summaryrefslogtreecommitdiff
path: root/wt-status.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09Merge branch 'jh/status-aheadbehind'Libravatar Junio C Hamano1-0/+17
"git status" can be told a non-standard default value for the "--[no-]ahead-behind" option with a new configuration variable status.aheadBehind. * jh/status-aheadbehind: status: ignore status.aheadbehind in porcelain formats status: warn when a/b calculation takes too long status: add status.aheadbehind setting
2019-07-09Merge branch 'nd/switch-and-restore'Libravatar Junio C Hamano1-7/+19
Two new commands "git switch" and "git restore" are introduced to split "checking out a branch to work on advancing its history" and "checking out paths out of the index and/or a tree-ish to work on advancing the current history" out of the single "git checkout" command. * nd/switch-and-restore: (46 commits) completion: disable dwim on "git switch -d" switch: allow to switch in the middle of bisect t2027: use test_must_be_empty Declare both git-switch and git-restore experimental help: move git-diff and git-reset to different groups doc: promote "git restore" user-manual.txt: prefer 'merge --abort' over 'reset --hard' completion: support restore t: add tests for restore restore: support --patch restore: replace --force with --ignore-unmerged restore: default to --source=HEAD when only --staged is specified restore: reject invalid combinations with --staged restore: add --worktree and --staged checkout: factor out worktree checkout code restore: disable overlay mode by default restore: make pathspec mandatory restore: take tree-ish from --source option instead checkout: split part of it to new command 'restore' doc: promote "git switch" ...
2019-07-09Merge branch 'md/sort-detached-head-first'Libravatar Junio C Hamano1-2/+2
"git branch --list" learned to always output the detached HEAD as the first item (when the HEAD is detached, of course), regardless of the locale. * md/sort-detached-head-first: ref-filter: sort detached HEAD lines firstly
2019-06-21status: warn when a/b calculation takes too longLibravatar Jeff Hostetler1-0/+17
The ahead/behind calculation in 'git status' can be slow in some cases. Users may not realize that there are ways to avoid this computation, especially if they are not using the information. Add a warning that appears if this calculation takes more than two seconds. The warning can be disabled through the new config setting advice.statusAheadBehind. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19ref-filter: sort detached HEAD lines firstlyLibravatar Matthew DeVore1-2/+2
Before this patch, "git branch" would put "(HEAD detached...)" and "(no branch, rebasing...)" lines before all the other branches *in most cases* except for when using Chinese-language messages. zh_CN generally uses a full-width "(" symbol (codepoint FF08) to match the full-width proportions of Chinese characters, and the translated strings we had did use them. This meant that the detached HEAD line would appear after all local refs and even after the remote refs if there were any. AFAIK, it is sometimes not jarring to see the half-width parenthesis in "full-width" text as in the CJK languages, for instance when there are no characters preceding or following the parenthesized text fragment. By removing the parenthesis from the localizable text, we can share strings with wt-status.c and remove a cautionary comment to translators. Remove the ( from the localizable portion of messages so the sorting happens properly regardless of locale. Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-13Merge branch 'jk/unused-params-final-batch'Libravatar Junio C Hamano1-4/+2
* jk/unused-params-final-batch: verify-commit: simplify parameters to run_gpg_verify() show-branch: drop unused parameter from show_independent() rev-list: drop unused void pointer from finish_commit() remove_all_fetch_refspecs(): drop unused "remote" parameter receive-pack: drop unused "commands" from prepare_shallow_update() pack-objects: drop unused rev_info parameters name-rev: drop unused parameters from is_better_name() mktree: drop unused length parameter wt-status: drop unused status parameter read-cache: drop unused parameter from threaded load clone: drop dest parameter from copy_alternates() submodule: drop unused prefix parameter from some functions builtin: consistently pass cmd_* prefix to parse_options cmd_{read,write}_tree: rename "unused" variable that is used
2019-05-19Merge branch 'js/rebase-i-label-shown-in-status-fix'Libravatar Junio C Hamano1-1/+3
