summaryrefslogtreecommitdiff
path: root/xdiff/xdiffi.c
AgeCommit message (Collapse)AuthorFilesLines
2019-10-09xdiffi: fix typos and touch up commentsLibravatar Johannes Schindelin1-44/+55
Inspired by the thoroughly stale https://github.com/git/git/pull/159, this patch fixes a couple of typos, rewraps and clarifies some comments. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-17Merge branch 'sb/indent-heuristic-optim'Libravatar Junio C Hamano1-1/+11
"git diff --indent-heuristic" had a bad corner case performance. * sb/indent-heuristic-optim: xdiff: reduce indent heuristic overhead
2018-08-01xdiff: reduce indent heuristic overheadLibravatar Stefan Beller1-1/+11
Skip searching for better indentation heuristics if we'd slide a hunk more than its size. This is the easiest fix proposed in the analysis[1] in response to a patch that mercurial took for xdiff to limit searching by a constant. Using a performance test as: #!python open('a', 'w').write(" \n" * 1000000) open('b', 'w').write(" \n" * 1000001) This patch reduces the execution of "git diff --no-index a b" from 0.70s to 0.31s. However limiting the sliding to the size of the diff hunk, which was proposed as a solution (that I found easiest to implement for now) is not optimal for cases like open('a', 'w').write(" \n" * 1000000) open('b', 'w').write(" \n" * 2000000) as then we'd still slide 1000000 times. In addition to limiting the sliding to size of the hunk, also limit by a constant. Choose 100 lines as the constant as that fits more than a screen, which really means that the diff sliding is probably not providing a lot of benefit anyway. [1] https://public-inbox.org/git/72ac1ac2-f567-f241-41d6-d0f83072e0b3@alum.mit.edu/ Reported-by: Jun Wu <quark@fb.com> Analysis-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17xdiff/xdiffi.c: remove unneeded function declarationsLibravatar Stefan Beller1-17/+0
There is no need to forward-declare these functions, as they are used after their implementation only. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-09Replace Free Software Foundation address in license noticesLibravatar Todd Zullinger1-2/+2
The mailing address for the FSF has changed over the years. Rather than updating the address across all files, refer readers to gnu.org, as the GNU GPL documentation now suggests for license notices. The mailing address is retained in the full license files (COPYING and LGPL-2.1). The old address is still present in t/diff-lib/COPYING. This is intentional, as the file is used in tests and the contents are not expected to change. Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-23diff: retire "compaction" heuristicsLibravatar Junio C Hamano1-33/+0
When a patch inserts a block of lines, whose last lines are the same as the existing lines that appear before the inserted block, "git diff" can choose any place between these existing lines as the boundary between the pre-context and the added lines (adjusting the end of the inserted block as appropriate) to come up with variants of the same patch, and some variants are easier to read than others. We have been trying to improve the choice of this boundary, and Git 2.11 shipped with an experimental "compaction-heuristic". Since then another attempt to improve the logic further resulted in a new "indent-heuristic" logic. It is agreed that the latter gives better result overall, and the former outlived its usefulness. Retire "compaction", and keep "indent" as an experimental feature. The latter hopefully will be turned on by default in a future release, but that should be done as a separate step. Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-27xdiff: rename "struct group" to "struct xdlgroup"Libravatar Jeff King1-7/+7
Commit e8adf23 (xdl_change_compact(): introduce the concept of a change group, 2016-08-22) added a "struct group" type to xdiff/xdiffi.c. But the POSIX system header "grp.h" already defines "struct group" (it is part of the getgrnam interface). This happens to work because the new type is local to xdiffi.c, and the xdiff code includes a relatively small set of system headers. But it will break compilation if xdiff ever switches to using git-compat-util.h. It can also probably cause confusion with tools that look at the whole code base, like coccinelle or ctags. Let's resolve by giving the xdiff variant a scoped name, which is closer to other xdiff types anyway (e.g., xdlfile_t, though note that xdiff is fond if typedefs when Git usually is not). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-19diff: improve positioning of add/delete blocks in diffsLibravatar Michael Haggerty1-0/+325
