:173 msgid "deepen history of shallow clone, excluding rev" msgstr "深化浅克隆的历史，除了特定版本" -#: builtin/clone.c:131 +#: builtin/clone.c:132 msgid "clone only one branch, HEAD or --branch" msgstr "只克隆一个分支、HEAD 或 --branch" -#: builtin/clone.c:133 +#: builtin/clone.c:134 msgid "don't clone any tags, and make later fetches not to follow them" msgstr "不要克隆任何标签，并且后续获取操作也不下载它们" -#: builtin/clone.c:135 +#: builtin/clone.c:136 msgid "any cloned submodules will be shallow" msgstr "子模组将以浅下载模式克隆" -#: builtin/clone.c:136 builtin/init-db.c:495 +#: builtin/clone.c:137 builtin/init-db.c:495 msgid "gitdir" msgstr "git目录" -#: builtin/clone.c:137 builtin/init-db.c:496 +#: builtin/clone.c:138 builtin/init-db.c:496 msgid "separate git dir from working tree" msgstr "git目录和工作区分离" -#: builtin/clone.c:138 +#: builtin/clone.c:139 msgid "key=value" msgstr "key=value" -#: builtin/clone.c:139 +#: builtin/clone.c:140 msgid "set config inside the new repository" msgstr "在新仓库中设置配置信息" -#: builtin/clone.c:141 builtin/fetch.c:189 builtin/ls-remote.c:76 -#: builtin/push.c:572 builtin/send-pack.c:172 +#: builtin/clone.c:142 builtin/fetch.c:190 builtin/ls-remote.c:76 +#: builtin/push.c:573 builtin/send-pack.c:172 msgid "server-specific" msgstr "server-specific" -#: builtin/clone.c:141 builtin/fetch.c:189 builtin/ls-remote.c:76 -#: builtin/push.c:572 builtin/send-pack.c:173 +#: builtin/clone.c:142 builtin/fetch.c:190 builtin/ls-remote.c:76 +#: builtin/push.c:573 builtin/send-pack.c:173 msgid "option to transmit" msgstr "传输选项" -#: builtin/clone.c:142 builtin/fetch.c:190 builtin/pull.c:240 -#: builtin/push.c:573 +#: builtin/clone.c:143 builtin/fetch.c:191 builtin/pull.c:240 +#: builtin/push.c:574 msgid "use IPv4 addresses only" msgstr "只使用 IPv4 地址" -#: builtin/clone.c:144 builtin/fetch.c:192 builtin/pull.c:243 -#: builtin/push.c:575 +#: builtin/clone.c:145 builtin/fetch.c:193 builtin/pull.c:243 +#: builtin/push.c:576 msgid "use IPv6 addresses only" msgstr "只使用 IPv6 地址" -#: builtin/clone.c:148 +#: builtin/clone.c:149 msgid "any cloned submodules will use their remote-tracking branch" msgstr "任何克隆的子模组将使用它们的远程跟踪分支" -#: builtin/clone.c:284 +#: builtin/clone.c:151 +msgid "initialize sparse-checkout file to include only files at root" +msgstr "初始化稀疏检出文件，只包含根目录文件" + +#: builtin/clone.c:287 msgid "" "No directory name could be guessed.\n" "Please specify a directory on the command line" @@ -11000,42 +11525,42 @@ msgstr "" "无法猜到目录名。\n" "请在命令行指定一个目录" -#: builtin/clone.c:337 +#: builtin/clone.c:340 #, c-format msgid "info: Could not add alternate for '%s': %s\n" msgstr "info: 不能为 '%s' 添加一个备用：%s\n" -#: builtin/clone.c:410 +#: builtin/clone.c:413 #, c-format msgid "%s exists and is not a directory" msgstr "%s 存在且不是一个目录" -#: builtin/clone.c:427 +#: builtin/clone.c:430 #, c-format msgid "failed to start iterator over '%s'" msgstr "无法在 '%s' 上启动迭代器" -#: builtin/clone.c:457 +#: builtin/clone.c:460 #, c-format msgid "failed to create link '%s'" msgstr "创建链接 '%s' 失败" -#: builtin/clone.c:461 +#: builtin/clone.c:464 #, c-format msgid "failed to copy file to '%s'" msgstr "拷贝文件至 '%s' 失败" -#: builtin/clone.c:466 +#: builtin/clone.c:469 #, c-format msgid "failed to iterate over '%s'" msgstr "无法在 '%s' 上迭代" -#: builtin/clone.c:491 +#: builtin/clone.c:494 #, c-format msgid "done.\n" msgstr "完成。\n" -#: builtin/clone.c:505 +#: builtin/clone.c:508 msgid "" "Clone succeeded, but checkout failed.\n" "You can inspect what was checked out with 'git status'\n" @@ -11045,130 +11570,134 @@ msgstr "" "您可以通过 'git status' 检查哪些已被检出，然后使用命令\n" "'git restore --source=HEAD :/' 重试\n" -#: builtin/clone.c:582 +#: builtin/clone.c:585 #, c-format msgid "Could not find remote branch %s to clone." msgstr "不能发现要克隆的远程分支 %s。" -#: builtin/clone.c:701 +#: builtin/clone.c:704 #, c-format msgid "unable to update %s" msgstr "不能更新 %s" -#: builtin/clone.c:751 +#: builtin/clone.c:752 +msgid "failed to initialize sparse-checkout" +msgstr "无法初始化稀疏检出" + +#: builtin/clone.c:775 msgid "remote HEAD refers to nonexistent ref, unable to checkout.\n" msgstr "远程 HEAD 指向一个不存在的引用，无法检出。\n" -#: builtin/clone.c:782 +#: builtin/clone.c:806 msgid "unable to checkout working tree" msgstr "不能检出工作区" -#: builtin/clone.c:832 +#: builtin/clone.c:856 msgid "unable to write parameters to config file" msgstr "无法将参数写入配置文件" -#: builtin/clone.c:895 +#: builtin/clone.c:919 msgid "cannot repack to clean up" msgstr "无法执行 repack 来清理" -#: builtin/clone.c:897 +#: builtin/clone.c:921 msgid "cannot unlink temporary alternates file" msgstr "无法删除临时的 alternates 文件" -#: builtin/clone.c:937 builtin/receive-pack.c:1948 +#: builtin/clone.c:959 builtin/receive-pack.c:1948 msgid "Too many arguments." msgstr "太多参数。" -#: builtin/clone.c:941 +#: builtin/clone.c:963 msgid "You must specify a repository to clone." msgstr "您必须指定一个仓库来克隆。" -#: builtin/clone.c:954 +#: builtin/clone.c:976 #, c-format msgid "--bare and --origin %s options are incompatible." msgstr "--bare 和 --origin %s 选项不兼容。" -#: builtin/clone.c:957 +#: builtin/clone.c:979 msgid "--bare and --separate-git-dir are incompatible." msgstr "--bare 和 --separate-git-dir 选项不兼容。" -#: builtin/clone.c:970 +#: builtin/clone.c:992 #, c-format msgid "repository '%s' does not exist" msgstr "仓库 '%s' 不存在" -#: builtin/clone.c:976 builtin/fetch.c:1790 +#: builtin/clone.c:998 builtin/fetch.c:1787 #, c-format msgid "depth %s is not a positive number" msgstr "深度 %s 不是一个正数" -#: builtin/clone.c:986 +#: builtin/clone.c:1008 #, c-format msgid "destination path '%s' already exists and is not an empty directory." msgstr "目标路径 '%s' 已经存在，并且不是一个空目录。" -#: builtin/clone.c:996 +#: builtin/clone.c:1018 #, c-format msgid "working tree '%s' already exists." msgstr "工作区 '%s' 已经存在。" -#: builtin/clone.c:1011 builtin/clone.c:1032 builtin/difftool.c:271 -#: builtin/log.c:1785 builtin/worktree.c:302 builtin/worktree.c:334 +#: builtin/clone.c:1033 builtin/clone.c:1054 builtin/difftool.c:271 +#: builtin/log.c:1866 builtin/worktree.c:302 builtin/worktree.c:334 #, c-format msgid "could not create leading directories of '%s'" msgstr "不能为 '%s' 创建先导目录" -#: builtin/clone.c:1016 +#: builtin/clone.c:1038 #, c-format msgid "could not create work tree dir '%s'" msgstr "不能创建工作区目录 '%s'" -#: builtin/clone.c:1036 +#: builtin/clone.c:1058 #, c-format msgid "Cloning into bare repository '%s'...\n" msgstr "克隆到纯仓库 '%s'...\n" -#: builtin/clone.c:1038 +#: builtin/clone.c:1060 #, c-format msgid "Cloning into '%s'...\n" msgstr "正克隆到 '%s'...\n" -#: builtin/clone.c:1062 +#: builtin/clone.c:1084 msgid "" "clone --recursive is not compatible with both --reference and --reference-if-" "able" msgstr "clone --recursive 和 --reference 以及 --reference-if-able 不兼容" -#: builtin/clone.c:1123 +#: builtin/clone.c:1148 msgid "--depth is ignored in local clones; use file:// instead." msgstr "--depth 在本地克隆时被忽略，请改用 file:// 协议。" -#: builtin/clone.c:1125 +#: builtin/clone.c:1150 msgid "--shallow-since is ignored in local clones; use file:// instead." msgstr "--shallow-since 在本地克隆时被忽略，请改用 file:// 协议。" -#: builtin/clone.c:1127 +#: builtin/clone.c:1152 msgid "--shallow-exclude is ignored in local clones; use file:// instead." msgstr "--shallow-exclude 在本地克隆时被忽略，请改用 file:// 协议。" -#: builtin/clone.c:1129 +#: builtin/clone.c:1154 msgid "--filter is ignored in local clones; use file:// instead." msgstr "--filter 在本地克隆时被忽略，请改用 file:// 协议。" -#: builtin/clone.c:1132 +#: builtin/clone.c:1157 msgid "source repository is shallow, ignoring --local" msgstr "源仓库是浅克隆，忽略 --local" -#: builtin/clone.c:1137 +#: builtin/clone.c:1162 msgid "--local is ignored" msgstr "--local 被忽略" -#: builtin/clone.c:1212 builtin/clone.c:1220 +#: builtin/clone.c:1237 builtin/clone.c:1245 #, c-format msgid "Remote branch %s not found in upstream %s" msgstr "远程分支 %s 在上游 %s 未发现" -#: builtin/clone.c:1223 +#: builtin/clone.c:1248 msgid "You appear to have cloned an empty repository." msgstr "您似乎克隆了一个空仓库。" @@ -11217,7 +11746,7 @@ msgstr "" msgid "duplicate parent %s ignored" msgstr "忽略重复的父提交 %s" -#: builtin/commit-tree.c:56 builtin/commit-tree.c:136 builtin/log.c:525 +#: builtin/commit-tree.c:56 builtin/commit-tree.c:136 builtin/log.c:526 #, c-format msgid "not a valid object name %s" msgstr "不是一个有效的对象名 %s" @@ -11245,13 +11774,13 @@ msgstr "父提交" msgid "id of a parent commit object" msgstr "父提交对象 ID" -#: builtin/commit-tree.c:114 builtin/commit.c:1500 builtin/merge.c:270 +#: builtin/commit-tree.c:114 builtin/commit.c:1496 builtin/merge.c:270 #: builtin/notes.c:409 builtin/notes.c:575 builtin/stash.c:1469 #: builtin/tag.c:412 msgid "message" msgstr "说明" -#: builtin/commit-tree.c:115 builtin/commit.c:1500 +#: builtin/commit-tree.c:115 builtin/commit.c:1496 msgid "commit message" msgstr "提交说明" @@ -11259,7 +11788,7 @@ msgstr "提交说明" msgid "read commit log message from file" msgstr "从文件中读取提交说明" -#: builtin/commit-tree.c:121 builtin/commit.c:1512 builtin/merge.c:287 +#: builtin/commit-tree.c:121 builtin/commit.c:1508 builtin/merge.c:287 #: builtin/pull.c:195 builtin/revert.c:118 msgid "GPG sign commit" msgstr "GPG 提交签名" @@ -11332,94 +11861,102 @@ msgstr "" msgid "failed to unpack HEAD tree object" msgstr "解包 HEAD 树对象失败" -#: builtin/commit.c:356 +#: builtin/commit.c:351 +msgid "--pathspec-from-file with -a does not make sense" +msgstr "--pathspec-from-file 和 -a 在一起没有意义" + +#: builtin/commit.c:364 +msgid "No paths with --include/--only does not make sense." +msgstr "参数 --include/--only 不跟路径没有意义。" + +#: builtin/commit.c:376 msgid "unable to create temporary index" msgstr "不能创建临时索引" -#: builtin/commit.c:362 +#: builtin/commit.c:382 msgid "interactive add failed" msgstr "交互式添加失败" -#: builtin/commit.c:376 +#: builtin/commit.c:396 msgid "unable to update temporary index" msgstr "无法更新临时索引" -#: builtin/commit.c:378 +#: builtin/commit.c:398 msgid "Failed to update main cache tree" msgstr "不能更新树的主缓存" -#: builtin/commit.c:403 builtin/commit.c:426 builtin/commit.c:472 +#: builtin/commit.c:423 builtin/commit.c:446 builtin/commit.c:492 msgid "unable to write new_index file" msgstr "无法写 new_index 文件" -#: builtin/commit.c:455 +#: builtin/commit.c:475 msgid "cannot do a partial commit during a merge." msgstr "在合并过程中不能做部分提交。" -#: builtin/commit.c:457 +#: builtin/commit.c:477 msgid "cannot do a partial commit during a cherry-pick." msgstr "在拣选过程中不能做部分提交。" -#: builtin/commit.c:465 +#: builtin/commit.c:485 msgid "cannot read the index" msgstr "无法读取索引" -#: builtin/commit.c:484 +#: builtin/commit.c:504 msgid "unable to write temporary index file" msgstr "无法写临时索引文件" -#: builtin/commit.c:582 +#: builtin/commit.c:602 #, c-format msgid "commit '%s' lacks author header" msgstr "提交 '%s' 缺少作者信息" -#: builtin/commit.c:584 +#: builtin/commit.c:604 #, c-format msgid "commit '%s' has malformed author line" msgstr "提交 '%s' 有格式错误的作者信息" -#: builtin/commit.c:603 +#: builtin/commit.c:623 msgid "malformed --author parameter" msgstr "格式错误的 --author 参数" -#: builtin/commit.c:656 +#: builtin/commit.c:676 msgid "" "unable to select a comment character that is not used\n" "in the current commit message" msgstr "无法选择一个未被当前提交说明使用的注释字符" -#: builtin/commit.c:694 builtin/commit.c:727 builtin/commit.c:1072 +#: builtin/commit.c:714 builtin/commit.c:747 builtin/commit.c:1092 #, c-format msgid "could not lookup commit %s" msgstr "不能查询提交 %s" -#: builtin/commit.c:706 builtin/shortlog.c:319 +#: builtin/commit.c:726 builtin/shortlog.c:319 #, c-format msgid "(reading log message from standard input)\n" msgstr "（正从标准输入中读取日志信息）\n" -#: builtin/commit.c:708 +#: builtin/commit.c:728 msgid "could not read log from standard input" msgstr "不能从标准输入中读取日志信息" -#: builtin/commit.c:712 +#: builtin/commit.c:732 #, c-format msgid "could not read log file '%s'" msgstr "不能读取日志文件 '%s'" -#: builtin/commit.c:743 builtin/commit.c:759 +#: builtin/commit.c:763 builtin/commit.c:779 msgid "could not read SQUASH_MSG" msgstr "不能读取 SQUASH_MSG" -#: builtin/commit.c:750 +#: builtin/commit.c:770 msgid "could not read MERGE_MSG" msgstr "不能读取 MERGE_MSG" -#: builtin/commit.c:810 +#: builtin/commit.c:830 msgid "could not write commit template" msgstr "不能写提交模版" -#: builtin/commit.c:829 +#: builtin/commit.c:849 #, c-format msgid "" "\n" @@ -11433,7 +11970,7 @@ msgstr "" "\t%s\n" "然后重试。\n" -#: builtin/commit.c:834 +#: builtin/commit.c:854 #, c-format msgid "" "\n" @@ -11447,7 +11984,7 @@ msgstr "" "\t%s\n" "然后重试。\n" -#: builtin/commit.c:847 +#: builtin/commit.c:867 #, c-format msgid "" "Please enter the commit message for your changes. Lines starting\n" @@ -11456,7 +11993,7 @@ msgstr "" "请为您的变更输入提交说明。以 '%c' 开始的行将被忽略，而一个空的提交\n" "说明将会终止提交。\n" -#: builtin/commit.c:855 +#: builtin/commit.c:875 #, c-format msgid "" "Please enter the commit message for your changes. Lines starting\n" @@ -11467,324 +12004,320 @@ msgstr "" "也可以删除它们。一个空的提交说明将会终止提交。\n" # 译者：为保证在输出中对齐，注意调整句中空格！ -#: builtin/commit.c:872 +#: builtin/commit.c:892 #, c-format msgid "%sAuthor: %.*s <%.*s>" msgstr "%s作者： %.*s <%.*s>" # 译者：为保证在输出中对齐，注意调整句中空格！ -#: builtin/commit.c:880 +#: builtin/commit.c:900 #, c-format msgid "%sDate: %s" msgstr "%s日期： %s" # 译者：为保证在输出中对齐，注意调整句中空格！ -#: builtin/commit.c:887 +#: builtin/commit.c:907 #, c-format msgid "%sCommitter: %.*s <%.*s>" msgstr "%s提交者：%.*s <%.*s>" -#: builtin/commit.c:905 +#: builtin/commit.c:925 msgid "Cannot read index" msgstr "无法读取索引" -#: builtin/commit.c:972 +#: builtin/commit.c:992 msgid "Error building trees" msgstr "无法创建树对象" -#: builtin/commit.c:986 builtin/tag.c:275 +#: builtin/commit.c:1006 builtin/tag.c:275 #, c-format msgid "Please supply the message using either -m or -F option.\n" msgstr "请使用 -m 或 -F 选项提供提交说明。\n" -#: builtin/commit.c:1030 +#: builtin/commit.c:1050 #, c-format msgid "--author '%s' is not 'Name ' and matches no existing author" msgstr "--author '%s' 不是 '姓名 <邮箱>' 格式，且未能在现有作者中找到匹配" -#: builtin/commit.c:1044 +#: builtin/commit.c:1064 #, c-format msgid "Invalid ignored mode '%s'" msgstr "无效的忽略模式 '%s'" -#: builtin/commit.c:1062 builtin/commit.c:1304 +#: builtin/commit.c:1082 builtin/commit.c:1322 #, c-format msgid "Invalid untracked files mode '%s'" msgstr "无效的未追踪文件参数 '%s'" -#: builtin/commit.c:1102 +#: builtin/commit.c:1122 msgid "--long and -z are incompatible" msgstr "--long 和 -z 选项不兼容" -#: builtin/commit.c:1146 +#: builtin/commit.c:1166 msgid "Using both --reset-author and --author does not make sense" msgstr "同时使用 --reset-author 和 --author 没有意义" -#: builtin/commit.c:1155 +#: builtin/commit.c:1175 msgid "You have nothing to amend." msgstr "您没有可修补的提交。" -#: builtin/commit.c:1158 +#: builtin/commit.c:1178 msgid "You are in the middle of a merge -- cannot amend." msgstr "您正处于一个合并过程中 -- 无法修补提交。" -#: builtin/commit.c:1160 +#: builtin/commit.c:1180 msgid "You are in the middle of a cherry-pick -- cannot amend." msgstr "您正处于一个拣选过程中 -- 无法修补提交。" -#: builtin/commit.c:1163 +#: builtin/commit.c:1183 msgid "Options --squash and --fixup cannot be used together" msgstr "选项 --squash 和 --fixup 不能同时使用" -#: builtin/commit.c:1173 +#: builtin/commit.c:1193 msgid "Only one of -c/-C/-F/--fixup can be used." msgstr "只能用一个 -c/-C/-F/--fixup 选项。" -#: builtin/commit.c:1175 +#: builtin/commit.c:1195 msgid "Option -m cannot be combined with -c/-C/-F." msgstr "选项 -m 不能和 -c/-C/-F 同时使用。" -#: builtin/commit.c:1183 +#: builtin/commit.c:1203 msgid "--reset-author can be used only with -C, -c or --amend." msgstr "--reset-author 只能和 -C、-c 或 --amend 同时使用。" -#: builtin/commit.c:1200 +#: builtin/commit.c:1220 msgid "Only one of --include/--only/--all/--interactive/--patch can be used." msgstr "只能用一个 --include/--only/--all/--interactive/--patch 选项。" -#: builtin/commit.c:1202 -msgid "No paths with --include/--only does not make sense." -msgstr "参数 --include/--only 不跟路径没有意义。" - -#: builtin/commit.c:1208 +#: builtin/commit.c:1226 #, c-format msgid "paths '%s ...' with -a does not make sense" msgstr "路径 '%s ...' 和 -a 选项同时使用没有意义" -#: builtin/commit.c:1339 builtin/commit.c:1523 +#: builtin/commit.c:1357 builtin/commit.c:1519 msgid "show status concisely" msgstr "以简洁的格式显示状态" -#: builtin/commit.c:1341 builtin/commit.c:1525 +#: builtin/commit.c:1359 builtin/commit.c:1521 msgid "show branch information" msgstr "显示分支信息" -#: builtin/commit.c:1343 +#: builtin/commit.c:1361 msgid "show stash information" msgstr "显示贮藏区信息" -#: builtin/commit.c:1345 builtin/commit.c:1527 +#: builtin/commit.c:1363 builtin/commit.c:1523 msgid "compute full ahead/behind values" msgstr "计算完整的领先/落后值" -#: builtin/commit.c:1347 +#: builtin/commit.c:1365 msgid "version" msgstr "版本" -#: builtin/commit.c:1347 builtin/commit.c:1529 builtin/push.c:548 +#: builtin/commit.c:1365 builtin/commit.c:1525 builtin/push.c:549 #: builtin/worktree.c:650 msgid "machine-readable output" msgstr "机器可读的输出" -#: builtin/commit.c:1350 builtin/commit.c:1531 +#: builtin/commit.c:1368 builtin/commit.c:1527 msgid "show status in long format (default)" msgstr "以长格式显示状态（默认）" -#: builtin/commit.c:1353 builtin/commit.c:1534 +#: builtin/commit.c:1371 builtin/commit.c:1530 msgid "terminate entries with NUL" msgstr "条目以 NUL 字符结尾" -#: builtin/commit.c:1355 builtin/commit.c:1359 builtin/commit.c:1537 +#: builtin/commit.c:1373 builtin/commit.c:1377 builtin/commit.c:1533 #: builtin/fast-export.c:1153 builtin/fast-export.c:1156 -#: builtin/fast-export.c:1159 builtin/rebase.c:1495 parse-options.h:332 +#: builtin/fast-export.c:1159 builtin/rebase.c:1525 parse-options.h:336 msgid "mode" msgstr "模式" -#: builtin/commit.c:1356 builtin/commit.c:1537 +#: builtin/commit.c:1374 builtin/commit.c:1533 msgid "show untracked files, optional modes: all, normal, no. (Default: all)" msgstr "显示未跟踪的文件，“模式”的可选参数：all、normal、no。（默认：all）" -#: builtin/commit.c:1360 +#: builtin/commit.c:1378 msgid "" "show ignored files, optional modes: traditional, matching, no. (Default: " "traditional)" msgstr "" "显示已忽略的文件，可选模式：traditional、matching、no。（默认：traditional）" -#: builtin/commit.c:1362 parse-options.h:188 +#: builtin/commit.c:1380 parse-options.h:192 msgid "when" msgstr "何时" -#: builtin/commit.c:1363 +#: builtin/commit.c:1381 msgid "" "ignore changes to submodules, optional when: all, dirty, untracked. " "(Default: all)" msgstr "" "忽略子模组的更改，“何时”的可选参数：all、dirty、untracked。（默认：all）" -#: builtin/commit.c:1365 +#: builtin/commit.c:1383 msgid "list untracked files in columns" msgstr "以列的方式显示未跟踪的文件" -#: builtin/commit.c:1366 +#: builtin/commit.c:1384 msgid "do not detect renames" msgstr "不检测重命名" -#: builtin/commit.c:1368 +#: builtin/commit.c:1386 msgid "detect renames, optionally set similarity index" msgstr "检测重命名，可以设置索引相似度" -#: builtin/commit.c:1388 +#: builtin/commit.c:1406 msgid "Unsupported combination of ignored and untracked-files arguments" msgstr "不支持已忽略和未跟踪文件参数的组合" -#: builtin/commit.c:1493 +#: builtin/commit.c:1489 msgid "suppress summary after successful commit" msgstr "提交成功后不显示概述信息" -#: builtin/commit.c:1494 +#: builtin/commit.c:1490 msgid "show diff in commit message template" msgstr "在提交说明模板里显示差异" -#: builtin/commit.c:1496 +#: builtin/commit.c:1492 msgid "Commit message options" msgstr "提交说明选项" -#: builtin/commit.c:1497 builtin/merge.c:274 builtin/tag.c:414 +#: builtin/commit.c:1493 builtin/merge.c:274 builtin/tag.c:414 msgid "read message from file" msgstr "从文件中读取提交说明" -#: builtin/commit.c:1498 +#: builtin/commit.c:1494 msgid "author" msgstr "作者" -#: builtin/commit.c:1498 +#: builtin/commit.c:1494 msgid "override author for commit" msgstr "提交时覆盖作者" -#: builtin/commit.c:1499 builtin/gc.c:538 +#: builtin/commit.c:1495 builtin/gc.c:538 msgid "date" msgstr "日期" -#: builtin/commit.c:1499 +#: builtin/commit.c:1495 msgid "override date for commit" msgstr "提交时覆盖日期" -#: builtin/commit.c:1501 builtin/commit.c:1502 builtin/commit.c:1503 -#: builtin/commit.c:1504 parse-options.h:324 ref-filter.h:92 +#: builtin/commit.c:1497 builtin/commit.c:1498 builtin/commit.c:1499 +#: builtin/commit.c:1500 parse-options.h:328 ref-filter.h:92 msgid "commit" msgstr "提交" -#: builtin/commit.c:1501 +#: builtin/commit.c:1497 msgid "reuse and edit message from specified commit" msgstr "重用并编辑指定提交的提交说明" -#: builtin/commit.c:1502 +#: builtin/commit.c:1498 msgid "reuse message from specified commit" msgstr "重用指定提交的提交说明" -#: builtin/commit.c:1503 +#: builtin/commit.c:1499 msgid "use autosquash formatted message to fixup specified commit" msgstr "使用 autosquash 格式的提交说明用以修正指定的提交" -#: builtin/commit.c:1504 +#: builtin/commit.c:1500 msgid "use autosquash formatted message to squash specified commit" msgstr "使用 autosquash 格式的提交说明用以压缩至指定的提交" -#: builtin/commit.c:1505 +#: builtin/commit.c:1501 msgid "the commit is authored by me now (used with -C/-c/--amend)" msgstr "现在将该提交的作者改为我（和 -C/-c/--amend 参数共用）" -#: builtin/commit.c:1506 builtin/log.c:1565 builtin/merge.c:289 +#: builtin/commit.c:1502 builtin/log.c:1634 builtin/merge.c:289 #: builtin/pull.c:164 builtin/revert.c:110 msgid "add Signed-off-by:" msgstr "添加 Signed-off-by: 签名" -#: builtin/commit.c:1507 +#: builtin/commit.c:1503 msgid "use specified template file" msgstr "使用指定的模板文件" -#: builtin/commit.c:1508 +#: builtin/commit.c:1504 msgid "force edit of commit" msgstr "强制编辑提交" -#: builtin/commit.c:1510 +#: builtin/commit.c:1506 msgid "include status in commit message template" msgstr "在提交说明模板里包含状态信息" -#: builtin/commit.c:1515 +#: builtin/commit.c:1511 msgid "Commit contents options" msgstr "提交内容选项" -#: builtin/commit.c:1516 +#: builtin/commit.c:1512 msgid "commit all changed files" msgstr "提交所有改动的文件" -#: builtin/commit.c:1517 +#: builtin/commit.c:1513 msgid "add specified files to index for commit" msgstr "添加指定的文件到索引区等待提交" -#: builtin/commit.c:1518 +#: builtin/commit.c:1514 msgid "interactively add files" msgstr "交互式添加文件" -#: builtin/commit.c:1519 +#: builtin/commit.c:1515 msgid "interactively add changes" msgstr "交互式添加变更" -#: builtin/commit.c:1520 +#: builtin/commit.c:1516 msgid "commit only specified files" msgstr "只提交指定的文件" -#: builtin/commit.c:1521 +#: builtin/commit.c:1517 msgid "bypass pre-commit and commit-msg hooks" msgstr "绕过 pre-commit 和 commit-msg 钩子" -#: builtin/commit.c:1522 +#: builtin/commit.c:1518 msgid "show what would be committed" msgstr "显示将要提交的内容" -#: builtin/commit.c:1535 +#: builtin/commit.c:1531 msgid "amend previous commit" msgstr "修改先前的提交" -#: builtin/commit.c:1536 +#: builtin/commit.c:1532 msgid "bypass post-rewrite hook" msgstr "绕过 post-rewrite 钩子" -#: builtin/commit.c:1541 +#: builtin/commit.c:1539 msgid "ok to record an empty change" msgstr "允许一个空提交" -#: builtin/commit.c:1543 +#: builtin/commit.c:1541 msgid "ok to record a change with an empty message" msgstr "允许空的提交说明" -#: builtin/commit.c:1616 +#: builtin/commit.c:1614 #, c-format msgid "Corrupt MERGE_HEAD file (%s)" msgstr "损坏的 MERGE_HEAD 文件（%s）" -#: builtin/commit.c:1623 +#: builtin/commit.c:1621 msgid "could not read MERGE_MODE" msgstr "不能读取 MERGE_MODE" -#: builtin/commit.c:1642 +#: builtin/commit.c:1640 #, c-format msgid "could not read commit message: %s" msgstr "不能读取提交说明：%s" -#: builtin/commit.c:1649 +#: builtin/commit.c:1647 #, c-format msgid "Aborting commit due to empty commit message.