| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Our ref resolution first runs lstat() on any path we try to
look up, because we want to treat symlinks specially (by
resolving them manually and considering them symrefs). But
if the results of `readlink` do _not_ look like a ref, we
fall through to treating it like a normal file, and just
read the contents of the linked path.
Since fcb7c76 (resolve_ref_unsafe(): close race condition
reading loose refs, 2013-06-19), that "normal file" code
path will stat() the file and if we see ENOENT, will jump
back to the lstat(), thinking we've seen inconsistent
results between the two calls. But for a symbolic ref, this
isn't a race: the lstat() found the symlink, and the stat()
is looking at the path it points to. We end up in an
infinite loop calling lstat() and stat().
We can fix this by avoiding the retry-on-inconsistent jump
when we know that we found a symlink. While we're at it,
let's add a comment explaining why the symlink case gets to
this code in the first place; without that, it is not
obvious that the correct solution isn't to avoid the stat()
code path entirely.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pack-objects --include-tag" was taught that when we know that
we are sending an object C, we want a tag B that directly points at
C but also a tag A that points at the tag B. We used to miss the
intermediate tag B in some cases.
* jk/pack-tag-of-tag:
pack-objects: walk tag chains for --include-tag
t5305: simplify packname handling
t5305: use "git -C"
t5305: drop "dry-run" of unpack-objects
t5305: move cleanup into test block
|
|
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
|
|
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
|
|
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
|
|
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
|
|
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
|
|
"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient. The base information
has been moved above the signature line.
* jt/format-patch-base-info-above-sig:
format-patch: show base info before email signature
|
|
Performance tests done via "t/perf" did not use the same set of
build configuration if the user relied on autoconf generated
configuration.
* ks/perf-build-with-autoconf:
t/perf/run: copy config.mak.autogen & friends to build area
|
|
"git diff -W" output needs to extend the context backward to
include the header line of the current function and also forward to
include the body of the entire current function up to the header
line of the next one. This process may have to merge to adjacent
hunks, but the code forgot to do so in some cases.
* rs/xdiff-merge-overlapping-hunks-for-W-context:
xdiff: fix merging of hunks with -W context and -u context
|
|
"git fetch http::/site/path" did not die correctly and segfaulted
instead.
* jk/fix-remote-curl-url-wo-proto:
remote-curl: handle URLs without protocol
|
|
A recently introduced test checks the result of 'git status' after
setting the executable bit on a file. This check does not yield the
expected result when the filesystem does not support the executable
bit.
What we care about is that a file added with "--chmod=+x" has
executable bit in the index and that "--chmod=+x" (or any other
options for that matter) does not muck with working tree files.
The former is tested by other existing tests, so let's check the
latter more explicitly and only under POSIXPERM prerequisite.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new regexec_buf() function operates on buffers with an explicitly
specified length, rather than NUL-terminated strings.
We need to use this function whenever the buffer we want to pass to
regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated).
Note: the original motivation for this patch was to fix a bug where
`git diff -G <regex>` would crash. This patch converts more callers,
though, some of which allocated to construct NUL-terminated strings,
or worse, modified buffers to temporarily insert NULs while calling
regexec(3). By converting them to use regexec_buf(), the code has
become much cleaner.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When our pickaxe code feeds file contents to regexec(), it implicitly
assumes that the file contents are read into implicitly NUL-terminated
buffers (i.e. that we overallocate by 1, appending a single '\0').
This is not so.
In particular when the file contents are simply mmap()ed, we can be
virtually certain that the buffer is preceding uninitialized bytes, or
invalid pages.
Note that the test we add here is known to be flakey: we simply cannot
know whether the byte following the mmap()ed ones is a NUL or not.
Typically, on Linux the test passes. On Windows, it fails virtually
every time due to an access violation (that's a segmentation fault for
you Unix-y people out there). And Windows would be correct: the
regexec() call wants to operate on a regular, NUL-terminated string,
there is no NUL in the mmap()ed memory range, and it is undefined
whether the next byte is even legal to access.
When run with --valgrind it demonstrates quite clearly the breakage, of
course.
Being marked with `test_expect_failure`, this test will sometimes be
declare "TODO fixed", even if it only passes by mistake.
