summaryrefslogtreecommitdiff
path: root/wt-status.h
AgeCommit message (Collapse)AuthorFilesLines
2020-06-18wt-status: show sparse checkout status as wellLibravatar Elijah Newren1-0/+2
Some of the early feedback of folks trying out sparse-checkouts at $dayjob is that sparse checkouts can sometimes be disorienting; users can forget that they had a sparse-checkout and then wonder where files went. Add some output to 'git status' in the form of a simple line that states: You are in a sparse checkout with 35% of files present. where, obviously, the exact figure changes depending on what percentage of files from the index do not have the SKIP_WORKTREE bit set. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-06commit: give correct advice for empty commit during a rebaseLibravatar Phillip Wood1-1/+7
In dcb500dc16c (cherry-pick/revert: advise using --skip, 2019-07-02), `git commit` learned to suggest to run `git cherry-pick --skip` when trying to cherry-pick an empty patch. However, it was overlooked that there are more conditions than just a `git cherry-pick` when this advice is printed (which originally suggested the neutral `git reset`): the same can happen during a rebase. Let's suggest the correct command, even during a rebase. While at it, we adjust more places in `builtin/commit.c` that incorrectly assumed that the presence of a `CHERRY_PICK_HEAD` meant that surely this must be a `cherry-pick` in progress. Note: we take pains to handle the situation when a user runs a `git cherry-pick` _during_ a rebase. This is quite valid (e.g. in an `exec` line in an interactive rebase). On the other hand, it is not possible to run a rebase during a cherry-pick, meaning: if both `rebase-merge/` and `sequencer/` exist or CHERRY_PICK_HEAD and REBASE_HEAD point to the same commit , we still want to advise to use `git cherry-pick --skip`. Original-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-06commit: use enum value for multiple cherry-picksLibravatar Phillip Wood1-1/+8
Add FROM_CHERRY_PICK_MULTI for a sequence of cherry-picks rather than using a separate variable. Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19wt-status: convert struct wt_status to object_idLibravatar brian m. carlson1-1/+1
Change struct wt_status to use struct object_id instead of an array of unsigned char. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-31Merge branch 'jk/no-system-includes-in-dot-c'Libravatar Junio C Hamano1-1/+0
Compilation fix. * jk/no-system-includes-in-dot-c: wt-status.h: drop stdio.h include verify-tag: drop signal.h include
2019-07-09Merge branch 'md/sort-detached-head-first'Libravatar Junio C Hamano1-0/+3
"git branch --list" learned to always output the detached HEAD as the first item (when the HEAD is detached, of course), regardless of the locale. * md/sort-detached-head-first: ref-filter: sort detached HEAD lines firstly
2019-06-19ref-filter: sort detached HEAD lines firstlyLibravatar Matthew DeVore1-0/+3
Before this patch, "git branch" would put "(HEAD detached...)" and "(no branch, rebasing...)" lines before all the other branches *in most cases* except for when using Chinese-language messages. zh_CN generally uses a full-width "(" symbol (codepoint FF08) to match the full-width proportions of Chinese characters, and the translated strings we had did use them. This meant that the detached HEAD line would appear after all local refs and even after the remote refs if there were any. AFAIK, it is sometimes not jarring to see the half-width parenthesis in "full-width" text as in the CJK languages, for instance when there are no characters preceding or following the parenthesized text fragment. By removing the parenthesis from the localizable text, we can share strings with wt-status.c and remove a cautionary comment to translators. Remove the ( from the localizable portion of messages so the sorting happens properly regardless of locale. Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19wt-status.h: drop stdio.h includeLibravatar Jeff King1-1/+0
We started including stdio.h to pick up the declaration of "FILE" in f26a001226 (Enable wt-status output to a given FILE pointer., 2007-09-17). But there's no need, since headers can assume that git-compat-util.h has been included, which covers stdio. This should just be redundant, and not hurting anything (like pulling in includes out of order) because C files are supposed to always include git-compat-util.h first. But it's worth cleaning up to model good behavior. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-18merge: cleanup messages like commitLibravatar Denton Liu1-0/+1
This change allows git-merge messages to be cleaned up with the commit.cleanup configuration or --cleanup option, just like how git-commit does it. We also give git-pull the option of --cleanup so that it can also take advantage of this change. Finally, add testing to ensure that messages are properly cleaned up. Note that some newlines that were added to the commit message were removed so that if a file were read via -F, it would be copied faithfully. Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12wt-status.c: remove implicit dependency the_repositoryLibravatar Nguyễn Thái Ngọc Duy1-1/+3
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12wt-status.c: remove implicit dependency on the_indexLibravatar Nguyễn Thái Ngọc Duy1-5/+12
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-03roll wt_status_state into wt_status and populate in the collect phaseLibravatar Stephen P. Smith1-18/+20
