| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* vi/make-test-vector-less-specific:
tests: cleanup binary test vector files
|
|
* jk/clone-detached:
clone: always fetch remote HEAD
make copy_ref globally available
consider only branches in guess_remote_head
t: add tests for cloning remotes with detached HEAD
|
|
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
|
|
* jc/maint-reset-unmerged-path:
reset [<commit>] paths...: do not mishandle unmerged paths
|
|
When importing a repo, the time on the initial commit had been
just "now". But this causes problems when trying to share among
git-p4 repos that were created identically, although at different
times. Instead, use the time in the top-most p4 change as the
time for the git import commit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add this missing line in one of the tests. Otherwise, on fast
machines, the following git-p4 commit will complain that nobody
edited the submission message.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cleanup nicely when tests fail. This avoids many duplicated
lines in the tests, and adds cleanup in a couple of tests that
did not have it. When one fails, now all the rest will not
fail too.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Break down no-lstat() condition checks in verify_uptodate()
t7400: fix bogus test failure with symlinked trash
Documentation: clarify the invalidated tree entry format
|
|
One of the tests in t7400 fails if the trash directory has a
symlink anywhere in its path. E.g.:
$ mkdir /tmp/git-test
$ mkdir /tmp/git-test/real
$ ln -s real /tmp/git-test/link
$ ./t7400-submodule-basic --root=/tmp/git-test/real
...
# passed all 44 test(s)
$ ./t7400-submodule-basic --root=/tmp/git-test/link
...
not ok - 41 use superproject as upstream when path is relative and no url is set there
The failing test does:
git submodule add ../repo relative &&
...
git submodule sync relative &&
test "$(git config submodule.relative.url)" = "$submodurl/repo"
where $submodurl comes from the $TRASH_DIRECTORY the user
gave us. However, git will resolve symlinks when converting
the relative path into an absolute one, leading them to be
textually different (even though they point to the same
directory).
Fix this by asking pwd to canonicalize the name of the trash
directory for us.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
tests: print failed test numbers at the end of the test run
|
|
On modern multi-core processors "make test" is often run in multiple jobs.
If one of them fails the test run does stop, but the concurrently running
tests finish their run. It is rather easy to find out which test failed by
doing a "ls -d t/trash*". But that only works when you don't use the "-i"
option to "make test" because you want to get an overview of all failing
tests. In that case all thrash directories are deleted end and the
information which tests failed is lost.
If one or more tests failed, print a list of them before the test summary:
failed test(s): t1000 t6500
fixed 0
success 7638
failed 3
broken 49
total 7723
This makes it possible to just run the test suite with -i and collect all
failed test scripts at the end for further examination.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dc/stash-con-untracked:
stash: Add --include-untracked option to stash and remove all untracked files
Conflicts:
git-stash.sh
|
|
* jl/submodule-add-relurl-wo-upstream:
submodule add: clean up duplicated code
submodule add: allow relative repository path even when no url is set
submodule add: test failure when url is not configured in superproject
Conflicts:
git-submodule.sh
|
|
The test4012.png test vector file that was originally used for t4012 to
check operations on binary files was later reused in other tests, making
it no longer consistent to name it after a specific test. Rename it to more
generic "test-binary-1.png".
While at it, rename test9200b to "test-binary-2.png" (even though it is
only used by t9200).
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the helper must somehow guess how many import statements to
read before it starts outputting its fast-export stream. This is
because the remote helper infrastructure runs fast-import only once,
so the helper is forced to output one stream for all import commands
it will receive. The only reason this worked in the past was because
only one ref was imported at a time.
Change the semantics of the import statement such that it matches
that of the push statement. That is, the import statement is followed
by a series of import statements that are terminated by a '\n'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a 'done' command that causes fast-import to stop reading from the
stream and exit.
If the new --done command line flag was passed on the command line
(or a "feature done" declaration included at the start of the stream),
make the 'done' command mandatory. So "git fast-import --done"'s
input format will be prefix-free, making errors easier to detect when
they show up as early termination at some convenient time of the
upstream of a pipe writing to fast-import.
Another possible application of the 'done' command would to be allow a
fast-import stream that is only a small part of a larger encapsulating
stream to be easily parsed, leaving the file offset after the "done\n"
so the other application can pick up from there. This patch does not
teach fast-import to do that --- fast-import still uses buffered input
(stdio).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a remote helper exports to a non-local git repo, the
steps are roughly:
1. fast-export into a local staging area; the set of
interesting refs is defined by what is in the fast-export
stream
2. git push from the staging area to the non-local repo
In the second step, we should explicitly push all refs, not
just matching ones. This will let us push refs that do not
yet exist in the remote repo.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we want to push to a remote helper that has the
"export" capability, we collect all of the refs we want to
push and then feed them to fast-export.
