| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts d95138e6 (setup: set env $GIT_WORK_TREE when work tree
is set, like $GIT_DIR, 2015-06-26).
It has caused three regression reports so far.
http://article.gmane.org/gmane.comp.version-control.git/281608
http://article.gmane.org/gmane.comp.version-control.git/281979
http://article.gmane.org/gmane.comp.version-control.git/282691
All of them are about spawning git subprocesses, where the new
presence of GIT_WORK_TREE either changes command behaviour (git-init
or git-clone), or how repo/worktree is detected (from aliases), with
or without $GIT_DIR.
The original bug will be re-fixed another way.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the test case, we run setup_git_dir_gently() the first time to read
$GIT_DIR/config so that we can resolve aliases. We'll enter
setup_discovered_git_dir() and may or may not call set_git_dir() near
the end of the function, depending on whether the detected git dir is
".git" or not. This set_git_dir() will set env var $GIT_DIR.
For normal repo, git dir detected via setup_discovered_git_dir() will be
".git", and set_git_dir() is not called. If .git file is used however,
the git dir can't be ".git" and set_git_dir() is called and $GIT_DIR
set. This is the key of this problem.
If we expand an alias (or autocorrect command names), then
setup_git_dir_gently() is run the second time. If $GIT_DIR is not set in
the first run, we run the same setup_discovered_git_dir() as before.
Nothing to see. If it is, however, we'll enter setup_explicit_git_dir()
this time.
This is where the "fun" is. If $GIT_WORK_TREE is not set but
$GIT_DIR is, you are supposed to be at the root level of the
worktree. But if you are in a subdir "foo/bar" (real worktree's top
is "foo"), this rule bites you: your detected worktree is now
"foo/bar", even though the first run correctly detected worktree as
"foo". You get "internal error: work tree has already been set" as a
result.
Bottom line is, when $GIT_DIR is set, $GIT_WORK_TREE should be set too
unless there's no work tree. But setting $GIT_WORK_TREE inside
set_git_dir() may backfire. We don't know at that point if work tree is
already configured by the caller. So set it when work tree is
detected. It does not harm if $GIT_WORK_TREE is set while $GIT_DIR is
not.
Reported-by: Bjørnar Snoksrud <snoksrud@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.9:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* jk/dotgit-case-maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
Our is_hfs_dotgit function relies on the hackily-implemented
next_hfs_char to give us the next character that an HFS+
filename comparison would look at. It's hacky because it
doesn't implement the full case-folding table of HFS+; it
gives us just enough to see if the path matches ".git".
At the end of next_hfs_char, we use tolower() to convert our
32-bit code point to lowercase. Our tolower() implementation
only takes an 8-bit char, though; it throws away the upper
24 bits. This means we can't have any false negatives for
is_hfs_dotgit. We only care about matching 7-bit ASCII
characters in ".git", and we will correctly process 'G' or
'g'.
However, we _can_ have false positives. Because we throw
away the upper bits, code point \u{0147} (for example) will
look like 'G' and get downcased to 'g'. It's not known
whether a sequence of code points whose truncation ends up
as ".git" is meaningful in any language, but it does not
hurt to be more accurate here. We can just pass out the full
32-bit code point, and compare it manually to the upper and
lowercase characters we care about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.9:
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.8.5:
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* dotgit-case-maint-1.8.5:
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
Now that the index can block pathnames that can be mistaken
to mean ".git" on NTFS and FAT32, it would be helpful for
fsck to notice such problematic paths. This lets servers
which use receive.fsckObjects block them before the damage
spreads.
Note that the fsck check is always on, even for systems
without core.protectNTFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
NTFS.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on NTFS themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git or git~1, meaning mischief is almost
certainly what the tree author had in mind).
Ideally these would be controlled by a separate
"fsck.protectNTFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the index can block pathnames that case-fold to
".git" on HFS+, it would be helpful for fsck to notice such
problematic paths. This lets servers which use
receive.fsckObjects block them before the damage spreads.
Note that the fsck check is always on, even for systems
without core.protectHFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
HFS+.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on HFS+ themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git with invisible Unicode code-points mixed
in, meaning mischief is almost certainly what the tree
author had in mind).
