summaryrefslogtreecommitdiff
path: root/wt-status.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-28Merge branch 'jk/color-and-pager'Libravatar Junio C Hamano1-2/+4
* jk/color-and-pager: want_color: automatically fallback to color.ui diff: don't load color config in plumbing config: refactor get_colorbool function color: delay auto-color decision until point of use git_config_colorbool: refactor stdout_is_tty handling diff: refactor COLOR_DIFF from a flag into an int setup_pager: set GIT_PAGER_IN_USE t7006: use test_config helpers test-lib: add helper functions for config t7006: modernize calls to unset Conflicts: builtin/commit.c parse-options.c
2011-08-19color: delay auto-color decision until point of useLibravatar Jeff King1-1/+3
When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18diff: refactor COLOR_DIFF from a flag into an intLibravatar Jeff King1-1/+1
This lets us store more than just a bit flag for whether we want color; we can also store whether we want automatic colors. This can be useful for making the automatic-color decision closer to the point of use. This mostly just involves replacing DIFF_OPT_* calls with manipulations of the flag. The biggest exception is that calls to DIFF_OPT_TST must check for "o->use_color > 0", which lets an "unknown" value (i.e., the default) stay at "no color". In the previous code, a value of "-1" was not propagated at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-29Merge branch 'jk/maint-1.7.2-status-ignored'Libravatar Junio C Hamano1-1/+1
* jk/maint-1.7.2-status-ignored: git status --ignored: tests and docs status: fix bug with missing --ignore files Conflicts: Documentation/git-status.txt t/t7508-status.sh
2011-06-02status: fix bug with missing --ignore filesLibravatar Jeff King1-1/+1
Commit 1b908b6 (wt-status: rename and restructure status-print-untracked, 2010-04-10) converted the wt_status_print_untracked function into wt_status_print_other, taking a string_list of either untracked or ignored items to print. However, the "nothing to show" early return still checked the wt_status->untracked list instead of the passed-in list. That meant that if we had ignored items to show, but no untracked items, we would erroneously exit early and fail to show the ignored items. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-01Merge branch 'ab/i18n-st'Libravatar Junio C Hamano1-58/+58
* ab/i18n-st: (69 commits) i18n: git-shortlog basic messages i18n: git-revert split up "could not revert/apply" message i18n: git-revert literal "me" messages i18n: git-revert "Your local changes" message i18n: git-revert basic messages i18n: git-notes GIT_NOTES_REWRITE_MODE error message i18n: git-notes basic commands i18n: git-gc "Auto packing the repository" message i18n: git-gc basic messages i18n: git-describe basic messages i18n: git-clean clean.requireForce messages i18n: git-clean basic messages i18n: git-bundle basic messages i18n: git-archive basic messages i18n: git-status "renamed: " message i18n: git-status "Initial commit" message i18n: git-status "Changes to be committed" message i18n: git-status shortstatus messages i18n: git-status "nothing to commit" messages i18n: git-status basic messages ... Conflicts: builtin/branch.c builtin/checkout.c builtin/clone.c builtin/commit.c builtin/grep.c builtin/merge.c builtin/push.c builtin/revert.c t/t3507-cherry-pick-conflict.sh t/t7607-merge-overwrite.sh
2011-03-19Merge branch 'jn/status-translatable'Libravatar Junio C Hamano1-43/+117
* jn/status-translatable: commit, status: use status_printf{,_ln,_more} helpers commit: refer to commit template as s->fp wt-status: add helpers for printing wt-status lines Conflicts: builtin/commit.c
2011-03-09i18n: git-status "renamed: " messageLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Gettextize the "renamed: %s -> %s" message which appears as part of git-status(1) output. Two tests in t4001-diff-rename.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status "Initial commit" messageLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Gettextize the "# Initial commit" message. A test in t7501-commit.sh explicitly checked for this message. Change it to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status "Changes to be committed" messageLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Gettextize the "# Changes to be committed:" messages. Several tests explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Since these tests didn't check for the rest of the git-status(1) output this change has been split up from the "git-status basic messages" patch. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status shortstatus messagesLibravatar Ævar Arnfjörð Bjarmason1-6/+6
Make the messages added in v1.7.2-rc0~54^2~1 translatable. Some of these could use the to be implemented plural support in the gettext library. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status "nothing to commit" messagesLibravatar Ævar Arnfjörð Bjarmason1-6/+6
Gettextize the "nothing to commit" messages. Many tests explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-status basic messagesLibravatar Ævar Arnfjörð Bjarmason1-43/+43
Gettextize the most common git-status messages. Many tests checked for these explicitly. Change them to skip under GETTEXT_POISON=YesPlease. Some of the tests in t7508-status.sh needed to be split up when I added C_LOCALE_OUTPUT to them, since parts of them affected later tests (some of which aren't being skipped) indirectly. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09Merge branch 'js/cherry-pick-usability'Libravatar Junio C Hamano1-2/+2
* js/cherry-pick-usability: Teach commit about CHERRY_PICK_HEAD bash: teach __git_ps1 about CHERRY_PICK_HEAD Introduce CHERRY_PICK_HEAD t3507: introduce pristine-detach helper