Status variables were initialized in the collect phase and some variables were later freed in the print functions. A "struct wt_status" used to be sufficient for the output phase to work. It was designed to be filled in the collect phase and consumed in the output phase, but over time some fields were added and output phase started filling the fields. A "struct wt_status_state" that was used in other codepaths turned out to be useful in the "git status" output. This is not tied to "struct wt_status", so filling in the collect phase was not consistently followed. Move the status state structure variables into the status state structure and populate them in the collect functions. Create a new function to free the buffers that were being freed in the print function. Call this new function in commit.c where both the collect and print functions were being called. Based on a patch suggestion by Junio C Hamano. [1] [1] https://public-inbox.org/git/xmqqr2i5ueg4.fsf@gitster-ct.c.googlers.com/ Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-07wt-status: rename commitable to committableLibravatar Stephen P. Smith1-1/+1
Fix variable spelling error. Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-13add status config and command line options for rename detectionLibravatar Ben Peart1-1/+3
After performing a merge that has conflicts git status will, by default, attempt to detect renames which causes many objects to be examined. In a virtualized repo, those objects do not exist locally so the rename logic triggers them to be fetched from the server. This results in the status call taking hours to complete on very large repos vs seconds with this patch. Add a new config status.renames setting to enable turning off rename detection during status and commit. This setting will default to the value of diff.renames. Add a new config status.renamelimit setting to to enable bounding the time spent finding out inexact renames during status and commit. This setting will default to the value of diff.renamelimit. Add --no-renames command line option to status that enables overriding the config setting from the command line. Add --find-renames[=<n>] command line option to status that enables detecting renames and optionally setting the similarity index. Reviewed-by: Elijah Newren <newren@gmail.com> Original-Patch-by: Alejandro Pauly <alpauly@microsoft.com> Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14wt-status: convert struct wt_status_state to object_idLibravatar brian m. carlson1-3/+3
Convert the various *_sha1 members to use struct object_id instead. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-08Merge branch 'jh/status-no-ahead-behind'Libravatar Junio C Hamano1-0/+2
"git status" can spend a lot of cycles to compute the relation between the current branch and its upstream, which can now be disabled with "--no-ahead-behind" option. * jh/status-no-ahead-behind: status: support --no-ahead-behind in long format status: update short status to respect --no-ahead-behind status: add --[no-]ahead-behind to status and commit for V2 format. stat_tracking_info: return +1 when branches not equal
2018-01-24status: add --[no-]ahead-behind to status and commit for V2 format.Libravatar Jeff Hostetler1-0/+2
Teach "git status" and "git commit" to accept "--no-ahead-behind" and "--ahead-behind" arguments to request quick or full ahead/behind reporting. When "--no-ahead-behind" is given, the existing porcelain V2 line "branch.ab +x -y" is replaced with a new "branch.ab +? -?" line. This indicates that the branch and its upstream are or are not equal without the expense of computing the full ahead/behind values. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-23Merge branch 'nd/ita-wt-renames-in-status'Libravatar Junio C Hamano1-2/+3
"git status" after moving a path in the working tree (hence making it appear "removed") and then adding with the -N option (hence making that appear "added") detected it as a rename, but did not report the old and new pathnames correctly. * nd/ita-wt-renames-in-status: wt-status.c: handle worktree renames wt-status.c: rename rename-related fields in wt_status_change_data wt-status.c: catch unhandled diff status codes wt-status.c: coding style fix Use DIFF_DETECT_RENAME for detect_rename assignments t2203: test status output with porcelain v2 format
2017-12-27wt-status.c: rename rename-related fields in wt_status_change_dataLibravatar Nguyễn Thái Ngọc Duy1-2/+3
These field "head_path" is used for rename display only. In the next patch we introduce another rename pair where the rename source is no longer HEAD. Rename it to something more generic. While at there, rename "score" as well and store the rename diff code in a separate field instead of hardcoding key[0] (i.e. diff-index) in porcelain v2 code. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-31status: add option to show ignored files differentlyLibravatar Jameson Miller1-1/+7