Some groups of added/deleted lines in diffs can be slid up or down, because lines at the edges of the group are not unique. Picking good shifts for such groups is not a matter of correctness but definitely has a big effect on aesthetics. For example, consider the following two diffs. The first is what standard Git emits: --- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl +++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl @@ -231,6 +231,9 @@ if (!defined $initial_reply_to && $prompting) { } if (!$smtp_server) { + $smtp_server = $repo->config('sendemail.smtpserver'); +} +if (!$smtp_server) { foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) { if (-x $_) { $smtp_server = $_; The following diff is equivalent, but is obviously preferable from an aesthetic point of view: --- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl +++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl @@ -230,6 +230,9 @@ if (!defined $initial_reply_to && $prompting) { $initial_reply_to =~ s/(^\s+|\s+$)//g; } +if (!$smtp_server) { + $smtp_server = $repo->config('sendemail.smtpserver'); +} if (!$smtp_server) { foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) { if (-x $_) { This patch teaches Git to pick better positions for such "diff sliders" using heuristics that take the positions of nearby blank lines and the indentation of nearby lines into account. The existing Git code basically always shifts such "sliders" as far down in the file as possible. The only exception is when the slider can be aligned with a group of changed lines in the other file, in which case Git favors depicting the change as one add+delete block rather than one add and a slightly offset delete block. This naive algorithm often yields ugly diffs. Commit d634d61ed6 improved the situation somewhat by preferring to position add/delete groups to make their last line a blank line, when that is possible. This heuristic does more good than harm, but (1) it can only help if there are blank lines in the right places, and (2) always picks the last blank line, even if there are others that might be better. The end result is that it makes perhaps 1/3 as many errors as the default Git algorithm, but that still leaves a lot of ugly diffs. This commit implements a new and much better heuristic for picking optimal "slider" positions using the following approach: First observe that each hypothetical positioning of a diff slider introduces two splits: one between the context lines preceding the group and the first added/deleted line, and the other between the last added/deleted line and the first line of context following it. It tries to find the positioning that creates the least bad splits. Splits are evaluated based only on the presence and locations of nearby blank lines, and the indentation of lines near the split. Basically, it prefers to introduce splits adjacent to blank lines, between lines that are indented less, and between lines with the same level of indentation. In more detail: 1. It measures the following characteristics of a proposed splitting position in a `struct split_measurement`: * the number of blank lines above the proposed split * whether the line directly after the split is blank * the number of blank lines following that line * the indentation of the nearest non-blank line above the split * the indentation of the line directly below the split * the indentation of the nearest non-blank line after that line 2. It combines the measured attributes using a bunch of empirically-optimized weighting factors to derive a `struct split_score` that measures the "badness" of splitting the text at that position. 3. It combines the `split_score` for the top and the bottom of the slider at each of its possible positions, and selects the position that has the best `split_score`. I determined the initial set of weighting factors by collecting a corpus of Git histories from 29 open-source software projects in various programming languages. I generated many diffs from this corpus, and determined the best positioning "by eye" for about 6600 diff sliders. I used about half of the repositories in the corpus (corresponding to about 2/3 of the sliders) as a training set, and optimized the weights against this corpus using a crude automated search of the parameter space to get the best agreement with the manually-determined values. Then I tested the resulting heuristic against the full corpus. The results are summarized in the following table, in column `indent-1`: | repository | count | Git 2.9.0 | compaction | compaction-fixed | indent-1 | indent-2 | | --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- | | afnetworking | 109 | 89 (81.7%) | 37 (33.9%) | 37 (33.9%) | 2 (1.8%) | 2 (1.8%) | | alamofire | 30 | 18 (60.0%) | 14 (46.7%) | 15 (50.0%) | 0 (0.0%) | 0 (0.0%) | | angular | 184 | 127 (69.0%) | 39 (21.2%) | 23 (12.5%) | 5 (2.7%) | 5 (2.7%) | | animate | 313 | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | | ant | 380 | 356 (93.7%) | 152 (40.0%) | 148 (38.9%) | 15 (3.9%) | 15 (3.9%) | * | bugzilla | 306 | 263 (85.9%) | 109 (35.6%) | 99 (32.4%) | 14 (4.6%) | 15 (4.9%) | * | corefx | 126 | 91 (72.2%) | 22 (17.5%) | 21 (16.7%) | 6 (4.8%) | 6 (4.8%) | | couchdb | 78 | 44 (56.4%) | 26 (33.3%) | 28 (35.9%) | 6 (7.7%) | 6 (7.7%) | * | cpython | 937 | 158 (16.9%) | 50 (5.3%) | 49 (5.2%) | 5 (0.5%) | 5 (0.5%) | * | discourse | 160 | 95 (59.4%) | 42 (26.2%) | 36 (22.5%) | 18 (11.2%) | 13 (8.1%) | | docker | 307 | 194 (63.2%) | 198 (64.5%) | 253 (82.4%) | 8 (2.6%) | 8 (2.6%) | * | electron | 163 | 132 (81.0%) | 38 (23.3%) | 39 (23.9%) | 6 (3.7%) | 6 (3.7%) | | git | 536 | 470 (87.7%) | 73 (13.6%) | 78 (14.6%) | 16 (3.0%) | 16 (3.0%) | * | gitflow | 127 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | | ionic | 133 | 89 (66.9%) | 29 (21.8%) | 38 (28.6%) | 1 (0.8%) | 1 (0.8%) | | ipython | 482 | 362 (75.1%) | 167 (34.6%) | 169 (35.1%) | 11 (2.3%) | 11 (2.3%) | * | junit | 161 | 147 (91.3%) | 67 (41.6%) | 66 (41.0%) | 1 (0.6%) | 1 (0.6%) | * | lighttable | 15 | 5 (33.3%) | 0 (0.0%) | 2 (13.3%) | 0 (0.0%) | 0 (0.0%) | | magit | 88 | 75 (85.2%) | 11 (12.5%) | 9 (10.2%) | 1 (1.1%) | 0 (0.0%) | | neural-style | 28 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | | nodejs | 781 | 649 (83.1%) | 118 (15.1%) | 111 (14.2%) | 4 (0.5%) | 5 (0.6%) | * | phpmyadmin | 491 | 481 (98.0%) | 75 (15.3%) | 48 (9.8%) | 2 (0.4%) | 2 (0.4%) | * | react-native | 168 | 130 (77.4%) | 79 (47.0%) | 81 (48.2%) | 0 (0.0%) | 0 (0.0%) | | rust | 171 | 128 (74.9%) | 30 (17.5%) | 27 (15.8%) | 16 (9.4%) | 14 (8.2%) | | spark | 186 | 149 (80.1%) | 52 (28.0%) | 52 (28.0%) | 2 (1.1%) | 2 (1.1%) | | tensorflow | 115 | 66 (57.4%) | 48 (41.7%) | 48 (41.7%) | 5 (4.3%) | 5 (4.3%) | | test-more | 19 | 15 (78.9%) | 2 (10.5%) | 2 (10.5%) | 1 (5.3%) | 1 (5.3%) | * | test-unit | 51 | 34 (66.7%) | 14 (27.5%) | 8 (15.7%) | 2 (3.9%) | 2 (3.9%) | * | xmonad | 23 | 22 (95.7%) | 2 (8.7%) | 2 (8.7%) | 1 (4.3%) | 1 (4.3%) | * | --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- | | totals | 6668 | 4391 (65.9%) | 1496 (22.4%) | 1491 (22.4%) | 150 (2.2%) | 144 (2.2%) | | totals (training set) | 4552 | 3195 (70.2%) | 1053 (23.1%) | 1061 (23.3%) | 86 (1.9%) | 88 (1.9%) | | totals (test set) | 2116 | 1196 (56.5%) | 443 (20.9%) | 430 (20.3%) | 64 (3.0%) | 56 (2.6%) | In this table, the numbers are the count and percentage of human-rated sliders that the corresponding algorithm got *wrong*. The columns are * "repository" - the name of the repository used. I used the diffs between successive non-merge commits on the HEAD branch of the corresponding repository. * "count" - the number of sliders that were human-rated. I chose most, but not all, sliders to rate from those among which the various algorithms gave different answers. * "Git 2.9.0" - the default algorithm used by `git diff` in Git 2.9.0. * "compaction" - the heuristic used by `git diff --compaction-heuristic` in Git 2.9.0. * "compaction-fixed" - the heuristic used by `git diff --compaction-heuristic` after the fixes from earlier in this patch series. Note that the results are not dramatically different than those for "compaction". Both produce non-ideal diffs only about 1/3 as often as the default `git diff`. * "indent-1" - the new `--indent-heuristic` algorithm, using the first set of weighting factors, determined as described above. * "indent-2" - the new `--indent-heuristic` algorithm, using the final set of weighting factors, determined as described below. * `*` - indicates that repo was part of training set used to determine the first set of weighting factors. The fact that the heuristic performed nearly as well on the test set as on the training set in column "indent-1" is a good indication that the heuristic was not over-trained. Given that fact, I ran a second round of optimization, using the entire corpus as the training set. The resulting set of weights gave the results in column "indent-2". These are the weights included in this patch. The final result gives consistently and significantly better results across the whole corpus than either `git diff` or `git diff --compaction-heuristic`. It makes only about 1/30 as many errors as the former and about 1/10 as many errors as the latter. (And a good fraction of the remaining errors are for diffs that involve weirdly-formatted code, sometimes apparently machine-generated.) The tools that were used to do this optimization and analysis, along with the human-generated data values, are recorded in a separate project [1]. This patch adds a new command-line option `--indent-heuristic`, and a new configuration setting `diff.indentHeuristic`, that activate this heuristic. This interface is only meant for testing purposes, and should be finalized before including this change in any release. [1] https://github.com/mhagger/diff-slider-tools Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-23xdl_change_compact(): introduce the concept of a change groupLibravatar Michael Haggerty1-90/+203