2011-03-08commit, status: use status_printf{,_ln,_more} helpersLibravatar Jonathan Nieder1-43/+43
wt-status code is used to provide a reminder of changes included and not included for the commit message template opened in the operator's text editor by "git commit". Therefore each line of its output begins with the comment character "#": # Please enter the commit message for your changes. Lines starting Use the new status_printf{,_ln,_more} functions to take care of adding "#" to the beginning of such status lines automatically. Using these will have two advantages over the current code: - The obvious one is to force separation of the "#" from the translatable part of the message when git learns to translate its output. - Another advantage is that this makes it easier for us to drop "#" prefix in "git status" output in later versions of git if we want to. Explained-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08wt-status: add helpers for printing wt-status linesLibravatar Jonathan Nieder1-0/+74
Introduce status_printf{,_ln,_more} wrapper functions around color_vfprintf() which take care of adding "#" to the beginning of status lines automatically. The semantics: - status_printf() is just like color_fprintf() but it adds a "# " at the beginning of each line of output; - status_printf_ln() is a convenience function that additionally adds "\n" at the end; - status_printf_more() is a variant of status_printf() used to continue lines that have already started. It suppresses the "#" at the beginning of the first line. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08commit, status: use status_printf{,_ln,_more} helpersLibravatar Jonathan Nieder1-43/+43
wt-status code is used to provide a reminder of changes included and not included for the commit message template opened in the operator's text editor by "git commit". Therefore each line of its output begins with the comment character "#": # Please enter the commit message for your changes. Lines starting Use the new status_printf{,_ln,_more} functions to take care of adding "#" to the beginning of such status lines automatically. Using these will have two advantages over the current code: - The obvious one is to force separation of the "#" from the translatable part of the message when git learns to translate its output. - Another advantage is that this makes it easier for us to drop "#" prefix in "git status" output in later versions of git if we want to. Explained-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08wt-status: add helpers for printing wt-status linesLibravatar Jonathan Nieder1-0/+74
Introduce status_printf{,_ln,_more} wrapper functions around color_vfprintf() which take care of adding "#" to the beginning of status lines automatically. The semantics: - status_printf() is just like color_fprintf() but it adds a "# " at the beginning of each line of output; - status_printf_ln() is a convenience function that additionally adds "\n" at the end; - status_printf_more() is a variant of status_printf() used to continue lines that have already started. It suppresses the "#" at the beginning of the first line. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21Teach commit about CHERRY_PICK_HEADLibravatar Jay Soffian1-2/+2
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after a conflicting cherry-pick. While this would preserve the original commit's authorship, it would sadly discard cherry-pick's carefully crafted MERGE_MSG (which contains the list of conflicts as well as the original commit-id in the case of cherry-pick -x). On the other hand, if a bare 'commit' were performed, it would preserve the MERGE_MSG while resetting the authorship. In other words, there was no way to simultaneously take the authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG. This change fixes that situation. A bare 'commit' will now take the authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG. If the user wishes to reset authorship, that must now be done explicitly via --reset-author. A side-benefit of passing commit authorship along this way is that we can eliminate redundant authorship parsing code from revert.c. (Also removed an unused include from revert.c) Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-03Convert ce_path_match() to use struct pathspecLibravatar Nguyễn Thái Ngọc Duy1-1/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-03struct rev_info: convert prune_data to struct pathspecLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-16Merge branch 'aa/status-hilite-branch'Libravatar Junio C Hamano1-4/+10
* aa/status-hilite-branch: default color.status.branch to "same as header" status: show branchname with a configurable color
2010-12-10default color.status.branch to "same as header"Libravatar Jeff King1-2/+5
This gives it the same behavior as we had prior to 1d28232 (status: show branchname with a configurable color). To do this we need the concept of a "NIL" color, which is provided by color.[ch]. The implementation is very simple; in particular, there are no precautions taken against code accidentally printing the NIL. This should be fine in practice because: 1. You can't input a NIL color in the config, so it must come from the in-code defaults. Which means it is up the client code to handle the NILs it defines. 2. If we do ever print a NIL, it will be obvious what the problem is, and the bug can be fixed. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-03Merge branch 'kb/maint-status-cquote'Libravatar Junio C Hamano1-0/+10
* kb/maint-status-cquote: status: Quote paths with spaces in short format