"git status" did not know that the "label" instruction in the todo-list "rebase -i -r" uses should not be shown as a hex object name. * js/rebase-i-label-shown-in-status-fix: status: fix display of rebase -ir's `label` command
2019-05-13Merge branch 'pw/clean-sequencer-state-upon-final-commit'Libravatar Junio C Hamano1-5/+34
"git chery-pick" (and "revert" that shares the same runtime engine) that deals with multiple commits got confused when the final step gets stopped with a conflict and the user concluded the sequence with "git commit". Attempt to fix it by cleaning up the state files used by these commands in such a situation. * pw/clean-sequencer-state-upon-final-commit: fix cherry-pick/revert status after commit commit/reset: try to clean up sequencer state
2019-05-13status: fix display of rebase -ir's `label` commandLibravatar Johannes Schindelin1-1/+3
The argument of a `label` command does *not* want to be turned into an abbreviated SHA-1. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-13wt-status: drop unused status parameterLibravatar Jeff King1-4/+2
The v2_fix_up_changed() function doesn't actually need to see the wt_status struct. It's possible that could change in the future, but this is a static-local function with one caller. It would be easy to read-add it back then. Let's drop the unused parameter. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-09Merge branch 'dr/ref-filter-push-track-fix'Libravatar Junio C Hamano1-2/+2
%(push:track) token used in the --format option to "git for-each-ref" and friends was not showing the right branch, which has been fixed. * dr/ref-filter-push-track-fix: ref-filter: use correct branch for %(push:track)
2019-05-07doc: promote "git restore"Libravatar Nguyễn Thái Ngọc Duy1-7/+19
The new command "git restore" (together with "git switch") are added to avoid the confusion of one-command-do-all "git checkout" for new users. They are also helpful to avoid ambiguous context. For these reasons, promote it everywhere possible. This includes documentation, suggestions/advice from other commands. One nice thing about git-restore is the ability to restore "everything", so it can be used in "git status" advice instead of both "git checkout" and "git reset". The three commands suggested by "git status" are add, rm and restore. "git checkout" is also removed from "git help" (i.e. it's no longer considered a commonly used command) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-18merge: cleanup messages like commitLibravatar Denton Liu1-3/+9
This change allows git-merge messages to be cleaned up with the commit.cleanup configuration or --cleanup option, just like how git-commit does it. We also give git-pull the option of --cleanup so that it can also take advantage of this change. Finally, add testing to ensure that messages are properly cleaned up. Note that some newlines that were added to the commit message were removed so that if a file were read via -F, it would be copied faithfully. Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-18ref-filter: use correct branch for %(push:track)Libravatar Damien Robert1-2/+2
In ref-filter.c, when processing the atom %(push:track), the ahead/behind values are computed using `stat_tracking_info` which refers to the upstream branch. Fix that by introducing a new flag `for_push` in `stat_tracking_info` in remote.c, which does the same thing but for the push branch. Update the few callers of `stat_tracking_info` to handle this flag. This ensure that whenever we use this function in the future, we are careful to specify is this should apply to the upstream or the push branch. This bug was not detected in t/t6300-for-each-ref.sh because in the test for push:track, both the upstream and the push branches were behind by 1 from the local branch. Change the test so that the upstream branch is behind by 1 while the push branch is ahead by 1. This allows us to test that %(push:track) refers to the correct branch. This changes the expected value of some following tests (by introducing new references), so update them too. Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-17fix cherry-pick/revert status after commitLibravatar Phillip Wood1-5/+34
If the user commits a conflict resolution using `git commit` in the middle of a sequence of cherry-picks/reverts then `git status` missed the fact that a cherry-pick/revert is still in progress. Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-22trace2:data: add trace2 regions to wt-statusLibravatar Jeff Hostetler1-2/+22