The idea of xdl_change_compact() is fairly simple: * Proceed through groups of changed lines in the file to be compacted, keeping track of the corresponding location in the "other" file. * If possible, slide the group up and down to try to give the most aesthetically pleasing diff. Whenever it is slid, the current location in the other file needs to be adjusted. But these simple concepts are obfuscated by a lot of index handling that is written in terse, subtle, and varied patterns. I found it very hard to convince myself that the function was correct. So introduce a "struct group" that represents a group of changed lines in a file. Add some functions that perform elementary operations on groups: * Initialize a group to the first group in a file * Move to the next or previous group in a file * Slide a group up or down Even though the resulting code is longer, I think it is easier to understand and review. Its performance is not changed appreciably (though it would be if `group_next()` and `group_previous()` were not inlined). ...and in fact, the rewriting helped me discover another bug in the --compaction-heuristic code: The update of blank_lines was never done for the highest possible position of the group. This means that it could fail to slide the group to its highest possible position, even if that position had a blank line as its last line. So for example, it yielded the following diff: $ git diff --no-index --compaction-heuristic a.txt b.txt diff --git a/a.txt b/b.txt index e53969f..0d60c5fe 100644 --- a/a.txt +++ b/b.txt @@ -1,3 +1,7 @@ 1 A + +B + +A 2 when in fact the following diff is better (according to the rules of --compaction-heuristic): $ git diff --no-index --compaction-heuristic a.txt b.txt diff --git a/a.txt b/b.txt index e53969f..0d60c5fe 100644 --- a/a.txt +++ b/b.txt @@ -1,3 +1,7 @@ 1 +A + +B + A 2 The new code gives the bottom answer. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-23recs_match(): take two xrecord_t pointers as argumentsLibravatar Michael Haggerty1-7/+7
There is no reason for it to take an array and two indexes as argument, as it only accesses two elements of the array. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-23is_blank_line(): take a single xrecord_t as argumentLibravatar Michael Haggerty1-4/+4
There is no reason for it to take an array and index as argument, as it only accesses a single element of the array. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-23xdl_change_compact(): only use heuristic if group can't be matchedLibravatar Michael Haggerty1-19/+19
If the changed group of lines can be matched to a group in the other file, then that positioning should take precedence over the compaction heuristic. The old code tried the heuristic unconditionally, which cost redundant effort and also was broken if the matching code had already shifted the group higher than the blank line. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-23xdl_change_compact(): fix compaction heuristic to adjust ixoLibravatar Michael Haggerty1-0/+1
The code branch used for the compaction heuristic forgot to keep ixo in sync while the group was shifted. This is certainly wrong, as it causes the two counters to get out of sync. I *think* that this bug could also have caused the function to read past the end of the rchgo array, though I haven't done the work to prove it for sure. Here is my reasoning: If ixo is not decremented correctly during one iteration of the outer while loop, then it will loose sync with the ix counter. In particular, ixo will be too large. Suppose that the next iterations of the outer while loop (i.e., processing the next block of add/delete lines) don't have any sliders. Then the ixo counter would be incremented by the number of non-changed lines in xdf, which is the same as the number of non-changed lines in xdfo that *should have* followed the group that experienced the malfunction. But since ixo was too large at the end of that iteration, it will be incremented past the end of the xdfo->rchg array, and will try to read that memory illegally. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-19xdiff: implement empty line chunk heuristicLibravatar Stefan Beller1-0/+26