2010-11-29status: show branchname with a configurable colorLibravatar Aleksi Aalto1-3/+6
You can tell "git status" to paint the name of the current branch in its output (the line that says "On branch ...") by setting the configuration variable color.status.branch; it is by default turned off. Signed-off-by: Aleksi Aalto <aga@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09status: Quote paths with spaces in short formatLibravatar Kevin Ballard1-0/+10
According to the documentation for git-status, in short-format mode, paths with spaces or unprintable characters are quoted. However 28fba29 (Do not quote SP., 2005-10-17) removed the behavior that quotes paths that have spaces but not unprintable characters. Unfortunately this makes the output of `git status --porcelain` non-parseable in certain (rather unusual) edge cases. In the interest of removing ambiguity when parsing the output of `git status --porcelain`, restore the behavior of quoting paths with spaces in git-status's short-format mode. Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03Better "Changed but not updated" message in git-statusLibravatar Matthieu Moy1-1/+1
Older Gits talked about "updating" a file to add its content to the index, but this terminology is confusing for new users. "to stage" is far more intuitive and already used in e.g. the "git stage" command name. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-27wt-status.c: don't leak directory entries when processing untracked,ignoredLibravatar Brandon Casey1-10/+6
When iterating through the list of directory entries, searching for untracked entries, only the entries added to the string_list were free'd. The rest (tracked or not matching the pathspec) were leaked. Ditto for the "ignored" loop. Rearrange the loops so that all entries are free'd. Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09Submodules: Add the new "ignore" config option for diff and statusLibravatar Jens Lehmann1-2/+6
The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-30Merge branch 'jl/status-ignore-submodules'Libravatar Junio C Hamano1-1/+9
* jl/status-ignore-submodules: Add the option "--ignore-submodules" to "git status" git submodule: ignore dirty submodules for summary and status Conflicts: builtin/commit.c t/t7508-status.sh wt-status.c wt-status.h
2010-06-30Merge branch 'jp/string-list-api-cleanup'Libravatar Junio C Hamano1-5/+5
* jp/string-list-api-cleanup: string_list: Fix argument order for string_list_append string_list: Fix argument order for string_list_lookup string_list: Fix argument order for string_list_insert_at_index string_list: Fix argument order for string_list_insert string_list: Fix argument order for for_each_string_list string_list: Fix argument order for print_string_list
2010-06-27string_list: Fix argument order for string_list_insertLibravatar Julian Phillips1-5/+5
Update the definition and callers of string_list_insert to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25Add the option "--ignore-submodules" to "git status"Libravatar Jens Lehmann1-1/+9
In some use cases it is not desirable that "git status" considers submodules that only contain untracked content as dirty. This may happen e.g. when the submodule is not under the developers control and not all build generated files have been added to .gitignore by the upstream developers. Using the "untracked" parameter for the "--ignore-submodules" option disables checking for untracked content and lets git diff report them as changed only when they have new commits or modified content. Sometimes it is not wanted to have submodules show up as changed when they just contain changes to their work tree (this was the behavior before 1.7.0). An example for that are scripts which just want to check for submodule commits while ignoring any changes to the work tree. Also users having large submodules known not to change might want to use this option, as the - sometimes substantial - time it takes to scan the submodule work tree(s) is saved when using the "dirty" parameter. And if you want to ignore any changes to submodules, you can now do that by using this option without parameters or with "all" (when the config option status.submodulesummary is set, using "all" will also suppress the output of the submodule summary). A new function handle_ignore_submodules_arg() is introduced to parse this option new to "git status" in a single location, as "git diff" already knew it. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'gv/portable'Libravatar Junio C Hamano1-11/+12
* gv/portable: test-lib: use DIFF definition from GIT-BUILD-OPTIONS build: propagate $DIFF to scripts Makefile: Tru64 portability fix Makefile: HP-UX 10.20 portability fixes Makefile: HPUX11 portability fixes Makefile: SunOS 5.6 portability fix inline declaration does not work on AIX Allow disabling "inline" Some platforms lack socklen_t type Make NO_{INET_NTOP,INET_PTON} configured independently Makefile: some platforms do not have hstrerror anywhere git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition test_cmp: do not use "diff -u" on platforms that lack one fixup: do not unconditionally disable "diff -u" tests: use "test_cmp", not "diff", when verifying the result Do not use "diff" found on PATH while building and installing enums: omit trailing comma for portability Makefile: -lpthread may still be necessary when libc has only pthread stubs Rewrite dynamic structure initializations to runtime assignment Makefile: pass CPPFLAGS through to fllow customization Conflicts: Makefile wt-status.h
2010-06-03Show branch information in short output of git statusLibravatar Daniel Knittl-Frank1-2/+65
