| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This makes tar-tree a built-in. As an added bonus, you can now
say:
git tar-tree --remote=remote-repository <ent> [<base>]
This does not work with git-daemon yet, but should work with
localhost and git over ssh transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Separate object name errors from usage errors.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
buf is not used afterwards. The compiler optimized the dead store out
anyway, but let's clean the source, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Introduce tree-walk.[ch] and move "struct tree_desc" and
associated functions from various places.
Rename DIFF_FILE_CANON_MODE(mode) macro to canon_mode(mode) and
move it to cache.h. This macro returns the canonicalized
st_mode value in the host byte order for files, symlinks and
directories -- to be compared with a tree_desc entry.
create_ce_mode(mode) in cache.h is similar but is intended to be
used for index entries (so it does not work for directories) and
returns the value in the network byte order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* rs/tar-tree:
tar-tree: Use the prefix field of a tar header
tar-tree: Remove obsolete code
tar-tree: Use write_entry() to write the archive contents
tar-tree: Introduce write_entry()
tar-tree: Use SHA1 of root tree for the basedir
git-apply: safety fixes
Removed bogus "<snap>" identifier.
Clarify and expand some hook documentation.
commit-tree: check return value from write_sha1_file()
send-email: Identify author at the top when sending e-mail
Format tweaks for asciidoc.
|
|
... to store parts of the path, if possible. This allows us to avoid
writing extended headers in certain cases (long pathes can only be
split at '/' chars).
Also adds a file to the test repo with a 100 chars long directory name.
Even old versions of tar that don't understand POSIX extended headers
should be able to handle this testcase.
Btw.: The longest path in the kernel tree currently has 70 chars.
Together with a 30 chars long prefix this would already cross the
field limit of 100 chars.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
... and use it initially to write global extended header records.
Improvements compared to the old write_header():
- Uses a struct ustar_header instead of hardcoded offsets.
- Takes one struct strbuf as path argument instead of a (basedir,
prefix, name) tuple.
- Not only writes the tar header, but also the contents of the
file, if any.
- Does not write directly into the ring buffer. This allows the
code to be layed out more naturally, because there is no more
ordering constraint. Before we had to first finish writing the
extended header, now we can construct the extended and normal
headers in parallel.
- The typeflag parameter has been replaced by (reasonable) magic
values. path == NULL indicates an extended header, additionally
sha1 == NULL means it is a global extended header.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
... instead of the made-up "0".
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes sure that many commands that take refs on the command
line to honor core.warnambiguousrefs configuration. Earlier,
the commands affected by this patch did not read the
configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This fixes two bugs introduced when we switched to generic tree
traversal code.
(1) directory mode recorded silently became 0755, not 0777
(2) if passed a tree object (not a commit), it emitted an
alarming error message (but proceeded anyway).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It was open-coding getting the commit date from a commit.
Signed-off-by: Daniel Barkalow <barkalow@iabervon>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It was using an open-coded tree parser; use a struct tree instead.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Earlier commit 38ec15a973a1f075f0d94d130b0ef279562921cd forgot
to apply the same principle of not forcing go-w to the base
directory when specified.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We had errno==EINTR check after read(2)/write(2) sprinkled all
over the places, always doing continue. Consolidate them into
xread()/xwrite() wrapper routines.
Credits for suggestion goes to HPA -- bugs are mine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
These commands are converted to run from a subdirectory.
commit-tree convert-objects merge-base merge-index mktag
pack-objects pack-redundant prune-packed read-tree tar-tree
unpack-file unpack-objects update-server-info write-tree
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The archive generated with git-tar-tree had 0755 and 0644 mode bits.
This inconvenienced the extractor with umask 002 by robbing g+w bit
unconditionally. Just write it out with loose permissions bits and
let the umask of the extractor do its job.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
GCC's format __attribute__ is good for checking errors, especially
with -Wformat=2 parameter. This fixes most of the reported problems
against 2005-08-09 snapshot.
|
|
All usage strings are now declared as static const char [].