In order to produce the smallest possible diff and combine several diff hunks together, we implement a heuristic from GNU Diff which moves diff hunks forward as far as possible when we find common context above and below a diff hunk. This sometimes produces less readable diffs when writing C, Shell, or other programming languages, ie: ... /* + * + * + */ + +/* ... instead of the more readable equivalent of ... +/* + * + * + */ + /* ... Implement the following heuristic to (optionally) produce the desired output. If there are diff chunks which can be shifted around, shift each hunk such that the last common empty line is below the chunk with the rest of the context above. This heuristic appears to resolve the above example and several other common issues without producing significantly weird results. However, as with any heuristic it is not really known whether this will always be more optimal. Thus, it can be disabled via diff.compactionHeuristic. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-18xdiff: add recs_match helper functionLibravatar Jacob Keller1-4/+10
It is a common pattern in xdl_change_compact to check that hashes and strings match. The resulting code to perform this change causes very long lines and makes it hard to follow the intention. Introduce a helper function recs_match which performs both checks to increase code readability. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-19diff: add --ignore-blank-lines optionLibravatar Antoine Pelisse1-1/+28
The goal of the patch is to introduce the GNU diff -B/--ignore-blank-lines as closely as possible. The short option is not available because it's already used for "break-rewrites". When this option is used, git-diff will not create hunks that simply add or remove empty lines, but will still show empty lines addition/suppression if they are close enough to "valuable" changes. There are two differences between this option and GNU diff -B option: - GNU diff doesn't have "--inter-hunk-context", so this must be handled - The following sequence looks like a bug (context is displayed twice): $ seq 5 >file1 $ cat <<EOF >file2 change 1 2 3 4 5 change EOF $ diff -u -B file1 file2 --- file1 2013-06-08 22:13:04.471517834 +0200 +++ file2 2013-06-08 22:13:23.275517855 +0200 @@ -1,5 +1,7 @@ +change 1 2 + 3 4 5 @@ -3,3 +5,4 @@ 3 4 5 +change So here is a more thorough description of the option: - real changes are interesting - blank lines that are close enough (less than context size) to interesting changes are considered interesting (recursive definition) - "context" lines are used around each hunk of interesting changes - If two hunks are separated by less than "inter-hunk-context", they will be merged into one. The implementation does the "interesting changes selection" in a single pass. Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12Correct common spelling mistakes in comments and testsLibravatar Stefano Lattarini1-1/+1
Most of these were found using Lucas De Marchi's codespell tool. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-09xdiff: remove emit_func() and xdi_diff_hunks()Libravatar René Scharfe1-5/+1
The functions are unused now, remove them. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-09xdiff: add hunk_func()Libravatar René Scharfe1-0/+17
Add a way to register a callback function that is gets passed the start line and line count of each hunk of a diff. Only standard types are used. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-19xdiff: PATIENCE/HISTOGRAM are not independent option bitsLibravatar Junio C Hamano1-2/+2
Because the default Myers, patience and histogram algorithms cannot be in effect at the same time, XDL_PATIENCE_DIFF and XDL_HISTOGRAM_DIFF are not independent bits. Instead of wasting one bit per algorithm, define a few macros to access the few bits they occupy and update the code that access them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-12teach --histogram to diffLibravatar Tay Ray Chuan1-0/+3
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show that it is faster than its --patience cousin, as well as the default Meyers algorithm. The implementation has been reworked to use structs and pointers, instead of bitmasks, thus doing away with JGit's 2^28 line limit. We also use xdiff's default hash table implementation (xdl_hash_bits() with XDL_HASHLONG()) for convenience. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-22refactor: use bitsizeof() instead of 8 * sizeof()Libravatar Pierre Habouzit1-1/+1
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-22Fix typos / spelling in commentsLibravatar Mike Ralphson1-1/+1
Signed-off-by: Mike Ralphson <mike@abacus.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-15Fix various dead stores found by the clang static analyzerLibravatar Benjamin Kramer1-3/+2
http-push.c::finish_request(): request is initialized by the for loop index-pack.c::free_base_data(): b is initialized by the for loop merge-recursive.c::process_renames(): move compare to narrower scope, and remove unused assignments to it remove unused variable renames2 xdiff/xdiffi.c::xdl_recs_cmp(): remove unused variable ec xdiff/xemit.c::xdl_emit_diff(): xche is always overwritten Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-07Implement the patience diff algorithmLibravatar Johannes Schindelin1-0/+3