Add trace2_region_enter() and trace2_region_leave() calls around the various phases of a status scan. This gives elapsed time for each phase in the GIT_TR2_PERF and GIT_TR2_EVENT trace target. Also, these Trace2 calls now use s->repo rather than the_repository. Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14read-cache.c: replace update_index_if_able with repo_&Libravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14repository.c: replace hold_locked_index() with repo_hold_locked_index()Libravatar Nguyễn Thái Ngọc Duy1-1/+1
hold_locked_index() assumes the index path at $GIT_DIR/index. This is not good for places that take an arbitrary index_state instead of the_index, which is basically everywhere except builtin/. Replace it with repo_hold_locked_index(). hold_locked_index() remains as a wrapper around repo_hold_locked_index() to reduce changes in builtin/ Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-04Merge branch 'nd/the-index'Libravatar Junio C Hamano1-41/+53
More codepaths become aware of working with in-core repository instance other than the default "the_repository". * nd/the-index: (22 commits) rebase-interactive.c: remove the_repository references rerere.c: remove the_repository references pack-*.c: remove the_repository references pack-check.c: remove the_repository references notes-cache.c: remove the_repository references line-log.c: remove the_repository reference diff-lib.c: remove the_repository references delta-islands.c: remove the_repository references cache-tree.c: remove the_repository references bundle.c: remove the_repository references branch.c: remove the_repository reference bisect.c: remove the_repository reference blame.c: remove implicit dependency the_repository sequencer.c: remove implicit dependency on the_repository sequencer.c: remove implicit dependency on the_index transport.c: remove implicit dependency on the_index notes-merge.c: remove implicit dependency the_repository notes-merge.c: remove implicit dependency on the_index list-objects.c: reduce the_repository references list-objects-filter.c: remove implicit dependency on the_index ...
2018-11-13status: rebase and merge can be in progress at the same timeLibravatar Johannes Schindelin1-2/+7
Since `git rebase -r` was introduced, that is possible. But our machinery did not think that possible, and failed to say anything about the rebase in progress when in the middle of a merge. Let's work around that in the minimal fashion. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12wt-status.c: remove implicit dependency the_repositoryLibravatar Nguyễn Thái Ngọc Duy1-8/+10
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12wt-status.c: remove implicit dependency on the_indexLibravatar Nguyễn Thái Ngọc Duy1-33/+43
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-19Merge branch 'ss/wt-status-committable'Libravatar Junio C Hamano1-89/+82
Code clean-up in the internal machinery used by "git status" and "git commit --dry-run". * ss/wt-status-committable: roll wt_status_state into wt_status and populate in the collect phase wt-status.c: set the committable flag in the collect phase t7501: add test of "commit --dry-run --short" wt-status: rename commitable to committable wt-status.c: move has_unmerged earlier in the file
2018-10-19Merge branch 'nd/the-index'Libravatar Junio C Hamano1-5/+5
Various codepaths in the core-ish part learn to work on an arbitrary in-core index structure, not necessarily the default instance "the_index". * nd/the-index: (23 commits) revision.c: reduce implicit dependency the_repository revision.c: remove implicit dependency on the_index ws.c: remove implicit dependency on the_index tree-diff.c: remove implicit dependency on the_index submodule.c: remove implicit dependency on the_index line-range.c: remove implicit dependency on the_index userdiff.c: remove implicit dependency on the_index rerere.c: remove implicit dependency on the_index sha1-file.c: remove implicit dependency on the_index patch-ids.c: remove implicit dependency on the_index merge.c: remove implicit dependency on the_index merge-blobs.c: remove implicit dependency on the_index ll-merge.c: remove implicit dependency on the_index diff-lib.c: remove implicit dependency on the_index read-cache.c: remove implicit dependency on the_index diff.c: remove implicit dependency on the_index grep.c: remove implicit dependency on the_index diff.c: remove the_index dependency in textconv() functions blame.c: rename "repo" argument to "r" combine-diff.c: remove implicit dependency on the_index ...
