| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It seems that "git bisect good" and "git bisect skip" have never
properly checked arguments that have been passed to them. As soon
as one of them can be parsed as a SHA1, no error or warning would
be given.
This is because 'git rev-parse --revs-only --no-flags "$@"' always
"exit 0" and outputs all the SHA1 it can found from parsing "$@".
This patch fix this by using, for each "bisect good" argument, the
same logic as for the "bisect bad" argument.
While at it, this patch teaches "bisect bad" to give a meaningfull
error message when it is passed more than one argument.
Note that if "git bisect good" or "git bisect skip" is given some
proper revs and then something that is not a proper rev, then the
first proper revs will still have been marked as "good" or "skip".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ulrik Sverdrup noticed that git-archive doesn't correctly apply the attribute
export-subst when the option --prefix is given, too.
When it checked if a file has the attribute turned on, git-archive would try
to look up the full path -- including the prefix -- in .gitattributes. That's
wrong, as the prefix doesn't need to have any relation to any existing
directories, tracked or not.
This patch makes git-archive ignore the prefix when looking up if value of the
attribute export-subst for a file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier commit 4be6096 (apply --unidiff-zero: loosen sanity checks for
--unidiff=0 patches, 2006-09-17) made match_beginning and match_end
computed incorrectly. If a hunk inserts at the beginning, old position
recorded at the hunk is line 0, and if a hunk changes at the beginning, it
is line 1. The new test added to t4104 exposes that the old code did not
insist on matching at the beginning for a patch to add a line to an empty
file.
An even older 65aadb9 (apply: force matching at the beginning.,
2006-05-24) was equally wrong in that it tried to take hints from the
number of leading context lines, to decide if the hunk must match at the
beginning, but we can just look at the line number in the hunk to decide.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-fetch-regression-1.5.4:
git-fetch test: test tracking fetch results, not just FETCH_HEAD
Fix branches file configuration
Tighten refspec processing
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We really should have done this long time ago. Existing t5515 test
was written for the specific purpose of catching regression to the
contents of generated FETCH_HEAD file, but it also is a good place
to make sure various fetch configurations do fetch what they intend
to fetch (and nothing else).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
This was cherry picked from commit ef00d15 (Tighten refspec processing,
2008-03-17), and two fix-up commits 46220ca (remote.c: Fix overtight
refspec validation, 2008-03-20) and 7d19da4 (refspec: allow colon-less
wildcard "refs/category/*", 2008-03-25) squashed in.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, the callchain from pretty_print_commit() down to pp_title_line()
had an unwarranted assumption that the presense of "after_subject"
parameter, means the caller has already output MIME headers for
attachments. The parameter's primary purpose is to give extra header
lines the caller wants to place after pp_title_line() generates the
"Subject: " line.
This assumption does not hold when the user used the format.header
configuration variable to pass extra headers, and caused a message with
non-ASCII character to lack proper MIME headers (e.g. 8-bit CTE header).
The earlier logic also failed to suppress duplicated MIME headers when
"format-patch -s --attach" is asked for and the signer's name demanded
8-bit clean transport.
This patch fixes the logic by introducing a separate need_8bit_cte
parameter passed down the callchain. This can have one of these values:
-1 : we've already done MIME crap and we do not want to add extra header
to say this is 8bit in pp_title_line();
0 : we haven't done MIME and we have not seen anything that is 8bit yet;
1 : we haven't done MIME and we have seen something that is 8bit;
pp_title_line() must add MIME header.
It adds two tests by Jeff King who independently diagnosed this issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
File mode changes should be handled similarly to changes of content.
That is, if the file mode changed in only one branch, keep the changed
version, and if both branch changed to different mode, mark it as a
conflict.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Solaris' /usr/bin/tr doesn't seem to like multiple character
ranges in brackets (it simply prints "Bad string").
Instead, let's just enumerate the transformation we want.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The construct
sh -c "$0 \"$@\"" <editor> <file>
does not pick up quotes in <editor>, so you cannot give path to the
editor that has a shell IFS whitespace in it, and also give it initial
set of parameters and flags. Replace $0 with <editor> to fix this issue.
This fixes
git config core.editor '"c:/Program Files/What/Ever.exe"'
In other words, you can specify an editor with spaces in its path using a
config containing something like this:
[core]
editor = \"c:/Program Files/Darn/Spaces.exe\"
NOTE: we cannot just replace the $0 with \"$0\", because we still want
this to work:
[core]
editor = emacs -nw
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, --abort would end by git resetting to ORIG_HEAD, but some
commands, such as git reset --hard (which happened in git rebase --skip,
but could just as well be typed by the user), would have already modified
ORIG_HEAD.
Just use the orig-head we store in $dotest instead.
[jc: cherry-picked from 48411d and 4947cf9 on 'master']
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kb/maint-filter-branch-disappear:
filter-branch: handle "disappearing tree" case correctly in subdir filter
|
|
The subdirectory filter had a bug to notice that the commit in question
did not have anything in the path-limited part of the tree. $commit:$path
does not name an empty tree when $path does not appear in $commit.