This test case represents a Minimal, Complete and Verifiable Example of
a breakage reported by Chris Sidi.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The subdirectory 'sub' is created early in the test file. Later, a test
case removes it during its clean-up actions. However, this test case is
protected by POSIXPERM. Consequently, 'sub' remains when the POSIXPERM
prerequisite is not satisfied. Later, a recently introduced test case
creates 'sub' again. Use -p with mkdir so that it does not fail if 'sub'
already exists.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The two functions in parse_branchname_arg(), verify_non_filename and
check_filename, need correct prefix in order to reconstruct the paths
and check for their existence. With NULL prefix, they just check paths
at top dir instead.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* js/t9903-chaining:
t9903: fix broken && chain
|
|
Update a few tests that used to use GIT_CURL_VERBOSE to use the
newer GIT_TRACE_CURL.
* ep/use-git-trace-curl-in-tests:
t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var
t5550-http-fetch-dumb.sh: use the GIT_TRACE_CURL environment var
test-lib.sh: preserve GIT_TRACE_CURL from the environment
t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var
|
|
A test spawned a short-lived background process, which sometimes
prevented the test directory from getting removed at the end of the
script on some platforms.
* js/t6026-clean-up:
t6026-merge-attr: clean up background process at end of test case
|
|
"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one. Teach the command
to forbid removal of HEAD.
* jc/forbid-symbolic-ref-d-HEAD:
symbolic-ref -d: do not allow removal of HEAD
|
|
Having a submodule whose ".git" repository is somehow corrupt
caused a few commands that recurse into submodules loop forever.
* jc/submodule-anchor-git-dir:
submodule: avoid auto-discovery in prepare_submodule_repo_env()
|
|
The test framework left the number of tests and success/failure
count in the t/test-results directory, keyed by the name of the
test script plus the process ID. The latter however turned out not
to serve any useful purpose. The process ID part of the filename
has been removed.
* jk/test-lib-drop-pid-from-results:
test-lib: drop PID from test-results/*.count
|
|
Otherwise for people who use autotools-based configure in main worktree,
the performance testing results will be inconsistent as work and build
trees could be using e.g. different optimization levels.
See e.g.
http://public-inbox.org/git/20160818175222.bmm3ivjheokf2qzl@sigill.intra.peff.net/
for example.
NOTE config.status has to be copied because otherwise without it the build
would want to run reconfigure this way loosing just copied config.mak.autogen.
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the chmod option was added to git add, it was hooked up to the diff
machinery, meaning that it only works when the version in the index
differs from the version on disk.
As the option was supposed to mirror the chmod option in update-index,
which always changes the mode in the index, regardless of the status of
the file, make sure the option behaves the same way in git add.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Any text below the "-- " for the email signature gets treated as part of
the signature, and many mail clients will trim it from the quoted text
for a reply. Move it above the signature, so people can reply to it
more easily.
Similarly, when producing the patch as a MIME attachment, the
original code placed the base info after the attached part, which
would be discarded. Move the base info to the end of the part,
still inside the part boundary.
Add tests for the exact format of the email signature, and add tests
to ensure that the base info appears before the email signature when
producing a plain-text output, and that it appears before the part
boundary when producing a MIME attachment.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the function context for a hunk (with -W) reaches the beginning of
the next hunk then we need to merge these two -- otherwise we'd show
some lines twice, which looks strange and even confuses git apply. We
already do this checking and merging in xdl_emit_diff(), but forget to
consider regular context (with -u or -U).
Fix that by merging hunks already if function context of the first one
touches or overlaps regular context of the second one.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently there is no test checking the expected behaviour when multiple
chmod flags with different arguments are passed. As argument handling
is not in line with other git commands it's easy to miss and
accidentally change the current behaviour.
While there, fix the argument type of chmod_path, which takes an int,
but had a char passed in.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A small test clean-up for a topic introduced in v2.9.1 and later.
* sg/reflog-past-root:
t1410: remove superfluous 'git reflog' from the 'walk past root' test
|
|
The tempfile (hence its user lockfile) API lets the caller to open
a file descriptor to a temporary file, write into it and then
finalize it by first closing the filehandle and then either
removing or renaming the temporary file. When the process spawns a
subprocess after obtaining the file descriptor, and if the
subprocess has not exited when the attempt to remove or rename is
made, the last step fails on Windows, because the subprocess has
the file descriptor still open. Open tempfile with O_CLOEXEC flag
to avoid this (on Windows, this is mapped to O_NOINHERIT).
* bw/mingw-avoid-inheriting-fd-to-lockfile:
mingw: ensure temporary file handles are not inherited by child processes
t6026-merge-attr: child processes must not inherit index.lock handles
|
|
"git difftool" by default ignores the error exit from the backend
commands it spawns, because often they signal that they found
differences by exiting with a non-zero status code just like "diff"
does; the exit status codes 126 and above however are special in
that they are used to signal that the command is not executable,
does not exist, or killed by a signal. "git difftool" has been
taught to notice these exit status codes.
