| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add some tests to demonstrate the current behavior around adding files
outside of the sparse-checkout cone. Currently, untracked files are
handled differently from tracked files. A future change will make these
cases be handled the same way.
Further expand checking that a failed 'git add' does not stage changes
to the index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests in t3705-add-sparse-checkout.sh check to see how 'git add'
behaves with paths outside the sparse-checkout definition. These
currently check to see if a given warning is present but not that the
index is not updated with the sparse entries. Add a new
'test_sparse_entry_unstaged' helper to be sure 'git add' is behaving
correctly.
We need to modify setup_sparse_entry to actually commit the sparse_entry
file so it exists at HEAD and as an entry in the index, but its exact
contents are not staged in the index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The hard work was already done with 'git merge' and the ORT strategy.
Just add extra tests to see that we get the expected results in the
non-conflict cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests to check that cherry-pick and rebase behave the same in the
sparse-index case as in the full index cases. These tests are agnostic
to GIT_TEST_MERGE_ALGORITHM, so a full CI test suite will check both the
'ort' and 'recursive' strategies on this test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Merge conflicts happen often enough to want to avoid expanding a sparse
index when they happen, as long as those conflicts are within the
sparse-checkout cone. If a conflict exists outside of the
sparse-checkout cone, then we still need to expand before iterating over
the index entries. This is critical to do in advance because of how the
original_cache_nr is tracked to allow inserting and replacing cache
entries.
Iterate over the conflicted files and check if any paths are outside of
the sparse-checkout cone. If so, then expand the full index.
Add a test that demonstrates that we do not expand the index, even when
we hit a conflict within the sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow 'git merge' to operate without expanding a sparse index, at least
not immediately. The index still will be expanded in a few cases:
1. If the merge strategy is 'recursive', then we enable
command_requires_full_index at the start of the merge_recursive()
method. We expect sparse-index users to also have the 'ort' strategy
enabled.
2. With the 'ort' strategy, if the merge results in a conflicted file,
then we expand the index before updating the working tree. The loop
that iterates over the worktree replaces index entries and tracks
'origintal_cache_nr' which can become completely wrong if the index
expands in the middle of the operation. This safety valve is
important before that loop starts. A later change will focus this
to only expand if we indeed have a conflict outside of the
sparse-checkout cone.
3. Other merge strategies are executed as a 'git merge-X' subcommand,
and those strategies are currently protected with the
'command_requires_full_index' guard.
Some test updates are required, including a mistaken 'git checkout -b'
that did not specify the base branch, causing merges to be fast-forward
merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When changing the scope of a sparse-checkout using cone mode, we might
have some tracked directories go out of scope. The current logic removes
the tracked files from within those directories, but leaves the ignored
files within those directories. This is a bit unexpected to users who
have given input to Git saying they don't need those directories
anymore.
This is something that is new to the cone mode pattern type: the user
has explicitly said "I want these directories and _not_ those
directories." The typical sparse-checkout patterns more generally apply
to "I want files with with these patterns" so it is natural to leave
ignored files as they are. This focus on directories in cone mode
provides us an opportunity to change the behavior.
Leaving these ignored files in the sparse directories makes it
impossible to gain performance benefits in the sparse index. When we
track into these directories, we need to know if the files are ignored
or not, which might depend on the _tracked_ .gitignore file(s) within
the sparse directory. This depends on the indexed version of the file,
so the sparse directory must be expanded.
We must take special care to look for untracked, non-ignored files in
these directories before deleting them. We do not want to delete any
meaningful work that the users were doing in those directories and
perhaps forgot to add and commit before switching sparse-checkout
definitions. Since those untracked files might be code files that
generated ignored build output, also do not delete any ignored files
from these directories in that case. The users can recover their state
by resetting their sparse-checkout definition to include that directory
and continue. Alternatively, they can see the warning that is presented
and delete the directory themselves to regain the performance they
expect.
By deleting the sparse directories when changing scope (or running 'git
sparse-checkout reapply') we regain these performance benefits as if the
repository was in a clean state.
