| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* gb/formatpatch-autonbr:
format-patch: autonumber by default
|
|
* sp/describe-lwtag:
describe: Make --tags and --all match lightweight tags more often
|
|
* ae/preservemerge:
rebase: Support preserving merges in non-interactive mode
|
|
* mv/merge-noff:
builtin-commit: use reduce_heads() only when appropriate
Conflicts:
builtin-commit.c
t/t7600-merge.sh
|
|
* ns/rebase-noverify:
rebase: Document --no-verify option to bypass pre-rebase hook
rebase --no-verify
|
|
format-patch is most commonly used for multiple patches at once when
sending a patchset, in which case we want to number the patches; on
the other hand, single patches are not usually expected to be
numbered.
In other words, the typical behavior expected from format-patch is the
one obtained by enabling autonumber, so we set it to be the default.
Users that want to disable numbering for a particular patchset can do
so with the existing -N command-line switch. Users that want to
change the default behavior can use the format.numbering config key.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Test-updates-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the caller supplies --tags they want the lightweight, unannotated
tags to be searched for a match. If a lightweight tag is closer
in the history, it should be matched, even if an annotated tag is
reachable further back in the commit chain.
The same applies with --all when matching any other type of ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-By: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
|
|
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Since the newline is not removed from lines before pattern matching, a
pattern cannot match to the end of the line using the '$' operator without
using an additional operator which will indirectly match the '\n' character.
Introduce a test which should pass, but which does not due to this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test used the non-zero exit status of 'git diff' to indicate that a
negated funcname pattern, when placed last, was correctly rejected.
The problem with this is that 'git diff' always returns non-zero if it
finds differences in the files it is comparing, and the files must
contain differences in order to trigger the funcname pattern codepath.
Instead of checking for non-zero exit status, make sure the expected
error message is printed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
test-lib: fix broken printf
git apply --directory broken for new files
|
|
b8eecafd888d219633f4c29e8b6a90fc21a46dfd introduced usage of
printf without a format string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
According to the message of commit 0fe7c1de16f71312e6adac4b85bddf0d62a47168,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Since dbf5e1e9, the '--no-validate' option is a Getopt::Long boolean
option. The '--no-' prefix (as in --no-validate) for boolean options
is not supported in Getopt::Long version 2.32 which was released with
Perl 5.8.0. This version only supports '--no' as in '--novalidate'.
More recent versions of Getopt::Long, such as version 2.34, support
either prefix. So use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
We carefully verify that the input to git-apply is sane,
including cross-checking that the filenames we see in "+++"
headers match what was provided on the command line of "diff
--git". When --directory is used, however, we ended up
comparing the unadorned name to one with the prepended root,
causing us to complain about a mismatch.
We simply need to prepend the root directory, if any, when
pulling the name out of the git header.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
rebase -i: do not fail when there is no commit to cherry-pick
test-lib: fix color reset in say_color()
fix pread()'s short read in index-pack
Conflicts:
csum-file.c
|
|
In case there is no commit to apply (for example because you rebase to
upstream and all your local patches have been applied there), do not
fail. The non-interactive rebase already behaves that way.
Do this by introducing a new command, "noop", which is substituted for
an empty commit list, so that deleting the commit list can still abort
as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When executing a single test with colors enabled, the cursor was not set
back to the previous one, and you had to hit an extra enter to get it
back.
Work around this problem by calling 'tput sgr0' before printing the
final newline.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* dm/svn-branch:
Add git-svn branch to allow branch creation in SVN repositories
|
|
* jc/add-ita:
git-add --intent-to-add (-N)
|
|
* mv/merge-refresh:
builtin-merge: refresh the index before calling a strategy
|
|
* maint:
Do not use errno when pread() returns 0
git init: --bare/--shared overrides system/global config
git-push.txt: Describe --repo option in more detail
git rm: refresh index before up-to-date check
Fix a few typos in relnotes
|
|
If core.bare or core.sharedRepository are set in /etc/gitconfig or
~/.gitconfig, then 'git init' will read the values when constructing a
new config file; reading them, however, will override the values
specified on the command line. In the case of --bare, this ends up
causing a segfault, without the repository being properly initialised;
in the case of --shared, the permissions are set according to the
existing config settings, not what was specified on the command line.
