summaryrefslogtreecommitdiff
path: root/utf8.c
AgeCommit message (Collapse)AuthorFilesLines
2015-01-07Merge branch 'maint-2.1' into maintLibravatar Junio C Hamano1-12/+20
* maint-2.1: is_hfs_dotgit: loosen over-eager match of \u{..47}
2015-01-07Merge branch 'maint-2.0' into maint-2.1Libravatar Junio C Hamano1-12/+20
* maint-2.0: is_hfs_dotgit: loosen over-eager match of \u{..47}
2015-01-07Merge branch 'maint-1.9' into maint-2.0Libravatar Junio C Hamano1-12/+20
* maint-1.9: is_hfs_dotgit: loosen over-eager match of \u{..47}
2015-01-07Merge branch 'maint-1.8.5' into maint-1.9Libravatar Junio C Hamano1-12/+20
* maint-1.8.5: is_hfs_dotgit: loosen over-eager match of \u{..47}
2014-12-29is_hfs_dotgit: loosen over-eager match of \u{..47}Libravatar Jeff King1-12/+20
Our is_hfs_dotgit function relies on the hackily-implemented next_hfs_char to give us the next character that an HFS+ filename comparison would look at. It's hacky because it doesn't implement the full case-folding table of HFS+; it gives us just enough to see if the path matches ".git". At the end of next_hfs_char, we use tolower() to convert our 32-bit code point to lowercase. Our tolower() implementation only takes an 8-bit char, though; it throws away the upper 24 bits. This means we can't have any false negatives for is_hfs_dotgit. We only care about matching 7-bit ASCII characters in ".git", and we will correctly process 'G' or 'g'. However, we _can_ have false positives. Because we throw away the upper bits, code point \u{0147} (for example) will look like 'G' and get downcased to 'g'. It's not known whether a sequence of code points whose truncation ends up as ".git" is meaningful in any language, but it does not hurt to be more accurate here. We can just pass out the full 32-bit code point, and compare it manually to the upper and lowercase characters we care about. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-17Sync with v2.1.4Libravatar Junio C Hamano1-0/+64
* maint-2.1: Git 2.1.4 Git 2.0.5 Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17Sync with v2.0.5Libravatar Junio C Hamano1-0/+64
* maint-2.0: Git 2.0.5 Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17Sync with v1.9.5Libravatar Junio C Hamano1-0/+64
* maint-1.9: Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17Sync with v1.8.5.6Libravatar Junio C Hamano1-0/+64
* maint-1.8.5: Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17utf8: add is_hfs_dotgit() helperLibravatar Jeff King1-0/+64
We do not allow paths with a ".git" component to be added to the index, as that would mean repository contents could overwrite our repository files. However, asking "is this path the same as .git" is not as simple as strcmp() on some filesystems. HFS+'s case-folding does more than just fold uppercase into lowercase (which we already handle with strcasecmp). It may also skip past certain "ignored" Unicode code points, so that (for example) ".gi\u200ct" is mapped ot ".git". The full list of folds can be found in the tables at: https://www.opensource.apple.com/source/xnu/xnu-1504.15.3/bsd/hfs/hfscommon/Unicode/UCStringCompareData.h Implementing a full "is this path the same as that path" comparison would require us importing the whole set of tables. However, what we want to do is much simpler: we only care about checking ".git". We know that 'G' is the only thing that folds to 'g', and so on, so we really only need to deal with the set of ignored code points, which is much smaller. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-19Merge branch 'rs/export-strbuf-addchars'Libravatar Junio C Hamano1-7/+0
Code clean-up. * rs/export-strbuf-addchars: strbuf: use strbuf_addchars() for adding a char multiple times strbuf: export strbuf_addchars()
2014-09-09Merge branch 'nd/strbuf-utf8-replace'Libravatar Junio C Hamano1-0/+3
* nd/strbuf-utf8-replace: utf8.c: fix strbuf_utf8_replace() consuming data beyond input string
2014-09-08strbuf: export strbuf_addchars()Libravatar René Scharfe1-7/+0
Move strbuf_addchars() to strbuf.c, where it belongs, and make it available for other callers. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-11utf8.c: fix strbuf_utf8_replace() consuming data beyond input stringLibravatar Nguyễn Thái Ngọc Duy1-0/+3
