| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git rebase -x" added an unnecessary 'exec' instructions before
'noop', which has been corrected.
* en/rebase-x-fix:
sequencer: avoid adding exec commands for non-commit creating commands
|
|
When a non-existent program is given as the pager, we tried to
reuse an uninitialized child_process structure and crashed, which
has been fixed.
* em/missing-pager:
pager: fix crash when pager program doesn't exist
|
|
"git submodule deinit" for a submodule whose .git metadata
directory is embedded in its working tree refused to work, until
the submodule gets converted to use the "absorbed" form where the
metadata directory is stored in superproject, and a gitfile at the
top-level of the working tree of the submodule points at it. The
command is taught to convert such submodules to the absorbed form
as needed.
* mp/absorb-submodule-git-dir-upon-deinit:
submodule: absorb git dir instead of dying on deinit
|
|
A small simplification of API.
* hn/create-reflog-simplify:
refs: drop force_create argument of create_reflog API
|
|
The function to cull a child process and determine the exit status
had two separate code paths for normal callers and callers in a
signal handler, and the latter did not yield correct value when the
child has caught a signal. The handling of the exit status has
been unified for these two code paths. An existing test with
flakiness has also been corrected.
* jk/t7006-sigpipe-tests-fix:
t7006: simplify exit-code checks for sigpipe tests
t7006: clean up SIGPIPE handling in trace2 tests
run-command: unify signal and regular logic for wait_or_whine()
|
|
Various operating modes of "git reset" have been made to work
better with the sparse index.
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
|
|
Leakfix.
* ab/checkout-branch-info-leakfix:
checkout: fix "branch info" memory leaks
|
|
Test fix.
* jk/t5319-midx-corruption-test-deflake:
t5319: corrupt more bytes of the midx checksum
|
|
"git var GIT_DEFAULT_BRANCH" is a way to see what name is used for
the newly created branch if "git init" is run.
* tw/var-default-branch:
var: add GIT_DEFAULT_BRANCH variable
|
|
The "--date=format:<strftime>" gained a workaround for the lack of
system support for a non-local timezone to handle "%s" placeholder.
* jk/strbuf-addftime-seconds-since-epoch:
strbuf_addftime(): handle "%s" manually
|
|
Redact the path part of packfile URI that appears in the trace output.
* if/redact-packfile-uri:
http-fetch: redact url on die() message
fetch-pack: redact packfile urls in traces
|
|
Code clean-up to eventually allow information on remotes defined
for an arbitrary repository to be read.
* gc/remote-with-fewer-static-global-variables:
remote: die if branch is not found in repository
remote: remove the_repository->remote_state from static methods
remote: use remote_state parameter internally
remote: move static variables into per-repository struct
t5516: add test case for pushing remote refspecs
|
|
Ensure that the sparseness of the in-core index matches the
index.sparse configuration specified by the repository immediately
after the on-disk index file is read.
* vd/sparse-sparsity-fix-on-read:
sparse-index: update do_read_index to ensure correct sparsity
sparse-index: add ensure_correct_sparsity function
sparse-index: avoid unnecessary cache tree clearing
test-read-cache.c: prepare_repo_settings after config init
|
|
The `--exec <cmd>` is documented as
Append "exec <cmd>" after each line creating a commit in the final
history.
...
If --autosquash is used, "exec" lines will not be appended for the
intermediate commits, and will only appear at the end of each
squash/fixup series.
Unfortunately, it would also add exec commands after non-pick
operations, such as 'no-op', which could be seen for example with
git rebase -i --exec true HEAD
todo_list_add_exec_commands() intent was to insert exec commands after
each logical pick, while trying to consider a chains of fixup and squash
commits to be part of the pick before it. So it would keep an 'insert'
boolean tracking if it had seen a pick or merge, but not write the exec
command until it saw the next non-fixup/squash command. Since that
would make it miss the final exec command, it had some code that would
check whether it still needed to insert one at the end, but instead of a
simple
if (insert)
it had a
if (insert || <condition that is always true>)
That's buggy; as per the docs, we should only add exec commands for
lines that create commits, i.e. only if insert is true. Fix the
conditional.
There was one testcase in the testsuite that we tweak for this change;
it was introduced in 54fd3243da ("rebase -i: reread the todo list if
`exec` touched it", 2017-04-26), and was merely testing that after an
exec had fired that the todo list would be re-read. The test at the
time would have worked given any revision at all, though it would only
work with 'HEAD' as a side-effect of this bug. Since we're fixing this
bug, choose something other than 'HEAD' for that test.
