| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some tests used shell constructs that did not work well on FreeBSD
* km/avoid-bs-in-shell-glob:
test: fix t5560 on FreeBSD
|
|
Some tests used shell constructs that did not work well on FreeBSD
* km/avoid-cp-a:
test: fix t7001 cp to use POSIX options
|
|
Since fd0a8c2e (first appearing in v1.7.0), the
t/t5560-http-backend-noserver.sh test has used a backslash escape
inside a ${} expansion in order to specify a literal '?' character.
Unfortunately the FreeBSD /bin/sh does not interpret this correctly.
In a POSIX compliant shell, the following:
x='one?two?three'
echo "${x#*\?}"
Would be expected to produce this:
two?three
When using the FreeBSD /bin/sh instead you get this:
one?two?three
In fact the FreeBSD /bin/sh treats the backslash as a literal
character to match so that this:
y='one\two\three'
echo "${y#*\?}"
Produces this unexpected value:
wo\three
In this case the backslash is not only treated literally, it also
fails to defeat the special meaning of the '?' character.
Instead, we can use the [...] construct to defeat the special meaning
of the '?' character and match it exactly in a way that works for the
FreeBSD /bin/sh as well as other POSIX /bin/sh implementations.
Changing the example like so:
x='one?two?three'
echo "${x#*[?]}"
Produces the expected output using the FreeBSD /bin/sh.
Therefore, change the use of \? to [?] in order to be compatible with
the FreeBSD /bin/sh which allows t/t5560-http-backend-noserver.sh to
pass on FreeBSD again.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 11502468 and 04c1ee57 (both first appearing in v1.8.5), the
t7001-mv test has used "cp -a" to perform a copy in several of the
tests.
However, the "-a" option is not required for a POSIX cp utility and
some platforms' cp utilities do not support it.
The POSIX equivalent of -a is -R -P -p.
Change "cp -a" to "cp -R -P -p" so that the t7001-mv test works
on systems with a cp utility that only implements the POSIX
required set of options and not the "-a" option.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
|
|
* cn/fetch-prune-overlapping-destination:
fetch: handle overlaping refspecs on --prune
fetch: add a failing test for prunning with overlapping refspecs
|
|
* mh/update-ref-batch-create-fix:
update-ref: fail create operation over stdin if ref already exists
|
|
* jk/commit-dates-parsing-fix:
t4212: loosen far-in-future test for AIX
date: recognize bogus FreeBSD gmtime output
|
|
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
|
|
* jk/mv-submodules-fix:
mv: prevent mismatched data when ignoring errors.
builtin/mv: fix out of bounds write
Conflicts:
t/t7001-mv.sh
|
|
* jk/lib-terminal-lazy:
t/lib-terminal: make TTY a lazy prerequisite
|
|
* us/printf-not-echo:
test-lib.sh: do not "echo" caller-supplied strings
rebase -i: do not "echo" random user-supplied strings
|
|
* jn/wt-status:
wt-status: lift the artificual "at least 20 columns" floor
wt-status: i18n of section labels
wt-status: extract the code to compute width for labels
wt-status: make full label string to be subject to l10n
|
|
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the tests in t4212 checks our behavior when we feed
gmtime a date so far in the future that it gives up and
returns NULL. Some implementations, like AIX, may actually
just provide us a bogus result instead.
It's not worth it for us to come up with heuristics that
guess whether the return value is sensible or not. On good
platforms where gmtime reports the problem to us with NULL,
we will print the epoch value. On bad platforms, we will
print garbage. But our test should be written for the
lowest common denominator so that it passes everywhere.
Reported-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Justin Lebar <jlebar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to consider that a remote-tracking branch may match more than
one rhs of a fetch refspec. In such a case, it is not enough to stop at
the first match but look at all of the matches in order to determine
whether a head is stale.
To this goal, introduce a variant of query_refspecs which returns all of
the matching refspecs and loop over those answers to check for
staleness.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clean -d pathspec" did not use the given pathspec correctly
and ended up cleaning too much.
* jk/clean-d-pathspec:
clean: simplify dir/not-dir logic
clean: respect pathspecs with "-d"
|
|
"git difftool" misbehaved when the repository is bound to the
working tree with the ".git file" mechanism, where a textual file
".git" tells us where it is.
* da/difftool-git-files:
t7800: add a difftool test for .git-files
difftool: support repositories with .git-files
|
|
"git push" did not pay attention to branch.*.pushremote if it is
defined earlier than remote.pushdefault; the order of these two
variables in the configuration file should not matter, but it did by
mistake.
