| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
tests: define GIT_TEST_SIDEBAND_ALL
{fetch,upload}-pack: sideband v2 fetch response
sideband: reverse its dependency on pkt-line
pkt-line: introduce struct packet_writer
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
|
|
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
|
|
Define a GIT_TEST_SIDEBAND_ALL environment variable meant to be used
from tests. When set to true, this overrides uploadpack.allowsidebandall
to true, allowing the entire test suite to be run as if this
configuration is in place for all repositories.
As of this patch, all tests pass whether GIT_TEST_SIDEBAND_ALL is unset
or set to 1.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, a response to a fetch request has sideband support only while
the packfile is being sent, meaning that the server cannot send notices
until the start of the packfile.
Extend sideband support in protocol v2 fetch responses to the whole
response. upload-pack will advertise it if the
uploadpack.allowsidebandall configuration variable is set, and
fetch-pack will automatically request it if advertised.
If the sideband is to be used throughout the whole response, upload-pack
will use it to send errors instead of prefixing a PKT-LINE payload with
"ERR ".
This will be tested in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When communicating with a remote server or a subprocess, use
expanded numbers rather than numbers with scaling suffix in the
object filter spec (e.g. "limit:blob=1k" becomes
"limit:blob=1024").
Update the protocol docs to note that clients should always perform this
expansion, to allow for more compatibility between server
implementations.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A future patch will allow the client to request multiplexing of the
entire fetch response (and not only during packfile transmission), which
in turn allows the server to send progress and keepalive messages at any
time during the response.
It will be convenient for a future patch if writing options
(specifically, whether the written data is to be multiplexed) could be
controlled from a single place, so create struct packet_writer to serve
as that place, and modify upload-pack to use it.
Currently, it only stores the output fd, but a subsequent patch will (as
described above) introduce an option to determine if the written data is
to be multiplexed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 685fbd3291 ("fetch-pack: perform a fetch using v2", 2018-03-15)
attempted to teach Git deepen-relative in protocol v2 (among other
things), but it didn't work:
(1) fetch-pack.c needs to emit "deepen-relative".
(2) upload-pack.c needs to ensure that the correct deepen_relative
variable is passed to deepen() (there are two - the static variable
and the one in struct upload_pack_data).
(3) Before deepen() computes the list of reachable shallows, it first
needs to mark all "our" refs as OUR_REF. v2 currently does not do
this, because unlike v0, it is not needed otherwise.
Fix all this and include a test demonstrating that it works now. For
(2), the static variable deepen_relative is also eliminated, removing a
source of confusion.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By using and sharing a packet_reader while handling a Git pack protocol
request, the same reader option is used throughout the code. This makes
it easy to set a reader option to the request parsing code.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" over protocol v2 into a shallow repository failed to
fetch full history behind a new tip of history that was diverged
before the cut-off point of the history that was previously fetched
shallowly.
* jt/upload-pack-v2-fix-shallow:
upload-pack: clear flags before each v2 request
upload-pack: make want_obj not global
upload-pack: make have_obj not global
|
|
Code clean-up that results in a small bugfix.
* jk/uploadpack-packobjectshook-fix:
upload-pack: fix broken if/else chain in config callback
|
|
More codepaths are moving away from hardcoded hash sizes.
* bc/hash-transition-part-15:
rerere: convert to use the_hash_algo
submodule: make zero-oid comparison hash function agnostic
apply: rename new_sha1_prefix and old_sha1_prefix
apply: replace hard-coded constants
tag: express constant in terms of the_hash_algo
transport: use parse_oid_hex instead of a constant
upload-pack: express constants in terms of the_hash_algo
refs/packed-backend: express constants using the_hash_algo
packfile: express constants in terms of the_hash_algo
pack-revindex: express constants in terms of the_hash_algo
builtin/fetch-pack: remove constants with parse_oid_hex
builtin/mktree: remove hard-coded constant
builtin/repack: replace hard-coded constants
pack-bitmap-write: use GIT_MAX_RAWSZ for allocation
object_id.cocci: match only expressions of type 'struct object_id'
|
|
The upload_pack_config() callback uses an if/else chain
like:
if (!strcmp(var, "a"))
...
else if (!strcmp(var, "b"))
...
etc
This works as long as the conditions are mutually exclusive,
but one of them is not. 20b20a22f8 (upload-pack: provide a
hook for running pack-objects, 2016-05-18) added:
else if (current_config_scope() != CONFIG_SCOPE_REPO) {
... check some more options ...
