| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Comit c24b7f6736 (pager: test for exit code with and without SIGPIPE,
2021-02-02) introduced some tests that don't reliably generate SIGPIPE
where we expect it (i.e., when our pager doesn't read all of the output
from git-log).
There are two problems that somewhat cancel each other out.
First is that the output of git-log isn't very large (only around 800
bytes). So even if the pager doesn't read all of our output, it's racy
whether or not we'll actually get a SIGPIPE (we won't if we write all of
the output into the pipe buffer before the pager exits).
But we wrap git-log with test_terminal, which is supposed to propagate
the exit status of git-log. However, it doesn't always do so;
test_terminal will copy to stdout any lines that it got from our fake
pager, and it pipes to an empty command. So most of the time we are
seeing a SIGPIPE from test_terminal itself (though this is likewise
racy).
Let's try to make this more robust in two ways:
1. We'll put a commit with a huge message at the tip of history. Since
this is over a megabyte, it should fill the OS pipe buffer
completely, causing git-log to keep trying to write even after the
pager has exited.
2. We'll redirect the output of test_terminal to /dev/null. That means
it can never get SIGPIPE itself, and will always be giving us the
exit code from git-log.
These two changes reveal that one of the tests was looking for the wrong
behavior. If we try to start a pager that does not exist (according to
execve()), then the error propagates from start_command() back to the
pager code as an error, and we avoid redirecting git-log's stdout to the
broken pager entirely. Instead, it goes straight to the original stdout
(test_terminal's pty in this case), and we do not see a SIGPIPE at all.
So the test "git attempts to page to nonexisting pager command, gets
SIGPIPE" is checking the wrong outcome; it should be looking for a
successful exit (and was only confused by test_terminal's SIGPIPE).
There's a related test, "git discards nonexisting pager without
SIGPIPE", which sets the pager to a shell command which will read all
input and _then_ run a non-existing command. But that doesn't trigger
the same execve() behavior. We really do run the shell there and
redirect git-log's stdout to it. And the fact that the shell then exits
127 is not interesting. It is not different at that point than the
earlier test to check for "exit 1". So we can drop that test entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 507d7804c0 (pager: don't use unsafe functions in signal handlers,
2015-09-04), we have a separate code path in wait_or_whine() for the
case that we're in a signal handler. But that code path misses some of
the cases handled by the main logic.
This was improved in be8fc53e36 (pager: properly log pager exit code
when signalled, 2021-02-02), but that covered only case: actually
returning the correct error code. But there are some other cases:
- if waitpid() returns failure, we wouldn't notice and would look at
uninitialized garbage in the status variable; it's not clear if it's
possible to trigger this or not
- if the process exited by signal, then we would still report "-1"
rather than the correct signal code
This latter case even had a test added in be8fc53e36, but it doesn't
work reliably. It sets the pager command to:
>pager-used; test-tool sigchain
The latter command will die by signal, but because there are multiple
commands, there will be a shell in between. And it's the shell whose
waitpid() call will see the signal death, and it will then exit with
code 143, which is what Git will see.
To make matters even more confusing, some shells (such as bash) will
realize that there's nothing for the shell to do after test-tool
finishes, and will turn it into an exec. So the test was only checking
what it thought when /bin/sh points to a shell like bash (we're relying
on the shell used internally by Git to spawn sub-commands here, so even
running the test under bash would not be enough).
This patch adjusts the tests to explicitly call "exec" in the pager
command, which produces a consistent outcome regardless of shell. Note
that without the code change in this patch it _should_ fail reliably,
but doesn't. That test, like its siblings, tries to trigger SIGPIPE in
the git-log process writing to the pager, but only do so racily. That
will be fixed in a follow-on patch.
For the code change here, we have two options:
- we can teach the in_signal code to handle WIFSIGNALED()
- we can stop returning early when in_signal is set, and instead
annotate individual calls that we need to skip in this case
The former is a simpler patch, but means we're essentially duplicating
all of the logic. So instead I went with the latter. The result is a
bigger patch, and we do run the risk of new code being added but
forgetting to handle in_signal. But in the long run it seems more
maintainable.