2018-10-03roll wt_status_state into wt_status and populate in the collect phaseLibravatar Stephen P. Smith1-75/+59
Status variables were initialized in the collect phase and some variables were later freed in the print functions. A "struct wt_status" used to be sufficient for the output phase to work. It was designed to be filled in the collect phase and consumed in the output phase, but over time some fields were added and output phase started filling the fields. A "struct wt_status_state" that was used in other codepaths turned out to be useful in the "git status" output. This is not tied to "struct wt_status", so filling in the collect phase was not consistently followed. Move the status state structure variables into the status state structure and populate them in the collect functions. Create a new function to free the buffers that were being freed in the print function. Call this new function in commit.c where both the collect and print functions were being called. Based on a patch suggestion by Junio C Hamano. [1] [1] https://public-inbox.org/git/xmqqr2i5ueg4.fsf@gitster-ct.c.googlers.com/ Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21revision.c: remove implicit dependency on the_indexLibravatar Nguyễn Thái Ngọc Duy1-5/+5
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-07wt-status.c: set the committable flag in the collect phaseLibravatar Stephen P. Smith1-2/+11
In an update to fix a bug with "commit --dry-run" it was found that the committable flag was broken. The update was, at the time, accepted as it was better than the previous version. [1] Since the setting of the committable flag had been done in wt_longstatus_print_updated, move it to wt_status_collect_updated_cb. Set the committable flag in wt_status_collect_changes_initial to keep from introducing a rebase regression. Instead of setting the committable flag in show_merge_in_progress, in wt_status_cllect check for a merge that has not been committed. If present then set the committable flag. Change the tests to expect success since updates to the wt-status broken code section is being fixed. [1] https://public-inbox.org/git/xmqqr3gcj9i5.fsf@gitster.mtv.corp.google.com/ Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-07wt-status: rename commitable to committableLibravatar Stephen P. Smith1-5/+5
Fix variable spelling error. Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-07wt-status.c: move has_unmerged earlier in the fileLibravatar Stephen P. Smith1-13/+13
Move has_unmerged() up in the file so that it can be called in wt_status_collect() where we need to place a merge check. Signed-off-by: Stephen P. Smith <ischis2@cox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29convert "oidcmp() == 0" to oideq()Libravatar Jeff King1-5/+5
Using the more restrictive oideq() should, in the long run, give the compiler more opportunities to optimize these callsites. For now, this conversion should be a complete noop with respect to the generated code. The result is also perhaps a little more readable, as it avoids the "zero is equal" idiom. Since it's so prevalent in C, I think seasoned programmers tend not to even notice it anymore, but it can sometimes make for awkward double negations (e.g., we can drop a few !!oidcmp() instances here). This patch was generated almost entirely by the included coccinelle patch. This mechanical conversion should be completely safe, because we check explicitly for cases where oidcmp() is compared to 0, which is what oideq() is doing under the hood. Note that we don't have to catch "!oidcmp()" separately; coccinelle's standard isomorphisms make sure the two are treated equivalently. I say "almost" because I did hand-edit the coccinelle output to fix up a few style violations (it mostly keeps the original formatting, but sometimes unwraps long lines). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13dir.c: remove an implicit dependency on the_index in pathspec codeLibravatar Nguyễn Thái Ngọc Duy1-3/+3
Make the match_patchspec API and friends take an index_state instead of assuming the_index in dir.c. All external call sites are converted blindly to keep the patch simple and retain current behavior. Individual call sites may receive further updates to use the right index instead of the_index. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-02Merge branch 'sb/object-store-lookup'Libravatar Junio C Hamano1-2/+2
lookup_commit_reference() and friends have been updated to find in-core object for a specific in-core repository instance. * sb/object-store-lookup: (32 commits) commit.c: allow lookup_commit_reference to handle arbitrary repositories commit.c: allow lookup_commit_reference_gently to handle arbitrary repositories tag.c: allow deref_tag to handle arbitrary repositories object.c: allow parse_object to handle arbitrary repositories object.c: allow parse_object_buffer to handle arbitrary repositories commit.c: allow get_cached_commit_buffer to handle arbitrary repositories commit.c: allow set_commit_buffer to handle arbitrary repositories commit.c: migrate the commit buffer to the parsed object store commit-slabs: remove realloc counter outside of slab struct commit.c: allow parse_commit_buffer to handle arbitrary repositories tag: allow parse_tag_buffer to handle arbitrary repositories tag: allow lookup_tag to handle arbitrary repositories commit: allow lookup_commit to handle arbitrary repositories tree: allow lookup_tree to handle arbitrary repositories blob: allow lookup_blob to handle arbitrary repositories object: allow lookup_object to handle arbitrary repositories object: allow object_as_type to handle arbitrary repositories tag: add repository argument to deref_tag tag: add repository argument to parse_tag_buffer tag: add repository argument to lookup_tag ...
