| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Submodules should be handled the same as regular directories with
respect to the presence of a trailing slash, i.e. commands like:
git diff rev1 rev2 -- $path
git rev-list HEAD -- $path
should produce the same output whether $path is 'submod' or 'submod/'.
This has been fixed in commit 74b4f7f277 (tree-walk.c: ignore trailing
slash on submodule in tree_entry_interesting(), 2014-01-23).
Unfortunately, that commit had the unintended side effect to handle
'submod/anything' the same as 'submod' and 'submod/' as well, e.g.:
$ git log --oneline --name-only -- sha1collisiondetection/whatever
4125f78222 sha1dc: update from upstream
sha1collisiondetection
07a20f569b Makefile: fix unaligned loads in sha1dc with UBSan
sha1collisiondetection
23e37f8e9d sha1dc: update from upstream
sha1collisiondetection
86cfd61e6b sha1dc: optionally use sha1collisiondetection as a submodule
sha1collisiondetection
Fix this by rejecting submodules as partial pathnames when their
trailing slash is followed by anything.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The unpack-trees API depends on the tree-walk API. But we've recently
introduced a dependency in tree-walk.c on MAX_UNPACK_TREES, which
doesn't otherwise care about unpack-trees at all.
Let's break that dependency by reversing the constants: we'll introduce
a new MAX_TRAVERSE_TREES which belongs to the tree-walk API. And then we
can define MAX_UNPACK_TREES in terms of that (since unpack-trees cannot
possibly work with more trees than it can traverse at once via
tree-walk).
The value for both will remain at 8. This is somewhat arbitrary and
probably more than is necessary, per ca885a4fe6 (read-tree() and
unpack_trees(): use consistent limit, 2008-03-13), but there's not
really any pressing need to reduce it.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We heap-allocate our arrays of name_entry structs, etc, with one entry
per tree we're asked to traverse. The code does a raw multiplication in
the xmalloc() call, which I find when auditing for integer overflows
during allocation.
We could "fix" this by using ALLOC_ARRAY() instead. But as it turns out,
the maximum size of these arrays is limited at compile time:
- merge_trees() always passes in 3 trees
- unpack_trees() and its brethren never pass in more than
MAX_UNPACK_TREES
So we can simplify even further by just using a stack array and bounding
it with MAX_UNPACK_TREES. There should be no concern with overflowing
the stack, since MAX_UNPACK_TREES is only 8 and the structs themselves
are small.
Note that since we're replacing xcalloc(), we have to move one of the
NULL initializations into a loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier update to Git for Windows declared that a tree object is
invalid if it has a path component with backslash in it, which was
overly strict, which has been corrected. The only protection the
Windows users need is to prevent such path (or any path that their
filesystem cannot check out) from entering the index.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: only test index entries for backslashes, not tree entries
|
|
During a clone of a repository that contained a file with a backslash in
its name in the past, as of v2.24.1(2), Git for Windows prints errors
like this:
error: filename in tree entry contains backslash: '\'
The idea is to prevent Git from even trying to write files with
backslashes in their file names: while these characters are valid in
file names on other platforms, on Windows it is interpreted as directory
separator (which would obviously lead to ambiguities, e.g. when there is
a file `a\b` and there is also a file `a/b`).
Arguably, this is the wrong layer for that error: As long as the user
never checks out the files whose names contain backslashes, there should
not be any problem in the first place.
So let's loosen the requirements: we now leave tree entries with
backslashes in their file names alone, but we do require any entries
that are added to the Git index to contain no backslashes on Windows.
Note: just as before, the check is guarded by `core.protectNTFS` (to
allow overriding the check by toggling that config setting), and it
is _only_ performed on Windows, as the backslash is not a directory
separator elsewhere, even when writing to NTFS-formatted volumes.
An alternative approach would be to try to prevent creating files with
backslashes in their file names. However, that comes with its own set of
problems. For example, `git config -f C:\ProgramData\Git\config ...` is
a very valid way to specify a custom config location, and we obviously
do _not_ want to prevent that. Therefore, the approach chosen in this
patch would appear to be better.
This addresses https://github.com/git-for-windows/git/issues/2435
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Doc update for the mailing list archiving and nntp service.
