| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Because the default Myers, patience and histogram algorithms cannot be in
effect at the same time, XDL_PATIENCE_DIFF and XDL_HISTOGRAM_DIFF are not
independent bits. Instead of wasting one bit per algorithm, define a few
macros to access the few bits they occupy and update the code that access
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/diff-cleanup-records-fix:
diff: resurrect XDF_NEED_MINIMAL with --minimal
Revert removal of multi-match discard heuristic in 27af01
|
|
27af01d (xdiff/xprepare: improve O(n*m) performance in
xdl_cleanup_records(), 2011-08-17) was supposed to be a performance
boost only. However, it unexpectedly changed the behaviour of diff.
Revert a part of 27af01d that removes logic that mark lines as
"multi-match" (ie. dis[i] == 2). This was preventing the multi-match
discard heuristic (performed in xdl_cleanup_records() and
xdl_clean_mmatch()) from executing.
Reported-by: Alexander Pepper <pepper@inf.fu-berlin.de>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rc/histogram-diff:
xdiff/xprepare: initialise xdlclassifier_t cf in xdl_prepare_env()
|
|
Ensure that the xdl_free_classifier() call on xdlclassifier_t cf is safe
even if xdl_init_classifier() isn't called. This may occur in the case
where diff is run with --histogram and a call to, say, xdl_prepare_ctx()
fails.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rc/histogram-diff:
xdiff/xhistogram: drop need for additional variable
xdiff/xhistogram: rely on xdl_trim_ends()
xdiff/xhistogram: rework handling of recursed results
xdiff: do away with xdl_mmfile_next()
Make test number unique
xdiff/xprepare: use a smaller sample size for histogram diff
xdiff/xprepare: skip classification
teach --histogram to diff
t4033-diff-patience: factor out tests
xdiff/xpatience: factor out fall-back-diff function
xdiff/xprepare: refactor abort cleanups
xdiff/xprepare: use memset()
Conflicts:
xdiff/xprepare.c
|
|
In xdl_cleanup_records(), we see O(n*m) performance, where n is the
number of records from xdf->dstart to xdf->dend, and m is the size of a
bucket in xdf->rhash (<= by mlim).
Here, we improve this to O(n) by pre-computing nm (in rcrec->len(1|2))
in xdl_classify_record().
Reported-by: Marat Radchenko <marat@slonopotamus.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given our simple mmfile structure, xdl_mmfile_next() calls are
redundant. Do away with calls to them.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For histogram diff, we can afford a smaller sample size and thus a
poorer estimate of the number of lines, as the hash table (rhash) won't
be filled up/grown. This is safe as the final count of lines (xdf.nrecs)
will be updated correctly anyway by xdl_prepare_ctx().
This gives us a small boost in performance.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xdiff performs "classification" of records (xdl_classify_record()),
replacing hashes (xrecord_t.ha) with a unique identifier of the
record/line and building a hash table (xrecord_t.rhash) of records. This
is then used to "cleanup" records (xdl_cleanup_records()).
We don't need any of that in histogram diff, so we omit calls to these
functions. We also skip allocating memory to the hash table, rhash, as
it is no longer used.
This gives us a small boost in performance.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Group free()'s that are called when a malloc() fails in
xdl_prepare_ctx(), making for more readable code.
Also add a free() on ha, in case future git hackers add allocs after the
ha malloc.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use memset() instead of a for loop to initialize. This could give a
performance advantage.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The patience diff algorithm produces slightly more intuitive output
than the classic Myers algorithm, as it does not try to minimize the
number of +/- lines first, but tries to preserve the lines that are
unique.
To this end, it first determines lines that are unique in both files,
then the maximal sequence which preserves the order (relative to both
files) is extracted.
Starting from this initial set of common lines, the rest of the lines
is handled recursively, with Myers' algorithm as a fallback when
the patience algorithm fails (due to no common unique lines).
This patch includes memory leak fixes by Pierre Habouzit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a corner case of large files whose lines do not match uniquely, the
loop to eliminate a line that matches multiple locations adjacent to a run
of lines that do not uniquely match wasted too much cycles. Fix this by
giving up early after scanning 100 lines in both direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds -b (--ignore-space-change) and -w (--ignore-all-space) flags to
diff. The main part of the patch is teaching libxdiff about it.
[jc: renamed xdl_line_match() to xdl_recmatch() since the former is used
for different purposes in xpatchi.c which is in the parts of the upstream
source we do not use.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also corrects the line numbers in unified output when using
zero lines context.
|
|
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
René Scharfe
Tay Ray Chuan
Johannes Schindelin
Davide Libenzi
Linus Torvalds