| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Extra blank lines in "git status" output have been reduced.
* jl/status-reduce-vertical-blank:
status: remove the empty line after hints
|
|
"git status" can be told a non-standard default value for the
"--[no-]ahead-behind" option with a new configuration variable
status.aheadBehind.
* jh/status-aheadbehind:
status: ignore status.aheadbehind in porcelain formats
status: warn when a/b calculation takes too long
status: add status.aheadbehind setting
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
"git branch --list" learned to always output the detached HEAD as
the first item (when the HEAD is detached, of course), regardless
of the locale.
* md/sort-detached-head-first:
ref-filter: sort detached HEAD lines firstly
|
|
The ahead/behind calculation in 'git status' can be slow in some
cases. Users may not realize that there are ways to avoid this
computation, especially if they are not using the information.
Add a warning that appears if this calculation takes more than
two seconds. The warning can be disabled through the new config
setting advice.statusAheadBehind.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before this patch, there is inconsistency between the status
messages with hints and the ones without hints: there is an
empty line between the title and the file list if hints are
presented, but there isn't one if there are no hints.
This patch remove the inconsistency by removing the empty
lines even if hints are presented.
Signed-off-by: John Lin <johnlinp@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before this patch, "git branch" would put "(HEAD detached...)" and "(no
branch, rebasing...)" lines before all the other branches *in most
cases* except for when using Chinese-language messages. zh_CN generally
uses a full-width "(" symbol (codepoint FF08) to match the full-width
proportions of Chinese characters, and the translated strings we had did
use them. This meant that the detached HEAD line would appear after all
local refs and even after the remote refs if there were any.
AFAIK, it is sometimes not jarring to see the half-width parenthesis in
"full-width" text as in the CJK languages, for instance when there are
no characters preceding or following the parenthesized text fragment. By
removing the parenthesis from the localizable text, we can share strings
with wt-status.c and remove a cautionary comment to translators.
Remove the ( from the localizable portion of messages so the sorting
happens properly regardless of locale.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
|
|
"git status" did not know that the "label" instruction in the
todo-list "rebase -i -r" uses should not be shown as a hex object
name.
* js/rebase-i-label-shown-in-status-fix:
status: fix display of rebase -ir's `label` command
|
|
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
|
|
The argument of a `label` command does *not* want to be turned into an
abbreviated SHA-1.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The v2_fix_up_changed() function doesn't actually need to see the
wt_status struct. It's possible that could change in the future, but
this is a static-local function with one caller. It would be easy to
read-add it back then. Let's drop the unused parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
%(push:track) token used in the --format option to "git
for-each-ref" and friends was not showing the right branch, which
has been fixed.
* dr/ref-filter-push-track-fix:
ref-filter: use correct branch for %(push:track)
|
|
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change allows git-merge messages to be cleaned up with the
commit.cleanup configuration or --cleanup option, just like how
git-commit does it.
We also give git-pull the option of --cleanup so that it can also take
advantage of this change.
Finally, add testing to ensure that messages are properly cleaned up.
Note that some newlines that were added to the commit message were
removed so that if a file were read via -F, it would be copied
faithfully.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In ref-filter.c, when processing the atom %(push:track), the
ahead/behind values are computed using `stat_tracking_info` which refers
to the upstream branch.
Fix that by introducing a new flag `for_push` in `stat_tracking_info`
in remote.c, which does the same thing but for the push branch.
Update the few callers of `stat_tracking_info` to handle this flag. This
ensure that whenever we use this function in the future, we are careful
to specify is this should apply to the upstream or the push branch.
This bug was not detected in t/t6300-for-each-ref.sh because in the test
for push:track, both the upstream and the push branches were behind by 1
from the local branch. Change the test so that the upstream branch is
behind by 1 while the push branch is ahead by 1. This allows us to test
that %(push:track) refers to the correct branch.
This changes the expected value of some following tests (by introducing
new references), so update them too.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user commits a conflict resolution using `git commit` in the
middle of a sequence of cherry-picks/reverts then `git status` missed
the fact that a cherry-pick/revert is still in progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add trace2_region_enter() and trace2_region_leave() calls around the
various phases of a status scan. This gives elapsed time for each
phase in the GIT_TR2_PERF and GIT_TR2_EVENT trace target.
Also, these Trace2 calls now use s->repo rather than the_repository.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hold_locked_index() assumes the index path at $GIT_DIR/index. This is
not good for places that take an arbitrary index_state instead of
the_index, which is basically everywhere except builtin/.
Replace it with repo_hold_locked_index(). hold_locked_index() remains
as a wrapper around repo_hold_locked_index() to reduce changes in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More codepaths become aware of working with in-core repository
instance other than the default "the_repository".