* jk/lore-is-the-archive:
doc: replace public-inbox links with lore.kernel.org
doc: recommend lore.kernel.org over public-inbox.org
|
|
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
|
|
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
|
|
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
|
|
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
|
|
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
|
|
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
|
|
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
|
|
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
|
|
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
|
|
The backslash character is not a valid part of a file name on Windows.
Hence it is dangerous to allow writing files that were unpacked from
tree objects, when the stored file name contains a backslash character:
it will be misinterpreted as directory separator.
This not only causes ambiguity when a tree contains a blob `a\b` and a
tree `a` that contains a blob `b`, but it also can be used as part of an
attack vector to side-step the careful protections against writing into
the `.git/` directory during a clone of a maliciously-crafted
repository.
Let's prevent that, addressing CVE-2019-1354.
Note: we guard against backslash characters in tree objects' file names
_only_ on Windows (because on other platforms, even on those where NTFS
volumes can be mounted, the backslash character is _not_ a directory
separator), and _only_ when `core.protectNTFS = true` (because users
might need to generate tree objects for other platforms, of course
without touching the worktree, e.g. using `git update-index
--cacheinfo`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Since we're now recommending lore.kernel.org (and because the
public-inbox.org domain might eventually go away), let's update our
internal references to use it, too. That future-proofs our references,
and sets the example we want people to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Codepaths to walk tree objects have been audited for integer
overflows and hardened.
* jk/tree-walk-overflow:
tree-walk: harden make_traverse_path() length computations
tree-walk: add a strbuf wrapper for make_traverse_path()
tree-walk: accept a raw length for traverse_path_len()
tree-walk: use size_t consistently
tree-walk: drop oid from traverse_info
setup_traverse_info(): stop copying oid
|
|
The make_traverse_path() function isn't very careful about checking its
output buffer boundaries. In fact, it doesn't even _know_ the size of
the buffer it's writing to, and just assumes that the caller used
traverse_path_len() correctly. And even then we assume that our
traverse_info.pathlen components are all correct, and just blindly write
into the buffer.
Let's improve this situation a bit:
- have the caller pass in their allocated buffer length, which we'll
check against our own computations
- check for integer underflow as we do our backwards-insertion of
pathnames into the buffer
- check that we do not run out items in our list to traverse before
we've filled the expected number of bytes
None of these should be triggerable in practice (especially since our
switch to size_t everywhere in a previous commit), but it doesn't hurt
to check our assumptions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All but one of the callers of make_traverse_path() allocate a new heap
buffer to store the path. Let's give them an easy way to write to a
strbuf, which saves them from computing the length themselves (which is
especially tricky when they want to add to the path). It will also make
it easier for us to change the make_traverse_path() interface in a
future patch to improve its bounds-checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We store and manipulate the cumulative traverse_info.pathlen as an
"int", which can overflow when we are fed ridiculously long pathnames
(e.g., ones at the edge of 2GB or 4GB, even if the individual tree entry
names are smaller than that). The results can be confusing, though
after some prodding I was not able to use this integer overflow to cause
an under-allocated buffer.
Let's consistently use size_t to generate and store these, and make
sure our addition doesn't overflow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the previous commit shows, the presence of an oid in each level of
the traverse_info is confusing and ultimately not necessary. Let's drop
it to make it clear that it will not always be set (as well as convince
us that it's unused, and let the compiler catch any merges with other
branches that do add new uses).
Since the oid is part of name_entry, we'll actually stop embedding a
name_entry entirely, and instead just separately hold the pathname, its
length, and the mode.
This makes the resulting code slightly more verbose as we have to pass
those elements around individually. But it also makes it more clear what
each code path is going to use (and in most of the paths, we really only
care about the pathname itself).
A few of these conversions are noisier than they need to be, as they
also take the opportunity to rename "len" to "namelen" for clarity
(especially where we also have "pathlen" or "ce_len" alongside).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We assume that if setup_traverse_info() is passed a non-empty "base"
string, that string is pointing into a tree object and we can read the
object oid by skipping past the trailing NUL.