}
That was fine in that commit, because it came at the end of
the chain. But later, 10ac85c785 (upload-pack: add object
filtering for partial clone, 2017-12-08) did this:
else if (current_config_scope() != CONFIG_SCOPE_REPO) {
... check some more options ...
} else if (!strcmp("uploadpack.allowfilter", var))
...
We'd always check the scope condition first, meaning we'd
_only_ respect allowfilter when it's in the repo config. You
can see this with:
git -c uploadpack.allowfilter=true upload-pack . | head -1
which will not advertise the filter capability (but will
after this patch). We never noticed because:
- our tests always set it in the repo config
- in protocol v2, we use a different code path that
actually calls repo_config_get_bool() separately, so
that _does_ work. Real-world people experimenting with
this may be using v2.
The more recent uploadpack.allowrefinwant option is in the
same boat.
There are a few possible fixes:
1. Bump the scope conditional back to the bottom of the
chain. But that just means somebody else is likely to
make the same mistake later.
2. Make the conditional more like the others. I.e.:
else if (!current_config_scope() != CONFIG_SCOPE_REPO &&
!strcmp(var, "uploadpack.notallowedinrepo"))
This works, but the idea of the original structure was
that we may grow multiple sensitive options like this.
3. Pull it out of the chain entirely. The chain mostly
serves to avoid extra strcmp() calls after we've found
a match. But it's not worth caring about those. In the
worst case, when there isn't a match, we're already
hitting every strcmp (and this happens regularly for
stuff like "core.bare", etc).
This patch does (3).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suppose a server has the following commit graph:
A B
\ /
O
We create a client by cloning A from the server with depth 1, and add
many commits to it (so that future fetches span multiple requests due to
lengthy negotiation). If it then fetches B using protocol v2, the fetch
spanning multiple requests, the resulting packfile does not contain O
even though the client did report that A is shallow.
This is because upload_pack_v2() can be called multiple times while
processing the same session. During the 2nd and all subsequent
invocations, some object flags remain from the previous invocations. In
particular, CLIENT_SHALLOW remains, preventing process_shallow() from
adding client-reported shallows to the "shallows" array, and hence
pack-objects not knowing about these client-reported shallows.
Therefore, teach upload_pack_v2() to clear object flags at the start of
each invocation. This has some other results:
- THEY_HAVE gates addition of objects to have_obj in process_haves().
Previously in upload_pack_v2(), have_obj needed to be static because
once an object is added to have_obj, it is never readded and thus we
needed to retain the contents of have_obj between invocations. Now
that flags are cleared, this is no longer necessary. This patch does
not change the behavior of ok_to_give_up() (THEY_HAVE is still set on
each "have") and got_oid() (used only in non-v2)); THEY_HAVE is not
used in any other function.
- WANTED gates addition of objects to want_obj in parse_want() and
parse_want_ref(). It is also used in receive_needs(), but that is
only used in non-v2. For the same reasons as THEY_HAVE, want_obj no
longer needs to be static in upload_pack_v2().
- CLIENT_SHALLOW is changed as discussed above.
Clearing of the other 5 flags does not affect functionality in v2. (Note
that in non-v2, upload_pack() is only called once per process, so each
invocation starts with blank flags anyway.)
- OUR_REF is only used in non-v2.
- COMMON_KNOWN is only used as a scratch flag in ok_to_give_up().
- SHALLOW is passed to invocations in deepen() and
deepen_by_rev_list(), but upload-pack doesn't use it.
- NOT_SHALLOW is used by send_shallow() and send_unshallow(), but
invocations of those functions are always preceded by code that sets
NOT_SHALLOW on the appropriate objects.
- HIDDEN_REF is only used in non-v2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because upload_pack_v2() can be invoked multiple times in the same
process, the static variable want_obj may not be empty when it is
invoked. To make further analysis of this situation easier, make the
variable local; analysis will be done in a subsequent patch.
The new local variable in upload_pack_v2() is static to preserve
existing behavior; this is not necessary in upload_pack() because
upload_pack() is only invoked once per process.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because upload_pack_v2() can be invoked multiple times in the same
process, the static variable have_obj may not be empty when it is
invoked. To make further analysis of this situation easier, make the
variable local; analysis will be done in a subsequent patch.
