| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
An earlier update to show the location of working tree in the error
message did not consider the possibility that a git command may be
run in a bare repository, which has been corrected.
* es/outside-repo-errmsg-hints:
prefix_path: show gitdir if worktree unavailable
|
|
If there is no worktree at present, we can still hint the user about
Git's current directory by showing them the absolute path to the Git
directory. Even though the Git directory doesn't make it as easy to
locate the worktree in question, it can still help a user figure out
what's going on while developing a script.
This fixes a segmentation fault introduced in e0020b2f
("prefix_path: show gitdir when arg is outside repo", 2020-02-14).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
[jc: added minimum tests, with help from Szeder Gábor]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Band-aid fixes for two fallouts from switching the default "rebase"
backend.
* en/rebase-backend:
git-rebase.txt: highlight backend differences with commit rewording
sequencer: clear state upon dropping a become-empty commit
i18n: unmark a message in rebase.c
|
|
In commit e98c4269c8 ("rebase (interactive-backend): fix handling of
commits that become empty", 2020-02-15), the merge backend was changed
to drop commits that did not start empty but became so after being
applied (because their changes were a subset of what was already
upstream). This new code path did not need to go through the process of
creating a commit, since we were dropping the commit instead.
Unfortunately, this also means we bypassed the clearing of the
CHERRY_PICK_HEAD and MERGE_MSG files, which if there were no further
commits to cherry-pick would mean that the rebase would end but assume
there was still an operation in progress. Ensure that we clear such
state files when we decide to drop the commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* ds/sparse-add:
t1091: don't grep for `strerror()` string
|
|
"git show" and others gave an object name in raw format in its
error output, which has been corrected to give it in hex.
* hd/show-one-mergetag-fix:
show_one_mergetag: print non-parent in hex form.
|
|
Test cleanup.
* en/test-cleanup:
t6020: new test with interleaved lexicographic ordering of directories
t6022, t6046: test expected behavior instead of testing a proxy for it
t3035: prefer test_must_fail to bash negation for git commands
t6020, t6022, t6035: update merge tests to use test helper functions
t602[1236], t6034: modernize test formatting
|
|
Handling of conflicting renames in merge-recursive have further
been made consistent with how existing codepaths try to mimic what
is done to add/add conflicts.
* en/merge-path-collision:
merge-recursive: apply collision handling unification to recursive case
|
|
Code cleanup.
* rj/t1050-use-test-path-is-file:
t1050: replace test -f with test_path_is_file
|
|
"git am --short-current-patch" is a way to show the piece of e-mail
for the stopped step, which is not suitable to directly feed "git
apply" (it is designed to be a good "git am" input). It learned a
new option to show only the patch part.
* pb/am-show-current-patch:
am: support --show-current-patch=diff to retrieve .git/rebase-apply/patch
am: support --show-current-patch=raw as a synonym for--show-current-patch
am: convert "resume" variable to a struct
parse-options: convert "command mode" to a flag
parse-options: add testcases for OPT_CMDMODE()
|
|
"git rm" and "git stash" learns the new "--pathspec-from-file"
option.
* am/pathspec-f-f-more:
stash push: support the --pathspec-from-file option
stash: eliminate crude option parsing
doc: stash: synchronize <pathspec> description
doc: stash: document more options
doc: stash: split options from description (2)
doc: stash: split options from description (1)
rm: support the --pathspec-from-file option
doc: rm: synchronize <pathspec> description
|
|
We grep for "File exists" in stderr of the failing `git sparse-checkout`
to make sure that it failed for the right reason. We expect the string
to show up there since we call `strerror(errno)` in
`unable_to_lock_message()` in lockfile.c.
On the NonStop platform, this fails because the error string is "File
already exists", which doesn't match our grepping.
See 9042140097 ("test-dir-iterator: do not assume errno values",
2019-07-30) for a somewhat similar fix. There, we patched a test helper,
which meant we had access to `errno` and could investigate it better in
the test helper instead of just outputting the numerical value and
evaluating it in the test script. The current situation is different,
since (short of modifying the lockfile machinery, e.g., to be more
verbose) we don't have more than the output from `strerror()` available.
Except we do: We prefix `strerror(errno)` with `_("Unable to create
'%s.lock': ")`. Let's grep for that part instead. It verifies that we
were indeed unable to create the lock file. (If that fails for some
other reason than the file existing, we really really should expect
other tests to fail as well.)
