| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If a branch name is longer than four characters then memcmp() reads over
the end of the static string "HEAD". This causes the following test
failures with AddressSanitizer:
t3203-branch-output.sh (Wstat: 256 Tests: 18 Failed: 4)
Failed tests: 12, 15-17
Non-zero exit status: 1
t3412-rebase-root.sh (Wstat: 256 Tests: 31 Failed: 3)
Failed tests: 28-29, 31
Non-zero exit status: 1
t3507-cherry-pick-conflict.sh (Wstat: 256 Tests: 31 Failed: 4)
Failed tests: 14, 29-31
Non-zero exit status: 1
t3510-cherry-pick-sequence.sh (Wstat: 256 Tests: 39 Failed: 14)
Failed tests: 17, 22-26, 28-30, 34-35, 37-39
Non-zero exit status: 1
t3420-rebase-autostash.sh (Wstat: 256 Tests: 28 Failed: 4)
Failed tests: 24-27
Non-zero exit status: 1
t3404-rebase-interactive.sh (Wstat: 256 Tests: 91 Failed: 57)
Failed tests: 17, 19, 21-42, 44, 46-74, 77, 81-82
Non-zero exit status: 1
t3900-i18n-commit.sh (Wstat: 256 Tests: 34 Failed: 1)
Failed test: 34
Non-zero exit status: 1
t5407-post-rewrite-hook.sh (Wstat: 256 Tests: 14 Failed: 6)
Failed tests: 9-14
Non-zero exit status: 1
t7001-mv.sh (Wstat: 256 Tests: 46 Failed: 5)
Failed tests: 39-43
Non-zero exit status: 1
t7509-commit.sh (Wstat: 256 Tests: 12 Failed: 2)
Failed tests: 11-12
Non-zero exit status: 1
t7512-status-help.sh (Wstat: 256 Tests: 39 Failed: 35)
Failed tests: 5-39
Non-zero exit status: 1
t6030-bisect-porcelain.sh (Wstat: 256 Tests: 70 Failed: 1)
Failed test: 13
Non-zero exit status: 1
And if a branch is named "H", "HE", or "HEA" then the current if clause
erroneously considers it as matching "HEAD" because it only compares
up to the end of the branch name.
Fix that by doing the comparison using strcmp() and only after the
branch name is extracted. This way neither too less nor too many
characters are checked. While at it call strchrnul() to find the end
of the branch name instead of open-coding it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
"git status --branch --short" accessed beyond the constant string
"HEAD", which has been corrected.
* rs/wt-status-detached-branch-fix:
wt-status: use skip_prefix() to get rid of magic string length constants
wt-status: don't skip a magical number of characters blindly
wt-status: avoid building bogus branch name with detached HEAD
wt-status: exit early using goto in wt_shortstatus_print_tracking()
t7060: add test for status --branch on a detached HEAD
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the variable branch_name, which already has "refs/heads/" removed,
instead of blindly advancing in the ->branch string by 11 bytes. This
is safer and less magical.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we're on a detached HEAD then wt_shortstatus_print_tracking() takes
the string "HEAD (no branch)", translates it, skips the first eleven
characters and passes the result to branch_get(), which returns a bogus
result and accesses memory out of bounds in order to produce it.
Somehow stat_tracking_info(), which is passed that result, does the
right thing anyway, i.e. it finds that there is no base.
Avoid the bogus results and memory accesses by checking for HEAD first
and exiting early in that case. This fixes t7060 with --valgrind.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Deduplicate printing the line terminator by jumping to the end of the
function.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
|
|
After using "git checkout --detach", the reflog is left with an entry
like
checkout: moving from ... to HEAD
This message is parsed to generate the 'HEAD detached at' message in
'git branch' and 'git status', which leads to the not-so-useful message
'HEAD detached at HEAD'.
Instead, when parsing such reflog entry, resolve HEAD to the
corresponding commit in the reflog, so that the message becomes 'HEAD
detached at $sha1'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sg/wt-status-header-inclusion:
wt-status: move #include "pathspec.h" to the header
|
|
* sg/wt-status-header-inclusion:
wt-status: move #include "pathspec.h" to the header
|
|
The declaration of 'struct wt_status' requires the declararion of 'struct
pathspec'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "git status" to show a more detailed information regarding
the "rebase -i" session in progress.