This fix saves any specified values for --bare and --shared prior to
reading existing config settings, and restores them after reading but
before writing the new config file. core.bare is ignored in all
situations, while core.sharedRepository will only be used if --shared
is not specified to git init.
Also includes testcases which use a specified global config file
override, demonstrating the former failure scenario.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Since "git rm" is supposed to be porcelain, we should convince it to
be user friendly by refreshing the index itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
It is sometimes desirable to disable the safety net of pre-rebase hook
when the user knows what he is doing (for example, when the original
changes on the branch have not been shown to the public yet).
This teaches --no-verify option to git-rebase, which is similar to the way
pre-commit hook is bypassed by git-commit.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
[ew: fixed a warning to stderr causing t9108 to fail]
Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
Update release notes for 1.6.0.3
Teach rebase -i to honor pre-rebase hook
docs: describe pre-rebase hook
do not segfault if make_cache_entry failed
make prefix_path() never return NULL
fix bogus "diff --git" header from "diff --no-index"
Fix fetch/clone --quiet when stdout is connected
builtin-blame: Fix blame -C -C with submodules.
bash: remove fetch, push, pull dashed form leftovers
Conflicts:
diff.c
|
|
The original git-rebase honored pre-rebase hook so that public branches
can be protected from getting rebased, but rebase --interactive ignored
the hook entirely. This fixes it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When "git diff --no-index" is given an absolute pathname, it
would generate a diff header with the absolute path
prepended by the prefix, like:
diff --git a/dev/null b/foo
Not only is this nonsensical, and not only does it violate
the description of diffs given in git-diff(1), but it would
produce broken binary diffs. Unlike text diffs, the binary
diffs don't contain the filenames anywhere else, and so "git
apply" relies on this header to figure out the filename.
This patch just refuses to use an invalid name for anything
visible in the diff.
Now, this fixes the "git diff --no-index --binary a
/dev/null" kind of case (and we'll end up using "a" as the
basename), but some other insane cases are impossible to
handle. If you do
git diff --no-index --binary a /bin/echo
you'll still get a patch like
diff --git a/a b/bin/echo
old mode 100644
new mode 100755
index ...
and "git apply" will refuse to apply it for a couple of
reasons, and the diff is simply bogus.
And that, btw, is no longer a bug, I think. It's impossible
to know whethe the user meant for the patch to be a rename
or not. And as such, refusing to apply it because you don't
know what name you should use is probably _exactly_ the
right thing to do!
Original problem reported by Imre Deak. Test script and problem
description by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Since commit 6bb6b034 (builtin-commit: use commit_tree(), 2008-09-10),
builtin-commit performs a reduce_heads() unconditionally. However,
it's not always needed, and in some cases even harmful.
reduce_heads() is not needed for the initial commit or for an
"ordinary" commit, because they don't have any or have only one
parent, respectively.
reduce_heads() must be avoided when 'git commit' is run after a 'git
merge --no-ff --no-commit', otherwise it will turn the
non-fast-forward merge into fast-forward. For the same reason,
reduce_heads() must be avoided when amending such a merge commit.
To resolve this issue, 'git merge' will write info about whether
fast-forward is allowed or not to $GIT_DIR/MERGE_MODE. Based on this
info, 'git commit' will only perform reduce_heads() when it's
committing a merge and fast-forward is enabled.
Also add test cases to ensure that non-fast-forward merges are
committed and amended properly.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In case a file is touched but has no real changes then we just have to
update the index and should not error out.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This testcase ensures that upstream changes to submodule properties
can be updated using the sync subcommand. This particular test
changes the submodule URL upstream and uses the sync command to update
an existing checkout.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
gitweb: Add path_info tests to t/t9500-gitweb-standalone-no-errors.sh
gitweb: Fix two 'uninitialized value' warnings in git_tree()
Solaris: Use OLD_ICONV to avoid compile warnings
gitweb: remove PATH_INFO from $my_url and $my_uri
|
|
Note that those tests only check that there are no errors nor
warnings from Perl; they do not check for example if gitweb doesn't
use ARRAY(0x8e3cc20) instead of correct value in links, etc.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
As a result of implementation details, 'git rebase' could
previously only preserve merges in interactive mode. That
limitation was hard for users to understand and awkward to
explain.
This patch works around it by running the interactive rebase
helper git-rebase--interactive with GIT_EDITOR set to ':'
when the user passes "-p" but not "-i" to the rebase command.