I've skipped any non-trivial calls for the in_signal case, like calling
error(). We'll also skip the call to clear_child_for_cleanup(), as we
were before. This is arguably the wrong thing to do, since we wouldn't
want to try to clean it up again. But:
- we can't call it as-is, because it calls free(), which we must avoid
in a signal handler (we'd have to pass in_signal so it can skip the
free() call)
- we'll only go through the list of children to clean once, since our
cleanup_children_on_signal() handler pops itself after running (and
then re-raises, so eventually we'd just exit). So this cleanup only
matters if a process is on the cleanup list _and_ it has a separate
handler to clean itself up. Which is questionable in the first place
(and AFAIK we do not do).
- double-cleanup isn't actually that bad anyway. waitpid() will just
return an error, which we won't even report because of in_signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git invokes a pager that exits with non-zero the common case is
that we'll already return the correct SIGPIPE failure from git itself,
but the exit code logged in trace2 has always been incorrectly
reported[1]. Fix that and log the correct exit code in the logs.
Since this gives us something to test outside of our recently-added
tests needing a !MINGW prerequisite, let's refactor the test to run on
MINGW and actually check for SIGPIPE outside of MINGW.
The wait_or_whine() is only called with a true "in_signal" from from
finish_command_in_signal(), which in turn is only used in pager.c.
The "in_signal && !WIFEXITED(status)" case is not covered by
tests. Let's log the default -1 in that case for good measure.
1. The incorrect logging of the exit code in was seemingly copy/pasted
into finish_command_in_signal() in ee4512ed481 (trace2: create new
combined trace facility, 2019-02-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests for how git behaves when the pager itself exits with
non-zero, as well as for us exiting with 141 when we're killed with
SIGPIPE due to the pager not consuming its output.
There is some recent discussion[1] about these semantics, but aside
from what we want to do in the future, we should have a test for the
current behavior.
This test construct is stolen from 7559a1be8a0 (unblock and unignore
SIGPIPE, 2014-09-18). The reason not to make the test itself depend on
the MINGW prerequisite is to make a subsequent commit easier to read.
1. https://lore.kernel.org/git/87o8h4omqa.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow-up fixes and improvements to ab/mailmap topic.
* ab/mailmap-fixup:
t4203: make blame output massaging more robust
mailmap doc: use correct environment variable 'GIT_WORK_TREE'
t4203: stop losing return codes of git commands
test-lib-functions.sh: fix usage for test_commit()
|
|
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
|
|
"git bundle" learns "--stdin" option to read its refs from the
standard input. Also, it now does not lose refs whey they point
at the same object.
* jx/bundle:
bundle: arguments can be read from stdin
bundle: lost objects when removing duplicate pendings
test: add helper functions for git-bundle
|
|
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
|
|
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
|
|
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
* jk/log-cherry-pick-duplicate-patches:
patch-ids: handle duplicate hashmap entries
|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
After expiring a reflog and making a single commit, the reflog for
the branch would record a single entry that knows both @{0} and
@{1}, but we failed to answer "what commit were we on?", i.e. @{1}
* dl/reflog-with-single-entry:
refs: allow @{n} to work with n-sized reflog
refs: factor out set_read_ref_cutoffs()
|
|
"git diff" showed a submodule working tree with untracked cruft as
"Submodule commit <objectname>-dirty", but a natural expectation is
that the "-dirty" indicator would align with "git describe --dirty",
which does not consider having untracked files in the working tree
as source of dirtiness. The inconsistency has been fixed.
* sj/untracked-files-in-submodule-directory-is-not-dirty:
diff: do not show submodule with untracked files as "-dirty"
|
|
Warn loudly when the "pack-redundant" command, which has been left
stale with almost unusable performance issues, gets used, as we no
longer want to recommend its use (instead just "repack -d" instead).
* jc/deprecate-pack-redundant:
pack-redundant: gauge the usage before proposing its removal
|
|
Newline characters in the host and path part of git:// URL are
now forbidden.
