| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
|
|
Upgrading a repository to use extensions.worktreeConfig is non-trivial.
There are several steps involved, including moving some config settings
from the common config file to the main worktree's config.worktree file.
The previous change updated the documentation with all of these details.
Commands such as 'git sparse-checkout set' upgrade the repository to use
extensions.worktreeConfig without following these steps, causing some
user pain in some special cases.
Create a helper method, init_worktree_config(), that will be used in a
later change to fix this behavior within 'git sparse-checkout set'. The
method is carefully documented in worktree.h.
Note that we do _not_ upgrade the repository format version to 1 during
this process. The worktree config extension must be considered by Git
and third-party tools even if core.repositoryFormatVersion is 0 for
historical reasons documented in 11664196ac ("Revert
"check_repository_format_gently(): refuse extensions for old
repositories"", 2020-07-15). This is a special case for this extension,
and newer extensions (such as extensions.objectFormat) still need to
upgrade the repository format version.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the now-unused "failure_errno" parameter from the
refs_resolve_ref_unsafe() signature. In my recent 96f6623ada0 (Merge
branch 'ab/refs-errno-cleanup', 2021-11-29) series we made all of its
callers explicitly request the errno via an output parameter.
As that series shows all but one caller ended up passing in a
boilerplate "ignore_errno", since they only cared about whether the
return value was NULL or not, i.e. if the ref could be resolved.
There was one small issue with that series fixed with a follow-up in
31e39123695 (Merge branch 'ab/refs-errno-cleanup', 2022-01-14) a small
bug in that series was fixed.
After those two there was one caller left in sequencer.c that used the
"failure_errno', but as of the preceding commit it uses a boilerplate
"ignore_errno" instead.
This leaves the public refs API without any use of "failure_errno" at
all. We could still do with a bit of cleanup and generalization
between refs.c and refs/files-backend.c before the "reftable"
integration lands, but that's all internal to the reference code
itself.
So let's remove this output parameter. Not only isn't it used now, but
it's unlikely that we'll want it again in the future. We'd like to
slowly move the refs API to a more file-backend independent way of
communicating error codes, having it use a "failure_errno" was only
the first step in that direction. If this or any other function needs
to communicate what specifically is wrong with the requested "refname"
it'll be better to have the function set some output enum of
well-defined error states than piggy-backend on "errno".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Storing the worktrees list in a static variable meant that
find_shared_symref() had to rebuild the list on each call (which is
inefficient when the call site is in a loop), and also that each call
invalidated the pointer returned by the previous call (which is
confusing).
Instead, make it the caller’s responsibility to pass in the worktrees
list and manage its lifetime.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the transitory refs_werrres_ref_unsafe() function to
refs_resolve_ref_unsafe(), now that all callers of the old function
have learned to pass in a "failure_errno" parameter.
The coccinelle semantic patch added in the preceding commit works, but
I couldn't figure out how to get spatch(1) to re-flow these argument
lists (and sometimes make lines way too long), so this rename was done
with:
perl -pi -e 's/refs_werrres_ref_unsafe/refs_resolve_ref_unsafe/g' \
$(git grep -l refs_werrres_ref_unsafe -- '*.c')
But after that "make contrib/coccinelle/refs.cocci.patch" comes up
empty, so the result would have been the same. Let's remove that
transitory semantic patch file, we won't need to retain it for any
other in-flight changes, refs_werrres_ref_unsafe() only existed within
this patch series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are only handful of callers of find_shared_symref(), none of
whom care about errno, so let's migrate to the non-errno-propagating
version of refs_resolve_ref_unsafe() and explicitly ignore errno here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The static add_head_info() function is only used indirectly by callers
of get_worktrees(), none of whom care about errno, and even if they
did having the faked-up one from refs_resolve_ref_unsafe() would only
confuse them if they used die_errno() et al. So let's explicitly
ignore it here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the refs_read_ref_full() wrapper in favor of migrating various
refs.c API users to the underlying refs_werrres_ref_unsafe() function.
