| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
rename detection works by trying to pair all file deletions (or
"sources") with all file additions (or "destinations"), checking
similarity, and then marking the sufficiently similar ones as renames.
This can be expensive if there are many sources and destinations on a
given side of history as it results in an N x M comparison matrix.
However, there are many cases where we can compute in advance that
detecting renames for some of the sources provides no useful information
and thus that we can exclude those sources from the matrix.
To see why, first note that the merge machinery uses detected renames in
two ways:
* directory rename detection: when one side of history renames a
directory, and the other side of history adds new files to that
directory, we want to be able to warn the user about the need to
chose whether those new files stay in the old directory or move
to the new one.
* three-way content merging: in order to do three-way content merging
of files, we need three different file versions. If one side of
history renamed a file, then some of the content for the file is
found under a different path than in the merge base or on the
other side of history.
Add a simple testcase showing the two kinds of reasons renames are
relevant; it's a testcase that will only pass if we detect both kinds of
needed renames.
Other than the testcase added above, this commit concentrates just on
the three-way content merging; it will punt and mark all sources as
needed for directory rename detection, and leave it to future commits to
narrow that down more.
The point of three-way content merging is to reconcile changes made on
*both* sides of history. What if the file wasn't modified on both
sides? There are two possibilities:
* If it wasn't modified on the renamed side:
-> then we get to do exact rename detection, which is cheap.
* If it wasn't modified on the unrenamed side:
-> then detection of a rename for that source file is irrelevant
That latter claim might be surprising at first, so let's walk through a
case to show why rename detection for that source file is irrelevant.
Let's use two filenames, old.c & new.c, with the following abbreviated
object ids (and where the value '000000' is used to denote that the file
is missing in that commit):
old.c new.c
MERGE_BASE: 01d01d 000000
MERGE_SIDE1: 01d01d 000000
MERGE_SIDE2: 000000 5e1ec7
If the rename *isn't* detected:
then old.c looks like it was unmodified on one side and deleted on
the other and should thus be removed. new.c looks like a new file we
should keep as-is.
If the rename *is* detected:
then a three-way content merge is done. Since the version of the
file in MERGE_BASE and MERGE_SIDE1 are identical, the three-way merge
will produce exactly the version of the file whose abbreviated
object id is 5e1ec7. It will record that file at the path new.c,
while removing old.c from the directory.
Note that these two results are identical -- a single file named 'new.c'
with object id 5e1ec7. In other words, it doesn't matter if the rename
is detected in the case where the file is unmodified on the unrenamed
side.
Use this information to compute whether we need rename detection for
each source created in add_pair().
It's probably worth noting that there used to be a few other edge or
corner cases besides three-way content merges and directory rename
detection where lack of rename detection could have affected the result,
but those cases actually highlighted where conflict resolution methods
were not consistent with each other. Fixing those inconsistencies were
thus critically important to enabling this optimization. That work
involved the following:
* bringing consistency to add/add, rename/add, and rename/rename
conflict types, as done back in the topic merged at commit
ac193e0e0a ("Merge branch 'en/merge-path-collision'", 2019-01-04),
and further extended in commits 2a7c16c980 ("t6422, t6426: be more
flexible for add/add conflicts involving renames", 2020-08-10) and
e8eb99d4a6 ("t642[23]: be more flexible for add/add conflicts
involving pair renames", 2020-08-10)
* making rename/delete more consistent with modify/delete
as done in commits 1f3c9ba707 ("t6425: be more flexible with
rename/delete conflict messages", 2020-08-10) and 727c75b23f
("t6404, t6423: expect improved rename/delete handling in ort
backend", 2020-10-26)
Since the set of relevant_sources we compute has not yet been narrowed
down for directory rename detection, we do not pass it to
diffcore_rename_extended() yet. That will be done after subsequent
commits narrow down the list of relevant_sources needed for directory
rename detection reasons.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make use of the new find_basename_matches() function added in the last
two patches, to find renames more rapidly in cases where we can match up
files based on basenames. As a quick reminder (see the last two commit
messages for more details), this means for example that
docs/extensions.txt and docs/config/extensions.txt are considered likely
renames if there are no remaining 'extensions.txt' files elsewhere among
the added and deleted files, and if a similarity check confirms they are
similar, then they are marked as a rename without looking for a better
similarity match among other files. This is a behavioral change, as
covered in more detail in the previous commit message.
