| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce a "test_config" function to set a configuration variable
for use by a single test (automatically unsetting it when the
assertion finishes). If this function is used consistently, the
configuration used in a test_expect_success block can be read at the
beginning of that block instead of requiring reading all the tests
that come before. So it becomes a little easier to add new tests or
rearrange existing ones without fear of breaking configuration.
In particular, the test of alternation in xfuncname patterns also
checks that xfuncname takes precedence over funcname variable as a
sort of side-effect, since the latter leaks in from previous tests.
In the new syntax, the test has to say explicitly what variables it is
using, making the test clearer and a future regression in coverage
from carelessly editing the script less likely.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most, but not all, tests in this script rely on attributes declaring
that files with a .java extension should use the "java" driver:
*.java diff=java
Split out a "set up" test to put such a .gitattributes in place after
the tests that do not want it have run, to make it more likely that
individual tests other than this setup test can be safely modified,
rearranged, or skipped. Presumably this setup code will learn to
request other drivers for other extensions in the same place when the
test suite learns to exercise other diff drivers.
Similarly, make sure that early test assertions that do not use these
default attributes set up .gitattributes appropriately for themselves,
so tests that run before can be modified with less risk of breaking
something.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git svn log --show-commit had no tests and, consequently, no attention
by the author of
b1b4755 (git-log: put space after commit mark, 2011-03-10)
who kept git svn log working only without --show-commit.
Introduce a test and fix it.
Reported-by: Bernt Hansen <bernt@norang.ca>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/t1506-shell-param-expansion-gotcha:
t1507: avoid "${parameter<op>'word'}" inside double-quotes
|
|
* jc/fix-add-u-unmerged:
Fix "add -u" that sometimes fails to resolve unmerged paths
Conflicts:
builtin/add.c
|
|
* jc/maint-branch-mergeoptions:
merge: make branch.<name>.mergeoptions correctly override merge.<option>
Conflicts:
builtin/merge.c
|
|
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
|
|
* jm/mergetool-submodules:
mergetool: Teach about submodules
|
|
* jk/format-patch-quote-special-in-from:
pretty: quote rfc822 specials in email addresses
|
|
* aw/maint-rebase-i-p-no-ff:
git-rebase--interactive.sh: preserve-merges fails on merges created with no-ff
|
|
* js/blame-parsename:
t/annotate-tests: Use echo & cat instead of sed
blame: tolerate bogus e-mail addresses a bit better
|
|
* jk/merge-one-file-working-tree:
merge-one-file: fix broken merges with alternate work trees
add tests for merge-index / merge-one-file
|
|
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
|
|
* mz/maint-rename-unmerged:
diffcore-rename: don't consider unmerged path as source
|
|
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Kacper Kornet noticed that a $variable in "word" in the above construct is
not substituted by his pdksh. Modern POSIX compliant shells (e.g. dash,
ksh, bash) all seem to interpret POSIX "2.6.2 Parameter Expansion" that
says "word shall be subjected to tilde expansion, parameter expansion,
command substitution, and arithmetic expansion" in ${parameter<op>word},
to mean that the word is expanded as if it appeared in dq pairs, so if the
word were "'$variable'" (sans dq) it would expand to a single quote, the
value of the $variable and then a single quote.
Johannes Sixt reports that the behavior of quoting at the right of :- when
the ${...:-...} expansion appears in double-quotes was debated recently at
length at the Austin group. We can avoid this issue and future-proof the
test by a slight rewrite.
Helped-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parsing of the additional command line parameters supplied to
the branch.<name>.mergeoptions configuration variable was implemented
at the wrong stage. If any merge-related variable came after we read
branch.<name>.mergeoptions, the earlier value was overwritten.
We should first read all the merge.* configuration, override them by
reading from branch.<name>.mergeoptions and then finally read from
the command line.
This patch should fix it, even though I now strongly suspect that
branch.<name>.mergeoptions that gives a single command line that
needs to be parsed was likely to be an ill-conceived idea to begin
with. Sigh...
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A broken here-document was not caught because end of file is taken by
an implicit end of the here document (POSIX does not seem to say it is
an error to lack the delimiter), and everything in the test just turned
into a single "cat into a file".
Noticed-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The use of the sed command "1i No robots allowed" caused the version
of sed in OS X to die with
sed: 1: "1i "No robots allowed"\n": command i expects \ followed by
text
Since this command was just trying to add a single line to the
beginning of the file, do the same with "echo" followed by "cat".