The new local variable in upload_pack_v2() is static to preserve
existing behavior; this is not necessary in upload_pack() because
upload_pack() is only invoked once per process.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
|
|
Convert all uses of the GIT_SHA1_HEXSZ to use the_hash_algo so that they
are appropriate for any given hash length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
|
|
Call close_commit_graph() when about to start a rev-list walk that
includes shallow commits. This is necessary in code paths that "fake"
shallow commits for the sake of fetch. Specifically, test 351 in
t5500-fetch-pack.sh runs
git fetch --shallow-exclude one origin
with a file-based transfer. When the "remote" has a commit-graph, we do
not prevent the commit-graph from being loaded, but then the commits are
intended to be dynamically transferred into shallow commits during
get_shallow_commits_by_rev_list(). By closing the commit-graph before
this call, we prevent this interaction.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
lookup_commit_reference() and friends have been updated to find
in-core object for a specific in-core repository instance.
* sb/object-store-lookup: (32 commits)
commit.c: allow lookup_commit_reference to handle arbitrary repositories
commit.c: allow lookup_commit_reference_gently to handle arbitrary repositories
tag.c: allow deref_tag to handle arbitrary repositories
object.c: allow parse_object to handle arbitrary repositories
object.c: allow parse_object_buffer to handle arbitrary repositories
commit.c: allow get_cached_commit_buffer to handle arbitrary repositories
commit.c: allow set_commit_buffer to handle arbitrary repositories
commit.c: migrate the commit buffer to the parsed object store
commit-slabs: remove realloc counter outside of slab struct
commit.c: allow parse_commit_buffer to handle arbitrary repositories
tag: allow parse_tag_buffer to handle arbitrary repositories
tag: allow lookup_tag to handle arbitrary repositories
commit: allow lookup_commit to handle arbitrary repositories
tree: allow lookup_tree to handle arbitrary repositories
blob: allow lookup_blob to handle arbitrary repositories
object: allow lookup_object to handle arbitrary repositories
object: allow object_as_type to handle arbitrary repositories
tag: add repository argument to deref_tag
tag: add repository argument to parse_tag_buffer
tag: add repository argument to lookup_tag
...
|
|
"git fetch" failed to correctly validate the set of objects it
received when making a shallow history deeper, which has been
corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: write shallow, then check connectivity
fetch-pack: implement ref-in-want
fetch-pack: put shallow info in output parameter
fetch: refactor to make function args narrower
fetch: refactor fetch_refs into two functions
fetch: refactor the population of peer ref OIDs
upload-pack: test negotiation with changing repository
upload-pack: implement ref-in-want
test-pkt-line: add unpack-sideband subcommand
|
|
The can_all_from_reach_with_flags() algorithm is currently quadratic in
the worst case, because it calls the reachable() method for every 'from'
without tracking which commits have already been walked or which can
already reach a commit in 'to'.
Rewrite the algorithm to walk each commit a constant number of times.
We also add some optimizations that should work for the main consumer of
this method: fetch negotitation (haves/wants).
The first step includes using a depth-first-search (DFS) from each
'from' commit, sorted by ascending generation number. We do not walk
beyond the minimum generation number or the minimum commit date. This
DFS is likely to be faster than the existing reachable() method because
we expect previous ref values to be along the first-parent history.
If we find a target commit, then we mark everything in the DFS stack as
a RESULT. This expands the set of targets for the other 'from' commits.
We also mark the visited commits using 'assign_flag' to prevent re-
walking the same commits.
We still need to clear our flags at the end, which is why we will have a
total of three visits to each commit.
Performance was measured on the Linux repository using
'test-tool reach can_all_from_reach'. The input included rows seeded by
tag values. The "small" case included X-rows as v4.[0-9]* and Y-rows as
v3.[0-9]*. This mimics a (very large) fetch that says "I have all major
v3 releases and want all major v4 releases." The "large" case included
X-rows as "v4.*" and Y-rows as "v3.*". This adds all release-candidate
tags to the set, which does not greatly increase the number of objects
that are considered, but does increase the number of 'from' commits,
demonstrating the quadratic nature of the previous code.
Small Case:
Before: 1.52 s
After: 0.26 s
Large Case:
Before: 3.50 s
After: 0.27 s
Note how the time increases between the two cases in the two versions.
