summaryrefslogtreecommitdiff
path: root/unpack-trees.c
AgeCommit message (Collapse)AuthorFilesLines
2015-09-25replace trivial malloc + sprintf / strcpy calls with xstrfmtLibravatar Jeff King1-3/+1
It's a common pattern to do: foo = xmalloc(strlen(one) + strlen(two) + 1 + 1); sprintf(foo, "%s %s", one, two); (or possibly some variant with strcpy()s or a more complicated length computation). We can switch these to use xstrfmt, which is shorter, involves less error-prone manual computation, and removes many sprintf and strcpy calls which make it harder to audit the code for real buffer overflows. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-09Sync with 2.5.2Libravatar Junio C Hamano1-7/+10
2015-09-04Sync with 2.4.9Libravatar Junio C Hamano1-7/+10
2015-09-04Sync with 2.2.3Libravatar Junio C Hamano1-7/+10
2015-09-04verify_absent: allow filenames longer than PATH_MAXLibravatar Jeff King1-7/+10
When unpack-trees wants to know whether a path will overwrite anything in the working tree, we use lstat() to see if there is anything there. But if we are going to write "foo/bar", we can't just lstat("foo/bar"); we need to look for leading prefixes (e.g., "foo"). So we use the lstat cache to find the length of the leading prefix, and copy the filename up to that length into a temporary buffer (since the original name is const, we cannot just stick a NUL in it). The copy we make goes into a PATH_MAX-sized buffer, which will overflow if the prefix is longer than PATH_MAX. How this happens is a little tricky, since in theory PATH_MAX is the biggest path we will have read from the filesystem. But this can happen if: - the compiled-in PATH_MAX does not accurately reflect what the filesystem is capable of - the leading prefix is not _quite_ what is on disk; it contains the next element from the name we are checking. So if we want to write "aaa/bbb/ccc/ddd" and "aaa/bbb" exists, the prefix of interest is "aaa/bbb/ccc". If "aaa/bbb" approaches PATH_MAX, then "ccc" can overflow it. So this can be triggered, but it's hard to do. In particular, you cannot just "git clone" a bogus repo. The verify_absent checks happen before unpack-trees writes anything to the filesystem, so there are never any leading prefixes during the initial checkout, and the bug doesn't trigger. And by definition, these files are larger than PATH_MAX, so writing them will fail, and clone will complain (though it may write a partial path, which will cause a subsequent "git checkout" to hit the bug). We can fix it by creating the temporary path on the heap. The extra malloc overhead is not important, as we are already making at least one stat() call (and probably more for the prefix discovery). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-19Merge branch 'jk/git-path'Libravatar Junio C Hamano1-1/+3
git_path() and mkpath() are handy helper functions but it is easy to misuse, as the callers need to be careful to keep the number of active results below 4. Their uses have been reduced. * jk/git-path: memoize common git-path "constant" files get_repo_path: refactor path-allocation find_hook: keep our own static buffer refs.c: remove_empty_directories can take a strbuf refs.c: avoid git_path assignment in lock_ref_sha1_basic refs.c: avoid repeated git_path calls in rename_tmp_log refs.c: simplify strbufs in reflog setup and writing path.c: drop git_path_submodule refs.c: remove extra git_path calls from read_loose_refs remote.c: drop extraneous local variable from migrate_file prefer mkpathdup to mkpath in assignments prefer git_pathdup to git_path in some possibly-dangerous cases add_to_alternates_file: don't add duplicate entries t5700: modernize style cache.h: complete set of git_path_submodule helpers cache.h: clarify documentation for git_path, et al
2015-08-19Merge branch 'as/sparse-checkout-removal' into maintLibravatar Junio C Hamano1-0/+4
"sparse checkout" misbehaved for a path that is excluded from the checkout when switching between branches that differ at the path. * as/sparse-checkout-removal: unpack-trees: don't update files with CE_WT_REMOVE set
2015-08-12Merge branch 'dt/unpack-trees-cache-tree-revalidate'Libravatar Junio C Hamano1-0/+8
The code to perform multi-tree merges has been taught to repopulate the cache-tree upon a successful merge into the index, so that subsequent "diff-index --cached" (hence "status") and "write-tree" (hence "commit") will go faster. The same logic in "git checkout" may now be removed, but that is a separate issue. * dt/unpack-trees-cache-tree-revalidate: unpack-trees: populate cache-tree on successful merge
2015-08-10prefer git_pathdup to git_path in some possibly-dangerous casesLibravatar Jeff King1-1/+3