* gp/status-rebase-i-info:
status: add new tests for status during rebase -i
status: give more information during rebase -i
status: differentiate interactive from non-interactive rebases
status: factor two rebase-related messages together
|
|
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
|
|
git status gives more information during rebase -i, about the list of
command that are done during the rebase. It displays the two last
commands executed and the two next lines to be executed. It also gives
hints to find the whole files in .git directory.
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
|
|
The diff and submodule shortlog appended to the commit message template
by 'git commit --verbose' are not stripped when the commit message
contains an indented scissors line.
When cleaning up a commit message with 'git commit --verbose' or
'--cleanup=scissors' the code is careful and triggers only on a pure
scissors line, i.e. a line containing nothing but a comment character, a
space, and the scissors cut. This is good, because people can embed
scissors lines in the commit message while using 'git commit --verbose',
and the text they write after their indented scissors line doesn't get
deleted.
While doing so, however, the cleanup function only looks at the first
line matching the scissors pattern and if it doesn't start at the
beginning of the line, then the function just returns without performing
any cleanup. This is wrong, because a "real" scissors line added by
'git commit --verbose' might follow, and in that case the diff and
submodule shortlog get included in the commit message.
Fix this by changing the scissors pattern to match only at the beginning
of the line, yet be careful to catch scissors on the first line as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
|
|
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
|
|
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/plug-wt-shortstatus-tracking-leak:
wt-status.c: fix a memleak
|
|
wt_shortstatus_print_tracking() calls shorten_unambiguous_ref(),
which returns a newly allocated memory the caller takes ownership
of; it is necessary to free `base` when the function is done with
it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The run-command interface was easy to abuse and make a pipe for us
to read from the process, wait for the process to finish and then
attempt to read its output, which is a pattern that lead to a
deadlock. Fix such uses by introducing a helper to do this
correctly (i.e. we need to read first and then wait the process to
finish) and also add code to prevent such abuse in the run-command
helper.
* jk/run-command-capture:
run-command: forbid using run_command with piped output
trailer: use capture_command
submodule: use capture_command
wt-status: use capture_command
run-command: introduce capture_command helper
wt_status: fix signedness mismatch in strbuf_read call
wt-status: don't flush before running "submodule status"
|
|
When we spawn "git submodule status" to read its output, we
use run_command() followed by strbuf_read() read from the
pipe. This can deadlock if the subprocess output is larger
than the system pipe buffer.
Furthermore, if start_command() fails, we'll try to read
from a bogus descriptor (probably "-1" or a descriptor we
just closed, but it is a bad idea for us to make assumptions
about how start_command implements its error handling). And
if start_command succeeds, we leak the file descriptor for
the pipe to the child.
All of these can be solved by using the capture_command
helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We call strbuf_read(), and want to know whether we got any
output. To do so, we assign the result to a size_t, and
check whether it is non-zero.
But strbuf_read returns a signed ssize_t. If it encounters
an error, it will return -1, and we'll end up treating this
the same as if we had gotten output. Instead, we can just
check whether our buffer has anything in it (which is what
we care about anyway, and is the same thing since we know
the buffer was empty to begin with).
Note that the "len" variable actually has two roles in this
function. Now that we've eliminated the first, we can push the
declaration closer to the point of use for the second one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a holdover from the original implementation in
ac8d5af (builtin-status: submodule summary support,
2008-04-12), which just had the sub-process output to our
descriptor; we had to make sure we had flushed any data that
we produced before it started writing.
Since 3ba7407 (submodule summary: ignore --for-status
option, 2013-09-06), however, we pipe the sub-process output
back to ourselves. So there's no longer any need to flush
(it does not hurt, but it may leave readers wondering why we
do it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch" on a detached HEAD always said "(detached from xyz)",
even when "git status" would report "detached at xyz". The HEAD is
actually at xyz and haven't been moved since it was detached in
such a case, but the user cannot read what the current value of
HEAD is when "detached from" is used.
* mg/detached-head-report:
branch: name detached HEAD analogous to status
wt-status: refactor detached HEAD analysis
|
|
"git status" now allows the "-v" to be given twice to show the
differences that are left in the working tree not to be committed.
* mg/status-v-v:
commit/status: show the index-worktree diff with -v -v
t7508: test git status -v
t7508: .gitignore 'expect' and 'output' files
|
|
update_index_if_able() is moved down so that the updated untracked
cache could be written out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
wt_status_print() is the only caller of wt_status_get_detached_from().