* jk/forbid-lf-in-git-url:
fsck: reject .gitmodules git:// urls with newlines
git_connect_git(): forbid newlines in host and path
|
|
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
|
|
File-level rename detection updates.
* en/diffcore-rename:
diffcore-rename: remove unnecessary duplicate entry checks
diffcore-rename: accelerate rename_dst setup
diffcore-rename: simplify and accelerate register_rename_src()
t4058: explore duplicate tree entry handling in a bit more detail
t4058: add more tests and documentation for duplicate tree entry handling
diffcore-rename: reduce jumpiness in progress counters
diffcore-rename: simplify limit check
diffcore-rename: avoid usage of global in too_many_rename_candidates()
diffcore-rename: rename num_create to num_destinations
|
|
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
|
|
Test fix.
* ad/t4129-setfacl-target-fix:
t4129: fix setfacl-related permissions failure
|
|
Test fix.
* jk/t5516-deflake:
t5516: loosen "not our ref" error check
|
|
Fix 2.29 regression where "git mergetool --tool-help" fails to list
all the available tools.
* pb/mergetool-tool-help-fix:
mergetool--lib: fix '--tool-help' to correctly show available tools
|
|
"git for-each-repo --config=<var> <cmd>" should not run <cmd> for
any repository when the configuration variable <var> is not defined
even once.
* ds/for-each-repo-noopfix:
for-each-repo: do nothing on empty config
|
|
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
|
|
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
|
|
Bash completion (in contrib/) update to make it easier for
end-users to add completion for their custom "git" subcommands.
* fc/completion-aliases-support:
completion: add proper public __git_complete
test: completion: add tests for __git_complete
completion: bash: improve function detection
completion: bash: add __git_have_func helper
|
|
"git stash" did not work well in a sparsely checked out working
tree.
* en/stash-apply-sparse-checkout:
stash: fix stash application in sparse-checkouts
stash: remove unnecessary process forking
t7012: add a testcase demonstrating stash apply bugs in sparse checkouts
|
|
Test update.
* ar/t6016-modernise:
t6016: move to lib-log-graph.sh framework
|
|
Test fix.
* nk/perf-fsmonitor-cleanup:
p7519: allow running without watchman prereq
|
|
Retire more names with "sha1" in it.
* ma/sha1-is-a-hash:
hash-lookup: rename from sha1-lookup
sha1-lookup: rename `sha1_pos()` as `hash_pos()`
object-file.c: rename from sha1-file.c
object-name.c: rename from sha1-name.c
|
|
Code clean-up.
* ma/t1300-cleanup:
t1300: don't needlessly work with `core.foo` configs
t1300: remove duplicate test for `--file no-such-file`
t1300: remove duplicate test for `--file ../foo`
|
|
"git rev-parse" can be explicitly told to give output as absolute
or relative path with the `--path-format=(absolute|relative)` option.
* bc/rev-parse-path-format:
rev-parse: add option for absolute or relative path formatting
abspath: add a function to resolve paths with missing components
|
|
The configuration variable 'core.abbrev' can be set to 'no' to
force no abbreviation regardless of the hash algorithm.
* ew/decline-core-abbrev:
core.abbrev=no disables abbreviations
|
|
While we currently have the `GIT_CONFIG_PARAMETERS` environment variable
which can be used to pass runtime configuration data to git processes,
it's an internal implementation detail and not supposed to be used by
end users.
Next to being for internal use only, this way of passing config entries
has a major downside: the config keys need to be parsed as they contain
both key and value in a single variable. As such, it is left to the user
to escape any potentially harmful characters in the value, which is
quite hard to do if values are controlled by a third party.
This commit thus adds a new way of adding config entries via the
environment which gets rid of this shortcoming. If the user passes the
`GIT_CONFIG_COUNT=$n` environment variable, Git will parse environment
variable pairs `GIT_CONFIG_KEY_$i` and `GIT_CONFIG_VALUE_$i` for each
`i` in `[0,n)`.