A careful reading of these callers shows that the callers of this
function did not care about "errno", by moving away from the
refs_resolve_ref_unsafe() wrapper we can be sure that nothing relies
on it anymore.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
worktree_lock_reason() aborts with an assertion failure when called on
the main worktree since locking the main worktree is nonsensical. Not
only is this behavior undocumented, thus callers might not even be aware
that the call could potentially crash the program, but it also forces
clients to be extra careful:
if (!is_main_worktree(wt) && worktree_locked_reason(...))
...
Since we know that locking makes no sense in the context of the main
worktree, we can simply return false for the main worktree, thus making
client code less complex by eliminating the need for the callers to have
inside knowledge about the implementation:
if (worktree_lock_reason(...))
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add worktree_prune_reason() to allow a caller to discover whether a
worktree is prunable and the reason that it is, much like
worktree_lock_reason() indicates whether a worktree is locked and the
reason for the lock. As with worktree_lock_reason(), retrieve the
prunable reason lazily and cache it in the `worktree` structure.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of teaching "git worktree list" to annotate worktree that is a
candidate for pruning, let's move should_prune_worktree() from
builtin/worktree.c to worktree.c in order to make part of the worktree
public API.
should_prune_worktree() knows how to select the given worktree for
pruning based on an expiration date, however the expiration value is
stored in a static file-scope variable and it is not local to the
function. In order to move the function, teach should_prune_worktree()
to take the expiration date as an argument and document the new
parameter that is not immediately obvious.
Also, change the function comment to clearly state that the worktree's
path is returned in `wtpath` argument.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git worktree repair` knows how to repair the two-way links between the
repository and a worktree as long as a link in one or the other
direction is sound. For instance, if a linked worktree is moved (without
using `git worktree move`), repair is possible because the worktree
still knows the location of the repository even though the repository no
longer knows where the worktree is. Similarly, if the repository is
moved, repair is possible since the repository still knows the locations
of the worktrees even though the worktrees no longer know where the
repository is.
However, if both the repository and the worktrees are moved, then links
are severed in both directions, and no repair is possible. This is the
case even when the new worktree locations are specified as arguments to
`git worktree repair`. The reason for this limitation is twofold. First,
when `repair` consults the worktree's gitfile (/path/to/worktree/.git)
to determine the corresponding <repo>/worktrees/<id>/gitdir file to fix,
<repo> is the old path to the repository, thus it is unable to fix the
`gitdir` file at its new location since it doesn't know where it is.
Second, when `repair` consults <repo>/worktrees/<id>/gitdir to find the
location of the worktree's gitfile (/path/to/worktree/.git), the path
recorded in `gitdir` is the old location of the worktree's gitfile, thus
it is unable to repair the gitfile since it doesn't know where it is.
Fix these shortcomings by teaching `repair` to attempt to infer the new
location of the <repo>/worktrees/<id>/gitdir file when the location
recorded in the worktree's gitfile has become stale but the file is
otherwise well-formed. The inference is intentionally simple-minded.
For each worktree path specified as an argument, `git worktree repair`
manually reads the ".git" gitfile at that location and, if it is
well-formed, extracts the <id>. It then searches for a corresponding
<id> in <repo>/worktrees/ and, if found, concludes that there is a
reasonable match and updates <repo>/worktrees/<id>/gitdir to point at
the specified worktree path. In order for <repo> to be known, `git
worktree repair` must be run in the main worktree or bare repository.
`git worktree repair` first attempts to repair each incoming
/path/to/worktree/.git gitfile to point at the repository, and then
attempts to repair outgoing <repo>/worktrees/<id>/gitdir files to point
at the worktrees. This sequence was chosen arbitrarily when originally
implemented since the order of fixes is immaterial as long as one side
of the two-way link between the repository and a worktree is sound.
However, for this new repair technique to work, the order must be
reversed. This is because the new inference mechanism, when it is
successful, allows the outgoing <repo>/worktrees/<id>/gitdir file to be
repaired, thus fixing one side of the two-way link. Once that side is
fixed, the other side can be fixed by the existing repair mechanism,
hence the order of repairs is now significant.