\n" msgstr "终止提交因为提交说明为空。\n" -#: builtin/commit.c:1654 +#: builtin/commit.c:1652 #, c-format msgid "Aborting commit; you did not edit the message.\n" msgstr "终止提交；您未更改来自模版的提交说明。\n" -#: builtin/commit.c:1688 +#: builtin/commit.c:1686 msgid "" "repository has been updated, but unable to write\n" "new_index file. Check that disk is not full and quota is\n" @@ -11793,22 +12326,14 @@ msgstr "" "仓库已更新，但无法写 new_index 文件。检查是否磁盘已满或\n" "磁盘配额已耗尽，然后执行 \"git restore --staged :/\" 恢复。" -#: builtin/commit-graph.c:11 -msgid "git commit-graph [--object-dir ]" -msgstr "git commit-graph [--object-dir <对象目录>]" - -#: builtin/commit-graph.c:12 builtin/commit-graph.c:24 -msgid "git commit-graph read [--object-dir ]" -msgstr "git commit-graph read [--object-dir <对象目录>]" - -#: builtin/commit-graph.c:13 builtin/commit-graph.c:19 +#: builtin/commit-graph.c:11 builtin/commit-graph.c:17 msgid "" "git commit-graph verify [--object-dir ] [--shallow] [--[no-]progress]" msgstr "" "git commit-graph verify [--object-dir <对象目录>] [--shallow] [--" "[no-]progress]" -#: builtin/commit-graph.c:14 builtin/commit-graph.c:29 +#: builtin/commit-graph.c:12 builtin/commit-graph.c:22 msgid "" "git commit-graph write [--object-dir ] [--append|--split] [--" "reachable|--stdin-packs|--stdin-commits] [--[no-]progress] " @@ -11816,55 +12341,54 @@ msgstr "" "git commit-graph write [--object-dir <对象目录>] [--append|--split] [--" "reachable|--stdin-packs|--stdin-commits] [--[no-]progress] " -#: builtin/commit-graph.c:55 builtin/commit-graph.c:107 -#: builtin/commit-graph.c:170 builtin/commit-graph.c:254 builtin/fetch.c:178 -#: builtin/log.c:1585 +#: builtin/commit-graph.c:48 builtin/commit-graph.c:103 +#: builtin/commit-graph.c:187 builtin/fetch.c:179 builtin/log.c:1657 msgid "dir" msgstr "目录" -#: builtin/commit-graph.c:56 builtin/commit-graph.c:108 -#: builtin/commit-graph.c:171 builtin/commit-graph.c:255 +#: builtin/commit-graph.c:49 builtin/commit-graph.c:104 +#: builtin/commit-graph.c:188 msgid "The object directory to store the graph" msgstr "保存图形的对象目录" -#: builtin/commit-graph.c:58 +#: builtin/commit-graph.c:51 msgid "if the commit-graph is split, only verify the tip file" msgstr "如果提交图形被拆分，只验证头一个文件" -#: builtin/commit-graph.c:80 builtin/commit-graph.c:125 +#: builtin/commit-graph.c:73 t/helper/test-read-graph.c:23 #, c-format msgid "Could not open commit-graph '%s'" msgstr "无法打开提交图形 '%s'" -#: builtin/commit-graph.c:173 +#: builtin/commit-graph.c:106 msgid "start walk at all refs" msgstr "开始遍历所有引用" -#: builtin/commit-graph.c:175 +#: builtin/commit-graph.c:108 msgid "scan pack-indexes listed by stdin for commits" msgstr "从标准输入中的包索引文件列表中扫描提交" -#: builtin/commit-graph.c:177 +#: builtin/commit-graph.c:110 msgid "start walk at commits listed by stdin" msgstr "从标准输入中的提交开始扫描" -#: builtin/commit-graph.c:179 +#: builtin/commit-graph.c:112 msgid "include all commits already in the commit-graph file" msgstr "包含 commit-graph 文件中已有所有提交" -#: builtin/commit-graph.c:182 +#: builtin/commit-graph.c:115 msgid "allow writing an incremental commit-graph file" msgstr "允许写一个增量提交图形文件" -#: builtin/commit-graph.c:184 builtin/commit-graph.c:188 +#: builtin/commit-graph.c:117 builtin/commit-graph.c:121 msgid "maximum number of commits in a non-base split commit-graph" msgstr "在非基本拆分提交图形中的最大提交数" -#: builtin/commit-graph.c:186 +#: builtin/commit-graph.c:119 msgid "maximum ratio between two levels of a split commit-graph" msgstr "一个拆分提交图形的两个级别之间的最大比率" -#: builtin/commit-graph.c:204 +#: builtin/commit-graph.c:137 msgid "use at most one of --reachable, --stdin-commits, or --stdin-packs" msgstr "不能同时使用 --reachable、--stdin-commits 或 --stdin-packs" @@ -12313,7 +12837,7 @@ msgstr "只考虑匹配 <模式> 的标签" msgid "do not consider tags matching " msgstr "不考虑匹配 <模式> 的标签" -#: builtin/describe.c:553 builtin/name-rev.c:426 +#: builtin/describe.c:553 builtin/name-rev.c:473 msgid "show abbreviated commit object as fallback" msgstr "显示简写的提交号作为后备" @@ -12566,7 +13090,7 @@ msgstr "使用 done 功能来终止流" msgid "Skip output of blob data" msgstr "跳过数据对象的输出" -#: builtin/fast-export.c:1177 builtin/log.c:1633 +#: builtin/fast-export.c:1177 builtin/log.c:1705 msgid "refspec" msgstr "引用规格" @@ -12610,177 +13134,181 @@ msgstr "git fetch --multiple [<选项>] [(<仓库> | <组>)...]" msgid "git fetch --all []" msgstr "git fetch --all [<选项>]" -#: builtin/fetch.c:115 +#: builtin/fetch.c:116 msgid "fetch.parallel cannot be negative" msgstr "fetch.parallel 不能为负数" -#: builtin/fetch.c:138 builtin/pull.c:204 +#: builtin/fetch.c:139 builtin/pull.c:204 msgid "fetch from all remotes" msgstr "从所有的远程抓取" -#: builtin/fetch.c:140 builtin/pull.c:248 +#: builtin/fetch.c:141 builtin/pull.c:248 msgid "set upstream for git pull/fetch" msgstr "为 git pull/fetch 设置上游" -#: builtin/fetch.c:142 builtin/pull.c:207 +#: builtin/fetch.c:143 builtin/pull.c:207 msgid "append to .git/FETCH_HEAD instead of overwriting" msgstr "追加到 .git/FETCH_HEAD 而不是覆盖它" -#: builtin/fetch.c:144 builtin/pull.c:210 +#: builtin/fetch.c:145 builtin/pull.c:210 msgid "path to upload pack on remote end" msgstr "上传包到远程的路径" -#: builtin/fetch.c:145 +#: builtin/fetch.c:146 msgid "force overwrite of local reference" msgstr "强制覆盖本地引用" -#: builtin/fetch.c:147 +#: builtin/fetch.c:148 msgid "fetch from multiple remotes" msgstr "从多个远程抓取" -#: builtin/fetch.c:149 builtin/pull.c:214 +#: builtin/fetch.c:150 builtin/pull.c:214 msgid "fetch all tags and associated objects" msgstr "抓取所有的标签和关联对象" -#: builtin/fetch.c:151 +#: builtin/fetch.c:152 msgid "do not fetch all tags (--no-tags)" msgstr "不抓取任何标签(--no-tags)" -#: builtin/fetch.c:153 +#: builtin/fetch.c:154 msgid "number of submodules fetched in parallel" msgstr "子模组获取的并发数" -#: builtin/fetch.c:155 builtin/pull.c:217 +#: builtin/fetch.c:156 builtin/pull.c:217 msgid "prune remote-tracking branches no longer on remote" msgstr "清除远程已经不存在的分支的跟踪分支" -#: builtin/fetch.c:157 +#: builtin/fetch.c:158 msgid "prune local tags no longer on remote and clobber changed tags" msgstr "清除远程不存在的本地标签，并且替换变更标签" # 译者：可选值，不能翻译 -#: builtin/fetch.c:158 builtin/fetch.c:181 builtin/pull.c:141 +#: builtin/fetch.c:159 builtin/fetch.c:182 builtin/pull.c:141 msgid "on-demand" msgstr "on-demand" -#: builtin/fetch.c:159 +#: builtin/fetch.c:160 msgid "control recursive fetching of submodules" msgstr "控制子模组的递归抓取" -#: builtin/fetch.c:163 builtin/pull.c:225 +#: builtin/fetch.c:164 builtin/pull.c:225 msgid "keep downloaded pack" msgstr "保持下载包" -#: builtin/fetch.c:165 +#: builtin/fetch.c:166 msgid "allow updating of HEAD ref" msgstr "允许更新 HEAD 引用" -#: builtin/fetch.c:168 builtin/fetch.c:174 builtin/pull.c:228 +#: builtin/fetch.c:169 builtin/fetch.c:175 builtin/pull.c:228 msgid "deepen history of shallow clone" msgstr "深化浅克隆的历史" -#: builtin/fetch.c:170 +#: builtin/fetch.c:171 msgid "deepen history of shallow repository based on time" msgstr "基于时间来深化浅克隆的历史" -#: builtin/fetch.c:176 builtin/pull.c:231 +#: builtin/fetch.c:177 builtin/pull.c:231 msgid "convert to a complete repository" msgstr "转换为一个完整的仓库" -#: builtin/fetch.c:179 +#: builtin/fetch.c:180 msgid "prepend this to submodule path output" msgstr "在子模组路径输出的前面加上此目录" -#: builtin/fetch.c:182 +#: builtin/fetch.c:183 msgid "" "default for recursive fetching of submodules (lower priority than config " "files)" msgstr "递归获取子模组的缺省值（比配置文件优先级低）" -#: builtin/fetch.c:186 builtin/pull.c:234 +#: builtin/fetch.c:187 builtin/pull.c:234 msgid "accept refs that update .git/shallow" msgstr "接受更新 .git/shallow 的引用" -#: builtin/fetch.c:187 builtin/pull.c:236 +#: builtin/fetch.c:188 builtin/pull.c:236 msgid "refmap" msgstr "引用映射" -#: builtin/fetch.c:188 builtin/pull.c:237 +#: builtin/fetch.c:189 builtin/pull.c:237 msgid "specify fetch refmap" msgstr "指定获取操作的引用映射" -#: builtin/fetch.c:195 +#: builtin/fetch.c:196 msgid "report that we have only objects reachable from this object" msgstr "报告我们只拥有从该对象开始可达的对象" -#: builtin/fetch.c:198 +#: builtin/fetch.c:199 msgid "run 'gc --auto' after fetching" msgstr "获取后执行 'gc --auto'" -#: builtin/fetch.c:200 builtin/pull.c:246 +#: builtin/fetch.c:201 builtin/pull.c:246 msgid "check for forced-updates on all updated branches" msgstr "在所有更新分支上检查强制更新" -#: builtin/fetch.c:510 +#: builtin/fetch.c:203 +msgid "write the commit-graph after fetching" +msgstr "抓取后写提交图" + +#: builtin/fetch.c:513 msgid "Couldn't find remote ref HEAD" msgstr "无法发现远程 HEAD 引用" -#: builtin/fetch.c:650 +#: builtin/fetch.c:653 #, c-format msgid "configuration fetch.output contains invalid value %s" msgstr "配置变量 fetch.output 包含无效值 %s" -#: builtin/fetch.c:748 +#: builtin/fetch.c:751 #, c-format msgid "object %s not found" msgstr "对象 %s 未发现" -#: builtin/fetch.c:752 +#: builtin/fetch.c:755 msgid "[up to date]" msgstr "[最新]" -#: builtin/fetch.c:765 builtin/fetch.c:781 builtin/fetch.c:853 +#: builtin/fetch.c:768 builtin/fetch.c:784 builtin/fetch.c:856 msgid "[rejected]" msgstr "[已拒绝]" -#: builtin/fetch.c:766 +#: builtin/fetch.c:769 msgid "can't fetch in current branch" msgstr "当前分支下不能执行获取操作" -#: builtin/fetch.c:776 +#: builtin/fetch.c:779 msgid "[tag update]" msgstr "[标签更新]" -#: builtin/fetch.c:777 builtin/fetch.c:814 builtin/fetch.c:836 -#: builtin/fetch.c:848 +#: builtin/fetch.c:780 builtin/fetch.c:817 builtin/fetch.c:839 +#: builtin/fetch.c:851 msgid "unable to update local ref" msgstr "不能更新本地引用" -#: builtin/fetch.c:781 +#: builtin/fetch.c:784 msgid "would clobber existing tag" msgstr "会破坏现有的标签" -#: builtin/fetch.c:803 +#: builtin/fetch.c:806 msgid "[new tag]" msgstr "[新标签]" -#: builtin/fetch.c:806 +#: builtin/fetch.c:809 msgid "[new branch]" msgstr "[新分支]" -#: builtin/fetch.c:809 +#: builtin/fetch.c:812 msgid "[new ref]" msgstr "[新引用]" -#: builtin/fetch.c:848 +#: builtin/fetch.c:851 msgid "forced update" msgstr "强制更新" -#: builtin/fetch.c:853 +#: builtin/fetch.c:856 msgid "non-fast-forward" msgstr "非快进" -#: builtin/fetch.c:874 +#: builtin/fetch.c:877 msgid "" "Fetch normally indicates which branches had a forced update,\n" "but that check has been disabled. To re-enable, use '--show-forced-updates'\n" @@ -12790,7 +13318,7 @@ msgstr "" "要重新启用，请使用 '--show-forced-updates' 选项或运行\n" "'git config fetch.showForcedUpdates true'。" -#: builtin/fetch.c:878 +#: builtin/fetch.c:881 #, c-format msgid "" "It took %.2f seconds to check forced updates. You can use\n" @@ -12801,22 +13329,22 @@ msgstr "" "花了 %.2f 秒来检查强制更新。您可以使用 '--no-show-forced-updates'\n" "或运行 'git config fetch.showForcedUpdates false' 以避免此项检查。\n" -#: builtin/fetch.c:908 +#: builtin/fetch.c:911 #, c-format msgid "%s did not send all necessary objects\n" msgstr "%s 未发送所有必需的对象\n" -#: builtin/fetch.c:929 +#: builtin/fetch.c:932 #, c-format msgid "reject %s because shallow roots are not allowed to be updated" msgstr "拒绝 %s 因为浅克隆不允许被更新" -#: builtin/fetch.c:1020 builtin/fetch.c:1157 +#: builtin/fetch.c:1017 builtin/fetch.c:1155 #, c-format msgid "From %.*s\n" msgstr "来自 %.*s\n" -#: builtin/fetch.c:1031 +#: builtin/fetch.c:1028 #, c-format msgid "" "some local refs could not be updated; try running\n" @@ -12826,57 +13354,57 @@ msgstr "" " 'git remote prune %s' 来删除旧的、有冲突的分支" # 译者：注意保持前导空格 -#: builtin/fetch.c:1127 +#: builtin/fetch.c:1125 #, c-format msgid " (%s will become dangling)" msgstr " （%s 将成为悬空状态）" # 译者：注意保持前导空格 -#: builtin/fetch.c:1128 +#: builtin/fetch.c:1126 #, c-format msgid " (%s has become dangling)" msgstr " （%s 已成为悬空状态）" -#: builtin/fetch.c:1160 +#: builtin/fetch.c:1158 msgid "[deleted]" msgstr "[已删除]" -#: builtin/fetch.c:1161 builtin/remote.c:1036 +#: builtin/fetch.c:1159 builtin/remote.c:1035 msgid "(none)" msgstr "（无）" -#: builtin/fetch.c:1184 +#: builtin/fetch.c:1182 #, c-format msgid "Refusing to fetch into current branch %s of non-bare repository" msgstr "拒绝获取到非纯仓库的当前分支 %s" -#: builtin/fetch.c:1203 +#: builtin/fetch.c:1201 #, c-format msgid "Option \"%s\" value \"%s\" is not valid for %s" msgstr "选项 \"%s\" 的值 \"%s\" 对于 %s 是无效的" -#: builtin/fetch.c:1206 +#: builtin/fetch.c:1204 #, c-format msgid "Option \"%s\" is ignored for %s\n" msgstr "选项 \"%s\" 为 %s 所忽略\n" -#: builtin/fetch.c:1414 -msgid "multiple branch detected, incompatible with --set-upstream" +#: builtin/fetch.c:1412 +msgid "multiple branches detected, incompatible with --set-upstream" msgstr "检测到多分支，和 --set-upstream 不兼容" -#: builtin/fetch.c:1429 +#: builtin/fetch.c:1427 msgid "not setting upstream for a remote remote-tracking branch" msgstr "没有为一个远程跟踪分支设置上游" -#: builtin/fetch.c:1431 +#: builtin/fetch.c:1429 msgid "not setting upstream for a remote tag" msgstr "没有为一个远程标签设置上游" -#: builtin/fetch.c:1433 +#: builtin/fetch.c:1431 msgid "unknown branch type" msgstr "未知的分支类型" -#: builtin/fetch.c:1435 +#: builtin/fetch.c:1433 msgid "" "no source branch found.\n" "you need to specify exactly one branch with the --set-upstream option." @@ -12884,65 +13412,65 @@ msgstr "" "未发现源分支。\n" "您需要使用 --set-upstream 选项指定一个分支。" -#: builtin/fetch.c:1561 builtin/fetch.c:1623 +#: builtin/fetch.c:1559 builtin/fetch.c:1622 #, c-format msgid "Fetching %s\n" msgstr "正在获取 %s\n" -#: builtin/fetch.c:1571 builtin/fetch.c:1625 builtin/remote.c:100 +#: builtin/fetch.c:1569 builtin/fetch.c:1624 builtin/remote.c:100 #, c-format msgid "Could not fetch %s" msgstr "不能获取 %s" -#: builtin/fetch.c:1583 +#: builtin/fetch.c:1581 #, c-format msgid "could not fetch '%s' (exit code: %d)\n" msgstr "无法获取 '%s'（退出码：%d）\n" -#: builtin/fetch.c:1685 +#: builtin/fetch.c:1684 msgid "" "No remote repository specified. Please, specify either a URL or a\n" "remote name from which new revisions should be fetched." msgstr "未指定远程仓库。请通过一个 URL 或远程仓库名指定，用以获取新提交。" -#: builtin/fetch.c:1722 +#: builtin/fetch.c:1721 msgid "You need to specify a tag name." msgstr "您需要指定一个标签名称。" -#: builtin/fetch.c:1774 +#: builtin/fetch.c:1771 msgid "Negative depth in --deepen is not supported" msgstr "--deepen 不支持负数深度" -#: builtin/fetch.c:1776 +#: builtin/fetch.c:1773 msgid "--deepen and --depth are mutually exclusive" msgstr "--deepen 和 --depth 是互斥的" -#: builtin/fetch.c:1781 +#: builtin/fetch.c:1778 msgid "--depth and --unshallow cannot be used together" msgstr "--depth 和 --unshallow 不能同时使用" -#: builtin/fetch.c:1783 +#: builtin/fetch.c:1780 msgid "--unshallow on a complete repository does not make sense" msgstr "对于一个完整的仓库，参数 --unshallow 没有意义" -#: builtin/fetch.c:1799 +#: builtin/fetch.c:1796 msgid "fetch --all does not take a repository argument" msgstr "fetch --all 不能带一个仓库参数" -#: builtin/fetch.c:1801 +#: builtin/fetch.c:1798 msgid "fetch --all does not make sense with refspecs" msgstr "fetch --all 带引用规格没有任何意义" -#: builtin/fetch.c:1810 +#: builtin/fetch.c:1807 #, c-format msgid "No such remote or remote group: %s" msgstr "没有这样的远程或远程组：%s" -#: builtin/fetch.c:1817 +#: builtin/fetch.c:1814 msgid "Fetching a group and specifying refspecs does not make sense" msgstr "获取组并指定引用规格没有意义" -#: builtin/fetch.c:1835 +#: builtin/fetch.c:1832 msgid "" "--filter can only be used with the remote configured in extensions." "partialclone" @@ -12953,23 +13481,23 @@ msgid "" "git fmt-merge-msg [-m ] [--log[=] | --no-log] [--file ]" msgstr "git fmt-merge-msg [-m <说明>] [--log[=] | --no-log] [--file <文件>]" -#: builtin/fmt-merge-msg.c:672 +#: builtin/fmt-merge-msg.c:674 msgid "populate log with at most entries from shortlog" msgstr "向提交说明中最多复制指定条目（合并而来的提交）的简短说明" -#: builtin/fmt-merge-msg.c:675 +#: builtin/fmt-merge-msg.c:677 msgid "alias for --log (deprecated)" msgstr "参数 --log 的别名（已弃用）" -#: builtin/fmt-merge-msg.c:678 +#: builtin/fmt-merge-msg.c:680 msgid "text" msgstr "文本" -#: builtin/fmt-merge-msg.c:679 +#: builtin/fmt-merge-msg.c:681 msgid "use as start of message" msgstr "使用 <文本> 作为提交说明的开始" -#: builtin/fmt-merge-msg.c:680 +#: builtin/fmt-merge-msg.c:682 msgid "file to read from" msgstr "从文件中读取" @@ -13033,32 +13561,32 @@ msgstr "只打印包含该提交的引用" msgid "print only refs which don't contain the commit" msgstr "只打印不包含该提交的引用" -#: builtin/fsck.c:88 builtin/fsck.c:160 builtin/fsck.c:161 +#: builtin/fsck.c:68 builtin/fsck.c:147 builtin/fsck.c:148 msgid "unknown" msgstr "未知" #. TRANSLATORS: e.g. error in tree 01bfda: -#: builtin/fsck.c:120 builtin/fsck.c:136 +#: builtin/fsck.c:100 builtin/fsck.c:120 #, c-format msgid "error in %s %s: %s" msgstr "%s %s 错误：%s" #. TRANSLATORS: e.g. warning in tree 01bfda: -#: builtin/fsck.c:131 +#: builtin/fsck.c:114 #, c-format msgid "warning in %s %s: %s" msgstr "%s %s 警告：%s" -#: builtin/fsck.c:157 builtin/fsck.c:159 +#: builtin/fsck.c:143 builtin/fsck.c:146 #, c-format msgid "broken link from %7s %s" msgstr "来自 %7s %s 的损坏的链接" -#: builtin/fsck.c:168 +#: builtin/fsck.c:155 msgid "wrong object type in link" msgstr "链接中错误的对象类型" -#: builtin/fsck.c:184 +#: builtin/fsck.c:171 #, c-format msgid "" "broken link from %7s %s\n" @@ -13067,211 +13595,211 @@ msgstr "" "损坏的链接来自于 %7s %s\n" " 到 %7s %s" -#: builtin/fsck.c:295 +#: builtin/fsck.c:282 #, c-format msgid "missing %s %s" msgstr "缺失 %s %s" -#: builtin/fsck.c:321 +#: builtin/fsck.c:309 #, c-format msgid "unreachable %s %s" msgstr "不可达 %s %s" -#: builtin/fsck.c:340 +#: builtin/fsck.c:329 #, c-format msgid "dangling %s %s" msgstr "悬空 %s %s" -#: builtin/fsck.c:349 +#: builtin/fsck.c:339 msgid "could not create lost-found" msgstr "不能创建 lost-found" -#: builtin/fsck.c:360 +#: builtin/fsck.c:350 #, c-format msgid "could not finish '%s'" msgstr "不能完成 '%s'" -#: builtin/fsck.c:377 +#: builtin/fsck.c:367 #, c-format msgid "Checking %s" msgstr "正在检查 %s" -#: builtin/fsck.c:415 +#: builtin/fsck.c:405 #, c-format msgid "Checking connectivity (%d objects)" msgstr "正在检查连通性（%d 个对象）" -#: builtin/fsck.c:434 +#: builtin/fsck.c:424 #, c-format msgid "Checking %s %s" msgstr "正在检查 %s %s" -#: builtin/fsck.c:438 +#: builtin/fsck.c:429 msgid "broken links" msgstr "损坏的链接" -#: builtin/fsck.c:447 +#: builtin/fsck.c:438 #, c-format msgid "root %s" msgstr "根 %s" -#: builtin/fsck.c:455 +#: builtin/fsck.c:446 #, c-format msgid "tagged %s %s (%s) in %s" msgstr "标记 %s %s (%s) 于 %s" -#: builtin/fsck.c:484 +#: builtin/fsck.c:475 #, c-format msgid "%s: object corrupt or missing" msgstr "%s：对象损坏或丢失" -#: builtin/fsck.c:509 +#: builtin/fsck.c:500 #, c-format msgid "%s: invalid reflog entry %s" msgstr "%s：无效的引用日志条目 %s" -#: builtin/fsck.c:523 +#: builtin/fsck.c:514 #, c-format msgid "Checking reflog %s->%s" msgstr "正在检查引用日志 %s->%s" -#: builtin/fsck.c:557 +#: builtin/fsck.c:548 #, c-format msgid "%s: invalid sha1 pointer %s" msgstr "%s：无效的 sha1 指针 %s" -#: builtin/fsck.c:564 +#: builtin/fsck.c:555 #, c-format msgid "%s: not a commit" msgstr "%s：不是一个提交" -#: builtin/fsck.c:619 +#: builtin/fsck.c:609 msgid "notice: No default references" msgstr "注意：无默认引用" -#: builtin/fsck.c:634 +#: builtin/fsck.c:624 #, c-format msgid "%s: object corrupt or missing: %s" msgstr "%s：对象损坏或丢失：%s" -#: builtin/fsck.c:647 +#: builtin/fsck.c:637 #, c-format msgid "%s: object could not be parsed: %s" msgstr "%s：不能解析对象：%s" -#: builtin/fsck.c:667 +#: builtin/fsck.c:657 #, c-format msgid "bad sha1 file: %s" msgstr "坏的 sha1 文件：%s" -#: builtin/fsck.c:682 +#: builtin/fsck.c:672 