2018-08-02Merge branch 'jk/has-uncommitted-changes-fix'Libravatar Junio C Hamano1-0/+10
"git pull --rebase" on a corrupt HEAD caused a segfault. In general we substitute an empty tree object when running the in-core equivalent of the diff-index command, and the codepath has been corrected to do so as well to fix this issue. * jk/has-uncommitted-changes-fix: has_uncommitted_changes(): fall back to empty tree
2018-07-18Merge branch 'sb/object-store-grafts'Libravatar Junio C Hamano1-4/+4
The conversion to pass "the_repository" and then "a_repository" throughout the object access API continues. * sb/object-store-grafts: commit: allow lookup_commit_graft to handle arbitrary repositories commit: allow prepare_commit_graft to handle arbitrary repositories shallow: migrate shallow information into the object parser path.c: migrate global git_path_* to take a repository argument cache: convert get_graft_file to handle arbitrary repositories commit: convert read_graft_file to handle arbitrary repositories commit: convert register_commit_graft to handle arbitrary repositories commit: convert commit_graft_pos() to handle arbitrary repositories shallow: add repository argument to is_repository_shallow shallow: add repository argument to check_shallow_file_for_update shallow: add repository argument to register_shallow shallow: add repository argument to set_alternate_shallow_file commit: add repository argument to lookup_commit_graft commit: add repository argument to prepare_commit_graft commit: add repository argument to read_graft_file commit: add repository argument to register_commit_graft commit: add repository argument to commit_graft_pos object: move grafts to object parser object-store: move object access functions to object-store.h
2018-07-11has_uncommitted_changes(): fall back to empty treeLibravatar Jeff King1-0/+10
If has_uncommitted_changes() can't resolve HEAD (e.g., because it's unborn or corrupt), then we end up calling run_diff_index() with an empty revs.pending array. This causes a segfault, as run_diff_index() blindly looks at the first pending item. Fixing this raises a question of fault: should run_diff_index() handle this case, or is the caller wrong to pass an empty pending list? Looking at the other callers of run_diff_index(), they handle this in one of three ways: - they resolve the object themselves, and avoid doing the diff if it's not valid - they resolve the object themselves, and fall back to the empty tree - they use setup_revisions(), which will die() if the object isn't valid Since this is the only broken caller, that argues that the fix should go there. Falling back to the empty tree makes sense here, as we'd claim uncommitted changes if and only if the index is non-empty. This may be a little funny in the case of corruption (the corrupt HEAD probably _isn't_ empty), but: - we don't actually know the reason here that HEAD didn't resolve (the much more likely case is that we have an unborn HEAD, in which case the empty tree comparison is the right thing) - this matches how other code, like "git diff", behaves While we're thinking about it, let's add an assertion to run_diff_index(). It should always be passed a single object, and as this bug shows, it's easy to get it wrong (and an assertion is easier to hunt down than a segfault, or a quietly ignored extra tree). Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29commit: add repository argument to lookup_commit_reference_gentlyLibravatar Stefan Beller1-1/+1
Add a repository argument to allow callers of lookup_commit_reference_gently to be more specific about which repository to handle. This is a small mechanical change; it doesn't change the implementation to handle repositories other than the_repository yet. As with the previous commits, use a macro to catch callers passing a repository other than the_repository at compile time. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29Merge branch 'sb/object-store-grafts' into sb/object-store-lookupLibravatar Junio C Hamano1-4/+4
* sb/object-store-grafts: commit: allow lookup_commit_graft to handle arbitrary repositories commit: allow prepare_commit_graft to handle arbitrary repositories shallow: migrate shallow information into the object parser path.c: migrate global git_path_* to take a repository argument cache: convert get_graft_file to handle arbitrary repositories commit: convert read_graft_file to handle arbitrary repositories commit: convert register_commit_graft to handle arbitrary repositories commit: convert commit_graft_pos() to handle arbitrary repositories shallow: add repository argument to is_repository_shallow shallow: add repository argument to check_shallow_file_for_update shallow: add repository argument to register_shallow shallow: add repository argument to set_alternate_shallow_file commit: add repository argument to lookup_commit_graft commit: add repository argument to prepare_commit_graft commit: add repository argument to read_graft_file commit: add repository argument to register_commit_graft commit: add repository argument to commit_graft_pos object: move grafts to object parser object-store: move object access functions to object-store.h
