| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code clean up to migrate callers from older advice_config[] based
API to newer advice_if_enabled() and advice_enabled() API.
* ab/retire-advice-config:
advice: move advice.graftFileDeprecated squashing to commit.[ch]
advice: remove use of global advice_add_embedded_repo
advice: remove read uses of most global `advice_` variables
advice: add enum variants for missing advice variables
|
|
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" and "git commit" learn to work without unnecessarily
expanding sparse indexes.
* ds/commit-and-checkout-with-sparse-index:
unpack-trees: resolve sparse-directory/file conflicts
t1092: document bad 'git checkout' behavior
checkout: stop expanding sparse indexes
sparse-index: recompute cache-tree
commit: integrate with sparse-index
p2000: compress repo names
p2000: add 'git checkout -' test and decrease depth
|
|
"git read-tree" had a codepath where blobs are fetched one-by-one
from the promisor remote, which has been corrected to fetch in bulk.
* jt/bulk-prefetch:
cache-tree: prefetch in partial clone read-tree
unpack-trees: refactor prefetching code
|
|
Refactor the prefetching code in unpack-trees.c into its own function,
because it will be used elsewhere in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running unpack_trees() with a sparse index, we attempt to operate
on the index without expanding the sparse directory entries. Thus, we
operate by manipulating entire directories and passing them to the
unpack function. In the case of the 'git checkout' command, this is the
twoway_merge() function.
There are several cases in twoway_merge() that handle different
situations. One new one to add is the case of a directory/file conflict
where the directory is sparse. Before the sparse index, such a conflict
would appear as a list of file additions and deletions. Now,
twoway_merge() initializes 'current', 'oldtree', and 'newtree' from
src[0], src[1], and src[2], then sets 'oldtree' to NULL because it is
equal to the df_conflict_entry. The way to determine that we have a
directory/file conflict is to test that 'current' and 'newtree' disagree
on being sparse directory entries.
When we are in this case, we want to resolve the situation by calling
merged_entry(). This allows replacing the 'current' entry with the
'newtree' entry. This is important for cases where we want to run 'git
checkout' across the conflict and have the new HEAD represent the new
file type at that path. The first NEEDSWORK comment dropped in t1092
demonstrates this necessary behavior.
However, we still are in a confusing state when 'current' corresponds to
a staged change within a sparse directory that is not present at HEAD.
This should be atypical, because it requires adding a change outside of
the sparse-checkout cone, but it is possible. Since we are unable to
determine that this is a staged change within twoway_merge(), we cannot
add a case to reject the merge at this point. I believe this is due to
the use of df_conflict_entry in the place of 'oldtree' instead of using
the valud at HEAD, which would provide some perspective to this
decision. Any change that would allow this differentiation for staged
entries would need to involve information further up in unpack_trees().
That work should be done, sometime, because we are further confusing the
behavior of a directory/file conflict when staging a change in the
directory. The two cases 'checkout behaves oddly with df-conflict-?' in
t1092 demonstrate that even without a sparse-checkout, Git is not
consistent in its behavior. Neither of the two options seems correct,
either. This change makes the sparse-index behave differently than the
typcial sparse-checkout case, but it does match the full checkout
behavior in the df-conflict-2 case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During unpack_callback(), index entries are compared against tree
entries. These are matched according to names and types. One goal is to
decide if we should recurse into subtrees or simply operate on one index
entry.
In the case of a sparse-directory entry, we do not want to recurse into
that subtree and instead simply compare the trees. In some cases, we
might want to perform a merge operation on the entry, such as during
'git checkout <commit>' which wants to replace a sparse tree entry with
the tree for that path at the target commit. We extend the logic within
unpack_single_entry() to create a sparse-directory entry in this case,
and then that is sent to call_unpack_fn().
There are some subtleties in this process. For instance, we need to
update find_cache_entry() to allow finding a sparse-directory entry that
exactly matches a given path. Use the new helper method
sparse_dir_matches_path() for this. We also need to ignore conflict
markers in the case that the entries correspond to directories and we
already have a sparse directory entry.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next change, we will use this method to unpack a sparse directory
entry, so change the name to unpack_single_entry() so these entries
apply. The new name reflects that we will not recurse into trees in
order to resolve the conflicts.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we further integrate the sparse-index into unpack-trees, we need to
ensure that we compare sparse directory entries correctly with other
entries. This affects searching for an exact path as well as sorting
index entries.