msgid "Checking object directory" msgstr "正在检查对象目录" -#: builtin/fsck.c:685 +#: builtin/fsck.c:675 msgid "Checking object directories" msgstr "正在检查对象目录" -#: builtin/fsck.c:700 +#: builtin/fsck.c:690 #, c-format msgid "Checking %s link" msgstr "正在检查 %s 链接" -#: builtin/fsck.c:705 builtin/index-pack.c:842 +#: builtin/fsck.c:695 builtin/index-pack.c:842 #, c-format msgid "invalid %s" msgstr "无效的 %s" -#: builtin/fsck.c:712 +#: builtin/fsck.c:702 #, c-format msgid "%s points to something strange (%s)" msgstr "%s 指向奇怪的东西（%s）" -#: builtin/fsck.c:718 +#: builtin/fsck.c:708 #, c-format msgid "%s: detached HEAD points at nothing" msgstr "%s：分离头指针的指向不存在" -#: builtin/fsck.c:722 +#: builtin/fsck.c:712 #, c-format msgid "notice: %s points to an unborn branch (%s)" msgstr "注意：%s 指向一个尚未诞生的分支（%s）" -#: builtin/fsck.c:734 +#: builtin/fsck.c:724 msgid "Checking cache tree" msgstr "正在检查缓存树" -#: builtin/fsck.c:739 +#: builtin/fsck.c:729 #, c-format msgid "%s: invalid sha1 pointer in cache-tree" msgstr "%s：cache-tree 中无效的 sha1 指针" -#: builtin/fsck.c:750 +#: builtin/fsck.c:738 msgid "non-tree in cache-tree" msgstr "cache-tree 中非树对象" -#: builtin/fsck.c:781 +#: builtin/fsck.c:769 msgid "git fsck [] [...]" msgstr "git fsck [<选项>] [<对象>...]" -#: builtin/fsck.c:787 +#: builtin/fsck.c:775 msgid "show unreachable objects" msgstr "显示不可达的对象" -#: builtin/fsck.c:788 +#: builtin/fsck.c:776 msgid "show dangling objects" msgstr "显示悬空的对象" -#: builtin/fsck.c:789 +#: builtin/fsck.c:777 msgid "report tags" msgstr "报告标签" -#: builtin/fsck.c:790 +#: builtin/fsck.c:778 msgid "report root nodes" msgstr "报告根节点" -#: builtin/fsck.c:791 +#: builtin/fsck.c:779 msgid "make index objects head nodes" msgstr "将索引亦作为检查的头节点" -#: builtin/fsck.c:792 +#: builtin/fsck.c:780 msgid "make reflogs head nodes (default)" msgstr "将引用日志作为检查的头节点（默认）" -#: builtin/fsck.c:793 +#: builtin/fsck.c:781 msgid "also consider packs and alternate objects" msgstr "也考虑包和备用对象" -#: builtin/fsck.c:794 +#: builtin/fsck.c:782 msgid "check only connectivity" msgstr "仅检查连通性" -#: builtin/fsck.c:795 +#: builtin/fsck.c:783 msgid "enable more strict checking" msgstr "启用更严格的检查" -#: builtin/fsck.c:797 +#: builtin/fsck.c:785 msgid "write dangling objects in .git/lost-found" msgstr "将悬空对象写入 .git/lost-found 中" -#: builtin/fsck.c:798 builtin/prune.c:132 +#: builtin/fsck.c:786 builtin/prune.c:132 msgid "show progress" msgstr "显示进度" -#: builtin/fsck.c:799 +#: builtin/fsck.c:787 msgid "show verbose names for reachable objects" msgstr "显示可达对象的详细名称" -#: builtin/fsck.c:859 builtin/index-pack.c:225 +#: builtin/fsck.c:846 builtin/index-pack.c:225 msgid "Checking objects" msgstr "正在检查对象" -#: builtin/fsck.c:887 +#: builtin/fsck.c:874 #, c-format msgid "%s: object missing" msgstr "%s：对象缺失" -#: builtin/fsck.c:899 +#: builtin/fsck.c:885 #, c-format msgid "invalid parameter: expected sha1, got '%s'" msgstr "无效的参数：期望 sha1，得到 '%s'" @@ -13829,7 +14357,7 @@ msgstr "用掉了超过可用的字节" msgid "pack too large for current definition of off_t" msgstr "包太大超过了当前 off_t 的定义" -#: builtin/index-pack.c:291 builtin/unpack-objects.c:94 +#: builtin/index-pack.c:291 builtin/unpack-objects.c:95 msgid "pack exceeds maximum allowed size" msgstr "包超过了最大允许值" @@ -14069,7 +14597,7 @@ msgstr "--stdin 需要一个 git 仓库" msgid "--verify with no packfile name given" msgstr "--verify 没有提供包文件名参数" -#: builtin/index-pack.c:1833 builtin/unpack-objects.c:580 +#: builtin/index-pack.c:1833 builtin/unpack-objects.c:581 msgid "fsck error in pack objects" msgstr "在打包对象中 fsck 检查出错" @@ -14250,121 +14778,126 @@ msgstr "--trailer 和 --only-input 同时使用没有意义" msgid "no input file given for in-place editing" msgstr "没有给出要原位编辑的文件" -#: builtin/log.c:55 +#: builtin/log.c:56 msgid "git log [] [] [[--] ...]" msgstr "git log [<选项>] [<版本范围>] [[--] <路径>...]" -#: builtin/log.c:56 +#: builtin/log.c:57 msgid "git show [] ..." msgstr "git show [<选项>] <对象>..." -#: builtin/log.c:109 +#: builtin/log.c:110 #, c-format msgid "invalid --decorate option: %s" msgstr "无效的 --decorate 选项：%s" -#: builtin/log.c:173 +#: builtin/log.c:174 msgid "show source" msgstr "显示源" -#: builtin/log.c:174 +#: builtin/log.c:175 msgid "Use mail map file" msgstr "使用邮件映射文件" -#: builtin/log.c:176 +#: builtin/log.c:177 msgid "only decorate refs that match " msgstr "只修饰与 <模式> 匹配的引用" -#: builtin/log.c:178 +#: builtin/log.c:179 msgid "do not decorate refs that match " msgstr "不修饰和 <模式> 匹配的引用" -#: builtin/log.c:179 +#: builtin/log.c:180 msgid "decorate options" msgstr "修饰选项" -#: builtin/log.c:182 +#: builtin/log.c:183 msgid "Process line range n,m in file, counting from 1" msgstr "处理文件中第 n 到 m 之间的行，从 1 开始" -#: builtin/log.c:280 +#: builtin/log.c:281 #, c-format msgid "Final output: %d %s\n" msgstr "最终输出：%d %s\n" -#: builtin/log.c:534 +#: builtin/log.c:535 #, c-format msgid "git show %s: bad file" msgstr "git show %s: 损坏的文件" -#: builtin/log.c:549 builtin/log.c:644 +#: builtin/log.c:550 builtin/log.c:645 #, c-format msgid "could not read object %s" msgstr "不能读取对象 %s" -#: builtin/log.c:669 +#: builtin/log.c:670 #, c-format msgid "unknown type: %d" msgstr "未知类型：%d" -#: builtin/log.c:792 +#: builtin/log.c:814 +#, c-format +msgid "%s: invalid cover from description mode" +msgstr "%s：从描述生成附函的模式无效" + +#: builtin/log.c:821 msgid "format.headers without value" msgstr "format.headers 没有值" -#: builtin/log.c:909 +#: builtin/log.c:936 msgid "name of output directory is too long" msgstr "输出目录名太长" -#: builtin/log.c:925 +#: builtin/log.c:952 #, c-format msgid "cannot open patch file %s" msgstr "无法打开补丁文件 %s" -#: builtin/log.c:942 +#: builtin/log.c:969 msgid "need exactly one range" msgstr "只需要一个范围" -#: builtin/log.c:952 +#: builtin/log.c:979 msgid "not a range" msgstr "不是一个范围" -#: builtin/log.c:1075 +#: builtin/log.c:1143 msgid "cover letter needs email format" msgstr "附函需要邮件地址格式" -#: builtin/log.c:1081 +#: builtin/log.c:1149 msgid "failed to create cover-letter file" msgstr "无法创建附函文件" -#: builtin/log.c:1160 +#: builtin/log.c:1228 #, c-format msgid "insane in-reply-to: %s" msgstr "不正常的 in-reply-to：%s" -#: builtin/log.c:1187 +#: builtin/log.c:1255 msgid "git format-patch [] [ | ]" msgstr "git format-patch [<选项>] [<从> | <版本范围>]" -#: builtin/log.c:1245 +#: builtin/log.c:1313 msgid "two output directories?" msgstr "两个输出目录？" -#: builtin/log.c:1356 builtin/log.c:2116 builtin/log.c:2118 builtin/log.c:2130 +#: builtin/log.c:1424 builtin/log.c:2197 builtin/log.c:2199 builtin/log.c:2211 #, c-format msgid "unknown commit %s" msgstr "未知提交 %s" -#: builtin/log.c:1366 builtin/replace.c:58 builtin/replace.c:207 +#: builtin/log.c:1434 builtin/replace.c:58 builtin/replace.c:207 #: builtin/replace.c:210 #, c-format msgid "failed to resolve '%s' as a valid ref" msgstr "无法将 '%s' 解析为一个有效引用" -#: builtin/log.c:1371 +#: builtin/log.c:1439 msgid "could not find exact merge base" msgstr "不能找到准确的合并基线" -#: builtin/log.c:1375 +#: builtin/log.c:1443 msgid "" "failed to get upstream, if you want to record base commit automatically,\n" "please use git branch --set-upstream-to to track a remote branch.\n" @@ -14374,267 +14907,275 @@ msgstr "" "git branch --set-upstream-to 来跟踪一个远程分支。或者你可以通过\n" "参数 --base=<基线提交> 手动指定一个基线提交" -#: builtin/log.c:1395 +#: builtin/log.c:1463 msgid "failed to find exact merge base" msgstr "无法找到准确的合并基线" -#: builtin/log.c:1406 +#: builtin/log.c:1474 msgid "base commit should be the ancestor of revision list" msgstr "基线提交应该是版本列表的祖先" -#: builtin/log.c:1410 +#: builtin/log.c:1478 msgid "base commit shouldn't be in revision list" msgstr "基线提交不应该出现在版本列表中" -#: builtin/log.c:1463 +#: builtin/log.c:1531 msgid "cannot get patch id" msgstr "无法得到补丁 id" -#: builtin/log.c:1515 +#: builtin/log.c:1583 msgid "failed to infer range-diff ranges" msgstr "无法推断 range-diff 范围" -#: builtin/log.c:1560 +#: builtin/log.c:1629 msgid "use [PATCH n/m] even with a single patch" msgstr "使用 [PATCH n/m]，即使只有一个补丁" -#: builtin/log.c:1563 +#: builtin/log.c:1632 msgid "use [PATCH] even with multiple patches" msgstr "使用 [PATCH]，即使有多个补丁" -#: builtin/log.c:1567 +#: builtin/log.c:1636 msgid "print patches to standard out" msgstr "打印补丁到标准输出" -#: builtin/log.c:1569 +#: builtin/log.c:1638 msgid "generate a cover letter" msgstr "生成一封附函" -#: builtin/log.c:1571 +#: builtin/log.c:1640 msgid "use simple number sequence for output file names" msgstr "使用简单的数字序列作为输出文件名" -#: builtin/log.c:1572 +#: builtin/log.c:1641 msgid "sfx" msgstr "后缀" -#: builtin/log.c:1573 +#: builtin/log.c:1642 msgid "use instead of '.patch'" msgstr "使用 <后缀> 代替 '.patch'" -#: builtin/log.c:1575 +#: builtin/log.c:1644 msgid "start numbering patches at instead of 1" msgstr "补丁以 开始编号，而不是1" -#: builtin/log.c:1577 +#: builtin/log.c:1646 msgid "mark the series as Nth re-roll" msgstr "标记补丁系列是第几次重制" -#: builtin/log.c:1579 +#: builtin/log.c:1648 msgid "Use [RFC PATCH] instead of [PATCH]" msgstr "使用 [RFC PATCH] 代替 [PATCH]" -#: builtin/log.c:1582 +#: builtin/log.c:1651 +msgid "cover-from-description-mode" +msgstr "从分支描述获取附函的模式" + +#: builtin/log.c:1652 +msgid "generate parts of a cover letter based on a branch's description" +msgstr "基于一个分支描述生成部分附函" + +#: builtin/log.c:1654 msgid "Use [] instead of [PATCH]" msgstr "使用 [<前缀>] 代替 [PATCH]" -#: builtin/log.c:1585 +#: builtin/log.c:1657 msgid "store resulting files in " msgstr "把结果文件存储在 <目录>" -#: builtin/log.c:1588 +#: builtin/log.c:1660 msgid "don't strip/add [PATCH]" msgstr "不删除/添加 [PATCH]" -#: builtin/log.c:1591 +#: builtin/log.c:1663 msgid "don't output binary diffs" msgstr "不输出二进制差异" -#: builtin/log.c:1593 +#: builtin/log.c:1665 msgid "output all-zero hash in From header" msgstr "在 From 头信息中输出全为零的哈希值" -#: builtin/log.c:1595 +#: builtin/log.c:1667 msgid "don't include a patch matching a commit upstream" msgstr "不包含已在上游提交中的补丁" -#: builtin/log.c:1597 +#: builtin/log.c:1669 msgid "show patch format instead of default (patch + stat)" msgstr "显示纯补丁格式而非默认的（补丁+状态）" -#: builtin/log.c:1599 +#: builtin/log.c:1671 msgid "Messaging" msgstr "邮件发送" -#: builtin/log.c:1600 +#: builtin/log.c:1672 msgid "header" msgstr "header" -#: builtin/log.c:1601 +#: builtin/log.c:1673 msgid "add email header" msgstr "添加邮件头" -#: builtin/log.c:1602 builtin/log.c:1604 +#: builtin/log.c:1674 builtin/log.c:1676 msgid "email" msgstr "邮件地址" -#: builtin/log.c:1602 +#: builtin/log.c:1674 msgid "add To: header" msgstr "添加收件人" -#: builtin/log.c:1604 +#: builtin/log.c:1676 msgid "add Cc: header" msgstr "添加抄送" -#: builtin/log.c:1606 +#: builtin/log.c:1678 msgid "ident" msgstr "标识" -#: builtin/log.c:1607 +#: builtin/log.c:1679 msgid "set From address to (or committer ident if absent)" msgstr "将 From 地址设置为 <标识>（如若不提供，则用提交者 ID 做为地址）" -#: builtin/log.c:1609 +#: builtin/log.c:1681 msgid "message-id" msgstr "邮件标识" -#: builtin/log.c:1610 +#: builtin/log.c:1682 msgid "make first mail a reply to " msgstr "使第一封邮件作为对 <邮件标识> 的回复" -#: builtin/log.c:1611 builtin/log.c:1614 +#: builtin/log.c:1683 builtin/log.c:1686 msgid "boundary" msgstr "边界" -#: builtin/log.c:1612 +#: builtin/log.c:1684 msgid "attach the patch" msgstr "附件方式添加补丁" -#: builtin/log.c:1615 +#: builtin/log.c:1687 msgid "inline the patch" msgstr "内联显示补丁" -#: builtin/log.c:1619 +#: builtin/log.c:1691 msgid "enable message threading, styles: shallow, deep" msgstr "启用邮件线索，风格：浅，深" -#: builtin/log.c:1621 +#: builtin/log.c:1693 msgid "signature" msgstr "签名" -#: builtin/log.c:1622 +#: builtin/log.c:1694 msgid "add a signature" msgstr "添加一个签名" -#: builtin/log.c:1623 +#: builtin/log.c:1695 msgid "base-commit" msgstr "基线提交" -#: builtin/log.c:1624 +#: builtin/log.c:1696 msgid "add prerequisite tree info to the patch series" msgstr "为补丁列表添加前置树信息" -#: builtin/log.c:1626 +#: builtin/log.c:1698 msgid "add a signature from a file" msgstr "从文件添加一个签名" -#: builtin/log.c:1627 +#: builtin/log.c:1699 msgid "don't print the patch filenames" msgstr "不要打印补丁文件名" -#: builtin/log.c:1629 +#: builtin/log.c:1701 msgid "show progress while generating patches" msgstr "在生成补丁时显示进度" -#: builtin/log.c:1631 +#: builtin/log.c:1703 msgid "show changes against in cover letter or single patch" msgstr "在附函或单个补丁中显示和 的差异" -#: builtin/log.c:1634 +#: builtin/log.c:1706 msgid "show changes against in cover letter or single patch" msgstr "在附函或单个补丁中显示和 的差异" -#: builtin/log.c:1636 +#: builtin/log.c:1708 msgid "percentage by which creation is weighted" msgstr "创建权重的百分比" -#: builtin/log.c:1711 +#: builtin/log.c:1792 #, c-format msgid "invalid ident line: %s" msgstr "包含无效的身份标识：%s" -#: builtin/log.c:1726 +#: builtin/log.c:1807 msgid "-n and -k are mutually exclusive" msgstr "-n 和 -k 互斥" -#: builtin/log.c:1728 +#: builtin/log.c:1809 msgid "--subject-prefix/--rfc and -k are mutually exclusive" msgstr "--subject-prefix/--rfc 和 -k 互斥" -#: builtin/log.c:1736 +#: builtin/log.c:1817 msgid "--name-only does not make sense" msgstr "--name-only 无意义" -#: builtin/log.c:1738 +#: builtin/log.c:1819 msgid "--name-status does not make sense" msgstr "--name-status 无意义" -#: builtin/log.c:1740 +#: builtin/log.c:1821 msgid "--check does not make sense" msgstr "--check 无意义" -#: builtin/log.c:1773 +#: builtin/log.c:1854 msgid "standard output, or directory, which one?" msgstr "标准输出或目录，哪一个？" -#: builtin/log.c:1877 +#: builtin/log.c:1958 msgid "--interdiff requires --cover-letter or single patch" msgstr "--interdiff 需要 --cover-letter 或单一补丁" -#: builtin/log.c:1881 +#: builtin/log.c:1962 msgid "Interdiff:" msgstr "版本间差异：" -#: builtin/log.c:1882 +#: builtin/log.c:1963 #, c-format msgid "Interdiff against v%d:" msgstr "对 v%d 的版本差异：" -#: builtin/log.c:1888 +#: builtin/log.c:1969 msgid "--creation-factor requires --range-diff" msgstr "--creation-factor 需要 --range-diff" -#: builtin/log.c:1892 +#: builtin/log.c:1973 msgid "--range-diff requires --cover-letter or single patch" msgstr "--range-diff 需要 --cover-letter 或单一补丁" -#: builtin/log.c:1900 +#: builtin/log.c:1981 msgid "Range-diff:" msgstr "范围差异：" -#: builtin/log.c:1901 +#: builtin/log.c:1982 #, c-format msgid "Range-diff against v%d:" msgstr "对 v%d 的范围差异：" -#: builtin/log.c:1912 +#: builtin/log.c:1993 #, c-format msgid "unable to read signature file '%s'" msgstr "无法读取签名文件 '%s'" -#: builtin/log.c:1948 +#: builtin/log.c:2029 msgid "Generating patches" msgstr "生成补丁" -#: builtin/log.c:1992 +#: builtin/log.c:2073 msgid "failed to create output files" msgstr "无法创建输出文件" -#: builtin/log.c:2051 +#: builtin/log.c:2132 msgid "git cherry [-v] [ [ []]]" msgstr "git cherry [-v] [<上游> [<头> [<限制>]]]" -#: builtin/log.c:2105 +#: builtin/log.c:2186 #, c-format msgid "" "Could not find a tracked remote branch, please specify manually.\n" @@ -14734,11 +15275,11 @@ msgstr "如果任何 <文件> 都不在索引区，视为错误" #: builtin/ls-files.c:576 msgid "tree-ish" -msgstr "树或提交" +msgstr "树对象" #: builtin/ls-files.c:577 msgid "pretend that paths removed since are still present" -msgstr "假装自从 <树或提交> 之后删除的路径仍然存在" +msgstr "假装自从 <树对象> 之后删除的路径仍然存在" #: builtin/ls-files.c:579 msgid "show debugging data" @@ -14758,7 +15299,7 @@ msgstr "" msgid "do not print remote URL" msgstr "不打印远程 URL" -#: builtin/ls-remote.c:60 builtin/ls-remote.c:62 builtin/rebase.c:1488 +#: builtin/ls-remote.c:60 builtin/ls-remote.c:62 builtin/rebase.c:1518 msgid "exec" msgstr "exec" @@ -14792,7 +15333,7 @@ msgstr "除了显示指向的对象外，显示指向的引用名" #: builtin/ls-tree.c:30 msgid "git ls-tree [] [...]" -msgstr "git ls-tree [<选项>] <树或提交> [<路径>...]" +msgstr "git ls-tree [<选项>] <树对象> [<路径>...]" #: builtin/ls-tree.c:128 msgid "only show trees" @@ -14908,7 +15449,7 @@ msgid "verify that the named commit has a valid GPG signature" msgstr "验证指定的提交是否包含一个有效的 GPG 签名" #: builtin/merge.c:266 builtin/notes.c:787 builtin/pull.c:187 -#: builtin/rebase.c:493 builtin/rebase.c:1501 builtin/revert.c:114 +#: builtin/rebase.c:512 builtin/rebase.c:1531 builtin/revert.c:114 msgid "strategy" msgstr "策略" @@ -15340,31 +15881,29 @@ msgstr "允许创建一个以上的树" #: builtin/multi-pack-index.c:9 msgid "" -"git multi-pack-index [--object-dir=] (write|verify|expire|repack --" -"batch-size=)" -msgstr "" -"git multi-pack-index [--object-dir=<目录>] (write|verify|expire|repack --" -"batch-size=<大小>)" +"git multi-pack-index [] (write|verify|expire|repack --batch-" +"size=)" +msgstr "git multi-pack-index [<选项>] (write|verify|expire|repack --batch-size=<大小>)" -#: builtin/multi-pack-index.c:23 +#: builtin/multi-pack-index.c:26 msgid "object directory containing set of packfile and pack-index pairs" msgstr "包含成对包文件和包索引的对象目录" -#: builtin/multi-pack-index.c:25 +#: builtin/multi-pack-index.c:29 msgid "" "during repack, collect pack-files of smaller size into a batch that is " "larger than this size" msgstr "在 repack 期间，将较小尺寸的包文件收集到大于此大小的批次中" -#: builtin/multi-pack-index.c:43 builtin/prune-packed.c:67 +#: builtin/multi-pack-index.c:50 builtin/prune-packed.c:67 msgid "too many arguments" msgstr "太多参数" -#: builtin/multi-pack-index.c:52 +#: builtin/multi-pack-index.c:60 msgid "--batch-size option is only for 'repack' subcommand" msgstr "--batch-size 选项仅用于 'repack' 子命令" -#: builtin/multi-pack-index.c:61 +#: builtin/multi-pack-index.c:69 #, c-format msgid "unrecognized subcommand: %s" msgstr "未识别的子命令：%s" @@ -15456,52 +15995,52 @@ msgstr "%s，源=%s，目标=%s" msgid "Renaming %s to %s\n" msgstr "重命名 %s 至 %s\n" -#: builtin/mv.c:277 builtin/remote.c:717 builtin/repack.c:511 +#: builtin/mv.c:277 builtin/remote.c:716 builtin/repack.c:518 #, c-format msgid "renaming '%s' failed" msgstr "重命名 '%s' 失败" -#: builtin/name-rev.c:356 +#: builtin/name-rev.c:403 msgid "git name-rev [] ..." msgstr "git name-rev [<选项>] <提交>..." -#: builtin/name-rev.c:357 +#: builtin/name-rev.c:404 msgid "git name-rev [] --all" msgstr "git name-rev [<选项>] --all" -#: builtin/name-rev.c:358 +#: builtin/name-rev.c:405 msgid "git name-rev [] --stdin" msgstr "git name-rev [<选项>] --stdin" -#: builtin/name-rev.c:415 +#: builtin/name-rev.c:462 msgid "print only names (no SHA-1)" msgstr "只打印名称（无 SHA-1）" -#: builtin/name-rev.c:416 +#: builtin/name-rev.c:463 msgid "only use tags to name the commits" msgstr "只使用标签来命名提交" -#: builtin/name-rev.c:418 +#: builtin/name-rev.c:465 msgid "only use refs matching " msgstr "只使用和 <模式> 相匹配的引用" -#: builtin/name-rev.c:420 +#: builtin/name-rev.c:467 msgid "ignore refs matching " msgstr "忽略和 <模式> 相匹配的引用" -#: builtin/name-rev.c:422 +#: builtin/name-rev.c:469 msgid "list all commits reachable from all refs" msgstr "列出可以从所有引用访问的提交" -#: builtin/name-rev.c:423 +#: builtin/name-rev.c:470 msgid "read from stdin" msgstr "从标准输入读取" -#: builtin/name-rev.c:424 +#: builtin/name-rev.c:471 msgid "allow to print `undefined` names (default)" msgstr "允许打印 `未定义` 的名称（默认）" -#: builtin/name-rev.c:430 +#: builtin/name-rev.c:477 msgid "dereference tags in the input (internal use)" msgstr "反向解析输入中的标签（内部使用）" @@ -15965,7 +16504,7 @@ msgstr "禁用 bitmap 写入，因为 pack.packSizeLimit 设置使得包被切 msgid "Writing objects" msgstr "写入对象中" -#: builtin/pack-objects.c:917 builtin/update-index.c:89 +#: builtin/pack-objects.c:917 builtin/update-index.c:90 #, c-format msgid "failed to stat %s" msgstr "对 %s 调用 stat 失败" @@ -16095,22 +16634,6 @@ msgstr "不支持的索引版本 %s" msgid "bad index version '%s'" msgstr "坏的索引版本 '%s'" -#: builtin/pack-objects.c:3228 -msgid "do not show progress meter" -msgstr "不显示进度表" - -#: builtin/pack-objects.c:3230 -msgid "show progress meter" -msgstr "显示进度表" - -#: builtin/pack-objects.c:3232 -msgid "show progress meter during object writing phase" -msgstr "在对象写入阶段显示进度表" - -#: builtin/pack-objects.c:3235 -msgid "similar to --all-progress when progress meter is shown" -msgstr "当进度表显示时类似于 --all-progress" - #: builtin/pack-objects.c:3236 msgid "[,]" msgstr "<版本>[,<偏移>]" @@ -16355,7 +16878,7 @@ msgstr "和合并相关的选项" msgid "incorporate changes by rebasing rather than merging" msgstr "使用变基操作取代合并操作以合入修改" -#: builtin/pull.c:177 builtin/rebase.c:448 builtin/revert.c:126 +#: builtin/pull.c:177 builtin/rebase.c:467 builtin/revert.c:126 msgid "allow fast-forward" msgstr "允许快进式" @@ -16407,7 +16930,7 @@ msgstr "" "您要求从远程 '%s' 拉取，但是未指定一个分支。因为这不是当前\n" "分支默认的远程仓库，您必须在命令行中指定一个分支名。" -#: builtin/pull.c:448 builtin/rebase.c:1347 git-parse-remote.sh:73 +#: builtin/pull.c:448 builtin/rebase.c:1375 git-parse-remote.sh:73 msgid "You are not currently on a branch." msgstr "您当前不在一个分支上。" @@ -16424,7 +16947,7 @@ msgid "See git-pull(1) for details." msgstr "详见 git-pull(1)。" #: builtin/pull.c:455 builtin/pull.c:461 builtin/pull.c:470 -#: builtin/rebase.c:1353 git-parse-remote.sh:64 +#: builtin/rebase.c:1381 git-parse-remote.sh:64 msgid "" msgstr "<远程>" @@ -16433,7 +16956,7 @@ msgstr "<远程>" msgid "" msgstr "<分支>" -#: builtin/pull.c:463 builtin/rebase.c:1345 git-parse-remote.sh:75 +#: builtin/pull.c:463 builtin/rebase.c:1373 git-parse-remote.sh:75 msgid "There is no tracking information for the current branch." msgstr "当前分支没有跟踪信息。" @@ -16519,15 +17042,15 @@ msgstr "本地子模组中有修改，无法变基" msgid "git push [] [ [...]]" msgstr "git push [<选项>] [<仓库> [<引用规格>...]]" -#: builtin/push.c:111 +#: builtin/push.c:112 msgid "tag shorthand without " msgstr "标签后面未提供 <标签> 参数" -#: builtin/push.c:121 +#: builtin/push.c:122 msgid "--delete only accepts plain target ref names" msgstr "--delete 只接受简单的目标引用名" -#: builtin/push.c:167 +#: builtin/push.c:168 msgid "" "\n" "To choose either option permanently, see push.default in 'git help config'." @@ -16535,7 +17058,7 @@ msgstr "" "\n" "为了永久地选择任一选项，参见 'git help config' 中的 push.default。" -#: builtin/push.c:170 +#: builtin/push.c:171 #, c-format msgid "" "The upstream branch of your current branch does not match\n" @@ -16559,7 +17082,7 @@ msgstr "" " git push %s HEAD\n" "%s" -#: builtin/push.c:185 +#: builtin/push.c:186 #, c-format msgid "" "You are not currently on a branch.