Finally, add a testcase that verifies when we have no commits to pick,
that we get no exec lines in the generated todo list.
Reported-by: Nikita Bobko <nikitabobko@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
|
|
Leakfix.
* tb/plug-pack-bitmap-leaks:
pack-bitmap.c: more aggressively free in free_bitmap_index()
pack-bitmap.c: don't leak type-level bitmaps
midx.c: write MIDX filenames to strbuf
builtin/multi-pack-index.c: don't leak concatenated options
builtin/repack.c: avoid leaking child arguments
builtin/pack-objects.c: don't leak memory via arguments
t/helper/test-read-midx.c: free MIDX within read_midx_file()
midx.c: don't leak MIDX from verify_midx_file
midx.c: clean up chunkfile after reading the MIDX
|
|
The command line complation for "git send-email" options have been
tweaked to make it easier to keep it in sync with the command itself.
* tp/send-email-completion:
send-email docs: add format-patch options
send-email: programmatically generate bash completions
|
|
Things like "git -c branch.sort=bogus branch new HEAD", i.e. the
operation modes of the "git branch" command that do not need the
sort key information, no longer errors out by seeing a bogus sort
key.
* jc/fix-ref-sorting-parse:
for-each-ref: delay parsing of --sort=<atom> options
|
|
"git stash" learned the "--staged" option to stash away what has
been added to the index (and nothing else).
* so/stash-staged:
stash: get rid of unused argument in stash_staged()
stash: implement '--staged' option for 'push' and 'save'
|
|
The "remainder" of hn/refs-errno-cleanup topic.
* ab/refs-errno-cleanup: (21 commits)
refs API: post-migration API renaming [2/2]
refs API: post-migration API renaming [1/2]
refs API: don't expose "errno" in run_transaction_hook()
refs API: make expand_ref() & repo_dwim_log() not set errno
refs API: make resolve_ref_unsafe() not set errno
refs API: make refs_ref_exists() not set errno
refs API: make refs_resolve_refdup() not set errno
refs tests: ignore ignore errno in test-ref-store helper
refs API: ignore errno in worktree.c's find_shared_symref()
refs API: ignore errno in worktree.c's add_head_info()
refs API: make files_copy_or_rename_ref() et al not set errno
refs API: make loose_fill_ref_dir() not set errno
refs API: make resolve_gitlink_ref() not set errno
refs API: remove refs_read_ref_full() wrapper
refs/files: remove "name exist?" check in lock_ref_oid_basic()
reflog tests: add --updateref tests
refs API: make refs_rename_ref_available() static
refs API: make parse_loose_ref_contents() not set errno
refs API: make refs_read_raw_ref() not set errno
refs API: add a version of refs_resolve_ref_unsafe() with "errno"
...
|
|
Allow "git status --porcelain=v2" to show the number of stash
entries with --show-stash like the normal output does.
* ow/stash-count-in-status-porcelain-output:
status: print stash info with --porcelain=v2 --show-stash
status: count stash entries in separate function
|
|
Treat "_" as any other URL-valid characters in an URL when matching
the per-URL configuration variable names.
* jk/loosen-urlmatch:
urlmatch: add underscore to URL_HOST_CHARS
|
|
Remove the `ensure_full_index` guard on `read_from_tree` and update `git
reset --mixed` to ensure it can use sparse directory index entries wherever
possible. Sparse directory entries are reset using `diff_tree_oid`, which
requires `change` and `add_remove` functions to process the internal
contents of the sparse directory. The `recursive` diff option handles cases
in which `reset --mixed` must diff/merge files that are nested multiple
levels deep in a sparse directory.
