summaryrefslogtreecommitdiff
path: root/templates
AgeCommit message (Collapse)AuthorFilesLines
2014-12-01*.sh: avoid hardcoding $GIT_DIR/hooks/...Libravatar Nguyễn Thái Ngọc Duy2-4/+4
If $GIT_COMMON_DIR is set, it should be $GIT_COMMON_DIR/hooks/, not $GIT_DIR/hooks/. Just let rev-parse --git-path handle it. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-11pre-push.sample: Write error message to stderrLibravatar W. Trevor King1-1/+1
githooks(5) suggests: Information about why the push is rejected may be sent to the user by writing to standard error. So follow that advice in the sample. Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-24sample pre-commit hook: use --bool when retrieving config varLibravatar Johan Herland1-1/+1
Currently if you set [hooks] allowNonAscii (or allownonascii = 1, or = yes) in your .git/config then the sample pre-commit misinterprets the value as "false" and rejects non-ASCII filenames. Use "git config --bool" to get the usual nicer boolean handling. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-03Merge branch 'maint-1.8.3' into maintLibravatar Junio C Hamano1-0/+1
* maint-1.8.3: fix shell syntax error in template
2013-08-30fix shell syntax error in templateLibravatar Thorsten Glaser1-0/+1
An if clause must not be empty; add a "colon" command. Signed-off-by: Thorsten Glaser <t.glaser@tarent.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15templates: spell ASCII in uppercase in pre-commit hookLibravatar Richard Hartmann1-3/+3
The name of the encoding is ASCII, not ascii. Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15templates: Reformat pre-commit hook's messageLibravatar Richard Hartmann1-4/+2
Now that we're using heredoc, the message can span the full 80 chars. Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15templates: Use heredoc in pre-commit hookLibravatar Richard Hartmann1-12/+13
This way, it is easier to see how the text we give the end users would look like, and it will allow us to use (near) full width of the source file. Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-11pre-push.sample: Make the script executableLibravatar Wieland Hoffmann1-0/+0
githooks(5) says that "[...]the .sample files are executable by default" which was not true. Signed-off-by: Wieland Hoffmann <themineo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-24templates/hooks--update.sample: use a lowercase "usage:" stringLibravatar David Aguilar1-1/+1
Make the usage string consistent with Git. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-18Add sample pre-push hook scriptLibravatar Aaron Schrab1-0/+53
Create a sample of a script for a pre-push hook. The main purpose is to illustrate how a script may parse the information which is supplied to such a hook. The script may also be useful to some people as-is for avoiding to push commits which are marked as a work in progress. Signed-off-by: Aaron Schrab <aaron@schrab.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-26Merge branch 'maint-1.7.6' into maintLibravatar Junio C Hamano1-2/+6
* maint-1.7.6: make the sample pre-commit hook script reject names with newlines, too git-read-tree.txt: update sparse checkout examples git-read-tree.txt: correct sparse-checkout and skip-worktree description git-read-tree.txt: language and typography fixes unpack-trees: print "Aborting" to stderr Documentation/git-update-index: refer to 'ls-files' Documentation: basic configuration of notes.rewriteRef
2011-10-26make the sample pre-commit hook script reject names with newlines, tooLibravatar Jim Meyering1-2/+6
The sample pre-commit hook script would fail to reject a file name like "a\nb" because of the way newlines are handled in "$(...)". Adjust the test to count filtered bytes and require there be 0. Also print all diagnostics to standard error, not stdout, so they will actually be seen. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-27templates/hooks--*: remove sample hooks without any functionalityLibravatar Gerrit Pape2-23/+0
Remove the sample post-commit and post-receive hooks. The sample post-commit doesn't contain any sample functionality and the comments do not provide more information than already found in the documentation. The sample post-receive hooks doesn't provide any sample functionality either and refers in the comments to a contrib hook that might be installed in different locations on different systems, which isn't that helpful. Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20Modernize git calling conventions in hook templatesLibravatar Ben Walton7-17/+17
The hook templates were still using/referencing 'git-foo' instead of 'git foo.' This patch updates the sample hooks to use the modern conventions instead. Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20Make templates honour SHELL_PATH and PERL_PATHLibravatar Ben Walton3-5/+18