\n" @@ -16573,7 +17096,7 @@ msgstr "" "\n" " git push %s HEAD:<远程分支名字>\n" -#: builtin/push.c:199 +#: builtin/push.c:200 #, c-format msgid "" "The current branch %s has no upstream branch.\n" @@ -16586,12 +17109,12 @@ msgstr "" "\n" " git push --set-upstream %s %s\n" -#: builtin/push.c:207 +#: builtin/push.c:208 #, c-format msgid "The current branch %s has multiple upstream branches, refusing to push." msgstr "当前分支 %s 有多个上游分支，拒绝推送。" -#: builtin/push.c:210 +#: builtin/push.c:211 #, c-format msgid "" "You are pushing to remote '%s', which is not the upstream of\n" @@ -16601,12 +17124,12 @@ msgstr "" "您正推送至远程 '%s'（其并非当前分支 '%s' 的上游），\n" "而没有告诉我要推送什么、更新哪个远程分支。" -#: builtin/push.c:269 +#: builtin/push.c:270 msgid "" "You didn't specify any refspecs to push, and push.default is \"nothing\"." msgstr "您没有为推送指定任何引用规格，并且 push.default 为 \"nothing\"。" -#: builtin/push.c:276 +#: builtin/push.c:277 msgid "" "Updates were rejected because the tip of your current branch is behind\n" "its remote counterpart. Integrate the remote changes (e.g.\n" @@ -16617,7 +17140,7 @@ msgstr "" "再次推送前，先与远程变更合并（如 'git pull ...'）。详见\n" "'git push --help' 中的 'Note about fast-forwards' 小节。" -#: builtin/push.c:282 +#: builtin/push.c:283 msgid "" "Updates were rejected because a pushed branch tip is behind its remote\n" "counterpart. Check out this branch and integrate the remote changes\n" @@ -16628,7 +17151,7 @@ msgstr "" "检出该分支并整合远程变更（如 'git pull ...'），然后再推送。详见\n" "'git push --help' 中的 'Note about fast-forwards' 小节。" -#: builtin/push.c:288 +#: builtin/push.c:289 msgid "" "Updates were rejected because the remote contains work that you do\n" "not have locally. This is usually caused by another repository pushing\n" @@ -16641,11 +17164,11 @@ msgstr "" "（如 'git pull ...'）。\n" "详见 'git push --help' 中的 'Note about fast-forwards' 小节。" -#: builtin/push.c:295 +#: builtin/push.c:296 msgid "Updates were rejected because the tag already exists in the remote." msgstr "更新被拒绝，因为该标签在远程已经存在。" -#: builtin/push.c:298 +#: builtin/push.c:299 msgid "" "You cannot update a remote ref that points at a non-commit object,\n" "or update a remote ref to make it point at a non-commit object,\n" @@ -16654,99 +17177,99 @@ msgstr "" "如果不使用 '--force' 参数，您不能更新一个指向非提交对象的远程引用，\n" "也不能更新远程引用让其指向一个非提交对象。\n" -#: builtin/push.c:359 +#: builtin/push.c:360 #, c-format msgid "Pushing to %s\n" msgstr "推送到 %s\n" -#: builtin/push.c:366 +#: builtin/push.c:367 #, c-format msgid "failed to push some refs to '%s'" msgstr "推送一些引用到 '%s' 失败" -#: builtin/push.c:541 +#: builtin/push.c:542 msgid "repository" msgstr "仓库" -#: builtin/push.c:542 builtin/send-pack.c:164 +#: builtin/push.c:543 builtin/send-pack.c:164 msgid "push all refs" msgstr "推送所有引用" -#: builtin/push.c:543 builtin/send-pack.c:166 +#: builtin/push.c:544 builtin/send-pack.c:166 msgid "mirror all refs" msgstr "镜像所有引用" -#: builtin/push.c:545 +#: builtin/push.c:546 msgid "delete refs" msgstr "删除引用" -#: builtin/push.c:546 +#: builtin/push.c:547 msgid "push tags (can't be used with --all or --mirror)" msgstr "推送标签（不能使用 --all or --mirror）" -#: builtin/push.c:549 builtin/send-pack.c:167 +#: builtin/push.c:550 builtin/send-pack.c:167 msgid "force updates" msgstr "强制更新" -#: builtin/push.c:551 builtin/send-pack.c:181 +#: builtin/push.c:552 builtin/send-pack.c:181 msgid ":" msgstr "<引用名>:<期望值>" -#: builtin/push.c:552 builtin/send-pack.c:182 +#: builtin/push.c:553 builtin/send-pack.c:182 msgid "require old value of ref to be at this value" msgstr "要求引用旧的取值为设定值" -#: builtin/push.c:555 +#: builtin/push.c:556 msgid "control recursive pushing of submodules" msgstr "控制子模组的递归推送" -#: builtin/push.c:557 builtin/send-pack.c:175 +#: builtin/push.c:558 builtin/send-pack.c:175 msgid "use thin pack" msgstr "使用精简打包" -#: builtin/push.c:558 builtin/push.c:559 builtin/send-pack.c:161 +#: builtin/push.c:559 builtin/push.c:560 builtin/send-pack.c:161 #: builtin/send-pack.c:162 msgid "receive pack program" msgstr "接收包程序" -#: builtin/push.c:560 +#: builtin/push.c:561 msgid "set upstream for git pull/status" msgstr "设置 git pull/status 的上游" -#: builtin/push.c:563 +#: builtin/push.c:564 msgid "prune locally removed refs" msgstr "清除本地删除的引用" -#: builtin/push.c:565 +#: builtin/push.c:566 msgid "bypass pre-push hook" msgstr "绕过 pre-push 钩子" -#: builtin/push.c:566 +#: builtin/push.c:567 msgid "push missing but relevant tags" msgstr "推送缺失但有关的标签" -#: builtin/push.c:569 builtin/send-pack.c:169 +#: builtin/push.c:570 builtin/send-pack.c:169 msgid "GPG sign the push" msgstr "用 GPG 为推送签名" -#: builtin/push.c:571 builtin/send-pack.c:176 +#: builtin/push.c:572 builtin/send-pack.c:176 msgid "request atomic transaction on remote side" msgstr "需要远端支持原子事务" -#: builtin/push.c:589 +#: builtin/push.c:590 msgid "--delete is incompatible with --all, --mirror and --tags" msgstr "--delete 与 --all、--mirror 及 --tags 不兼容" -#: builtin/push.c:591 +#: builtin/push.c:592 msgid "--delete doesn't make sense without any refs" msgstr "--delete 未接任何引用没有意义" -#: builtin/push.c:611 +#: builtin/push.c:612 #, c-format msgid "bad repository '%s'" msgstr "坏的仓库 '%s'" -#: builtin/push.c:612 +#: builtin/push.c:613 msgid "" "No configured push destination.\n" "Either specify the URL from the command-line or configure a remote " @@ -16767,27 +17290,27 @@ msgstr "" "\n" " git push <名称>\n" -#: builtin/push.c:627 +#: builtin/push.c:628 msgid "--all and --tags are incompatible" msgstr "--all 和 --tags 不兼容" -#: builtin/push.c:629 +#: builtin/push.c:630 msgid "--all can't be combined with refspecs" msgstr "--all 不能和引用规格同时使用" -#: builtin/push.c:633 +#: builtin/push.c:634 msgid "--mirror and --tags are incompatible" msgstr "--mirror 和 --tags 不兼容" -#: builtin/push.c:635 +#: builtin/push.c:636 msgid "--mirror can't be combined with refspecs" msgstr "--mirror 不能和引用规格同时使用" -#: builtin/push.c:638 +#: builtin/push.c:639 msgid "--all and --mirror are incompatible" msgstr "--all 和 --mirror 不兼容" -#: builtin/push.c:642 +#: builtin/push.c:643 msgid "push options must not have new line characters" msgstr "推送选项不能有换行符" @@ -16803,24 +17326,32 @@ msgstr "git range-diff [<选项>] ..." msgid "git range-diff [] " msgstr "git range-diff [<选项>] " -#: builtin/range-diff.c:21 +#: builtin/range-diff.c:22 msgid "Percentage by which creation is weighted" msgstr "创建权重的百分比" -#: builtin/range-diff.c:23 +#: builtin/range-diff.c:24 msgid "use simple diff colors" msgstr "使用简单差异颜色" -#: builtin/range-diff.c:46 builtin/range-diff.c:50 +#: builtin/range-diff.c:26 +msgid "notes" +msgstr "注解" + +#: builtin/range-diff.c:26 +msgid "passed to 'git log'" +msgstr "传递给 'git log'" + +#: builtin/range-diff.c:50 builtin/range-diff.c:54 #, c-format msgid "no .. in range: '%s'" msgstr "没有在范围中使用 ..：'%s'" -#: builtin/range-diff.c:60 +#: builtin/range-diff.c:64 msgid "single arg format must be symmetric range" msgstr "单个参数格式必须是对称范围（即包含...）" -#: builtin/range-diff.c:75 +#: builtin/range-diff.c:79 msgid "need two commit ranges" msgstr "需要两个提交范围" @@ -16902,11 +17433,17 @@ msgstr "调试 unpack-trees" msgid "suppress feedback messages" msgstr "抑制反馈信息" +#: builtin/read-tree.c:188 +msgid "You need to resolve your current index first" +msgstr "您需要先解决当前索引的冲突" + #: builtin/rebase.c:32 msgid "" "git rebase [-i] [options] [--exec ] [--onto | --keep-base] " "[ []]" -msgstr "git rebase [-i] [options] [--exec <命令>] [--onto <新基线> | --keep-base] [<上游> [<分支>]]" +msgstr "" +"git rebase [-i] [options] [--exec <命令>] [--onto <新基线> | --keep-base] [<" +"上游> [<分支>]]" #: builtin/rebase.c:34 msgid "" @@ -16918,216 +17455,216 @@ msgstr "" msgid "git rebase --continue | --abort | --skip | --edit-todo" msgstr "git rebase --continue | --abort | --skip | --edit-todo" -#: builtin/rebase.c:158 builtin/rebase.c:182 builtin/rebase.c:209 +#: builtin/rebase.c:177 builtin/rebase.c:201 builtin/rebase.c:228 #, c-format msgid "unusable todo list: '%s'" msgstr "不可用的待办列表：'%s'" -#: builtin/rebase.c:167 builtin/rebase.c:193 builtin/rebase.c:217 +#: builtin/rebase.c:186 builtin/rebase.c:212 builtin/rebase.c:236 #, c-format msgid "could not write '%s'." msgstr "不能写入 '%s'。" -#: builtin/rebase.c:252 +#: builtin/rebase.c:271 msgid "no HEAD?" msgstr "没有 HEAD？" -#: builtin/rebase.c:279 +#: builtin/rebase.c:298 #, c-format msgid "could not create temporary %s" msgstr "无法创建临时的 %s" -#: builtin/rebase.c:285 +#: builtin/rebase.c:304 msgid "could not mark as interactive" msgstr "无法标记为交互式" -#: builtin/rebase.c:343 +#: builtin/rebase.c:362 msgid "could not generate todo list" msgstr "无法生成待办列表" -#: builtin/rebase.c:383 +#: builtin/rebase.c:402 msgid "a base commit must be provided with --upstream or --onto" msgstr "使用 --upstream 或 --onto 必须提供一个基线提交" -#: builtin/rebase.c:438 +#: builtin/rebase.c:457 msgid "git rebase--interactive []" msgstr "git rebase--interactive [<选项>]" -#: builtin/rebase.c:450 +#: builtin/rebase.c:469 msgid "keep empty commits" msgstr "保持空提交" -#: builtin/rebase.c:452 builtin/revert.c:128 +#: builtin/rebase.c:471 builtin/revert.c:128 msgid "allow commits with empty messages" msgstr "允许提交说明为空" -#: builtin/rebase.c:453 +#: builtin/rebase.c:472 msgid "rebase merge commits" msgstr "对合并提交变基" -#: builtin/rebase.c:455 +#: builtin/rebase.c:474 msgid "keep original branch points of cousins" msgstr "保持兄弟提交的原始分支点" -#: builtin/rebase.c:457 +#: builtin/rebase.c:476 msgid "move commits that begin with squash!/fixup!" msgstr "移动以 squash!/fixup! 开头的提交" -#: builtin/rebase.c:458 +#: builtin/rebase.c:477 msgid "sign commits" msgstr "签名提交" -#: builtin/rebase.c:460 builtin/rebase.c:1427 +#: builtin/rebase.c:479 builtin/rebase.c:1455 msgid "display a diffstat of what changed upstream" msgstr "显示上游变化的差异统计" -#: builtin/rebase.c:462 +#: builtin/rebase.c:481 msgid "continue rebase" msgstr "继续变基" -#: builtin/rebase.c:464 +#: builtin/rebase.c:483 msgid "skip commit" msgstr "跳过提交" -#: builtin/rebase.c:465 +#: builtin/rebase.c:484 msgid "edit the todo list" msgstr "变基待办列表" -#: builtin/rebase.c:467 +#: builtin/rebase.c:486 msgid "show the current patch" msgstr "显示当前补丁" -#: builtin/rebase.c:470 +#: builtin/rebase.c:489 msgid "shorten commit ids in the todo list" msgstr "缩短待办列表中的提交号" -#: builtin/rebase.c:472 +#: builtin/rebase.c:491 msgid "expand commit ids in the todo list" msgstr "扩展待办列表中的提交号" -#: builtin/rebase.c:474 +#: builtin/rebase.c:493 msgid "check the todo list" msgstr "检查待办列表" -#: builtin/rebase.c:476 +#: builtin/rebase.c:495 msgid "rearrange fixup/squash lines" msgstr "重新排列 fixup/squash 行" -#: builtin/rebase.c:478 +#: builtin/rebase.c:497 msgid "insert exec commands in todo list" msgstr "在待办列表中插入 exec 执行命令" -#: builtin/rebase.c:479 +#: builtin/rebase.c:498 msgid "onto" msgstr "onto" -#: builtin/rebase.c:482 +#: builtin/rebase.c:501 msgid "restrict-revision" msgstr "restrict-revision" -#: builtin/rebase.c:482 +#: builtin/rebase.c:501 msgid "restrict revision" msgstr "限制版本" -#: builtin/rebase.c:484 +#: builtin/rebase.c:503 msgid "squash-onto" msgstr "squash-onto" -#: builtin/rebase.c:485 +#: builtin/rebase.c:504 msgid "squash onto" msgstr "squash onto" -#: builtin/rebase.c:487 +#: builtin/rebase.c:506 msgid "the upstream commit" msgstr "上游提交" -#: builtin/rebase.c:489 +#: builtin/rebase.c:508 msgid "head-name" msgstr "head-name" -#: builtin/rebase.c:489 +#: builtin/rebase.c:508 msgid "head name" msgstr "head 名称" -#: builtin/rebase.c:494 +#: builtin/rebase.c:513 msgid "rebase strategy" msgstr "变基策略" -#: builtin/rebase.c:495 +#: builtin/rebase.c:514 msgid "strategy-opts" msgstr "strategy-opts" -#: builtin/rebase.c:496 +#: builtin/rebase.c:515 msgid "strategy options" msgstr "策略选项" -#: builtin/rebase.c:497 +#: builtin/rebase.c:516 msgid "switch-to" msgstr "切换到" -#: builtin/rebase.c:498 +#: builtin/rebase.c:517 msgid "the branch or commit to checkout" msgstr "要检出的分支或提交" -#: builtin/rebase.c:499 +#: builtin/rebase.c:518 msgid "onto-name" msgstr "onto-name" -#: builtin/rebase.c:499 +#: builtin/rebase.c:518 msgid "onto name" msgstr "onto name" -#: builtin/rebase.c:500 +#: builtin/rebase.c:519 msgid "cmd" msgstr "cmd" -#: builtin/rebase.c:500 +#: builtin/rebase.c:519 msgid "the command to run" msgstr "要执行的命令" -#: builtin/rebase.c:503 builtin/rebase.c:1510 +#: builtin/rebase.c:522 builtin/rebase.c:1540 msgid "automatically re-schedule any `exec` that fails" msgstr "自动重新安排任何失败的 `exec`" -#: builtin/rebase.c:519 +#: builtin/rebase.c:540 msgid "--[no-]rebase-cousins has no effect without --rebase-merges" msgstr "不使用 --rebase-merges，则 --[no-]rebase-cousins 没有效果" -#: builtin/rebase.c:535 +#: builtin/rebase.c:556 #, c-format msgid "%s requires an interactive rebase" msgstr "%s 需要交互式变基" -#: builtin/rebase.c:587 +#: builtin/rebase.c:608 #, c-format msgid "could not get 'onto': '%s'" msgstr "无法获取 'onto'：'%s'" -#: builtin/rebase.c:602 +#: builtin/rebase.c:623 #, c-format msgid "invalid orig-head: '%s'" msgstr "无效的原始 head：'%s'" -#: builtin/rebase.c:627 +#: builtin/rebase.c:648 #, c-format msgid "ignoring invalid allow_rerere_autoupdate: '%s'" msgstr "忽略无效的 allow_rerere_autoupdate：'%s'" -#: builtin/rebase.c:703 +#: builtin/rebase.c:724 #, c-format msgid "Could not read '%s'" msgstr "不能读取 '%s'" -#: builtin/rebase.c:721 +#: builtin/rebase.c:742 #, c-format msgid "Cannot store %s" msgstr "不能存储 %s" -#: builtin/rebase.c:828 +#: builtin/rebase.c:849 msgid "could not determine HEAD revision" msgstr "不能确定 HEAD 版本" -#: builtin/rebase.c:951 git-rebase--preserve-merges.sh:81 +#: builtin/rebase.c:972 git-rebase--preserve-merges.sh:81 msgid "" "Resolve all conflicts manually, mark them as resolved with\n" "\"git add/rm \", then run \"git rebase --continue\".\n" @@ -17140,7 +17677,7 @@ msgstr "" "\"git rebase --skip\" 命令跳过这个提交。如果想要终止执行并回到\n" "\"git rebase\" 执行之前的状态，执行 \"git rebase --abort\"。" -#: builtin/rebase.c:1032 +#: builtin/rebase.c:1060 #, c-format msgid "" "\n" @@ -17158,7 +17695,7 @@ msgstr "" "\n" "因此 git 无法对其变基。" -#: builtin/rebase.c:1339 +#: builtin/rebase.c:1367 #, c-format msgid "" "%s\n" @@ -17175,7 +17712,7 @@ msgstr "" " git rebase ''\n" "\n" -#: builtin/rebase.c:1355 +#: builtin/rebase.c:1383 #, c-format msgid "" "If you wish to set tracking information for this branch you can do so with:\n" @@ -17188,132 +17725,144 @@ msgstr "" " git branch --set-upstream-to=%s/ %s\n" "\n" -#: builtin/rebase.c:1385 +#: builtin/rebase.c:1413 msgid "exec commands cannot contain newlines" msgstr "exec 命令不能包含换行符" -#: builtin/rebase.c:1389 +#: builtin/rebase.c:1417 msgid "empty exec command" msgstr "空的 exec 命令" -#: builtin/rebase.c:1418 +#: builtin/rebase.c:1446 msgid "rebase onto given branch instead of upstream" msgstr "变基到给定的分支而非上游" -#: builtin/rebase.c:1420 +#: builtin/rebase.c:1448 msgid "use the merge-base of upstream and branch as the current base" msgstr "使用上游和分支的合并基线做为当前基线" -#: builtin/rebase.c:1422 +#: builtin/rebase.c:1450 msgid "allow pre-rebase hook to run" msgstr "允许执行 pre-rebase 钩子" -#: builtin/rebase.c:1424 +#: builtin/rebase.c:1452 msgid "be quiet. implies --no-stat" msgstr "安静。暗示 --no-stat" -#: builtin/rebase.c:1430 +#: builtin/rebase.c:1458 msgid "do not show diffstat of what changed upstream" msgstr "不显示上游变化的差异统计" -#: builtin/rebase.c:1433 +#: builtin/rebase.c:1461 msgid "add a Signed-off-by: line to each commit" msgstr "为每一个提交添加一个 Signed-off-by: 签名" -#: builtin/rebase.c:1435 builtin/rebase.c:1439 builtin/rebase.c:1441 -msgid "passed to 'git am'" -msgstr "传递给 'git am'" +#: builtin/rebase.c:1464 +msgid "make committer date match author date" +msgstr "让提交者日期匹配作者日期" + +#: builtin/rebase.c:1466 +msgid "ignore author date and use current date" +msgstr "忽略作者日期并使用当前日期" + +#: builtin/rebase.c:1468 +msgid "synonym of --reset-author-date" +msgstr "--reset-author-date 的同义词" -#: builtin/rebase.c:1443 builtin/rebase.c:1445 +#: builtin/rebase.c:1470 builtin/rebase.c:1474 msgid "passed to 'git apply'" msgstr "传递给 'git apply'" -#: builtin/rebase.c:1447 builtin/rebase.c:1450 +#: builtin/rebase.c:1472 +msgid "ignore changes in whitespace" +msgstr "忽略空白字符的变更" + +#: builtin/rebase.c:1476 builtin/rebase.c:1479 msgid "cherry-pick all commits, even if unchanged" msgstr "拣选所有提交，即使未修改" -#: builtin/rebase.c:1452 +#: builtin/rebase.c:1481 msgid "continue" msgstr "继续" -#: builtin/rebase.c:1455 +#: builtin/rebase.c:1484 msgid "skip current patch and continue" msgstr "跳过当前补丁并继续" # 译者：注意保持前导空格 -#: builtin/rebase.c:1457 +#: builtin/rebase.c:1486 msgid "abort and check out the original branch" msgstr "终止并检出原有分支" -#: builtin/rebase.c:1460 +#: builtin/rebase.c:1489 msgid "abort but keep HEAD where it is" msgstr "终止但保持 HEAD 不变" -#: builtin/rebase.c:1461 +#: builtin/rebase.c:1490 msgid "edit the todo list during an interactive rebase" msgstr "在交互式变基中编辑待办列表" -#: builtin/rebase.c:1464 +#: builtin/rebase.c:1493 msgid "show the patch file being applied or merged" msgstr "显示正在应用或合并的补丁文件" -#: builtin/rebase.c:1467 +#: builtin/rebase.c:1496 msgid "use merging strategies to rebase" msgstr "使用合并策略进行变基" -#: builtin/rebase.c:1471 +#: builtin/rebase.c:1500 msgid "let the user edit the list of commits to rebase" msgstr "让用户编辑要变基的提交列表" -#: builtin/rebase.c:1475 +#: builtin/rebase.c:1504 msgid "(DEPRECATED) try to recreate merges instead of ignoring them" msgstr "（已弃用）尝试重建合并提交而非忽略它们" -#: builtin/rebase.c:1479 +#: builtin/rebase.c:1509 msgid "preserve empty commits during rebase" msgstr "变基时保留空提交" -#: builtin/rebase.c:1481 +#: builtin/rebase.c:1511 msgid "move commits that begin with squash!/fixup! under -i" msgstr "在 -i 交互模式下，移动以 squash!/fixup! 开头的提交" -#: builtin/rebase.c:1487 +#: builtin/rebase.c:1517 msgid "automatically stash/stash pop before and after" msgstr "在操作前后执行自动贮藏和弹出贮藏" -#: builtin/rebase.c:1489 +#: builtin/rebase.c:1519 msgid "add exec lines after each commit of the editable list" msgstr "可编辑列表的每一个提交下面增加一行 exec" -#: builtin/rebase.c:1493 +#: builtin/rebase.c:1523 msgid "allow rebasing commits with empty messages" msgstr "允许针对空提交说明的提交变基" -#: builtin/rebase.c:1496 +#: builtin/rebase.c:1526 msgid "try to rebase merges instead of skipping them" msgstr "尝试对合并提交变基而不是忽略它们" -#: builtin/rebase.c:1499 +#: builtin/rebase.c:1529 msgid "use 'merge-base --fork-point' to refine upstream" msgstr "使用 'merge-base --fork-point' 来优化上游" -#: builtin/rebase.c:1501 +#: builtin/rebase.c:1531 msgid "use the given merge strategy" msgstr "使用给定的合并策略" -#: builtin/rebase.c:1503 builtin/revert.c:115 +#: builtin/rebase.c:1533 builtin/revert.c:115 msgid "option" msgstr "选项" -#: builtin/rebase.c:1504 +#: builtin/rebase.c:1534 msgid "pass the argument through to the merge strategy" msgstr "将参数传递给合并策略" -#: builtin/rebase.c:1507 +#: builtin/rebase.c:1537 msgid "rebase all reachable commits up to the root(s)" msgstr "将所有可达的提交变基到根提交" -#: builtin/rebase.c:1524 +#: builtin/rebase.c:1554 msgid "" "the rebase.useBuiltin support has been removed!\n" "See its entry in 'git help config' for details." @@ -17321,36 +17870,36 @@ msgstr "" "对 rebase.useBuiltin 的支持已被删除！\n" "详见 'git help config' 中的条目。" -#: builtin/rebase.c:1530 +#: builtin/rebase.c:1560 msgid "It looks like 'git am' is in progress. Cannot rebase." msgstr "看起来 'git-am' 正在执行中。无法变基。" -#: builtin/rebase.c:1571 +#: builtin/rebase.c:1601 msgid "" "git rebase --preserve-merges is deprecated. Use --rebase-merges instead." msgstr "git rebase --preserve-merges 被弃用。用 --rebase-merges 代替。" -#: builtin/rebase.c:1576 +#: builtin/rebase.c:1606 msgid "cannot combine '--keep-base' with '--onto'" msgstr "不能将 '--keep-base' 和 '--onto' 组合使用" -#: builtin/rebase.c:1578 +#: builtin/rebase.c:1608 msgid "cannot combine '--keep-base' with '--root'" msgstr "不能将 '--keep-base' 和 '--root' 组合使用" -#: builtin/rebase.c:1582 +#: builtin/rebase.c:1612 msgid "No rebase in progress?" msgstr "没有正在进行的变基？" -#: builtin/rebase.c:1586 +#: builtin/rebase.c:1616 msgid "The --edit-todo action can only be used during interactive rebase." msgstr "动作 --edit-todo 只能用在交互式变基过程中。" -#: builtin/rebase.c:1609 +#: builtin/rebase.c:1639 msgid "Cannot read HEAD" msgstr "不能读取 HEAD" -#: builtin/rebase.c:1621 +#: builtin/rebase.c:1651 msgid "" "You must edit all merge conflicts and then\n" "mark them as resolved using git add" @@ -17358,16 +17907,16 @@ msgstr "" "您必须编辑所有的合并冲突，然后通过 git add\n" "命令将它们标记为已解决" -#: builtin/rebase.c:1640 +#: builtin/rebase.c:1670 msgid "could not discard worktree changes" msgstr "无法丢弃工作区变更" -#: builtin/rebase.c:1659 +#: builtin/rebase.c:1689 #, c-format msgid "could not move back to %s" msgstr "无法移回 %s" -#: builtin/rebase.c:1704 +#: builtin/rebase.c:1734 #, c-format msgid "" "It seems that there is already a %s directory, and\n" @@ -17386,155 +17935,155 @@ msgstr "" "\t%s\n" "然后再重新执行。 