Since these ignored files are frequently build output or helper files
from IDEs, the users should not need the files now that the tracked
files are removed. If the tracked files reappear, then they will have
newer timestamps than the build artifacts, so the artifacts will need to
be regenerated anyway.
Use the sparse-index as a data structure in order to find the sparse
directories that can be safely deleted. Re-expand the index to a full
one if it was full before.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse index is tested with the FS Monitor hook and extension since
f8fe49e (fsmonitor: integrate with sparse index, 2021-07-14). This test
was very fragile because it shared an index across sparse and non-sparse
behavior. Since that expansion and contraction could cause the index to
lose its FS Monitor bitmap and token, behavior is fragile to changes in
'git sparse-checkout set'.
Rewrite the test to use two clones of the original repo: full and
sparse. This allows us to also keep the test files (actual, expect,
trace2.txt) out of the repos we are testing with 'git status'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
|
|
* cb/t7508-regexp-fix:
t7508: avoid non POSIX BRE
|
|
* fc/disable-checkwinsize:
test: fix for COLUMNS and bash 5
|
|
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Windows rmdir() equivalent behaves differently from POSIX ones in
that when used on a symbolic link that points at a directory, the
target directory gets removed, which has been corrected.
* tb/mingw-rmdir-symlink-to-directory:
mingw: align symlinks-related rmdir() behavior with Linux
|
|
Portability test update.
* ab/getcwd-test:
t0001: fix broken not-quite getcwd(3) test in bed67874e2
|
|
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
|
|
Further optimization on "merge -sort" backend.
* en/ort-perf-batch-14:
merge-ort: restart merge with cached renames to reduce process entry cost
merge-ort: avoid recursing into directories when we don't need to
merge-ort: defer recursing into directories when merge base is matched
merge-ort: add a handle_deferred_entries() helper function
merge-ort: add data structures for allowable trivial directory resolves
merge-ort: add some more explanations in collect_merge_info_callback()
merge-ort: resolve paths early when we have sufficient information
|
|
"git checkout" and "git commit" learn to work without unnecessarily
expanding sparse indexes.
* ds/commit-and-checkout-with-sparse-index:
unpack-trees: resolve sparse-directory/file conflicts
t1092: document bad 'git checkout' behavior
checkout: stop expanding sparse indexes
sparse-index: recompute cache-tree
commit: integrate with sparse-index
p2000: compress repo names
p2000: add 'git checkout -' test and decrease depth
|
|
Rewrite of "git submodule" in C continues.
* ar/submodule-add:
submodule: drop unused sm_name parameter from show_fetch_remotes()
submodule--helper: introduce add-clone subcommand
submodule--helper: refactor module_clone()
submodule: prefix die messages with 'fatal'
t7400: test failure to add submodule in tracked path
|
|
When performing a rebase, rmdir() is called on the folder .git/logs. On
Unix rmdir() exits without deleting anything in case .git/logs is a
symbolic link but the equivalent functions on Windows (_rmdir, _wrmdir
and RemoveDirectoryW) do not behave the same and remove the folder if it
is symlinked even if it is not empty.
This creates issues when folders in .git/ are symlinks which is
especially the case when git-repo[1] is used: It replaces `.git/logs/`
with a symlink.
One such issue is that the _target_ of that symlink is removed e.g.
during a `git rebase`, where `delete_reflog("REBASE_HEAD")` will not
only try to remove `.git/logs/REBASE_HEAD` but then recursively try to
remove the parent directories until an error occurs, a technique that
obviously relies on `rmdir()` refusing to remove a symlink.
This was reported in https://github.com/git-for-windows/git/issues/2967.
This commit updates mingw_rmdir() so that its behavior is the same as
Linux rmdir() in case of symbolic links.
To verify that Git does not regress on the reported issue, this patch
adds a regression test for the `git rebase` symptom, even if the same
`rmdir()` behavior is quite likely to cause potential problems in other
Git commands as well.
