summaryrefslogtreecommitdiff
path: root/wt-status.h
AgeCommit message (Collapse)AuthorFilesLines
2017-06-30Merge branch 'ks/status-initial-commit'Libravatar Junio C Hamano1-0/+1
"git status" has long shown essentially the same message as "git commit"; the message it gives while preparing for the root commit, i.e. "Initial commit", was hard to understand for some new users. Now it says "No commits yet" to stress more on the current status (rather than the commit the user is preparing for, which is more in line with the focus of "git commit"). * ks/status-initial-commit: status: contextually notify user about an initial commit
2017-06-21status: contextually notify user about an initial commitLibravatar Kaartic Sivaraam1-0/+1
The existing message, "Initial commit", makes sense for the commit template notifying users that it's their initial commit, but is confusing when merely checking the status of a fresh repository (or orphan branch) without having any commits yet. Change the output of "status" to say "No commits yet" when "git status" is run on a fresh repo (or orphan branch), while retaining the current "Initial commit" message displayed in the template that's displayed in the editor when the initial commit is being authored. Correspondingly change the output of "short status" to "No commits yet on " when "git status -sb" is run on a fresh repo (or orphan branch). A few alternatives considered were, * Waiting for initial commit * Your current branch does not have any commits * Current branch waiting for initial commit The most succint one among the alternatives was chosen. [with help on tests from Ævar] Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-18status: add optional stash count informationLibravatar Liam Beguin1-0/+1
Introduce '--show-stash' and its configuration option 'status.showStash' to allow git-status to show information about currently stashed entries. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-18interpret-trailers: honor the cut lineLibravatar Brian Malehorn1-1/+1
If a commit message is edited with the "verbose" option, the buffer will have a cut line and diff after the log message, like so: my subject # ------------------------ >8 ------------------------ # Do not touch the line above. # Everything below will be removed. diff --git a/foo.txt b/foo.txt index 5716ca5..7601807 100644 --- a/foo.txt +++ b/foo.txt @@ -1 +1 @@ -bar +baz "git interpret-trailers" is unaware of the cut line, and assumes the trailer block would be at the end of the whole thing. This can easily be seen with: $ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \ git commit --amend -v Teach "git interpret-trailers" to notice the cut-line and ignore the remainder of the input when looking for a place to add new trailer block. This makes it consistent with how "git commit -v -s" inserts a new Signed-off-by: line. This can be done by the same logic as the existing helper function, wt_status_truncate_message_at_cut_line(), uses, but it wants the caller to pass a strbuf to it. Because the function ignore_non_trailer() used by the command takes a <pointer, length> pair, not a strbuf, steal the logic from wt_status_truncate_message_at_cut_line() to create a new wt_status_locate_end() helper function that takes <pointer, length> pair, and make ignore_non_trailer() call it to help "interpret-trailers". Since there is only one caller of wt_status_truncate_message_at_cut_line() in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead and remove the old helper that no longer has any caller. Signed-off-by: Brian Malehorn <bmalehorn@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-26Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZLibravatar brian m. carlson1-1/+1
Since we will likely be introducing a new hash function at some point, and that hash function might be longer than 20 bytes, use the constant GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead of GIT_SHA1_RAWSZ. This will ease the transition down the line by distinguishing between places where we need to allocate memory suitable for the largest hash from those where we need to handle the current hash. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-07wt-status: teach has_{unstaged,uncommitted}_changes() about submodulesLibravatar Johannes Schindelin1-3/+4
Sometimes we are *actually* interested in those changes... For example when an interactive rebase wants to continue with a staged submodule update. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-07wt-status: export also the has_un{staged,committed}_changes() functionsLibravatar Johannes Schindelin1-1/+3