为避免丢失重要数据，我已经停止当前操作。\n" -#: builtin/rebase.c:1725 +#: builtin/rebase.c:1757 msgid "switch `C' expects a numerical value" msgstr "开关 `C' 期望一个数字值" -#: builtin/rebase.c:1766 +#: builtin/rebase.c:1798 #, c-format msgid "Unknown mode: %s" msgstr "未知模式：%s" -#: builtin/rebase.c:1788 +#: builtin/rebase.c:1820 msgid "--strategy requires --merge or --interactive" msgstr "--strategy 需要 --merge 或 --interactive" -#: builtin/rebase.c:1828 +#: builtin/rebase.c:1860 msgid "--reschedule-failed-exec requires --exec or --interactive" msgstr "--reschedule-failed-exec 需要 --exec 或 --interactive" -#: builtin/rebase.c:1840 +#: builtin/rebase.c:1872 msgid "cannot combine am options with either interactive or merge options" msgstr "不能将 am 选项与交互或合并选项同时使用" -#: builtin/rebase.c:1859 +#: builtin/rebase.c:1891 msgid "cannot combine '--preserve-merges' with '--rebase-merges'" msgstr "不能将 '--preserve-merges' 和 '--rebase-merges' 同时使用" -#: builtin/rebase.c:1863 +#: builtin/rebase.c:1895 msgid "" "error: cannot combine '--preserve-merges' with '--reschedule-failed-exec'" msgstr "" "错误：不能将 '--preserve-merges' 和 '--reschedule-failed-exec' 同时使用" -#: builtin/rebase.c:1887 +#: builtin/rebase.c:1919 #, c-format msgid "invalid upstream '%s'" msgstr "无效的上游 '%s'" -#: builtin/rebase.c:1893 +#: builtin/rebase.c:1925 msgid "Could not create new root commit" msgstr "不能创建新的根提交" -#: builtin/rebase.c:1919 +#: builtin/rebase.c:1951 #, c-format msgid "'%s': need exactly one merge base with branch" msgstr "'%s'：只需要与分支的一个合并基线" -#: builtin/rebase.c:1922 +#: builtin/rebase.c:1954 #, c-format msgid "'%s': need exactly one merge base" msgstr "'%s'：只需要一个合并基线" -#: builtin/rebase.c:1930 +#: builtin/rebase.c:1962 #, c-format msgid "Does not point to a valid commit '%s'" msgstr "没有指向一个有效的提交 '%s'" -#: builtin/rebase.c:1955 +#: builtin/rebase.c:1987 #, c-format msgid "fatal: no such branch/commit '%s'" msgstr "致命错误：无此分支/提交 '%s'" -#: builtin/rebase.c:1963 builtin/submodule--helper.c:38 -#: builtin/submodule--helper.c:1934 +#: builtin/rebase.c:1995 builtin/submodule--helper.c:40 +#: builtin/submodule--helper.c:1961 #, c-format msgid "No such ref: %s" msgstr "没有这样的引用：%s" -#: builtin/rebase.c:1974 +#: builtin/rebase.c:2006 msgid "Could not resolve HEAD to a revision" msgstr "无法将 HEAD 解析为一个版本" -#: builtin/rebase.c:2012 +#: builtin/rebase.c:2044 msgid "Cannot autostash" msgstr "无法 autostash" -#: builtin/rebase.c:2015 +#: builtin/rebase.c:2047 #, c-format msgid "Unexpected stash response: '%s'" msgstr "意外的 stash 响应：'%s'" -#: builtin/rebase.c:2021 +#: builtin/rebase.c:2053 #, c-format msgid "Could not create directory for '%s'" msgstr "不能为 '%s' 创建目录" -#: builtin/rebase.c:2024 +#: builtin/rebase.c:2056 #, c-format msgid "Created autostash: %s\n" msgstr "创建了 autostash：%s\n" -#: builtin/rebase.c:2027 +#: builtin/rebase.c:2059 msgid "could not reset --hard" msgstr "无法 reset --hard" -#: builtin/rebase.c:2036 +#: builtin/rebase.c:2068 msgid "Please commit or stash them." msgstr "请提交或贮藏修改。" -#: builtin/rebase.c:2063 +#: builtin/rebase.c:2095 #, c-format msgid "could not parse '%s'" msgstr "无法解析 '%s'" -#: builtin/rebase.c:2076 +#: builtin/rebase.c:2108 #, c-format msgid "could not switch to %s" msgstr "无法切换到 %s" -#: builtin/rebase.c:2087 +#: builtin/rebase.c:2119 msgid "HEAD is up to date." msgstr "HEAD 是最新的。" -#: builtin/rebase.c:2089 +#: builtin/rebase.c:2121 #, c-format msgid "Current branch %s is up to date.\n" msgstr "当前分支 %s 是最新的。\n" -#: builtin/rebase.c:2097 +#: builtin/rebase.c:2129 msgid "HEAD is up to date, rebase forced." msgstr "HEAD 是最新的，强制变基。" -#: builtin/rebase.c:2099 +#: builtin/rebase.c:2131 #, c-format msgid "Current branch %s is up to date, rebase forced.\n" msgstr "当前分支 %s 是最新的，强制变基。\n" -#: builtin/rebase.c:2107 +#: builtin/rebase.c:2139 msgid "The pre-rebase hook refused to rebase." msgstr "pre-rebase 钩子拒绝了变基操作。" -#: builtin/rebase.c:2114 +#: builtin/rebase.c:2146 #, c-format msgid "Changes to %s:\n" msgstr "到 %s 的变更：\n" -#: builtin/rebase.c:2117 +#: builtin/rebase.c:2149 #, c-format msgid "Changes from %s to %s:\n" msgstr "从 %s 到 %s 的变更：\n" -#: builtin/rebase.c:2142 +#: builtin/rebase.c:2174 #, c-format msgid "First, rewinding head to replay your work on top of it...\n" msgstr "首先，回退头指针以便在其上重放您的工作...\n" -#: builtin/rebase.c:2151 +#: builtin/rebase.c:2183 msgid "Could not detach HEAD" msgstr "无法分离头指针" -#: builtin/rebase.c:2160 +#: builtin/rebase.c:2192 #, c-format msgid "Fast-forwarded %s to %s.\n" msgstr "快进 %s 到 %s。\n" @@ -17815,7 +18364,7 @@ msgstr "（匹配）" msgid "(delete)" msgstr "（删除）" -#: builtin/remote.c:629 builtin/remote.c:765 builtin/remote.c:864 +#: builtin/remote.c:629 builtin/remote.c:764 builtin/remote.c:863 #, c-format msgid "No such remote: '%s'" msgstr "没有此远程仓库：'%s'" @@ -17836,17 +18385,17 @@ msgstr "" "\t%s\n" "\t如果必要请手动更新配置。" -#: builtin/remote.c:702 +#: builtin/remote.c:701 #, c-format msgid "deleting '%s' failed" msgstr "删除 '%s' 失败" -#: builtin/remote.c:736 +#: builtin/remote.c:735 #, c-format msgid "creating '%s' failed" msgstr "创建 '%s' 失败" -#: builtin/remote.c:802 +#: builtin/remote.c:801 msgid "" "Note: A branch outside the refs/remotes/ hierarchy was not removed;\n" "to delete it, use:" @@ -17856,118 +18405,118 @@ msgid_plural "" msgstr[0] "注意：ref/remotes 层级之外的一个分支未被移除。要删除它，使用：" msgstr[1] "注意：ref/remotes 层级之外的一些分支未被移除。要删除它们，使用：" -#: builtin/remote.c:816 +#: builtin/remote.c:815 #, c-format msgid "Could not remove config section '%s'" msgstr "不能移除配置小节 '%s'" -#: builtin/remote.c:917 +#: builtin/remote.c:916 #, c-format msgid " new (next fetch will store in remotes/%s)" msgstr " 新的（下一次获取将存储于 remotes/%s）" -#: builtin/remote.c:920 +#: builtin/remote.c:919 msgid " tracked" msgstr " 已跟踪" -#: builtin/remote.c:922 +#: builtin/remote.c:921 msgid " stale (use 'git remote prune' to remove)" msgstr " 过时（使用 'git remote prune' 来移除）" -#: builtin/remote.c:924 +#: builtin/remote.c:923 msgid " ???" msgstr " ???" -#: builtin/remote.c:965 +#: builtin/remote.c:964 #, c-format msgid "invalid branch.%s.merge; cannot rebase onto > 1 branch" msgstr "无效的 branch.%s.merge，不能变基到一个以上的分支" -#: builtin/remote.c:974 +#: builtin/remote.c:973 #, c-format msgid "rebases interactively onto remote %s" msgstr "交互式变基到远程 %s" -#: builtin/remote.c:976 +#: builtin/remote.c:975 #, c-format msgid "rebases interactively (with merges) onto remote %s" msgstr "交互式变基（含合并提交）到远程 %s" -#: builtin/remote.c:979 +#: builtin/remote.c:978 #, c-format msgid "rebases onto remote %s" msgstr "变基到远程 %s" -#: builtin/remote.c:983 +#: builtin/remote.c:982 #, c-format msgid " merges with remote %s" msgstr " 与远程 %s 合并" -#: builtin/remote.c:986 +#: builtin/remote.c:985 #, c-format msgid "merges with remote %s" msgstr "与远程 %s 合并" -#: builtin/remote.c:989 +#: builtin/remote.c:988 #, c-format msgid "%-*s and with remote %s\n" msgstr "%-*s 以及和远程 %s\n" -#: builtin/remote.c:1032 +#: builtin/remote.c:1031 msgid "create" msgstr "创建" -#: builtin/remote.c:1035 +#: builtin/remote.c:1034 msgid "delete" msgstr "删除" -#: builtin/remote.c:1039 +#: builtin/remote.c:1038 msgid "up to date" msgstr "最新" -#: builtin/remote.c:1042 +#: builtin/remote.c:1041 msgid "fast-forwardable" msgstr "可快进" -#: builtin/remote.c:1045 +#: builtin/remote.c:1044 msgid "local out of date" msgstr "本地已过时" -#: builtin/remote.c:1052 +#: builtin/remote.c:1051 #, c-format msgid " %-*s forces to %-*s (%s)" msgstr " %-*s 强制推送至 %-*s (%s)" -#: builtin/remote.c:1055 +#: builtin/remote.c:1054 #, c-format msgid " %-*s pushes to %-*s (%s)" msgstr " %-*s 推送至 %-*s (%s)" -#: builtin/remote.c:1059 +#: builtin/remote.c:1058 #, c-format msgid " %-*s forces to %s" msgstr " %-*s 强制推送至 %s" -#: builtin/remote.c:1062 +#: builtin/remote.c:1061 #, c-format msgid " %-*s pushes to %s" msgstr " %-*s 推送至 %s" -#: builtin/remote.c:1130 +#: builtin/remote.c:1129 msgid "do not query remotes" msgstr "不查询远程" -#: builtin/remote.c:1157 +#: builtin/remote.c:1156 #, c-format msgid "* remote %s" msgstr "* 远程 %s" -#: builtin/remote.c:1158 +#: builtin/remote.c:1157 #, c-format msgid " Fetch URL: %s" msgstr " 获取地址：%s" -#: builtin/remote.c:1159 builtin/remote.c:1175 builtin/remote.c:1314 +#: builtin/remote.c:1158 builtin/remote.c:1174 builtin/remote.c:1313 msgid "(no URL)" msgstr "(无 URL)" @@ -17975,32 +18524,32 @@ msgstr "(无 URL)" #. with the one in " Fetch URL: %s" #. translation. #. -#: builtin/remote.c:1173 builtin/remote.c:1175 +#: builtin/remote.c:1172 builtin/remote.c:1174 #, c-format msgid " Push URL: %s" msgstr " 推送地址：%s" -#: builtin/remote.c:1177 builtin/remote.c:1179 builtin/remote.c:1181 +#: builtin/remote.c:1176 builtin/remote.c:1178 builtin/remote.c:1180 #, c-format msgid " HEAD branch: %s" msgstr " HEAD 分支：%s" # 译者：中文字符串拼接，可删除前导空格 -#: builtin/remote.c:1177 +#: builtin/remote.c:1176 msgid "(not queried)" msgstr "（未查询）" -#: builtin/remote.c:1179 +#: builtin/remote.c:1178 msgid "(unknown)" msgstr "（未知）" -#: builtin/remote.c:1183 +#: builtin/remote.c:1182 #, c-format msgid "" " HEAD branch (remote HEAD is ambiguous, may be one of the following):\n" msgstr " HEAD 分支（远程 HEAD 模糊，可能是下列中的一个）：\n" -#: builtin/remote.c:1195 +#: builtin/remote.c:1194 #, c-format msgid " Remote branch:%s" msgid_plural " Remote branches:%s" @@ -18008,159 +18557,150 @@ msgstr[0] " 远程分支：%s" msgstr[1] " 远程分支：%s" # 译者：中文字符串拼接，可删除前导空格 -#: builtin/remote.c:1198 builtin/remote.c:1224 +#: builtin/remote.c:1197 builtin/remote.c:1223 msgid " (status not queried)" msgstr "（状态未查询）" -#: builtin/remote.c:1207 +#: builtin/remote.c:1206 msgid " Local branch configured for 'git pull':" msgid_plural " Local branches configured for 'git pull':" msgstr[0] " 为 'git pull' 配置的本地分支：" msgstr[1] " 为 'git pull' 配置的本地分支：" -#: builtin/remote.c:1215 +#: builtin/remote.c:1214 msgid " Local refs will be mirrored by 'git push'" msgstr " 本地引用将在 'git push' 时被镜像" -#: builtin/remote.c:1221 +#: builtin/remote.c:1220 #, c-format msgid " Local ref configured for 'git push'%s:" msgid_plural " Local refs configured for 'git push'%s:" msgstr[0] " 为 'git push' 配置的本地引用%s：" msgstr[1] " 为 'git push' 配置的本地引用%s：" -#: builtin/remote.c:1242 +#: builtin/remote.c:1241 msgid "set refs/remotes//HEAD according to remote" msgstr "根据远程设置 refs/remotes/<名称>/HEAD" -#: builtin/remote.c:1244 +#: builtin/remote.c:1243 msgid "delete refs/remotes//HEAD" msgstr "删除 refs/remotes/<名称>/HEAD" -#: builtin/remote.c:1259 +#: builtin/remote.c:1258 msgid "Cannot determine remote HEAD" msgstr "无法确定远程 HEAD" -#: builtin/remote.c:1261 +#: builtin/remote.c:1260 msgid "Multiple remote HEAD branches. Please choose one explicitly with:" msgstr "多个远程 HEAD 分支。请明确地选择一个用命令：" -#: builtin/remote.c:1271 +#: builtin/remote.c:1270 #, c-format msgid "Could not delete %s" msgstr "无法删除 %s" -#: builtin/remote.c:1279 +#: builtin/remote.c:1278 #, c-format msgid "Not a valid ref: %s" msgstr "不是一个有效引用：%s" -#: builtin/remote.c:1281 +#: builtin/remote.c:1280 #, c-format msgid "Could not setup %s" msgstr "不能设置 %s" # 译者：注意保持前导空格 -#: builtin/remote.c:1299 +#: builtin/remote.c:1298 #, c-format msgid " %s will become dangling!" msgstr " %s 将成为悬空状态！" # 译者：注意保持前导空格 -#: builtin/remote.c:1300 +#: builtin/remote.c:1299 #, c-format msgid " %s has become dangling!" msgstr " %s 已成为悬空状态！" -#: builtin/remote.c:1310 +#: builtin/remote.c:1309 #, c-format msgid "Pruning %s" msgstr "修剪 %s" -#: builtin/remote.c:1311 +#: builtin/remote.c:1310 #, c-format msgid "URL: %s" msgstr "URL：%s" -#: builtin/remote.c:1327 +#: builtin/remote.c:1326 #, c-format msgid " * [would prune] %s" msgstr " * [将删除] %s" -#: builtin/remote.c:1330 +#: builtin/remote.c:1329 #, c-format msgid " * [pruned] %s" msgstr " * [已删除] %s" -#: builtin/remote.c:1375 +#: builtin/remote.c:1374 msgid "prune remotes after fetching" msgstr "抓取后清除远程" -#: builtin/remote.c:1438 builtin/remote.c:1492 builtin/remote.c:1560 +#: builtin/remote.c:1437 builtin/remote.c:1491 builtin/remote.c:1559 #, c-format msgid "No such remote '%s'" msgstr "没有此远程 '%s'" -#: builtin/remote.c:1454 +#: builtin/remote.c:1453 msgid "add branch" msgstr "添加分支" -#: builtin/remote.c:1461 +#: builtin/remote.c:1460 msgid "no remote specified" msgstr "未指定远程" -#: builtin/remote.c:1478 +#: builtin/remote.c:1477 msgid "query push URLs rather than fetch URLs" msgstr "查询推送 URL 地址，而非获取 URL 地址" -#: builtin/remote.c:1480 +#: builtin/remote.c:1479 msgid "return all URLs" msgstr "返回所有 URL 地址" -#: builtin/remote.c:1508 +#: builtin/remote.c:1507 #, c-format msgid "no URLs configured for remote '%s'" msgstr "没有给远程仓库 '%s' 设定 URL" -#: builtin/remote.c:1534 +#: builtin/remote.c:1533 msgid "manipulate push URLs" msgstr "操作推送 URLS" -#: builtin/remote.c:1536 +#: builtin/remote.c:1535 msgid "add URL" msgstr "添加 URL" -#: builtin/remote.c:1538 +#: builtin/remote.c:1537 msgid "delete URLs" msgstr "删除 URLS" -#: builtin/remote.c:1545 +#: builtin/remote.c:1544 msgid "--add --delete doesn't make sense" msgstr "--add --delete 无意义" -#: builtin/remote.c:1584 +#: builtin/remote.c:1583 #, c-format msgid "Invalid old URL pattern: %s" msgstr "无效的旧 URL 匹配模版：%s" -#: builtin/remote.c:1592 +#: builtin/remote.c:1591 #, c-format msgid "No such URL found: %s" msgstr "未找到此 URL：%s" -#: builtin/remote.c:1594 +#: builtin/remote.c:1593 msgid "Will not delete all non-push URLs" msgstr "将不会删除所有非推送 URL 地址" -#: builtin/remote.c:1610 -msgid "be verbose; must be placed before a subcommand" -msgstr "冗长输出；必须置于子命令之前" - -#: builtin/remote.c:1641 -#, c-format -msgid "Unknown subcommand: %s" -msgstr "未知子命令：%s" - #: builtin/repack.c:23 msgid "git repack []" msgstr "git repack [<选项>]" @@ -18177,107 +18717,107 @@ msgstr "" msgid "could not start pack-objects to repack promisor objects" msgstr "无法开始 pack-objects 来重新打包 promisor 对象" -#: builtin/repack.c:230 builtin/repack.c:409 +#: builtin/repack.c:230 builtin/repack.c:416 msgid "repack: Expecting full hex object ID lines only from pack-objects." msgstr "repack：期望来自 pack-objects 的完整十六进制对象 ID。" -#: builtin/repack.c:247 +#: builtin/repack.c:254 msgid "could not finish pack-objects to repack promisor objects" msgstr "无法完成 pack-objects 来重新打包 promisor 对象" -#: builtin/repack.c:285 +#: builtin/repack.c:292 msgid "pack everything in a single pack" msgstr "所有内容打包到一个包文件中" -#: builtin/repack.c:287 +#: builtin/repack.c:294 msgid "same as -a, and turn unreachable objects loose" msgstr "和 -a 相同，并将不可达的对象设为松散对象" -#: builtin/repack.c:290 +#: builtin/repack.c:297 msgid "remove redundant packs, and run git-prune-packed" msgstr "删除多余的包，运行 git-prune-packed" -#: builtin/repack.c:292 +#: builtin/repack.c:299 msgid "pass --no-reuse-delta to git-pack-objects" msgstr "向 git-pack-objects 传递参数 --no-reuse-delta" -#: builtin/repack.c:294 +#: builtin/repack.c:301 msgid "pass --no-reuse-object to git-pack-objects" msgstr "向 git-pack-objects 传递参数 --no-reuse-object" -#: builtin/repack.c:296 +#: builtin/repack.c:303 msgid "do not run git-update-server-info" msgstr "不运行 git-update-server-info" -#: builtin/repack.c:299 +#: builtin/repack.c:306 msgid "pass --local to git-pack-objects" msgstr "向 git-pack-objects 传递参数 --local" -#: builtin/repack.c:301 +#: builtin/repack.c:308 msgid "write bitmap index" msgstr "写 bitmap 索引" -#: builtin/repack.c:303 +#: builtin/repack.c:310 msgid "pass --delta-islands to git-pack-objects" msgstr "向 git-pack-objects 传递参数 --delta-islands" -#: builtin/repack.c:304 +#: builtin/repack.c:311 msgid "approxidate" msgstr "近似日期" -#: builtin/repack.c:305 +#: builtin/repack.c:312 msgid "with -A, do not loosen objects older than this" msgstr "使用 -A，不要将早于给定时间的对象过期" -#: builtin/repack.c:307 +#: builtin/repack.c:314 msgid "with -a, repack unreachable objects" msgstr "使用 -a ，重新对不可达对象打包" -#: builtin/repack.c:309 +#: builtin/repack.c:316 msgid "size of the window used for delta compression" msgstr "用于增量压缩的窗口值" -#: builtin/repack.c:310 builtin/repack.c:316 +#: builtin/repack.c:317 builtin/repack.c:323 msgid "bytes" msgstr "字节" -#: builtin/repack.c:311 +#: builtin/repack.c:318 msgid "same as the above, but limit memory size instead of entries count" msgstr "和上面的相似，但限制内存大小而非条目数" -#: builtin/repack.c:313 +#: builtin/repack.c:320 msgid "limits the maximum delta depth" msgstr "限制最大增量深度" -#: builtin/repack.c:315 +#: builtin/repack.c:322 msgid "limits the maximum number of threads" msgstr "限制最大线程数" -#: builtin/repack.c:317 +#: builtin/repack.c:324 msgid "maximum size of each packfile" msgstr "每个包文件的最大尺寸" -#: builtin/repack.c:319 +#: builtin/repack.c:326 msgid "repack objects in packs marked with .keep" msgstr "对标记为 .keep 的包中的对象重新打包" -#: builtin/repack.c:321 +#: builtin/repack.c:328 msgid "do not repack this pack" msgstr "不要对该包文件重新打包" -#: builtin/repack.c:331 +#: builtin/repack.c:338 msgid "cannot delete packs in a precious-objects repo" msgstr "不能删除珍品仓库中的打包文件" -#: builtin/repack.c:335 +#: builtin/repack.c:342 msgid "--keep-unreachable and -A are incompatible" msgstr "--keep-unreachable 和 -A 不兼容" -#: builtin/repack.c:418 +#: builtin/repack.c:425 msgid "Nothing new to pack." msgstr "没有新的要打包。" -#: builtin/repack.c:479 +#: builtin/repack.c:486 #, c-format msgid "" "WARNING: Some packs in use have been renamed by\n" @@ -18293,7 +18833,7 @@ msgstr "" "警告：并且尝试重命名改回原有文件名的操作也失败。\n" "警告：请手动将 %s 下的这些文件重命名：\n" -#: builtin/repack.c:527 +#: builtin/repack.c:534 #, c-format msgid "failed to remove '%s'" msgstr "删除 '%s' 失败" @@ -18567,121 +19107,127 @@ msgid "" msgstr "git reset [--mixed | --soft | --hard | --merge | --keep] [-q] [<提交>]" #: builtin/reset.c:33 -msgid "git reset [-q] [] [--] ..." -msgstr "git reset [-q] [<树或提交>] [--] <路径>..." +msgid "git reset [-q] [] [--] ..." +msgstr "git reset [-q] [<树对象>] [--] <路径表达式>..." #: builtin/reset.c:34 -msgid "git reset --patch [] [--] [...]" -msgstr "git reset --patch [<树或提交>] [--] [<路径>...]" +msgid "" +"git reset [-q] [--pathspec-from-file [--pathspec-file-nul]] []" +msgstr "" +"git reset [-q] [--pathspec-from-file [--pathspec-file-nul]] [<树对象>]" -#: builtin/reset.c:40 +#: builtin/reset.c:35 +msgid "git reset --patch [] [--] [...]" +msgstr "git reset --patch [<树对象>] [--] [<路径表达式>...]" + +#: builtin/reset.c:41 msgid "mixed" msgstr "混杂" -#: builtin/reset.c:40 +#: builtin/reset.c:41 msgid "soft" msgstr "软性" -#: builtin/reset.c:40 +#: builtin/reset.c:41 msgid "hard" msgstr "硬性" -#: builtin/reset.c:40 +#: builtin/reset.c:41 msgid "merge" msgstr "合并" -#: builtin/reset.c:40 +#: builtin/reset.c:41 msgid "keep" msgstr "保持" -#: builtin/reset.c:81 +#: builtin/reset.c:82 msgid "You do not have a valid HEAD." msgstr "您没有一个有效的 HEAD。" -#: builtin/reset.c:83 +#: builtin/reset.c:84 msgid "Failed to find tree of HEAD." msgstr "无法找到 HEAD 指向的树。" -#: builtin/reset.c:89 +#: builtin/reset.c:90 #, c-format msgid "Failed to find tree of %s." msgstr "无法找到 %s 指向的树。" -#: builtin/reset.c:114 +#: builtin/reset.c:115 #, c-format msgid "HEAD is now at %s" msgstr "HEAD 现在位于 %s" # 译者：汉字之间无空格，故删除%s前后空格 -#: builtin/reset.c:193 +#: builtin/reset.c:194 #, c-format msgid "Cannot do a %s reset in the middle of a merge." msgstr "在合并过程中不能做%s重置操作。" -#: builtin/reset.c:293 builtin/stash.c:520 builtin/stash.c:595 -#: builtin/stash.c:619 +#: builtin/reset.c:294 builtin/stash.c:519 builtin/stash.c:594 +#: builtin/stash.c:618 msgid "be quiet, only report errors" msgstr "安静模式，只报告错误" -#: builtin/reset.c:295 +#: builtin/reset.c:296 msgid "reset HEAD and index" msgstr "重置 HEAD 和索引" -#: builtin/reset.c:296 +#: builtin/reset.c:297 msgid "reset only HEAD" msgstr "只重置 HEAD" -#: builtin/reset.c:298 builtin/reset.c:300 +#: builtin/reset.c:299 builtin/reset.c:301 msgid "reset HEAD, index and working tree" msgstr "重置 HEAD、索引和工作区" -#: builtin/reset.c:302 +#: builtin/reset.c:303 msgid "reset HEAD but keep local changes" msgstr "重置 HEAD 但保存本地变更" -#: builtin/reset.c:308 +#: builtin/reset.c:309 msgid "record only the fact that removed paths will be added later" msgstr "将删除的路径标记为稍后添加" -#: builtin/reset.c:326 +#: builtin/reset.c:343 #, c-format msgid "Failed to resolve '%s' as a valid revision." msgstr "无法将 '%s' 解析为一个有效的版本。" -#: builtin/reset.c:334 +#: builtin/reset.c:351 #, c-format msgid "Failed to resolve '%s' as a valid tree." msgstr "无法将 '%s' 解析为一个有效的树对象。" -#: builtin/reset.c:343 +#: builtin/reset.c:360 msgid "--patch is incompatible with --{hard,mixed,soft}" msgstr "--patch 与 --{hard、mixed、soft} 选项不兼容" -#: builtin/reset.c:353 +#: builtin/reset.c:370 msgid "--mixed with paths is deprecated; use 'git reset -- ' instead." msgstr "--mixed 带路径已弃用，而是用 'git reset -- <路径>'。" # 译者：汉字之间无空格，故删除%s前后空格 -#: builtin/reset.c:355 +#: builtin/reset.c:372 #, c-format msgid "Cannot do %s reset with paths." msgstr "不能带路径进行%s重置。" # 译者：汉字之间无空格，故删除%s前后空格 -#: builtin/reset.c:370 +#: builtin/reset.c:387 #, c-format msgid "%s reset is not allowed in a bare repository" msgstr "不能对纯仓库进行%s重置" -#: builtin/reset.c:374 +#: builtin/reset.c:391 msgid "-N can only be used with --mixed" msgstr "-N 只能和 --mixed 同时使用" -#: builtin/reset.c:395 +#: builtin/reset.c:412 msgid "Unstaged changes after reset:" msgstr "重置后取消暂存的变更：" -#: builtin/reset.c:398 +#: builtin/reset.c:415 #, c-format msgid "" "\n" @@ -18693,12 +19239,12 @@ msgstr "" "重置后，枚举未暂存变更花费了 %.2f 秒。 