An alternative fix would be to loosen the expression a bit and grep for
"File.* exists" instead. There would be no guarantee that some other
implementation couldn't come up with another error string, That is, that
could be the first move in an endless game of whack-a-mole. Of course,
it could also take us from "99" to "100" percent of the platforms and
we'd never have this problem again. But since we have another way of
addressing this, let's not even try the "loosen it up a bit" strategy.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently switched to using Perl instead of `sed` in the httpd-based
tests. Let's reflect that in the label we give the corresponding commit
hashes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to the CI settings.
* js/ci-windows-update:
Azure Pipeline: switch to the latest agent pools
ci: prevent `perforce` from being quarantined
t/lib-httpd: avoid using macOS' sed
|
|
"git describe" in a repository with multiple root commits sometimes
gave up looking for the best tag to describe a given commit with
too early, which has been adjusted.
* be/describe-multiroot:
describe: don't abort too early when searching tags
|
|
"git clone --recurse-submodules --single-branch" now uses the same
single-branch option when cloning the submodules.
* es/recursive-single-branch-clone:
clone: pass --single-branch during --recurse-submodules
submodule--helper: use C99 named initializer
|
|
"git rebase BASE BRANCH" rebased/updated the tip of BRANCH and
checked it out, even when the BRANCH is checked out in a different
worktree. This has been corrected.
* es/do-not-let-rebase-switch-to-protected-branch:
rebase: refuse to switch to branch already checked out elsewhere
t3400: make test clean up after itself
|
|
"git push" should stop from updating a branch that is checked out
when receive.denyCurrentBranch configuration is set, but it failed
to pay attention to checkouts in secondary worktrees. This has
been corrected.
* hv/receive-denycurrent-everywhere:
t2402: test worktree path when called in .git directory
receive.denyCurrentBranch: respect all worktrees
t5509: use a bare repository for test push target
get_main_worktree(): allow it to be called in the Git directory
|
|
In rare cases "git worktree add <path>" could think that <path>
was already a registered worktree even when it wasn't and refuse
to add the new worktree. This has been corrected.
* es/worktree-avoid-duplication-fix:
worktree: don't allow "add" validation to be fooled by suffix matching
worktree: add utility to find worktree by pathname
worktree: improve find_worktree() documentation
|
|
A configuration element used for credential subsystem can now use
wildcard pattern to specify for which set of URLs the entry
applies.
* bc/wildcard-credential:
credential: allow wildcard patterns when matching config
credential: use the last matching username in the config
t0300: add tests for some additional cases
t1300: add test for urlmatch with multiple wildcards
mailmap: add an additional email address for brian m. carlson
|
|
"git sparse-checkout" learned a new "add" subcommand.
* ds/sparse-add:
sparse-checkout: allow one-character directories in cone mode
sparse-checkout: work with Windows paths
sparse-checkout: create 'add' subcommand
sparse-checkout: extract pattern update from 'set' subcommand
sparse-checkout: extract add_patterns_from_input()
|
|
The bug which reports an extra `/.git/.` in worktree path when called in
'.git' directory already has been fixed. But unfortunately, the regression
test to ensure this behavior has been forgotten.
Here is that test.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ma/test-cleanup:
t: drop debug `cat` calls
t9810: drop debug `cat` call
t4117: check for files using `test_path_is_file`
|
|
Code cleanup.
* rs/micro-cleanups:
use strpbrk(3) to search for characters from a given set
quote: use isalnum() to check for alphanumeric characters
|
|
Test update.
* ak/test-log-graph:
lib-log-graph: consolidate colored graph cmp logic
lib-log-graph: consolidate test_cmp_graph logic
|
|
Fix for a bug revealed by a recent change to make the protocol v2
the default.
* ds/partial-clone-fixes:
partial-clone: avoid fetching when looking for objects
partial-clone: demonstrate bugs in partial fetch
|
|
The merge-recursive machinery failed to refresh the cache entry for
a merge result in a couple of places, resulting in an unnecessary
merge failure, which has been fixed.
* en/t3433-rebase-stat-dirty-failure:
merge-recursive: fix the refresh logic in update_file_flags
t3433: new rebase testcase documenting a stat-dirty-like failure
|
|
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
|
|
"git check-ignore" did not work when the given path is explicitly
marked as not ignored with a negative entry in the .gitignore file.
* en/check-ignore:
check-ignore: fix documentation and implementation to match
|
|
The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
|
|
When a mergetag names a non-parent, which can occur after a shallow
clone, its hash was previously printed as raw data. Print it in hex form
instead.