Sparse directory entries contain the trailing directory separator. This
is important for the sorting, in particular. Thus, within
do_compare_entry() we stop using S_IFREG in all cases, since sparse
directories should use S_IFDIR to indicate that the comparison should
treat the entry name as a dirctory.
Within compare_entry(), it first calls do_compare_entry() to check the
leading portion of the name. When the input path is a directory name, we
could match exactly already. Thus, we should return 0 if we have an
exact string match on a sparse directory entry. The final check is a
length comparison between the strings.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cache_bottom member of 'struct unpack_trees_options' is used to
track the range of index entries corresponding to a node of the cache
tree. While recursing with traverse_by_cache_tree(), this value is
preserved on the call stack using a local and then restored as that
method returns.
The mark_ce_used() method normally modifies the cache_bottom member when
it refers to the marked cache entry. However, sparse directory entries
are stored as nodes in the cache-tree data structure as of 2de37c53
(cache-tree: integrate with sparse directory entries, 2021-03-30). Thus,
the cache_bottom will be modified as the cache-tree walk advances. Do
not update it as well within mark_ce_used().
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
|
|
Allow make_transient_cache_entry() to optionally receive a mem_pool
struct in which it should allocate the entry. This will be used in the
following patch, to store some transient entries which should persist
until parallel checkout finishes.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The checkout machinery has been taught to perform the actual
write-out of the files in parallel when able.
* mt/parallel-checkout-part-2:
parallel-checkout: add design documentation
parallel-checkout: support progress displaying
parallel-checkout: add configuration options
parallel-checkout: make it truly parallel
unpack-trees: add basic support for parallel checkout
|
|
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
|
|
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make parallel checkout configurable by introducing two new settings:
checkout.workers and checkout.thresholdForParallelism. The first defines
the number of workers (where one means sequential checkout), and the
second defines the minimum number of entries to attempt parallel
checkout.
To decide the default value for checkout.workers, the parallel version
was benchmarked during three operations in the linux repo, with cold
cache: cloning v5.8, checking out v5.8 from v2.6.15 (checkout I) and
checking out v5.8 from v5.7 (checkout II). The four tables below show
the mean run times and standard deviations for 5 runs in: a local file
system on SSD, a local file system on HDD, a Linux NFS server, and
Amazon EFS (all on Linux). Each parallel checkout test was executed with
the number of workers that brings the best overall results in that
environment.
Local SSD:
Sequential 10 workers Speedup
Clone 8.805 s ± 0.043 s 3.564 s ± 0.041 s 2.47 ± 0.03
Checkout I 9.678 s ± 0.057 s 4.486 s ± 0.050 s 2.16 ± 0.03
Checkout II 5.034 s ± 0.072 s 3.021 s ± 0.038 s 1.67 ± 0.03
Local HDD:
Sequential 10 workers Speedup
Clone 32.288 s ± 0.580 s 30.724 s ± 0.522 s 1.05 ± 0.03
Checkout I 54.172 s ± 7.119 s 54.429 s ± 6.738 s 1.00 ± 0.18
Checkout II 40.465 s ± 2.402 s 38.682 s ± 1.365 s 1.05 ± 0.07
Linux NFS server (v4.1, on EBS, single availability zone):
Sequential 32 workers Speedup
Clone 240.368 s ± 6.347 s 57.349 s ± 0.870 s 4.19 ± 0.13
Checkout I 242.862 s ± 2.215 s 58.700 s ± 0.904 s 4.14 ± 0.07
Checkout II 65.751 s ± 1.577 s 23.820 s ± 0.407 s 2.76 ± 0.08
EFS (v4.1, replicated over multiple availability zones):
Sequential 32 workers Speedup
Clone 922.321 s ± 2.274 s 210.453 s ± 3.412 s 4.38 ± 0.07
Checkout I 1011.300 s ± 7.346 s 297.828 s ± 0.964 s 3.40 ± 0.03
Checkout II 294.104 s ± 1.836 s 126.017 s ± 1.190 s 2.33 ± 0.03
The above benchmarks show that parallel checkout is most effective on
repositories located on an SSD or over a distributed file system. For
local file systems on spinning disks, and/or older machines, the
parallelism does not always bring a good performance. For this reason,
the default value for checkout.workers is one, a.k.a. sequential
checkout.