The patience diff algorithm produces slightly more intuitive output than the classic Myers algorithm, as it does not try to minimize the number of +/- lines first, but tries to preserve the lines that are unique. To this end, it first determines lines that are unique in both files, then the maximal sequence which preserves the order (relative to both files) is extracted. Starting from this initial set of common lines, the rest of the lines is handled recursively, with Myers' algorithm as a fallback when the patience algorithm fails (due to no common unique lines). This patch includes memory leak fixes by Pierre Habouzit. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-25Allow alternate "low-level" emit function from xdl_diffLibravatar Brian Downing1-1/+3
For some users (e.g. git blame), getting textual patch output is just extra work, as they can get all the information they need from the low- level diff structures. Allow for an alternate low-level emit function to be defined to allow bypassing the textual patch generation; set xemitconf_t's emit_func member to enable this. The (void (*)()) type is pretty ugly, but the alternative would be to include most of the private xdiff headers in xdiff.h to get the types required for the "proper" function prototype. Also, a (void *) won't work, as ANSI C doesn't allow a function pointer to be cast to an object pointer. Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-15Remove unreachable statementsLibravatar Guido Ostkamp1-2/+0
Solaris Workshop Compiler found a few unreachable statements. Signed-off-by: Guido Ostkamp <git@ostkamp.fastmail.fm> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2006-12-02xdiff: add xdl_merge()Libravatar Johannes Schindelin1-2/+1
This new function implements the functionality of RCS merge, but in-memory. It returns < 0 on error, otherwise the number of conflicts. Finding the conflicting lines can be a very expensive task. You can control the eagerness of this algorithm: - a level value of 0 means that all overlapping changes are treated as conflicts, - a value of 1 means that if the overlapping changes are identical, it is not treated as a conflict. - If you set level to 2, overlapping changes will be analyzed, so that almost identical changes will not result in huge conflicts. Rather, only the conflicting lines will be shown inside conflict markers. With each increasing level, the algorithm gets slower, but more accurate. Note that the code for level 2 depends on the simple definition of mmfile_t specific to git, and therefore it will be harder to port that to LibXDiff. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-10Fix more typos, primarily in the codeLibravatar Pavel Roskin1-3/+3
The only visible change is that git-blame doesn't understand "--compability" anymore, but it does accept "--compatibility" instead, which is already documented. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-23Teach diff about -b and -w flagsLibravatar Johannes Schindelin1-6/+6
This adds -b (--ignore-space-change) and -w (--ignore-all-space) flags to diff. The main part of the patch is teaching libxdiff about it. [jc: renamed xdl_line_match() to xdl_recmatch() since the former is used for different purposes in xpatchi.c which is in the parts of the upstream source we do not use.] Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-13xdiff: post-process hunks to make them consistent.Libravatar Davide Libenzi1-5/+109
2006-04-08xdiff/xdiffi.c: fix warnings about possibly uninitialized variablesLibravatar Marco Roeland1-2/+3
Compiling this module gave the following warnings (some double dutch!): xdiff/xdiffi.c: In functie 'xdl_recs_cmp': xdiff/xdiffi.c:298: let op: 'spl.i1' may be used uninitialized in this function xdiff/xdiffi.c:298: let op: 'spl.i2' may be used uninitialized in this function xdiff/xdiffi.c:219: let op: 'fbest1' may be used uninitialized in this function xdiff/xdiffi.c:219: let op: 'bbest1' may be used uninitialized in this function A superficial tracking of their usage, without deeper knowledge about the algorithm, indeed confirms that there are code paths on which these variables will be used uninitialized. In practice these code paths might never be reached, but then these fixes will not change the algorithm. If these code paths are ever reached we now at least have a predictable outcome. And should the very small performance impact of these initializations be noticeable, then they should at least be replaced by comments why certain code paths will never be reached. Some extra initializations in this patch now fix the warnings.