This should fix it. The additional test in t7003 is originally from Kevin
Ballard but with fixups.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_from() ends with a call to read_next_command(), which is needed
when using cmd_from() from commands where from is not the last element.
With reset, however, "from" is the last command, after which the flow
returns to the main loop, which calls read_next_command() again.
Because of this, always set unread_command_buf in cmd_reset_branch(),
even if cmd_from() was successful.
Add a test case for this in t9300-fast-import.sh.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-cvsexport:
cvsexportcommit: be graceful when "cvs status" reorders the arguments
Conflicts:
t/t9200-git-cvsexportcommit.sh
|
|
Dscho noticed that Term::ReadLine (used by send-email) colorized its
output for his TERM settings, inside t9001 tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-merge used to use either the --squash,--no-squash, --no-ff,--ff,
--no-commit,--commit option, whichever came last in the command line.
This lead to some un-intuitive behavior, having
git merge --no-commit --no-ff <branch>
actually commit the merge. Now git-merge respects --no-commit together
with --no-ff, as well as other combinations of the options. However,
this broke a selftest in t/t7600-merge.sh which expected to have --no-ff
completely override the --squash option, so that
git merge --squash --no-ff <branch>
fast-forwards, and makes a merge commit; combining --squash with --no-ff
doesn't really make sense though, and is now refused by git-merge. The
test is adapted to test --no-ff without the preceding --squash, and
another test is added to make sure the --squash --no-ff combination is
refused.
The unexpected behavior was reported by John Goerzen through
http://bing.sdebian.org/468568
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous code mistakenly used wt_status_prepare to check whether the
index had anything commitable in it; however, that function is just an
init function, and will never report a dirty index.
The correct way with wt_status_* would be to call wt_status_print with the
output pointing to /dev/null or similar. However, that does extra work by
both examining the working tree and spewing status information to nowhere.
Instead, let's just implement the useful subset of wt_status_print as an
"is_index_dirty" function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we expect a git command to notice and signal errors, we
carelessly wrote in our tests:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
! git command
'
but a non-zero exit could come from the "git command" segfaulting.
A new helper function "tset_must_fail" is introduced and it is
meant to be used to make sure the command gracefully fails (iow,
dying and exiting with non zero status is counted as a failure
to "gracefully fail"). The above example should be written as:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
test_must_fail git command
'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The testcase verifies that 'git cvsexportcommit' functions correctly when
the '-w' option is used, and GIT_DIR is set to a relative path (e.g. '.').
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For some reason, t5505-remote was setting GIT_CONFIG to .git/config
and exporting it. This should have been no-op, as test framework did
the same for a long time anyway.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A non-empty line containing no spaces should be treated by --parseopt as
an option group header, but was causing a bus error. Also added a test
script for rev-parse --parseopt.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a remote repository which's HEAD refers to a nonexistent
ref, git-clone cloned all existing refs, but failed to write the
configuration for 'remote'. Now it detects the dangling remote HEAD,
refuses to checkout any local branch since HEAD refers to nowhere, but
properly writes the configuration for 'remote', so that subsequent
'git fetch's don't fail.
The problem was reported by Daniel Jacobowitz through
http://bugs.debian.org/466581
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In my use cases, "cvs status" sometimes reordered the passed filenames,
which often led to a misdetection of a dirty state (when it was in
reality a clean state).
I finally tracked it down to two filenames having the same basename.
So no longer trust the order of the results blindly, but actually check
the file name.
Since "cvs status" only returns the basename (and the complete path on the
server which is useless for our purposes), run "cvs status" several times
with lists consisting of files with unique (chomped) basenames.
Be a bit clever about new files: these are reported as "no file <blabla>",
so in order to discern it from existing files, prepend "no file " to the
basename.
In other words, one call to "cvs status" will not ask for two files
"blabla" (which does not yet exist) and "no file blabla" (which exists).
This patch makes cvsexportcommit slightly slower, when the list of changed
files has non-unique basenames, but at least it is accurate now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There may still be some entries from the original index that
should be discarded before we show the status. In
particular, if a file was added in the index but not
included in the partial commit, it would still show up in
the status listing as staged for commit.
Ultimately the correct fix is to keep the two states in
separate index_state variables. Then we can avoid having
to reload the cache from the temporary file altogether, and
just point wt_status_print at the correct index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command used a very old fashioned construct to extract
filenames out of diff-index and ended up corrupting the output.
We can simply use --name-only and pipe into --stdin mode of
update-index. It's been like that for the past 2 years or so
since a94d994 (update-index: work with c-quoted name).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
c1795bb (Unify whitespace checking) incorrectly made the
checking function return without incrementing the line numbers
when there is no whitespace problem is found on a '+' line.
This resurrects the earlier behaviour.
Noticed and reported by Jay Soffian. The test script was stolen
from Jay's independent fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function is intended to be fed one logical line at a time to
inspect, but a QP encoded raw input line can have more than one
lines, just like BASE64 encoded one.
Quoting LF as =0A may be unusual but RFC2045 allows it.