* jk/remote-pushremote-config-reading:
remote: handle pushremote config in any order
|
|
Codepaths that parse timestamps in commit objects have been
tightened.
* jk/commit-dates-parsing-fix:
show_ident_date: fix tz range check
log: do not segfault on gmtime errors
log: handle integer overflow in timestamps
date: check date overflow against time_t
fsck: report integer overflow in author timestamps
t4212: test bogus timestamps with git-log
|
|
"git diff --external-diff" incorrectly fed the submodule directory
in the working tree to the external diff driver when it knew it is
the same as one of the versions being compared.
* tr/diff-submodule-no-reuse-worktree:
diff: do not reuse_worktree_file for submodules
|
|
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
|
|
"git check-attr" when working on a repository with a working tree
did not work well when the working tree was specified via the
--work-tree (and obviously with --git-dir) option.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
|
|
"merge-recursive" was broken in 1.7.7 era and stopped working in an
empty (temporary) working tree, when there are renames involved.
This has been corrected.
* bk/refresh-missing-ok-in-merge-recursive:
merge-recursive.c: tolerate missing files while refreshing index
read-cache.c: extend make_cache_entry refresh flag with options
read-cache.c: refactor --ignore-missing implementation
t3030-merge-recursive: test known breakage with empty work tree
|
|
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return
correct status value.
* nd/diff-quiet-stat-dirty:
diff: do not quit early on stat-dirty files
diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
|
|
Attempting to deepen a shallow repository by fetching over smart
HTTP transport failed in the protocol exchange, when no-done
extension was used. The fetching side waited for the list of
shallow boundary commits after the sending end stopped talking to
it.
* nd/http-fetch-shallow-fix:
t5537: move http tests out to t5539
fetch-pack: fix deepen shallow over smart http with no-done cap
protocol-capabilities.txt: document no-done
protocol-capabilities.txt: refer multi_ack_detailed back to pack-protocol.txt
pack-protocol.txt: clarify 'obj-id' in the last ACK after 'done'
test: rename http fetch and push test files
tests: auto-set LIB_HTTPD_PORT from test name
|
|
Allow "git cmd path/", when the 'path' is where a submodule is
bound to the top-level working tree, to match 'path', despite the
extra and unnecessary trailing slash (such a slash is often
given by command line completion).
* nd/submodule-pathspec-ending-with-slash:
clean: use cache_name_is_other()
clean: replace match_pathspec() with dir_path_match()
pathspec: pass directory indicator to match_pathspec_item()
match_pathspec: match pathspec "foo/" against directory "foo"
dir.c: prepare match_pathspec_item for taking more flags
pathspec: rename match_pathspec_depth() to match_pathspec()
pathspec: convert some match_pathspec_depth() to dir_path_match()
pathspec: convert some match_pathspec_depth() to ce_path_match()
|
|
In some places we "echo" a string that is supplied by the calling
test script and may contain backslash sequences. The echo command
of some shells, most notably "dash", interprets these backslash
sequences (POSIX.1 allows this) which may scramble the test
output.
Signed-off-by: Uwe Storbeck <uwe@ibr.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- update 'no editor' hook test and add 'editor' hook test
- make sure the tree is reset to a clean state after running a test
(using test_when_finished) so later tests are not impacted
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add (failing) tests: with commit changing the environment to let hooks
know that no editor will be used (by setting GIT_EDITOR to ":"), the
"edit hunk" functionality does not work (no editor is launched and the
whole hunk is committed).
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We shrink the source and destination arrays, but not the modes or
submodule_gitfile arrays, resulting in potentially mismatched data. Shrink
all the arrays at the same time to prevent this. Add tests to ensure the
problem does not recur.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When lib-terminal.sh is sourced by a test script, we
immediately set up the TTY prerequisite. We do so inside a
test_expect_success, because that nicely isolates any
generated output.
However, this early test can interfere with a script that
later wants to skip all tests (e.g., t5541 then goes on to
set up the httpd server, and wants to skip_all if that
fails). TAP output doesn't let us skip everything after we
have already run at least one test.
We could fix this by reordering the inclusion of
lib-terminal.sh in t5541 to go after the httpd setup. That
solves this case, but we might eventually hit a case with
circular dependencies, where either lib-*.sh include might
want to skip_all after the other has run a test. So
instead, let's just remove the ordering constraint entirely
by doing the setup inside a test_lazy_prereq construct,
rather than in a regular test. We never cared about the
test outcome anyway (it was written to always succeed).