They will be used in the upcoming rebase helper. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-07wt-status: make the require_clean_work_tree() function reusableLibravatar Johannes Schindelin1-0/+3
The function used by "git pull" to stop the user when the working tree has changes is useful in other places. Let's move it into a more prominent (and into an actually reusable) spot: wt-status.[ch]. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11status: print branch info with --porcelain=v2 --branchLibravatar Jeff Hostetler1-0/+1
Expand porcelain v2 output to include branch and tracking branch information. This includes the commit id, the branch, the upstream branch, and the ahead and behind counts. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11status: collect per-file data for --porcelain=v2Libravatar Jeff Hostetler1-0/+4
Collect extra per-file data for porcelain V2 format. The output of `git status --porcelain` leaves out many details about the current status that clients might like to have. This can force them to be less efficient as they may need to launch secondary commands (and try to match the logic within git) to accumulate this extra information. For example, a GUI IDE might want the file mode to display the correct icon for a changed item (without having to stat it afterwards). Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-05status: cleanup API to wt_status_printLibravatar Jeff Hostetler1-4/+12
Refactor the API between builtin/commit.c and wt-status.[ch]. Hide the details of the various wt_*status_print() routines inside wt-status.c behind a single (new) wt_status_print() routine. Eliminate the switch statements from builtin/commit.c. Allow details of new status formats to be isolated within wt-status.c Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-05status: rename long-format print routinesLibravatar Jeff Hostetler1-1/+1
Rename the various wt_status_print*() routines to be wt_longstatus_print*() to make it clear that these routines are only concerned with the normal/long status output and reduce developer confusion as other status formats are added in the future. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22wt-status.c: split bisect detection out of wt_status_get_state()Libravatar Nguyễn Thái Ngọc Duy1-0/+2
And make it work with any given worktree, in preparation for (again) find_shared_symref(). read_and_strip_branch() is deleted because it's no longer used. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22wt-status.c: make wt_status_check_rebase() work on any worktreeLibravatar Nguyễn Thái Ngọc Duy1-1/+4
This is a preparation step for find_shared_symref() to detect if any worktree is being rebased. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22wt-status.c: split rebase detection out of wt_status_get_state()Libravatar Nguyễn Thái Ngọc Duy1-0/+1
worktree.c:find_shared_symref() later needs to know if a branch is being rebased, and only rebase, no cherry-pick, do detached branch... Split this code so it can be used independently from other in-progress tests. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-21wt-status: move #include "pathspec.h" to the headerLibravatar SZEDER Gábor1-0/+1
The declaration of 'struct wt_status' requires the declararion of 'struct pathspec'. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-06wt-status: refactor detached HEAD analysisLibravatar Michael J Gruber1-0/+1
wt_status_print() is the only caller of wt_status_get_detached_from(). The latter performs most of the analysis of a detached HEAD, including finding state->detached_from; the caller checks whether the detached HEAD is still at state->detached_from or has moved away. Move that last bit of analysis to wt_status_get_detached_from(), too, and store the boolean result in state->detached_at. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31Merge branch 'mm/status-porcelain-format-i18n-fix'Libravatar Junio C Hamano1-0/+1
* mm/status-porcelain-format-i18n-fix: status: disable translation when --porcelain is used
2014-03-26status: disable translation when --porcelain is usedLibravatar Matthieu Moy1-0/+1
"git status --branch --porcelain" displays the status of the branch (ahead, behind, gone), and used gettext to translate the string. Use hardcoded strings when --porcelain is used, but keep the gettext translation for "git status --short" which is essentially the same, but meant to be read by a human. Reported-by: Anarky <ghostanarky@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18wt-status.c: move cut-line print code out to wt_status_add_cut_lineLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05commit -v: strip diffs and submodule shortlogs from the commit messageLibravatar Jens Lehmann1-0/+1