Two safeguards are employed to avoid hijacking a worktree from a
different repository if the user accidentally specifies a foreign
worktree as an argument. The first, as described above, is that it
requires an <id> match between the repository and the worktree. That
itself is not foolproof for preventing hijack, so the second safeguard
is that the inference will only kick in if the worktree's
/path/to/worktree/.git gitfile does not point at a repository.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ma/worktree-cleanups:
worktree: use skip_prefix to parse target
worktree: rename copy-pasted variable
worktree: update renamed variable in comment
worktree: inline `worktree_ref()` into its only caller
wt-status: introduce wt_status_state_free_buffers()
wt-status: print to s->fp, not stdout
wt-status: replace sha1 mentions with oid
|
|
Instead of checking for "refs/heads/" using `starts_with()`, then
skipping past "refs/heads/" using `strlen()`, just use `skip_prefix()`.
In `is_worktree_being_rebased()`, we can adjust the indentation while
we're here and lose a pair of parentheses which isn't needed and which
might even make the reader wonder what they're missing and why that
grouping is there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the commit message of 04a3dfb8b5 ("worktree.c: check whether branch
is bisected in another worktree", 2016-04-22) indicates, the function
`is_worktree_being_bisected()` is based on the older function
`is_worktree_being_rebased()`. This heritage can also be seen in the
name of the variable where we store our return value: It was never
adapted while copy-editing and remains as `found_rebase`.
Rename the variable to make clear that we're looking for a bisect(ion),
nothing else.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comment above `add_head_info()` mentions "head_sha1", but it was
renamed to "head_oid" in 0f05154c70 ("worktree: convert struct worktree
to object_id", 2017-10-15). Update the comment.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have `strbuf_worktree_ref()`, which works on a strbuf, and a wrapper
for it, `worktree_ref()` which returns a string. We even make this
wrapper available through worktree.h. But it only has a single caller,
sitting right next to it in worktree.c.
Just inline the wrapper into its only caller. This means the caller can
quite naturally reuse a single strbuf. We currently achieve something
similar by having a static strbuf in the wrapper.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we have a `struct wt_status_state`, we manually free its `branch`,
`onto` and `detached_from`, or sometimes just one or two of them.
Provide a function `wt_status_state_free_buffers()` which does the
freeing.
The callers are still aware of these fields, e.g., they check whether
`branch` was populated or not. But this way, they don't need to know
about *all* of them, and if `struct wt_status_state` gets more fields,
they will not need to learn to free them.
Users of `struct wt_status` (which contains a `wt_status_state`) already
have `wt_status_collect_free_buffers()` (corresponding to
`wt_status_collect()`) which we can also teach to use this new helper.
Finally, note that we're currently leaving dangling pointers behind.
Some callers work on a stack-allocated struct, where this is obviously
ok. But for the users of `run_status()` in builtin/commit.c, there are
ample opportunities for someone to mistakenly use those dangling
pointers. We seem to be ok for now, but it's a use-after-free waiting to
happen. Let's leave NULL-pointers behind instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .git/worktrees/<id>/gitdir file points at the location of a linked
worktree's .git file. Its content must be of the form
/path/to/worktree/.git (from which the location of the worktree itself
can be derived by stripping the "/.git" suffix). If the gitdir file is
deleted or becomes corrupted or outdated, then Git will be unable to
find the linked worktree. An easy way for the gitdir file to become
outdated is for the user to move the worktree manually (without using
"git worktree move"). Although it is possible to manually update the
gitdir file to reflect the new linked worktree location, doing so
requires a level of knowledge about worktree internals beyond what a
user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
.git/worktrees/<id>/gitdir files automatically. (For this to work, the
command must either be invoked from within the worktree whose gitdir
file requires repair, or from within the main or any linked worktree by
providing the path of the broken worktree as an argument to "git
worktree repair".)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .git file in a linked worktree is a "gitfile" which points back to
the .git/worktrees/<id> entry in the main worktree or bare repository.