We do not use this heuristic together with either break or copy
detection. The point of break detection is to say that filename
similarity does not imply file content similarity, and we only want to
know about file content similarity. The point of copy detection is to
use more resources to check for additional similarities, while this is
an optimization that uses far less resources but which might also result
in finding slightly fewer similarities. So the idea behind this
optimization goes against both of those features, and will be turned off
for both.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 13.815 s ± 0.062 s 13.294 s ± 0.103 s
mega-renames: 1799.937 s ± 0.493 s 187.248 s ± 0.882 s
just-one-mega: 51.289 s ± 0.019 s 5.557 s ± 0.017 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a simple test where a removed file is similar to two different added
files; one of them has the same basename, and the other has a slightly
higher content similarity. In the current test, content similarity is
weighted higher than filename similarity.
Subsequent commits will add a new rule that weighs a mixture of filename
similarity and content similarity in a manner that will change the
outcome of this testcase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
|
|
Update support for invalid UTF-8 in PCRE2.
* ab/grep-pcre-invalid-utf8:
grep/pcre2: better support invalid UTF-8 haystacks
grep/pcre2 tests: don't rely on invalid UTF-8 data test
|
|
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
|
|
Some pretty-format specifiers do not need the data in commit object
(e.g. "%H"), but we were over-eager to load and parse it, which has
been made even lazier.
* jk/pretty-lazy-load-commit:
pretty: lazy-load commit data when expanding user-format
|
|
Cleaning various codepaths up.
* ds/more-index-cleanups:
t1092: test interesting sparse-checkout scenarios
test-lib: test_region looks for trace2 regions
sparse-checkout: load sparse-checkout patterns
name-hash: use trace2 regions for init
repository: add repo reference to index_state
fsmonitor: de-duplicate BUG()s around dirty bits
cache-tree: extract subtree_pos()
cache-tree: simplify verify_cache() prototype
cache-tree: clean up cache_tree_update()
|
|
`git worktree list` now annotates worktrees as prunable, shows
locked and prunable attributes in --porcelain mode, and gained
a --verbose option.
* rs/worktree-list-verbose:
worktree: teach `list` verbose mode
worktree: teach `list` to annotate prunable worktree
worktree: teach `list --porcelain` to annotate locked worktree
t2402: ensure locked worktree is properly cleaned up
worktree: teach worktree_lock_reason() to gently handle main worktree
worktree: teach worktree to lazy-load "prunable" reason
worktree: libify should_prune_worktree()
|
|
When "git rebase -i" processes "fixup" insn, there is no reason to
clean up the commit log message, but we did the usual stripspace
processing. This has been corrected.
* js/rebase-i-commit-cleanup-fix:
rebase -i: do leave commit message intact in fixup! chains
|
|
Code clean-up.
* jk/t0000-cleanups:
t0000: consistently use single quotes for outer tests
t0000: run cleaning test inside sub-test
t0000: run prereq tests inside sub-test
t0000: keep clean-up tests together
|
|
Test fix.
* sg/t7800-difftool-robustify:
t7800-difftool: don't accidentally match tmp dirs
|
|
Test framework fix.
* sg/test-stress-jobs:
test-lib: prevent '--stress-jobs=X' from being ignored
|
|
Test fix.
* pb/blame-funcname-range-userdiff:
annotate-tests: quote variable expansions containing path names
|
|
A perf script was made more portable.