To decide the default value for checkout.thresholdForParallelism,
another benchmark was executed in the "Local SSD" setup, where parallel
checkout showed to be beneficial. This time, we compared the runtime of
a `git checkout -f`, with and without parallelism, after randomly
removing an increasing number of files from the Linux working tree. The
"sequential fallback" column below corresponds to the executions where
checkout.workers was 10 but checkout.thresholdForParallelism was equal
to the number of to-be-updated files plus one (so that we end up writing
sequentially). Each test case was sampled 15 times, and each sample had
a randomly different set of files removed. Here are the results:
sequential fallback 10 workers speedup
10 files 772.3 ms ± 12.6 ms 769.0 ms ± 13.6 ms 1.00 ± 0.02
20 files 780.5 ms ± 15.8 ms 775.2 ms ± 9.2 ms 1.01 ± 0.02
50 files 806.2 ms ± 13.8 ms 767.4 ms ± 8.5 ms 1.05 ± 0.02
100 files 833.7 ms ± 21.4 ms 750.5 ms ± 16.8 ms 1.11 ± 0.04
200 files 897.6 ms ± 30.9 ms 730.5 ms ± 14.7 ms 1.23 ± 0.05
500 files 1035.4 ms ± 48.0 ms 677.1 ms ± 22.3 ms 1.53 ± 0.09
1000 files 1244.6 ms ± 35.6 ms 654.0 ms ± 38.3 ms 1.90 ± 0.12
2000 files 1488.8 ms ± 53.4 ms 658.8 ms ± 23.8 ms 2.26 ± 0.12
From the above numbers, 100 files seems to be a reasonable default value
for the threshold setting.
Note: Up to 1000 files, we observe a drop in the execution time of the
parallel code with an increase in the number of files. This is a rather
odd behavior, but it was observed in multiple repetitions. Above 1000
files, the execution time increases according to the number of files, as
one would expect.
About the test environments: Local SSD tests were executed on an
i7-7700HQ (4 cores with hyper-threading) running Manjaro Linux. Local
HDD tests were executed on an Intel(R) Xeon(R) E3-1230 (also 4 cores
with hyper-threading), HDD Seagate Barracuda 7200.14 SATA 3.1, running
Debian. NFS and EFS tests were executed on an Amazon EC2 c5n.xlarge
instance, with 4 vCPUs. The Linux NFS server was running on a m6g.large
instance with 2 vCPUSs and a 1 TB EBS GP2 volume. Before each timing,
the linux repository was removed (or checked out back to its previous
state), and `sync && sysctl vm.drop_caches=3` was executed.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new interface allows us to enqueue some of the entries being
checked out to later uncompress them, apply in-process filters, and
write out the files in parallel. For now, the parallel checkout
machinery is enabled by default and there is no user configuration, but
run_parallel_checkout() just writes the queued entries in sequence
(without spawning additional workers). The next patch will actually
implement the parallelism and, later, we will make it configurable.
Note that, to avoid potential data races, not all entries are eligible
for parallel checkout. Also, paths that collide on disk (e.g.
case-sensitive paths in case-insensitive file systems), are detected by
the parallel checkout code and skipped, so that they can be safely
sequentially handled later. The collision detection works like the
following:
- If the collision was at basename (e.g. 'a/b' and 'a/B'), the framework
detects it by looking for EEXIST and EISDIR errors after an
open(O_CREAT | O_EXCL) failure.
- If the collision was at dirname (e.g. 'a/b' and 'A'), it is detected
at the has_dirs_only_path() check, which is done for the leading path
of each item in the parallel checkout queue.
Both verifications rely on the fact that, before enqueueing an entry for
parallel checkout, checkout_entry() makes sure that there is no file at
the entry's path and that its leading components are all real
directories. So, any later change in these conditions indicates that
there was a collision (either between two parallel-eligible entries or
between an eligible and an ineligible one).
After all parallel-eligible entries have been processed, the collided
(and thus, skipped) entries are sequentially fed to checkout_entry()
again. This is similar to the way the current code deals with
collisions, overwriting the previously checked out entries with the
subsequent ones. The only difference is that, since we no longer create
the files in the same order that they appear on index, we are not able
to determine which of the colliding entries will survive on disk (for
the classic code, it is always the last entry).