The hook script templates were hard coded to use /bin/sh and perl. This patch ensures that they use the same tools specified for the rest of the suite. The impetus for the change was noticing that, as shipped, some of the hooks used shell constructs that wouldn't work under Solaris' /bin/sh (eg: $(cmd...) substitutions). Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-15Merge branch 'bs/maint-pre-commit-hook-sample'Libravatar Junio C Hamano1-9/+9
* bs/maint-pre-commit-hook-sample: pre-commit.sample: Diff against the empty tree when HEAD is invalid
2009-11-06pre-commit.sample: Diff against the empty tree when HEAD is invalidLibravatar Björn Steinbrink1-9/+9
This was already the case for the old "diff --check" call, but the new one that checks whether there are any non-ascii file names was missing it, making that check fail for root commits. Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31Revert "Don't create the $GIT_DIR/branches directory on init"Libravatar Junio C Hamano1-0/+1
This reverts commit 0cc5691a8b05a7eabdeef520c94b1bb3bcac7874. There is not enough justification for doing this. We do not update things in .git/branches and .git/remotes anymore, but still do read information from there and will keep doing so. Besides, this breaks quite a lot of tests in t55?? series.
2009-10-30Don't create the $GIT_DIR/branches directory on initLibravatar Robin Rosenberg1-1/+0
Git itself does not even look at this directory. Any tools that actually needs it should create it itself. Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-24Work around option parsing bug in the busybox tar implementationLibravatar Andreas Schwab1-1/+1
The first argument of the tar command is interpreted as a bundle of letters specifying the mode of operation and additional options, with any option arguments taken from subsequent words on the command line as needed. The implementation of tar in busybox treats this bundle as if preceded by a dash and then parses it by getopt rules, which mishandles 'tar xfo -'. Use 'tar xof -' instead to work this around. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-29Correct minor typo in post-receive hook templateLibravatar Frederik Schwarzer1-1/+1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2009-09-22pre-commit.sample: add comment re tr portability; fix grammarLibravatar Jim Meyering1-4/+7
Add a comment explaining why square brackets around a tr range are not only ok, but actually required in this case. Correct spelling and grammar. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-23Merge branch 'hv/sample-update'Libravatar Junio C Hamano1-0/+10
* hv/sample-update: Extend sample update hook, disable modifying of existing tags
2009-05-20Extend sample pre-commit hook to check for non ascii filenamesLibravatar Heiko Voigt1-0/+25
At the moment non-ascii encodings of filenames are not portably converted between different filesystems by git. This will most likely change in the future but to allow repositories to be portable among different file/operating systems this check is enabled by default. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-16pre-commit.sample: don't print incidental SHA1Libravatar Jim Meyering1-1/+1
Make the sample pre-commit hook script discard all git-rev-parse output, not just stderr. Otherwise, it would print an SHA1. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-09Extend sample update hook, disable modifying of existing tagsLibravatar Heiko Voigt1-0/+10
Because no special rule for this existed it was allowed by default Signed-off-by: Heiko Voigt <heiko.voigt@mahr.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-17hook/update: example of how to prevent branch creationLibravatar Pierre Habouzit1-1/+10
Since git doesn't provide a receive.denyBranchCreation or similar, here is an example of how to be sure users cannot create branches remotely by pushing a new reference. This setup has been proven useful to prevent creation of spurious branches because of users having their remote.origin.push set to HEAD, when they use `git push` while being on a local topic branch of theirs instead of the proper one. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-04Modify description file to say what this file isLibravatar John Tapsell2-3/+5
A lot of people see this message for the first time on the gitweb interface, where there is no clue as to what 'this file' means. Signed-off-by: John Tapsell <johnflux@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-09Fix permission bits on sources checked out with an overtight umaskLibravatar Junio C Hamano1-5/+7