[1]: git-repo is a python tool built on top of Git which helps manage
many Git repositories. It stores all the .git/ folders in a central
place by taking advantage of symbolic links.
More information: https://gerrit.googlesource.com/git-repo/
Signed-off-by: Thomas Bétous <tomspycell@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
24c30e0b6 (wt-status: tolerate dangling marks, 2020-09-01) adds a test
that uses a BRE which breaks at least with OpenBSD's grep.
switch to an ERE as it is done for similar checks and while at it, remove
the now obsolete test_i18ngrep call.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git read-tree" had a codepath where blobs are fetched one-by-one
from the promisor remote, which has been corrected to fetch in bulk.
* jt/bulk-prefetch:
cache-tree: prefetch in partial clone read-tree
unpack-trees: refactor prefetching code
|
|
"git bundle" gained more test coverage.
* ab/bundle-tests:
bundle tests: use test_cmp instead of grep
bundle tests: use ">file" not ": >file"
|
|
Test update.
* ps/perf-with-separate-output-directory:
perf: fix when running with TEST_OUTPUT_DIRECTORY
|
|
With a54e938e5b (strbuf: support long paths w/o read rights in
strbuf_getcwd() on FreeBSD, 2017-03-26) we had t0001 break on systems
like OpenBSD and AIX whose getcwd(3) has standard (but not like glibc
et al) behavior.
This was partially fixed in bed67874e2 (t0001: skip test with
restrictive permissions if getpwd(3) respects them, 2017-08-07).
The problem with that fix is that while its analysis of the problem is
correct, it doesn't actually call getcwd(3), instead it invokes "pwd
-P". There is no guarantee that "pwd -P" is going to call getcwd(3),
as opposed to e.g. being a shell built-in.
On AIX under both bash and ksh this test breaks because "pwd -P" will
happily display the current working directory, but getcwd(3) called by
the "git init" we're testing here will fail to get it.
I checked whether clobbering the $PWD environment variable would
affect it, and it didn't. Presumably these shells keep track of their
working directory internally.
There's possible follow-up work here in teaching strbuf_getcwd() to
get the working directory with whatever method "pwd" uses on these
platforms. See [1] for a discussion of that, but let's take the easy
way out here and just skip these tests by fixing the
GETCWD_IGNORES_PERMS prerequisite to match the limitations of
strbuf_getcwd().
1. https://lore.kernel.org/git/b650bef5-d739-d98d-e9f1-fa292b6ce982@web.de/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since b243012 (refresh_index(): add flag to ignore SKIP_WORKTREE
entries, 2021-04-08), 'git add --refresh <path>' will output a warning
message when the path is outside the sparse-checkout definition. The
implementation of this warning happened in parallel with the
sparse-index work to add ensure_full_index() calls throughout the
codebase.
Update this loop to have the proper logic that checks to see if the
pathspec is outside the sparse-checkout definition. This avoids the need
to expand the sparse directory entry and determine if the path is
tracked, untracked, or ignored. We simply avoid updating the stat()
information because there isn't even an entry that matches the path!
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add_pathspec_matches_against_index() focuses on matching a pathspec
to file entries in the index. This already works correctly for its only
use: checking if untracked files exist in the index.
The compatibility checks in t1092 already test that 'git add <dir>'
works for a directory outside of the sparse cone. That provides coverage
for removing this guard.
This finalizes our ability to run 'git add .' without expanding a sparse
index to a full one. This is evidenced by an update to t1092 and by
these performance numbers for p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.10: git add . (full-index-v3) 0.37(0.28+0.07) 0.36(0.27+0.06) -2.7%
2000.11: git add . (full-index-v4) 0.33(0.26+0.06) 0.32(0.28+0.05) -3.0%
2000.12: git add . (sparse-index-v3) 0.57(0.53+0.07) 0.06(0.06+0.07) -89.5%
2000.13: git add . (sparse-index-v4) 0.57(0.53+0.07) 0.05(0.03+0.09) -91.2%
While the ~90% improvement is shown by the test results, it is worth
noting that expanding the sparse index was adding overhead in previous
commits. Comparing to the full index case, we see the performance go
from 0.33s to 0.05s, an 85% improvement.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Disable command_requires_full_index for 'git add'. This does not require
any additional removals of ensure_full_index(). The main reason is that
'git add' discovers changes based on the pathspec and the worktree
itself. These are then inserted into the index directly, and calls to
index_name_pos() or index_file_exists() already call expand_to_path() at
the appropriate time to support a sparse-index.