The use of pathspecs with `git reset --mixed` introduces scenarios in which
internal contents of sparse directories may be matched by the pathspec. In
order to reset *all* files in the repo that may match the pathspec, the
following conditions on the pathspec require index expansion before
performing the reset:
* "magic" pathspecs
* wildcard pathspecs that do not match only in-cone files or entire sparse
directories
* literal pathspecs matching something outside the sparse checkout
definition
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove `ensure_full_index` guard on `prime_cache_tree` and update
`prime_cache_tree_rec` to correctly reconstruct sparse directory entries in
the cache tree. While processing a tree's entries, `prime_cache_tree_rec`
must determine whether a directory entry is sparse or not by searching for
it in the index (*without* expanding the index). If a matching sparse
directory index entry is found, no subtrees are added to the cache tree
entry and the entry count is set to 1 (representing the sparse directory
itself). Otherwise, the tree is assumed to not be sparse and its subtrees
are recursively added to the cache tree.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new tests for `--merge` and `--keep` modes, as well as mixed reset with
pathspecs. New performance test cases exercise various execution paths for
`reset`.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless `command_requires_full_index` forces index expansion, ensure in-core
index sparsity matches config settings on read by calling
`ensure_correct_sparsity`. This makes the behavior of the in-core index more
consistent between different methods of updating sparsity: manually changing
the `index.sparse` config setting vs. executing
`git sparse-checkout --[no-]sparse-index init`
Although index sparsity is normally updated with `git sparse-checkout init`,
ensuring correct sparsity after a manual `index.sparse` change has some
practical benefits:
1. It allows for command-by-command sparsity toggling with
`-c index.sparse=<true|false>`, e.g. when troubleshooting issues with the
sparse index.
2. It prevents users from experiencing abnormal slowness after setting
`index.sparse` to `true` due to use of a full index in all commands until
the on-disk index is updated.
Helped-by: Junio C Hamano <gitster@pobox.com>
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move `prepare_repo_settings` after the git directory has been set up in
`test-read-cache.c`. The git directory settings must be initialized to
properly assign repo settings using the worktree-level git config.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When prepare_cmd() fails for, e.g., pager process setup,
child_process_clear() frees the memory in pager_process.args, but .argv
was pointed to pager_process.args.v earlier in start_command(), so it's
now a dangling pointer.
setup_pager() is then called a second time, from cmd_log_init_finish()
in this case, and any further operations using its .argv, e.g. strvec_*,
will use the dangling pointer and eventually crash. According to trivial
tests, setup_pager() is not called twice if the first call is
successful.
This patch makes sure that pager_process is properly initialized on
setup_pager(). Drop CHILD_PROCESS_INIT from its declaration since it's
no longer really necessary.
Add a test to catch possible regressions.
Reproducer:
$ git config pager.show INVALID_PAGER
$ git show $VALID_COMMIT
error: cannot run INVALID_PAGER: No such file or directory
[1] 3619 segmentation fault (core dumped) git show $VALID_COMMIT
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix for 2.34
* ds/add-rm-with-sparse-index:
dir: revert "dir: select directories correctly"
|
|
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
|
|
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with versions of PCREv2 library older
than 10.34 in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
|
|
Regression fix for 2.34
* ds/add-rm-with-sparse-index:
dir: revert "dir: select directories correctly"
|
|
Some tests in t7006 check for a SIGPIPE result by recording $? and
comparing it with test_match_signal. Before the previous commit, the
command was on the left-hand side of a pipe, and so we had to do some
subshell trickery to extract it.
But now that this is no longer the case, we can do things much more
simply: just run the command directly, using braces to avoid wrecking
the &&-chain, and then record $?. We could almost use test_expect_code
here, but it doesn't know about test_match_signal.
Likewise, for tests which expect success (i.e., not SIGPIPE), we can
just put them in the &&-chain as usual. That even lets us get rid of the
!MINGW check, since the expectation is the same on both sides.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comit c24b7f6736 (pager: test for exit code with and without SIGPIPE,
2021-02-02) introduced some tests that don't reliably generate SIGPIPE
where we expect it (i.e., when our pager doesn't read all of the output
from git-log).
There are two problems that somewhat cancel each other out.
First is that the output of git-log isn't very large (only around 800
bytes). So even if the pager doesn't read all of our output, it's racy
whether or not we'll actually get a SIGPIPE (we won't if we write all of
the output into the pipe buffer before the pager exits).
But we wrap git-log with test_terminal, which is supposed to propagate
the exit status of git-log. However, it doesn't always do so;
test_terminal will copy to stdout any lines that it got from our fake
pager, and it pipes to an empty command. So most of the time we are
seeing a SIGPIPE from test_terminal itself (though this is likewise
racy).
Let's try to make this more robust in two ways:
1. We'll put a commit with a huge message at the tip of history. Since
this is over a megabyte, it should fill the OS pipe buffer
completely, causing git-log to keep trying to write even after the
pager has exited.
2. We'll redirect the output of test_terminal to /dev/null. That means
it can never get SIGPIPE itself, and will always be giving us the
exit code from git-log.