Note that in addition to setting up the prerequisite, the
current test also defines test_terminal. Since we can't
affect the environment from a lazy_prereq, we have to hoist
that out. We previously depended on it _not_ being defined
when the TTY prereq isn't set as a way to ensure that tests
properly declare their dependency on TTY. However, we still
cover the case (see the in-code comment for details).
Reported-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we show unmerged paths, we had an artificial 20 columns floor
for the width of labels (e.g. "both deleted:") shown next to the
pathnames. Depending on the locale, this may result in a label that
is too wide when all the label strings are way shorter than 20
columns, or no-op when a label string is longer than 20 columns.
Just drop the artificial floor. The screen real estate is better
utilized this way when all the strings are shorter.
Adjust the tests to this change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-clean uses read_directory to fill in a `struct dir` with
potential hits. However, read_directory does not actually
check against our pathspec. It uses a simplified version
that may turn up false positives. As a result, we need to
check that any hits match our pathspec. We do so reliably
for non-directories. For directories, if "-d" is not given
we check that the pathspec matched exactly (i.e., we are
even stricter, and require an explicit "git clean foo" to
clean "foo/"). But if "-d" is given, rather than relaxing
the exact match to allow a recursive match, we do not check
the pathspec at all.
This regression was introduced in 113f10f (Make git-clean a
builtin, 2007-11-11).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a remote has multiple fetch refspecs and these overlap in the
target namespace, fetch may prune a remote-tracking branch which still
exists in the remote. The test uses a popular form of this, by putting
pull requests as stored in a popular hosting platform alongside "real"
remote-tracking branches.
The fetch command makes a decision of whether to prune based
on the first matching refspec, which in this case is insufficient, as it
covers the pull request names. This pair of refspecs does work as
expected if the more "specific" refspec is the first in the list.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When QUICK is set (i.e. with --quiet) we try to do as little work as
possible, stopping after seeing the first change. stat-dirty is
considered a "change" but it may turn out not, if no actual content is
changed. The actual content test is performed too late in the process
and the shortcut may be taken prematurely, leading to incorrect return
code.
Assume we do "git diff --quiet". If we have a stat-dirty file "a" and
a really dirty file "b". We break the loop in run_diff_files() and
stop after "a" because we have got a "change". Later in
diffcore_skip_stat_unmatch() we find out "a" is actually not
changed. But there's nothing else in the diff queue, we incorrectly
declare "no change", ignoring the fact that "b" is changed.
This also happens to "git diff --quiet HEAD" when it hits
diff_can_quit_early() in oneway_diff().
This patch does the content test earlier in order to keep going if "a"
is unchanged. The test result is cached so that when
diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on
re-testing "a".
Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which
makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce
the same output. Previously only the version without trailing slash
returns the difference (if any).
That's the effect of new ce_path_match(). dir_path_match() is not
executed by the new tests. And it should not introduce regressions.
Previously if path "dir/" is passed in with pathspec "dir/", they
obviously match. With new dir_path_match(), the path becomes
_directory_ "dir" vs pathspec "dir/", which is not executed by the old
code path in m_p_i(). The new code path is executed and produces the
same result.
The other case is pathspec "dir" and path "dir/" is now turned to
"dir" (with DO_MATCH_DIRECTORY). Still the same result before or after
the patch.
So why change? Because of the next patch about clean.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach add_cacheinfo to tell make_cache_entry to skip refreshing stat
information when a file is missing from the work tree. We do not want
the index to be stat-dirty after the merge but also do not want to fail
when a file happens to be missing.
This fixes the 'merge-recursive w/ empty work tree - ours has rename'
case in t3030-merge-recursive.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes when working with a large repository it can be useful to try
out a merge and only check out conflicting files to disk (for example as
a speed optimization on a server). Until v1.7.7-rc1~28^2~20
(merge-recursive: When we detect we can skip an update, actually skip
it, 2011-08-11), it was possible to do so with the following idiom:
# Prepare a temporary index and empty work tree.
GIT_INDEX_FILE="$PWD/tmp-$$-index" &&
export GIT_INDEX_FILE &&
GIT_WORK_TREE="$PWD/tmp-$$-work" &&
export GIT_WORK_TREE &&
mkdir "$GIT_WORK_TREE" &&
# Convince the index that our side is on disk.
git read-tree -i -m $ours &&
git update-index --ignore-missing --refresh &&
# Merge their side into our side.
bases=$(git merge-base --all $ours $theirs) &&
git merge-recursive $bases -- $ours $theirs &&
tree=$(git write-tree)
Nowadays, that still works and the exit status is the same, but
merge-recursive produces a diagnostic if "our" side renamed a file:
error: addinfo_cache failed for path 'dst'
Add a test to document this regression.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The remote we push can be defined either by
remote.pushdefault or by branch.*.pushremote for the current
branch. The order in which they appear in the config file
should not matter to precedence (which should be to prefer
the branch-specific config).
The current code parses the config linearly and uses a
single string to store both values, overwriting any
previous value. Thus, config like:
[branch "master"]
pushremote = foo
[remote]
pushdefault = bar
erroneously ends up pushing to "bar" from the master branch.
We can fix this by storing both values and resolving the
correct value after all config is read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many code paths assume that show_date and show_ident_date
cannot return NULL. For the most part, we handle missing or
corrupt timestamps by showing the epoch time t=0.
However, we might still return NULL if gmtime rejects the
time_t we feed it, resulting in a segfault. Let's catch this
case and just format t=0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an ident line has a ridiculous date value like (2^64)+1,
we currently just pass ULONG_MAX along to the date code,
which can produce nonsensical dates.
On systems with a signed long time_t (e.g., 64-bit glibc
systems), this actually doesn't end up too bad. The
ULONG_MAX is converted to -1, we apply the timezone field to
that, and the result ends up somewhere between Dec 31, 1969
and Jan 1, 1970.
However, there is still a few good reasons to detect the
overflow explicitly:
1. On systems where "unsigned long" is smaller than
time_t, we get a nonsensical date in the future.
2. Even where it would produce "Dec 31, 1969", it's easier
to recognize "midnight Jan 1" as a consistent sentinel
value for "we could not parse this".
3. Values which do not overflow strtoul but do overflow a
signed time_t produce nonsensical values in the past.
For example, on a 64-bit system with a signed long
time_t, a timestamp of 18446744073000000000 produces a
date in 1947.
We also recognize overflow in the timezone field, which
could produce nonsensical results. In this case we show the
parsed date, but in UTC.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we check commit objects, we complain if commit->date is
ULONG_MAX, which is an indication that we saw integer
overflow when parsing it. However, we do not do any check at
all for author lines, which also contain a timestamp.
Let's actually check the timestamps on each ident line
with strtoul. This catches both author and committer lines,
and we can get rid of the now-redundant commit->date check.
Note that like the existing check, we compare only against
ULONG_MAX. Now that we are calling strtoul at the site of
the check, we could be slightly more careful and also check
that errno is set to ERANGE. However, this will make further
refactoring in future patches a little harder, and it
doesn't really matter in practice.
For 32-bit systems, one would have to create a commit at the
exact wrong second in 2038. But by the time we get close to
that, all systems will hopefully have moved to 64-bit (and
if they haven't, they have a real problem one second later).
For 64-bit systems, by the time we get close to ULONG_MAX,
all systems will hopefully have been consumed in the fiery
wrath of our expanding Sun.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When t4212 was originally added by 9dbe7c3d (pretty: handle
broken commit headers gracefully, 2013-04-17), it tested our
handling of commits with broken ident lines in which the
timestamps could not be parsed. It does so using a bogus line
like "Name <email>-<> 1234 -0000", because that simulates an
error that was seen in the wild.
Later, 03818a4 (split_ident: parse timestamp from end of
line, 2013-10-14) made our parser smart enough to actually
find the timestamp on such a line, and t4212 was adjusted to
match. While it's nice that we handle this real-world case,
this meant that we were not actually testing the
bogus-timestamp case anymore.
This patch adds a test with a totally incomprehensible
timestamp to make sure we are testing the code path.
Note that the behavior is slightly different between regular log
output and "--format=%ad". In the former case, we produce a
sentinel value and in the latter, we produce an empty
string. While at first this seems unnecessarily
inconsistent, it matches the original behavior given by
9dbe7c3d.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Kyle J. McKay
Aman Gupta
Jeff King
Justin Lebar
Carlos Martín Nieto
Uwe Storbeck
Benoit Pierre
brian m. carlson
Nguyễn Thái Ngọc Duy
Brad King