If a worktree's .git file is deleted or becomes corrupted or outdated,
then the linked worktree won't know how to find the repository or any of
its own administrative files (such as 'index', 'HEAD', etc.). An easy
way for the .git file to become outdated is for the user to move the
main worktree or bare repository. Although it is possible to manually
update each linked worktree's .git file to reflect the new repository
location, doing so requires a level of knowledge about worktree
internals beyond what a user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
worktree .git files automatically. (For this to work, the command must
be invoked from within the main worktree or bare repository, or from
within a worktree which has not become disconnected from the repository
-- such as one which was created after the repository was moved.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order for "git-worktree list" to present consistent results,
get_main_worktree() performs manual normalization on the repository
path (returned by get_common_dir()) after passing it through
strbuf_add_absolute_path(). In particular, it cleans up the path for
three distinct cases when the current working directory is (1) the main
worktree, (2) the .git/ subdirectory, or (3) a bare repository.
The need for such special-cases is a direct consequence of employing
strbuf_add_absolute_path() which, for the sake of efficiency, doesn't
bother normalizing the path (such as folding out redundant path
components) after making it absolute. Lack of normalization is not
typically a problem since redundant path elements make no difference
when working with paths at the filesystem level. However, when preparing
paths for presentation, possible redundant path components make it
difficult to ensure consistency.
Eliminate the need for these special cases by instead making the path
absolute via strbuf_add_real_path() which normalizes the path for us.
Once normalized, the only case we need to handle manually is converting
it to the path of the main worktree by stripping the "/.git" suffix.
This stripping of the "/.git" suffix is a regular idiom in
worktree-related code; for instance, it is employed by
get_linked_worktree(), as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The content of .git/worktrees/<id>/gitdir must be a path of the form
"/path/to/worktree/.git". Any other content would be indicative of a
corrupt "gitdir" file. To determine the path of the worktree itself one
merely strips the "/.git" suffix, and this is indeed how the worktree
path was determined from inception.
However, 5193490442 (worktree: add a function to get worktree details,
2015-10-08) extended the path manipulation in a mysterious way. If it is
unable to strip "/.git" from the path, then it instead reports the
current working directory as the linked worktree's path:
if (!strbuf_strip_suffix(&worktree_path, "/.git")) {
strbuf_reset(&worktree_path);
strbuf_add_absolute_path(&worktree_path, ".");
strbuf_strip_suffix(&worktree_path, "/.");
}
This logic is clearly bogus; it can never be generally correct behavior.
It materialized out of thin air in 5193490442 with neither explanation
nor tests to illustrate a case in which it would be desirable.
It's possible that this logic was introduced to somehow deal with a
corrupt "gitdir" file, so that it returns _some_ sort of meaningful
value, but returning the current working directory is not helpful. In
fact, it is quite misleading (except in the one specific case when the
current directory is the worktree whose "gitdir" entry is corrupt).
Moreover, reporting the corrupt value to the user, rather than fibbing
about it and hiding it outright, is more helpful since it may aid in
diagnosing the problem.
Therefore, drop this bogus path munging and restore the logic to the
original behavior of merely stripping "/.git".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This code has been unused since fa099d2322 (worktree.c: kill parse_ref()
in favor of refs_resolve_ref_unsafe(), 2017-04-24), so drop it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The content of this strbuf is unconditionally detached several lines
before the strbuf_release() and the strbuf is never touched again after
that point.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* es/worktree-code-cleanup:
worktree: avoid dead-code in conditional
|
|
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
|
|
get_worktrees() retrieves a list of all worktrees associated with a
repository, including the main worktree. The location of the main
worktree is determined by get_main_worktree() which needs to handle
three distinct cases for the main worktree after absolute-path
conversion:
* <bare-repository>/.
* <main-worktree>/.git/. (when $CWD is .git)
* <main-worktree>/.git (when $CWD is any worktree)
They all need to be normalized to just the <path> portion, dropping any
"/." or "/.git" suffix.
It turns out, however, that get_main_worktree() was only handling the
first and last cases, i.e.:
if (!strip_suffix(path, "/.git"))
strip_suffix(path, "/.");
This shortcoming was addressed by 45f274fbb1 (get_main_worktree(): allow
it to be called in the Git directory, 2020-02-23) by changing the logic
to:
strip_suffix(path, "/.");
if (!strip_suffix(path, "/.git"))
strip_suffix(path, "/.");
which makes the final strip_suffix() invocation dead-code.