These two changes reveal that one of the tests was looking for the wrong
behavior. If we try to start a pager that does not exist (according to
execve()), then the error propagates from start_command() back to the
pager code as an error, and we avoid redirecting git-log's stdout to the
broken pager entirely. Instead, it goes straight to the original stdout
(test_terminal's pty in this case), and we do not see a SIGPIPE at all.
So the test "git attempts to page to nonexisting pager command, gets
SIGPIPE" is checking the wrong outcome; it should be looking for a
successful exit (and was only confused by test_terminal's SIGPIPE).
There's a related test, "git discards nonexisting pager without
SIGPIPE", which sets the pager to a shell command which will read all
input and _then_ run a non-existing command. But that doesn't trigger
the same execve() behavior. We really do run the shell there and
redirect git-log's stdout to it. And the fact that the shell then exits
127 is not interesting. It is not different at that point than the
earlier test to check for "exit 1". So we can drop that test entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 507d7804c0 (pager: don't use unsafe functions in signal handlers,
2015-09-04), we have a separate code path in wait_or_whine() for the
case that we're in a signal handler. But that code path misses some of
the cases handled by the main logic.
This was improved in be8fc53e36 (pager: properly log pager exit code
when signalled, 2021-02-02), but that covered only case: actually
returning the correct error code. But there are some other cases:
- if waitpid() returns failure, we wouldn't notice and would look at
uninitialized garbage in the status variable; it's not clear if it's
possible to trigger this or not
- if the process exited by signal, then we would still report "-1"
rather than the correct signal code
This latter case even had a test added in be8fc53e36, but it doesn't
work reliably. It sets the pager command to:
>pager-used; test-tool sigchain
The latter command will die by signal, but because there are multiple
commands, there will be a shell in between. And it's the shell whose
waitpid() call will see the signal death, and it will then exit with
code 143, which is what Git will see.
To make matters even more confusing, some shells (such as bash) will
realize that there's nothing for the shell to do after test-tool
finishes, and will turn it into an exec. So the test was only checking
what it thought when /bin/sh points to a shell like bash (we're relying
on the shell used internally by Git to spawn sub-commands here, so even
running the test under bash would not be enough).
This patch adjusts the tests to explicitly call "exec" in the pager
command, which produces a consistent outcome regardless of shell. Note
that without the code change in this patch it _should_ fail reliably,
but doesn't. That test, like its siblings, tries to trigger SIGPIPE in
the git-log process writing to the pager, but only do so racily. That
will be fixed in a follow-on patch.
For the code change here, we have two options:
- we can teach the in_signal code to handle WIFSIGNALED()
- we can stop returning early when in_signal is set, and instead
annotate individual calls that we need to skip in this case
The former is a simpler patch, but means we're essentially duplicating
all of the logic. So instead I went with the latter. The result is a
bigger patch, and we do run the risk of new code being added but
forgetting to handle in_signal. But in the long run it seems more
maintainable.
I've skipped any non-trivial calls for the in_signal case, like calling
error(). We'll also skip the call to clear_child_for_cleanup(), as we
were before. This is arguably the wrong thing to do, since we wouldn't
want to try to clean it up again. But:
- we can't call it as-is, because it calls free(), which we must avoid
in a signal handler (we'd have to pass in_signal so it can skip the
free() call)
- we'll only go through the list of children to clean once, since our
cleanup_children_on_signal() handler pops itself after running (and
then re-raises, so eventually we'd just exit). So this cleanup only
matters if a process is on the cleanup list _and_ it has a separate
handler to clean itself up. Which is questionable in the first place
(and AFAIK we do not do).
- double-cleanup isn't actually that bad anyway. waitpid() will just
return an error, which we won't even report because of in_signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit f6526728f950cacfd5b5e42bcc65f2c47f3da654.
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is only one caller, builtin/checkout.c, and it hardcodes
force_create=1.
This argument was introduced in abd0cd3a301 (refs: new public ref function:
safe_create_reflog, 2015-07-21), which promised to immediately use it in a
follow-on commit, but that never happened.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
|
|
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with certain versions of PCREv2
library in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
|
|
Currently, running 'git submodule deinit' on repos where the
submodule's '.git' is a directory, aborts with a message that is not
exactly user friendly.
Let's change this to instead warn the user that the .git/ directory
has been absorbed into the superproject.
The rest of the deinit function can operate as it already does with
new-style submodules.
