| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
|
|
"git commit --dry-run" reported "No, no, you cannot commit." in one
case where "git commit" would have allowed you to commit, and this
improves it a little bit ("git commit --dry-run --short" still does
not give you the correct answer, for example). This is a stop-gap
measure in that "commit --short --dry-run" still gives an incorrect
result.
* ss/commit-dry-run-resolve-merge-to-no-op:
wt-status.c: set commitable bit if there is a meaningful merge.
|
|
And make it work with any given worktree, in preparation for (again)
find_shared_symref(). read_and_strip_branch() is deleted because it's
no longer used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a preparation step for find_shared_symref() to detect if any
worktree is being rebased.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
worktree.c:find_shared_symref() later needs to know if a branch is being
rebased, and only rebase, no cherry-pick, do detached branch... Split
this code so it can be used independently from other in-progress tests.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Assorted minor clean-ups.
* sb/misc-cleanups:
credential-cache, send_request: close fd when done
bundle: don't leak an fd in case of early return
abbrev_sha1_in_line: don't leak memory
notes: don't leak memory in git_config_get_notes_strategy
|
|
`split` is of type `struct strbuf **`, and currently we are leaking split
itself as well as each element in split[i]. We have a dedicated free
function for `struct strbuf **`, which takes care of freeing all
related memory.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/wt-status-mismarked-i18n:
wt-status: allow "ahead " to be picked up by l10n
|
|
The extra pair of parentheses keeps the l10n engine from picking up the
string. Remove them so that "ahead " ends up in git.pot.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'commit --dry-run' and 'commit' return values differed if a
conflicted merge had been resolved and the resulting commit would
record the same tree as the parent.
Update show_merge_in_progress to set the commitable bit if conflicts
have been resolved and a merge is in progress.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More transition from "unsigned char[40]" to "struct object_id".
This needed a few merge fixups, but is mostly disentangled from other
topics.
* bc/object-id:
remote: convert functions to struct object_id
Remove get_object_hash.
Convert struct object to object_id
Add several uses of get_object_hash.
object: introduce get_object_hash macro.
ref_newer: convert to use struct object_id
push_refs_with_export: convert to struct object_id
get_remote_heads: convert to struct object_id
parse_fetch: convert to use struct object_id
add_sought_entry_mem: convert to struct object_id
Convert struct ref to use object_id.
sha1_file: introduce has_object_file helper.
|
|
If a branch name is longer than four characters then memcmp() reads over
the end of the static string "HEAD". This causes the following test
failures with AddressSanitizer:
t3203-branch-output.sh (Wstat: 256 Tests: 18 Failed: 4)
Failed tests: 12, 15-17
Non-zero exit status: 1
t3412-rebase-root.sh (Wstat: 256 Tests: 31 Failed: 3)
Failed tests: 28-29, 31
Non-zero exit status: 1
t3507-cherry-pick-conflict.sh (Wstat: 256 Tests: 31 Failed: 4)
Failed tests: 14, 29-31
Non-zero exit status: 1
t3510-cherry-pick-sequence.sh (Wstat: 256 Tests: 39 Failed: 14)
Failed tests: 17, 22-26, 28-30, 34-35, 37-39
Non-zero exit status: 1
t3420-rebase-autostash.sh (Wstat: 256 Tests: 28 Failed: 4)
Failed tests: 24-27
Non-zero exit status: 1
t3404-rebase-interactive.sh (Wstat: 256 Tests: 91 Failed: 57)
Failed tests: 17, 19, 21-42, 44, 46-74, 77, 81-82
Non-zero exit status: 1
t3900-i18n-commit.sh (Wstat: 256 Tests: 34 Failed: 1)
Failed test: 34
Non-zero exit status: 1
t5407-post-rewrite-hook.sh (Wstat: 256 Tests: 14 Failed: 6)
Failed tests: 9-14
Non-zero exit status: 1
t7001-mv.sh (Wstat: 256 Tests: 46 Failed: 5)
Failed tests: 39-43
Non-zero exit status: 1
t7509-commit.sh (Wstat: 256 Tests: 12 Failed: 2)
Failed tests: 11-12
Non-zero exit status: 1
t7512-status-help.sh (Wstat: 256 Tests: 39 Failed: 35)
Failed tests: 5-39
Non-zero exit status: 1
t6030-bisect-porcelain.sh (Wstat: 256 Tests: 70 Failed: 1)
Failed test: 13
Non-zero exit status: 1
And if a branch is named "H", "HE", or "HEA" then the current if clause
erroneously considers it as matching "HEAD" because it only compares
up to the end of the branch name.