Fix this oversight by enumerating the three distinct cases explicitly
rather than attempting to strip the suffix(es) incrementally.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Of all the clients of get_worktrees(), only "git worktree list" wants
the list sorted in a very specific way; other clients simply don't care
about the order. Rather than imbuing get_worktrees() with special
knowledge about how various clients -- now and in the future -- may want
the list sorted, drop the sorting capability altogether and make it the
client's responsibility to sort the list if needed.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 transition continues.
* bc/sha-256-part-1-of-4: (22 commits)
fast-import: add options for rewriting submodules
fast-import: add a generic function to iterate over marks
fast-import: make find_marks work on any mark set
fast-import: add helper function for inserting mark object entries
fast-import: permit reading multiple marks files
commit: use expected signature header for SHA-256
worktree: allow repository version 1
init-db: move writing repo version into a function
builtin/init-db: add environment variable for new repo hash
builtin/init-db: allow specifying hash algorithm on command line
setup: allow check_repository_format to read repository format
t/helper: make repository tests hash independent
t/helper: initialize repository if necessary
t/helper/test-dump-split-index: initialize git repository
t6300: make hash algorithm independent
t6300: abstract away SHA-1-specific constants
t: use hash-specific lookup tables to define test constants
repository: require a build flag to use SHA-256
hex: add functions to parse hex object IDs in any algorithm
hex: introduce parsing variants taking hash algorithms
...
|
|
This commit continues the work started with previous commit.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" should stop from updating a branch that is checked out
when receive.denyCurrentBranch configuration is set, but it failed
to pay attention to checkouts in secondary worktrees. This has
been corrected.
* hv/receive-denycurrent-everywhere:
t2402: test worktree path when called in .git directory
receive.denyCurrentBranch: respect all worktrees
t5509: use a bare repository for test push target
get_main_worktree(): allow it to be called in the Git directory
|
|
In rare cases "git worktree add <path>" could think that <path>
was already a registered worktree even when it wasn't and refuse
to add the new worktree. This has been corrected.
* es/worktree-avoid-duplication-fix:
worktree: don't allow "add" validation to be fooled by suffix matching
worktree: add utility to find worktree by pathname
worktree: improve find_worktree() documentation
|
|
find_worktree() employs heuristics to match user provided input -- which
may be a pathname or some sort of shorthand -- with an actual worktree.
Although this convenience allows a user to identify a worktree with
minimal typing, the black-box nature of these heuristics makes it
potentially difficult for callers which already know the exact path of a
worktree to be confident that the correct worktree will be returned for
any specific pathname (particularly a relative one), especially as the
heuristics are enhanced and updated.
Therefore, add a companion function, find_worktree_by_path(), which
deterministically identifies a worktree strictly by pathname with no
interpretation and no magic matching.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This code has been unused since fa099d2322 (worktree.c: kill parse_ref()
in favor of refs_resolve_ref_unsafe(), 2017-04-24), so drop it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When called in the Git directory of a non-bare repository, this function
would not return the directory of the main worktree, but of the Git
directory instead.
The reason: when the Git directory is the current working directory, the
absolute path of the common directory will be reported with a trailing
`/.git/.`, which the code of `get_main_worktree()` does not handle
correctly.
Let's fix this.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git supports both repository versions 0 and 1. These formats are
identical except for the presence of extensions. When using an
extension, such as for a different hash algorithm, a check for only
version 0 causes the check to fail. Instead, call
verify_repository_format to verify that we have an appropriate version
and no unknown extensions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree add" used to fail when another worktree connected to
the same repository was corrupt, which has been corrected.
* nd/corrupt-worktrees:
worktree add: be tolerant of corrupt worktrees
|
|
find_worktree() can die() unexpectedly because it uses real_path()
instead of the gentler version. When it's used in 'git worktree add' [1]
and there's a bad worktree, this die() could prevent people from adding
new worktrees.
The "bad" condition to trigger this is when a parent of the worktree's
location is deleted. Then real_path() will complain.
Use the other version so that bad worktrees won't affect 'worktree
add'. The bad ones will eventually be pruned, we just have to tolerate
them for a bit.
[1] added in cb56f55c16 (worktree: disallow adding same path multiple
times, 2018-08-28), or since v2.20.0. Though the real bug in
find_worktree() is much older.