The main loop in strbuf_utf8_replace() could summed up as: while ('src' is still valid) { 1) advance 'src' to copy ANSI escape sequences 2) advance 'src' to copy/replace visible characters } The problem is after #1, 'src' may have reached the end of the string (so 'src' points to NUL) and #2 will continue to copy that NUL as if it's a normal character. Because the output is stored in a strbuf, this NUL accounted in the 'len' field as well. Check after #1 and break the loop if necessary. The test does not look obvious, but the combination of %>>() should make a call trace like this show_log() pretty_print_commit() format_commit_message() strbuf_expand() format_commit_item() format_and_pad_commit() strbuf_utf8_replace() where %C(auto)%d would insert a color reset escape sequence in the end of the string given to strbuf_utf8_replace() and show_log() uses fwrite() to send everything to stdout (including the incorrect NUL inserted by strbuf_utf8_replace) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-06Merge branch 'tb/unicode-6.3-zero-width'Libravatar Junio C Hamano1-69/+7
Update the logic to compute the display width needed for utf8 strings and allow us to more easily maintain the tables used in that logic. We may want to let the users choose if codepoints with ambiguous widths are treated as a double or single width in a follow-up patch. * tb/unicode-6.3-zero-width: utf8: make it easier to auto-update git_wcwidth() utf8.c: use a table for double_width
2014-05-12utf8: make it easier to auto-update git_wcwidth()Libravatar Torsten Bögershausen1-59/+2
The function git_wcwidth() returns for a given unicode code point the width on the display: -1 for control characters, 0 for combining or other non-visible code points 1 for e.g. ASCII 2 for double-width code points. This table had been originally been extracted for one Unicode version, probably 3.2. We now use two tables these days, one for zero-width and another for double-width. Make it easier to update these tables to a later version of Unicode by factoring out the table from utf8.c into unicode_width.h and add the script update_unicode.sh to update the table based on the latest Unicode specification files. Thanks to Peter Krefting <peter@softwolves.pp.se> and Kevin Bracey <kevin@bracey.fi> for helping with their Unicode knowledge. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-12utf8.c: use a table for double_widthLibravatar Torsten Bögershausen1-23/+18
Refactor git_wcwidth() and replace the if-else-if chain. Use the table double_width which is scanned by the bisearch() function, which is already used to find combining code points. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-16Merge branch 'tb/unicode-6.3-zero-width'Libravatar Junio C Hamano1-5/+4
Teach our display-column-counting logic about decomposed umlauts and friends. * tb/unicode-6.3-zero-width: utf8.c: partially update to version 6.3
2014-04-09utf8.c: partially update to version 6.3Libravatar Torsten Bögershausen1-5/+4
Unicode 6.3 defines more code points as combining or accents. For example, the character "ö" could be expressed as an "o" followed by U+0308 COMBINING DIARESIS (aka umlaut, double-dot-above). We should consider that such a sequence of two codepoints occupies one display column for the alignment purposes, and for that, git_wcwidth() should return 0 for them. Affected codepoints are: U+0358..U+035C U+0487 U+05A2, U+05BA, U+05C5, U+05C7 U+0604, U+0616..U+061A, U+0659..U+065F Earlier unicode standards had defined these as "reserved". Only the range 0..U+07FF has been checked to see which codepoints need to be marked as 0-width while preparing for this commit; more updates may be needed. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18utf8: use correct type for values in interval tableLibravatar John Keeping1-2/+2
We treat these as unsigned everywhere and compare against unsigned values, so declare them using the typedef we already have for this. While we're here, fix the indentation as well. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18utf8: fix iconv error detectionLibravatar John Keeping1-1/+1
iconv(3) returns "(size_t) -1" on error. Make sure that we cast the "-1" properly when checking for this. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-28pretty: Fix bug in truncation support for %>, %< and %><Libravatar Ramsay Jones1-2/+2