Add a test to check that 'git add -A' and 'git add <file>' does not
expand the index at all, as long as <file> is not within a sparse
directory. This does not help the global 'git add .' case.
We can measure the improvement using p2000-sparse-operations.sh with
these results:
Test HEAD~1 HEAD
------------------------------------------------------------------------------
2000.6: git add -A (full-index-v3) 0.35(0.30+0.05) 0.37(0.29+0.06) +5.7%
2000.7: git add -A (full-index-v4) 0.31(0.26+0.06) 0.33(0.27+0.06) +6.5%
2000.8: git add -A (sparse-index-v3) 0.57(0.53+0.07) 0.05(0.04+0.08) -91.2%
2000.9: git add -A (sparse-index-v4) 0.58(0.55+0.06) 0.05(0.05+0.06) -91.4%
While the 91% improvement seems impressive, it's important to recognize
that previously we had significant overhead for expanding the
sparse-index. Comparing to the full index case, 'git add -A' goes from
0.37s to 0.05s, which is "only" an 86% improvement.
This modification to 'git add' creates some behavior change depending on
the use of a sparse index. We modify a test in t1092 to demonstrate
these changes which will be remedied in future changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conflicts can occur outside of the sparse-checkout definition, and in
that case users might try to resolve the conflicts in several ways.
Document a few of these ways in a test. Make it clear that this behavior
is not necessarily the optimal flow, since users can become confused
when Git deletes these files from the worktree in later commands.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"TEST_OUTPUT_DIRECTORY=there make test" failed to work, which has
been corrected.
* ps/t0000-output-directory-fix:
t0000: fix test if run with TEST_OUTPUT_DIRECTORY
|
|
The code that gives an error message in "git multi-pack-index" when
no subcommand is given tried to print a NULL pointer as a strong,
which has been corrected.
* tb/reverse-midx:
multi-pack-index: fix potential segfault without sub-command
|
|
The completion support used to offer alternate spelling of options
that exist only for compatibility, which has been corrected.
* pb/dont-complete-aliased-options:
parse-options: don't complete option aliases by default
|
|
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
|
|
Tests that cover protocol bits have been updated and helpers
used there have been consolidated.
* ab/pkt-line-tests:
test-lib-functions: use test-tool for [de]packetize()
|
|
Test fix.
* jk/t0000-subtests-fix:
t0000: clear GIT_SKIP_TESTS before running sub-tests
|
|
Many "printf"-like helper functions we have have been annotated
with __attribute__() to catch placeholder/parameter mismatches.
* ab/attribute-format:
advice.h: add missing __attribute__((format)) & fix usage
*.h: add a few missing __attribute__((format))
*.c static functions: add missing __attribute__((format))
sequencer.c: move static function to avoid forward decl
*.c static functions: don't forward-declare __attribute__
|
|
Optimize "git log" for cases where we wasted cycles to load ref
decoration data that may not be needed.
* jk/log-decorate-optim:
load_ref_decorations(): fix decoration with tags
add_ref_decoration(): rename s/type/deco_type/
load_ref_decorations(): avoid parsing non-tag objects
object.h: add lookup_object_by_type() function
object.h: expand docstring for lookup_unknown_object()
log: avoid loading decorations for userformats that don't need it
pretty.h: update and expand docstring for userformat_find_requirements()
|
|
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
|
|
Optimization for repositories with many alternate object store.