Because git_path uses a static buffer that is shared with calls to git_path, mkpath, etc, it can be dangerous to assign the result to a variable or pass it to a non-trivial function. The value may change unexpectedly due to other calls. None of the cases changed here has a known bug, but they're worth converting away from git_path because: 1. It's easy to use git_pathdup in these cases. 2. They use constructs (like assignment) that make it hard to tell whether they're safe or not. The extra malloc overhead should be trivial, as an allocation should be an order of magnitude cheaper than a system call (which we are clearly about to make, since we are constructing a filename). The real cost is that we must remember to free the result. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-03Merge branch 'as/sparse-checkout-removal'Libravatar Junio C Hamano1-0/+4
"sparse checkout" misbehaved for a path that is excluded from the checkout when switching between branches that differ at the path. * as/sparse-checkout-removal: unpack-trees: don't update files with CE_WT_REMOVE set
2015-07-28unpack-trees: populate cache-tree on successful mergeLibravatar Brian Degenhardt1-0/+8
When we unpack trees into an existing index, we discard the old index and replace it with the new, merged index. Ensure that this index has its cache-tree populated. This will make subsequent git status and commit commands faster. Signed-off-by: Brian Degenhardt <bmd@bmdhacks.com> Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-21unpack-trees: don't update files with CE_WT_REMOVE setLibravatar David Turner1-0/+4
Don't update files in the worktree from cache entries which are flagged with CE_WT_REMOVE. When a user does a sparse checkout, git removes files that are marked with CE_WT_REMOVE (because they are out-of-scope for the sparse checkout). If those files are also marked CE_UPDATE (for instance, because they differ in the branch that is being checked out and the outgoing branch), git would previously recreate them. This patch prevents them from being recreated. These erroneously-created files would also interfere with merges, causing pre-merge revisions of out-of-scope files to appear in the worktree. apply_sparse_checkout() is the function where all "action" manipulation (add, delete, update files..) for sparse checkout occurs; it should not ask to delete and update both at the same time. Signed-off-by: Anatole Shaw <git-devel@omni.poc.net> Signed-off-by: David Turner <dturner@twopensource.com> Helped-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-12untracked cache: invalidate at index addition or removalLibravatar Nguyễn Thái Ngọc Duy1-2/+5
Ideally we should implement untracked_cache_remove_from_index() and untracked_cache_add_to_index() so that they update untracked cache right away instead of invalidating it and wait for read_directory() next time to deal with it. But that may need some more work in unpack-trees.c. So stay simple as the first step. The new call in add_index_entry_with_check() may look strange because new calls usually stay close to cache_tree_invalidate_path(). We do it a bit later than c_t_i_p() in this function because if it's about replacing the entry with the same name, we don't care (but cache-tree does). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-18Sync with v2.2.1Libravatar Junio C Hamano1-4/+6
* maint: Git 2.2.1 Git 2.1.4 Git 2.0.5 Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17Sync with v2.0.5Libravatar Junio C Hamano1-4/+6
* maint-2.0: Git 2.0.5 Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17Sync with v1.9.5Libravatar Junio C Hamano1-4/+6
* maint-1.9: Git 1.9.5 Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17Sync with v1.8.5.6Libravatar Junio C Hamano1-4/+6
* maint-1.8.5: Git 1.8.5.6 fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17Merge branch 'dotgit-case-maint-1.8.5' into maint-1.8.5Libravatar Junio C Hamano1-4/+6
* dotgit-case-maint-1.8.5: fsck: complain about NTFS ".git" aliases in trees read-cache: optionally disallow NTFS .git variants path: add is_ntfs_dotgit() helper fsck: complain about HFS+ ".git" aliases in trees read-cache: optionally disallow HFS+ .git variants utf8: add is_hfs_dotgit() helper fsck: notice .git case-insensitively t1450: refactor ".", "..", and ".git" fsck tests verify_dotfile(): reject .git case-insensitively read-tree: add tests for confusing paths like ".." and ".git" unpack-trees: propagate errors adding entries to the index
2014-12-17unpack-trees: propagate errors adding entries to the indexLibravatar Jeff King1-4/+6
When unpack_trees tries to write an entry to the index, add_index_entry may report an error to stderr, but we ignore its return value. This leads to us returning a successful exit code for an operation that partially failed. Let's make sure to propagate this code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-12Merge branch 'jc/unpack-trees-plug-leak'Libravatar Junio C Hamano1-0/+2
* jc/unpack-trees-plug-leak: unpack_trees: plug leakage of o->result