Some systems experience failures in t4205-*.sh (tests 18-20, 27) which all relate to the use of truncation with the %< padding placeholder. This capability was added in the commit a7f01c6b ("pretty: support truncating in %>, %< and %><", 19-04-2013). The truncation support was implemented with the assistance of a new strbuf function (strbuf_utf8_replace). This function contains the following code: strbuf_attach(sb_src, strbuf_detach(&sb_dst, NULL), sb_dst.len, sb_dst.alloc); Unfortunately, this code is subject to unspecified behaviour. In particular, the order of evaluation of the argument expressions (along with the associated side effects) is not specified by the C standard. Note that the second argument expression is a call to strbuf_detach() which, as a side effect, sets the 'len' and 'alloc' fields of the sb_dst argument to zero. Depending on the order of evaluation of the argument expressions to the strbuf_attach call, this can lead to assigning an empty string to 'sb_src'. In order to remove the undesired behaviour, we replace the above line of code with: strbuf_swap(sb_src, &sb_dst); strbuf_release(&sb_dst); which achieves the desired effect without provoking unspecified behaviour. Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-18pretty: support %>> that steal trailing spacesLibravatar Nguyễn Thái Ngọc Duy1-1/+1
This is pretty useful in `%<(100)%s%Cred%>(20)% an' where %s does not use up all 100 columns and %an needs more than 20 columns. By replacing %>(20) with %>>(20), %an can steal spaces from %s. %>> understands escape sequences, so %Cred does not stop it from stealing spaces in %<(100). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-18pretty: support truncating in %>, %< and %><Libravatar Nguyễn Thái Ngọc Duy1-0/+46
%>(N,trunc) truncates the right part after N columns and replace the last two letters with "..". ltrunc does the same on the left. mtrunc cuts the middle out. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-18utf8.c: add reencode_string_len() that can handle NULs in stringLibravatar Nguyễn Thái Ngọc Duy1-3/+7
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-18utf8.c: add utf8_strnwidth() with the ability to skip ansi sequencesLibravatar Nguyễn Thái Ngọc Duy1-6/+14
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-18utf8.c: move display_mode_esc_sequence_len() for use by other functionsLibravatar Nguyễn Thái Ngọc Duy1-14/+14
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-25Merge branch 'ks/rfc2047-one-char-at-a-time'Libravatar Junio C Hamano1-0/+39
When "format-patch" quoted a non-ascii strings on the header files, it incorrectly applied rfc2047 and chopped a single character in the middle of it. * ks/rfc2047-one-char-at-a-time: format-patch: RFC 2047 says multi-octet character may not be split
2013-03-21Merge branch 'jk/utf-8-can-be-spelled-differently'Libravatar Junio C Hamano1-2/+18
Some platforms and users spell UTF-8 differently; retry with the most official "UTF-8" when the system does not understand the user-supplied encoding name that are the common alternative spellings of UTF-8. * jk/utf-8-can-be-spelled-differently: utf8: accept alternate spellings of UTF-8
2013-03-09format-patch: RFC 2047 says multi-octet character may not be splitLibravatar Kirill Smelkov1-0/+39
Even though an earlier attempt (bafc478..41dd00bad) cleaned up RFC 2047 encoding, pretty.c::add_rfc2047() still decides where to split the output line by going through the input one byte at a time, and potentially splits a character in the middle. A subject line may end up showing like this: ".... fö?? bar". (instead of ".... föö bar".) if split incorrectly. RFC 2047, section 5 (3) explicitly forbids such beaviour Each 'encoded-word' MUST represent an integral number of characters. A multi-octet character may not be split across adjacent 'encoded- word's. that means that e.g. for Subject: .... föö bar encoding Subject: =?UTF-8?q?....=20f=C3=B6=C3=B6?= =?UTF-8?q?=20bar?= is correct, and Subject: =?UTF-8?q?....=20f=C3=B6=C3?= <-- NOTE ö is broken here =?UTF-8?q?=B6=20bar?= is not, because "ö" character UTF-8 encoding C3 B6 is split here across adjacent encoded words. To fix the problem, make the loop grab one _character_ at a time and determine its output length to see where to break the output line. Note that this version only knows about UTF-8, but the logic to grab one character is abstracted out in mbs_chrlen() function to make it possible to extend it to other encodings with the help of iconv in the future. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-25utf8: accept alternate spellings of UTF-8Libravatar Jeff King1-2/+18