As it turns out, this is not true for either of the two calls, and we
may end up reading garbage bytes:
1. In git-merge-tree, our base string is either empty (in which case
we'd never run this code), or it comes from our traverse_path()
helper. The latter overallocates a buffer by the_hash_algo->rawsz
bytes, but then fills it with only make_traverse_path(), leaving
those extra bytes uninitialized (but part of a legitimate heap
buffer).
2. In unpack_trees(), we pass o->prefix, which is some arbitrary
string from the caller. In "git read-tree --prefix=foo", for
instance, it will point to the command-line parameter, and we'll
read 20 bytes past the end of the string.
Interestingly, tools like ASan do not detect (2) because the process
argv is part of a big pre-allocated buffer. So we're reading trash, but
it's trash that's probably part of the next argument, or the
environment.
You can convince it to fail by putting something like this at the
beginning of common-main.c's main() function:
{
int i;
for (i = 0; i < argc; i++)
argv[i] = xstrdup_or_null(argv[i]);
}
That puts the arguments into their own heap buffers, so running:
make SANITIZE=address test
will find problems when "read-tree --prefix" is used (e.g., in t3030).
Doubly interesting, even with the hackery above, this does not fail
prior to ea82b2a085 (tree-walk: store object_id in a separate member,
2019-01-15). That commit switched setup_traverse_info() to actually
copying the hash, rather than simply pointing to it. That pointer was
always pointing to garbage memory, but that commit started actually
dereferencing the bytes, which is what triggers ASan.
That also implies that nobody actually cares about reading these oid
bytes anyway (or at least no path covered by our tests). And manual
inspection of the code backs that up (I'll follow this patch with some
cleanups that show definitively this is the case, but they're quite
invasive, so it's worth doing this fix on its own).
So let's drop the bogus hashcpy(), along with the confusing oversizing
in merge-tree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
struct diff_filespec defines mode to be an 'unsigned short'. Several
other places in the API which we'd like to interact with using a
diff_filespec used a plain unsigned (or unsigned int). This caused
problems when taking addresses, so switch to unsigned short.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cat-file --batch" reported a dangling symbolic link by
mistake, when it wanted to report that a given name is ambiguous.
* dt/cat-file-batch-ambiguous:
t1512: test ambiguous cat-file --batch and --batch-output
Do not print 'dangling' for cat-file in case of ambiguity
|
|
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
|
|
The return values -1 and -2 from get_oid could mean two different
things, depending on whether they were from an enum returned by
get_tree_entry_follow_symlinks, or from a different code path. This
caused 'dangling' to be printed from a git cat-file in the case of an
ambiguous (-2) result.
Unify the results of get_oid* and get_tree_entry_follow_symlinks to be
one common type, with unambiguous values.
Signed-off-by: David Turner <novalis@novalis.org>
Reported-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing a tree, we read the object ID directly out of the tree
buffer. This is normally fine, but such an object ID cannot be used with
oidcpy, which copies GIT_MAX_RAWSZ bytes, because if we are using SHA-1,
there may not be that many bytes to copy.
Instead, store the object ID in a separate struct member. Since we can
no longer efficiently compute the path length, store that information as
well in struct name_entry. Ensure we only copy the object ID into the
new buffer if the path length is nonzero, as some callers will pass us
an empty path with no object ID following it, and we will not want to
read past the end of the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a future commit, the pointer returned by tree_entry_extract will
point into the struct tree_desc, causing its lifetime to be bound to
that of the struct tree_desc itself. To ensure this code path keeps
working, copy the object_id into a local variable so that it lives long
enough.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lets us use :(attr) with "git grep <tree-ish>" or "git log".
:(attr) requires another round of checking before we can declare that
a path is matched. This is done after path matching since we have lots
of optimization to take a shortcut when things don't match.
Note that if :(attr) is present, we can't return
all_entries_interesting / all_entries_not_interesting anymore because
we can't be certain about that. Not until match_pathspec_attrs() can
tell us "yes all these paths satisfy :(attr)".