Teach the status command more flexibility in how ignored files are reported. Currently, the reporting of ignored files and untracked files are linked. You cannot control how ignored files are reported independently of how untracked files are reported (i.e. `all` vs `normal`). This makes it impossible to show untracked files with the `all` option, but show ignored files with the `normal` option. This work 1) adds the ability to control the reporting of ignored files independently of untracked files and 2) introduces the concept of status reporting ignored paths that explicitly match an ignored pattern. There are 2 benefits to these changes: 1) if a consumer needs all untracked files but not all ignored files, there is a performance benefit to not scanning all contents of an ignored directory and 2) returning ignored files that explicitly match a path allow a consumer to make more informed decisions about when a status result might be stale. This commit implements --ignored=matching with --untracked-files=all. The following commit will implement --ignored=matching with --untracked=files=normal. As an example of where this flexibility could be useful is that our application (Visual Studio) runs the status command and presents the output. It shows all untracked files individually (e.g. using the '--untracked-files==all' option), and would like to know about which paths are ignored. It uses information about ignored paths to make decisions about when the status result might have changed. Additionally, many projects place build output into directories inside a repository's working directory (e.g. in "bin/" and "obj/" directories). Normal usage is to explicitly ignore these 2 directory names in the .gitignore file (rather than or in addition to the *.obj pattern).If an application could know that these directories are explicitly ignored, it could infer that all contents are ignored as well and make better informed decisions about files in these directories. It could infer that any changes under these paths would not affect the output of status. Additionally, there can be a significant performance benefit by avoiding scanning through ignored directories. When status is set to report matching ignored files, it has the following behavior. Ignored files and directories that explicitly match an exclude pattern are reported. If an ignored directory matches an exclude pattern, then the path of the directory is returned. If a directory does not match an exclude pattern, but all of its contents are ignored, then the contained files are reported instead of the directory. Signed-off-by: Jameson Miller <jamill@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30Merge branch 'ks/status-initial-commit'Libravatar Junio C Hamano1-0/+1
"git status" has long shown essentially the same message as "git commit"; the message it gives while preparing for the root commit, i.e. "Initial commit", was hard to understand for some new users. Now it says "No commits yet" to stress more on the current status (rather than the commit the user is preparing for, which is more in line with the focus of "git commit"). * ks/status-initial-commit: status: contextually notify user about an initial commit
2017-06-21status: contextually notify user about an initial commitLibravatar Kaartic Sivaraam1-0/+1
The existing message, "Initial commit", makes sense for the commit template notifying users that it's their initial commit, but is confusing when merely checking the status of a fresh repository (or orphan branch) without having any commits yet. Change the output of "status" to say "No commits yet" when "git status" is run on a fresh repo (or orphan branch), while retaining the current "Initial commit" message displayed in the template that's displayed in the editor when the initial commit is being authored. Correspondingly change the output of "short status" to "No commits yet on " when "git status -sb" is run on a fresh repo (or orphan branch). A few alternatives considered were, * Waiting for initial commit * Your current branch does not have any commits * Current branch waiting for initial commit The most succint one among the alternatives was chosen. [with help on tests from Ævar] Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-18status: add optional stash count informationLibravatar Liam Beguin1-0/+1
Introduce '--show-stash' and its configuration option 'status.showStash' to allow git-status to show information about currently stashed entries. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-18interpret-trailers: honor the cut lineLibravatar Brian Malehorn1-1/+1
If a commit message is edited with the "verbose" option, the buffer will have a cut line and diff after the log message, like so: my subject # ------------------------ >8 ------------------------ # Do not touch the line above. # Everything below will be removed. diff --git a/foo.txt b/foo.txt index 5716ca5..7601807 100644 --- a/foo.txt +++ b/foo.txt @@ -1 +1 @@ -bar +baz "git interpret-trailers" is unaware of the cut line, and assumes the trailer block would be at the end of the whole thing. This can easily be seen with: $ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \ git commit --amend -v Teach "git interpret-trailers" to notice the cut-line and ignore the remainder of the input when looking for a place to add new trailer block. This makes it consistent with how "git commit -v -s" inserts a new Signed-off-by: line. This can be done by the same logic as the existing helper function, wt_status_truncate_message_at_cut_line(), uses, but it wants the caller to pass a strbuf to it. Because the function ignore_non_trailer() used by the command takes a <pointer, length> pair, not a strbuf, steal the logic from wt_status_truncate_message_at_cut_line() to create a new wt_status_locate_end() helper function that takes <pointer, length> pair, and make ignore_non_trailer() call it to help "interpret-trailers". Since there is only one caller of wt_status_truncate_message_at_cut_line() in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead and remove the old helper that no longer has any caller. Signed-off-by: Brian Malehorn <bmalehorn@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-26Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZLibravatar brian m. carlson1-1/+1