The iconv implementation on many platforms will accept variants of UTF-8, including "UTF8", "utf-8", and "utf8", but some do not. We make allowances in our code to treat them all identically, but we sometimes hand the string from the user directly to iconv. In this case, the platform iconv may or may not work. There are really four levels of platform iconv support for these synonyms: 1. All synonyms understood (e.g., glibc). 2. Only the official "UTF-8" understood (e.g., Windows). 3. Official "UTF-8" not understood, but some other synonym understood (it's not known whether such a platform exists). 4. Neither "UTF-8" nor any synonym understood (e.g., ancient systems, or ones without utf8 support installed). This patch teaches git to fall back to using the official "UTF-8" spelling when iconv_open fails (and the encoding was one of the synonym spellings). This makes things more convenient to users of type 2 systems, as they can now use any of the synonyms for the log output encoding. Type 1 systems are not affected, as iconv already works on the first try. Type 4 systems are not affected, as both attempts already fail. Type 3 systems will not benefit from the feature, but because we only use "UTF-8" as a fallback, they will not be regressed (i.e., you can continue to use "utf8" if your platform supports it). We could try all the various synonyms, but since such systems are not even known to exist, it's not worth the effort. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-14Merge branch 'jx/utf8-printf-width'Libravatar Junio C Hamano1-0/+21
Use a new helper that prints a message and counts its display width to align the help messages parse-options produces. * jx/utf8-printf-width: Add utf8_fprintf helper that returns correct number of columns
2013-02-11Add utf8_fprintf helper that returns correct number of columnsLibravatar Jiang Xin1-0/+21
Since command usages can be translated, they may include utf-8 encoded strings, and the output in console may not align well any more. This is because strlen() is different from strwidth() on utf-8 strings. A wrapper utf8_fprintf() can help to return the correct number of columns required. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-02Merge branch 'sp/shortlog-missing-lf'Libravatar Junio C Hamano1-7/+6
When a line to be wrapped has a solid run of non space characters whose length exactly is the wrap width, "git shortlog -w" failed to add a newline after such a line. * sp/shortlog-missing-lf: strbuf_add_wrapped*(): Remove unused return value shortlog: fix wrapping lines of wraplen
2012-12-11strbuf_add_wrapped*(): Remove unused return valueLibravatar Steffen Prohaska1-7/+6
Since shortlog isn't using the return value anymore (see previous commit), the functions can be changed to void. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-07Merge branch 'jc/same-encoding' into maintLibravatar Junio C Hamano1-0/+7
Various codepaths checked if two encoding names are the same using ad-hoc code and some of them ended up asking iconv() to convert between "utf8" and "UTF-8". The former is not a valid way to spell the encoding name, but often people use it by mistake, and we equated them in some but not all codepaths. Introduce a new helper function to make these codepaths consistent. * jc/same-encoding: reencode_string(): introduce and use same_encoding()
2012-11-20Merge branch 'js/format-2047' into maintLibravatar Junio C Hamano1-1/+1
Various rfc2047 quoting issues around a non-ASCII name on the From: line in the output from format-patch have been corrected. * js/format-2047: format-patch tests: check quoting/encoding in To: and Cc: headers format-patch: fix rfc2047 address encoding with respect to rfc822 specials format-patch: make rfc2047 encoding more strict format-patch: introduce helper function last_line_length() format-patch: do not wrap rfc2047 encoded headers too late format-patch: do not wrap non-rfc2047 headers too early utf8: fix off-by-one wrapping of text
2012-11-15Merge branch 'jc/same-encoding'Libravatar Junio C Hamano1-0/+7
