| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jc/conflict-marker-size:
rerere: honor conflict-marker-size attribute
rerere: prepare for customizable conflict marker length
conflict-marker-size: new attribute
rerere: use ll_merge() instead of using xdl_merge()
merge-tree: use ll_merge() not xdl_merge()
xdl_merge(): allow passing down marker_size in xmparam_t
xdl_merge(): introduce xmparam_t for merge specific parameters
git_attr(): fix function signature
Conflicts:
builtin-merge-file.c
ll-merge.c
xdiff/xdiff.h
xdiff/xmerge.c
|
|
This allows the callers of xdl_merge() to pass marker_size (defaults to 7)
in xmparam_t argument, to use conflict markers of non-default length.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far we have only needed to be able to pass an option that is generic to
xdiff family of functions to this function. Extend the interface so that
we can give it merge specific parameters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes people want their conflicting merges autoresolved by
favouring upstream changes. The standard answer they are given is
to run "git diff --name-only | xargs git checkout MERGE_HEAD --" in
such a case. This is to accept automerge results for the paths that
are fully resolved automatically, while taking their version of the
file in full for paths that have conflicts.
This is problematic on two counts.
One is that this is not exactly what these people want. It discards
all changes they did on their branch for any paths that conflicted.
They usually want to salvage as much automerge result as possible in
a conflicted file, and want to take the upstream change only in the
conflicted part.
This patch teaches two new modes of operation to the lowest-lever
merge machinery, xdl_merge(). Instead of leaving the conflicted
lines from both sides enclosed in <<<, ===, and >>> markers, the
conflicts are resolved favouring our side or their side of changes.
A larger problem is that this tends to encourage a bad workflow by
allowing people to record such a mixed up half-merged result as a
full commit without auditing. This commit does not tackle this
issue at all. In git, we usually give long enough rope to users
with strange wishes as long as the risky features are not enabled by
default, and this is such a risky feature.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/maint-1.6.0-xdl-merge-fix:
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
Conflicts:
xdiff/xmerge.c
|
|
xdl_merge used to have a check to ensure that there was at least
some change in one or other side being merged but this suppressed
output for the degenerate case when base, local and remote
contents were all identical.
Removing this check enables correct output in the degenerate case
and xdl_free_script handles freeing NULL scripts so there is no
need to have the check for these calls.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When showing a conflicting merge result, and "--diff3 -m" style is asked
for, this patch makes sure that the merge reduction level does not exceed
XDL_MERGE_EAGER. This is because "diff3 -m" style output would not make
sense for anything more aggressive than XDL_MERGE_EAGER, because of the
way how the merge reduction works.
"git merge-file" no longer has to force MERGE_EAGER when "--diff3" is
asked for because of this change.
Suppose a common ancestor (shared preimage) is modified to postimage #1
and #2 (each letter represents one line):
#####
postimage#1: 1234ABCDE789
| /
| /
preimage: 123456789
| \
postimage#2: 1234AXYE789
####
XDL_MERGE_MINIMAL and XDL_MERGE_EAGER would:
(1) find the s/56/ABCDE/ done on one side and s/56/AXYE/ done on the
other side,
(2) notice that they touch an overlapping area, and
(3) mark it as a conflict, "ABCDE vs AXYE".
The difference between the two algorithms is that EAGER drops the hunk
altogether if the postimages match (i.e. both sides modified the same
way), while MINIMAL keeps it. There is no other operation performed to
the hunk. As the result, lines marked with "#" in the above picure will
be in the RCS merge style output like this (letters <, = and > represent
conflict marker lines):
output: 1234<ABCDE=AXYE>789 ; with MINIMAL/EAGER
The part from the preimage that corresponds to these conflicting changes
is "56", which is what "diff3 -m" style output adds to it:
output: 1234<ABCDE|56=AXYE>789 ; in "diff3 -m" style
Now, XDL_MERGE_ZEALOUS looks at the differences between the changes two
postimages made in order to reduce the number of lines in the conflicting
regions. It notices that both sides start their new contents with "A",
and excludes it from the output (it also excludes "E" for the same
reason). The conflict that used to be "ABCDE vs AXYE" is now "BCD vs XY":
output: 1234A<BCD=XY>E789 ; with ZEALOUS
There could even be matching parts between two postimages in the middle.
Instead of one side rewriting the shared "56" to "ABCDE" and the other
side to "AXYE", imagine the case where the postimages are "ABCDE" and
"AXCYE", in which case instead of having one conflicted hunk "BCD vs XY",
you would have two conflicting hunks "B vs X" and "D vs Y".
In either case, once you reduce "ABCDE vs AXYE" to "BCD vs XY" (or "ABCDE
vs AXCYE" to "B vs X" and "D vs Y"), there is no part from the preimage
that corresponds to the conflicting change made in both postimages
anymore. In other words, conflict reduced by ZEALOUS algorithm cannot be
expressed in "diff3 -m" style. Representing the last illustration like
this is misleading to say the least:
output: 1234A<BCD|56=XY>E789 ; broken "diff3 -m" style
because the preimage was not ...4A56E... to begin with. "A" and "E" are
common only between the postimages.