* jk/difftool-command-not-found:
difftool: always honor fatal error exit codes
|
|
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
|
|
When "git merge-recursive" works on history with many criss-cross
merges in "verbose" mode, the names the command assigns to the
virtual merge bases could have overwritten each other by unintended
reuse of the same piece of memory.
* rs/pull-signed-tag:
commit: use FLEX_ARRAY in struct merge_remote_desc
merge-recursive: fix verbose output for multiple base trees
commit: factor out set_merge_remote_desc()
commit: use xstrdup() in get_merge_parent()
|
|
The "t/" hierarchy is prone to get an unusual pathname; "make test"
has been taught to make sure they do not contain paths that cannot
be checked out on Windows (and the mechanism can be reusable to
catch pathnames that are not portable to other platforms as need
arises).
* js/test-lint-pathname:
t/Makefile: ensure that paths are valid on platforms we care
|
|
"git push --force-with-lease" already had enough logic to allow
ensuring that such a push results in creation of a ref (i.e. the
receiving end did not have another push from sideways that would be
discarded by our force-pushing), but didn't expose this possibility
to the users. It does so now.
* jk/push-force-with-lease-creation:
t5533: make it pass on case-sensitive filesystems
push: allow pushing new branches with --force-with-lease
push: add shorthand for --force-with-lease branch creation
Documentation/git-push: fix placeholder formatting
|
|
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
|
|
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
|
|
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
|
|
Generally remote-curl would never see a URL that did not
have "proto:" at the beginning, as that is what tells git to
run the "git-remote-proto" helper (and git-remote-http, etc,
are aliases for git-remote-curl).
However, the special syntax "proto::something" will run
git-remote-proto with only "something" as the URL. So a
malformed URL like:
http::/example.com/repo.git
will feed the URL "/example.com/repo.git" to
git-remote-http. The resulting URL has no protocol, but the
code added by 372370f (http: use credential API to handle
proxy authentication, 2016-01-26) does not handle this case
and segfaults.
For the purposes of this code, we don't really care what the
exact protocol; only whether or not it is https. So let's
just assume that a missing protocol is not, and curl will
handle the real error (which is that the URL is nonsense).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we found bad instruction lines in the instruction sheet
of interactive rebase, we give the user advice on how to
fix it. However, we don't tell the user what to do afterwards.
Give the user advice to run 'git rebase --continue' after
the fix.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pack-objects is given --include-tag, it peels each tag
ref down to a non-tag object, and if that non-tag object is
going to be packed, we include the tag, too. But what
happens if we have a chain of tags (e.g., tag "A" points to
tag "B", which points to commit "C")?
We'll peel down to "C" and realize that we want to include
tag "A", but we do not ever consider tag "B", leading to a
broken pack (assuming "B" was not otherwise selected).
Instead, we have to walk the whole chain, adding any tags we
find to the pack.
Interestingly, it doesn't seem possible to trigger this
problem with "git fetch", but you can with "git clone
--single-branch". The reason is that we generate the correct
pack when the client explicitly asks for "A" (because we do
a real reachability analysis there), and "fetch" is more
willing to do so. There are basically two cases:
1. If "C" is already a ref tip, then the client can deduce
that it needs "A" itself (via find_non_local_tags), and
will ask for it explicitly rather than relying on the
include-tag capability. Everything works.
2. If "C" is not already a ref tip, then we hope for
include-tag to send us the correct tag. But it doesn't;
it generates a broken pack. However, the next step is
to do a follow-up run of find_non_local_tags(),
followed by fetch_refs() to backfill any tags we
learned about.
In the normal case, fetch_refs() calls quickfetch(),
which does a connectivity check and sees we have no
new objects to fetch. We just write the refs.
But for the broken-pack case, the connectivity check
fails, and quickfetch will follow-up with the remote,
asking explicitly for each of the ref tips. This picks
up the missing object in a new pack.
For a regular "git clone", we are similarly OK, because we
explicitly request all of the tag refs, and get a correct
pack. But with "--single-branch", we kick in tag
auto-following via "include-tag", but do _not_ do a
follow-up backfill. We just take whatever the server sent us
via include-tag and write out tag refs for any tag objects
we were sent. So prior to c6807a4 (clone: open a shortcut
for connectivity check, 2013-05-26), we actually claimed the
clone was a success, but the result was silently
corrupted! Since c6807a4, index-pack's connectivity
check catches this case, and we correctly complain.