Unbreaks t8001 and t8002 on OS X 10.6.7
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
|
|
* jk/maint-stash-oob:
stash: fix false positive in the invalid ref test.
stash: fix accidental apply of non-existent stashes
Conflicts:
t/t3903-stash.sh
|
|
* dm/stash-k-i-p:
stash: ensure --no-keep-index and --patch can be used in any order
stash: add two more tests for --no-keep-index
|
|
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
|
|
* jk/stash-loosen-safety:
stash: drop dirty worktree check on apply
|
|
* ar/clean-rmdir-empty:
clean: unreadable directory may still be rmdir-able if it is empty
|
|
* mg/sha1-path-advise:
sha1_name: Suggest commit:./file for path in subdir
t1506: factor out test for "Did you mean..."
|
|
The merge-one-file tool predates the invention of
GIT_WORK_TREE. By the time GIT_WORK_TREE was invented, most
people were using the merge-recursive strategy, which
handles resolving internally. Therefore these features have
had very little testing together.
For the most part, merge-one-file just works with
GIT_WORK_TREE; most of its heavy lifting is done by plumbing
commands which do respect GIT_WORK_TREE properly. The one
exception is a shell redirection which touches the worktree
directly, writing results to the wrong place in the presence
of a GIT_WORK_TREE variable.
This means that merges won't even fail; they will silently
produce incorrect results, throwing out the entire "theirs"
side of files which need content-level merging!
This patch makes merge-one-file chdir to the toplevel of the
working tree (and exit if we don't have one). This most
closely matches the assumption made by the original script
(before separate work trees were invented), and matches what
happens when the script is called as part of a merge
strategy.
While we're at it, we'll also error-check the call to cat.
Merging a file in a subdirectory could in fact fail, as the
redirection relies on the "checkout-index" call just prior
to create leading directories. But we never noticed, since
we ignored the error return from running cat.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were no tests for either, except a brief use in
t1200-tutorial.
These tools are not used much these days, as most people
use the merge-recursive strategy, which handles everything
internally. However, they are used by the "octopus" and
"resolve" strategies, as well as any custom strategies
or merge scripts people have built around them.
For example, together with read-tree, they are the simplest
way to do a basic content-level merge without checking out
the entire repository contents beforehand.
This script adds a basic test of the tools to perform one
content-level merge. It also shows a failure of the tools to
work properly in the face of GIT_WORK_TREE or core.worktree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Arnaud Lacombe reported that with the recent change to reject overlapping
hunks fed to "git apply", the edit mode of an "add -p" session that lazily
feeds overlapping hunks without coalescing adjacent ones claim that the
patch does not apply. Expose the problem to be fixed.
Cf. http://thread.gmane.org/gmane.comp.version-control.git/170685/focus=171000
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/x-years-12-months:
date: avoid "X years, 12 months" in relative dates
|
|
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git rebase' uses 'git merge' to preserve merges (-p). This preserves
the original merge commit correctly, except when the original merge
commit was created by 'git merge --no-ff'. In this case, 'git rebase'
will fail to preserve the merge, because during 'git rebase', 'git
merge' will simply fast-forward and skip the commit. For example:
B
/ \
A---M
/
---o---O---P---Q
If we try to rebase M onto P, we lose the merge commit and this happens:
A---B
/
---o---O---P---Q
To correct this, we simply do a "no fast-forward" on all merge commits
when rebasing. Since by the time we decided to do a 'git merge' inside
'git rebase', it means there was a merge originally, so 'git merge'
should always create a merge commit regardless of what the merge
branches look like. This way, when rebase M onto P from the above
example, we get:
B
/ \
A---M
/
---o---O---P---Q
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If somebody has a name that includes an rfc822 special, we
will output it literally in the "From:" header. This is
usually OK, but certain characters (like ".") are supposed
to be enclosed in double-quotes in a mail header.
In practice, whether this matters may depend on your MUA.
Some MUAs will happily take in:
From: Foo B. Bar <author@example.com>
without quotes, and properly quote the "." when they send
the actual mail. Others may not, or may screw up harder
things like:
From: Foo "The Baz" Bar <author@example.com>
For example, mutt will strip the quotes, thinking they are
actual syntactic rfc822 quotes.
So let's quote properly, and then (if necessary) we still
apply rfc2047 encoding on top of that, which should make all
MUAs happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -u" updates the index with the updated contents from the working
tree by internally running "diff-files" to grab the set of paths that are
different from the index. Then it updates the index entries for the paths
that are modified in the working tree, and deletes the index entries for
the paths that are deleted in the working tree.