Even worse, once a single conflicting hunk is split into multiple ones
(recall the example of breaking "ABCDE vs AXCYE" to "B vs X" and "D vs
Y"), there is no sane way to distribute the preimage text across split
conflicting hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces hardcoded magic constants with symbolic ones for
readability, and swaps one if/else blocks to better match the
order in which 0/1/2 variables are handled to nearby codepath.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When showing conflicting merges, we traditionally followed RCS's merge
output format. The output shows:
<<<<<<<
postimage from one side;
=======
postimage of the other side; and
>>>>>>>
Some poeple find it easier to be able to understand what is going on when
they can view the common ancestor's version, which is used by "diff3 -m",
which shows:
<<<<<<<
postimage from one side;
|||||||
shared preimage;
=======
postimage of the other side; and
>>>>>>>
This is an initial step to bring that as an optional feature to git.
Only "git merge-file" has been converted, with "--diff3" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This simply moves code around to make a separate function that prepares
a single conflicted hunk with markers into the buffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a merge conflicts, there are often common lines that are not really
common, such as empty lines or lines containing a single curly bracket.
With XDL_MERGE_ZEALOUS_ALNUM, we use the following heuristics: when a
hunk does not contain any letters or digits, it is treated as conflicting.
In other words, a conflict which used to look like this:
<<<<<<<
a = 1;
=======
output();
>>>>>>>
}
}
}
<<<<<<<
output();
=======
b = 1;
>>>>>>>
will look like this with ZEALOUS_ALNUM:
<<<<<<<
a = 1;
}
}
}
output();
=======
output();
}
}
}
b = 1;
>>>>>>>
To demonstrate this, git-merge-file has been switched from
XDL_MERGE_ZEALOUS to XDL_MERGE_ZEALOUS_ALNUM.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a merge conflicts, there are often less than three common lines
between two conflicting regions.
Since a conflict takes up as many lines as are conflicting, plus three
lines for the commit markers, the output will be shorter (and thus,
simpler) in this case, if the common lines will be merged into the
conflicting regions.
This patch merges up to three common lines into the conflicts.
For example, what looked like this before this patch:
<<<<<<<
if (a == 1)
=======
if (a != 0)
>>>>>>>
{
int i;
<<<<<<<
a = 0;
=======
a = !a;
>>>>>>>
will now look like this:
<<<<<<<
if (a == 1)
{
int i;
a = 0;
=======
if (a != 0)
{
int i;
a = !a;
>>>>>>>
Suggested Linus (based on ideas by "Voltage Spike" -- if that name is
real, it is mighty cool).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In very obscure cases, a merge can hit an unexpected code path (where the
original code went as far as saying that this was a bug). This failing
merge was noticed by Alexandre Juillard.
The problem is that the original file contains something like this:
-- snip --
two non-empty lines
before two empty lines
after two empty lines
-- snap --
and this snippet is reduced to _one_ empty line in _both_ new files.
However, it is ambiguous as to which hunk takes the empty line: the first
or the second one?
Indeed in Alexandre's example files, the xdiff algorithm attributes the
empty line to the first hunk in one case, and to the second hunk in the
other case.
(Trimming down the example files _changes_ that behaviour!)
Thus, the call to xdl_merge_cmp_lines() has no chance to realize that the
change is actually identical in both new files. Therefore,
xdl_refine_conflicts() finds an empty diff script, which was not expected
there, because (the original author of xdl_merge() thought)
xdl_merge_cmp_lines() would catch that case earlier.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The function xdl_refine_conflicts() tries to break down huge
conflicts by doing a diff on the conflicting regions. However,
this does not make sense when one side is empty.
Worse, when one side is not only empty, but after EOF, the code
accessed unmapped memory.
Noticed by Luben Tuikov, Shawn Pearce and Alexandre Julliard, the
latter providing a test case.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Suppose you have changes in new1 to the original lines 10-20,
and changes in new2 to the original lines 15-25, then the
changes to 10-25 conflict. But it is possible that the next
changes in new1 still overlap with this change to new2.
So, in the next iteration we have to look at the same change
to new2 again.
The old code tried to be a bit too clever. The new code is
shorter and more to the point: do not fiddle with the ranges
at all.
Also, xdl_append_merge() tries harder to combine conflicts.
This is necessary, because with the above simplification,
some conflicts would not be recognized as conflicts otherwise:
In the above scenario, it is possible that there is no other
change to new1. Absent the combine logic, the change in new2
would be recorded _again_, but as a non-conflict.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
|
|
If one side's block (of changed lines) ends later than the other
side's block, the former should be tested against the next block
of the other side, not vice versa.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The line range is i1 .. (i1 + chg1 - 1), not i1 .. (i1 + chg1).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The callers would want to know if the resulting merge is clean;
do not discard that information away after calling xdl_do_merge().
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This new function implements the functionality of RCS merge, but
in-memory. It returns < 0 on error, otherwise the number of conflicts.
Finding the conflicting lines can be a very expensive task. You can
control the eagerness of this algorithm:
- a level value of 0 means that all overlapping changes are treated
as conflicts,
- a value of 1 means that if the overlapping changes are identical,
it is not treated as a conflict.
- If you set level to 2, overlapping changes will be analyzed, so that
almost identical changes will not result in huge conflicts. Rather,
only the conflicting lines will be shown inside conflict markers.
With each increasing level, the algorithm gets slower, but more accurate.
Note that the code for level 2 depends on the simple definition of
mmfile_t specific to git, and therefore it will be harder to port that
to LibXDiff.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Charles Bailey
Johannes Schindelin
Junio C Hamano