However, the list of refs is actually a list of remote refs,
not local refs. The mapped local refs are included via the
peer_ref pointer. So when we add an argument to our
fast-export command line, we must be sure to use the local
peer_ref name (and if there is no local name, it is because
we are not actually sending that ref, or we may not even
have the ref at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Upon receiving an "import" command, the testgit remote
helper would ignore the ref asked for by git and generate a
fast-export stream based on HEAD. Instead, we should
actually give git the ref it asked for.
This requires adding a new parameter to the export_repo
method in the remote-helpers python library, which may be
used by code outside of git.git. We use a default parameter
so that callers without the new parameter will get the same
behavior as before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are all things one might expect to work in a helper
that is capable of handling multiple branches (which our
testgit helper in theory should be able to do, as it is
backed by git). All of these bugs are specific to the
import/export codepaths, so they don't affect helpers like
git-remote-curl that use fetch/push commands.
The first and fourth tests are about fetching and pushing
new refs, and demonstrate bugs in the git_remote_helpers
library (so they would be most likely to impact helpers for
other VCSs which import/export git).
The second test is about importing multiple refs; it
demonstrates a bug in git-remote-testgit, which is mostly
for exercising the test code. Therefore it probably doesn't
affect anyone in practice.
The third test demonstrates a bug in git's side of the
helper code when the upstream has added refs that we do not
have locally. This could impact git users who use remote
helpers to access foreign VCSs.
All of those bugs have fixes later in this series.
The fifth test is the most complex, and does not have a fix
in this series. It tests pushing a ref via the export
mechanism to a new name on the remote side (i.e.,
"git push $remote old:new").
The problem is that we push all of the work of generating
the export stream onto fast-export, but we have no way of
communicating to fast-export that this name mapping is
happening. So we tell fast-export to generate a stream with
the commits for "old", but we can't tell it to label them
all as "new".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All tests require python 2.4 or higher.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are a little hard to read, and I'm about to add more
just like them. Plus the failure output is nicer if we use
test_cmp than a comparison with "test".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
|
|
* jc/submodule-sync-no-auto-vivify:
submodule add: always initialize .git/config entry
submodule sync: do not auto-vivify uninteresting submodule
Conflicts:
git-submodule.sh
|
|
* jk/archive-tar-filter:
upload-archive: allow user to turn off filters
archive: provide builtin .tar.gz filter
archive: implement configurable tar filters
archive: refactor file extension format-guessing
archive: move file extension format-guessing lower
archive: pass archiver struct to write_archive callback
archive: refactor list of archive formats
archive-tar: don't reload default config options
archive: reorder option parsing and config reading
|
|
* jk/clone-cmdline-config:
clone: accept config options on the command line
config: make git_config_parse_parameter a public function
remote: use new OPT_STRING_LIST
parse-options: add OPT_STRING_LIST helper
|
|
* jk/maint-config-param:
config: use strbuf_split_str instead of a temporary strbuf
strbuf: allow strbuf_split to work on non-strbufs
config: avoid segfault when parsing command-line config
config: die on error in command-line config
fix "git -c" parsing of values with equals signs
strbuf_split: add a max parameter
|
|
* jk/tag-list-multiple-patterns:
tag: accept multiple patterns for --list
|
|
Because "diff --cached HEAD" showed an incorrect blob object name on the
LHS of the diff, we ended up updating the index entry with bogus value,
not what we read from the tree.
Noticed by John Nowak.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bc/submodule-foreach-stdin-fix-1.7.4:
git-submodule.sh: preserve stdin for the command spawned by foreach
t/t7407: demonstrate that the command called by 'submodule foreach' loses stdin
Conflicts:
git-submodule.sh
|
|
* jl/maint-fetch-recursive-fix:
fetch: Also fetch submodules in subdirectories in on-demand mode
|
|
* aw/rebase-i-p:
rebase -i -p: include non-first-parent commits in todo list
|
|
* jc/no-gitweb-test-without-cgi-etc:
t/gitweb-lib.sh: skip gitweb tests when perl dependencies are not met
|
|
* fg/submodule-keep-updating:
git-submodule.sh: clarify the "should we die now" logic
submodule update: continue when a checkout fails
git-sh-setup: add die_with_status
Conflicts:
git-submodule.sh
|
|
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. The user-supplied
command supplied to 'submodule foreach' is spawned within a while loop
which is being piped into. Due to the way shells implement piping output
to a while loop, a subshell is created with its standard input attached to
the output of the pipe. This results in all of the commands executed
within the while loop to have their stdins modified in the same way,
including the user-supplied command.