Fix that by doing the comparison using strcmp() and only after the
branch name is extracted. This way neither too less nor too many
characters are checked. While at it call strchrnul() to find the end
of the branch name instead of open-coding it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
"git status --branch --short" accessed beyond the constant string
"HEAD", which has been corrected.
* rs/wt-status-detached-branch-fix:
wt-status: use skip_prefix() to get rid of magic string length constants
wt-status: don't skip a magical number of characters blindly
wt-status: avoid building bogus branch name with detached HEAD
wt-status: exit early using goto in wt_shortstatus_print_tracking()
t7060: add test for status --branch on a detached HEAD
|
|
"git status --branch --short" accessed beyond the constant string
"HEAD", which has been corrected.
* rs/wt-status-detached-branch-fix:
wt-status: use skip_prefix() to get rid of magic string length constants
wt-status: don't skip a magical number of characters blindly
wt-status: avoid building bogus branch name with detached HEAD
wt-status: exit early using goto in wt_shortstatus_print_tracking()
t7060: add test for status --branch on a detached HEAD
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the variable branch_name, which already has "refs/heads/" removed,
instead of blindly advancing in the ->branch string by 11 bytes. This
is safer and less magical.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we're on a detached HEAD then wt_shortstatus_print_tracking() takes
the string "HEAD (no branch)", translates it, skips the first eleven
characters and passes the result to branch_get(), which returns a bogus
result and accesses memory out of bounds in order to produce it.
Somehow stat_tracking_info(), which is passed that result, does the
right thing anyway, i.e. it finds that there is no base.
Avoid the bogus results and memory accesses by checking for HEAD first
and exiting early in that case. This fixes t7060 with --valgrind.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Deduplicate printing the line terminator by jumping to the end of the
function.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
|
|
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
|
|
After using "git checkout --detach", the reflog is left with an entry
like
checkout: moving from ... to HEAD
This message is parsed to generate the 'HEAD detached at' message in
'git branch' and 'git status', which leads to the not-so-useful message
'HEAD detached at HEAD'.
Instead, when parsing such reflog entry, resolve HEAD to the
corresponding commit in the reflog, so that the message becomes 'HEAD
detached at $sha1'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sg/wt-status-header-inclusion:
wt-status: move #include "pathspec.h" to the header
|
|
* sg/wt-status-header-inclusion:
wt-status: move #include "pathspec.h" to the header
|
|
The declaration of 'struct wt_status' requires the declararion of 'struct
pathspec'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "git status" to show a more detailed information regarding
the "rebase -i" session in progress.
* gp/status-rebase-i-info:
status: add new tests for status during rebase -i
status: give more information during rebase -i
status: differentiate interactive from non-interactive rebases
status: factor two rebase-related messages together
|
|
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
|
|
git status gives more information during rebase -i, about the list of
command that are done during the rebase. It displays the two last
commands executed and the two next lines to be executed. It also gives
hints to find the whole files in .git directory.
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
|
|
The diff and submodule shortlog appended to the commit message template
by 'git commit --verbose' are not stripped when the commit message
contains an indented scissors line.
When cleaning up a commit message with 'git commit --verbose' or
'--cleanup=scissors' the code is careful and triggers only on a pure
scissors line, i.e. a line containing nothing but a comment character, a
space, and the scissors cut. This is good, because people can embed
scissors lines in the commit message while using 'git commit --verbose',
and the text they write after their indented scissors line doesn't get
deleted.
While doing so, however, the cleanup function only looks at the first
line matching the scissors pattern and if it doesn't start at the
beginning of the line, then the function just returns without performing
any cleanup. This is wrong, because a "real" scissors line added by
'git commit --verbose' might follow, and in that case the diff and
submodule shortlog get included in the commit message.