When using the '-v' option of "git commit" the diff added to the commit message temporarily for editing is stripped off after the user exited the editor by searching for "\ndiff --git " and truncating the commmit message there if it is found. But this approach has two problems: - when the commit message itself contains a line starting with "diff --git" it will be truncated there prematurely; and - when the "diff.submodule" setting is set to "log", the diff may start with "Submodule <hash1>..<hash2>", which will be left in the commit message while it shouldn't. Fix that by introducing a special scissor separator line starting with the comment character ('#' or the core.commentChar config if set) followed by two lines describing what it is for. The scissor line - which will not be translated - is used to reliably detect the start of the diff so it can be chopped off from the commit message, no matter what the user enters there. Turn a known test failure fixed by this change into a successful test; also add one for a diff starting with a submodule log and another one for proper handling of the comment char. Reported-by: Ari Pollak <ari@debian.org> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-11status: show commit sha1 in "You are currently cherry-picking" messageLibravatar Ralf Thielow1-0/+1
Especially helpful when cherry-picking multiple commits. Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-20Merge branch 'mm/commit-template-squelch-advice-messages'Libravatar Junio C Hamano1-0/+1
From the commit log template, remove irrelevant "advice" messages that are shared with "git status" output. * mm/commit-template-squelch-advice-messages: commit: disable status hints when writing to COMMIT_EDITMSG wt-status: turn advice_status_hints into a field of wt_status commit: factor status configuration is a helper function
2013-09-20Merge branch 'mm/status-without-comment-char'Libravatar Junio C Hamano1-0/+1
"git status" now omits the prefix to make its output a comment in a commit log editor, which is not necessary for human consumption. We may want to tighten the output to omit unnecessary trailing blank lines, but that does not have to be in the scope of this series. * mm/status-without-comment-char: t7508: avoid non-portable sed expression status: add missing blank line after list of "other" files tests: don't set status.displayCommentPrefix file-wide status: disable display of '#' comment prefix by default submodule summary: ignore --for-status option wt-status: use argv_array API builtin/stripspace.c: fix broken indentation
2013-09-12wt-status: turn advice_status_hints into a field of wt_statusLibravatar Matthieu Moy1-0/+1
No behavior change in this patch, but this makes the display of status hints more flexible as they can be enabled or disabled for individual calls to commit.c:run_status(). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-09Merge branch 'jl/submodule-mv'Libravatar Junio C Hamano1-1/+1
"git mv A B" when moving a submodule A does "the right thing", inclusing relocating its working tree and adjusting the paths in the .gitmodules file. * jl/submodule-mv: (53 commits) rm: delete .gitmodules entry of submodules removed from the work tree mv: update the path entry in .gitmodules for moved submodules submodule.c: add .gitmodules staging helper functions mv: move submodules using a gitfile mv: move submodules together with their work trees rm: do not set a variable twice without intermediate reading. t6131 - skip tests if on case-insensitive file system parse_pathspec: accept :(icase)path syntax pathspec: support :(glob) syntax pathspec: make --literal-pathspecs disable pathspec magic pathspec: support :(literal) syntax for noglob pathspec kill limit_pathspec_to_literal() as it's only used by parse_pathspec() parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN parse_pathspec: make sure the prefix part is wildcard-free rename field "raw" to "_raw" in struct pathspec tree-diff: remove the use of pathspec's raw[] in follow-rename codepath remove match_pathspec() in favor of match_pathspec_depth() remove init_pathspec() in favor of parse_pathspec() remove diff_tree_{setup,release}_paths convert common_prefix() to use struct pathspec ...