The issue was noticed and fixed by Jay Soffian. JC added a test
to protect the fix from regressing later.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests in 't1300-repo-config.sh' did not check what happens when
an empty value like the following is used in the config file:
[emptyvalue]
variable =
Also it was not checked that a variable with no value like the
following:
[novalue]
variable
gives a boolean "true" value, while an ampty value gives a boolean
"false" value.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It makes no sense to suggest "git reset HEAD" since we have
no HEAD commit. This actually used to work but regressed in
f26a0012.
wt_status_print_cached_header was updated to take the whole
wt_status struct rather than just the reference field.
Previously the various code paths were sometimes sending in
s->reference and sometimes sending in NULL, making the
decision on whether this was an initial commit before we
even got to this function. Now we must check the initial
flag here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used to use "cat-file commit $commit" to extract the original
author information from existing commit, but an earlier commit
5ac2715 (Consistent message encoding while reusing log from an
existing commit) changed it to use "git show -s $commit". If
you have a file in your work tree that can be interpreted as a
valid object name (e.g. "HEAD"), this conversion will not work.
Disambiguate by marking the end of revision parameter on the
comand line with an explicit "--" to fix this.
This breakage is most visible with rebase when a file called
"HEAD" exists in the worktree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Write errors when repacking (eg, due to out-of-space conditions)
can leave temporary packs (and possibly other files beginning
with "tmp_") lying around which no existing
codepath removes and which aren't obvious to the casual user.
These can also be multi-megabyte files wasting noticeable space.
Unfortunately there's no way to definitely tell in builtin-prune
that a tmp_ file is not being used by a concurrent process,
such as a fetch. However, it is documented that pruning should
only be done on a quiet repository and --expire is honoured
(using code from Johannes Schindelin, along with a test case
he wrote) so that its safety is the same as that of loose
object pruning.
Since they might be signs of a problem (unlike orphaned loose
objects) the names of any removed files are printed.
Signed-off-by: David Tweed (david.tweed@gmail.com)
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of insisting on a symbolic ref, bisect now accepts detached
HEADs, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
find_beginning_of_line didn't take into account that the
previous line might have ended with \ in which case it shouldn't
stop but continue its search.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was an embarrassing pair of off-by-one miscounting that
failed to match path "a/b/c" when "a/.gitattributes" tried to
name it with relative path "b/c".
This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Numeric color only worked if it was at end of line.
Noticed by Chris Larson <clarson@kergoth.com>.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scripted version might not have handled this correctly
either, but the version rewritten in C definitely does not grok
this and complains $tag is not a commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We only care about getting what should be an empty string and
sending it to a file, without a trailing LF, so the empty string
translates into a 0 byte file. Earlier when I originally wrote
these lines Mac OS X allowed the format string of printf to be
the empty string, but more recent versions appear to have been
'improved' with error messages if the format is not given.
This may cause problems if we ever wind up with changes to the hook
tests. A minor cleanup makes the test more safe on all systems,
by conforming to accepted printf conventions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This accompanies c5b09feb786f6a2456ec3d8203d0f4d67f09f043 (Avoid
update hook during git-rebase --interactive) to make sure that
any regression to make Debian's Bug#458782 (git-core: git-rebase
doesn't work when trying to squash changes into commits created
with --no-verify) resurface will be caught.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The exit value of some commands was not being used for the
test output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the upstream branch is tracked, we can detect if that branch
was rebased since it was last fetched. Teach git to use that
information to rebase from the old remote head onto the new remote head.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git histories may have multiple roots, which can cause
git merge-base to fail and this caused git cvsserver to die.
This commit teaches git cvsserver to handle a failing git
merge-base gracefully, and modifies the test case to verify this.
All the test cases now use a history with two roots.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
git-cvsserver.perl | 9 ++++++++-
t/t9400-git-cvsserver-server.sh | 10 +++++++++-
2 files changed, 17 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is preferable to have the test setup in a test case. The
setup itself may fail and having it as a test case handles this
situation more gracefully.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If options are aggregated, and that the whole token is an exact
prefix of a long option that is longer than 2 letters, reject
it. This is to prevent a common typo:
$ git commit -amend
to get interpreted as "commit all with message 'end'".
The typo check isn't performed if there is no aggregation,
because the stuck form is the recommended one. If we have `-o`
being a valid short option that takes an argument, and --option
a long one, then we _MUST_ accept -option as "'o' option with
argument 'ption'", which is our official recommended form.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test 'creating too deep nesting' can fail even when cloning the repos,
but is not its main purpose (it has to prepare nested repos and ensure
the last one is invalid). So split the test into the creation and
invalidity checking parts.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Christian Couder
René Scharfe
Junio C Hamano
Brandon Casey
Daniel Barkalow
Clemens Buchacher
Jeff King
Johannes Schindelin
Mike Hommey
Adeodato Simó
Gerrit Pape
Carl Worth
Jay Soffian
Johan Herland
David Steven Tweed
Frank Lichtenheld
Timo Hirvonen
Michele Ballabio
Shawn O. Pearce
Steffen Prohaska
Pierre Habouzit
Alex Riesen