This is carried over from my old git-pb branch.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Here is a patch that fixes several gcc4 warnings about different signedness,
all between char and unsigned char. I tried to keep the patch minimal
so resertod to casts in three places.
Signed-off-by: Mika Kukkonen <mikukkon@iki.fi>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
write_trailer() writes the last 10k (a full block) of the tar archive.
write_if_needed() writes out a block *if* it is full and then sets
the offset to 0. In nine out of ten cases the messed up write_trailer()
function didn't manage to fill the block thus not writing anything at
all, truncating the archive. I was "lucky" to hit the other case and so
my testing ran OK.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
replace open-coded variants of get_record().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix various things that sparse complains about:
- use NULL instead of 0
- make sure we declare everything properly, or mark it static
- use proper function declarations ("fn(void)" instead of "fn()")
Sparse is always right.
|
|
Fixes all in-code names that leaved during "big name change".
Signed-off-by: Alexey Nezhdanov <snake@penza-gsm.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
- Raw hashes should be unsigned char.
- String functions want signed char.
- Hash and compress functions want unsigned char.
Signed-off By: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Some commands initialize sha1_file_directory by hand. There is no
need to do so; sha1_file.c knows how to handle it.
The next patch will remove the variable altogether.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add symlink support to git-tar-tree.
|
|
Pass pointer to filecontents to write_header() and pass pointer
to filecontents, its size and some flags to write_exntended_header().
These parameters are not used, yet. They are added in preparation
to symlink support.
|
|
Introduce append_extended_header_prefix(), extended_header_len()
and append_extended_header(). These are helper functions that
make it easier to handle multiple entries in a pax extended
header. append_log() is no longer needed and can go away.
|
|
Add TYPEFLAG_ constants.
|
|
Add get_record() which returns a pointer to the next record in the block.
|
|
This allows the programs to use various simplified versions of
the SHA1 names, eg just say "HEAD" for the SHA1 pointed to by
the .git/HEAD file etc.
For example, this commit has been done with
git-commit-tree $(git-write-tree) -p HEAD
instead of the traditional "$(cat .git/HEAD)" syntax.
|
|
Write commit ID to global extended pax header at the beginning of the tar
file, if possible. get-tar-commit-id.c is an example program to get the
ID back out of such a tar archive.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch replaces the usage of read_tree_with_tree_or_commit_sha1()
with read_object_with_reference() in tar-tree. As a result the code
that tries to figure out the commit time doesn't need to open the commit
object 'by hand' any more.
Signed-off-by: Rene Scharfe <lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This is an improved version of tar-tree, a streaming archive creator for
GIT. The major added feature is blocking; all write(2) calls now have a
size of 10240, just as GNU tar (and tape drives) likes them. The
buffering overhead does not seem to degrade performance because most
files in the repositories I tested this with are smaller than 10KB, so
we need fewer system calls.
File names are still restricted to 500 bytes and the archive format
currently only allows for files up to 8GB. Both restrictions can be
lifted if need be with more pax extended headers.
The archive format used is the pax interchange format, i.e. POSIX tar
format. It can be read by (and created with) GNU tar. If I read the
specs correctly tar-tree should now be standards compliant (modulo
bugs).
Because it streams the archive (think ls-tree merged with cat-file),
tar-tree doesn't need to create any temporary files. That makes it
quite fast.
It accepts tree IDs and commit IDs as first parameter. In the latter
case tar-tree tries to get the commit date out of the committer line.
Else all files in the archive are time-stamped with the current time.
An optional second parameter is used as a path prefix for all files in
the archive. Example:
$ tar-tree a2755a80f40e5794ddc20e00f781af9d6320fafb \
linux-2.6.12-rc3 | bzip9 -9 > linux-2.6.12-rc3.tar.bz2
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
Junio C Hamano
Dmitry V. Levin
Peter Eriksen
Rene Scharfe
Linus Torvalds
Daniel Barkalow
Timo Sirainen
Petr Baudis
Mika Kukkonen
Linus Torvalds
Alexey Nezhdanov
Brian Gerst
Petr Baudis