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparatory API changes for parallel checkout.
* mt/parallel-checkout-part-1:
entry: add checkout_entry_ca() taking preloaded conv_attrs
entry: move conv_attrs lookup up to checkout_entry()
entry: extract update_ce_after_write() from write_entry()
entry: make fstat_output() and read_blob_entry() public
entry: extract a header file for entry.c functions
convert: add classification for conv_attrs struct
convert: add get_stream_filter_ca() variant
convert: add [async_]convert_to_working_tree_ca() variants
convert: make convert_attrs() and convert structs public
|
|
When "git checkout" removes a path that does not exist in the
commit it is checking out, it wasn't careful enough not to follow
symbolic links, which has been corrected.
* mt/checkout-remove-nofollow:
checkout: don't follow symlinks when removing entries
symlinks: update comment on threaded_check_leading_path()
|
|
The index_pos_by_traverse_info() currently throws a BUG() when a
directory entry exists exactly in the index. We need to consider that it
is possible to have a directory in a sparse index as long as that entry
is itself marked with the skip-worktree bit.
The 'pos' variable is assigned a negative value if an exact match is not
found. Since a directory name can be an exact match, it is no longer an
error to have a nonnegative 'pos' value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next change will translate full indexes into sparse indexes at write
time. The existing logic provides a way for every sparse index to be
expanded to a full index at read time. However, there are cases where an
index is written and then continues to be used in-memory to perform
further updates.
unpack_trees() is frequently called after such a write. In particular,
commands like 'git reset' do this double-update of the index.
Ensure that we have a full index when entering unpack_trees(), but only
when command_requires_full_index is true. This is always true at the
moment, but we will later relax that after unpack_trees() is updated to
handle sparse directory entries.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The declarations of entry.c's public functions and structures currently
reside in cache.h. Although not many, they contribute to the size of
cache.h and, when changed, cause the unnecessary recompilation of
modules that don't really use these functions. So let's move them to a
new entry.h header. While at it let's also move a comment related to
checkout_entry() from entry.c to entry.h as it's more useful to describe
the function there.
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash show" learned to optionally show untracked part of the
stash.
* dl/stash-show-untracked:
stash show: learn stash.showIncludeUntracked
stash show: teach --include-untracked and --only-untracked
|
|
The data structure used by fsmonitor interface was not properly
duplicated during an in-core merge, leading to use-after-free etc.
* js/fsmonitor-unpack-fix:
fsmonitor: do not forget to release the token in `discard_index()`
fsmonitor: fix memory corruption in some corner cases
|
|
At 1d718a5108 ("do not overwrite untracked symlinks", 2011-02-20),
symlink.c:check_leading_path() started returning different codes for
FL_ENOENT and FL_SYMLINK. But one of its callers, unlink_entry(), was
not adjusted for this change, so it started to follow symlinks on the
leading path of to-be-removed entries. Fix that and add a regression
test.
Note that since 1d718a5108 check_leading_path() no longer differentiates
the case where it found a symlink in the path's leading components from
the cases where it found a regular file or failed to lstat() the
component. So, a side effect of this current patch is that
unlink_entry() now returns early in all of these three cases. And
because we no longer try to unlink such paths, we also don't get the
warning from remove_or_warn().
For the regular file and symlink cases, it's questionable whether the
warning was useful in the first place: unlink_entry() removes tracked
paths that should no longer be present in the state we are checking out
to. If the path had its leading dir replaced by another file, it means
that the basename already doesn't exist, so there is no need for a
warning. Sure, we are leaving a regular file or symlink behind at the
path's dirname, but this file is either untracked now (so again, no
need to warn), or it will be replaced by a tracked file during the next
phase of this checkout operation.
As for failing to lstat() one of the leading components, the basename
might still exist only we cannot unlink it (e.g. due to the lack of the
required permissions). Since the user expect it to be removed
(especially with checkout's --no-overlay option), add back the warning
in this more relevant case.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 56c6910028a (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust the part
of `unpack_trees()` that copies the FSMonitor "last-update" information
that we copy from the source index to the result index since 679f2f9fdd2
(unpack-trees: skip stat on fsmonitor-valid files, 2019-11-20).