2018-05-30Merge branch 'bc/object-id'Libravatar Junio C Hamano1-2/+2
Conversion from uchar[20] to struct object_id continues. * bc/object-id: (42 commits) merge-one-file: compute empty blob object ID add--interactive: compute the empty tree value Update shell scripts to compute empty tree object ID sha1_file: only expose empty object constants through git_hash_algo dir: use the_hash_algo for empty blob object ID sequencer: use the_hash_algo for empty tree object ID cache-tree: use is_empty_tree_oid sha1_file: convert cached object code to struct object_id builtin/reset: convert use of EMPTY_TREE_SHA1_BIN builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX wt-status: convert two uses of EMPTY_TREE_SHA1_HEX submodule: convert several uses of EMPTY_TREE_SHA1_HEX sequencer: convert one use of EMPTY_TREE_SHA1_HEX merge: convert empty tree constant to the_hash_algo builtin/merge: switch tree functions to use object_id builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo sha1-file: add functions for hex empty tree and blob OIDs builtin/receive-pack: avoid hard-coded constants for push certs diff: specify abbreviation size in terms of the_hash_algo upload-pack: replace use of several hard-coded constants ...
2018-05-30Merge branch 'bp/status-rename-config'Libravatar Junio C Hamano1-0/+12
"git status" learned to honor a new status.renames configuration to skip rename detection, which could be useful for those who want to do so without disabling the default rename detection done by the "git diff" command. * bp/status-rename-config: add status config and command line options for rename detection
2018-05-30Merge branch 'js/use-bug-macro'Libravatar Junio C Hamano1-10/+10
Developer support update, by using BUG() macro instead of die() to mark codepaths that should not happen more clearly. * js/use-bug-macro: BUG_exit_code: fix sparse "symbol not declared" warning Convert remaining die*(BUG) messages Replace all die("BUG: ...") calls by BUG() ones run-command: use BUG() to report bugs, not die() test-tool: help verifying BUG() code paths
2018-05-18path.c: migrate global git_path_* to take a repository argumentLibravatar Stefan Beller1-4/+4
Migrate all git_path_* functions that are defined in path.c to take a repository argument. Unlike other patches in this series, do not use the #define trick, as we rewrite the whole function, which is rather small. This doesn't migrate all the functions, as other builtins have their own local path functions defined using GIT_PATH_FUNC. So keep that macro around to serve the other locations. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-13add status config and command line options for rename detectionLibravatar Ben Peart1-0/+12
After performing a merge that has conflicts git status will, by default, attempt to detect renames which causes many objects to be examined. In a virtualized repo, those objects do not exist locally so the rename logic triggers them to be fetched from the server. This results in the status call taking hours to complete on very large repos vs seconds with this patch. Add a new config status.renames setting to enable turning off rename detection during status and commit. This setting will default to the value of diff.renames. Add a new config status.renamelimit setting to to enable bounding the time spent finding out inexact renames during status and commit. This setting will default to the value of diff.renamelimit. Add --no-renames command line option to status that enables overriding the config setting from the command line. Add --find-renames[=<n>] command line option to status that enables detecting renames and optionally setting the similarity index. Reviewed-by: Elijah Newren <newren@gmail.com> Original-Patch-by: Alejandro Pauly <alpauly@microsoft.com> Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-06Replace all die("BUG: ...") calls by BUG() onesLibravatar Johannes Schindelin1-10/+10