In one test, we used to require "git submodule deinit" to fail even
with the "--force" option when the submodule's .git/ directory is not
absorbed. Adjust it to expect the operation to pass.
Suggested-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Mugdha Pattnaik <mugdhapattnaik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit ae39ba431ab861548eb60b4bd2e1d8b8813db76f, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push remote-name" (that is, with no refspec given on the command
line) should push the refspecs in remote.remote-name.push. There is no
test case that checks this behavior in detached HEAD, so add one.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the tests in t5319 corrupts the checksum of the midx file by
writing a single 0xff over the final byte, and then confirms that we
detect the problem. This usually works fine, but would break if the
actual checksum ended with that same byte already.
It seems like this should happen in 1 out of 256 test runs, but it turns
out to be less often in practice. The contents of the midx are mostly
deterministic because it's based on the objects, and we remove most
sources of randomness by setting GIT_COMMITTER_DATE, etc. However,
there's still some randomness: some objects are duplicated between
packs, and the midx must decide which to use, which can be based on
timing.
So very occasionally we can end up with a real 0xff byte, and the test
fails. The most robust fix would be to read out the final byte and then
change it to something else (e.g., adding 1 mod 256). But that's awkward
to do in shell. Let's just blindly corrupt 10 bytes instead of 1, which
reduces our chances of an accidental noop to 1 in 2^80.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "checkout" command is one of the main sources of leaks in the test
suite, let's fix the common ones by not leaking from the "struct
branch_info".
Doing this is rather straightforward, albeit verbose, we need to
xstrdup() constant strings going into the struct, and free() the ones
we clobber as we go along.
This also means that we can delete previous partial leak fixes in this
area, i.e. the "path_to_free" accounting added by 96ec7b1e708 (Convert
resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13).
There was some discussion about whether "we should retain the "const
char *" here and cast at free() time, or have it be a "char *". Since
this is not a public API with any sort of API boundary let's use
"char *", as is already being done for the "refname" member of the
same struct.
The tests to mark as passing were found with:
rm .prove; GIT_SKIP_TESTS=t0027 prove -j8 --state=save t[0-9]*.sh :: --immediate
# apply & compile this change
prove -j8 --state=failed :: --immediate
I.e. the ones that were newly passing when the --state=failed command
was run. I left out "t3040-subprojects-basic.sh" and
"t4131-apply-fake-ancestor.sh" to to optimization-level related
differences similar to the ones noted in[1], except that these would
be something the current 'linux-leaks' job would run into.
1. https://lore.kernel.org/git/cover-v3-0.6-00000000000-20211022T175227Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix.
* ab/fsck-unexpected-type:
object-file: free(*contents) only in read_loose_object() caller
object-file: fix SEGV on free() regression in v2.34.0-rc2
|
|
Regression fix.
* ps/connectivity-optim:
Revert "connected: do not sort input revisions"
|
|
This reverts commit f45022dc2fd692fd024f2eb41a86a66f19013d43,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
|
|
Fix a regression introduced in my 96e41f58fe1 (fsck: report invalid
object type-path combinations, 2021-10-01). When fsck-ing blobs larger
than core.bigFileThreshold, we'd free() a pointer to uninitialized
memory.
This issue would have been caught by SANITIZE=address, but since it
involves core.bigFileThreshold, none of the existing tests in our test
suite covered it.
Running them with the "big_file_threshold" in "environment.c" changed
to say "6" would have shown this failure, but let's add a dedicated
test for this scenario based on Han Xin's report[1].
The bug was introduced between v9 and v10[2] of the fsck series merged
in 061a21d36d8 (Merge branch 'ab/fsck-unexpected-type', 2021-10-25).
1. https://lore.kernel.org/git/20211111030302.75694-1-hanxin.hx@alibaba-inc.com/
2. https://lore.kernel.org/git/cover-v10-00.17-00000000000-20211001T091051Z-avarab@gmail.com/
Reported-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some setups, packfile uris act as bearer token. It is not
recommended to expose them plainly in logs, although in special
circunstances (e.g. debug) it makes sense to write them.
Redact the packfile URL paths by default, unless the GIT_TRACE_REDACT
variable is set to false. This mimics the redacting of the Authorization
header in HTTP.
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Elijah Newren
Victoria Dye
Enzo Matsumiya
Jeff King
Derrick Stolee
Han-Wen Nienhuys
Mugdha Pattnaik
Glen Choo
Erwin Villejo
Ævar Arnfjörð Bjarmason
Ivan Frade