The effect is that the interactive rebase helper is used but
the user never sees an editor.
The test-case included in this patch was originally written
by Stephen Habermann <stephen@exigencecorp.com>, but has
been extensively modified since its creation.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-svn: call 'fatal' correctly in set-tree
Replace svn.foo.org with svn.example.com in git-svn docs (RFC 2606)
t0024: add executable permission
|
|
We try to avoid using the "-q" or "-e" options, as they are
largely useless, as explained in aadbe44f.
There is one exception for "-e" here, which is in t7701 used
to produce an "or" of patterns. This can be rewritten as an
egrep pattern.
This patch also removes use of "grep -F" in favor of the
more widely available "fgrep".
[sp: Tested on AIX 5.3 by Mike Ralphson,
Tested on MinGW by Johannes Sixt]
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* bc/master-diff-hunk-header-fix:
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
t4018-diff-funcname: test syntax of builtin xfuncname patterns
t4018-diff-funcname: test syntax of builtin xfuncname patterns
make "git remote" report multiple URLs
diff hunk pattern: fix misconverted "\{" tex macro introducers
diff: fix "multiple regexp" semantics to find hunk header comment
diff: use extended regexp to find hunk headers
diff: use extended regexp to find hunk headers
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Conflicts:
builtin-merge-recursive.c
t/t7201-co.sh
xdiff-interface.h
|
|
* maint: (41 commits)
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
Remove empty directories in recursive merge
Documentation: clarify the details of overriding LESS via core.pager
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
builtin-prune.c: prune temporary packs in <object_dir>/pack directory
Do not perform cross-directory renames when creating packs
Use dashless git commands in setgitperms.perl
git-remote: do not use user input in a printf format string
make "git remote" report multiple URLs
Start draft release notes for 1.6.0.3
git-repack uses --no-repack-object, not --no-repack-delta.
...
Conflicts:
RelNotes
|
|
* bc/maint-diff-hunk-header-fix:
t4018-diff-funcname: test syntax of builtin xfuncname patterns
diff hunk pattern: fix misconverted "\{" tex macro introducers
diff: use extended regexp to find hunk headers
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Conflicts:
Documentation/gitattributes.txt
|
|
* jc/better-conflict-resolution:
Fix AsciiDoc errors in merge documentation
git-merge documentation: describe how conflict is presented
checkout --conflict=<style>: recreate merge in a non-default style
checkout -m: recreate merge when checking out of unmerged index
git-merge-recursive: learn to honor merge.conflictstyle
merge.conflictstyle: choose between "merge" and "diff3 -m" styles
rerere: understand "diff3 -m" style conflicts with the original
rerere.c: use symbolic constants to keep track of parsing states
xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less
xmerge.c: minimum readability fixups
xdiff-merge: optionally show conflicts in "diff3 -m" style
xdl_fill_merge_buffer(): separate out a too deeply nested function
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
Conflicts:
Documentation/git-checkout.txt
builtin-checkout.c
builtin-merge-recursive.c
t/t7201-co.sh
|
|
* maint:
Remove empty directories in recursive merge
Documentation: clarify the details of overriding LESS via core.pager
Conflicts:
builtin-merge-recursive.c
|
|
The code was actually supposed to do that, but was accidentally broken.
Noticed by Anders Melchiorsen.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* mv/merge-recursive:
builtin-merge: release the lockfile in try_merge_strategy()
merge-recursive: get rid of virtual_id
merge-recursive: move current_{file,directory}_set to struct merge_options
merge-recursive: move the global obuf to struct merge_options
merge-recursive: get rid of the index_only global variable
merge-recursive: move call_depth to struct merge_options
cherry-pick/revert: make direct internal call to merge_tree()
builtin-merge: avoid run_command_v_opt() for recursive and subtree
merge-recursive: introduce merge_options
merge-recursive.c: Add more generic merge_recursive_generic()
Split out merge_recursive() to merge-recursive.c
|
Junio C Hamano
Brian Gernhardt
Shawn O. Pearce
Matt McCutchen
Brandon Casey
Brandon Casey
Miklos Vajna
Jeff King
Johannes Schindelin
Deskin Miller
Nanako Shiraishi
Florian Ragwitz
Linus Torvalds
David Aguilar
Jakub Narebski
Andreas Ericsson
SZEDER Gábor
Alex Riesen