2014-11-17unpack_trees: plug leakage of o->resultLibravatar Junio C Hamano1-0/+2
Most of the time the caller specifies to which destination variable the resulting index_state should be assigned by passing a non-NULL pointer in o->dst_index to receive that state, but for a caller that gives a NULL o->dst_index, the resulting index simply leaked. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-19Merge branch 'jn/unpack-trees-checkout-m-carry-deletion' into maintLibravatar Junio C Hamano1-21/+10
* jn/unpack-trees-checkout-m-carry-deletion: checkout -m: attempt merge when deletion of path was staged unpack-trees: use 'cuddled' style for if-else cascade unpack-trees: simplify 'all other failures' case
2014-09-11Merge branch 'jn/unpack-trees-checkout-m-carry-deletion'Libravatar Junio C Hamano1-21/+10
"git checkout -m" did not switch to another branch while carrying the local changes forward when a path was deleted from the index. * jn/unpack-trees-checkout-m-carry-deletion: checkout -m: attempt merge when deletion of path was staged unpack-trees: use 'cuddled' style for if-else cascade unpack-trees: simplify 'all other failures' case
2014-08-25checkout -m: attempt merge when deletion of path was stagedLibravatar Jonathan Nieder1-5/+6
twoway_merge() is missing an o->gently check in the case where a file that needs to be modified is missing from the index but present in the old and new trees. As a result, in this case 'git checkout -m' errors out instead of trying to perform a merge. Fix it by checking o->gently. While at it, inline the o->gently check into reject_merge to prevent future call sites from making the same mistake. Noticed by code inspection. The test for the motivating case was added by JC. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-13unpack-trees: use 'cuddled' style for if-else cascadeLibravatar Jonathan Nieder1-8/+4
Match the predominant style in git by following K&R style for if/else cascades. Documentation/CodingStyle from linux.git explains: Note that the closing brace is empty on a line of its own, _except_ in the cases where it is followed by a continuation of the same statement, ie a "while" in a do-statement or an "else" in an if-statement, like this: if (x == y) { .. } else if (x > y) { ... } else { .... } Rationale: K&R. Also, note that this brace-placement also minimizes the number of empty (or almost empty) lines, without any loss of readability. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-13unpack-trees: simplify 'all other failures' caseLibravatar Stefan Beller1-10/+2
In the 'if (current)' block of twoway_merge, we handle the boring errors by checking if the entry from the old tree, current index, and new tree are present, to get a pathname for the error message from one of them: if (oldtree) return o->gently ? -1 : reject_merge(oldtree, o); if (current) return o->gently ? -1 : reject_merge(current, o); if (newtree) return o->gently ? -1 : reject_merge(newtree, o); return -1; Since this is guarded by 'if (current)', the second test is guaranteed to succeed. Moreover, any of the three entries, if present, would have the same path because there is no rename detection in this code path. Even if some day in the future the entries' paths differ, the 'current' path used in the index and worktree would presumably be the most recognizable for the end user. Simplify by just using 'current'. Noticed by coverity, Id:290002 Signed-off-by: Stefan Beller <stefanbeller@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-16Merge branch 'nd/split-index'Libravatar Junio C Hamano1-3/+15
An experiment to use two files (the base file and incremental changes relative to it) to represent the index to reduce I/O cost of rewriting a large index when only small part of the working tree changes. * nd/split-index: (32 commits) t1700: new tests for split-index mode t2104: make sure split index mode is off for the version test read-cache: force split index mode with GIT_TEST_SPLIT_INDEX read-tree: note about dropping split-index mode or index version read-tree: force split-index mode off on --index-output rev-parse: add --shared-index-path to get shared index path update-index --split-index: do not split if $GIT_DIR is read only update-index: new options to enable/disable split index mode split-index: strip pathname of on-disk replaced entries split-index: do not invalidate cache-tree at read time split-index: the reading part split-index: the writing part read-cache: mark updated entries for split index read-cache: save deleted entries in split index read-cache: mark new entries for split index read-cache: split-index mode read-cache: save index SHA-1 after reading entry.c: update cache_changed if refresh_cache is set in checkout_entry() cache-tree: mark istate->cache_changed on prime_cache_tree() cache-tree: mark istate->cache_changed on cache tree update ...