* ew/many-alternate-optim:
oidtree: a crit-bit tree for odb_loose_cache
oidcpy_with_padding: constify `src' arg
make object_directory.loose_objects_subdir_seen a bitmap
avoid strlen via strbuf_addstr in link_alt_odb_entry
speed up alt_odb_usable() with many alternates
|
|
"git commit --allow-empty-message" won't abort the operation upon
an empty message, but the hint shown in the editor said otherwise.
* hj/commit-allow-empty-message:
commit: remove irrelavent prompt on `--allow-empty-message`
commit: reorganise commit hint strings
|
|
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', once it is determined that
we have to create a merge commit, calls 'create_autostash' if
'--autostash' is given.
As explained in a03b55530a, and made more abvious by the tests added in
that commit, the autostash is then applied if the merge succeeds, either
directly or by committing (after conflict resolution or if '--no-commit'
was given), or if the merge is aborted with 'git merge --abort'. In some
other cases, like the user calling 'git reset --merge' or 'git merge
--quit', the autostash is not applied, but saved in the stash list.
However, there exists a scenario that creates an autostash but does not
apply nor save it to the stash list: if the chosen merge strategy
completely fails to handle the merge, i.e. 'try_merge_strategy' returns
2.
Apply the autostash in that case also. An easy way to test that is to
try to merge more than two commits but explicitely ask for the 'recursive'
merge strategy.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', in the fast-forward case,
calls 'create_autostash' before calling 'checkout_fast_forward' if
'--autostash' is given.
However, if 'checkout_fast_forward' fails, the autostash is not applied
to the working tree, nor saved in the stash list, since the code simply
calls 'goto done'.
Be more helpful to the user by applying the autostash in that case.
An easy way to test a failing fast-forward is when we are merging a
branch that has a tracked file that conflicts with an untracked file in
the working tree.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git read-tree" checks the existence of the blobs referenced by the
given tree, but does not bulk prefetch them. Add a bulk prefetch.
The lack of prefetch here was noticed at $DAYJOB during a merge
involving some specific commits, but I couldn't find a minimal merge
that didn't also trigger the prefetch in check_updates() in
unpack-trees.c (and in all these cases, the lack of prefetch in
cache-tree.c didn't matter because all the relevant blobs would have
already been prefetched by then). This is why I used read-tree here to
exercise this code path.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the bundle tests to fully compare the expected "git ls-remote"
or "git bundle list-heads" output, instead of merely grepping it.
This avoids subtle regressions in the tests. In
f62e0a39b6 (t5704 (bundle): add tests for bundle --stdin, 2010-04-19)
the "bundle --stdin <rev-list options>" test was added to make sure we
didn't include the tag.
But since the --stdin mode didn't work until 5bb0fd2cab (bundle:
arguments can be read from stdin, 2021-01-11) our grepping of
"master" (later "main") missed the important part of the test.
Namely that we should not include the "refs/tags/tag" tag in that
case. Since the test only grepped for "main" in the output we'd miss a
regression in that code.
So let's use test_cmp instead, and also in the other nearby tests
where it's easy.
This does make things a bit more verbose in the case of the test
that's checking the bundle header, since it's different under SHA1 and
SHA256. I think this makes test easier to follow.
I've got some WIP changes to extend the "git bundle" command to dump
parts of the header out, which are easier to understand if we test the
output explicitly like this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change uses of ":" on the LHS of a ">" to the more commonly used
">file" pattern in t/t5607-clone-bundle.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-list" learns to omit the "commit <object-name>" header
lines from the output with the `--no-commit-header` option.
* bc/rev-list-without-commit-line:
rev-list: add option for --pretty=format without header
|
|
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
|
|
When running unpack_trees() with a sparse index, we attempt to operate
on the index without expanding the sparse directory entries. Thus, we
operate by manipulating entire directories and passing them to the
unpack function. In the case of the 'git checkout' command, this is the
twoway_merge() function.
There are several cases in twoway_merge() that handle different
situations. One new one to add is the case of a directory/file conflict
where the directory is sparse. Before the sparse index, such a conflict
would appear as a list of file additions and deletions. Now,
twoway_merge() initializes 'current', 'oldtree', and 'newtree' from
src[0], src[1], and src[2], then sets 'oldtree' to NULL because it is
equal to the df_conflict_entry. The way to determine that we have a
directory/file conflict is to test that 'current' and 'newtree' disagree
on being sparse directory entries.
