From c1d1128bef97ae16a6740538abe5fb81c67ed239 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Fri, 28 Apr 2006 02:32:44 -0700 Subject: git-am --resolved: more usable error message. After doing the hard work of hand resolving the conflicts in the working tree, if the user forgets to run update-index to mark the paths that have been resolved, the command gave an unfriendly "fatal: git-write-tree: not able to write tree" error message. Catch the situation early and give more meaningful message and suggestion. Noticed and suggested by Len Brown. Signed-off-by: Junio C Hamano --- git-am.sh | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/git-am.sh b/git-am.sh index eab4aa891e..872145b92d 100755 --- a/git-am.sh +++ b/git-am.sh @@ -376,6 +376,13 @@ do echo "No changes - did you forget update-index?" stop_here $this fi + unmerged=$(git-ls-files -u) + if test -n "$unmerged" + then + echo "You still have unmerged paths in your index" + echo "did you forget update-index?" + stop_here $this + fi apply_status=0 ;; esac -- cgit v1.2.3 From d0ad1653662a214baddc1d1ce669a28b91a3ae76 Mon Sep 17 00:00:00 2001 From: Matthias Kestenholz Date: Fri, 28 Apr 2006 10:42:28 +0200 Subject: annotate: fix warning about uninitialized scalar Use of uninitialized value in scalar chomp at ./git-annotate.perl line 212, <$kid> chunk 4. Signed-off-by: Matthias Kestenholz --- git-annotate.perl | 3 +++ 1 file changed, 3 insertions(+) diff --git a/git-annotate.perl b/git-annotate.perl index 9df72a1662..a7aab2566d 100755 --- a/git-annotate.perl +++ b/git-annotate.perl @@ -208,6 +208,9 @@ sub find_parent_renames { while (my $change = <$patch>) { chomp $change; my $filename = <$patch>; + if (!defined $filename) { + next; + } chomp $filename; if ($change =~ m/^[AMD]$/ ) { -- cgit v1.2.3 From fe77bb1a02d5b8dd3915cd27a83b660debaecda4 Mon Sep 17 00:00:00 2001 From: Matthias Kestenholz Date: Fri, 28 Apr 2006 10:41:19 +0200 Subject: annotate: display usage information if no filename was given Signed-off-by: Matthias Kestenholz --- git-annotate.perl | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/git-annotate.perl b/git-annotate.perl index a7aab2566d..a6a7a482cd 100755 --- a/git-annotate.perl +++ b/git-annotate.perl @@ -10,9 +10,10 @@ use warnings; use strict; use Getopt::Long; use POSIX qw(strftime gmtime); +use File::Basename qw(basename dirname); sub usage() { - print STDERR 'Usage: ${\basename $0} [-s] [-S revs-file] file [ revision ] + print STDERR "Usage: ${\basename $0} [-s] [-S revs-file] file [ revision ] -l, --long Show long rev (Defaults off) -t, --time @@ -23,7 +24,7 @@ sub usage() { Use revs from revs-file instead of calling git-rev-list -h, --help This message. -'; +"; exit(1); } @@ -35,7 +36,7 @@ my $rc = GetOptions( "long|l" => \$longrev, "help|h" => \$help, "rename|r" => \$rename, "rev-file|S=s" => \$rev_file); -if (!$rc or $help) { +if (!$rc or $help or !@ARGV) { usage(); } -- cgit v1.2.3 From 2eaf273d518717c84d748051e05210656f7b7e88 Mon Sep 17 00:00:00 2001 From: Sean Estabrooks Date: Fri, 28 Apr 2006 09:15:04 -0400 Subject: Update the git-branch man page to include the "-r" option, and fix up asciidoc "callouts" Signed-off-by: Sean Estabrooks --- Documentation/git-branch.txt | 57 ++++++++++++++++++++++++++++++-------------- git-branch.sh | 2 +- 2 files changed, 40 insertions(+), 19 deletions(-) diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 71ecd858aa..72fb2f89b4 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -3,22 +3,27 @@ git-branch(1) NAME ---- -git-branch - Create a new branch, or remove an old one +git-branch - List, create, or delete branches. SYNOPSIS -------- [verse] -'git-branch' [[-f] []] -'git-branch' (-d | -D) +'git-branch' [-r] +'git-branch' [-f] [] +'git-branch' (-d | -D) ... DESCRIPTION ----------- -If no argument is provided, show available branches and mark current -branch with star. Otherwise, create a new branch of name . -If a starting point is also specified, that will be where the branch is -created, otherwise it will be created at the current HEAD. +With no arguments given (or just `-r`) a list of available branches +will be shown, the current branch will be highlighted with an asterisk. -With a `-d` or `-D` option, `` will be deleted. +In its second form, a new branch named will be created. +It will start out with a head equal to the one given as . +If no is given, the branch will be created with a head +equal to that of the currently checked out branch. + +With a `-d` or `-D` option, `` will be deleted. You may +specify more than one branch for deletion. OPTIONS @@ -30,40 +35,56 @@ OPTIONS Delete a branch irrespective of its index status. -f:: - Force a reset of to (or current head). + Force the creation of a new branch even if it means deleting + a branch that already exists with the same name. + +-r:: + List only the "remote" branches. :: The name of the branch to create or delete. :: - Where to create the branch; defaults to HEAD. This - option has no meaning with -d and -D. + The new branch will be created with a HEAD equal to this. It may + be given as a branch name, a commit-id, or a tag. If this option + is omitted, the current branch is assumed. + Examples -~~~~~~~~ +-------- Start development off of a known tag:: + ------------ $ git clone git://git.kernel.org/pub/scm/.../linux-2.6 my2.6 $ cd my2.6 -$ git branch my2.6.14 v2.6.14 <1> +$ git branch my2.6.14 v2.6.14 <1> $ git checkout my2.6.14 - -<1> These two steps are the same as "checkout -b my2.6.14 v2.6.14". ------------ ++ +<1> This step and the next one could be combined into a single step with +"checkout -b my2.6.14 v2.6.14". Delete unneeded branch:: + ------------ $ git clone git://git.kernel.org/.../git.git my.git $ cd my.git -$ git branch -D todo <1> - +$ git branch -D todo <1> +------------ ++ <1> delete todo branch even if the "master" branch does not have all commits from todo branch. ------------- + + +Notes +----- + +If you are creating a branch that you want to immediately checkout, it's +easier to use the git checkout command with its `-b` option to create +a branch and check it out with a single command. + Author ------ diff --git a/git-branch.sh b/git-branch.sh index 663a3a370c..ebcc8989d8 100755 --- a/git-branch.sh +++ b/git-branch.sh @@ -1,6 +1,6 @@ #!/bin/sh -USAGE='[(-d | -D) ] | [[-f] []]' +USAGE='[(-d | -D) ] | [[-f] []] | -r' LONG_USAGE='If no arguments, show available branches and mark current branch with a star. If one argument, create a new branch based off of current HEAD. If two arguments, create a new branch based off of .' -- cgit v1.2.3 From 48aeecdcc14684111ddb8ac0ec3bfdc5245ee75e Mon Sep 17 00:00:00 2001 From: Sean Estabrooks Date: Fri, 28 Apr 2006 09:15:05 -0400 Subject: Fix up remaining man pages that use asciidoc "callouts". Unfortunately docbook does not allow a callout to be referenced from inside a callout list description. Rewrite one paragraph in git-reset man page to work around this limitation. Signed-off-by: Sean Estabrooks --- Documentation/everyday.txt | 45 ++++++++++++------------ Documentation/git-checkout.txt | 18 +++++----- Documentation/git-diff.txt | 38 ++++++++++---------- Documentation/git-init-db.txt | 8 ++--- Documentation/git-reset.txt | 72 ++++++++++++++++++-------------------- Documentation/git-update-index.txt | 31 ++++++++-------- 6 files changed, 104 insertions(+), 108 deletions(-) diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index 3ab9b916c2..4b56370937 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -61,7 +61,8 @@ $ git prune $ git count-objects <2> $ git repack <3> $ git prune <4> - +------------ ++ <1> running without "--full" is usually cheap and assures the repository health reasonably well. <2> check how many loose objects there are and how much @@ -69,17 +70,16 @@ diskspace is wasted by not repacking. <3> without "-a" repacks incrementally. repacking every 4-5MB of loose objects accumulation may be a good rule of thumb. <4> after repack, prune removes the duplicate loose objects. ------------- Repack a small project into single pack.:: + ------------ $ git repack -a -d <1> $ git prune - +------------ ++ <1> pack all the objects reachable from the refs into one pack and remove unneeded other packs ------------- Individual Developer (Standalone)[[Individual Developer (Standalone)]] @@ -129,10 +129,10 @@ $ git-init-db $ git add . <1> $ git commit -m 'import of frotz source tree.' $ git tag v2.43 <2> - +------------ ++ <1> add everything under the current directory. <2> make a lightweight, unannotated tag. ------------- Create a topic branch and develop.:: + @@ -153,7 +153,8 @@ $ git checkout master <9> $ git pull . alsa-audio <10> $ git log --since='3 days ago' <11> $ git log v2.43.. curses/ <12> - +------------ ++ <1> create a new topic branch. <2> revert your botched changes in "curses/ux_audio_oss.c". <3> you need to tell git if you added a new file; removal and @@ -170,7 +171,6 @@ you originally wrote. combined and include --max-count=10 (show 10 commits), --until='2005-12-10'. <12> view only the changes that touch what's in curses/ directory, since v2.43 tag. ------------- Individual Developer (Participant)[[Individual Developer (Participant)]] @@ -208,7 +208,8 @@ $ git pull git://git.kernel.org/pub/.../jgarzik/libata-dev.git ALL <5> $ git reset --hard ORIG_HEAD <6> $ git prune <7> $ git fetch --tags <8> - +------------ ++ <1> repeat as needed. <2> extract patches from your branch for e-mail submission. <3> "pull" fetches from "origin" by default and merges into the @@ -221,7 +222,6 @@ area we are interested in. <7> garbage collect leftover objects from reverted pull. <8> from time to time, obtain official tags from the "origin" and store them under .git/refs/tags/. ------------- Push into another repository.:: @@ -239,7 +239,8 @@ satellite$ git push origin <4> mothership$ cd frotz mothership$ git checkout master mothership$ git pull . satellite <5> - +------------ ++ <1> mothership machine has a frotz repository under your home directory; clone from it to start a repository on the satellite machine. @@ -252,7 +253,6 @@ to local "origin" branch. mothership machine. You could use this as a back-up method. <5> on mothership machine, merge the work done on the satellite machine into the master branch. ------------- Branch off of a specific tag.:: + @@ -262,12 +262,12 @@ $ edit/compile/test; git commit -a $ git checkout master $ git format-patch -k -m --stdout v2.6.14..private2.6.14 | git am -3 -k <2> - +------------ ++ <1> create a private branch based on a well known (but somewhat behind) tag. <2> forward port all changes in private2.6.14 branch to master branch without a formal "merging". ------------- Integrator[[Integrator]] @@ -317,7 +317,8 @@ $ git tag -s -m 'GIT 0.99.9x' v0.99.9x <10> $ git fetch ko && git show-branch master maint 'tags/ko-*' <11> $ git push ko <12> $ git push ko v0.99.9x <13> - +------------ ++ <1> see what I was in the middle of doing, if any. <2> see what topic branches I have and think about how ready they are. @@ -346,7 +347,6 @@ In the output from "git show-branch", "master" should have everything "ko-master" has. <12> push out the bleeding edge. <13> push the tag out, too. ------------- Repository Administration[[Repository Administration]] @@ -367,7 +367,6 @@ example of managing a shared central repository. Examples ~~~~~~~~ - Run git-daemon to serve /pub/scm from inetd.:: + ------------ @@ -388,13 +387,13 @@ cindy:x:1002:1002::/home/cindy:/usr/bin/git-shell david:x:1003:1003::/home/david:/usr/bin/git-shell $ grep git /etc/shells <2> /usr/bin/git-shell - +------------ ++ <1> log-in shell is set to /usr/bin/git-shell, which does not allow anything but "git push" and "git pull". The users should get an ssh access to the machine. <2> in many distributions /etc/shells needs to list what is used as the login shell. ------------- CVS-style shared repository.:: + @@ -419,7 +418,8 @@ $ cat info/allowed-users <4> refs/heads/master alice\|cindy refs/heads/doc-update bob refs/tags/v[0-9]* david - +------------ ++ <1> place the developers into the same git group. <2> and make the shared repository writable by the group. <3> use update-hook example by Carl from Documentation/howto/ @@ -427,7 +427,6 @@ for branch policy control. <4> alice and cindy can push into master, only bob can push into doc-update. david is the release manager and is the only person who can create and push version tags. ------------- HTTP server to support dumb protocol transfer.:: + @@ -435,7 +434,7 @@ HTTP server to support dumb protocol transfer.:: dev$ git update-server-info <1> dev$ ftp user@isp.example.com <2> ftp> cp -r .git /home/user/myproject.git - +------------ ++ <1> make sure your info/refs and objects/info/packs are up-to-date <2> upload to public HTTP server hosted by your ISP. ------------- diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 985bb2f827..095128906a 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -66,19 +66,19 @@ the `Makefile` to two revisions back, deletes hello.c by mistake, and gets it back from the index. + ------------ -$ git checkout master <1> -$ git checkout master~2 Makefile <2> +$ git checkout master <1> +$ git checkout master~2 Makefile <2> $ rm -f hello.c -$ git checkout hello.c <3> - +$ git checkout hello.c <3> +------------ ++ <1> switch branch <2> take out a file out of other commit -<3> or "git checkout -- hello.c", as in the next example. ------------- +<3> restore hello.c from HEAD of current branch + -If you have an unfortunate branch that is named `hello.c`, the -last step above would be confused as an instruction to switch to -that branch. You should instead write: +If you have an unfortunate branch that is named `hello.c`, this +step would be confused as an instruction to switch to that branch. +You should instead write: + ------------ $ git checkout -- hello.c diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 890931c891..7267bcd7a0 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -46,40 +46,41 @@ EXAMPLES Various ways to check your working tree:: + ------------ -$ git diff <1> -$ git diff --cached <2> -$ git diff HEAD <3> - +$ git diff <1> +$ git diff --cached <2> +$ git diff HEAD <3> +------------ ++ <1> changes in the working tree since your last git-update-index. <2> changes between the index and your last commit; what you would be committing if you run "git commit" without "-a" option. <3> changes in the working tree since your last commit; what you would be committing if you run "git commit -a" ------------- Comparing with arbitrary commits:: + ------------ -$ git diff test <1> -$ git diff HEAD -- ./test <2> -$ git diff HEAD^ HEAD <3> - +$ git diff test <1> +$ git diff HEAD -- ./test <2> +$ git diff HEAD^ HEAD <3> +------------ ++ <1> instead of using the tip of the current branch, compare with the tip of "test" branch. <2> instead of comparing with the tip of "test" branch, compare with the tip of the current branch, but limit the comparison to the file "test". <3> compare the version before the last commit and the last commit. ------------- Limiting the diff output:: + ------------ -$ git diff --diff-filter=MRC <1> -$ git diff --name-status -r <2> -$ git diff arch/i386 include/asm-i386 <3> - +$ git diff --diff-filter=MRC <1> +$ git diff --name-status -r <2> +$ git diff arch/i386 include/asm-i386 <3> +------------ ++ <1> show only modification, rename and copy, but not addition nor deletion. <2> show only names and the nature of change, but not actual @@ -88,18 +89,17 @@ which in turn also disables recursive behaviour, so without -r you would only see the directory name if there is a change in a file in a subdirectory. <3> limit diff output to named subtrees. ------------- Munging the diff output:: + ------------ -$ git diff --find-copies-harder -B -C <1> -$ git diff -R <2> - +$ git diff --find-copies-harder -B -C <1> +$ git diff -R <2> +------------ ++ <1> spend extra cycles to find renames, copies and complete rewrites (very expensive). <2> output diff in reverse. ------------- Author diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt index aeb1115af9..8a150d861f 100644 --- a/Documentation/git-init-db.txt +++ b/Documentation/git-init-db.txt @@ -60,12 +60,12 @@ Start a new git repository for an existing code base:: + ---------------- $ cd /path/to/my/codebase -$ git-init-db <1> -$ git-add . <2> - +$ git-init-db <1> +$ git-add . <2> +---------------- ++ <1> prepare /path/to/my/codebase/.git directory <2> add all existing file to the index ----------------- Author diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index b7b9798bf9..ebcfe5edb7 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -49,10 +49,11 @@ Undo a commit and redo:: + ------------ $ git commit ... -$ git reset --soft HEAD^ <1> -$ edit <2> -$ git commit -a -c ORIG_HEAD <3> - +$ git reset --soft HEAD^ <1> +$ edit <2> +$ git commit -a -c ORIG_HEAD <3> +------------ ++ <1> This is most often done when you remembered what you just committed is incomplete, or you misspelled your commit message, or both. Leaves working tree as it was before "reset". @@ -60,43 +61,43 @@ message, or both. Leaves working tree as it was before "reset". <3> "reset" copies the old head to .git/ORIG_HEAD; redo the commit by starting with its log message. If you do not need to edit the message further, you can give -C option instead. ------------- Undo commits permanently:: + ------------ $ git commit ... -$ git reset --hard HEAD~3 <1> - +$ git reset --hard HEAD~3 <1> +------------ ++ <1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad and you do not want to ever see them again. Do *not* do this if you have already given these commits to somebody else. ------------- Undo a commit, making it a topic branch:: + ------------ -$ git branch topic/wip <1> -$ git reset --hard HEAD~3 <2> -$ git checkout topic/wip <3> - +$ git branch topic/wip <1> +$ git reset --hard HEAD~3 <2> +$ git checkout topic/wip <3> +------------ ++ <1> You have made some commits, but realize they were premature to be in the "master" branch. You want to continue polishing them in a topic branch, so create "topic/wip" branch off of the current HEAD. <2> Rewind the master branch to get rid of those three commits. <3> Switch to "topic/wip" branch and keep working. ------------- Undo update-index:: + ------------ -$ edit <1> +$ edit <1> $ git-update-index frotz.c filfre.c -$ mailx <2> -$ git reset <3> -$ git pull git://info.example.com/ nitfol <4> - +$ mailx <2> +$ git reset <3> +$ git pull git://info.example.com/ nitfol <4> +------------ ++ <1> you are happily working on something, and find the changes in these files are in good order. You do not want to see them when you run "git diff", because you plan to work on other files @@ -109,12 +110,11 @@ index changes for these two files. Your changes in working tree remain there. <4> then you can pull and merge, leaving frotz.c and filfre.c changes still in the working tree. ------------- Undo a merge or pull:: + ------------ -$ git pull <1> +$ git pull <1> Trying really trivial in-index merge... fatal: Merge requires file-level merging Nope. @@ -122,20 +122,19 @@ Nope. Auto-merging nitfol CONFLICT (content): Merge conflict in nitfol Automatic merge failed/prevented; fix up by hand -$ git reset --hard <2> - +$ git reset --hard <2> +$ git pull . topic/branch <3> +Updating from 41223... to 13134... +Fast forward +$ git reset --hard ORIG_HEAD <4> +------------ ++ <1> try to update from the upstream resulted in a lot of conflicts; you were not ready to spend a lot of time merging right now, so you decide to do that later. <2> "pull" has not made merge commit, so "git reset --hard" which is a synonym for "git reset --hard HEAD" clears the mess from the index file and the working tree. - -$ git pull . topic/branch <3> -Updating from 41223... to 13134... -Fast forward -$ git reset --hard ORIG_HEAD <4> - <3> merge a topic branch into the current branch, which resulted in a fast forward. <4> but you decided that the topic branch is not ready for public @@ -143,7 +142,6 @@ consumption yet. "pull" or "merge" always leaves the original tip of the current branch in ORIG_HEAD, so resetting hard to it brings your index file and the working tree back to that state, and resets the tip of the branch to that commit. ------------- Interrupted workflow:: + @@ -155,21 +153,21 @@ need to get to the other branch for a quick bugfix. ------------ $ git checkout feature ;# you were working in "feature" branch and $ work work work ;# got interrupted -$ git commit -a -m 'snapshot WIP' <1> +$ git commit -a -m 'snapshot WIP' <1> $ git checkout master $ fix fix fix $ git commit ;# commit with real log $ git checkout feature -$ git reset --soft HEAD^ ;# go back to WIP state <2> -$ git reset <3> - +$ git reset --soft HEAD^ ;# go back to WIP state <2> +$ git reset <3> +------------ ++ <1> This commit will get blown away so a throw-away log message is OK. <2> This removes the 'WIP' commit from the commit history, and sets your working tree to the state just before you made that snapshot. -<3> After <2>, the index file still has all the WIP changes you - committed in <1>. This sets it to the last commit you were - basing the WIP changes on. ------------- +<3> At this point the index file still has all the WIP changes you + committed as 'snapshot WIP'. This updates the index to show your + WIP files as uncommitted. Author ------ diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 0a1b0ad56d..d4137fc87e 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -247,34 +247,33 @@ To update and refresh only the files already checked out: $ git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh ---------------- -On an inefficient filesystem with `core.ignorestat` set: - +On an inefficient filesystem with `core.ignorestat` set:: ++ ------------ -$ git update-index --really-refresh <1> -$ git update-index --no-assume-unchanged foo.c <2> -$ git diff --name-only <3> +$ git update-index --really-refresh <1> +$ git update-index --no-assume-unchanged foo.c <2> +$ git diff --name-only <3> $ edit foo.c -$ git diff --name-only <4> +$ git diff --name-only <4> M foo.c -$ git update-index foo.c <5> -$ git diff --name-only <6> +$ git update-index foo.c <5> +$ git diff --name-only <6> $ edit foo.c -$ git diff --name-only <7> -$ git update-index --no-assume-unchanged foo.c <8> -$ git diff --name-only <9> +$ git diff --name-only <7> +$ git update-index --no-assume-unchanged foo.c <8> +$ git diff --name-only <9> M foo.c - -<1> forces lstat(2) to set "assume unchanged" bits for paths - that match index. +------------ ++ +<1> forces lstat(2) to set "assume unchanged" bits for paths that match index. <2> mark the path to be edited. <3> this does lstat(2) and finds index matches the path. -<4> this does lstat(2) and finds index does not match the path. +<4> this does lstat(2) and finds index does *not* match the path. <5> registering the new version to index sets "assume unchanged" bit. <6> and it is assumed unchanged. <7> even after you edit it. <8> you can tell about the change after the fact. <9> now it checks with lstat(2) and finds it has been changed. ------------- Configuration -- cgit v1.2.3 From 776e994af5b85d77424581bda37fb615897063cc Mon Sep 17 00:00:00 2001 From: Sean Estabrooks Date: Fri, 28 Apr 2006 09:15:06 -0400 Subject: Properly render asciidoc "callouts" in git man pages. Adds an xsl fragment to render docbook callouts when converting to man page format. Update the Makefile to have "xmlto" use it when generating man pages. Signed-off-by: Sean Estabrooks --- Documentation/Makefile | 2 +- Documentation/callouts.xsl | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) create mode 100644 Documentation/callouts.xsl diff --git a/Documentation/Makefile b/Documentation/Makefile index f4cbf7e159..c1af22ce04 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -79,7 +79,7 @@ clean: asciidoc -b xhtml11 -d manpage -f asciidoc.conf $< %.1 %.7 : %.xml - xmlto man $< + xmlto -m callouts.xsl man $< %.xml : %.txt asciidoc -b docbook -d manpage -f asciidoc.conf $< diff --git a/Documentation/callouts.xsl b/Documentation/callouts.xsl new file mode 100644 index 0000000000..ad03755d8f --- /dev/null +++ b/Documentation/callouts.xsl @@ -0,0 +1,16 @@ + + + + + + + .sp + + + + + + + .br + + -- cgit v1.2.3 From aa6bf0eb6489d652c5877d65160ed33c857afa74 Mon Sep 17 00:00:00 2001 From: Sean Estabrooks Date: Fri, 28 Apr 2006 09:15:03 -0400 Subject: Fix trivial typo in git-log man page. Signed-off-by: Sean Estabrooks --- Documentation/git-log.txt | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 76cb894caa..af378ffcf9 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -14,13 +14,12 @@ DESCRIPTION ----------- Shows the commit logs. -The command takes options applicable to the gitlink::git-rev-list[1] +The command takes options applicable to the gitlink:git-rev-list[1] command to control what is shown and how, and options applicable to -the gitlink::git-diff-tree[1] commands to control how the change +the gitlink:git-diff-tree[1] commands to control how the change each commit introduces are shown. -This manual page describes only the most frequently used -options. +This manual page describes only the most frequently used options. OPTIONS -- cgit v1.2.3