* jk/p5303-sed-portability-fix:
p5303: avoid sed GNU-ism
|
|
"git ls-files" can and does show multiple entries when the index is
unmerged, which is a source for confusion unless -s/-u option is in
use. A new option --deduplicate has been introduced.
* zh/ls-files-deduplicate:
ls-files.c: add --deduplicate option
ls_files.c: consolidate two for loops into one
ls_files.c: bugfix for --deleted and --modified
|
|
Document, clean-up and optimize the code around the cache-tree
extension in the index.
* ds/cache-tree-basics:
cache-tree: speed up consecutive path comparisons
cache-tree: use ce_namelen() instead of strlen()
index-format: discuss recursion of cache-tree better
index-format: update preamble to cache tree extension
index-format: use 'cache tree' over 'cached tree'
cache-tree: trace regions for prime_cache_tree
cache-tree: trace regions for I/O
cache-tree: use trace2 in cache_tree_update()
unpack-trees: add trace2 regions
tree-walk: report recursion counts
|
|
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
|
|
The peel_ref() API has been replaced with peel_iterated_oid().
* jk/peel-iterated-oid:
refs: switch peel_ref() to peel_iterated_oid()
|
|
Test clean-up plus UI improvement by hiding extra refs that
the prefetch task uses from "log --decorate" output.
* ds/maintenance-prefetch-cleanup:
t7900: clean up some broken refs
maintenance: set log.excludeDecoration durin prefetch
|
|
The test case added by 9466e3809d ("blame: enable funcname blaming with
userdiff driver", 2020-11-01) forgot to quote variable expansions. This
causes failures when the current directory contains blanks.
One variable that the test case introduces will not have IFS characters
and could remain without quotes, but let's quote all expansions for
consistency, not just the one that has the path name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) introduced a new test to ensure locked worktrees are listed
with "locked" annotation. However, the test does not clean up after
itself as "git worktree prune" is not going to remove the locked worktree
in the first place. This not only leaves the test in an unclean state it
also potentially breaks following tests that rely on the
"git worktree list" output.
Let's fix that by unlocking the worktree before the "prune" command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using "1~5" isn't portable. Nobody seems to have noticed, since perhaps
people don't tend to run the perf suite on more exotic platforms. Still,
it's better to set a good example.
We can use:
perl -ne 'print if $. % 5 == 1'
instead. But we can further observe that perl does a good job of the
other parts of this pipeline, and fold the whole thing together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we expand a user-format, we try to avoid work that isn't necessary
for the output. For instance, we don't bother parsing the commit header
until we know we need the author, subject, etc.
But we do always load the commit object's contents from disk, even if
the format doesn't require it (e.g., just "%H"). Traditionally this
didn't matter much, because we'd have loaded it as part of the traversal
anyway, and we'd typically have those bytes attached to the commit
struct (or these days, cached in a commit-slab).
But when we have a commit-graph, we might easily get to the point of
pretty-printing a commit without ever having looked at the actual object
contents. We should push off that load (and reencoding) until we're
certain that it's needed.