您可以使用 '--quiet' 避免此情况。\n" "将配置变量 reset.quiet 设置为 true 可使其成为默认值。\n" -#: builtin/reset.c:408 +#: builtin/reset.c:425 #, c-format msgid "Could not reset index file to revision '%s'." msgstr "不能重置索引文件至版本 '%s'。" -#: builtin/reset.c:412 +#: builtin/reset.c:429 msgid "Could not write new index file." msgstr "不能写入新的索引文件。" @@ -19151,6 +19697,55 @@ msgstr "不打印结果到标准输出（例如与 --verify 参数共用）" msgid "show refs from stdin that aren't in local repository" msgstr "显示从标准输入中读入的不在本地仓库中的引用" +#: builtin/sparse-checkout.c:20 +msgid "git sparse-checkout (init|list|set|disable) " +msgstr "git sparse-checkout (init|list|set|disable) <选项>" + +#: builtin/sparse-checkout.c:61 +msgid "this worktree is not sparse (sparse-checkout file may not exist)" +msgstr "本工作区不是稀疏模式（稀疏检出文件可能不存在）" + +#: builtin/sparse-checkout.c:220 +msgid "failed to set extensions.worktreeConfig setting" +msgstr "无法设置 extensions.worktreeConfig" + +#: builtin/sparse-checkout.c:237 +msgid "git sparse-checkout init [--cone]" +msgstr "git sparse-checkout init [--cone]" + +#: builtin/sparse-checkout.c:256 +msgid "initialize the sparse-checkout in cone mode" +msgstr "初始化稀疏检出为 cone 模式" + +#: builtin/sparse-checkout.c:262 +msgid "initialize sparse-checkout" +msgstr "初始化稀疏检出" + +#: builtin/sparse-checkout.c:295 +#, c-format +msgid "failed to open '%s'" +msgstr "无法打开 '%s'" + +#: builtin/sparse-checkout.c:361 +msgid "git sparse-checkout set (--stdin | )" +msgstr "git sparse-checkout set (--stdin | <模式>)" + +#: builtin/sparse-checkout.c:378 +msgid "read patterns from standard in" +msgstr "从标准输入读取模式" + +#: builtin/sparse-checkout.c:384 +msgid "set sparse-checkout patterns" +msgstr "设置稀疏检出模式" + +#: builtin/sparse-checkout.c:447 +msgid "disable sparse-checkout" +msgstr "禁用稀疏检出" + +#: builtin/sparse-checkout.c:459 +msgid "error while refreshing working directory" +msgstr "刷新工作目录时出错" + #: builtin/stash.c:22 builtin/stash.c:37 msgid "git stash list []" msgstr "git stash list [<选项>]" @@ -19215,7 +19810,7 @@ msgstr "'%s' 不像是一个贮藏提交" msgid "Too many revisions specified:%s" msgstr "指定了太多的版本：%s" -#: builtin/stash.c:161 git-legacy-stash.sh:548 +#: builtin/stash.c:161 git-legacy-stash.sh:549 msgid "No stash entries found." msgstr "未发现贮藏条目。" @@ -19254,51 +19849,51 @@ msgstr "无法从贮藏条目中恢复未跟踪文件" msgid "Merging %s with %s" msgstr "正在合并 %s 和 %s" -#: builtin/stash.c:460 git-legacy-stash.sh:680 +#: builtin/stash.c:460 git-legacy-stash.sh:681 msgid "Index was not unstashed." msgstr "索引未从贮藏中恢复。" -#: builtin/stash.c:522 builtin/stash.c:621 +#: builtin/stash.c:521 builtin/stash.c:620 msgid "attempt to recreate the index" msgstr "尝试重建索引" -#: builtin/stash.c:555 +#: builtin/stash.c:554 #, c-format msgid "Dropped %s (%s)" msgstr "丢弃了 %s（%s）" -#: builtin/stash.c:558 +#: builtin/stash.c:557 #, c-format msgid "%s: Could not drop stash entry" msgstr "%s：无法丢弃贮藏条目" -#: builtin/stash.c:583 +#: builtin/stash.c:582 #, c-format msgid "'%s' is not a stash reference" msgstr "'%s' 不是一个贮藏引用" -#: builtin/stash.c:633 git-legacy-stash.sh:694 +#: builtin/stash.c:632 git-legacy-stash.sh:695 msgid "The stash entry is kept in case you need it again." msgstr "贮藏条目被保留以备您再次需要。" -#: builtin/stash.c:656 git-legacy-stash.sh:712 +#: builtin/stash.c:655 git-legacy-stash.sh:713 msgid "No branch name specified" msgstr "未指定分支名" -#: builtin/stash.c:796 builtin/stash.c:833 +#: builtin/stash.c:795 builtin/stash.c:832 #, c-format msgid "Cannot update %s with %s" msgstr "无法用 %2$s 更新 %1$s" -#: builtin/stash.c:814 builtin/stash.c:1470 builtin/stash.c:1506 +#: builtin/stash.c:813 builtin/stash.c:1470 builtin/stash.c:1506 msgid "stash message" msgstr "贮藏说明" -#: builtin/stash.c:824 +#: builtin/stash.c:823 msgid "\"git stash store\" requires one argument" msgstr "\"git stash store\" 需要一个 <提交> 参数" -#: builtin/stash.c:1046 git-legacy-stash.sh:217 +#: builtin/stash.c:1045 git-legacy-stash.sh:218 msgid "No changes selected" msgstr "没有选择变更" @@ -19314,16 +19909,16 @@ msgstr "无法保存当前索引状态" msgid "Cannot save the untracked files" msgstr "无法保存未跟踪文件" -#: builtin/stash.c:1192 builtin/stash.c:1201 git-legacy-stash.sh:200 -#: git-legacy-stash.sh:213 +#: builtin/stash.c:1192 builtin/stash.c:1201 git-legacy-stash.sh:201 +#: git-legacy-stash.sh:214 msgid "Cannot save the current worktree state" msgstr "无法保存当前工作区状态" -#: builtin/stash.c:1229 git-legacy-stash.sh:233 +#: builtin/stash.c:1229 git-legacy-stash.sh:234 msgid "Cannot record working tree state" msgstr "不能记录工作区状态" -#: builtin/stash.c:1278 git-legacy-stash.sh:337 +#: builtin/stash.c:1278 git-legacy-stash.sh:338 msgid "Can't use --patch and --include-untracked or --all at the same time" msgstr "不能同时使用参数 --patch 和 --include-untracked 或 --all" @@ -19331,15 +19926,15 @@ msgstr "不能同时使用参数 --patch 和 --include-untracked 或 --all" msgid "Did you forget to 'git add'?" msgstr "您是否忘了执行 'git add'？" -#: builtin/stash.c:1309 git-legacy-stash.sh:345 +#: builtin/stash.c:1309 git-legacy-stash.sh:346 msgid "No local changes to save" msgstr "没有要保存的本地修改" -#: builtin/stash.c:1316 git-legacy-stash.sh:350 +#: builtin/stash.c:1316 git-legacy-stash.sh:351 msgid "Cannot initialize stash" msgstr "无法初始化贮藏" -#: builtin/stash.c:1331 git-legacy-stash.sh:354 +#: builtin/stash.c:1331 git-legacy-stash.sh:355 msgid "Cannot save the current status" msgstr "无法保存当前状态" @@ -19348,7 +19943,7 @@ msgstr "无法保存当前状态" msgid "Saved working directory and index state %s" msgstr "保存工作目录和索引状态 %s" -#: builtin/stash.c:1426 git-legacy-stash.sh:384 +#: builtin/stash.c:1426 git-legacy-stash.sh:385 msgid "Cannot remove worktree changes" msgstr "无法删除工作区变更" @@ -19393,40 +19988,40 @@ msgstr "跳过和移除所有的注释行" msgid "prepend comment character and space to each line" msgstr "为每一行的行首添加注释符和空格" -#: builtin/submodule--helper.c:45 builtin/submodule--helper.c:1943 +#: builtin/submodule--helper.c:47 builtin/submodule--helper.c:1970 #, c-format msgid "Expecting a full ref name, got %s" msgstr "期望一个完整的引用名称，却得到 %s" -#: builtin/submodule--helper.c:62 +#: builtin/submodule--helper.c:64 msgid "submodule--helper print-default-remote takes no arguments" msgstr "submodule--helper print-default-remote 不带参数" -#: builtin/submodule--helper.c:100 +#: builtin/submodule--helper.c:102 #, c-format msgid "cannot strip one component off url '%s'" msgstr "无法从 url '%s' 剥离一个组件" -#: builtin/submodule--helper.c:408 builtin/submodule--helper.c:1368 +#: builtin/submodule--helper.c:410 builtin/submodule--helper.c:1380 msgid "alternative anchor for relative paths" msgstr "相对路径的替代锚记（anchor）" -#: builtin/submodule--helper.c:413 +#: builtin/submodule--helper.c:415 msgid "git submodule--helper list [--prefix=] [...]" msgstr "git submodule--helper list [--prefix=<路径>] [<路径>...]" -#: builtin/submodule--helper.c:470 builtin/submodule--helper.c:628 -#: builtin/submodule--helper.c:651 +#: builtin/submodule--helper.c:472 builtin/submodule--helper.c:630 +#: builtin/submodule--helper.c:653 #, c-format msgid "No url found for submodule path '%s' in .gitmodules" msgstr "在 .gitmodules 中未找到子模组 '%s' 的 url" -#: builtin/submodule--helper.c:522 +#: builtin/submodule--helper.c:524 #, c-format msgid "Entering '%s'\n" msgstr "进入 '%s'\n" -#: builtin/submodule--helper.c:525 +#: builtin/submodule--helper.c:527 #, c-format msgid "" "run_command returned non-zero status for %s\n" @@ -19435,7 +20030,7 @@ msgstr "" "对 %s 执行 run_command 返回非零值。\n" "." -#: builtin/submodule--helper.c:547 +#: builtin/submodule--helper.c:549 #, c-format msgid "" "run_command returned non-zero status while recursing in the nested " @@ -19445,119 +20040,119 @@ msgstr "" "在递归 %s 的子模组执行 run_command 时返回非零值。\n" "." -#: builtin/submodule--helper.c:563 +#: builtin/submodule--helper.c:565 msgid "Suppress output of entering each submodule command" msgstr "阻止进入每一个子模组命令的输出" -#: builtin/submodule--helper.c:565 builtin/submodule--helper.c:1050 +#: builtin/submodule--helper.c:567 builtin/submodule--helper.c:1053 msgid "Recurse into nested submodules" msgstr "递归进入嵌套子模组中" -#: builtin/submodule--helper.c:570 +#: builtin/submodule--helper.c:572 msgid "git submodule--helper foreach [--quiet] [--recursive] [--] " msgstr "git submodule--helper foreach [--quiet] [--recursive] [--] <命令>" -#: builtin/submodule--helper.c:597 +#: builtin/submodule--helper.c:599 #, c-format msgid "" "could not look up configuration '%s'. Assuming this repository is its own " "authoritative upstream." msgstr "无法找到配置 '%s'。假定这个仓库是其自身的官方上游。" -#: builtin/submodule--helper.c:665 +#: builtin/submodule--helper.c:667 #, c-format msgid "Failed to register url for submodule path '%s'" msgstr "无法为子模组 '%s' 注册 url" -#: builtin/submodule--helper.c:669 +#: builtin/submodule--helper.c:671 #, c-format msgid "Submodule '%s' (%s) registered for path '%s'\n" msgstr "子模组 '%s'（%s）已对路径 '%s' 注册\n" -#: builtin/submodule--helper.c:679 +#: builtin/submodule--helper.c:681 #, c-format msgid "warning: command update mode suggested for submodule '%s'\n" msgstr "警告：建议子模组 '%s' 使用命令更新模式\n" -#: builtin/submodule--helper.c:686 +#: builtin/submodule--helper.c:688 #, c-format msgid "Failed to register update mode for submodule path '%s'" msgstr "无法为子模组 '%s' 注册更新模式" -#: builtin/submodule--helper.c:708 +#: builtin/submodule--helper.c:710 msgid "Suppress output for initializing a submodule" msgstr "阻止子模组初始化的输出" -#: builtin/submodule--helper.c:713 +#: builtin/submodule--helper.c:715 msgid "git submodule--helper init [] []" msgstr "git submodule--helper init [<选项>] [<路径>]" -#: builtin/submodule--helper.c:785 builtin/submodule--helper.c:911 +#: builtin/submodule--helper.c:787 builtin/submodule--helper.c:914 #, c-format msgid "no submodule mapping found in .gitmodules for path '%s'" msgstr "在 .gitmodules 中没有发现路径 '%s' 的子模组映射" -#: builtin/submodule--helper.c:824 +#: builtin/submodule--helper.c:827 #, c-format msgid "could not resolve HEAD ref inside the submodule '%s'" msgstr "无法解析子模组 '%s' 的 HEAD 引用" -#: builtin/submodule--helper.c:851 builtin/submodule--helper.c:1020 +#: builtin/submodule--helper.c:854 builtin/submodule--helper.c:1023 #, c-format msgid "failed to recurse into submodule '%s'" msgstr "递归子模组 '%s' 失败" -#: builtin/submodule--helper.c:875 builtin/submodule--helper.c:1186 +#: builtin/submodule--helper.c:878 builtin/submodule--helper.c:1189 msgid "Suppress submodule status output" msgstr "阻止子模组状态输出" -#: builtin/submodule--helper.c:876 +#: builtin/submodule--helper.c:879 msgid "" "Use commit stored in the index instead of the one stored in the submodule " "HEAD" msgstr "使用存储在索引中的提交，而非存储在子模组 HEAD 中的提交" -#: builtin/submodule--helper.c:877 +#: builtin/submodule--helper.c:880 msgid "recurse into nested submodules" msgstr "递归进入嵌套子模组中" -#: builtin/submodule--helper.c:882 +#: builtin/submodule--helper.c:885 msgid "git submodule status [--quiet] [--cached] [--recursive] [...]" msgstr "git submodule status [--quiet] [--cached] [--recursive] [<路径>...]" -#: builtin/submodule--helper.c:906 +#: builtin/submodule--helper.c:909 msgid "git submodule--helper name " msgstr "git submodule--helper name <路径>" -#: builtin/submodule--helper.c:970 +#: builtin/submodule--helper.c:973 #, c-format msgid "Synchronizing submodule url for '%s'\n" msgstr "为 '%s' 同步子模组 url\n" -#: builtin/submodule--helper.c:976 +#: builtin/submodule--helper.c:979 #, c-format msgid "failed to register url for submodule path '%s'" msgstr "无法为子模组路径 '%s' 注册 url" -#: builtin/submodule--helper.c:990 +#: builtin/submodule--helper.c:993 #, c-format msgid "failed to get the default remote for submodule '%s'" msgstr "无法得到子模组 '%s' 的默认远程关联" -#: builtin/submodule--helper.c:1001 +#: builtin/submodule--helper.c:1004 #, c-format msgid "failed to update remote for submodule '%s'" msgstr "无法为子模组 '%s' 更新远程关联" -#: builtin/submodule--helper.c:1048 +#: builtin/submodule--helper.c:1051 msgid "Suppress output of synchronizing submodule url" msgstr "阻止子模组 url 同步的输出" -#: builtin/submodule--helper.c:1055 +#: builtin/submodule--helper.c:1058 msgid "git submodule--helper sync [--quiet] [--recursive] []" msgstr "git submodule--helper sync [--quiet] [--recursive] [<路径>]" -#: builtin/submodule--helper.c:1109 +#: builtin/submodule--helper.c:1112 #, c-format msgid "" "Submodule work tree '%s' contains a .git directory (use 'rm -rf' if you " @@ -19566,87 +20161,103 @@ msgstr "" "子模组工作区 '%s' 包含一个 .git 目录（如果您确需删除它及其全部历史，使用 'rm " "-rf' 命令）" -#: builtin/submodule--helper.c:1121 +#: builtin/submodule--helper.c:1124 #, c-format msgid "" "Submodule work tree '%s' contains local modifications; use '-f' to discard " "them" msgstr "子模组工作区 '%s' 包含本地修改；使用 '-f' 丢弃它们" -#: builtin/submodule--helper.c:1129 +#: builtin/submodule--helper.c:1132 #, c-format msgid "Cleared directory '%s'\n" msgstr "已清除目录 '%s'\n" -#: builtin/submodule--helper.c:1131 +#: builtin/submodule--helper.c:1134 #, c-format msgid "Could not remove submodule work tree '%s'\n" msgstr "无法移除子模组工作区 '%s'\n" -#: builtin/submodule--helper.c:1142 +#: builtin/submodule--helper.c:1145 #, c-format msgid "could not create empty submodule directory %s" msgstr "不能创建空的子模组目录 %s" -#: builtin/submodule--helper.c:1158 +#: builtin/submodule--helper.c:1161 #, c-format msgid "Submodule '%s' (%s) unregistered for path '%s'\n" msgstr "子模组 '%s'（%s）未对路径 '%s' 注册\n" -#: builtin/submodule--helper.c:1187 +#: builtin/submodule--helper.c:1190 msgid "Remove submodule working trees even if they contain local changes" msgstr "删除子模组工作区，即使包含本地修改" -#: builtin/submodule--helper.c:1188 +#: builtin/submodule--helper.c:1191 msgid "Unregister all submodules" msgstr "将所有子模组取消注册" -#: builtin/submodule--helper.c:1193 +#: builtin/submodule--helper.c:1196 msgid "" "git submodule deinit [--quiet] [-f | --force] [--all | [--] [...]]" msgstr "" "git submodule deinit [--quiet] [-f | --force] [--all | [--] [<路径>...]]" -#: builtin/submodule--helper.c:1207 +#: builtin/submodule--helper.c:1210 msgid "Use '--all' if you really want to deinitialize all submodules" msgstr "如果您确实想要对所有子模组执行取消初始化，请使用 '--all'" -#: builtin/submodule--helper.c:1302 builtin/submodule--helper.c:1305 +#: builtin/submodule--helper.c:1275 +msgid "" +"An alternate computed from a superproject's alternate is invalid.\n" +"To allow Git to clone without an alternate in such a case, set\n" +"submodule.alternateErrorStrategy to 'info' or, equivalently, clone with\n" +"'--reference-if-able' instead of '--reference'." +msgstr "" +"从一个父项目的备用仓库中计算出的备用仓库无效。\n" +"此场景下，设置 submodule.alternateErrorStrategy 为 'info'，以允许\n" +"Git 不使用备用仓库克隆，或者等效地使用 '--reference-if-able' 而非\n" +"'--reference' 来克隆。" + +#: builtin/submodule--helper.c:1314 builtin/submodule--helper.c:1317 #, c-format msgid "submodule '%s' cannot add alternate: %s" msgstr "子模组 '%s' 不能添加仓库备选：%s" -#: builtin/submodule--helper.c:1341 +#: builtin/submodule--helper.c:1353 #, c-format msgid "Value '%s' for submodule.alternateErrorStrategy is not recognized" msgstr "不能识别 submodule.alternateErrorStrategy 的取值 '%s'" -#: builtin/submodule--helper.c:1348 +#: builtin/submodule--helper.c:1360 #, c-format msgid "Value '%s' for submodule.alternateLocation is not recognized" msgstr "不能识别 submodule.alternateLocaion 的取值 '%s'" -#: builtin/submodule--helper.c:1371 +#: builtin/submodule--helper.c:1383 msgid "where the new submodule will be cloned to" msgstr "新的子模组将要克隆的路径" -#: builtin/submodule--helper.c:1374 +#: builtin/submodule--helper.c:1386 msgid "name of the new submodule" msgstr "新子模组的名称" -#: builtin/submodule--helper.c:1377 +#: builtin/submodule--helper.c:1389 msgid "url where to clone the submodule from" msgstr "克隆子模组的 url 地址" -#: builtin/submodule--helper.c:1385 +#: builtin/submodule--helper.c:1397 msgid "depth for shallow clones" msgstr "浅克隆的深度" -#: builtin/submodule--helper.c:1388 builtin/submodule--helper.c:1872 +#: builtin/submodule--helper.c:1400 builtin/submodule--helper.c:1897 msgid "force cloning progress" msgstr "强制显示克隆进度" -#: builtin/submodule--helper.c:1393 +#: builtin/submodule--helper.c:1402 builtin/submodule--helper.c:1899 +msgid "disallow cloning into non-empty directory" +msgstr "不允许克隆到一个非空目录" + +#: builtin/submodule--helper.c:1407 msgid "" "git submodule--helper clone [--prefix=] [--quiet] [--reference " "] [--name ] [--depth ] --url --path " @@ -19654,142 +20265,152 @@ msgstr "" "git submodule--helper clone [--prefix=<路径>] [--quiet] [--reference <仓库>] " "[--name <名字>] [--depth <深度>] --url --path <路径>" -#: builtin/submodule--helper.c:1424 +#: builtin/submodule--helper.c:1431 +#, c-format +msgid "refusing to create/use '%s' in another submodule's git dir" +msgstr "拒绝在另一个子模组的 git dir 中创建/使用 '%s'" + +#: builtin/submodule--helper.c:1442 #, c-format msgid "clone of '%s' into submodule path '%s' failed" msgstr "无法克隆 '%s' 到子模组路径 '%s'" -#: builtin/submodule--helper.c:1438 +#: builtin/submodule--helper.c:1446 +#, c-format +msgid "directory not empty: '%s'" +msgstr "目录非空：'%s'" + +#: builtin/submodule--helper.c:1458 #, c-format msgid "could not get submodule directory for '%s'" msgstr "无法得到 '%s' 的子模组目录" -#: builtin/submodule--helper.c:1474 +#: builtin/submodule--helper.c:1494 #, c-format msgid "Invalid update mode '%s' for submodule path '%s'" msgstr "子模组 '%2$s' 的更新模式 '%1$s' 无效" -#: builtin/submodule--helper.c:1478 +#: builtin/submodule--helper.c:1498 #, c-format msgid "Invalid update mode '%s' configured for submodule path '%s'" msgstr "为子模组 '%2$s' 配置的更新模式 '%1$s' 无效" -#: builtin/submodule--helper.c:1571 +#: builtin/submodule--helper.c:1594 #, c-format msgid "Submodule path '%s' not initialized" msgstr "子模组 '%s' 尚未初始化" -#: builtin/submodule--helper.c:1575 +#: builtin/submodule--helper.c:1598 msgid "Maybe you want to use 'update --init'?" msgstr "也许您想要执行 'update --init'？" -#: builtin/submodule--helper.c:1605 +#: builtin/submodule--helper.c:1628 #, c-format msgid "Skipping unmerged submodule %s" msgstr "略过未合并的子模组 %s" -#: builtin/submodule--helper.c:1634 +#: builtin/submodule--helper.c:1657 #, c-format msgid "Skipping submodule '%s'" msgstr "略过子模组 '%s'" -#: builtin/submodule--helper.c:1778 +#: builtin/submodule--helper.c:1803 #, c-format msgid "Failed to clone '%s'. Retry scheduled" msgstr "克隆 '%s' 失败。