The latter performs most of the analysis of a detached HEAD, including
finding state->detached_from; the caller checks whether the detached
HEAD is still at state->detached_from or has moved away.
Move that last bit of analysis to wt_status_get_detached_from(), too,
and store the boolean result in state->detached_at.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git commit and git status in long format show the diff between HEAD
and the index when given -v. This allows previewing a commit to be made.
They also list tracked files with unstaged changes, but without a diff.
Introduce '-v -v' which shows the diff between the index and the
worktree in addition to the HEAD index diff. This allows a review of unstaged
changes which might be missing from the commit.
In the case of '-v -v', additonal header lines
Changes to be committed:
and
Changes not staged for commit:
are inserted before the diffs, which are equal to those in the status
part; the latter preceded by 50*"-" to make it stick out more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code to read branch name from various files in .git/ directory
would have misbehaved if the code to write them left an empty file.
* jk/status-read-branch-name-fix:
read_and_strip_branch: fix typo'd address-of operator
|
|
Code to read branch name from various files in .git/ directory
would have misbehaved if the code to write them left an empty file.
* jk/status-read-branch-name-fix:
read_and_strip_branch: fix typo'd address-of operator
|
|
When we are chomping newlines from the end of a strbuf, we
must check "sb.len != 0" before accessing "sb.buf[sb.len - 1]".
However, this code mistakenly checks "&sb.len", which is
always true (it is a part of an auto struct, so the address
is always non-zero). This could lead to us accessing memory
outside the strbuf when we read an empty file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert users of struct child_process to using the managed argv_array
args instead of providing their own. This shortens the code a bit and
ensures that the allocated memory is released automatically after use.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add managed "env" array to child_process to clarify the lifetime
rules.
* rs/run-command-env-array:
use env_array member of struct child_process
run-command: add env_array, an optional argv_array for env
|
|
Convert users of struct child_process to using the managed env_array for
specifying environment variables instead of supplying an array on the
stack or bringing their own argv_array. This shortens and simplifies
the code and ensures automatically that the allocated memory is freed
after use.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref
resolves successfully for writing but not for reading). Change this to be
a flags field instead, and pass the new constant RESOLVE_REF_READING when
we want this behaviour.
While at it, swap two of the arguments in the function to put output
arguments at the end. As a nice side effect, this ensures that we can
catch callers that were unaware of the new API so they can be audited.
Give the wrapper functions resolve_refdup and read_ref_full the same
treatment for consistency.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
|
|
Calculating duration from a single uint64_t is simpler than from a struct
timeval. Change performance measurement for 'advice.statusuoption' from
gettimeofday() to getnanotime().
Also initialize t_begin to prevent uninitialized variable warning.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/status-code-clean-up:
wt-status: simplify building of summary limit argument
wt-status: use argv_array for environment
|
|
Use argv_array_pushf for building the number string for the option
--summary-limit directly instead of using an intermediate buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using a PATH_MAX buffer, use argv_array for constructing the
environment for git submodule summary. This simplifies the code a bit
and removes the arbitrary length limit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" (and "git commit") behaved as if changes in a modified
submodule are not there if submodule.*.ignore configuration is set,
which was misleading. The configuration is only to unclutter diff
output during the course of development, and should not to hide
changes in the "status" output to cause the users forget to commit
them.
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
|
|
submodule.*.ignore and diff.ignoresubmodules are used to ignore all
submodule changes in "diff" output, but it can be confusing to
apply these configuration values to status and commit.
This is a backward-incompatible change, but should be so in a good
way (aka bugfix).
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
|
|
* fc/status-printf-squelch-format-zero-length-warnings:
silence a bunch of format-zero-length warnings
|
|
This can be observed in many versions of gcc and still exists with 4.9.0:
wt-status.c: In function ‘wt_status_print_unmerged_header’:
wt-status.c:191:2: warning: zero-length gnu_printf format string [-Wformat-zero-length]
status_printf_ln(s, c, "");
^
The user have long been told to pass -Wno-format-zero-length, but a
patch that avoids warning altogether is not too noisy, so let's do
so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
René Scharfe
Junio C Hamano
Matthieu Moy
SZEDER Gábor
Jeff King
Guillaume Pagès
Stefan Beller
Nguyễn Thái Ngọc Duy
Michael J Gruber
Ronnie Sahlberg
Karsten Blees
Felipe Contreras