2006-04-04Clean-up trivially redundant diff.Libravatar Davide Libenzi1-6/+1
Also corrects the line numbers in unified output when using zero lines context.
2006-03-25Use a *real* built-in diff generatorLibravatar Linus Torvalds1-0/+469
This uses a simplified libxdiff setup to generate unified diffs _without_ doing fork/execve of GNU "diff". This has several huge advantages, for example: Before: [torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null real 0m24.818s user 0m13.332s sys 0m8.664s After: [torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null real 0m4.563s user 0m2.944s sys 0m1.580s and the fact that this should be a lot more portable (ie we can ignore all the issues with doing fork/execve under Windows). Perhaps even more importantly, this allows us to do diffs without actually ever writing out the git file contents to a temporary file (and without any of the shell quoting issues on filenames etc etc). NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the current "diff-core" code actually will always write the temp-files, because it used to be something that you simply had to do. So this current one actually writes a temp-file like before, and then reads it into memory again just to do the diff. Stupid. But if this basic infrastructure is accepted, we can start switching over diff-core to not write temp-files, which should speed things up even further, especially when doing big tree-to-tree diffs. Now, in the interest of full disclosure, I should also point out a few downsides: - the libxdiff algorithm is different, and I bet GNU diff has gotten a lot more testing. And the thing is, generating a diff is not an exact science - you can get two different diffs (and you will), and they can both be perfectly valid. So it's not possible to "validate" the libxdiff output by just comparing it against GNU diff. - GNU diff does some nice eye-candy, like trying to figure out what the last function was, and adding that information to the "@@ .." line. libxdiff doesn't do that. - The libxdiff thing has some known deficiencies. In particular, it gets the "\No newline at end of file" case wrong. So this is currently for the experimental branch only. I hope Davide will help fix it. That said, I think the huge performance advantage, and the fact that it integrates better is definitely worth it. But it should go into a development branch at least due to the missing newline issue. Technical note: this is based on libxdiff-0.17, but I did some surgery to get rid of the extraneous fat - stuff that git doesn't need, and seriously cutting down on mmfile_t, which had much more capabilities than the diff algorithm either needed or used. In this version, "mmfile_t" is just a trivial <pointer,length> tuple. That said, I tried to keep the differences to simple removals, so that you can do a diff between this and the libxdiff origin, and you'll basically see just things getting deleted. Even the mmfile_t simplifications are left in a state where the diffs should be readable. Apologies to Davide, whom I'd love to get feedback on this all from (I wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old complex format had a helper function for that, but I did my surgery with the goal in mind that eventually we _should_ just do mmfile_t mf; buf = read_sha1_file(sha1, type, &size); mf->ptr = buf; mf->size = size; .. use "mf" directly .. which was really a nightmare with the old "helpful" mmfile_t, and really is that easy with the new cut-down interfaces). [ Btw, as any hawk-eye can see from the diff, this was actually generated with itself, so it is "self-hosting". That's about all the testing it has gotten, along with the above kernel diff, which eye-balls correctly, but shows the newline issue when you double-check it with "git-apply" ] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>