Since we will likely be introducing a new hash function at some point, and that hash function might be longer than 20 bytes, use the constant GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead of GIT_SHA1_RAWSZ. This will ease the transition down the line by distinguishing between places where we need to allocate memory suitable for the largest hash from those where we need to handle the current hash. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-07wt-status: teach has_{unstaged,uncommitted}_changes() about submodulesLibravatar Johannes Schindelin1-3/+4
Sometimes we are *actually* interested in those changes... For example when an interactive rebase wants to continue with a staged submodule update. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-07wt-status: export also the has_un{staged,committed}_changes() functionsLibravatar Johannes Schindelin1-1/+3
They will be used in the upcoming rebase helper. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-07wt-status: make the require_clean_work_tree() function reusableLibravatar Johannes Schindelin1-0/+3
The function used by "git pull" to stop the user when the working tree has changes is useful in other places. Let's move it into a more prominent (and into an actually reusable) spot: wt-status.[ch]. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11status: print branch info with --porcelain=v2 --branchLibravatar Jeff Hostetler1-0/+1
Expand porcelain v2 output to include branch and tracking branch information. This includes the commit id, the branch, the upstream branch, and the ahead and behind counts. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11status: collect per-file data for --porcelain=v2Libravatar Jeff Hostetler1-0/+4
Collect extra per-file data for porcelain V2 format. The output of `git status --porcelain` leaves out many details about the current status that clients might like to have. This can force them to be less efficient as they may need to launch secondary commands (and try to match the logic within git) to accumulate this extra information. For example, a GUI IDE might want the file mode to display the correct icon for a changed item (without having to stat it afterwards). Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-05status: cleanup API to wt_status_printLibravatar Jeff Hostetler1-4/+12
Refactor the API between builtin/commit.c and wt-status.[ch]. Hide the details of the various wt_*status_print() routines inside wt-status.c behind a single (new) wt_status_print() routine. Eliminate the switch statements from builtin/commit.c. Allow details of new status formats to be isolated within wt-status.c Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-05status: rename long-format print routinesLibravatar Jeff Hostetler1-1/+1
Rename the various wt_status_print*() routines to be wt_longstatus_print*() to make it clear that these routines are only concerned with the normal/long status output and reduce developer confusion as other status formats are added in the future. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22wt-status.c: split bisect detection out of wt_status_get_state()Libravatar Nguyễn Thái Ngọc Duy1-0/+2
And make it work with any given worktree, in preparation for (again) find_shared_symref(). read_and_strip_branch() is deleted because it's no longer used. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22wt-status.c: make wt_status_check_rebase() work on any worktreeLibravatar Nguyễn Thái Ngọc Duy1-1/+4
This is a preparation step for find_shared_symref() to detect if any worktree is being rebased. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22wt-status.c: split rebase detection out of wt_status_get_state()Libravatar Nguyễn Thái Ngọc Duy1-0/+1
worktree.c:find_shared_symref() later needs to know if a branch is being rebased, and only rebase, no cherry-pick, do detached branch... Split this code so it can be used independently from other in-progress tests. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-21wt-status: move #include "pathspec.h" to the headerLibravatar SZEDER Gábor1-0/+1
The declaration of 'struct wt_status' requires the declararion of 'struct pathspec'. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-06wt-status: refactor detached HEAD analysisLibravatar Michael J Gruber1-0/+1
wt_status_print() is the only caller of wt_status_get_detached_from(). The latter performs most of the analysis of a detached HEAD, including finding state->detached_from; the caller checks whether the detached HEAD is still at state->detached_from or has moved away. Move that last bit of analysis to wt_status_get_detached_from(), too, and store the boolean result in state->detached_at. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31Merge branch 'mm/status-porcelain-format-i18n-fix'Libravatar Junio C Hamano1-0/+1
* mm/status-porcelain-format-i18n-fix: status: disable translation when --porcelain is used
2014-03-26status: disable translation when --porcelain is usedLibravatar Matthieu Moy1-0/+1
"git status --branch --porcelain" displays the status of the branch (ahead, behind, gone), and used gettext to translate the string. Use hardcoded strings when --porcelain is used, but keep the gettext translation for "git status --short" which is essentially the same, but meant to be read by a human. Reported-by: Anarky <ghostanarky@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18wt-status.c: move cut-line print code out to wt_status_add_cut_lineLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05commit -v: strip diffs and submodule shortlogs from the commit messageLibravatar Jens Lehmann1-0/+1