* nd/the-index: (22 commits)
rebase-interactive.c: remove the_repository references
rerere.c: remove the_repository references
pack-*.c: remove the_repository references
pack-check.c: remove the_repository references
notes-cache.c: remove the_repository references
line-log.c: remove the_repository reference
diff-lib.c: remove the_repository references
delta-islands.c: remove the_repository references
cache-tree.c: remove the_repository references
bundle.c: remove the_repository references
branch.c: remove the_repository reference
bisect.c: remove the_repository reference
blame.c: remove implicit dependency the_repository
sequencer.c: remove implicit dependency on the_repository
sequencer.c: remove implicit dependency on the_index
transport.c: remove implicit dependency on the_index
notes-merge.c: remove implicit dependency the_repository
notes-merge.c: remove implicit dependency on the_index
list-objects.c: reduce the_repository references
list-objects-filter.c: remove implicit dependency on the_index
...
|
|
Since `git rebase -r` was introduced, that is possible. But our
machinery did not think that possible, and failed to say anything about
the rebase in progress when in the middle of a merge.
Let's work around that in the minimal fashion.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
Status variables were initialized in the collect phase and some
variables were later freed in the print functions.
A "struct wt_status" used to be sufficient for the output phase to
work. It was designed to be filled in the collect phase and consumed
in the output phase, but over time some fields were added and output
phase started filling the fields.
A "struct wt_status_state" that was used in other codepaths turned out
to be useful in the "git status" output. This is not tied to "struct
wt_status", so filling in the collect phase was not consistently
followed.
Move the status state structure variables into the status state
structure and populate them in the collect functions.
Create a new function to free the buffers that were being freed in the
print function. Call this new function in commit.c where both the
collect and print functions were being called.
Based on a patch suggestion by Junio C Hamano. [1]
[1] https://public-inbox.org/git/xmqqr2i5ueg4.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an update to fix a bug with "commit --dry-run" it was found that
the committable flag was broken. The update was, at the time, accepted
as it was better than the previous version. [1]
Since the setting of the committable flag had been done in
wt_longstatus_print_updated, move it to wt_status_collect_updated_cb.
Set the committable flag in wt_status_collect_changes_initial to keep
from introducing a rebase regression.
Instead of setting the committable flag in show_merge_in_progress, in
wt_status_cllect check for a merge that has not been committed. If
present then set the committable flag.
Change the tests to expect success since updates to the wt-status
broken code section is being fixed.
[1] https://public-inbox.org/git/xmqqr3gcj9i5.fsf@gitster.mtv.corp.google.com/
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix variable spelling error.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move has_unmerged() up in the file so that it can be called in
wt_status_collect() where we need to place a merge check.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
lookup_commit_reference() and friends have been updated to find
in-core object for a specific in-core repository instance.
* sb/object-store-lookup: (32 commits)
commit.c: allow lookup_commit_reference to handle arbitrary repositories
commit.c: allow lookup_commit_reference_gently to handle arbitrary repositories
tag.c: allow deref_tag to handle arbitrary repositories
object.c: allow parse_object to handle arbitrary repositories
object.c: allow parse_object_buffer to handle arbitrary repositories
commit.c: allow get_cached_commit_buffer to handle arbitrary repositories
commit.c: allow set_commit_buffer to handle arbitrary repositories
commit.c: migrate the commit buffer to the parsed object store
commit-slabs: remove realloc counter outside of slab struct
commit.c: allow parse_commit_buffer to handle arbitrary repositories
tag: allow parse_tag_buffer to handle arbitrary repositories
tag: allow lookup_tag to handle arbitrary repositories
commit: allow lookup_commit to handle arbitrary repositories
tree: allow lookup_tree to handle arbitrary repositories
blob: allow lookup_blob to handle arbitrary repositories
object: allow lookup_object to handle arbitrary repositories
object: allow object_as_type to handle arbitrary repositories
tag: add repository argument to deref_tag
tag: add repository argument to parse_tag_buffer
tag: add repository argument to lookup_tag
...
|
|
"git pull --rebase" on a corrupt HEAD caused a segfault. In
general we substitute an empty tree object when running the in-core
equivalent of the diff-index command, and the codepath has been
corrected to do so as well to fix this issue.
* jk/has-uncommitted-changes-fix:
has_uncommitted_changes(): fall back to empty tree
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
If has_uncommitted_changes() can't resolve HEAD (e.g.,
because it's unborn or corrupt), then we end up calling
run_diff_index() with an empty revs.pending array. This
causes a segfault, as run_diff_index() blindly looks at the
first pending item.
Fixing this raises a question of fault: should
run_diff_index() handle this case, or is the caller wrong to
pass an empty pending list?