Ideally these would be controlled by a separate
"fsck.protectHFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We complain about ".git" in a tree because it cannot be
loaded into the index or checked out. Since we now also
reject ".GIT" case-insensitively, fsck should notice the
same, so that errors do not propagate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check that fsck notices and complains about confusing
paths in trees. However, there are a few shortcomings:
1. We check only for these paths as file entries, not as
intermediate paths (so ".git" and not ".git/foo").
2. We check "." and ".." together, so it is possible that
we notice only one and not the other.
3. We repeat a lot of boilerplate.
Let's use some loops to be more thorough in our testing, and
still end up with shorter code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not allow ".git" to enter into the index as a path
component, because checking out the result to the working
tree may causes confusion for subsequent git commands.
However, on case-insensitive file systems, ".Git" or ".GIT"
is the same. We should catch and prevent those, too.
Note that technically we could allow this for repos on
case-sensitive filesystems. But there's not much point. It's
unlikely that anybody cares, and it creates a repository
that is unexpectedly non-portable to other systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We should prevent nonsense paths from entering the index in
the first place, as they can cause confusing results if they
are ever checked out into the working tree. We already do
so, but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test case "--amend option copies authorship" specifies that the
git-commit option `--amend` uses the authorship of the replaced
commit for the new commit. Add the omitted check that this property
actually holds.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time, git-log was just "rev-list | diff-tree",
and we did not bother to test it separately. These days git-log
is implemented internally, but we want to make sure that the
rev-list to diff-tree pipeline continues to function. Let's
add a basic sanity test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* zk/log-graph-showsig:
log: fix indentation for --graph --show-signature
|
|
* cb/filter-branch-prune-empty-degenerate-merges:
filter-branch: eliminate duplicate mapped parents
|
|
* jm/dedup-test-config:
t/t7810-grep.sh: remove duplicate test_config()
|
|
* sk/test-cmp-bin:
t5000, t5003: do not use test_cmp to compare binary files
|
|
* lt/request-pull:
fix brown paper bag breakage in t5150-request-pull.sh
|
|
* ep/shell-assign-and-export-vars:
scripts: more "export VAR=VALUE" fixes
scripts: "export VAR=VALUE" construct is not portable
|
|
"%G" (nothing after G) is an invalid pretty format specifier, but
the parser did not notice it as garbage.
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
|
|
During "git rebase --merge", a conflicted patch could not be
skipped with "--skip" if the next one also conflicted.
* bc/fix-rebase-merge-skip:
rebase--merge: fix --skip with two conflicts in a row
|
|
* maint-1.8.5:
annotate: use argv_array
t7300: repair filesystem permissions with test_when_finished
enums: remove trailing ',' after last item in enum
|
|
* pb/trim-trailing-spaces:
t0008: do not depend on 'echo' handling backslashes specially
dir.c:trim_trailing_spaces(): fix for " \ " sequence
|
|
* jk/repack-pack-keep-objects:
repack: s/write_bitmap/&s/ in code
repack: respect pack.writebitmaps
repack: do not accidentally pack kept objects by default
|
|
The git log --graph --show-signature command incorrectly indents the gpg
information about signed commits and merged signed tags. It does not
follow the level of indentation of the current commit.
Example of garbled output:
$ git log --show-signature --graph
* commit 258e0a237cb69aaa587b0a4fb528bb0316b1b776
|\ gpg: Signature made Mon, Jun 30, 2014 13:22:33 EDT using RSA key ID DA08
gpg: Good signature from "Jason Pyeron <jpye...@pdinc.us>"
Merge: 727c355 1ca13ed
| | Author: Jason Pyeron <jpye...@pdinc.us>
| | Date: Mon Jun 30 13:22:29 2014 -0400
| |
| | Merge of 1ca13ed2271d60ba9 branch - rebranding
| |
| * commit 1ca13ed2271d60ba93d40bcc8db17ced8545f172
| | gpg: Signature made Mon, Jun 23, 2014 9:45:47 EDT using RSA key ID DD37
gpg: Good signature from "Stephen Robert Guglielmo <s...@guglielmo.us>"
gpg: aka "Stephen Robert Guglielmo <srguglie...@gmail.com>"
Author: Stephen R Guglielmo <s...@guglielmo.us>
| | Date: Mon Jun 23 09:45:27 2014 -0400
| |
| | Minor URL updates
In log-tree.c modify show_sig_lines() function to call graph_show_oneline()
after each line of gpg information it has printed in order to preserve
the level of indentation for the next output line.