2013-09-06status: disable display of '#' comment prefix by defaultLibravatar Matthieu Moy1-0/+1
Historically, "git status" needed to prefix each output line with '#' so that the output could be added as comment to the commit message. This prefix comment has no real purpose when "git status" is ran from the command-line, and this may distract users from the real content. Disable this prefix comment by default, and make it re-activable for users needing backward compatibility with status.displayCommentPrefix. Obviously, "git commit" ignores status.displayCommentPrefix and keeps the comment unconditionnaly when writing to COMMIT_EDITMSG (but not when writing to stdout for an error message or with --dry-run). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15status: convert to use parse_pathspecLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09wt-status: use "format" function attribute for status_printfLibravatar Jeff King1-4/+4
These functions could benefit from the added compile-time safety of having the compiler check printf arguments. Unfortunately, we also sometimes pass an empty format string, which will cause false positives with -Wformat-zero-length. In this case, that warning is wrong because our function is not a no-op with an empty format: it may be printing colorized output along with a trailing newline. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-02status: show commit sha1 in "You are currently reverting" messageLibravatar Matthieu Moy1-0/+1
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-02status: show 'revert' state and status hintLibravatar Matthieu Moy1-0/+1
This is the logical equivalent for "git status" of 3ee4452 (bash: teach __git_ps1 about REVERT_HEAD). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-01Merge branch 'nd/branch-show-rebase-bisect-state'Libravatar Junio C Hamano1-2/+5
Add a bit more information to "git status" during a rebase/bisect session. * nd/branch-show-rebase-bisect-state: status, branch: fix the misleading "bisecting" message branch: show more information when HEAD is detached status: show more info than "currently not on any branch" wt-status: move wt_status_get_state() out to wt_status_print() wt-status: split wt_status_state parsing function out wt-status: move strbuf into read_and_strip_branch()
2013-03-21Merge branch 'tb/document-status-u-tradeoff'Libravatar Junio C Hamano1-0/+1
Suggest users to look into using--untracked=no option when "git status" takes too long. * tb/document-status-u-tradeoff: status: advise to consider use of -u when read_directory takes too long git status: document trade-offs in choosing parameters to the -u option
2013-03-16status: show more info than "currently not on any branch"Libravatar Nguyễn Thái Ngọc Duy1-1/+3
When a remote ref or a tag is checked out, HEAD is automatically detached. There is no user-friendly way to find out what ref is checked out in this case. This patch digs in reflog for this information and shows "HEAD detached from origin/master" or "HEAD detached at v1.8.0" instead of "currently not on any branch". When it cannot figure out the original ref, it shows an abbreviated SHA-1. "Currently not on any branch" would never display (unless reflog is pruned to near empty that the last checkout entry is lost). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-16wt-status: split wt_status_state parsing function outLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-16wt-status: move strbuf into read_and_strip_branch()Libravatar Nguyễn Thái Ngọc Duy1-2/+2
The strbufs are placed outside read_and_strip_branch as a premature optimization: when it reads "refs/heads/foo" to strbuf and wants to return just "foo", it could do so without memory movement. In return the caller must not use the returned pointer after releasing strbufs, which own the buffers that contain the returned strings. It's a clumsy design. By moving strbufs into read_and_strip_branch(), the returned pointer always points to a malloc'd buffer or NULL. The pointer can be passed around and freed after use. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-16status: advise to consider use of -u when read_directory takes too longLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Introduce advice.statusUoption to suggest considering use of -u to strike different trade-off when it took more than 2 seconds to enumerate untracked/ignored files. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-05status: show the branch name if possible in in-progress infoLibravatar Nguyễn Thái Ngọc Duy1-0/+2
The typical use-case is starting a rebase, do something else, come back the day after, run "git status" or make a new commit and wonder what in the world's going on. Which branch is being rebased is probably the most useful tidbit to help, but the target may help too. Ideally, I would have loved to see "rebasing master on origin/master", but the target ref name is not stored during rebase, so this patch writes "rebasing master on a78c8c98b" as a half-measure to remind future users of that potential improvement. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-15wt-status.c: mark a private file-scope symbol as staticLibravatar Junio C Hamano1-2/+0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-16status: color in-progress message like other header messagesLibravatar Jeff King1-1/+0
The "status" command recently learned to describe the in-progress operation in its long output format (e.g., rebasing, am, etc). This message gets its own slot in the color table, even though it is not configurable. As a result, if the user has set color.status.header to a non-default value, this message will not match (and cannot be made to match, as there is no config option). It is probably more sane to just color it like the rest of the text (i.e., just use color.status.header). This would not allow users to customize the color of this message independently, but they cannot do that with the current code anyway, and if somebody wants to build customizable colorization later, this patch does not make it much harder to do so. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-14wt-status.*: better advices for git status addedLibravatar Lucien Kong1-0/+11