While the same can be achieved with `git -c <name>=<value>`, one may
wish to not do so for potentially sensitive information. E.g. if one
wants to set `http.extraHeader` to contain an authentication token,
doing so via `-c` would trivially leak those credentials via e.g. ps(1),
which typically also shows command arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit added a new format for $GIT_CONFIG_PARAMETERS which
is able to robustly handle subsections with "=" in them. Let's start
writing the new format. Unfortunately, this does much less than you'd
hope, because "git -c" itself has the same ambiguity problem! But it's
still worth doing:
- we've now pushed the problem from the inter-process communication
into the "-c" command-line parser. This would free us up to later
add an unambiguous format there (e.g., separate arguments like "git
--config key value", etc).
- for --config-env, the parser already disallows "=" in the
environment variable name. So:
git --config-env section.with=equals.key=ENVVAR
will robustly set section.with=equals.key to the contents of
$ENVVAR.
The new test shows the improvement for --config-env.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we stuff config options into GIT_CONFIG_PARAMETERS, we shell-quote
each one as a single unit, like:
'section.one=value1' 'section.two=value2'
On the reading side, we de-quote to get the individual strings, and then
parse them by splitting on the first "=" we find. This format is
ambiguous, because an "=" may appear in a subsection. So the config
represented in a file by both:
[section "subsection=with=equals"]
key = value
and:
[section]
subsection = with=equals.key=value
ends up in this flattened format like:
'section.subsection=with=equals.key=value'
and we can't tell which was desired. We have traditionally resolved this
by taking the first "=" we see starting from the left, meaning that we
allowed arbitrary content in the value, but not in the subsection.
Let's make our environment format a bit more robust by separately
quoting the key and value. That turns those examples into:
'section.subsection=with=equals.key'='value'
and:
'section.subsection'='with=equals.key=value'
respectively, and we can tell the difference between them. We can detect
which format is in use for any given element of the list based on the
presence of the unquoted "=". That means we can continue to allow the
old format to work to support any callers which manually used the old
format, and we can even intermingle the two formats. The old format
wasn't documented, and nobody was supposed to be using it. But it's
likely that such callers exist in the wild, so it's nice if we can avoid
breaking them. Likewise, it may be possible to trigger an older version
of "git -c" that runs a script that calls into a newer version of "git
-c"; that new version would see the intermingled format.
This does create one complication, which is that the obvious format in
the new scheme for
[section]
some-bool
is:
'section.some-bool'
with no equals. We'd mistake that for an old-style variable. And it even
has the same meaning in the old style, but:
[section "with=equals"]
some-bool
does not. It would be:
'section.with=equals=some-bool'
which we'd take to mean:
[section]
with = equals=some-bool
in the old, ambiguous style. Likewise, we can't use:
'section.some-bool'=''
because that's ambiguous with an actual empty string. Instead, we'll
again use the shell-quoting to give us a hint, and use:
'section.some-bool'=
to show that we have no value.
Note that this commit just expands the reading side. We'll start writing
the new format via "git -c" in a future patch. In the meantime, the
existing "git -c" tests will make sure we didn't break reading the old
format. But we'll also add some explicit coverage of the two formats to
make sure we continue to handle the old one after we move the writing
side over.
And one final note: since we're now using the shell-quoting as a
semantically meaningful hint, this closes the door to us ever allowing
arbitrary shell quoting, like:
'a'shell'would'be'ok'with'this'.key=value
But we have never supported that (only what sq_quote() would produce),
and we are probably better off keeping things simple, robust, and
backwards-compatible, than trying to make it easier for humans. We'll
continue not to advertise the format of the variable to users, and
instead keep "git -c" as the recommended mechanism for setting config
(even if we are trying to be kind not to break users who may be relying
on the current undocumented format).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the "git blame --porcelain" output, lines that ends with three
integers may not be the line that shows a commit object with line
numbers and block length (the contents from the blamed file or the
summary field can have a line that happens to match). Also, the
names of the author may have more than three SP separated tokens
("git blame -L242,+1 cf6de18aabf7 Documentation/SubmittingPatches"
gives an example). The existing "grep -E | cut" pipeline is a bit
too loose on these two points.