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro was introduced to use for reporting bugs instead of die(). It was then subsequently used to convert one single caller in 588a538ae55 (setup_git_env: convert die("BUG") to BUG(), 2017-05-12). The cover letter of the patch series containing this patch (cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not terribly clear why only one call site was converted, or what the plan is for other, similar calls to die() to report bugs. Let's just convert all remaining ones in one fell swoop. This trick was performed by this invocation: sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-06wt-status: use settings from git_diff_ui_configLibravatar Eckhard S. Maaß1-4/+0
If you do something like - git add . - git status - git commit - git show (or git diff HEAD) one would expect to have analogous output from git status and git show (or similar diff-related programs). This is generally not the case, as git status has hard coded values for diff related options. With this commit the hard coded settings are dropped from the status command in favour for values provided by git_diff_ui_config. What follows are some remarks on the concrete options which were hard coded in git status: diffopt.detect_rename Since the very beginning of git status in a3e870f2e2 ("Add "commit" helper script", 2005-05-30), git status always used rename detection, whereas with commands like show and log one had to activate it with a command line option. After 5404c116aa ("diff: activate diff.renames by default", 2016-02-25) the default behaves the same by coincidence, but changing diff.renames to other values can break the consistency between git status and other commands again. With this commit one control the same default behaviour with diff.renames. diffopt.rename_limit Similarly one has the option diff.renamelimit to adjust this limit for all commands but git status. With this commit git status will also honor those. diffopt.break_opt Unlike the other two options this cannot be configured by a configuration option yet. This commit will also change the default behaviour to not use break rewrites. But as rename detection is most likely on, this is dangerous to be activated anyway as one can see here: https://public-inbox.org/git/xmqqegqaahnh.fsf@gitster.dls.corp.google.com/ Signed-off-by: Eckhard S. Maaß <eckhard.s.maass@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02wt-status: convert two uses of EMPTY_TREE_SHA1_HEXLibravatar brian m. carlson1-2/+2
Convert two uses of EMPTY_TREE_SHA1_HEX to use empty_tree_oid_hex to avoid a dependency on a given hash algorithm. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14Convert find_unique_abbrev* to struct object_idLibravatar brian m. carlson1-3/+3
Convert find_unique_abbrev and find_unique_abbrev_r to each take a pointer to struct object_id. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14wt-status: convert struct wt_status_state to object_idLibravatar brian m. carlson1-6/+6
Convert the various *_sha1 members to use struct object_id instead. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14strbuf: convert strbuf_add_unique_abbrev to use struct object_idLibravatar brian m. carlson1-3/+3
Convert the declaration and definition of strbuf_add_unique_abbrev to make it take a pointer to struct object_id. Predeclare the struct in strbuf.h, as cache.h includes strbuf.h before it declares the struct, and otherwise the struct declaration would have the wrong scope. Apply the following semantic patch, along with the standard object_id transforms, to adjust the callers: @@ expression E1, E2, E3; @@ - strbuf_add_unique_abbrev(E1, E2.hash, E3); + strbuf_add_unique_abbrev(E1, &E2, E3); @@ expression E1, E2, E3; @@ - strbuf_add_unique_abbrev(E1, E2->hash, E3); + strbuf_add_unique_abbrev(E1, E2, E3); Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-08Merge branch 'jh/status-no-ahead-behind'Libravatar Junio C Hamano1-12/+29
"git status" can spend a lot of cycles to compute the relation between the current branch and its upstream, which can now be disabled with "--no-ahead-behind" option. * jh/status-no-ahead-behind: status: support --no-ahead-behind in long format status: update short status to respect --no-ahead-behind status: add --[no-]ahead-behind to status and commit for V2 format. stat_tracking_info: return +1 when branches not equal
2018-02-27Merge branch 'nd/ita-wt-renames-in-status' into maintLibravatar Junio C Hamano1-30/+53
"git status" after moving a path in the working tree (hence making it appear "removed") and then adding with the -N option (hence making that appear "added") detected it as a rename, but did not report the old and new pathnames correctly. * nd/ita-wt-renames-in-status: wt-status.c: handle worktree renames wt-status.c: rename rename-related fields in wt_status_change_data wt-status.c: catch unhandled diff status codes wt-status.c: coding style fix Use DIFF_DETECT_RENAME for detect_rename assignments t2203: test status output with porcelain v2 format