按计划重试" -#: builtin/submodule--helper.c:1789 +#: builtin/submodule--helper.c:1814 #, c-format msgid "Failed to clone '%s' a second time, aborting" msgstr "第二次尝试克隆 '%s' 失败，退出" -#: builtin/submodule--helper.c:1851 builtin/submodule--helper.c:2093 +#: builtin/submodule--helper.c:1876 builtin/submodule--helper.c:2120 msgid "path into the working tree" msgstr "到工作区的路径" -#: builtin/submodule--helper.c:1854 +#: builtin/submodule--helper.c:1879 msgid "path into the working tree, across nested submodule boundaries" msgstr "工作区中的路径，递归嵌套子模组" -#: builtin/submodule--helper.c:1858 +#: builtin/submodule--helper.c:1883 msgid "rebase, merge, checkout or none" msgstr "rebase、merge、checkout 或 none" -#: builtin/submodule--helper.c:1864 +#: builtin/submodule--helper.c:1889 msgid "Create a shallow clone truncated to the specified number of revisions" msgstr "创建一个指定深度的浅克隆" -#: builtin/submodule--helper.c:1867 +#: builtin/submodule--helper.c:1892 msgid "parallel jobs" msgstr "并发任务" -#: builtin/submodule--helper.c:1869 +#: builtin/submodule--helper.c:1894 msgid "whether the initial clone should follow the shallow recommendation" msgstr "初始克隆是否应该遵守推荐的浅克隆选项" -#: builtin/submodule--helper.c:1870 +#: builtin/submodule--helper.c:1895 msgid "don't print cloning progress" msgstr "不要输出克隆进度" -#: builtin/submodule--helper.c:1877 +#: builtin/submodule--helper.c:1904 msgid "git submodule--helper update-clone [--prefix=] [...]" msgstr "git submodule--helper update-clone [--prefix=<路径>] [<路径>...]" -#: builtin/submodule--helper.c:1890 +#: builtin/submodule--helper.c:1917 msgid "bad value for update parameter" msgstr "update 参数取值错误" -#: builtin/submodule--helper.c:1938 +#: builtin/submodule--helper.c:1965 #, c-format msgid "" "Submodule (%s) branch configured to inherit branch from superproject, but " "the superproject is not on any branch" msgstr "子模组（%s）的分支配置为继承上级项目的分支，但是上级项目不在任何分支上" -#: builtin/submodule--helper.c:2061 +#: builtin/submodule--helper.c:2088 #, c-format msgid "could not get a repository handle for submodule '%s'" msgstr "无法获得子模组 '%s' 的仓库句柄" -#: builtin/submodule--helper.c:2094 +#: builtin/submodule--helper.c:2121 msgid "recurse into submodules" msgstr "在子模组中递归" -#: builtin/submodule--helper.c:2100 +#: builtin/submodule--helper.c:2127 msgid "git submodule--helper absorb-git-dirs [] [...]" msgstr "git submodule--helper absorb-git-dirs [<选项>] [<路径>...]" -#: builtin/submodule--helper.c:2156 +#: builtin/submodule--helper.c:2183 msgid "check if it is safe to write to the .gitmodules file" msgstr "检查写入 .gitmodules 文件是否安全" -#: builtin/submodule--helper.c:2159 +#: builtin/submodule--helper.c:2186 msgid "unset the config in the .gitmodules file" msgstr "取消 .gitmodules 文件中的设置" -#: builtin/submodule--helper.c:2164 +#: builtin/submodule--helper.c:2191 msgid "git submodule--helper config []" msgstr "git submodule--helper config <名称> [<值>]" -#: builtin/submodule--helper.c:2165 +#: builtin/submodule--helper.c:2192 msgid "git submodule--helper config --unset " msgstr "git submodule--helper config --unset <名称>" -#: builtin/submodule--helper.c:2166 +#: builtin/submodule--helper.c:2193 msgid "git submodule--helper config --check-writeable" msgstr "git submodule--helper config --check-writeable" -#: builtin/submodule--helper.c:2185 git-submodule.sh:171 +#: builtin/submodule--helper.c:2212 git-submodule.sh:173 #, sh-format msgid "please make sure that the .gitmodules file is in the working tree" msgstr "请确认 .gitmodules 文件在工作区里" -#: builtin/submodule--helper.c:2235 git.c:433 git.c:683 +#: builtin/submodule--helper.c:2262 git.c:433 git.c:684 #, c-format msgid "%s doesn't support --super-prefix" msgstr "%s 不支持 --super-prefix" -#: builtin/submodule--helper.c:2241 +#: builtin/submodule--helper.c:2268 #, c-format msgid "'%s' is not a valid submodule--helper subcommand" msgstr "'%s' 不是一个有效的 submodule--helper 子命令" @@ -20042,214 +20663,218 @@ msgstr "标签 '%s' 已存在" msgid "Updated tag '%s' (was %s)\n" msgstr "已更新标签 '%s'（曾为 %s）\n" -#: builtin/unpack-objects.c:500 +#: builtin/unpack-objects.c:501 msgid "Unpacking objects" msgstr "展开对象中" -#: builtin/update-index.c:83 +#: builtin/update-index.c:84 #, c-format msgid "failed to create directory %s" msgstr "创建目录 %s 失败" -#: builtin/update-index.c:99 +#: builtin/update-index.c:100 #, c-format msgid "failed to create file %s" msgstr "创建文件 %s 失败" -#: builtin/update-index.c:107 +#: builtin/update-index.c:108 #, c-format msgid "failed to delete file %s" msgstr "删除文件 %s 失败" -#: builtin/update-index.c:114 builtin/update-index.c:220 +#: builtin/update-index.c:115 builtin/update-index.c:221 #, c-format msgid "failed to delete directory %s" msgstr "删除目录 %s 失败" -#: builtin/update-index.c:139 +#: builtin/update-index.c:140 #, c-format msgid "Testing mtime in '%s' " msgstr "在 '%s' 中测试 mtime " -#: builtin/update-index.c:153 +#: builtin/update-index.c:154 msgid "directory stat info does not change after adding a new file" msgstr "添加一个新文件后，目录的状态信息未改变" -#: builtin/update-index.c:166 +#: builtin/update-index.c:167 msgid "directory stat info does not change after adding a new directory" msgstr "添加一个新目录后，目录的状态信息未改变" -#: builtin/update-index.c:179 +#: builtin/update-index.c:180 msgid "directory stat info changes after updating a file" msgstr "更新一个文件后，目录的状态信息被修改" -#: builtin/update-index.c:190 +#: builtin/update-index.c:191 msgid "directory stat info changes after adding a file inside subdirectory" msgstr "在子目录中添加文件后，目录的状态信息被修改" -#: builtin/update-index.c:201 +#: builtin/update-index.c:202 msgid "directory stat info does not change after deleting a file" msgstr "删除一个文件后，目录的状态信息未改变" -#: builtin/update-index.c:214 +#: builtin/update-index.c:215 msgid "directory stat info does not change after deleting a directory" msgstr "删除一个目录后，目录的状态信息未改变" -#: builtin/update-index.c:221 +#: builtin/update-index.c:222 msgid " OK" msgstr " OK" -#: builtin/update-index.c:589 +#: builtin/update-index.c:591 msgid "git update-index [] [--] [...]" msgstr "git update-index [<选项>] [--] [<文件>...]" -#: builtin/update-index.c:972 +#: builtin/update-index.c:974 msgid "continue refresh even when index needs update" msgstr "当索引需要更新时继续刷新" -#: builtin/update-index.c:975 +#: builtin/update-index.c:977 msgid "refresh: ignore submodules" msgstr "刷新：忽略子模组" -#: builtin/update-index.c:978 +#: builtin/update-index.c:980 msgid "do not ignore new files" msgstr "不忽略新的文件" -#: builtin/update-index.c:980 +#: builtin/update-index.c:982 msgid "let files replace directories and vice-versa" msgstr "让文件替换目录（反之亦然）" -#: builtin/update-index.c:982 +#: builtin/update-index.c:984 msgid "notice files missing from worktree" msgstr "通知文件从工作区丢失" -#: builtin/update-index.c:984 +#: builtin/update-index.c:986 msgid "refresh even if index contains unmerged entries" msgstr "即使索引区包含未合并的条目也执行刷新" -#: builtin/update-index.c:987 +#: builtin/update-index.c:989 msgid "refresh stat information" msgstr "刷新统计信息" -#: builtin/update-index.c:991 +#: builtin/update-index.c:993 msgid "like --refresh, but ignore assume-unchanged setting" msgstr "类似于 --refresh，但是忽略 assume-unchanged 设置" -#: builtin/update-index.c:995 +#: builtin/update-index.c:997 msgid ",," msgstr "<存取模式>,<对象>,<路径>" -#: builtin/update-index.c:996 +#: builtin/update-index.c:998 msgid "add the specified entry to the index" msgstr "添加指定的条目到索引区" -#: builtin/update-index.c:1006 +#: builtin/update-index.c:1008 msgid "mark files as \"not changing\"" msgstr "把文件标记为 \"没有变更\"" -#: builtin/update-index.c:1009 +#: builtin/update-index.c:1011 msgid "clear assumed-unchanged bit" msgstr "清除 assumed-unchanged 位" -#: builtin/update-index.c:1012 +#: builtin/update-index.c:1014 msgid "mark files as \"index-only\"" msgstr "把文件标记为 \"仅索引\"" -#: builtin/update-index.c:1015 +#: builtin/update-index.c:1017 msgid "clear skip-worktree bit" msgstr "清除 skip-worktree 位" -#: builtin/update-index.c:1018 +#: builtin/update-index.c:1020 +msgid "do not touch index-only entries" +msgstr "不要触碰仅索引条目" + +#: builtin/update-index.c:1022 msgid "add to index only; do not add content to object database" msgstr "只添加到索引区；不添加对象到对象库" -#: builtin/update-index.c:1020 +#: builtin/update-index.c:1024 msgid "remove named paths even if present in worktree" msgstr "即使存在工作区里，也删除路径" -#: builtin/update-index.c:1022 +#: builtin/update-index.c:1026 msgid "with --stdin: input lines are terminated by null bytes" msgstr "携带 --stdin：输入的行以 null 字符终止" -#: builtin/update-index.c:1024 +#: builtin/update-index.c:1028 msgid "read list of paths to be updated from standard input" msgstr "从标准输入中读取需要更新的路径列表" -#: builtin/update-index.c:1028 +#: builtin/update-index.c:1032 msgid "add entries from standard input to the index" msgstr "从标准输入添加条目到索引区" -#: builtin/update-index.c:1032 +#: builtin/update-index.c:1036 msgid "repopulate stages #2 and #3 for the listed paths" msgstr "为指定文件重新生成第2和第3暂存区" -#: builtin/update-index.c:1036 +#: builtin/update-index.c:1040 msgid "only update entries that differ from HEAD" msgstr "只更新与 HEAD 不同的条目" -#: builtin/update-index.c:1040 +#: builtin/update-index.c:1044 msgid "ignore files missing from worktree" msgstr "忽略工作区丢失的文件" -#: builtin/update-index.c:1043 +#: builtin/update-index.c:1047 msgid "report actions to standard output" msgstr "在标准输出显示操作" -#: builtin/update-index.c:1045 +#: builtin/update-index.c:1049 msgid "(for porcelains) forget saved unresolved conflicts" msgstr "(for porcelains) 忘记保存的未解决的冲突" -#: builtin/update-index.c:1049 +#: builtin/update-index.c:1053 msgid "write index in this format" msgstr "以这种格式写入索引区" -#: builtin/update-index.c:1051 +#: builtin/update-index.c:1055 msgid "enable or disable split index" msgstr "启用或禁用索引拆分" -#: builtin/update-index.c:1053 +#: builtin/update-index.c:1057 msgid "enable/disable untracked cache" msgstr "启用/禁用对未跟踪文件的缓存" -#: builtin/update-index.c:1055 +#: builtin/update-index.c:1059 msgid "test if the filesystem supports untracked cache" msgstr "测试文件系统是否支持未跟踪文件缓存" -#: builtin/update-index.c:1057 +#: builtin/update-index.c:1061 msgid "enable untracked cache without testing the filesystem" msgstr "无需检测文件系统，启用对未跟踪文件的缓存" -#: builtin/update-index.c:1059 +#: builtin/update-index.c:1063 msgid "write out the index even if is not flagged as changed" msgstr "即使没有被标记为已更改，也要写出索引" -#: builtin/update-index.c:1061 +#: builtin/update-index.c:1065 msgid "enable or disable file system monitor" msgstr "启用或禁用文件系统监控" -#: builtin/update-index.c:1063 +#: builtin/update-index.c:1067 msgid "mark files as fsmonitor valid" msgstr "标记文件为 fsmonitor 有效" -#: builtin/update-index.c:1066 +#: builtin/update-index.c:1070 msgid "clear fsmonitor valid bit" msgstr "清除 fsmonitor 有效位" -#: builtin/update-index.c:1169 +#: builtin/update-index.c:1173 msgid "" "core.splitIndex is set to false; remove or change it, if you really want to " "enable split index" msgstr "" "core.splitIndex 被设置为 false。如果您确实要启用索引拆分，请删除或修改它。" -#: builtin/update-index.c:1178 +#: builtin/update-index.c:1182 msgid "" "core.splitIndex is set to true; remove or change it, if you really want to " "disable split index" msgstr "" "core.splitIndex 被设置为 true。如果您确实要禁用索引拆分，请删除或修改它。" -#: builtin/update-index.c:1190 +#: builtin/update-index.c:1194 msgid "" "core.untrackedCache is set to true; remove or change it, if you really want " "to disable the untracked cache" @@ -20257,11 +20882,11 @@ msgstr "" "core.untrackedCache 被设置为 true。如果您确实要禁用未跟踪文件缓存，请删除或修" "改它。" -#: builtin/update-index.c:1194 +#: builtin/update-index.c:1198 msgid "Untracked cache disabled" msgstr "缓存未跟踪文件被禁用" -#: builtin/update-index.c:1202 +#: builtin/update-index.c:1206 msgid "" "core.untrackedCache is set to false; remove or change it, if you really want " "to enable the untracked cache" @@ -20269,25 +20894,25 @@ msgstr "" "core.untrackedCache 被设置为 false。如果您确实要启用未跟踪文件缓存，请删除或" "修改它。" -#: builtin/update-index.c:1206 +#: builtin/update-index.c:1210 #, c-format msgid "Untracked cache enabled for '%s'" msgstr "缓存未跟踪文件在 '%s' 启用" -#: builtin/update-index.c:1214 +#: builtin/update-index.c:1218 msgid "core.fsmonitor is unset; set it if you really want to enable fsmonitor" msgstr "core.fsmonitor 未设置；如果想要启用 fsmonitor 请设置该选项" -#: builtin/update-index.c:1218 +#: builtin/update-index.c:1222 msgid "fsmonitor enabled" msgstr "fsmonitor 被启用" -#: builtin/update-index.c:1221 +#: builtin/update-index.c:1225 msgid "" "core.fsmonitor is set; remove it if you really want to disable fsmonitor" msgstr "core.fsmonitor 已设置；如果想要禁用 fsmonitor 请移除该选项" -#: builtin/update-index.c:1225 +#: builtin/update-index.c:1229 msgid "fsmonitor disabled" msgstr "fsmonitor 被禁用" @@ -20677,16 +21302,21 @@ msgstr "将 <前缀> 子目录内容写到一个树对象" msgid "only useful for debugging" msgstr "只对调试有用" -#: fast-import.c:3118 +#: fast-import.c:3125 #, c-format msgid "Expected 'mark' command, got %s" msgstr "预期 'mark' 命令，得到 %s" -#: fast-import.c:3123 +#: fast-import.c:3130 #, c-format msgid "Expected 'to' command, got %s" msgstr "预期 'to' 命令，得到 %s" +#: fast-import.c:3254 +#, c-format +msgid "feature '%s' forbidden in input without --allow-unsafe-features" +msgstr "不带 --allow-unsafe-features 的输入中禁止使用功能 '%s'" + #: credential-cache--daemon.c:223 #, c-format msgid "" @@ -20820,17 +21450,17 @@ msgstr "到标准输出的未知写入错误" msgid "close failed on standard output" msgstr "标准输出关闭失败" -#: git.c:792 +#: git.c:793 #, c-format msgid "alias loop detected: expansion of '%s' does not terminate:%s" msgstr "检测到别名循环：'%s'的扩展未终止：%s" -#: git.c:842 +#: git.c:843 #, c-format msgid "cannot handle %s as a builtin" msgstr "不能作为内置命令处理 %s" -#: git.c:855 +#: git.c:856 #, c-format msgid "" "usage: %s\n" @@ -20839,12 +21469,12 @@ msgstr "" "用法：%s\n" "\n" -#: git.c:875 +#: git.c:876 #, c-format msgid "expansion of alias '%s' failed; '%s' is not a git command\n" msgstr "展开别名命令 '%s' 失败，'%s' 不是一个 git 命令\n" -#: git.c:887 +#: git.c:888 #, c-format msgid "failed to run command '%s': %s\n" msgstr "运行命令 '%s' 失败：%s\n" @@ -20862,30 +21492,30 @@ msgstr "不支持委托控制，因为 cURL < 7.22.0" msgid "Public key pinning not supported with cURL < 7.44.0" msgstr "不支持公钥文件锁定，因为 cURL < 7.44.0" -#: http.c:878 +#: http.c:876 msgid "CURLSSLOPT_NO_REVOKE not supported with cURL < 7.44.0" msgstr "不支持 CURLSSLOPT_NO_REVOKE，因为 cURL < 7.44.0" -#: http.c:951 +#: http.c:949 msgid "Protocol restrictions not supported with cURL < 7.19.4" msgstr "不支持协议限制，因为 cURL < 7.19.4" -#: http.c:1088 +#: http.c:1086 #, c-format msgid "Unsupported SSL backend '%s'. Supported SSL backends:" msgstr "不支持的 SSL 后端 '%s'。支持的 SSL 后端：" -#: http.c:1095 +#: http.c:1093 #, c-format msgid "Could not set SSL backend to '%s': cURL was built without SSL backends" msgstr "无法设置 SSL 后端为 '%s'：cURL: cURL 没有使用 SSL 后端构建" -#: http.c:1099 +#: http.c:1097 #, c-format msgid "Could not set SSL backend to '%s': already set" msgstr "无法将 SSL 后端设置为 '%s'：已经设置" -#: http.c:1968 +#: http.c:1966 #, c-format msgid "" "unable to update url base from redirection:\n" @@ -21013,30 +21643,39 @@ msgstr "参数" msgid "object filtering" msgstr "对象过滤" -#: parse-options.h:179 +#: parse-options.h:183 msgid "expiry-date" msgstr "到期时间" -#: parse-options.h:193 +#: parse-options.h:197 msgid "no-op (backward compatibility)" msgstr "空操作（向后兼容）" -#: parse-options.h:305 +#: parse-options.h:309 msgid "be more verbose" msgstr "更加详细" -#: parse-options.h:307 +#: parse-options.h:311 msgid "be more quiet" msgstr "更加安静" -#: parse-options.h:313 +#: parse-options.h:317 msgid "use digits to display SHA-1s" msgstr "用 位数字显示 SHA-1 哈希值" -#: parse-options.h:332 +#: parse-options.h:336 msgid "how to strip spaces and #comments from message" msgstr "设置如何删除提交说明里的空格和#注释" +#: parse-options.h:337 +msgid "read pathspec from file" +msgstr "从文件读取路径表达式" + +#: parse-options.h:338 +msgid "" +"with --pathspec-from-file, pathspec elements are separated with NUL character" +msgstr "使用 --pathspec-from-file，路径表达式用空字符分隔" + #: ref-filter.h:101 msgid "key" msgstr "key" @@ -21543,162 +22182,170 @@ msgid "Common Git shell script setup code" msgstr "常用的 Git shell 脚本设置代码" #: command-list.h:171 +msgid "Initialize and modify the sparse-checkout" +msgstr "初始化及修改稀疏检出" + +#: command-list.h:172 msgid "Stash the changes in a dirty working directory away" msgstr "贮藏脏工作区中的修改" -#: command-list.h:172 +#: command-list.h:173 msgid "Add file contents to the staging area" msgstr "将文件内容添加到索引" -#: command-list.h:173 +#: command-list.h:174 msgid "Show the working tree status" msgstr "显示工作区状态" -#: command-list.h:174 +#: command-list.h:175 msgid "Remove unnecessary whitespace" msgstr "删除不必要的空白字符" -#: command-list.h:175 +#: command-list.h:176 msgid "Initialize, update or inspect submodules" msgstr "初始化、更新或检查子模组" -#: command-list.h:176 +#: command-list.h:177 msgid "Bidirectional operation between a Subversion repository and Git" msgstr "Subersion 仓库和 Git 之间的双向操作" -#: command-list.h:177 +#: command-list.h:178 msgid "Switch branches" msgstr "切换分支" -#: command-list.h:178 +#: command-list.h:179 msgid "Read, modify and delete symbolic refs" msgstr "读取、修改和删除符号引用" -#: command-list.h:179 +#: command-list.h:180 msgid "Create, list, delete or verify a tag object signed with GPG" msgstr "创建、列出、删除或校验一个 GPG 签名的标签对象" -#: command-list.h:180 +#: command-list.h:181 msgid "Creates a temporary file with a blob's contents" msgstr "用 blob 数据对象的内容创建一个临时文件" -#: command-list.h:181 +#: command-list.h:182 msgid "Unpack objects from a packed archive" msgstr "从打包文件中解压缩对象" -#: command-list.h:182 +#: command-list.h:183 msgid "Register file contents in the working tree to the index" msgstr "将工作区的文件内容注册到索引" -#: command-list.h:183 +#: command-list.h:184 msgid "Update the object name stored in a ref safely" msgstr "安全地更新存储于引用中的对象名称" -#: command-list.h:184 +#: command-list.h:185 msgid "Update auxiliary info file to help dumb servers" msgstr "更新辅助信息文件以帮助哑协议服务" -#: command-list.h:185 +#: command-list.h:186 msgid "Send archive back to git-archive" msgstr "将存档发送回 git-archive" -#: command-list.h:186 +#: command-list.h:187 msgid "Send objects packed back to git-fetch-pack" msgstr "将对象压缩包发送回 git-fetch-pack" -#: command-list.h:187 +#: command-list.h:188 msgid "Show a Git logical variable" msgstr "显示一个Git逻辑变量" -#: command-list.h:188 +#: command-list.h:189 msgid "Check the GPG signature of commits" msgstr "检查 GPG 提交签名" -#: command-list.h:189 +#: command-list.h:190 msgid "Validate packed Git archive files" msgstr "校验打包的Git存仓文件" -#: command-list.h:190 +#: command-list.h:191 msgid "Check the GPG signature of tags" msgstr "检查标签的 GPG 签名" -#: command-list.h:191 +#: command-list.h:192 msgid "Git web interface (web frontend to Git repositories)" msgstr "Git web 界面（Git 仓库的 web 前端）" -#: command-list.h:192 +#: command-list.h:193 msgid "Show logs with difference each commit introduces" msgstr "显示每一个提交引入的差异日志" -#: command-list.h:193 +#: command-list.h:194 msgid "Manage multiple working trees" msgstr "管理多个工作区" -#: command-list.h:194 +#: command-list.h:195 msgid "Create a tree object from the current index" msgstr "从当前索引创建一个树对象" -#: command-list.h:195 +#: command-list.h:196 msgid "Defining attributes per path" msgstr "定义路径的属性" -#: command-list.h:196 +#: command-list.h:197 msgid "Git command-line interface and conventions" msgstr "Git 命令行界面和约定" -#: command-list.h:197 +#: command-list.h:198 msgid "A Git core tutorial for developers" msgstr "面向开发人员的 Git 核心教程" -#: command-list.h:198 +#: command-list.h:199 msgid "Git for CVS users" msgstr "适合 CVS 用户的 Git 帮助" -#: command-list.h:199 +#: command-list.h:200 msgid "Tweaking diff output" msgstr "调整差异输出" -#: command-list.h:200 +#: command-list.h:201 msgid "A useful minimum set of commands for Everyday Git" msgstr "每一天 Git 的一组有用的最小命令集合" -#: command-list.h:201 +#: command-list.h:202 msgid "A Git Glossary" msgstr "Git 词汇表" -#: command-list.h:202 +#: command-list.h:203 msgid "Hooks used by Git" msgstr "Git 使用的钩子" -#: command-list.h:203 +#: command-list.h:204 msgid "Specifies intentionally untracked files to ignore" msgstr "忽略指定的未跟踪文件" -#: command-list.h:204 +#: command-list.h:205 msgid "Defining submodule properties" msgstr "定义子模组属性" -#: command-list.h:205 +#: command-list.h:206 msgid "Git namespaces" msgstr "Git 名字空间" -#: command-list.h:206 +#: command-list.h:207 msgid "Git Repository Layout" msgstr "Git 仓库布局" -#: command-list.h:207 +#: command-list.h:208 msgid "Specifying revisions and ranges for Git" msgstr "指定 Git 的版本和版本范围" -#: command-list.h:208 +#: command-list.h:209 +msgid "Mounting one repository inside another" +msgstr "将一个仓库安装到另外一个仓库中" + +#: command-list.h:210 msgid "A tutorial introduction to Git: part two" msgstr "一个 Git 教程：第二部分" -#: command-list.h:209 +#: command-list.h:211 msgid "A tutorial introduction to Git" msgstr "一个 Git 教程" -#: command-list.h:210 +#: command-list.h:212 msgid "An overview of recommended workflows with Git" msgstr "Git 推荐的工作流概览" @@ -21824,113 +22471,113 @@ msgstr "尝试和 $pretty_name 的简单合并" msgid "Simple merge did not work, trying automatic merge." msgstr "简单合并未生效，尝试自动合并。" -#: git-legacy-stash.sh:220 +#: git-legacy-stash.sh:221 msgid "Cannot remove temporary index (can't happen)" msgstr "无法删除临时索引（不应发生）" -#: git-legacy-stash.sh:271 +#: git-legacy-stash.sh:272 #, sh-format msgid "Cannot update $ref_stash with $w_commit" msgstr "无法用 $w_commit 更新 $ref_stash" -#: git-legacy-stash.sh:323 +#: git-legacy-stash.sh:324 #, sh-format msgid "error: unknown option for 'stash push': $option" msgstr "错误：'stash push' 的未知选项：$option" -#: git-legacy-stash.sh:355 +#: git-legacy-stash.sh:356 #, sh-format msgid "Saved working directory and index state $stash_msg" msgstr "保存工作目录和索引状态 $stash_msg" -#: git-legacy-stash.sh:535 +#: git-legacy-stash.sh:536 #, sh-format msgid "unknown option: $opt" msgstr "未知选项: $opt" -#: git-legacy-stash.sh:555 +#: git-legacy-stash.sh:556 #, sh-format msgid "Too many revisions specified: $REV" msgstr "指定了太多的版本：$REV" -#: git-legacy-stash.sh:570 +#: git-legacy-stash.sh:571 #, sh-format msgid "$reference is not a valid reference" msgstr "$reference 不是一个有效的引用" -#: git-legacy-stash.sh:598 +#: git-legacy-stash.sh:599 #, sh-format msgid "'$args' is not a stash-like commit" msgstr "'$args' 不是贮藏式提交" -#: git-legacy-stash.sh:609 +#: git-legacy-stash.sh:610 #, sh-format msgid "'$args' is not a stash reference" msgstr "'$args' 不是一个贮藏引用" -#: git-legacy-stash.sh:617 +#: git-legacy-stash.sh:618 msgid "unable to refresh index" msgstr "无法刷新索引" -#: git-legacy-stash.sh:621 +#: git-legacy-stash.sh:622 msgid "Cannot apply a stash in the middle of a merge" msgstr "无法在合并过程应用贮藏" -#: git-legacy-stash.sh:629 +#: git-legacy-stash.sh:630 msgid "Conflicts in index. Try without --index." msgstr "索引中有冲突。