2014-07-09Merge branch 'jk/xstrfmt'Libravatar Junio C Hamano1-11/+6
* jk/xstrfmt: setup_git_env(): introduce git_path_from_env() helper unique_path: fix unlikely heap overflow walker_fetch: fix minor memory leak merge: use argv_array when spawning merge strategy sequencer: use argv_array_pushf setup_git_env: use git_pathdup instead of xmalloc + sprintf use xstrfmt to replace xmalloc + strcpy/strcat use xstrfmt to replace xmalloc + sprintf use xstrdup instead of xmalloc + strcpy use xstrfmt in favor of manual size calculations strbuf: add xstrfmt helper
2014-06-20cleanup duplicate name_compare() functionsLibravatar Jeremiah Mahler1-11/+0
We often represent our strings as a counted string, i.e. a pair of the pointer to the beginning of the string and its length, and the string may not be NUL terminated to that length. To compare a pair of such counted strings, unpack-trees.c and read-cache.c implement their own name_compare() functions identically. In addition, the cache_name_compare() function in read-cache.c is nearly identical. The only difference is when one string is the prefix of the other string, in which case name_compare() returns -1/+1 to show which one is longer, and cache_name_compare() returns the difference of the lengths to show the same information. Unify these three functions by using the implementation from cache_name_compare(). This does not make any difference to the existing and future callers, as they must be paying attention only to the sign of the returned value (and not the magnitude) because the original implementations of these two functions return values returned by memcmp(3) when the one string is not a prefix of the other string, and the only thing memcmp(3) guarantees its callers is the sign of the returned value, not the magnitude. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-19use xstrfmt in favor of manual size calculationsLibravatar Jeff King1-11/+6
In many parts of the code, we do an ugly and error-prone malloc like: const char *fmt = "something %s"; buf = xmalloc(strlen(foo) + 10 + 1); sprintf(buf, fmt, foo); This makes the code brittle, and if we ever get the allocation wrong, is a potential heap overflow. Let's instead favor xstrfmt, which handles the allocation automatically, and makes the code shorter and more readable. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13read-cache: mark updated entries for split indexLibravatar Nguyễn Thái Ngọc Duy1-1/+3
The large part of this patch just follows CE_ENTRY_CHANGED marks. replace_index_entry() is updated to update split_index->base->cache[] as well so base->cache[] does not reference to a freed entry. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13read-cache: split-index modeLibravatar Nguyễn Thái Ngọc Duy1-0/+4
This split-index mode is designed to keep write cost proportional to the number of changes the user has made, not the size of the work tree. (Read cost is another matter, to be dealt separately.) This mode stores index info in a pair of $GIT_DIR/index and $GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over time while "index" is smaller and updated often. Format details are in index-format.txt, although not everything is implemented in this patch. Shared indexes are not automatically removed, because it's unclear if the shared index is needed by any (even temporary) indexes by just looking at it. After a while you'll collect stale shared indexes. The good news is one shared index is useable for long, until $GIT_DIR/index becomes too big and sluggish that the new shared index must be created. The safest way to clean shared indexes is to turn off split index mode, so shared files are all garbage, delete them all, then turn on split index mode again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13read-cache: save index SHA-1 after readingLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Also update SHA-1 after writing. If we do not do that, the second read_index() will see "initialized" variable already set and not read .git/index again, which is fine, except istate->sha1 now has a stale value. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13entry.c: update cache_changed if refresh_cache is set in checkout_entry()Libravatar Nguyễn Thái Ngọc Duy1-0/+1
Other fill_stat_cache_info() is on new entries, which should set CE_ENTRY_ADDED in cache_changed, so we're safe. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13cache-tree: mark istate->cache_changed on cache tree invalidationLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13unpack-trees: be specific what part of the index has changedLibravatar Nguyễn Thái Ngọc Duy1-2/+6