Looking at the other callers of run_diff_index(), they
handle this in one of three ways:
- they resolve the object themselves, and avoid doing the
diff if it's not valid
- they resolve the object themselves, and fall back to the
empty tree
- they use setup_revisions(), which will die() if the
object isn't valid
Since this is the only broken caller, that argues that the
fix should go there. Falling back to the empty tree makes
sense here, as we'd claim uncommitted changes if and only if
the index is non-empty. This may be a little funny in the
case of corruption (the corrupt HEAD probably _isn't_
empty), but:
- we don't actually know the reason here that HEAD didn't
resolve (the much more likely case is that we have an
unborn HEAD, in which case the empty tree comparison is
the right thing)
- this matches how other code, like "git diff", behaves
While we're thinking about it, let's add an assertion to
run_diff_index(). It should always be passed a single
object, and as this bug shows, it's easy to get it wrong
(and an assertion is easier to hunt down than a segfault, or
a quietly ignored extra tree).
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of
lookup_commit_reference_gently to be more specific about which
repository to handle. This is a small mechanical change; it doesn't
change the implementation to handle repositories other than
the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
|
|
"git status" learned to honor a new status.renames configuration to
skip rename detection, which could be useful for those who want to
do so without disabling the default rename detection done by the
"git diff" command.
* bp/status-rename-config:
add status config and command line options for rename detection
|
|
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
|
|
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
#define trick, as we rewrite the whole function, which is rather small.
This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After performing a merge that has conflicts git status will, by default,
attempt to detect renames which causes many objects to be examined. In a
virtualized repo, those objects do not exist locally so the rename logic
triggers them to be fetched from the server. This results in the status call
taking hours to complete on very large repos vs seconds with this patch.
Add a new config status.renames setting to enable turning off rename
detection during status and commit. This setting will default to the value
of diff.renames.
Add a new config status.renamelimit setting to to enable bounding the time
spent finding out inexact renames during status and commit. This setting
will default to the value of diff.renamelimit.
Add --no-renames command line option to status that enables overriding the
config setting from the command line. Add --find-renames[=<n>] command line
option to status that enables detecting renames and optionally setting the
similarity index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Original-Patch-by: Alejandro Pauly <alpauly@microsoft.com>
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you do something like
- git add .
- git status
- git commit
- git show (or git diff HEAD)
one would expect to have analogous output from git status and git show
(or similar diff-related programs). This is generally not the case, as
git status has hard coded values for diff related options.
With this commit the hard coded settings are dropped from the status
command in favour for values provided by git_diff_ui_config.
What follows are some remarks on the concrete options which were hard
coded in git status:
diffopt.detect_rename
Since the very beginning of git status in a3e870f2e2 ("Add "commit"
helper script", 2005-05-30), git status always used rename detection,
whereas with commands like show and log one had to activate it with a
command line option. After 5404c116aa ("diff: activate diff.renames by
default", 2016-02-25) the default behaves the same by coincidence, but
changing diff.renames to other values can break the consistency between
git status and other commands again. With this commit one control the
same default behaviour with diff.renames.
diffopt.rename_limit
Similarly one has the option diff.renamelimit to adjust this limit for
all commands but git status. With this commit git status will also honor
those.
diffopt.break_opt
Unlike the other two options this cannot be configured by a
configuration option yet. This commit will also change the default
behaviour to not use break rewrites. But as rename detection is most
likely on, this is dangerous to be activated anyway as one can see
here:
https://public-inbox.org/git/xmqqegqaahnh.fsf@gitster.dls.corp.google.com/
Signed-off-by: Eckhard S. Maaß <eckhard.s.maass@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert two uses of EMPTY_TREE_SHA1_HEX to use empty_tree_oid_hex to
avoid a dependency on a given hash algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the various *_sha1 members to use struct object_id instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the declaration and definition of strbuf_add_unique_abbrev to
make it take a pointer to struct object_id. Predeclare the struct in
strbuf.h, as cache.h includes strbuf.h before it declares the struct,
and otherwise the struct declaration would have the wrong scope.
Apply the following semantic patch, along with the standard object_id
transforms, to adjust the callers:
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2.hash, E3);
+ strbuf_add_unique_abbrev(E1, &E2, E3);
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2->hash, E3);
+ strbuf_add_unique_abbrev(E1, E2, E3);
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff Hostetler
John Lin
Matthew DeVore
Johannes Schindelin
Jeff King
Nguyễn Thái Ngọc Duy
Denton Liu
Damien Robert
Phillip Wood
Stephen P. Smith
Stefan Beller
Ben Peart
Eckhard S. Maaß
brian m. carlson