This patch provides new informative help messages in the display of 'git status' (at the top) during conflicts, rebase, am, bisect or cherry-pick process. The new messages are not shown when using options such as -s or --porcelain. The messages about the current situation of the user are always displayed but the advices on what the user needs to do in order to resume a rebase/bisect/am/commit after resolving conflicts can be hidden by setting advice.statushints to 'false' in the config file. Thus, information about the updated advice.statushints key are added in Documentation/config.txt. Also, the test t7060-wt-status.sh is now working with the new help messages. Tests about suggestions of "git rm" are also added. Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr> Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr> Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr> Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr> Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-08status: refactor colopts handlingLibravatar Jeff King1-1/+1
The current code reads the config and command-line options into a separate "colopts" variable, and then copies the contents of that variable into the "struct wt_status". We can eliminate the extra variable and copy just write straight into the wt_status struct. This simplifies the "status" code a little bit. Unfortunately, it makes the "commit" code one line more complex; a side effect of the separate variable was that "commit" did not copy the colopts variable, so any column.status configuration had no effect. The result still ends up cleaner, though. In the previous version, it was unclear whether commit simply forgot to copy the colopt variable, or whether it was intentional. Now it explicitly turns off column options. Furthermore, if commit later learns to respect column.status, this will make the end result simpler. I punted on just adding that feature now, because it was sufficiently non-obvious that it should not go into a refactoring patch. Signed-off-by: Jeff King <peff@peff.net>
2012-05-08Merge branch 'jk/maint-status-porcelain-z-b' into HEADLibravatar Jeff King1-2/+4
* jk/maint-status-porcelain-z-b: status: respect "-b" for porcelain format status: fix null termination with "-b" status: refactor null_termination option commit: refactor option parsing Conflicts: wt-status.h
2012-05-08status: respect "-b" for porcelain formatLibravatar Jeff King1-1/+2
There is no reason not to, as the user has to explicitly ask for it, so we are not breaking compatibility by doing so. We can do this simply by moving the "show_branch" flag into the wt_status struct. As a bonus, this saves us from passing it explicitly, simplifying the code. Signed-off-by: Jeff King <peff@peff.net>
2012-05-08status: refactor null_termination optionLibravatar Jeff King1-2/+3
This option is passed separately to the wt_status printing functions, whereas every other formatting option is contained in the wt_status struct itself. Let's do the same here, so we can avoid passing it around through the call stack. Signed-off-by: Jeff King <peff@peff.net>
2012-04-27status: add --columnLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-19Merge branch 'jn/status-translatable'Libravatar Junio C Hamano1-0/+7
* jn/status-translatable: commit, status: use status_printf{,_ln,_more} helpers commit: refer to commit template as s->fp wt-status: add helpers for printing wt-status lines Conflicts: builtin/commit.c
2011-03-08wt-status: add helpers for printing wt-status linesLibravatar Jonathan Nieder1-0/+7
Introduce status_printf{,_ln,_more} wrapper functions around color_vfprintf() which take care of adding "#" to the beginning of status lines automatically. The semantics: - status_printf() is just like color_fprintf() but it adds a "# " at the beginning of each line of output; - status_printf_ln() is a convenience function that additionally adds "\n" at the end; - status_printf_more() is a variant of status_printf() used to continue lines that have already started. It suppresses the "#" at the beginning of the first line. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21Teach commit about CHERRY_PICK_HEADLibravatar Jay Soffian1-1/+8
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after a conflicting cherry-pick. While this would preserve the original commit's authorship, it would sadly discard cherry-pick's carefully crafted MERGE_MSG (which contains the list of conflicts as well as the original commit-id in the case of cherry-pick -x). On the other hand, if a bare 'commit' were performed, it would preserve the MERGE_MSG while resetting the authorship. In other words, there was no way to simultaneously take the authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG. This change fixes that situation. A bare 'commit' will now take the authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG. If the user wishes to reset authorship, that must now be done explicitly via --reset-author. A side-benefit of passing commit authorship along this way is that we can eliminate redundant authorship parsing code from revert.c. (Also removed an unused include from revert.c) Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29status: show branchname with a configurable colorLibravatar Aleksi Aalto1-2/+4
You can tell "git status" to paint the name of the current branch in its output (the line that says "On branch ...") by setting the configuration variable color.status.branch; it is by default turned off. Signed-off-by: Aleksi Aalto <aga@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>