The new code increases relative to the number of commits that need to be
walked, but not directly relative to the number of 'from' commits.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several commit walks in the codebase. Group them together into
a new commit-reach.c file and corresponding header. After we group these
walks into one place, we can reduce duplicate logic by calling
equivalent methods.
The can_all_from_reach_with_flags method is used in a stateful way by
upload-pack.c. The parameters are very flexible, so we will be able to
use its commit walking logic for many other callers.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ok_to_give_up() method uses the commit date as a cutoff to avoid
walking the entire reachble set of commits. Before moving the
reachable() method to commit-reach.c, pull out the dependence on the
global constant 'oldest_have' with a 'min_commit_date' parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In anticipation of consolidating all commit reachability algorithms,
refactor ok_to_give_up() in order to allow splitting its logic into
an external method.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In anticipation of moving the reachable() method to commit-reach.c,
modify the prototype to be more generic to flags known outside of
upload-pack.c. Also rename 'want' to 'from' to make the statement
more clear outside of the context of haves/wants negotiation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Add a repository argument to allow the callers of deref_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Currently, while performing packfile negotiation, clients are only
allowed to specify their desired objects using object ids. This causes
a vulnerability to failure when an object turns non-existent during
negotiation, which may happen if, for example, the desired repository is
provided by multiple Git servers in a load-balancing arrangement and
there exists replication delay.
In order to eliminate this vulnerability, implement the ref-in-want
feature for the 'fetch' command in protocol version 2. This feature
enables the 'fetch' command to support requests in the form of ref names
through a new "want-ref <ref>" parameter. At the conclusion of
negotiation, the server will send a list of all of the wanted references
(as provided by "want-ref" lines) in addition to the generated packfile.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Transfer protocol v2 learned to support the partial clone.
* jt/partial-clone-proto-v2:
{fetch,upload}-pack: support filter in protocol v2
upload-pack: read config when serving protocol v2
upload-pack: fix error message typo
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
|
|
Add a repository argument to allow callers of is_repository_shallow
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of register_shallow
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
The fetch-pack/upload-pack protocol v2 was developed independently of
the filter parameter (used in partial fetches), thus it did not include
support for it. Add support for the filter parameter.
Like in the legacy protocol, the server advertises and supports "filter"
only if uploadpack.allowfilter is configured.
Like in the legacy protocol, the client continues with a warning if
"--filter" is specified, but the server does not advertise it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The upload-pack code paths never call git_config() with
upload_pack_config() when protocol v2 is used, causing options like
uploadpack.packobjectshook to not take effect. Ensure that this function
is called.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a typo in an error message.
Also, this line was introduced in 3145ea957d2c ("upload-pack: introduce
fetch server command", 2018-03-15), which did not contain a test for the
case which causes this error to be printed, so introduce a test.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
Update several uses of hard-coded 40-based constants to use either
the_hash_algo or GIT_MAX_HEXSZ, as appropriate. Replace a combined use
of oid_to_hex and memcpy with oid_to_hex_r, which not only avoids the
need for a constant, but is more efficient. Make use of parse_oid_hex
to eliminate the need for constants and simplify the code at the same
time. Update some comments to no longer refer to SHA-1 as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
|
|
Hotfix.
* jh/partial-clone:
upload-pack: disable object filtering when disabled by config
unpack-trees: release oid_array after use in check_updates()
|
|
When upload-pack gained partial clone support (v2.17.0-rc0~132^2~12,
2017-12-08), it was guarded by the uploadpack.allowFilter config item
to allow server operators to control when they start supporting it.
That config item didn't go far enough, though: it controls whether the
'filter' capability is advertised, but if a (custom) client ignores
the capability advertisement and passes a filter specification anyway,
the server would handle that despite allowFilter being false.
This is particularly significant if a security bug is discovered in
this new experimental partial clone code. Installations without
uploadpack.allowFilter ought not to be affected since they don't
intend to support partial clone, but they would be swept up into being
vulnerable.
Simplify and limit the attack surface by making uploadpack.allowFilter
disable the feature, not just the advertisement of it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When communicating with a v2 server, perform a fetch by requesting the
'fetch' command.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the 'fetch' server command.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Nguyễn Thái Ngọc Duy
Junio C Hamano
Jonathan Tan
Josh Steadmon
Masaya Suzuki
Jeff King
brian m. carlson
Derrick Stolee
Stefan Beller
Brandon Williams
Jonathan Nieder