While they can be assumed on the test data, it is not so hard to
use the right pattern from the documented format, so let's do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a pipe, only the return code of the last command is used. Thus, all
other commands will have their return codes masked. Rewrite pipes so
that there are no git commands upstream so that their failure is
reported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The usage comment for test_commit() shows that the --author option
should be given as `--author=<author>`. However, this is incorrect as it
only works when given as `--author <author>`. Correct this erroneous
text.
Also, for the sake of correctness, fix the description as well since we
invoke `git commit` with `--author <author>`, not `--author=<author>`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add documentation and more tests for case-insensitivity. The existing
test only matched on the E-Mail part, but as shown here we also match
the name with strcasecmp().
This behavior was last discussed on the mailing list in the thread
starting at [1]. It seems we're keeping it like this, so let's
document it.
1. https://lore.kernel.org/git/87czykvg19.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests for mailmap's handling of "<>", which is allowed on the RHS,
but not the LHS of a "<LHS> <RHS>" pair.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests for mailmap's handling of whitespace, i.e. how it trims
space within "<>" and around author names.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test for mailmap comment syntax. As noted in [1] there was no
test coverage for this. Let's make sure a future change doesn't break
it.
1. https://lore.kernel.org/git/CAN0heSoKYWXqskCR=GPreSHc6twCSo1345WTmiPdrR57XSShhA@mail.gmail.com/
Reported-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the mailmap documentation added in 0925ce4d49 (Add map_user()
and clear_mailmap() to mailmap, 2009-02-08) to continue discussing the
Jane/Joe example. I think this makes things a lot less confusing as
we're building up more complex examples using one set of data which
covers all the things we'd like to discuss.
Also add tests to assert that what our documentation says is what's
actually happening. This is mostly (or entirely) covered by existing
tests which I'm not deleting, but having these tests for the synopsis
makes it easier to follow-along while reading the tests & docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor a few more tests to use the new "--append" option to
"test_commit". I added it for use in the mailmap tests, but this
demonstrates how useful it is in general.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an --append option to test_commit to append <contents> to the
<file> we're writing to. This simplifies a lot of test setup, as shown
in some of the tests being changed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for --author to "test_commit". This will simplify some
current and future tests, one of those is being changed here.
Let's also line-wrap the "git commit" command invocation to make diffs
that add subsequent options easier to add, as they'll only need to add
a new option line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --notick argument was added in [1] and was followed by --signoff
in [2], but neither of these commits added any documentation for these
options. When -C was added in [3] a comment was added to document it,
but not the other options. Let's document all of these options.
1. 44b85e89d7 (t7003: add test to filter a branch with a commit at
epoch, 2012-07-12),
2. 5ed75e2a3f (cherry-pick: don't forget -s on failure, 2012-09-14).
3. 6f94351b0a (test-lib-functions.sh: teach test_commit -C <dir>,
2016-12-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expand the comment template for "test_commit" to match that of
"test_commit_bulk" added in b1c36cb849 (test-lib: introduce
test_commit_bulk, 2019-07-02). It has several undocumented options,
which won't all fit on one line. Follow-up commit(s) will document
them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That we silently ignore missing mailmap.file or mailmap.blob values is
intentional. See 938a60d64f (mailmap: clean up read_mailmap error
handling, 2012-12-12). However, nothing tested for this. Let's do that
by checking that stderr is empty in those cases.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change a test that used a custom fuzzing function since
bfdfa3d414 (t4203 (mailmap): stop hardcoding commit ids and dates,
2010-10-15) to just use the "blame --porcelain" output instead.
We could use the same pattern as 0ba9c9a0fb (t8008: rely on
rev-parse'd HEAD instead of sha1 value, 2017-07-26) does to do this,
but there wouldn't be any point. We're not trying to test "blame"
output here in general, just that "blame" pays attention to the
mailmap.
So it's sufficient to get the blamed line(s) and authors from the
output, which is much easier with the "--porcelain" option.
It would still be possible for there to be a bug in "blame" such that
it uses the mailmap for its "--porcelain" output, but not the regular
output. Let's test for that simply by checking if specifying the
mailmap changes the output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Ævar Arnfjörð Bjarmason
Junio C Hamano
Patrick Steinhardt
Denton Liu