I think the results of p4205 show the advantage pretty clearly (we serve
parent and tree oids out of the commit struct itself, so they benefit as
well):
# using git.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 0.40(0.39+0.01) 0.03(0.02+0.01) -92.5%
4205.2: log with %h 0.45(0.44+0.01) 0.09(0.09+0.00) -80.0%
4205.3: log with %T 0.40(0.39+0.00) 0.04(0.04+0.00) -90.0%
4205.4: log with %t 0.46(0.46+0.00) 0.09(0.08+0.01) -80.4%
4205.5: log with %P 0.39(0.39+0.00) 0.03(0.03+0.00) -92.3%
4205.6: log with %p 0.46(0.46+0.00) 0.10(0.09+0.00) -78.3%
4205.7: log with %h-%h-%h 0.52(0.51+0.01) 0.15(0.14+0.00) -71.2%
4205.8: log with %an-%ae-%s 0.42(0.41+0.00) 0.42(0.41+0.01) +0.0%
# using linux.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 7.12(6.97+0.14) 0.76(0.65+0.11) -89.3%
4205.2: log with %h 7.35(7.19+0.16) 1.30(1.19+0.11) -82.3%
4205.3: log with %T 7.58(7.42+0.15) 1.02(0.94+0.08) -86.5%
4205.4: log with %t 8.05(7.89+0.15) 1.55(1.41+0.13) -80.7%
4205.5: log with %P 7.12(7.01+0.10) 0.76(0.69+0.07) -89.3%
4205.6: log with %p 7.38(7.27+0.10) 1.32(1.20+0.12) -82.1%
4205.7: log with %h-%h-%h 7.81(7.67+0.13) 1.79(1.67+0.12) -77.1%
4205.8: log with %an-%ae-%s 7.90(7.74+0.15) 7.81(7.66+0.15) -1.1%
I added the final test to show where we don't improve (the 1% there is
just lucky noise), but also as a regression test to make sure we're not
doing anything stupid like loading the commit multiple times when there
are several placeholders that need it.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 6e98de72c03 (sequencer (rebase -i): add support for the 'fixup' and
'squash' commands, 2017-01-02), this developer introduced a change of
behavior by mistake: when encountering a `fixup!` commit (or multiple
`fixup!` commits) without any `squash!` commit thrown in, the final `git
commit` was invoked with `--cleanup=strip`. Prior to that commit, the
commit command had been called without that `--cleanup` option.
Since we explicitly read the original commit message from a file in that
case, there is really no sense in forcing that clean-up.
We actually need to actively suppress that clean-up lest a configured
`commit.cleanup` may interfere with what we want to do: leave the commit
message unchanged.
Reported-by: Vojtěch Knyttl <vojtech@knyt.tl>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we use the sub-test helpers, we end up defining one shell snippet
inside another shell snippet. So if we use single-quotes for the outer
snippet, we have to use double-quotes within the inner snippet (it's
included as here-doc within the outer snippet, but using a single quote
would end the outer snippet early). Or vice versa we can use double
quotes for the outer snippet, but then single quotes in the inner.
We have some of each in the script, and neither is wrong. But it would
be nice to be consistent unless there is a good reason not to. Using
single quotes for the outer script is preferable, because it requires
less metacharacter quoting overall. For example, in:
test_expect_success 'outer' '
run_sub_test_lib_test ... <<-\EOF
echo $foo &&
test_expect_success "inner" "
echo \$bar
"
EOF
'
we need only quote inside "inner", but not inside "outer" or the
here-doc. Whereas if we flip them, we have to quote in both places:
test_expect_success 'outer' "
run_sub_test_lib_test ... <<-\EOF
echo \$foo &&
test_expect_success 'inner' '
echo \$bar
'
EOF
"
The exception is when we need a literal single-quote in an expected
output here-doc. There we can either use outer double-quotes, or just
use ${SQ} within the doc. I chose the latter for consistency (within
this test, but also with other test scripts that face the same problem).
There is one other interesting case, which is some tests that do:
test_expect_success ... "
do_something --run='"'!3'"'
"
This is rather confusing to read, but is correct. The outer script sees
'!3' in single-quotes, as does the eval'd snippet. This is perhaps being
overly cautious. In many interactive shells, an exclamation triggers
history expansion even inside double quotes, but that is not generally
true in non-interactive shells.
There's some conflicting information here. Commit 784ce03d55 (t4216:
avoid unnecessary subshell in test_bloom_filters_not_used, 2020-05-19)
reports it as a problem with OpenBSD 6.7's /bin/sh. However, we have
many instances in this script of prereqs like !LAZY_TRUE, which haven't
been a problem. I left them un-escaped here to test out this theory.