This patch adds a first line in the output of `git status -s` when given the option `-b` or `--branch`, showing which branch the user is currently on, and in case of tracking branches the number of commits on each branch. Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-31Rewrite dynamic structure initializations to runtime assignmentLibravatar Gary V. Vaughan1-11/+12
Unfortunately, there are still plenty of production systems with vendor compilers that choke unless all compound declarations can be determined statically at compile time, for example hpux10.20 (I can provide a comprehensive list of our supported platforms that exhibit this problem if necessary). This patch simply breaks apart any compound declarations with dynamic initialisation expressions, and moves the initialisation until after the last declaration in the same block, in all the places necessary to have the offending compilers accept the code. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-21Merge branch 'mg/advice-statushints'Libravatar Junio C Hamano1-6/+15
* mg/advice-statushints: wt-status: take advice.statusHints seriously t7508: test advice.statusHints Conflicts: wt-status.c
2010-05-06wt-status: take advice.statusHints seriouslyLibravatar Michael J Gruber1-6/+15
Currently, status gives a lot of hints even when advice.statusHints is false. Change this so that all hints depend on the config variable. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-01wt-status: fix 'fprintf' compilation warningLibravatar Junio C Hamano1-1/+1
color_fprintf() has the same function signature as fprintf() and newer gcc warns when a non-constant string is fed as the format Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10status: --ignored option shows ignored filesLibravatar Junio C Hamano1-7/+15
There is no stronger reason behind the choice of "!!" than just I happened to have typed them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10wt-status: rename and restructure status-print-untrackedLibravatar Junio C Hamano1-8/+14
I will be reusing this to show ignored stuff in the next patch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10wt-status: collect ignored filesLibravatar Junio C Hamano1-0/+16
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10wt-status: plug memory leak while collecting untracked filesLibravatar Junio C Hamano1-0/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10wt-status: remove unused workdir_untracked memberLibravatar Junio C Hamano1-1/+0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-24Merge branch 'jl/submodule-diff-dirtiness'Libravatar Junio C Hamano1-7/+38
* jl/submodule-diff-dirtiness: git status: ignoring untracked files must apply to submodules too git status: Fix false positive "new commits" output for dirty submodules Refactor dirty submodule detection in diff-lib.c git status: Show detailed dirty status of submodules in long format git diff --submodule: Show detailed dirty status of submodules
2010-03-13git status: ignoring untracked files must apply to submodules tooLibravatar Jens Lehmann1-0/+2
Since 1.7.0 submodules are considered dirty when they contain untracked files. But when git status is called with the "-uno" option, the user asked to ignore untracked files, so they must be ignored in submodules too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES is introduced. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-09revision: introduce setup_revision_optLibravatar Junio C Hamano1-4/+11
So far the last parameter to setup_revisions() was to specify the default ref when the command line did not give any (typically "HEAD"). This changes it to take a pointer to a structure so that we can add other information without touching too many codepaths in later patches. There is no functionality change. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-08git status: Show detailed dirty status of submodules in long formatLibravatar Jens Lehmann1-7/+36
Since 1.7.0 there are three reasons a submodule is considered modified against the work tree: It contains new commits, modified content or untracked content. Lets show all reasons in the long format of git status, so the user can better asses the nature of the modification. This change does not affect the short and porcelain formats. Two new members are added to "struct wt_status_change_data" to store the information gathered by run_diff_files(). wt-status.c uses the new flag DIFF_OPT_DIRTY_SUBMODULES to tell diff-lib.c it wants to get detailed dirty information about submodules. A hint line for submodules is printed in the dirty header when dirty submodules are present. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-22Merge branch 'jl/submodule-diff'Libravatar Junio C Hamano1-5/+7
* jl/submodule-diff: Performance optimization for detection of modified submodules git status: Show uncommitted submodule changes too when enabled Teach diff that modified submodule directory is dirty Show submodules as modified when they contain a dirty work tree
2010-01-17git status: Show uncommitted submodule changes too when enabledLibravatar Jens Lehmann1-5/+7
When the configuration variable status.submodulesummary is not 0 or false, "git status" shows the submodule summary of the staged submodule commits. But it did not show the summary of those commits not yet staged in the supermodule, making it hard to see what will not be committed. The output of "submodule summary --for-status" has been changed from "# Modified submodules:" to "# Submodule changes to be committed:" for the already staged changes. "# Submodules changed but not updated:" has been added for changes that will not be committed. This is much clearer and consistent with the output for regular files. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>