| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A new submodule helper "git submodule embedgitdirs" to make it
easier to move embedded .git/ directory for submodules in a
superproject to .git/modules/ (and point the latter with the former
that is turned into a "gitdir:" file) has been added.
* sb/submodule-embed-gitdir:
worktree: initialize return value for submodule_uses_worktrees
submodule: add absorb-git-dir function
move connect_work_tree_and_git_dir to dir.h
worktree: check if a submodule uses worktrees
test-lib-functions.sh: teach test_commit -C <dir>
submodule helper: support super prefix
submodule: use absolute path for computing relative path connecting
|
|
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
|
|
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* jc/compression-config:
compression: unify pack.compression configuration parsing
|
|
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
|
|
Update GitLFS integration with "git p4".
* ls/p4-lfs:
git-p4: add diff/merge properties to .gitattributes for GitLFS files
|
|
"git shortlog" learned "--committer" option to group commits by
committer, instead of author.
* lt/shortlog-by-committer:
t4201: make tests work with and without the MINGW prerequiste
shortlog: test and document --committer option
shortlog: group by committer information
|
|
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
|
|
"git p4" misbehaved when swapping a directory and a symbolic link.
* ld/p4-compare-dir-vs-symlink:
git-p4: avoid crash adding symlinked directory
|
|
Doc update.
* ls/filter-process:
t0021: fix flaky test
docs: warn about possible '=' in clean/smudge filter process values
|
|
Finer-grained control of what protocols are allowed for transports
during clone/fetch/push have been enabled via a new configuration
mechanism.
* bw/transport-protocol-policy:
http: respect protocol.*.allow=user for http-alternates
transport: add from_user parameter to is_transport_allowed
http: create function to get curl allowed protocols
transport: add protocol policy config option
http: always warn if libcurl version is too old
lib-proto-disable: variable name fix
|
|
"git merge --continue" has been added as a synonym to "git commit"
to conclude a merge that has stopped due to conflicts.
* cp/merge-continue:
merge: mark usage error strings for translation
merge: ensure '--abort' option takes no arguments
completion: add --continue option for merge
merge: add '--continue' option as a synonym for 'git commit'
|
|
Porcelain scripts written in Perl are getting internationalized.
* va/i18n-perl-scripts:
i18n: difftool: mark warnings for translation
i18n: send-email: mark composing message for translation
i18n: send-email: mark string with interpolation for translation
i18n: send-email: mark warnings and errors for translation
i18n: send-email: mark strings for translation
i18n: add--interactive: mark status words for translation
i18n: add--interactive: remove %patch_modes entries
i18n: add--interactive: mark edit_hunk_manually message for translation
i18n: add--interactive: i18n of help_patch_cmd
i18n: add--interactive: mark patch prompt for translation
i18n: add--interactive: mark plural strings
i18n: clean.c: match string with git-add--interactive.perl
i18n: add--interactive: mark strings with interpolation for translation
i18n: add--interactive: mark simple here-documents for translation
i18n: add--interactive: mark strings for translation
Git.pm: add subroutines for commenting lines
|
|
Minor code clean-up.
* sb/submodule-config-cleanup:
submodule-config: clarify parsing of null_sha1 element
submodule-config: rename commit_sha1 to treeish_name
submodule config: inline config_from_{name, path}
|
|
A lazy "git push" without refspec did not internally use a fully
specified refspec to perform 'current', 'simple', or 'upstream'
push, causing unnecessary "ambiguous ref" errors.
* jc/push-default-explicit:
push: test pushing ambiguously named branches
push: do not use potentially ambiguous default refspec
|
|
"git index-pack --stdin" needs an access to an existing repository,
but "git index-pack file.pack" to generate an .idx file that
corresponds to a packfile does not.
* jk/index-pack-wo-repo-from-stdin:
index-pack: skip collision check when not in repository
t: use nongit() function where applicable
index-pack: complain when --stdin is used outside of a repo
t5000: extract nongit function to test-lib-functions.sh
|
|
A recent update to receive-pack to make it easier to drop garbage
objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot
have a pathname with a colon in it (no surprise!), and this in turn
made it impossible to push into a repository at such a path. This
has been fixed by introducing a quoting mechanism used when
appending such a path to the colon-separated list.
* jk/quote-env-path-list-component:
t5615-alternate-env: double-quotes in file names do not work on Windows
t5547-push-quarantine: run the path separator test on Windows, too
tmp-objdir: quote paths we add to alternates
alternates: accept double-quoted paths
|
|
"git clone --reference $there --recurse-submodules $super" has been
taught to guess repositories usable as references for submodules of
$super that are embedded in $there while making a clone of the
superproject borrow objects from $there; extend the mechanism to
also allow submodules of these submodules to borrow repositories
embedded in these clones of the submodules embedded in the clone of
the superproject.