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a repository has two files:
foo/bar/baz
foo/bar-2/baz
then a simple lexicographic ordering of files and directories shows
...
foo/bar
foo/bar-2
foo/bar/baz
...
and the appearance of foo/bar-2 between foo/bar and foo/bar/baz can trip
up some codepaths. Add a test to catch such cases.
t6020 might be a slight misfit since this testcase does not test any
kind of file/directory conflict. However, it is similar in spirit to
some tests (4-6) already in t6020 that check cases where a *file* sorted
between a directory and the files underneath that directory. This
testcase differs in that now there is a *directory* that sorts in the
middle.
Although merge-recursive currently has no problems with this simple
testcase, I discovered that it's very possible to accidentally mess it
up. Further, we have no other merge or cherry-pick or rebase testcases
in the entire testsuite that cover such a case, so I felt like it would
be a worthwhile addition to the testsuite.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t6022, we were testing for file being overwritten (or not) based on
an output message instead of checking for the file being overwritten.
Since we can check for the file being overwritten via mtime updates,
check that instead.
In t6046, we were largely checking for both the expected behavior and a
proxy for it, which is unnecessary. The calls to test-tool also were a
bit cryptic. Make them a little clearer.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make use of test_path_is_file, test_write_lines, and similar helpers
in these old test files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Indent code, and include it inside test_expect* blocks.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the en/merge-path-collision topic (see commit ac193e0e0aa5, "Merge
branch 'en/merge-path-collision'", 2019-01-04), all the "file collision"
conflict types were modified for consistency. In particular,
rename/add, rename/rename(2to1) and each rename/add piece of a
rename/rename(1to2)/add[/add] conflict were made to behave like add/add
conflicts have always been handled.
However, this consistency was not enforced when opt->priv->call_depth >
0 for rename/rename conflicts. Update rename/rename(1to2) and
rename/rename(2to1) conflicts in the recursive case to also be
consistent. As an added bonus, this simplifies the code considerably.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Among other differences relative to GNU sed, macOS' sed always ends its
output with a trailing newline, even if the input did not have such a
trailing newline.
Surprisingly, this makes three httpd-based tests fail on macOS: t5616,
t5702 and t5703. ("Surprisingly" because those tests have been around
for some time, but apparently nobody runs them on macOS with a working
Apache2 setup.)
The reason is that we use `sed` in those tests to filter the response of
the web server. Apart from the fact that we use GNU constructs (such as
using a space after the `c` command instead of a backslash and a
newline), we have another problem: macOS' sed LF-only newlines while
webservers are supposed to use CR/LF ones.
Even worse, t5616 uses `sed` to replace a binary part of the response
with a new binary part (kind of hoping that the replaced binary part
does not contain a 0x0a byte which would be interpreted as a newline).
To that end, it calls on Perl to read the binary pack file and
hex-encode it, then calls on `sed` to prefix every hex digit pair with a
`\x` in order to construct the text that the `c` statement of the `sed`
invocation is supposed to insert. So we call Perl and sed to construct a
sed statement. The final nail in the coffin is that macOS' sed does not
even interpret those `\x<hex>` constructs.
Let's just replace all of that by Perl snippets. With Perl, at least, we
do not have to deal with GNU vs macOS semantics, we do not have to worry
about unwanted trailing newlines, and we do not have to spawn commands
to construct arguments for other commands to be spawned (i.e. we can
avoid a whole lot of shell scripting complexity).
The upshot is that this fixes t5616, t5702 and t5703 on macOS with
Apache2.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When searching the commit graph for tag candidates, `git-describe`
will stop as soon as there is only one active branch left and
it already found an annotated tag as a candidate.
This works well as long as all branches eventually connect back
to a common root, but if the tags are found across branches
with no common ancestor
B
o----.
\
o-----o---o----x
A
it can happen that the search on one branch terminates prematurely
because a tag was found on another, independent branch. This scenario
isn't quite as obscure as it sounds, since cloning with a limited
depth often introduces many independent "dead ends" into the commit
graph.
The help text of `git-describe` states pretty clearly that when
describing a commit D, the number appended to the emitted tag X should
correspond to the number of commits found by `git log X..D`.
Thus, this commit modifies the stopping condition to only abort
the search when only one branch is left to search *and* all current
best candidates are descendants from that branch.
For repositories with a single root, this condition is always
true: When the search is reduced to a single active branch, the
current commit must be an ancestor of *all* tag candidates. This
means that in the common case, this change will have no negative
performance impact since the same number of commits as before will
be traversed.