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-14Merge branch 'nd/i18n-progress'Libravatar Junio C Hamano1-1/+1
Mark the progress indicators from various time-consuming commands for i18n/l10n. * nd/i18n-progress: i18n: mark all progress lines for translation
2014-02-27Merge branch 'kb/fast-hashmap'Libravatar Junio C Hamano1-2/+1
Improvements to our hash table to get it to meet the needs of the msysgit fscache project, with some nice performance improvements. * kb/fast-hashmap: name-hash: retire unused index_name_exists() hashmap.h: use 'unsigned int' for hash-codes everywhere test-hashmap.c: drop unnecessary #includes .gitignore: test-hashmap is a generated file read-cache.c: fix memory leaks caused by removed cache entries builtin/update-index.c: cleanup update_one fix 'git update-index --verbose --again' output remove old hash.[ch] implementation name-hash.c: remove cache entries instead of marking them CE_UNHASHED name-hash.c: use new hash map implementation for cache entries name-hash.c: remove unreferenced directory entries name-hash.c: use new hash map implementation for directories diffcore-rename.c: use new hash map implementation diffcore-rename.c: simplify finding exact renames diffcore-rename.c: move code around to prepare for the next patch buitin/describe.c: use new hash map implementation add a hashtable implementation that supports O(1) removal submodule: don't access the .gitmodules cache entry after removing it
2014-02-24i18n: mark all progress lines for translationLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-17Merge branch 'jk/two-way-merge-corner-case-fix' into maintLibravatar Junio C Hamano1-8/+17
"git am --abort" sometimes complained about not being able to write a tree with an 0{40} object in it. * jk/two-way-merge-corner-case-fix: t1005: add test for "read-tree --reset -u A B" t1005: reindent unpack-trees: fix "read-tree -u --reset A B" with conflicted index
2013-12-16Prevent buffer overflows when path is too longLibravatar Antoine Pelisse1-24/+27
Some buffers created with PATH_MAX length are not checked when being written, and can overflow if PATH_MAX is not big enough to hold the path. Replace those buffers by strbufs so that their size is automatically grown if necessary. They are created as static local variables to avoid reallocating memory on each call. Note that prefix_filename() returns this static buffer so each callers should copy or use the string immediately (this is currently true). Reported-by: Wataru Noguchi <wnoguchi.0727@gmail.com> Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05Merge branch 'jk/two-way-merge-corner-case-fix'Libravatar Junio C Hamano1-8/+17
Fix a rather longstanding corner-case bug in twoway "reset to there" merge, which is most often seen in "git am --abort". * jk/two-way-merge-corner-case-fix: t1005: add test for "read-tree --reset -u A B" t1005: reindent unpack-trees: fix "read-tree -u --reset A B" with conflicted index
2013-11-18name-hash.c: remove cache entries instead of marking them CE_UNHASHEDLibravatar Karsten Blees1-1/+1
The new hashmap implementation supports remove, so really remove unused cache entries from the name hashmap instead of just marking them. The CE_UNHASHED flag and CE_STATE_MASK are no longer needed. Keep the CE_HASHED flag to prevent adding entries twice. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-18name-hash.c: use new hash map implementation for cache entriesLibravatar Karsten Blees1-1/+0
Note: the "ce->next = NULL;" in unpack-trees.c::do_add_entry can safely be removed, as ce->next (now ce->ent.next) is always properly initialized in name-hash.c::hash_index_entry. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-04unpack-trees: fix "read-tree -u --reset A B" with conflicted indexLibravatar Jeff King1-8/+17