Various codepaths checked if two encoding names are the same using ad-hoc code and some of them ended up asking iconv() to convert between "utf8" and "UTF-8". The former is not a valid way to spell the encoding name, but often people use it by mistake, and we equated them in some but not all codepaths. Introduce a new helper function to make these codepaths consistent. * jc/same-encoding: reencode_string(): introduce and use same_encoding() Conflicts: builtin/mailinfo.c
2012-11-09Merge branch 'js/format-2047'Libravatar Jeff King1-1/+1
Fixes many rfc2047 quoting issues in the output from format-patch. * js/format-2047: format-patch tests: check quoting/encoding in To: and Cc: headers format-patch: fix rfc2047 address encoding with respect to rfc822 specials format-patch: make rfc2047 encoding more strict format-patch: introduce helper function last_line_length() format-patch: do not wrap rfc2047 encoded headers too late format-patch: do not wrap non-rfc2047 headers too early utf8: fix off-by-one wrapping of text
2012-11-04reencode_string(): introduce and use same_encoding()Libravatar Junio C Hamano1-0/+7
Callers of reencode_string() that re-encodes a string from one encoding to another all used ad-hoc way to bypass the case where the input and the output encodings are the same. Some did strcmp(), some did strcasecmp(), yet some others when converting to UTF-8 used is_encoding_utf8(). Introduce same_encoding() helper function to make these callers use the same logic. Notably, is_encoding_utf8() has a work-around for common misconfiguration to use "utf8" to name UTF-8 encoding, which does not match "UTF-8" hence strcasecmp() would not consider the same. Make use of it in this helper function. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-18utf8: fix off-by-one wrapping of textLibravatar Jan H. Schönherr1-1/+1
The wrapping logic in strbuf_add_wrapped_text() does currently not allow lines that entirely fill the allowed width, instead it wraps the line one character too early. For example, the text "This is the sixth commit." formatted via "%w(11,1,2)" (wrap at 11 characters, 1 char indent of first line, 2 char indent of following lines) results in four lines: " This is", " the", " sixth", " commit." This is wrong, because " the sixth" is exactly 11 characters long, and thus allowed. Fix this by allowing the (width+1) character of a line to be a valid wrapping point if it is a whitespace character. Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-08git on Mac OS and precomposed unicodeLibravatar Torsten Bögershausen1-10/+16
Mac OS X mangles file names containing unicode on file systems HFS+, VFAT or SAMBA. When a file using unicode code points outside ASCII is created on a HFS+ drive, the file name is converted into decomposed unicode and written to disk. No conversion is done if the file name is already decomposed unicode. Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same result as open("\x41\xcc\x88",...) with a decomposed "Ä". As a consequence, readdir() returns the file names in decomposed unicode, even if the user expects precomposed unicode. Unlike on HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in precomposed unicode, but readdir() still returns file names in decomposed unicode. When a git repository is stored on a network share using SAMBA, file names are send over the wire and written to disk on the remote system in precomposed unicode, but Mac OS X readdir() returns decomposed unicode to be compatible with its behaviour on HFS+ and VFAT. The unicode decomposition causes many problems: - The names "git add" and other commands get from the end user may often be precomposed form (the decomposed form is not easily input from the keyboard), but when the commands read from the filesystem to see what it is going to update the index with already is on the filesystem, readdir() will give decomposed form, which is different. - Similarly "git log", "git mv" and all other commands that need to compare pathnames found on the command line (often but not always precomposed form; a command line input resulting from globbing may be in decomposed) with pathnames found in the tree objects (should be precomposed form to be compatible with other systems and for consistency in general). - The same for names stored in the index, which should be precomposed, that may need to be compared with the names read from readdir(). NFS mounted from Linux is fully transparent and does not suffer from the above. As Mac OS X treats precomposed and decomposed file names as equal, we can - wrap