* vs/submodule-clone-nested-submodules-alternates:
submodule--helper: set alternateLocation for cloned submodules
|
|
Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back
to where cherry-pick started while picking multiple changes, when
the cherry-pick stopped to ask for help from the user, and the user
did "git reset --hard" to a different commit in order to re-attempt
the operation.
* sb/sequencer-abort-safety:
Revert "sequencer: remove useless get_dir() function"
sequencer: remove useless get_dir() function
sequencer: make sequencer abort safer
t3510: test that cherry-pick --abort does not unsafely change HEAD
am: change safe_to_abort()'s not rewinding error into a warning
am: fix filename in safe_to_abort() error message
|
|
Protect a recently added test case with !MINGW.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In typical uses of fast-import, trees are inherited from a parent
commit. In that case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = <tree structure loaded from $some_sha1>
However, when trees are imported, rather than inherited, that is not the
case. One can import a tree with a filemodify command, replacing the
root tree object.
e.g.
"M 040000 $some_sha1 \n"
In this case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = NULL
When adding new notes with the notemodify command, do_change_note_fanout
is called to get a notes count, and to do so, it loops over the
tree_entry->tree, but doesn't do anything when the tree is NULL.
In the latter case above, it means do_change_note_fanout thinks the tree
contains no notes, and new notes are added with no fanout.
Interestingly, do_change_note_fanout does check whether subdirectories
have a NULL .tree, in which case it uses load_tree(). Which means the
right behaviour happens when using the filemodify command to import
subdirectories.
This change makes do_change_note_fanount call load_tree() whenever the
tree_entry it is given has no tree loaded, making all cases handled
equally.
Signed-off-by: Mike Hommey <mh@glandium.org>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure the tests do not depend on the result of the previous
tests. With MINGW prerequisite satisfied, a "reset to original and
rebuild" in an earlier test was skipped, resulting in different
history being tested with this and the next tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `git lfs track` command generates a .gitattributes file with diff
and merge properties [1]. Set the same .gitattributes format for files
tracked with GitLFS in git-p4.
[1] https://github.com/git-lfs/git-lfs/blob/v1.5.3/commands/command_track.go#L121
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* sb/t3600-cleanup:
t3600: slightly modernize style
t3600: remove useless redirect
|
|
"git pull --rebase", when there is no new commits on our side since
we forked from the upstream, should be able to fast-forward without
invoking "git rebase", but it didn't.
* jc/pull-rebase-ff:
pull: fast-forward "pull --rebase=true"
|
|
"git p4" didn't interact with the internal of .git directory
correctly in the modern "git-worktree"-enabled world.
* ld/p4-worktree:
git-p4: support git worktrees
|
|
Git 2.11 had a minor regression in "merge --ff-only" that competed
with another process that simultanously attempted to update the
index. We used to explain what went wrong with an error message,
but the new code silently failed. The error message has been
resurrected.
* jc/lock-report-on-error:
lockfile: LOCK_REPORT_ON_ERROR
hold_locked_index(): align error handling with hold_lockfile_for_update()
wt-status: implement opportunisitc index update correctly
|
|
"git rebase" learned "--quit" option, which allows a user to
remove the metadata left by an earlier "git rebase" that was
manually aborted without using "git rebase --abort".
* nd/rebase-forget:
rebase: add --quit to cleanup rebase, leave everything else untouched
|
|
In addition to %(subject), %(body), "log --pretty=format:..."
learned a new placeholder %(trailers).
* jk/trailers-placeholder-in-pretty:
ref-filter: add support to display trailers as part of contents
pretty: add %(trailers) format for displaying trailers of a commit message
|
|
"git commit --allow-empty --only" (no pathspec) with dirty index
ought to be an acceptable way to create a new commit that does not
change any paths, but it was forbidden, perhaps because nobody
needed it so far.
* ak/commit-only-allow-empty:
commit: remove 'Clever' message for --only --amend
commit: make --only --allow-empty work without paths
|
|
"git difftool --dir-diff" had a minor regression when started from
a subdirectory, which has been fixed.
* da/difftool-dir-diff-fix:
difftool: fix dir-diff index creation when in a subdirectory
|
|
"git diff --no-index" did not take "--no-abbrev" option.
* jb/diff-no-index-no-abbrev:
diff: handle --no-abbrev in no-index case
|
|
When diff.renames configuration is on (and with Git 2.9 and later,
it is enabled by default, which made it worse), "git stash"
misbehaved if a file is removed and another file with a very
similar content is added.
* jk/stash-disable-renames-internally:
stash: prefer plumbing over git-diff
|
|
Transport with dumb http can be fooled into following foreign URLs
that the end user does not intend to, especially with the server
side redirects and http-alternates mechanism, which can lead to
security issues. Tighten the redirection and make it more obvious
to the end user when it happens.