Two patches 9907721 (templates/Makefile: don't depend on local umask setting, 2008-02-28) and 96cda0b (templates/Makefile: install is unnecessary, just use mkdir -p, 2008-08-21) tried to prevent an overtight umask the builder/installer might have from screwing over the installation procedure, but we forgot there was another source of trouble. If the person who checked out the source tree had an overtight umask, it will leak out to the built products, which is propagated to the installation destination. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-20Install templates with the user and group of the installing personalityLibravatar Johannes Sixt1-1/+1
If 'make install' was run with sufficient privileges, then the installed templates, which are copied using 'tar', would receive the user and group of whoever built git. This instructs 'tar' to ignore the user and group that are recorded in the archive. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-02Merge branch 'j6t/mingw'Libravatar Junio C Hamano1-4/+4
* j6t/mingw: (38 commits) compat/pread.c: Add a forward declaration to fix a warning Windows: Fix ntohl() related warnings about printf formatting Windows: TMP and TEMP environment variables specify a temporary directory. Windows: Make 'git help -a' work. Windows: Work around an oddity when a pipe with no reader is written to. Windows: Make the pager work. When installing, be prepared that template_dir may be relative. Windows: Use a relative default template_dir and ETC_GITCONFIG Windows: Compute the fallback for exec_path from the program invocation. Turn builtin_exec_path into a function. Windows: Use a customized struct stat that also has the st_blocks member. Windows: Add a custom implementation for utime(). Windows: Add a new lstat and fstat implementation based on Win32 API. Windows: Implement a custom spawnve(). Windows: Implement wrappers for gethostbyname(), socket(), and connect(). Windows: Work around incompatible sort and find. Windows: Implement asynchronous functions as threads. Windows: Disambiguate DOS style paths from SSH URLs. Windows: A rudimentary poll() emulation. Windows: Implement start_command(). ...
2008-06-26Update sample pre-commit hook to use "diff --check"Libravatar Junio C Hamano1-58/+6
Now "diff --check" can detect not just whitespace errors but also notices leftover conflict marker lines, we can use it in the sample pre-commit hook script. These days the object layer knows about the empty tree object without actually having one in the repository, so we can run the test even for the initial commit. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-26When installing, be prepared that template_dir may be relative.Libravatar Johannes Sixt1-4/+4
Since the Makefile in the template/ subdirectory is only used to install the templates, we do not simply pass down the setting of template_dir when it is relative, but construct the intended destination in a new variable: A relative template_dir is relative to gitexecdir. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
2008-06-25Fix use of "perl -i" on WindowsLibravatar Alex Riesen1-2/+2
The perldiag(1) has following to say about this: "Can't do inplace edit without backup" (F) You're on a system such as MS-DOS that gets confused if you try reading from a deleted (but still opened) file. You have to say -i.bak, or some such. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-24Ship sample hooks with .sample suffixLibravatar Junio C Hamano11-24/+23
We used to mark hooks we ship as samples by making them unexecutable, but some filesystems cannot tell what is executable and what is not. This makes it much more explicit. The hooks are suffixed with .sample (but now are made executable), so enabling it is still one step operation (instead of "chmod +x $hook", you would do "mv $hook.sample $hook") but now they won't get accidentally enabled on systems without executable bit. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-24pre-rebase hook updateLibravatar Junio C Hamano1-4/+23
This hook is what I have been using to manage topic branches in git.git, but have not been updated to the Real Thing for a while. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-21Fix prepare-commit-msg hook and replace in-place sedLibravatar Marcel Koeppen1-4/+4
The patterns to the case statement could never be matched, so the hook was a noop. This patch also replaces the non-portable use of in-place sed. Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-29Merge branch 'maint'Libravatar Junio C Hamano1-3/+3
* maint: templates/Makefile: don't depend on local umask setting Correct name of diff_flush() in API documentation Start preparing for 1.5.4.4 Conflicts: RelNotes
2008-02-28templates/Makefile: don't depend on local umask settingLibravatar Gerrit Pape1-3/+3