When we call "read-tree --reset -u HEAD ORIG_HEAD", the first thing we do with the index is to call read_cache_unmerged. Originally that would read the index, leaving aside any unmerged entries. However, as of d1a43f2 (reset --hard/read-tree --reset -u: remove unmerged new paths, 2008-10-15), it actually creates a new cache entry to serve as a placeholder, so that we later know to update the working tree. However, we later noticed that the sha1 of that unmerged entry was just copied from some higher stage, leaving you with random content in the index. That was fixed by e11d7b5 ("reset --merge": fix unmerged case, 2009-12-31), which instead puts the null sha1 into the newly created entry, and sets a CE_CONFLICTED flag. At the same time, it teaches the unpack-trees machinery to pay attention to this flag, so that oneway_merge throws away the current value. However, it did not update the code paths for twoway_merge, which is where we end up in the two-way read-tree with --reset. We notice that the HEAD and ORIG_HEAD versions are the same, and say "oh, we can just reuse the current version". But that's not true. The current version is bogus. Notice this case and make sure we do not keep the bogus entry; either we do not have that path in the tree we are moving to (i.e. remove it), or we want to have the cache entry we created for the tree we are moving to (i.e. resolve by explicitly saying the "newtree" version is what we want). [jc: this is from the almost year-old $gmane/212316] Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-17employ new explicit "exists in index?" APILibravatar Eric Sunshine1-2/+2
Each caller of index_name_exists() knows whether it is looking for a directory or a file, and can avoid the unnecessary indirection of index_name_exists() by instead calling index_dir_exists() or index_file_exists() directly. Invoking the appropriate search function explicitly will allow a subsequent patch to relieve callers of the artificial burden of having to add a trailing '/' to the pathname given to index_dir_exists(). Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-13unpack-trees: plug a memory leakLibravatar Felipe Contreras1-1/+3
Before overwriting the destination index, first let's discard its contents. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Tested-by: Лежанкин Иван <abyss.7@gmail.com> wrote: Reviewed-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09Convert "struct cache_entry *" to "const ..." wherever possibleLibravatar Nguyễn Thái Ngọc Duy1-7/+7
I attempted to make index_state->cache[] a "const struct cache_entry **" to find out how existing entries in index are modified and where. The question I have is what do we do if we really need to keep track of on-disk changes in the index. The result is - diff-lib.c: setting CE_UPTODATE - name-hash.c: setting CE_HASHED - preload-index.c, read-cache.c, unpack-trees.c and builtin/update-index: obvious - entry.c: write_entry() may refresh the checked out entry via fill_stat_cache_info(). This causes "non-const struct cache_entry *" in builtin/apply.c, builtin/checkout-index.c and builtin/checkout.c - builtin/ls-files.c: --with-tree changes stagemask and may set CE_UPDATE Of these, write_entry() and its call sites are probably most interesting because it modifies on-disk info. But this is stat info and can be retrieved via refresh, at least for porcelain commands. Other just uses ce_flags for local purposes. So, keeping track of "dirty" entries is just a matter of setting a flag in index modification functions exposed by read-cache.c. Except unpack-trees, the rest of the code base does not do anything funny behind read-cache's back. The actual patch is less valueable than the summary above. But if anyone wants to re-identify the above sites. Applying this patch, then this: diff --git a/cache.h b/cache.h index 430d021..1692891 100644 --- a/cache.h +++ b/cache.h @@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode) #define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1) struct index_state { - struct cache_entry **cache; + const struct cache_entry **cache; unsigned int version; unsigned int cache_nr, cache_alloc, cache_changed; struct string_list *resolve_undo; will help quickly identify them without bogus warnings. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-24Merge branch 'rs/unpack-trees-tree-walk-conflict-field'Libravatar Junio C Hamano1-15/+3
Code clean-up. * rs/unpack-trees-tree-walk-conflict-field: unpack-trees: don't shift conflicts left and right
2013-06-17unpack-trees: don't shift conflicts left and rightLibravatar René Scharfe1-15/+3
If o->merge is set, the struct traverse_info member conflicts is shifted left in unpack_callback, then passed through traverse_trees_recursive to unpack_nondirectories, where it is shifted right before use. Stop the shifting and just pass the conflict bit mask as is. Rename the member to df_conflicts to prove that it isn't used anywhere else. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>