Reported-by: Shaheed Haque <shaheedhaque@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic to tell if a Git repository has a working tree protects
"git branch -D" from removing the branch that is currently checked
out by mistake. The implementation of this logic was broken for
repositories with unusual name, which unfortunately is the norm for
submodules these days. This has been fixed.
* jt/submodule-repo-is-with-worktree:
worktree: update is_bare heuristics
|
|
When "git branch -D <name>" is run, Git usually first checks if that
branch is currently checked out. But this check is not performed if the
Git directory of that repository is not at "<repo>/.git", which is the
case if that repository is a submodule that has its Git directory stored
as "super/.git/modules/<repo>", for example. This results in the branch
being deleted even though it is checked out.
This is because get_main_worktree() in worktree.c sets is_bare on a
worktree only using the heuristic that a repo is bare if the worktree's
path does not end in "/.git", and not bare otherwise. This is_bare code
was introduced in 92718b7438 ("worktree: add details to the worktree
struct", 2015-10-08), following a pre-core.bare heuristic. This patch
does 2 things:
- Teach get_main_worktree() to use is_bare_repository() instead,
introduced in 7d1864ce67 ("Introduce is_bare_repository() and
core.bare configuration variable", 2007-01-07) and updated in
e90fdc39b6 ("Clean up work-tree handling", 2007-08-01). This solves
the "git branch -D <name>" problem described above. However...
- If a repository has core.bare=1 but the "git" command is being run
from one of its secondary worktrees, is_bare_repository() returns
false (which is fine, since there is a worktree available). However,
treating the main worktree as non-bare when it is bare causes issues:
for example, failure to delete a branch from a secondary worktree
that is referred to by a main worktree's HEAD, even if that main
worktree is bare.
In order to avoid that, also check core.bare when setting is_bare. If
core.bare=1, trust it, and otherwise, use is_bare_repository().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.
Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.
Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.
Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)
We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
|
|
A function prefixed with 'is_' would be expected to return a boolean,
however this function returns a string.
Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make use of the new ref aliases to pass refs from another worktree
around and access them from the current ref store instead. This does
not change any functionality, but when a problem arises, we would like
the reported messages to mention full ref aliases, like this:
fatal: bad object worktrees/ztemp/HEAD
warning: reflog of 'main-worktree/HEAD' references pruned commits
instead of
fatal: bad object HEAD
warning: reflog of 'HEAD' references pruned commits
which does not really tell where the refs are from.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the problems with multiple worktree is accessing per-worktree
refs of one worktree from another worktree. This was sort of solved by
multiple ref store, where the code can open the ref store of another
worktree and has access to the ref space of that worktree.
The problem with this is reporting. "HEAD" in another ref space is
also called "HEAD" like in the current ref space. In order to
differentiate them, all the code must somehow carry the ref store
around and print something like "HEAD from this ref store".
But that is not feasible (or possible with a _lot_ of work). With the
current design, we pass a reference around as a string (so called
"refname"). Extending this design to pass a string _and_ a ref store
is a nightmare, especially when handling extended SHA-1 syntax.
So we do it another way. Instead of entering a separate ref space, we
make refs from other worktrees available in the current ref space. So
"HEAD" is always HEAD of the current worktree, but then we can have
"worktrees/blah/HEAD" to denote HEAD from a worktree named
"blah". This syntax coincidentally matches the underlying directory
structure which makes implementation a bit easier.
The main worktree has to be treated specially because well... it's
special from the beginning. So HEAD from the main worktree is
acccessible via the name "main-worktree/HEAD" instead of
"worktrees/main/HEAD" because "main" could be just another secondary
worktree.
This patch also makes it possible to specify refs from one worktree in
another one, e.g.
git log worktrees/foo/HEAD
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Derrick Stolee
Ævar Arnfjörð Bjarmason
Anders Kaseorg
Elijah Newren
René Scharfe
Rafael Silva
Eric Sunshine
Martin Ågren
Alexandr Miloslavskiy
Hariom Verma
brian m. carlson
Nguyễn Thái Ngọc Duy
Jonathan Tan
Nickolai Belakovski