The included test directly checks that pack-objects does not
generate a broken pack, but also confirms that "clone
--single-branch" does not hit the bug.
Note that tag chains introduce another interesting question:
if we are packing the tag "B" but not the commit "C", should
"A" be included?
Both before and after this patch, we do not include "A",
because the initial peel_ref() check only knows about the
bottom-most level, "C". To realize that "B" is involved at
all, we would have to switch to an incremental peel, in
which we examine each tagged object, asking if it is being
packed (and including the outer tag if so).
But that runs contrary to the optimizations in peel_ref(),
which avoid accessing the objects at all, in favor of using
the value we pull from packed-refs. It's OK to walk the
whole chain once we know we're going to include the tag (we
have to access it anyway, so the effort is proportional to
the pack we're generating). But for the initial selection,
we have to look at every ref. If we're only packing a few
objects, we'd still have to parse every single referenced
tag object just to confirm that it isn't part of a tag
chain.
This could be addressed if packed-refs stored the complete
tag chain for each peeled ref (in most cases, this would be
the same cost as now, as each "chain" is only a single
link). But given the size of that project, it's out of scope
for this fix (and probably nobody cares enough anyway, as
it's such an obscure situation). This commit limits itself
to just avoiding the creation of a broken pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We generate a series of packfiles test-1-$pack,
test-2-$pack, with different properties and then examine
them. However we always store the packname generated by
pack-objects in the variable packname_1. This probably was
meant to be packname_2 in the second test, but it turns out
that it doesn't matter: once we are done with the first
pack, we can just keep using the same $packname variable.
So let's drop the confusing "_1" parameter. At the same
time, let's give test-1 and test-2 more descriptive names,
which can help keep them straight (note that we _could_
likewise overwrite the packfiles in each test, but by using
separate filenames, we are sure that test 2 does not
accidentally use the packfile from test 1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test unpacks objects into a separate repository, and
accesses it by setting GIT_DIR in a subshell. We can do the
same thing these days by using "git init <repo>" and "git
-C". In most cases this is shorter, though when there are
multiple commands, we may end up repeating the "-C".
However, this repetition can actually be a good thing. This
patch also fixes a bug introduced by 512477b (tests: use
"env" to run commands with temporary env-var settings,
2014-03-18). That commit essentially converted:
(GIT_DIR=...; export GIT_DIR
cmd1 &&
cmd2)
into:
(GIT_DIR=... cmd1 &&
cmd2)
which obviously loses the GIT_DIR setting for cmd2 (we never
noticed the bug because it simply runs "cmd2" in the parent
repo, which means we were simply failing to test anything
interesting). By using "git -C" rather than a subshell, it
becomes quite obvious where each command is supposed to be
running.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For each test we do a dry-run of unpack-objects, followed by
a real run, followed by confirming that it contained the
objects we expected. The dry-run is telling us nothing, as
any errors it encounters would be found in the real run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We usually try to avoid doing any significant actions
outside of test blocks. Although "rm -rf" is unlikely to
either fail or to generate output, moving these to the
point of use makes it more clear that they are part of the
overall setup of "clone.git".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new GIT_TRACE_CURL environment variable instead
of the deprecated GIT_CURL_VERBOSE.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new GIT_TRACE_CURL environment variable instead
of the deprecated GIT_CURL_VERBOSE.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Turning on this variable can be useful when debugging http
tests. It can break a few tests in t5541 if not set
to an absolute path but it is not a variable
that the user is likely to have enabled accidentally.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new GIT_TRACE_CURL environment variable instead
of the deprecated GIT_CURL_VERBOSE.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The process spawned in the hook uses the test's trash directory as CWD.
As long as it is alive, the directory cannot be removed on Windows.
Although the test succeeds, the 'test_done' that follows produces an
error message and leaves the trash directory around. Kill the process
before the test case advances.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We might wonder why our && chain check does not catch this case:
The && chain check uses a strange exit code with the expectation that
the second or later part of a broken && chain would not exit with this
particular code.
This expectation does not work in this case because __git_ps1, being
the first command in the second part of the broken && chain, records
the current exit code, does its work, and finally returns to the caller
with the recorded exit code. This fools our && chain check.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Johannes Sixt
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Kirill Smelkov
Thomas Gummerer
Josh Triplett
René Scharfe
Ralf Thielow
Elia Pinto