It's much nicer if we can not worry about this as a portability issue,
so it's worth knowing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our check of test_when_finished is done directly in the main script, and
if we failed to clean, we complain and exit immediately. It's nicer to
signal a test failure here, for a few reasons:
- this gives better output to the user when run under a TAP harness
like "prove"
- constency; it's the only test left in the file that behaves this way
- half of its "if" conditional is nonsense anyway; it picked up a
reference to GIT_TEST_FAIL_PREREQS_INTERNAL in dfe1a17df9 (tests:
add a special setup where prerequisites fail, 2019-05-13) along with
its neighbors, even though it has nothing to do with that flag
We could actually do this without a sub-test at all, and just put our
two tests (one to do cleanup, and one to check that it happened) in the
main script. But doing it in a subtest is conceptually cleaner (from the
perspective of the main test script, we are checking only one thing),
and it remains consistent with the "cleanup when failing" test directly
after it, which has to happen in a sub-test (to avoid the main script
complaining of the failed test).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We test the behavior of prerequisites in t0000 by setting up fake ones
in the main test script, trying to run some tests, and then seeing if
those tests impacted the environment correctly. If they didn't, then we
write a message and manually call exit.
Instead, let's push these down into a sub-test, like many of the other
tests covering the framework itself. This has a few advantages:
- it does not pollute the test output with mention of skipped tests
(that we know are uninteresting -- the point of the test was to see
that these are skipped).
- when running in a TAP harness, we get a useful test failure message
(whereas when the script exits early, a tool like "prove" simply
says "Dubious, test returned 1").
- we do not have to worry about different test environments, such as
when GIT_TEST_FAIL_PREREQS_INTERNAL is set. Our sub-test helpers
already give us a known environment.
- the tests themselves are a bit easier to read, as we can just check
the test-framework output to see what happened (and get the usual
test_cmp diff if it failed)
A few notes on the implementation:
- we could do one sub-test per each individual test_expect_success. I
broke it up here into a few logical groups, as I think this makes it
more readable
- the original tests modified environment variables inside the test
bodies. Instead, I've used "true" as the body of a test we expect to
run and "false" otherwise. Technically this does not confirm that
the body of the "true" test actually ran. We are trusting the
framework output to believe that it truly ran, which is sufficient
for these tests. And I think the end result is much simpler to
follow.
- the nested_prereq test uses a few bare "test -f" calls; I converted
these to our usual test_path_is_* helpers while moving the code
around.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check that test_when_finished cleans up after a test, and that it
runs even after a failure. Those two were originally adjacent, but got
split apart by the new test added in 477dcaddb6 (tests: do not let lazy
prereqs inside `test_expect_*` turn off tracing, 2020-03-26), and then
further by more lazy-prereq tests. Let's move them back together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'./t1234-foo.sh --stress-jobs=X ...' is supposed to run that test
script in X parallel jobs, but the number of jobs specified on the
command line is entirely ignored if other '--stress'-related options
follow. I.e. both './t1234-foo.sh --stress-jobs=X --stress-limit=Y'
and './t1234-foo.sh --stress-jobs=X --stress' fall back to using twice
the number of CPUs parallel jobs instead.
The former has been broken since commit de69e6f6c9 (tests: let
--stress-limit=<N> imply --stress, 2019-03-03) [1], which started to
unconditionally overwrite the $stress variable holding the specified
number of jobs in its effort to imply '--stress'. The latter has been
broken since f545737144 (tests: introduce --stress-jobs=<N>,
2019-03-03), because it didn't consider that handling '--stress' will
overwrite that variable as well.
We could fix this by being more careful about (over)writing that
$stress variable and checking first whether it has already been set.
But I think it's cleaner to use a dedicated variable to hold the
number of specified parallel jobs, so let's do that instead.
[1] In de69e6f6c9 there was no '--stress-jobs=X' option yet, the
number of parallel jobs had to be specified via '--stress=X', so,
strictly speaking, de69e6f6c9 broke './t1234-foo.sh --stress=X
--stress-limit=Y'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow-up fixes and improvements to ab/mailmap topic.