Signed-off-by: Benno Evers <benno@bmevers.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The basic 7 colors learned the brighter counterparts
(e.g. "brightred").
* es/bright-colors:
color.c: alias RGB colors 8-15 to aixterm colors
color.c: support bright aixterm colors
color.c: refactor color_output arguments
|
|
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
|
|
Previously, performing "git clone --recurse-submodules --single-branch"
resulted in submodules cloning all branches even though the superproject
cloned only one branch. Pipe --single-branch through the submodule
helper framework to make it to 'clone' later on.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Log graph comparision logic is duplicated many times in:
- t3430-rebase-merges.sh
- t4202-log.sh
- t4214-log-graph-octopus.sh
- t4215-log-skewed-merges.sh
Consolidate the core of the comparision and sanitization logic in
lib-log-graph, and use it to replace the existing tests.
While at it, lose the singular/plural transition magic from the
sanitize_output helper, which was necessary around 7f814632 ("Use
correct grammar in diffstat summary line", 2012-02-01), that has
long outlived its usefulness.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree add <path>" performs various checks before approving
<path> as a valid location for the new worktree. Aside from ensuring
that <path> does not already exist, one of the questions it asks is
whether <path> is already a registered worktree. To perform this check,
it queries find_worktree() and disallows the "add" operation if
find_worktree() finds a match for <path>. As a convenience, however,
find_worktree() casts an overly wide net to allow users to identify
worktrees by shorthand in order to keep typing to a minimum. For
instance, it performs suffix matching which, given subtrees "foo/bar"
and "foo/baz", can correctly select the latter when asked only for
"baz".
"add" validation knows the exact path it is interrogating, so this sort
of heuristic-based matching is, at best, questionable for this use-case
and, at worst, may may accidentally interpret <path> as matching an
existing worktree and incorrectly report it as already registered even
when it isn't. (In fact, validate_worktree_add() already contains a
special case to avoid accidentally matching against the main worktree,
precisely due to this problem.)
Avoid the problem of potential accidental matching against an existing
worktree by instead taking advantage of find_worktree_by_path() which
matches paths deterministically, without applying any sort of magic
shorthand matching performed by find_worktree().
Reported-by: Cameron Gunnin <cameron.gunnin@synopsys.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The invocation "git rebase <upstream> <branch>" switches to <branch>
before performing the rebase operation. However, unlike git-switch,
git-checkout, and git-worktree which all refuse to switch to a branch
that is already checked out in some other worktree, git-rebase switches
to <branch> unconditionally. Curb this careless behavior by making
git-rebase also refuse to switch to a branch checked out elsewhere.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test intentionally creates a file which causes rebase to fail, thus
it is important that this file be deleted before subsequent tests are
run which are not expecting such a failure. In the past, the common way
to ensure cleanup (regardless of whether the test succeeded or failed)
was either for the next test to perform the previous test's cleanup as
its first step or to do the cleanup at global scope outside of any
tests. With the introduction of 'test_when_finished', however, tests can
be responsible for their own cleanup. Therefore, update this test to
clean up after itself.
A bit of history: This 'rm' invocation was moved from within the body of
the following test to global scope by bffd750adf (rebase: improve error
message when upstream argument is missing, 2010-05-31), which postdates,
by about a month, introduction of 'test_when_finished' in 3bf7886705
(test-lib: Let tests specify commands to be run at end of test,
2010-05-02).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We `cat` files, but don't inspect or grab the contents in any way.
Unlike in an earlier commit, there is no reason to suspect that these
files could be missing, so `cat`-ing them is just wasted effort.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We `cat` kwdelfile.c, but don't inspect or grab the contents in any way.
This looks like a remnant from a debug session. Similar to the previous
commit, one could argue that `cat`-ing the file verifies that it didn't
disappear somehow. But because the very next thing we do after `cat`-ing
the file is to `grep` in it, we can safely drop the call to `cat`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We `cat` files, but don't inspect or grab the contents in any way. These
`cat` calls look like remnants from a debug session, so it's tempting to
get rid of them. But they do actually verify that the files exist, which
might not necessarily be the case for some failure modes of `git apply
--reject`. Let's not lose that.
Convert the `cat` calls to use `test_path_is_file` instead. This is of
course still a minor change since we no longer verify that the files can
be opened for reading, but that is not something we usually worry about.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Emily Shaffer
Elijah Newren
Martin Ågren
Johannes Schindelin
Hariom Verma
Harald van Dijk
Benno Evers
Abhishek Kumar
Eric Sunshine