This can cause a problem if the command requires reading from stdin or if
it changes its behavior based on whether stdin is a tty or not. For
example, this problem was noticed when trying to execute the following:
git submodule foreach git shortlog --since=two.weeks.ago
which printed a message about entering the first submodule and produced no
further output and exited with a status of zero. In this case, shortlog
detected that it was not connected to a tty, and since no revision was
supplied as an argument, it attempted to read the list of revisions from
standard input. Instead, it slurped up the list of submodules that was
being piped to the enclosing while loop and caused that loop to end early
without processing the remaining submodules.
Work around this behavior by saving the original standard input file
descriptor before the while loop, and restoring it when spawning the
user-supplied command.
This fixes the tests in t7407.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. This can cause a problem
if the command requires reading from stdin or if it changes its behavior
based on whether stdin is a tty or not (e.g. git shortlog). Demonstrate
this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/streaming-filter:
t0021: test application of both crlf and ident
t0021-conversion.sh: fix NoTerminatingSymbolAtEOF test
streaming: filter cascading
streaming filter: ident filter
Add LF-to-CRLF streaming conversion
stream filter: add "no more input" to the filters
Add streaming filter API
convert.h: move declarations for conversion from cache.h
|
|
* da/git-prefix-everywhere:
t/t7503-pre-commit-hook.sh: Add GIT_PREFIX tests
git-mergetool--lib: Make vimdiff retain the current directory
git: Remove handling for GIT_PREFIX
setup: Provide GIT_PREFIX to built-ins
|
|
* ab/i18n-scripts: (48 commits)
i18n: git-bisect bisect_next_check "You need to" message
i18n: git-bisect [Y/n] messages
i18n: git-bisect bisect_replay + $1 messages
i18n: git-bisect bisect_reset + $1 messages
i18n: git-bisect bisect_run + $@ messages
i18n: git-bisect die + eval_gettext messages
i18n: git-bisect die + gettext messages
i18n: git-bisect echo + eval_gettext message
i18n: git-bisect echo + gettext messages
i18n: git-bisect gettext + echo message
i18n: git-bisect add git-sh-i18n
i18n: git-stash drop_stash say/die messages
i18n: git-stash "unknown option" message
i18n: git-stash die + eval_gettext $1 messages
i18n: git-stash die + eval_gettext $* messages
i18n: git-stash die + eval_gettext messages
i18n: git-stash die + gettext messages
i18n: git-stash say + gettext messages
i18n: git-stash echo + gettext message
i18n: git-stash add git-sh-i18n
...
|
|
* rs/grep-color:
grep: add --heading
grep: add --break
grep: fix coloring of hunk marks between files
|
|
* jc/maint-1.7.3-checkout-describe:
checkout -b <name>: correctly detect existing branch
|
|
* jk/maint-1.7.2-status-ignored:
git status --ignored: tests and docs
status: fix bug with missing --ignore files
Conflicts:
Documentation/git-status.txt
t/t7508-status.sh
|
|
* mg/diff-stat-count:
diff --stat-count: finishing touches
diff-options.txt: describe --stat-{width,name-width,count}
diff: introduce --stat-lines to limit the stat lines
diff.c: omit hidden entries from namelen calculation with --stat
|
|
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
|
|
* git://bogomips.org/git-svn:
git-svn: Correctly handle root commits in mergeinfo ranges
git-svn: Disambiguate rev-list arguments to improve error message
git-svn: Demonstrate a bug with root commits in mergeinfo ranges
|
|
* maint-1.7.5:
test: skip clean-up when running under --immediate mode
"branch -d" can remove more than one branches
|
|
Some tests try to be too careful about cleaning themselves up and
do
test_expect_success description '
set-up some test refs and/or configuration &&
test_when_finished "revert the above changes" &&
the real test
'
Which is nice to make sure that a potential failure would not have
unexpected interaction with the next test. This however interferes when
"the real test" fails and we want to see what is going on, by running the
test with --immediate mode and descending into its trash directory after
the test stops. The precondition to run the real test and cause it to fail
is all gone after the clean-up procedure defined by test_when_finished is
done.
Update test_run_ which is the workhorse of running a test script
called from test_expect_success and test_expect_failure, so that we do not
run clean-up script defined with test_when_finished when a test that is
expected to succeed fails under the --immediate mode.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
|
|
If the bottom of a mergeinfo range is a commit that maps to a git root
commit, then it doesn't have a parent. In such a case, use git commit
range "$top_commit" rather than "$bottom_commit^..$top_commit".
[ew: line-wrap at 80 columns]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
If a svn:mergeinfo range starts at a commit that was converted as a
git root commit (e.g., r1 or a branch that was created out of thin
air), then there is an error when git-svn tries to run
git rev-list "$bottom_commit^..$top_commit"
because $bottom_commit (the git commit corresponding to r1) has no
parent.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
Junio C Hamano
Pete Wyckoff
Jeff King
Jens Lehmann
Vitaliy Ivanov
Sverre Rabbelier
Brandon Casey
Michael Haggerty