* ab/mailmap-fixup:
t4203: make blame output massaging more robust
mailmap doc: use correct environment variable 'GIT_WORK_TREE'
t4203: stop losing return codes of git commands
test-lib-functions.sh: fix usage for test_commit()
|
|
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
|
|
"git bundle" learns "--stdin" option to read its refs from the
standard input. Also, it now does not lose refs whey they point
at the same object.
* jx/bundle:
bundle: arguments can be read from stdin
bundle: lost objects when removing duplicate pendings
test: add helper functions for git-bundle
|
|
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
|
|
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
|
|
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
* jk/log-cherry-pick-duplicate-patches:
patch-ids: handle duplicate hashmap entries
|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
After expiring a reflog and making a single commit, the reflog for
the branch would record a single entry that knows both @{0} and
@{1}, but we failed to answer "what commit were we on?", i.e. @{1}
* dl/reflog-with-single-entry:
refs: allow @{n} to work with n-sized reflog
refs: factor out set_read_ref_cutoffs()
|
|
"git diff" showed a submodule working tree with untracked cruft as
"Submodule commit <objectname>-dirty", but a natural expectation is
that the "-dirty" indicator would align with "git describe --dirty",
which does not consider having untracked files in the working tree
as source of dirtiness. The inconsistency has been fixed.
* sj/untracked-files-in-submodule-directory-is-not-dirty:
diff: do not show submodule with untracked files as "-dirty"
|
|
Warn loudly when the "pack-redundant" command, which has been left
stale with almost unusable performance issues, gets used, as we no
longer want to recommend its use (instead just "repack -d" instead).
* jc/deprecate-pack-redundant:
pack-redundant: gauge the usage before proposing its removal
|
|
Newline characters in the host and path part of git:// URL are
now forbidden.
* jk/forbid-lf-in-git-url:
fsck: reject .gitmodules git:// urls with newlines
git_connect_git(): forbid newlines in host and path
|
|
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
|
|
File-level rename detection updates.
* en/diffcore-rename:
diffcore-rename: remove unnecessary duplicate entry checks
diffcore-rename: accelerate rename_dst setup
diffcore-rename: simplify and accelerate register_rename_src()
t4058: explore duplicate tree entry handling in a bit more detail
t4058: add more tests and documentation for duplicate tree entry handling
diffcore-rename: reduce jumpiness in progress counters
diffcore-rename: simplify limit check
diffcore-rename: avoid usage of global in too_many_rename_candidates()
diffcore-rename: rename num_create to num_destinations
|
|
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
|
|
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in [1] when I originally added this test in [2] the test was
completely broken as it lacked a redirect[3]. I now think this whole
thing is overly fragile. Let's only test if we have a segfault here.
Before this the first test's "test_cmp" was pretty meaningless. We
were only testing if PCREv2 was so broken that it would spew out
something completely unrelated on stdout, which isn't very plausible.
In the second test we're relying on PCREv2 forever holding to the
current behavior of the PCRE_UTF8 flag, as opposed to learning some
optimistic graceful fallback to PCRE2_MATCH_INVALID_UTF in the
future. If that happens having this test broken under bisecting would
suck.
A follow-up commit will actually test this case in a meaningful way
under the PCRE2_MATCH_INVALID_UTF flag. Let's run this one
unconditionally, and just make sure we don't segfault.
1. e714b898c6 (t7812: expect failure for grep -i with invalid UTF-8
data, 2019-11-29)
2. 8a5999838e (grep: stess test PCRE v2 on invalid UTF-8 data,
2019-07-26)
3. c74b3cbb83 (t7812: add missing redirects, 2019-11-26)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Junio C Hamano
Johannes Sixt
Rafael Silva
Jeff King
Johannes Schindelin
SZEDER Gábor
Ævar Arnfjörð Bjarmason