When we are in this case, we want to resolve the situation by calling
merged_entry(). This allows replacing the 'current' entry with the
'newtree' entry. This is important for cases where we want to run 'git
checkout' across the conflict and have the new HEAD represent the new
file type at that path. The first NEEDSWORK comment dropped in t1092
demonstrates this necessary behavior.
However, we still are in a confusing state when 'current' corresponds to
a staged change within a sparse directory that is not present at HEAD.
This should be atypical, because it requires adding a change outside of
the sparse-checkout cone, but it is possible. Since we are unable to
determine that this is a staged change within twoway_merge(), we cannot
add a case to reject the merge at this point. I believe this is due to
the use of df_conflict_entry in the place of 'oldtree' instead of using
the valud at HEAD, which would provide some perspective to this
decision. Any change that would allow this differentiation for staged
entries would need to involve information further up in unpack_trees().
That work should be done, sometime, because we are further confusing the
behavior of a directory/file conflict when staging a change in the
directory. The two cases 'checkout behaves oddly with df-conflict-?' in
t1092 demonstrate that even without a sparse-checkout, Git is not
consistent in its behavior. Neither of the two options seems correct,
either. This change makes the sparse-index behave differently than the
typcial sparse-checkout case, but it does match the full checkout
behavior in the df-conflict-2 case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new branches to the test repo that demonstrate directory/file
conflicts in different ways. Since the directory 'folder1/' has
adjacent files 'folder1-', 'folder1.txt', and 'folder10' it causes
searches for 'folder1/' to land in a different place in the index than a
search for 'folder1'. This causes a change in behavior when working with
the df-conflict-1 and df-conflict-2 branches, whose only difference is
that the first uses 'folder1' as the conflict and the other uses
'folder2' which does not have these adjacent files.
We can extend two tests that compare the behavior across different 'git
checkout' commands, and we see already that the behavior will be
different in some cases and not in others. The difference between the
two test loops is that one uses 'git reset --hard' between iterations.
Further, we isolate the behavior of creating a staged change within a
directory and then checking out a branch where that directory is
replaced with a file. A full checkout behaves differently across these
two cases, while a sparse-checkout cone behaves consistently. In both
cases, the behavior is wrong. In one case, the staged change is dropped
entirely. The other case the staged change is kept, replacing the file
at that location, but none of the other files in the directory are kept.
Likely, the correct behavior in this case is to reject the checkout and
report the conflict, leaving HEAD in its previous location. None of the
cases behave this way currently. Use comments to demonstrate that the
tested behavior is only a documentation of the current, incorrect
behavior to ensure we do not _accidentally_ change it. Instead, we would
prefer to change it on purpose with a future change.
At this point, the sparse-index does not handle these 'git checkout'
commands correctly. Or rather, it _does_ reject the 'git checkout' when
we have the staged change, but for the wrong reason. It also rejects the
'git checkout' commands when there is no staged change and we want to
replace a directory with a file. A fix for that unstaged case will
follow in the next change, but that will make the sparse-index agree
with the full checkout case in these documented incorrect behaviors.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The merge algorithm mostly consists of the following three functions:
collect_merge_info()
detect_and_process_renames()
process_entries()
Prior to the trivial directory resolution optimization of the last half
dozen commits, process_entries() was consistently the slowest, followed
by collect_merge_info(), then detect_and_process_renames(). When the
trivial directory resolution applies, it often dramatically decreases
the amount of time spent in the two slower functions.
Looking at the performance results in the previous commit, the trivial
directory resolution optimization helps amazingly well when there are no
relevant renames. It also helps really well when reapplying a long
series of linear commits (such as in a rebase or cherry-pick), since the
relevant renames may well be cached from the first reapplied commit.