It ignored the output from the diff-files that indicated that a path is
unmerged. For these paths, it instead relied on the fact that an unmerged
path is followed by the result of comparison between stage #2 (ours) and
the working tree, and used that to update or delete such a path when it is
used to record the resolution of a conflict.
As the result, when a path did not have stage #2 (e.g. "we deleted while
the other side added"), these unmerged stages were left behind, instead of
recording what the user resolved in the working tree.
Since we recently fixed "diff-files" to indicate if the corresponding path
exists on the working tree for an unmerged path, we do not have to rely on
the comparison with stage #2 anymore. We can instead tell the diff-files
not to compare with higher stages, and use the unmerged output to update
the index to reflect the state of the working tree.
The changes to the test vector in t2200 illustrates the nature of the bug
and the fix. The test expected stage #1 and #3 entries be left behind,
but it was codifying the buggy behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, e9c8409 (diff-index --cached --raw: show tree entry on the LHS
for unmerged entries., 2007-01-05) taught the command to show the object
name and the mode from the entry coming from the tree side when comparing
a tree with an unmerged index.
This is a belated companion patch that teaches diff-files to show the mode
from the entry coming from the working tree side, when comparing an
unmerged index and the working tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When relative dates are more than about a year ago, we start
writing them as "Y years, M months". At the point where we
calculate Y and M, we have the time delta specified as a
number of days. We calculate these integers as:
Y = days / 365
M = (days % 365 + 15) / 30
This rounds days in the latter half of a month up to the
nearest month, so that day 16 is "1 month" (or day 381 is "1
year, 1 month").
We don't round the year at all, though, meaning we can end
up with "1 year, 12 months", which is silly; it should just
be "2 years".
Implement this differently with months of size
onemonth = 365/12
so that
totalmonths = (long)( (days + onemonth/2)/onemonth )
years = totalmonths / 12
months = totalmonths % 12
In order to do this without floats, we write the first formula as
totalmonths = (days*12*2 + 365) / (365*2)
Tests and inspiration by Jeff King.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
archive: document limitation of tar.umask config setting
t3306,t5304: avoid clock skew issues
git.txt: fix list continuation
|
|
On systems where the local time and file modification time may be out of
sync (e.g. test directory on NFS) t3306 and t5305 can fail because prune
compares times such as "now" (client time) with file modification times
(server times for remote file systems). I.e., these are spurious test
failures.
Avoid this by setting the relevant modification times to the local time.
Noticed on a system with as little as 2s time skew.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/checkout-untracked-symlink:
t2021: mark a test as fixed
|
|
When the index has conflicted submodules, mergetool used to mildly
clobber the module, renaming it to mymodule.BACKUP.nnnn, then failing to
copy it non-recursively.
Recognize submodules and offer a resolution instead:
Submodule merge conflict for 'Shared':
{local}: submodule commit ad9f12e3e6205381bf2163a793d1e596a9e211d0
{remote}: submodule commit f5893fb70ec5646efcd9aa643c5136753ac89253
Use (l)ocal or (r)emote, or (a)bort?
Selecting a commit will stage it, but not update the submodule (as git
does had there been no conflict). Type changes are also supported,
should the path be a submodule on one side, and a file, symlink,
directory, or deleted on the other.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/checkout-untracked-symlink:
t2021: mark a test as fixed
|
|
* nd/init-gitdir:
t0001: guard a new test with SYMLINKS prerequisite
|
|
The failure was fixed by the previous commit.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.
Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.
Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, when using --dirstat-by-file, it first does the full --dirstat
analysis (using diffcore_count_changes()), and then resets 'damage' to 1,
if any damage was found by diffcore_count_changes().
But --dirstat-by-file is not interested in the file damage per se. It only
cares if the file changed at all. In that sense it only cares if the blob
object for a file has changed. We therefore only need to compare the
object names of each file pair in the diff queue and we can skip the
entire --dirstat analysis and simply set 'damage' to 1 for each entry
where the object name has changed.
This makes --dirstat-by-file faster, and also bypasses --dirstat's practice
of ignoring rearranged lines within a file.
The patch also contains an added testcase verifying that --dirstat-by-file
now detects changes that only rearrange lines within a file.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also add a testcase documenting the current behavior.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't assume one comes after the other on the command line. Use a
three-state variable to track and check its value accordingly.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jonathan Nieder
Michael J Gruber
Junio C Hamano
Johan Herland
Brian Gernhardt
Jeff King
Josh Stone
Andrew Wong
Jonathon Mah
Johannes Sixt
Dan McGee