Fix this by changing the scissors pattern to match only at the beginning
of the line, yet be careful to catch scissors on the first line as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
|
|
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
|
|
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/plug-wt-shortstatus-tracking-leak:
wt-status.c: fix a memleak
|
|
wt_shortstatus_print_tracking() calls shorten_unambiguous_ref(),
which returns a newly allocated memory the caller takes ownership
of; it is necessary to free `base` when the function is done with
it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The run-command interface was easy to abuse and make a pipe for us
to read from the process, wait for the process to finish and then
attempt to read its output, which is a pattern that lead to a
deadlock. Fix such uses by introducing a helper to do this
correctly (i.e. we need to read first and then wait the process to
finish) and also add code to prevent such abuse in the run-command
helper.
* jk/run-command-capture:
run-command: forbid using run_command with piped output
trailer: use capture_command
submodule: use capture_command
wt-status: use capture_command
run-command: introduce capture_command helper
wt_status: fix signedness mismatch in strbuf_read call
wt-status: don't flush before running "submodule status"
|
|
When we spawn "git submodule status" to read its output, we
use run_command() followed by strbuf_read() read from the
pipe. This can deadlock if the subprocess output is larger
than the system pipe buffer.
Furthermore, if start_command() fails, we'll try to read
from a bogus descriptor (probably "-1" or a descriptor we
just closed, but it is a bad idea for us to make assumptions
about how start_command implements its error handling). And
if start_command succeeds, we leak the file descriptor for
the pipe to the child.
All of these can be solved by using the capture_command
helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We call strbuf_read(), and want to know whether we got any
output. To do so, we assign the result to a size_t, and
check whether it is non-zero.
But strbuf_read returns a signed ssize_t. If it encounters
an error, it will return -1, and we'll end up treating this
the same as if we had gotten output. Instead, we can just
check whether our buffer has anything in it (which is what
we care about anyway, and is the same thing since we know
the buffer was empty to begin with).
Note that the "len" variable actually has two roles in this
function. Now that we've eliminated the first, we can push the
declaration closer to the point of use for the second one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a holdover from the original implementation in
ac8d5af (builtin-status: submodule summary support,
2008-04-12), which just had the sub-process output to our
descriptor; we had to make sure we had flushed any data that
we produced before it started writing.
Since 3ba7407 (submodule summary: ignore --for-status
option, 2013-09-06), however, we pipe the sub-process output
back to ourselves. So there's no longer any need to flush
(it does not hurt, but it may leave readers wondering why we
do it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch" on a detached HEAD always said "(detached from xyz)",
even when "git status" would report "detached at xyz". The HEAD is
actually at xyz and haven't been moved since it was detached in
such a case, but the user cannot read what the current value of
HEAD is when "detached from" is used.
* mg/detached-head-report:
branch: name detached HEAD analogous to status
wt-status: refactor detached HEAD analysis
|
|
"git status" now allows the "-v" to be given twice to show the
differences that are left in the working tree not to be committed.
* mg/status-v-v:
commit/status: show the index-worktree diff with -v -v
t7508: test git status -v
t7508: .gitignore 'expect' and 'output' files
|
|
update_index_if_able() is moved down so that the updated untracked
cache could be written out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
wt_status_print() is the only caller of wt_status_get_detached_from().
The latter performs most of the analysis of a detached HEAD, including
finding state->detached_from; the caller checks whether the detached
HEAD is still at state->detached_from or has moved away.
Move that last bit of analysis to wt_status_get_detached_from(), too,
and store the boolean result in state->detached_at.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git commit and git status in long format show the diff between HEAD
and the index when given -v. This allows previewing a commit to be made.
They also list tracked files with unstaged changes, but without a diff.
Introduce '-v -v' which shows the diff between the index and the
worktree in addition to the HEAD index diff. This allows a review of unstaged
changes which might be missing from the commit.
In the case of '-v -v', additonal header lines
Changes to be committed:
and
Changes not staged for commit:
are inserted before the diffs, which are equal to those in the status
part; the latter preceded by 50*"-" to make it stick out more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code to read branch name from various files in .git/ directory
would have misbehaved if the code to write them left an empty file.
* jk/status-read-branch-name-fix:
read_and_strip_branch: fix typo'd address-of operator
|
Junio C Hamano
Nguyễn Thái Ngọc Duy
Stefan Beller
Michael J Gruber
Stephen P. Smith
René Scharfe
brian m. carlson
Matthieu Moy
SZEDER Gábor
Jeff King
Guillaume Pagès