But when there are any relevant renames that are not cached (represented
by the just-one-mega testcase), then the optimization does not help at
all.
Often, I noticed that when the optimization does not apply, it is
because there are a handful of relevant sources -- maybe even only one.
It felt frustrating to need to recurse into potentially hundreds or even
thousands of directories just for a single rename, but it was needed for
correctness.
However, staring at this list of functions and noticing that
process_entries() is the most expensive and knowing I could avoid it if
I had cached renames suggested a simple idea: change
collect_merge_info()
detect_and_process_renames()
process_entries()
into
collect_merge_info()
detect_and_process_renames()
<cache all the renames, and restart>
collect_merge_info()
detect_and_process_renames()
process_entries()
This may seem odd and look like more work. However, note that although
we run collect_merge_info() twice, the second time we get to employ
trivial directory resolves, which makes it much faster, so the increased
time in collect_merge_info() is small. While we run
detect_and_process_renames() again, all renames are cached so it's
nearly a no-op (we don't call into diffcore_rename_extended() but we do
have a little bit of data structure checking and fixing up). And the
big payoff comes from the fact that process_entries(), will be much
faster due to having far fewer entries to process.
This restarting only makes sense if we can save recursing into enough
directories to make it worth our while. Introduce a simple heuristic to
guide this. Note that this heuristic uses a "wanted_factor" that I have
virtually no actual real world data for, just some back-of-the-envelope
quasi-scientific calculations that I included in some comments and then
plucked a simple round number out of thin air. It could be that
tweaking this number to make it either higher or lower improves the
optimization. (There's slightly more here; when I first introduced this
optimization, I used a factor of 10, because I was completely confident
it was big enough to not cause slowdowns in special cases. I was
certain it was higher than needed. Several months later, I added the
rough calculations which make me think the optimal number is close to 2;
but instead of pushing to the limit, I just bumped it to 3 to reduce the
risk that there are special cases where this optimization can result in
slowing down the code a little. If the ratio of path counts is below 3,
we probably will only see minor performance improvements at best
anyway.)
Also, note that while the diffstat looks kind of long (nearly 100
lines), more than half of it is in two comments explaining how things
work.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 205.1 ms ± 3.8 ms 204.2 ms ± 3.0 ms
mega-renames: 1.564 s ± 0.010 s 1.076 s ± 0.015 s
just-one-mega: 479.5 ms ± 3.9 ms 364.1 ms ± 7.0 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Testcases in t0000 are quite special given that they many of them run
nested testcases to verify that testing functionality itself works as
expected. These nested testcases are realized by writing a new ad-hoc
test script which again sources test-lib.sh, where the new script is
created in a nested subdirectory located beneath the current trash
directory. We then execute the new test script with the nested
subdirectory as current working directory and explicitly re-export
TEST_OUTPUT_DIRECTORY to point to that directory.
While this works as expected in the general case, it falls apart when
the developer has TEST_OUTPUT_DIRECTORY explicitly defined either via
the environment or via config.mak and runs "make test". In that case,
test-lib.sh will clobber the value that we've just carefully set up to
instead contain what the developer has defined. As a result, the
TEST_OUTPUT_DIRECTORY continues to point at the root output directory,
not at the nested one.
This issue causes breakage in the 'test_atexit is run' test case: the
nested test case writes files into "../../", which is assumed to be the
parent's trash directory. But because TEST_OUTPUT_DIRECTORY already
points to to the root output directory, we instead end up writing those
files outside of the output directory. The parent test case will then
try to check whether those files still exist in its own trash directory,
which thus must fail now.
Fix the issue by adding a new TEST_OUTPUT_DIRECTORY_OVERRIDE variable.
If set, then we'll always override the TEST_OUTPUT_DIRECTORY with its
value after sourcing GIT-BUILD-OPTIONS.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Junio C Hamano
Felipe Contreras
Thomas Bétous
Carlo Marcelo Arenas Belón
Ævar Arnfjörð Bjarmason
Philippe Blain
Jonathan Tan
Elijah Newren
Patrick Steinhardt