Second note. Even though we walk a specific tree, we use attributes
from _worktree_ (or falling back to the index), not from .gitattributes
files on that tree. This by itself is not necessarily wrong, but the
user just have to be aware of this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to support :(attr) when matching pathspec on a tree,
tree_entry_interesting() needs to take an index (because
git_check_attr() needs it). This is the preparation step for it. This
also makes it clearer what index we fall back to when looking up
attributes during an unpack-trees operation: the source index.
This also fixes revs->pruning.repo initialization that should have
been done in 2abf350385 (revision.c: remove implicit dependency on
the_index - 2018-09-21). Without it, skip_uninteresting() will
dereference a NULL pointer through this call chain
get_revision(revs)
get_revision_internal
get_revision_1
try_to_simplify_commit
rev_compare_tree
diff_tree_oid(..., &revs->pruning)
ll_diff_tree_oid
diff_tree_paths
ll_diff_tree
skip_uninteresting
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pathspec matching against a tree object were buggy when negative
pathspec elements were involved, which has been fixed.
* nd/tree-walk-path-exclusion:
tree-walk.c: fix overoptimistic inclusion in :(exclude) matching
|
|
tree_entry_interesting() is used for matching pathspec on a tree. The
interesting thing about this function is that, because the tree
entries are known to be sorted, this function can return more than
just "yes, matched" and "no, not matched". It can also say "yes, this
entry is matched and so is the remaining entries in the tree".
This is where I made a mistake when matching exclude pathspec. For
exclude pathspec, we do matching twice, one with positive patterns and
one with negative ones, then a rule table is applied to determine the
final "include or exclude" result. Note that "matched" does not
necessarily mean include. For negative patterns, "matched" means
exclude.
This particular rule is too eager to include everything. Rule 8 says
that "if all entries are positively matched" and the current entry is
not negatively matched (i.e. not excluded), then all entries are
positively matched and therefore included. But this is not true. If
the _current_ entry is not negatively matched, it does not mean the
next one will not be and we cannot conclude right away that all
remaining entries are positively matched and can be included.
Rules 8 and 18 are now updated to be less eager. We conclude that the
current entry is positively matched and included. But we say nothing
about remaining entries. tree_entry_interesting() will be called again
for those entries where we will determine entries individually.
Reported-by: Christophe Bliard <christophe.bliard@trux.info>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Remove the hard-coded 20-based values and replace them with uses of
the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the only caller of this function already uses struct object_id,
update get_tree_entry_follow_symlinks to use it in parameters and
internally.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the_hash_algo to look up the length of our current hash instead of
hard-coding the value 20.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert read_object_with_reference to take pointers to struct object_id.
Update the internals of the function accordingly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert get_tree_entry and find_tree_entry to take pointers to struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the internals of this function to use struct object_id. This is
one of the last remaining callers of read_sha1_file_extended that has
not been converted yet.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An v2.12-era regression in pathspec match logic, which made it look
into submodule tree even when it is not desired, has been fixed.
* bw/pathspec-match-submodule-boundary:
pathspec: only match across submodule boundaries when requested
|
|
Commit 74ed43711fd (grep: enable recurse-submodules to work on <tree>
objects, 2016-12-16) taught 'tree_entry_interesting()' to be able to
match across submodule boundaries in the presence of wildcards. This is
done by performing literal matching up to the first wildcard and then
punting to the submodule itself to perform more accurate pattern
matching. Instead of introducing a new flag to request this behavior,
commit 74ed43711fd overloaded the already existing 'recursive' flag in
'struct pathspec' to request this behavior.
This leads to a bug where whenever any other caller has the 'recursive'
flag set as well as a pathspec with wildcards that all submodules will
be indicated as matches. One simple example of this is:
git init repo
cd repo
git init submodule
git -C submodule commit -m initial --allow-empty
touch "[bracket]"
git add "[bracket]"
git commit -m bracket
git add submodule
git commit -m submodule
git rev-list HEAD -- "[bracket]"
Fix this by introducing the new flag 'recurse_submodules' in 'struct
pathspec' and using this flag to determine if matches should be allowed
to cross submodule boundaries.
This fixes https://github.com/git-for-windows/git/issues/1371.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
SZEDER Gábor
Jeff King
Junio C Hamano
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Elijah Newren
David Turner
brian m. carlson
Stefan Beller
Brandon Williams