readdir() on Mac OS X to return the precomposed form, and - normalize decomposed form given from the command line also to the precomposed form, to ensure that all pathnames used in Git are always in the precomposed form. This behaviour can be requested by setting "core.precomposedunicode" configuration variable to true. The code in compat/precomposed_utf8.c implements basically 4 new functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(), precomposed_utf8_closedir() and precompose_argv(). The first three are to wrap opendir(3), readdir(3), and closedir(3) functions. The argv[] conversion allows to use the TAB filename completion done by the shell on command line. It tolerates other tools which use readdir() to feed decomposed file names into git. When creating a new git repository with "git init" or "git clone", "core.precomposedunicode" will be set "false". The user needs to activate this feature manually. She typically sets core.precomposedunicode to "true" on HFS and VFAT, or file systems mounted via SAMBA. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-23strbuf: add fixed-length version of add_wrapped_textLibravatar Jeff King1-0/+9
The function strbuf_add_wrapped_text takes a NUL-terminated string. This makes it annoying to wrap strings we have as a pointer and a length. Refactoring strbuf_add_wrapped_text and all of its sub-functions to handle fixed-length strings turned out to be really ugly. So this implementation is lame; it just strdups the text and operates on the NUL-terminated version. This should be fine as the strings we are wrapping are generally pretty short. If it becomes a problem, we can optimize later. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02Merge branch 'rs/optim-text-wrap'Libravatar Junio C Hamano1-33/+28
* rs/optim-text-wrap: utf8.c: speculatively assume utf-8 in strbuf_add_wrapped_text() utf8.c: remove strbuf_write() utf8.c: remove print_spaces() utf8.c: remove print_wrapped_text()
2010-02-20utf8.c: speculatively assume utf-8 in strbuf_add_wrapped_text()Libravatar René Scharfe1-6/+17
is_utf8() works by calling utf8_width() for each character at the supplied location. In strbuf_add_wrapped_text(), we do that anyway while wrapping the lines. So instead of checking the encoding beforehand, optimistically assume that it's utf-8 and wrap along until an invalid character is hit, and when that happens start over. This pays off if the text consists only of valid utf-8 characters. The following command was run against the Linux kernel repo with git 1.7.0: $ time git log --format='%b' v2.6.32 >/dev/null real 0m2.679s user 0m2.580s sys 0m0.100s $ time git log --format='%w(60,4,8)%b' >/dev/null real 0m4.342s user 0m4.230s sys 0m0.110s And with this patch series: $ time git log --format='%w(60,4,8)%b' >/dev/null real 0m3.741s user 0m3.630s sys 0m0.110s So the cost of wrapping is reduced to 70% in this case. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-20utf8.c: remove strbuf_write()Libravatar René Scharfe1-13/+5
The patch before the previous one made sure that all callers of strbuf_add_wrapped_text() supply a strbuf. Replace all calls of strbuf_write() with regular strbuf functions and remove it. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-20utf8.c: remove print_spaces()Libravatar René Scharfe1-9/+6
The previous patch made sure that strbuf_add_wrapped_text() (and thus strbuf_add_indented_text(), too) always get a strbuf. Make use of this fact by adding strbuf_addchars(), a small helper that adds a char the specified number of times to a strbuf, and use it to replace print_spaces(). Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-20utf8.c: remove print_wrapped_text()Libravatar René Scharfe1-5/+0
strbuf_add_wrapped_text() is called only from print_wrapped_text() without a strbuf (in which case it writes its results to stdout). At its only callsite, supply a strbuf, call strbuf_add_wrapped_text() directly and remove the wrapper function. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-12utf8.c: mark file-local function staticLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-23strbuf_add_wrapped_text(): skip over colour codesLibravatar René Scharfe1-1/+21
Ignore display mode escape sequences (colour codes) for the purpose of text wrapping because they don't have a visible width. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>