Don't take the local umask setting into account when installing the templates/* files and directories, running 'make install' with umask set to 077 resulted in template/* installed with permissions 700 and 600. The problem was discovered by Florian Zumbiehl, reported through http://bugs.debian.org/467518 Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-06git-commit: add a prepare-commit-msg hookLibravatar Paolo Bonzini2-0/+39
The prepare-commit-msg hook is run whenever a "fresh" commit message is prepared, just before it is shown in the editor (if it is). Its purpose is to modify the commit message in-place. It takes one to three parameters. The first is the name of the file that the commit log message. The second is the source of the commit message, and can be: "message" (if a -m or -F option was given); "template" (if a -t option was given or the configuration option commit.template is set); "merge" (if the commit is a merge or a .git/MERGE_MSG file exists); "squash" (if a .git/SQUASH_MSG file exists); or "commit", followed by a commit SHA1 as the third parameter (if a -c, -C or --amend option was given). If its exit status is non-zero, git-commit will abort. The hook is not suppressed by the --no-verify option, so it should not be used as a replacement for the pre-commit hook. The sample prepare-commit-msg comments out the `Conflicts:` part of a merge's commit message; other examples are commented out, including adding a Signed-off-by line at the bottom of the commit messsage, that the user can then edit or discard altogether. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-17Officially deprecate repo-config.Libravatar Junio C Hamano1-3/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-14Make default pre-commit hook less noisyLibravatar Jean-Luc Herren1-1/+1
This hook thought to have found a conflict marker any time it saw a 7-character combination of any of the characters '<>=' at the beginning of a line, whereas it should only look for the *same* character to appear repeatedly. Also, restrict it to match exactly 7 times, to avoid matching the underlining with '='-characters often used in documentation. Signed-off-by: Jean-Luc Herren <jlh@gmx.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-03install-sh from automake does not like -m without delimiting spaceLibravatar Robert Schiele1-1/+1
The install-sh script as shipped with automake requires a space between the -m switch and its argument. Since this is also the regular way of doing it with other install implementations this change inserts the missing space in all makefiles. Signed-off-by: Robert Schiele <rschiele@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-22Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Fix sample pre-commit hook
2007-11-22Fix sample pre-commit hookLibravatar Junio C Hamano1-1/+1
If the worktree happened to have a file called HEAD, "diff-index --cached HEAD" would complain about the ambiguity between revision and path. Avoid it by using an explicit "--" for disambiguation. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-08hooks--update: decline deleting tags or branches by default, add config optionsLibravatar Gerrit Pape1-2/+31
Decline deleting tags or branches through git push <remote> :<ref> by default, support config options hooks.allowdeletetag, hooks.allowdeletebranch to override this per repository. Before this patch the update hook interpreted deleting a tag, no matter if annotated or not, through git push <remote> :<tag> as unannotated tag, and declined it by default, but with an unappropriate error message: $ git push origin :atag deleting 'refs/tags/atag' *** The un-annotated tag, atag, is not allowed in this repository *** Use 'git tag [ -a | -s ]' for tags you want to propagate. ng refs/tags/atag hook declined error: hooks/update exited with error code 1 error: hook declined to update refs/tags/atag error: failed to push to 'monolith:/git/qm/test-repo' Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-08hooks--update: fix test for properly set up project description fileLibravatar Gerrit Pape1-2/+2
The update hook template intends to abort if the project description file hasn't been adjusted or is empty. This patch fixes the check for 'being adjusted'. Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-26hooks-pre-commit: use \t, rather than a literal TAB in regexpLibravatar Jim Meyering1-1/+1
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-13hooks--update: Explicitly check for all zeros for a deleted ref.Libravatar Alexandre Julliard1-1/+1
The previous check caused the hook to reject as unannotated any tag whose SHA1 starts with a zero. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>