Since the "last-update" information is no longer a 64-bit number, but a
free-form string that has been allocated, we need to duplicate it rather
than just copying it.
This is important because there _are_ cases when `unpack_trees()` will
perform a oneway merge that implicitly calls `refresh_fsmonitor()`
(which will allocate that "last-update" token). This happens _after_
that token was copied into the result index. However, we _then_ call
`check_updates()` on that index, which will _also_ call
`refresh_fsmonitor()`, accessing the "last-update" string, which by now
would be released already.
In the instance that lead to this patch, this caused a segmentation
fault during a lengthy, complicated rebase involving the todo command
`reset` that (crucially) had to updated many files. Unfortunately, it
seems very hard to trigger that crash, therefore this patch is not
accompanied by a regression test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stash entries can be made with untracked files via
`git stash push --include-untracked`. However, because the untracked
files are stored in the third parent of the stash entry and not the
stash entry itself, running `git stash show` does not include the
untracked files as part of the diff.
With --include-untracked, untracked paths, which are recorded in the
third-parent if it exists, are shown in addition to the paths that have
modifications between the stash base and the working tree in the stash.
It is possible to manually craft a malformed stash entry where duplicate
untracked files in the stash entry will mask tracked files. We detect
and error out in that case via a custom unpack_trees() callback:
stash_worktree_untracked_merge().
Also, teach stash the --only-untracked option which only shows the
untracked files of a stash entry. This is similar to `git show stash^3`
but it is nice to provide a convenient abstraction for it so that users
do not have to think about the underlying implementation.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.28:
Git 2.28.1
Git 2.27.1
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.26:
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.25:
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.24:
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.23:
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.22:
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.21:
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.20:
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.19:
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.18:
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.17:
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
We really want to avoid relying on stale information.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
A future feature will want to load the sparse-checkout patterns into a
pattern_list, but the current mechanism to do so is a bit complicated.
This is made difficult due to needing to find the sparse-checkout file
in different ways throughout the codebase.
The logic implemented in the new get_sparse_checkout_patterns() was
duplicated in populate_from_existing_patterns() in unpack-trees.c. Use
the new method instead, keeping the logic around handling the struct
unpack_trees_options.
The callers to get_sparse_checkout_filename() in
builtin/sparse-checkout.c manipulate the sparse-checkout file directly,
so it is not appropriate to replace logic in that file with
get_sparse_checkout_patterns().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the method safer by allocating a cache_tree member for the given
index_state if it is not already present. This is preferrable to a
BUG() statement or returning with an error because future callers will
want to populate an empty cache-tree using this method.
Callers can also remove their conditional allocations of cache_tree.
Also drop local variables that can be found directly from the 'istate'
parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The unpack_trees() method is quite complicated and its performance can
change dramatically depending on how it is used. We already have some
performance tracing regions, but they have not been updated to the
trace2 API. Do so now.
We already have trace2 regions in unpack_trees.c:clear_ce_flags(), which
uses a linear scan through the index without recursing into trees.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consistency fix to a topic already in 'master'.
* en/sparse-checkout:
unpack-trees: also allow get_progress() to work on a different index
|
|
commit b0a5a12a60 ("unpack-trees: allow check_updates() to work on a
different index", 2020-03-27) allowed check_updates() to work on a
different index, but it called get_progress() which was hardcoded to
work on o->result much like check_updates() had been. Update it to also
accept an index parameter and have check_updates() pass that parameter
along so that both are working on the same index.
Noticed-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to skip unmerged paths in the index when sparse checkout
is in use would have made out-of-bound access of the in-core index
when the last path was unmerged, which has been corrected.
* ds/sparse-updates-oob-access-fix:
unpack-trees: avoid array out-of-bounds error
|
|
The sparse-checkout patterns have been forbidden from excluding all
paths, leaving an empty working tree, for a long time. This
limitation has been lifted.
* ds/sparse-allow-empty-working-tree:
sparse-checkout: stop blocking empty workdirs
|
Junio C Hamano
Matheus Tavares
Ben Boeckel
Jonathan Tan
Derrick Stolee
Johannes Schindelin
Denton Liu
Jeff King
Elijah Newren