* jk/http-walker-limit-redirect-2.9:
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
|
|
"git branch --list" and friends learned "--ignore-case" option to
optionally sort branches and tags case insensitively.
* nd/for-each-ref-ignore-case:
tag, branch, for-each-ref: add --ignore-case for sorting and filtering
|
|
* sb/unpack-trees-grammofix:
unpack-trees: fix grammar for untracked files in directories
|
|
* ls/t0021-fixup:
t0021: minor filter process test cleanup
|
|
Fix a corner case in merge-recursive regression that crept in
during 2.10 development cycle.
* jc/renormalize-merge-kill-safer-crlf:
convert: git cherry-pick -Xrenormalize did not work
merge-recursive: handle NULL in add_cacheinfo() correctly
cherry-pick: demonstrate a segmentation fault
|
|
Commands that operate on a log message and add lines to the trailer
blocks, such as "format-patch -s", "cherry-pick (-x|-s)", and
"commit -s", have been taught to use the logic of and share the
code with "git interpret-trailer".
* jt/use-trailer-api-in-commands:
sequencer: use trailer's trailer layout
trailer: have function to describe trailer layout
trailer: avoid unnecessary splitting on lines
commit: make ignore_non_trailer take buf/len
trailer: be stricter in parsing separators
|
|
When importing from multiple perforce paths - we may attempt to
import a changelist that contains files from two (or more) of these
depot paths. Currently, this results in multiple git commits - one
containing the changes, and the other(s) as empty commit(s). This
behavior was introduced in commit 1f90a64891 ("git-p4: reduce number
of server queries for fetches", 2015-12-19).
Reproduction Steps:
1. Have a git repo cloned from a perforce repo using multiple
depot paths (e.g. //depot/foo and //depot/bar).
2. Submit a single change to the perforce repo that makes changes
in both //depot/foo and //depot/bar.
3. Run "git p4 sync" to sync the change from #2.
Change is synced as multiple commits, one for each depot path that
was affected.
Using a set, instead of a list inside p4ChangesForPaths() ensures
that each changelist is unique to the returned list, and therefore
only a single commit is generated for each changelist.
Reported-by: James Farwell <jfarwell@vmware.com>
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When submitting to P4, if git-p4 came across a symlinked
directory, then during the generation of the submit diff, it would
try to open it as a normal file and fail.
Spot symlinks (of any type) and output a description of the symlink
instead.
Add a test case.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t0021.15 creates files, adds them to the index, and commits them. All
this usually happens in a test run within the same second and Git cannot
know if the files have been changed between `add` and `commit`. Thus,
Git has to run the clean filter in both operations. Sometimes these
invocations spread over two different seconds and Git can infer that the
files were not changed between `add` and `commit` based on their
modification timestamp. The test would fail as it expects the filter
invocation. Remove this expectation to make the test stable.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" LFS support was broken when LFS stores an empty blob.
* ls/p4-empty-file-on-lfs:
git-p4: fix empty file processing for large file system backend GitLFS
|
|
* ld/p4-update-shelve:
git-p4: support updating an existing shelved changelist
|
|
* vk/p4-submit-shelve:
git-p4: allow submit to create shelved changelists.
|
|
Test code clean-up.
* ak/lazy-prereq-mktemp:
t7610: clean up foo.XXXXXX tmpdir
|
|
The output from "git worktree list" was made in readdir() order,
and was unstable.
* nd/worktree-list-fixup:
worktree list: keep the list sorted
worktree.c: get_worktrees() takes a new flag argument
get_worktrees() must return main worktree as first item even on error
worktree: reorder an if statement
worktree.c: zero new 'struct worktree' on allocation
|
|
"git push --dry-run --recurse-submodule=on-demand" wasn't
"--dry-run" in the submodules.
* bw/push-dry-run:
push: fix --dry-run to not push submodules
push: --dry-run updates submodules when --recurse-submodules=on-demand
|
|
An empty directory in a working tree that can simply be nuked used
to interfere while merging or cherry-picking a change to create a
submodule directory there, which has been fixed..
* dt/empty-submodule-in-merge:
submodules: allow empty working-tree dirs in merge/cherry-pick
|
|
"git rev-parse --symbolic" failed with a more recent notation like
"HEAD^-1" and "HEAD^!".
* jk/rev-parse-symbolic-parents-fix:
rev-parse: fix parent shorthands with --symbolic
|
|
This puts the final touches on the feature added by
fbfda15fb8 (shortlog: group by committer information,
2016-10-11).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Johannes Sixt
Mike Hommey
Lars Schneider
George Vanburgh
Luke Diamand
Jeff King