尝试不使用 --index。" -#: git-legacy-stash.sh:631 +#: git-legacy-stash.sh:632 msgid "Could not save index tree" msgstr "不能保存索引树" -#: git-legacy-stash.sh:640 +#: git-legacy-stash.sh:641 msgid "Could not restore untracked files from stash entry" msgstr "无法从贮藏条目中恢复未跟踪文件" -#: git-legacy-stash.sh:665 +#: git-legacy-stash.sh:666 msgid "Cannot unstage modified files" msgstr "无法将修改的文件取消暂存" -#: git-legacy-stash.sh:703 +#: git-legacy-stash.sh:704 #, sh-format msgid "Dropped ${REV} ($s)" msgstr "丢弃了 ${REV} ($s)" -#: git-legacy-stash.sh:704 +#: git-legacy-stash.sh:705 #, sh-format msgid "${REV}: Could not drop stash entry" msgstr "${REV}：无法丢弃贮藏条目" -#: git-legacy-stash.sh:791 +#: git-legacy-stash.sh:792 msgid "(To restore them type \"git stash apply\")" msgstr "（为恢复数据输入 \"git stash apply\"）" -#: git-submodule.sh:200 +#: git-submodule.sh:202 msgid "Relative path can only be used from the toplevel of the working tree" msgstr "只能在工作区的顶级目录中使用相对路径" -#: git-submodule.sh:210 +#: git-submodule.sh:212 #, sh-format msgid "repo URL: '$repo' must be absolute or begin with ./|../" msgstr "仓库 URL：'$repo' 必须是绝对路径或以 ./|../ 起始" -#: git-submodule.sh:229 +#: git-submodule.sh:231 #, sh-format msgid "'$sm_path' already exists in the index" msgstr "'$sm_path' 已经存在于索引中" -#: git-submodule.sh:232 +#: git-submodule.sh:234 #, sh-format msgid "'$sm_path' already exists in the index and is not a submodule" msgstr "'$sm_path' 已经存在于索引中且不是一个子模组" -#: git-submodule.sh:239 +#: git-submodule.sh:241 #, sh-format msgid "'$sm_path' does not have a commit checked out" msgstr "'$sm_path' 没有检出的提交" -#: git-submodule.sh:245 +#: git-submodule.sh:247 #, sh-format msgid "" "The following path is ignored by one of your .gitignore files:\n" @@ -21941,22 +22588,22 @@ msgstr "" "$sm_path\n" "如果您确实想添加它，使用 -f 参数。" -#: git-submodule.sh:268 +#: git-submodule.sh:270 #, sh-format msgid "Adding existing repo at '$sm_path' to the index" msgstr "添加位于 '$sm_path' 的现存仓库到索引" -#: git-submodule.sh:270 +#: git-submodule.sh:272 #, sh-format msgid "'$sm_path' already exists and is not a valid git repo" msgstr "'$sm_path' 已存在且不是一个有效的 git 仓库" -#: git-submodule.sh:278 +#: git-submodule.sh:280 #, sh-format msgid "A git directory for '$sm_name' is found locally with remote(s):" msgstr "本地发现 '$sm_name' 的一个 git 目录，与其对应的远程仓库：" -#: git-submodule.sh:280 +#: git-submodule.sh:282 #, sh-format msgid "" "If you want to reuse this local git directory instead of cloning again from\n" @@ -21971,51 +22618,51 @@ msgstr "" "使用 '--force' 选项。如果本地 git 目录不是正确的仓库\n" "或者您不确定这里的含义，使用 '--name' 选项选择另外的名称。" -#: git-submodule.sh:286 +#: git-submodule.sh:288 #, sh-format msgid "Reactivating local git directory for submodule '$sm_name'." msgstr "激活本地 git 目录到子模组 '$sm_name'。" -#: git-submodule.sh:298 +#: git-submodule.sh:300 #, sh-format msgid "Unable to checkout submodule '$sm_path'" msgstr "不能检出子模组 '$sm_path'" -#: git-submodule.sh:303 +#: git-submodule.sh:305 #, sh-format msgid "Failed to add submodule '$sm_path'" msgstr "无法添加子模组 '$sm_path'" -#: git-submodule.sh:312 +#: git-submodule.sh:314 #, sh-format msgid "Failed to register submodule '$sm_path'" msgstr "无法注册子模组 '$sm_path'" -#: git-submodule.sh:573 +#: git-submodule.sh:580 #, sh-format msgid "Unable to find current revision in submodule path '$displaypath'" msgstr "无法在子模组路径 '$displaypath' 中找到当前版本" -#: git-submodule.sh:583 +#: git-submodule.sh:590 #, sh-format msgid "Unable to fetch in submodule path '$sm_path'" msgstr "无法在子模组路径 '$sm_path' 中获取" -#: git-submodule.sh:588 +#: git-submodule.sh:595 #, sh-format msgid "" "Unable to find current ${remote_name}/${branch} revision in submodule path " "'$sm_path'" msgstr "无法在子模组路径 '$sm_path' 中找到当前版本 ${remote_name}/${branch}" -#: git-submodule.sh:606 +#: git-submodule.sh:613 #, sh-format msgid "" "Unable to fetch in submodule path '$displaypath'; trying to directly fetch " "$sha1:" msgstr "无法在子模组路径 '$displaypath' 中获取，尝试直接获取 $sha1：" -#: git-submodule.sh:612 +#: git-submodule.sh:619 #, sh-format msgid "" "Fetched in submodule path '$displaypath', but it did not contain $sha1. " @@ -22023,74 +22670,74 @@ msgid "" msgstr "" "获取了子模组路径 '$displaypath'，但是它没有包含 $sha1。直接获取该提交失败。" -#: git-submodule.sh:619 +#: git-submodule.sh:626 #, sh-format msgid "Unable to checkout '$sha1' in submodule path '$displaypath'" msgstr "无法在子模组路径 '$displaypath' 中检出 '$sha1'" -#: git-submodule.sh:620 +#: git-submodule.sh:627 #, sh-format msgid "Submodule path '$displaypath': checked out '$sha1'" msgstr "子模组路径 '$displaypath'：检出 '$sha1'" -#: git-submodule.sh:624 +#: git-submodule.sh:631 #, sh-format msgid "Unable to rebase '$sha1' in submodule path '$displaypath'" msgstr "无法在子模组路径 '$displaypath' 中变基 '$sha1'" -#: git-submodule.sh:625 +#: git-submodule.sh:632 #, sh-format msgid "Submodule path '$displaypath': rebased into '$sha1'" msgstr "子模组路径 '$displaypath'：变基至 '$sha1'" -#: git-submodule.sh:630 +#: git-submodule.sh:637 #, sh-format msgid "Unable to merge '$sha1' in submodule path '$displaypath'" msgstr "无法合并 '$sha1' 到子模组路径 '$displaypath' 中" -#: git-submodule.sh:631 +#: git-submodule.sh:638 #, sh-format msgid "Submodule path '$displaypath': merged in '$sha1'" msgstr "子模组路径 '$displaypath'：已合并入 '$sha1'" -#: git-submodule.sh:636 +#: git-submodule.sh:643 #, sh-format msgid "Execution of '$command $sha1' failed in submodule path '$displaypath'" msgstr "在子模组 '$displaypath' 中执行 '$command $sha1' 失败" -#: git-submodule.sh:637 +#: git-submodule.sh:644 #, sh-format msgid "Submodule path '$displaypath': '$command $sha1'" msgstr "子模组 '$displaypath'：'$command $sha1'" -#: git-submodule.sh:668 +#: git-submodule.sh:675 #, sh-format msgid "Failed to recurse into submodule path '$displaypath'" msgstr "无法递归进子模组路径 '$displaypath'" -#: git-submodule.sh:830 +#: git-submodule.sh:886 msgid "The --cached option cannot be used with the --files option" msgstr "选项 --cached 不能和选项 --files 同时使用" -#: git-submodule.sh:882 +#: git-submodule.sh:938 #, sh-format msgid "unexpected mode $mod_dst" msgstr "意外的模式 $mod_dst" # 译者：注意保持前导空格 -#: git-submodule.sh:902 +#: git-submodule.sh:958 #, sh-format msgid " Warn: $display_name doesn't contain commit $sha1_src" msgstr " 警告：$display_name 未包含提交 $sha1_src" # 译者：注意保持前导空格 -#: git-submodule.sh:905 +#: git-submodule.sh:961 #, sh-format msgid " Warn: $display_name doesn't contain commit $sha1_dst" msgstr " 警告：$display_name 未包含提交 $sha1_dst" # 译者：注意保持前导空格 -#: git-submodule.sh:908 +#: git-submodule.sh:964 #, sh-format msgid " Warn: $display_name doesn't contain commits $sha1_src and $sha1_dst" msgstr " 警告：$display_name 未包含提交 $sha1_src 和 $sha1_dst" @@ -22463,122 +23110,56 @@ msgid "Unable to determine absolute path of git directory" msgstr "不能确定 git 目录的绝对路径" #. TRANSLATORS: you can adjust this to align "git add -i" status menu -#: git-add--interactive.perl:210 +#: git-add--interactive.perl:212 #, perl-format msgid "%12s %12s %s" msgstr "%12s %12s %s" -#: git-add--interactive.perl:211 -msgid "staged" -msgstr "缓存" - -#: git-add--interactive.perl:211 -msgid "unstaged" -msgstr "未缓存" - -#: git-add--interactive.perl:267 git-add--interactive.perl:292 -msgid "binary" -msgstr "二进制" - -#: git-add--interactive.perl:276 git-add--interactive.perl:330 -msgid "nothing" -msgstr "无" - -#: git-add--interactive.perl:312 git-add--interactive.perl:327 -msgid "unchanged" -msgstr "没有修改" - -#: git-add--interactive.perl:623 -#, perl-format -msgid "added %d path\n" -msgid_plural "added %d paths\n" -msgstr[0] "增加了 %d 个路径\n" -msgstr[1] "增加了 %d 个路径\n" - -#: git-add--interactive.perl:626 -#, perl-format -msgid "updated %d path\n" -msgid_plural "updated %d paths\n" -msgstr[0] "更新了 %d 个路径\n" -msgstr[1] "更新了 %d 个路径\n" - -#: git-add--interactive.perl:629 -#, perl-format -msgid "reverted %d path\n" -msgid_plural "reverted %d paths\n" -msgstr[0] "还原了 %d 个路径\n" -msgstr[1] "还原了 %d 个路径\n" - -#: git-add--interactive.perl:632 +#: git-add--interactive.perl:634 #, perl-format msgid "touched %d path\n" msgid_plural "touched %d paths\n" msgstr[0] "触碰了 %d 个路径\n" msgstr[1] "触碰了 %d 个路径\n" -#: git-add--interactive.perl:641 -msgid "Update" -msgstr "更新" - -#: git-add--interactive.perl:653 -msgid "Revert" -msgstr "还原" - -#: git-add--interactive.perl:676 -#, perl-format -msgid "note: %s is untracked now.\n" -msgstr "说明：%s 现已成为未跟踪的。\n" - -#: git-add--interactive.perl:687 -msgid "Add untracked" -msgstr "添加未跟踪的" - -#: git-add--interactive.perl:693 -msgid "No untracked files.\n" -msgstr "没有未跟踪的文件。\n" - -#: git-add--interactive.perl:1051 +#: git-add--interactive.perl:1053 msgid "" "If the patch applies cleanly, the edited hunk will immediately be\n" "marked for staging." msgstr "如果补丁能干净地应用，编辑块将立即标记为暂存。" -#: git-add--interactive.perl:1054 +#: git-add--interactive.perl:1056 msgid "" "If the patch applies cleanly, the edited hunk will immediately be\n" "marked for stashing." msgstr "如果补丁能干净地应用，编辑块将立即标记为贮藏。" -#: git-add--interactive.perl:1057 +#: git-add--interactive.perl:1059 msgid "" "If the patch applies cleanly, the edited hunk will immediately be\n" "marked for unstaging." msgstr "如果补丁能干净地应用，编辑块将立即标记为未暂存。" -#: git-add--interactive.perl:1060 git-add--interactive.perl:1069 -#: git-add--interactive.perl:1075 +#: git-add--interactive.perl:1062 git-add--interactive.perl:1071 +#: git-add--interactive.perl:1077 msgid "" "If the patch applies cleanly, the edited hunk will immediately be\n" "marked for applying." msgstr "如果补丁能干净地应用，编辑块将立即标记为应用。" -#: git-add--interactive.perl:1063 git-add--interactive.perl:1066 -#: git-add--interactive.perl:1072 +#: git-add--interactive.perl:1065 git-add--interactive.perl:1068 +#: git-add--interactive.perl:1074 msgid "" "If the patch applies cleanly, the edited hunk will immediately be\n" "marked for discarding." msgstr "如果补丁能干净地应用，编辑块将立即标记为丢弃。" -#: git-add--interactive.perl:1109 +#: git-add--interactive.perl:1111 #, perl-format msgid "failed to open hunk edit file for writing: %s" msgstr "为写入打开块编辑文件失败：%s" -#: git-add--interactive.perl:1110 -msgid "Manual hunk edit mode -- see bottom for a quick guide.\n" -msgstr "手动块编辑模式 -- 查看底部的快速指南。\n" - -#: git-add--interactive.perl:1116 +#: git-add--interactive.perl:1118 #, perl-format msgid "" "---\n" @@ -22591,33 +23172,12 @@ msgstr "" "要删除 '%s' 开始的行，删除它们。\n" "以 %s 开始的行将被删除。\n" -#. TRANSLATORS: 'it' refers to the patch mentioned in the previous messages. -#: git-add--interactive.perl:1124 -msgid "" -"If it does not apply cleanly, you will be given an opportunity to\n" -"edit again. If all lines of the hunk are removed, then the edit is\n" -"aborted and the hunk is left unchanged.\n" -msgstr "" -"如果不能干净地应用，您将有机会重新编辑。如果该块的全部内容删除，则\n" -"此次编辑被终止，该块不会被修改。\n" - -#: git-add--interactive.perl:1138 +#: git-add--interactive.perl:1140 #, perl-format msgid "failed to open hunk edit file for reading: %s" msgstr "无法读取块编辑文件：%s" -#. TRANSLATORS: do not translate [y/n] -#. The program will only accept that input -#. at this point. -#. Consider translating (saying "no" discards!) as -#. (saying "n" for "no" discards!) if the translation -#. of the word "no" does not start with n. -#: git-add--interactive.perl:1237 -msgid "" -"Your edited hunk does not apply. Edit again (saying \"no\" discards!) [y/n]? " -msgstr "您的编辑块不能被应用。重新编辑（选择 \"no\" 丢弃！） [y/n]? " - -#: git-add--interactive.perl:1246 +#: git-add--interactive.perl:1248 msgid "" "y - stage this hunk\n" "n - do not stage this hunk\n" @@ -22631,7 +23191,7 @@ msgstr "" "a - 暂存该块和本文件中后面的全部块\n" "d - 不暂存该块和本文件中后面的全部块" -#: git-add--interactive.perl:1252 +#: git-add--interactive.perl:1254 msgid "" "y - stash this hunk\n" "n - do not stash this hunk\n" @@ -22645,7 +23205,7 @@ msgstr "" "a - 贮藏该块和本文件中后面的全部块\n" "d - 不贮藏该块和本文件中后面的全部块" -#: git-add--interactive.perl:1258 +#: git-add--interactive.perl:1260 msgid "" "y - unstage this hunk\n" "n - do not unstage this hunk\n" @@ -22659,7 +23219,7 @@ msgstr "" "a - 不暂存该块和本文件中后面的全部块\n" "d - 不要不暂存该块和本文件中后面的全部块" -#: git-add--interactive.perl:1264 +#: git-add--interactive.perl:1266 msgid "" "y - apply this hunk to index\n" "n - do not apply this hunk to index\n" @@ -22673,7 +23233,7 @@ msgstr "" "a - 应用该块和本文件中后面的全部块\n" "d - 不要应用该块和本文件中后面的全部块" -#: git-add--interactive.perl:1270 git-add--interactive.perl:1288 +#: git-add--interactive.perl:1272 git-add--interactive.perl:1290 msgid "" "y - discard this hunk from worktree\n" "n - do not discard this hunk from worktree\n" @@ -22687,7 +23247,7 @@ msgstr "" "a - 丢弃该块和本文件中后面的全部块\n" "d - 不要丢弃该块和本文件中后面的全部块" -#: git-add--interactive.perl:1276 +#: git-add--interactive.perl:1278 msgid "" "y - discard this hunk from index and worktree\n" "n - do not discard this hunk from index and worktree\n" @@ -22701,7 +23261,7 @@ msgstr "" "a - 丢弃该块和本文件中后面的全部块\n" "d - 不要丢弃该块和本文件中后面的全部块" -#: git-add--interactive.perl:1282 +#: git-add--interactive.perl:1284 msgid "" "y - apply this hunk to index and worktree\n" "n - do not apply this hunk to index and worktree\n" @@ -22715,7 +23275,7 @@ msgstr "" "a - 应用该块和本文件中后面的全部块\n" "d - 不要应用该块和本文件中后面的全部块" -#: git-add--interactive.perl:1294 +#: git-add--interactive.perl:1296 msgid "" "y - apply this hunk to worktree\n" "n - do not apply this hunk to worktree\n" @@ -22729,7 +23289,7 @@ msgstr "" "a - 应用该块和本文件中后面的全部块\n" "d - 不要应用该块和本文件中后面的全部块" -#: git-add--interactive.perl:1309 +#: git-add--interactive.perl:1311 msgid "" "g - select a hunk to go to\n" "/ - search for a hunk matching the given regex\n" @@ -22751,226 +23311,198 @@ msgstr "" "e - 手动编辑当前块\n" "? - 显示帮助\n" -#: git-add--interactive.perl:1340 +#: git-add--interactive.perl:1342 msgid "The selected hunks do not apply to the index!\n" msgstr "选中的块不能应用到索引！\n" -#: git-add--interactive.perl:1341 +#: git-add--interactive.perl:1343 msgid "Apply them to the worktree anyway? " msgstr "无论如何都要应用到工作区么？" -#: git-add--interactive.perl:1344 +#: git-add--interactive.perl:1346 msgid "Nothing was applied.\n" msgstr "未应用。\n" -#: git-add--interactive.perl:1355 +#: git-add--interactive.perl:1357 #, perl-format msgid "ignoring unmerged: %s\n" msgstr "忽略未合入的：%s\n" -#: git-add--interactive.perl:1364 -msgid "Only binary files changed.\n" -msgstr "只有二进制文件被修改。\n" - -#: git-add--interactive.perl:1366 -msgid "No changes.\n" -msgstr "没有修改。\n" - -#: git-add--interactive.perl:1374 -msgid "Patch update" -msgstr "补丁更新" - -#: git-add--interactive.perl:1426 +#: git-add--interactive.perl:1428 #, perl-format msgid "Stage mode change [y,n,q,a,d%s,?]? " msgstr "暂存模式变更 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1427 +#: git-add--interactive.perl:1429 #, perl-format msgid "Stage deletion [y,n,q,a,d%s,?]? " msgstr "暂存删除动作 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1428 +#: git-add--interactive.perl:1430 #, perl-format msgid "Stage this hunk [y,n,q,a,d%s,?]? " msgstr "暂存该块 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1431 +#: git-add--interactive.perl:1433 #, perl-format msgid "Stash mode change [y,n,q,a,d%s,?]? " msgstr "贮藏模式变更 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1432 +#: git-add--interactive.perl:1434 #, perl-format msgid "Stash deletion [y,n,q,a,d%s,?]? " msgstr "贮藏删除动作 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1433 +#: git-add--interactive.perl:1435 #, perl-format msgid "Stash this hunk [y,n,q,a,d%s,?]? " msgstr "贮藏该块 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1436 +#: git-add--interactive.perl:1438 #, perl-format msgid "Unstage mode change [y,n,q,a,d%s,?]? " msgstr "取消暂存模式变更 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1437 +#: git-add--interactive.perl:1439 #, perl-format msgid "Unstage deletion [y,n,q,a,d%s,?]? " msgstr "取消暂存删除动作 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1438 +#: git-add--interactive.perl:1440 #, perl-format msgid "Unstage this hunk [y,n,q,a,d%s,?]? " msgstr "取消暂存该块 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1441 +#: git-add--interactive.perl:1443 #, perl-format msgid "Apply mode change to index [y,n,q,a,d%s,?]? " msgstr "将模式变更应用到索引 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1442 +#: git-add--interactive.perl:1444 #, perl-format msgid "Apply deletion to index [y,n,q,a,d%s,?]? " msgstr "将删除操作应用到索引 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1443 +#: git-add--interactive.perl:1445 #, perl-format msgid "Apply this hunk to index [y,n,q,a,d%s,?]? " msgstr "将该块应用到索引 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1446 git-add--interactive.perl:1461 +#: git-add--interactive.perl:1448 git-add--interactive.perl:1463 #, perl-format msgid "Discard mode change from worktree [y,n,q,a,d%s,?]? " msgstr "从工作区中丢弃模式变更 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1447 git-add--interactive.perl:1462 +#: git-add--interactive.perl:1449 git-add--interactive.perl:1464 #, perl-format msgid "Discard deletion from worktree [y,n,q,a,d%s,?]? " msgstr "从工作区中丢弃删除动作 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1448 git-add--interactive.perl:1463 +#: git-add--interactive.perl:1450 git-add--interactive.perl:1465 #, perl-format msgid "Discard this hunk from worktree [y,n,q,a,d%s,?]? " msgstr "从工作区中丢弃该块 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1451 +#: git-add--interactive.perl:1453 #, perl-format msgid "Discard mode change from index and worktree [y,n,q,a,d%s,?]? " msgstr "从索引和工作区中丢弃模式变更 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1452 +#: git-add--interactive.perl:1454 #, perl-format msgid "Discard deletion from index and worktree [y,n,q,a,d%s,?]? " msgstr "从索引和工作区中丢弃删除 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1453 +#: git-add--interactive.perl:1455 #, perl-format msgid "Discard this hunk from index and worktree [y,n,q,a,d%s,?]? " msgstr "从索引和工作区中丢弃该块 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1456 +#: git-add--interactive.perl:1458 #, perl-format msgid "Apply mode change to index and worktree [y,n,q,a,d%s,?]? " msgstr "将模式变更应用到索引和工作区 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1457 +#: git-add--interactive.perl:1459 #, perl-format msgid "Apply deletion to index and worktree [y,n,q,a,d%s,?]? " msgstr "将删除操作应用到索引和工作区 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1458 +#: git-add--interactive.perl:1460 #, perl-format msgid "Apply this hunk to index and worktree [y,n,q,a,d%s,?]? " msgstr "将该块应用到索引和工作区 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1466 +#: git-add--interactive.perl:1468 #, perl-format msgid "Apply mode change to worktree [y,n,q,a,d%s,?]? " msgstr "将模式变更应用到工作区 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1467 +#: git-add--interactive.perl:1469 #, perl-format msgid "Apply deletion to worktree [y,n,q,a,d%s,?]? " msgstr "将删除操作应用到工作区 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1468 +#: git-add--interactive.perl:1470 #, perl-format msgid "Apply this hunk to worktree [y,n,q,a,d%s,?]? " msgstr "将该块应用到工作区 [y,n,q,a,d%s,?]? " -#: git-add--interactive.perl:1568 +#: git-add--interactive.perl:1570 msgid "No other hunks to goto\n" msgstr "没有其它可供跳转的块\n" -#: git-add--interactive.perl:1575 -msgid "go to which hunk ( to see more)? " -msgstr "跳转到哪个块（<回车> 查看更多）？ " - -#: git-add--interactive.perl:1577 -msgid "go to which hunk? " -msgstr "跳转到哪个块？" - -#: git-add--interactive.perl:1586 +#: git-add--interactive.perl:1588 #, perl-format msgid "Invalid number: '%s'\n" msgstr "无效数字：'%s'\n" -#: git-add--interactive.perl:1591 +#: git-add--interactive.perl:1593 #, perl-format msgid "Sorry, only %d hunk available.\n" msgid_plural "Sorry, only %d hunks available.\n" msgstr[0] "对不起，只有 %d 个可用块。\n" msgstr[1] "对不起，只有 %d 个可用块。\n" -#: git-add--interactive.perl:1617 +#: git-add--interactive.perl:1619 msgid "No other hunks to search\n" msgstr "没有其它可供查找的块\n" -#: git-add--interactive.perl:1621 -msgid "search for regex? " -msgstr "使用正则表达式搜索？" - -#: git-add--interactive.perl:1634 +#: git-add--interactive.perl:1636 #, perl-format msgid "Malformed search regexp %s: %s\n" msgstr "错误的正则表达式 %s：%s\n" -#: git-add--interactive.perl:1644 +#: git-add--interactive.perl:1646 msgid "No hunk matches the given pattern\n" -msgstr "没有和给定模式相匹配的快\n" +msgstr "没有和给定模式相匹配的块\n" -#: git-add--interactive.perl:1656 git-add--interactive.perl:1678 +#: git-add--interactive.perl:1658 git-add--interactive.perl:1680 msgid "No previous hunk\n" msgstr "没有前一个块\n" -#: git-add--interactive.perl:1665 git-add--interactive.perl:1684 +#: git-add--interactive.perl:1667 git-add--interactive.perl:1686 msgid "No next hunk\n" msgstr "没有下一个块\n" -#: git-add--interactive.perl:1690 +#: git-add--interactive.perl:1692 msgid "Sorry, cannot split this hunk\n" msgstr "对不起，不能拆分这个块\n" -#: git-add--interactive.perl:1696 +#: git-add--interactive.perl:1698 #, perl-format msgid "Split into %d hunk.\n" msgid_plural "Split into %d hunks.\n" msgstr[0] "拆分为 %d 块。\n" msgstr[1] "拆分为 %d 块。\n" -#: git-add--interactive.perl:1706 +#: git-add--interactive.perl:1708 msgid "Sorry, cannot edit this hunk\n" msgstr "对不起，不能编辑这个块\n" -#: git-add--interactive.perl:1752 -msgid "Review diff" -msgstr "检视 diff" - #. TRANSLATORS: please do not translate the command names #. 'status', 'update', 'revert', etc. -#: git-add--interactive.perl:1771 +#: git-add--interactive.perl:1773 msgid "" "status - show paths with changes\n" "update - add working tree state to the staged set of changes\n" @@ -22987,19 +23519,19 @@ msgstr "" "diff - 显示 HEAD 和索引间差异\n" "add untracked - 添加未跟踪文件的内容至暂存列表\n" -#: git-add--interactive.perl:1788 git-add--interactive.perl:1793 -#: git-add--interactive.perl:1796 git-add--interactive.perl:1803 -#: git-add--interactive.perl:1806 git-add--interactive.perl:1813 -#: git-add--interactive.perl:1817 git-add--interactive.perl:1823 +#: git-add--interactive.perl:1790 git-add--interactive.perl:1795 +#: git-add--interactive.perl:1798 git-add--interactive.perl:1805 +#: git-add--interactive.perl:1808 git-add--interactive.perl:1815 +#: git-add--interactive.perl:1819 git-add--interactive.perl:1825 msgid "missing --" msgstr "缺失 --" -#: git-add--interactive.perl:1819 +#: git-add--interactive.perl:1821 #, perl-format msgid "unknown --patch mode: %s" msgstr "未知的 --patch 模式：%s" -#: git-add--interactive.perl:1825 git-add--interactive.perl:1831 +#: git-add--interactive.perl:1827 git-add--interactive.perl:1833 #, perl-format msgid "invalid argument %s, expecting --" msgstr "无效的参数 %s，期望是 --" -- cgit v1.2.3