When using the '-v' option of "git commit" the diff added to the commit message temporarily for editing is stripped off after the user exited the editor by searching for "\ndiff --git " and truncating the commmit message there if it is found. But this approach has two problems: - when the commit message itself contains a line starting with "diff --git" it will be truncated there prematurely; and - when the "diff.submodule" setting is set to "log", the diff may start with "Submodule <hash1>..<hash2>", which will be left in the commit message while it shouldn't. Fix that by introducing a special scissor separator line starting with the comment character ('#' or the core.commentChar config if set) followed by two lines describing what it is for. The scissor line - which will not be translated - is used to reliably detect the start of the diff so it can be chopped off from the commit message, no matter what the user enters there. Turn a known test failure fixed by this change into a successful test; also add one for a diff starting with a submodule log and another one for proper handling of the comment char. Reported-by: Ari Pollak <ari@debian.org> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-11status: show commit sha1 in "You are currently cherry-picking" messageLibravatar Ralf Thielow1-0/+1
Especially helpful when cherry-picking multiple commits. Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-20Merge branch 'mm/commit-template-squelch-advice-messages'Libravatar Junio C Hamano1-0/+1
From the commit log template, remove irrelevant "advice" messages that are shared with "git status" output. * mm/commit-template-squelch-advice-messages: commit: disable status hints when writing to COMMIT_EDITMSG wt-status: turn advice_status_hints into a field of wt_status commit: factor status configuration is a helper function
2013-09-20Merge branch 'mm/status-without-comment-char'Libravatar Junio C Hamano1-0/+1
"git status" now omits the prefix to make its output a comment in a commit log editor, which is not necessary for human consumption. We may want to tighten the output to omit unnecessary trailing blank lines, but that does not have to be in the scope of this series. * mm/status-without-comment-char: t7508: avoid non-portable sed expression status: add missing blank line after list of "other" files tests: don't set status.displayCommentPrefix file-wide status: disable display of '#' comment prefix by default submodule summary: ignore --for-status option wt-status: use argv_array API builtin/stripspace.c: fix broken indentation
2013-09-12wt-status: turn advice_status_hints into a field of wt_statusLibravatar Matthieu Moy1-0/+1
No behavior change in this patch, but this makes the display of status hints more flexible as they can be enabled or disabled for individual calls to commit.c:run_status(). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-09Merge branch 'jl/submodule-mv'Libravatar Junio C Hamano1-1/+1
"git mv A B" when moving a submodule A does "the right thing", inclusing relocating its working tree and adjusting the paths in the .gitmodules file. * jl/submodule-mv: (53 commits) rm: delete .gitmodules entry of submodules removed from the work tree mv: update the path entry in .gitmodules for moved submodules submodule.c: add .gitmodules staging helper functions mv: move submodules using a gitfile mv: move submodules together with their work trees rm: do not set a variable twice without intermediate reading. t6131 - skip tests if on case-insensitive file system parse_pathspec: accept :(icase)path syntax pathspec: support :(glob) syntax pathspec: make --literal-pathspecs disable pathspec magic pathspec: support :(literal) syntax for noglob pathspec kill limit_pathspec_to_literal() as it's only used by parse_pathspec() parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN parse_pathspec: make sure the prefix part is wildcard-free rename field "raw" to "_raw" in struct pathspec tree-diff: remove the use of pathspec's raw[] in follow-rename codepath remove match_pathspec() in favor of match_pathspec_depth() remove init_pathspec() in favor of parse_pathspec() remove diff_tree_{setup,release}_paths convert common_prefix() to use struct pathspec ...
2013-09-06status: disable display of '#' comment prefix by defaultLibravatar Matthieu Moy1-0/+1
Historically, "git status" needed to prefix each output line with '#' so that the output could be added as comment to the commit message. This prefix comment has no real purpose when "git status" is ran from the command-line, and this may distract users from the real content. Disable this prefix comment by default, and make it re-activable for users needing backward compatibility with status.displayCommentPrefix. Obviously, "git commit" ignores status.displayCommentPrefix and keeps the comment unconditionnaly when writing to COMMIT_EDITMSG (but not when writing to stdout for an error message or with --dry-run). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15status: convert to use parse_pathspecLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09wt-status: use "format" function attribute for status_printfLibravatar Jeff King1-4/+4
These functions could benefit from the added compile-time safety of having the compiler check printf arguments. Unfortunately, we also sometimes pass an empty format string, which will cause false positives with -Wformat-zero-length. In this case, that warning is wrong because our function is not a no-op with an empty format: it may be printing colorized output along with a trailing newline. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-02status: show commit sha1 in "You are currently reverting" messageLibravatar Matthieu Moy1-0/+1
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>