Reported-by: Jason Pyeron <jpyeron@pdinc.us>
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.8.5:
t7300: repair filesystem permissions with test_when_finished
enums: remove trailing ',' after last item in enum
|
|
We create a directory that cannot be removed, confirm that
it cannot be removed, and then fix it like:
chmod 0 foo &&
test_must_fail git clean -d -f &&
chmod 755 foo
If the middle step fails but leaves the directory (e.g., the
bug is that clean does not notice the failure), this
pollutes the test repo with an unremovable directory. Not
only does this cause further tests to fail, but it means
that "rm -rf" fails on the whole trash directory, and the
user has to intervene manually to even re-run the test script.
We can bump the "chmod 755" recovery to a test_when_finished
block to be sure that it always runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When multiple parents of a merge commit get mapped to the same
commit, filter-branch used to pass all instances of the parent
commit to the parent and commit filters and to "git commit-tree" or
"git_commit_non_empty_tree".
This can often happen when extracting a small project from a large
repository; merges can join history with no commits on any branch
which affect the paths being retained. Once the intermediate
commits have been filtered out, all the immediate parents of the
merge commit can end up being mapped to the same commit - either the
original merge-base or an ancestor of it.
"git commit-tree" would display an error but write the commit with
the normalized parents in any case. "git_commit_non_empty_tree"
would fail to notice that the commit being made was in fact a
non-merge commit and would retain it even if a further pass with
"--prune-empty" would discard the commit as empty.
Ensure that duplicate parents are pruned before the parent filter to
make "--prune-empty" idempotent, removing all empty non-merge
commits in a singe pass.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final test in t7510 checks that "--format" placeholders
that look similar to GPG placeholders (but that we don't
actually understand) are passed through. That test was
placed in t7510, since the other GPG placeholder tests are
there. However, it does not have a GPG prerequisite, because
it is not actually checking any signed commits.
This causes the test to erroneously fail when gpg is not
installed on a system, however. Not because we need signed
commits, but because we need _any_ commit to run "git log".
If we don't have gpg installed, t7510 doesn't create any
commits at all.
We can fix this by moving the test into t6006. This is
arguably a better place anyway, because it is where we test
most of the other placeholders (we do not test GPG
placeholders there because of the infrastructure needed to
make signed commits).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mode to run tests with HTTP server tests disabled was broken.
* na/no-http-test-in-the-middle:
t5538: move http push tests out to t5542
|
|
"git status" (and "git commit") behaved as if changes in a modified
submodule are not there if submodule.*.ignore configuration is set,
which was misleading. The configuration is only to unclutter diff
output during the course of development, and should not to hide
changes in the "status" output to cause the users forget to commit
them.
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
|
|
"git show -s" (i.e. show log message only) used to incorrectly emit
an extra blank line after a merge commit.
* mk/show-s-no-extra-blank-line-for-merges:
git-show: fix 'git show -s' to not add extra terminator after merge commit
|
|
The autostash mode of "git rebase -i" did not restore the dirty
working tree state if the user aborted the interactive rebase by
emptying the insn sheet.
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
|
|
"git log --exclude=<glob> --all | git shortlog" worked as expected,
but "git shortlog --exclude=<glob> --all", which is supposed to be
identical to the above pipeline, was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
|
|
On a case insensitive filesystem, merge-recursive incorrectly
deleted the file that is to be renamed to a name that is the same
except for case differences.
* dt/merge-recursive-case-insensitive:
mv: allow renaming to fix case on case insensitive filesystems
merge-recursive.c: fix case-changing merge bug
|
|
"git diff --find-copies-harder" sometimes pretended as if the mode
bits have changed for paths that are marked with assume-unchanged
bit.
* jk/diff-files-assume-unchanged:
run_diff_files: do not look at uninitialized stat data
|
|
"git commit --allow-empty-message -C $commit" did not work when the
commit did not have any log message.
* jk/commit-C-pick-empty:
commit: do not complain of empty messages from -C
|
|
"git blame" assigned the blame to the copy in the working-tree if
the repository is set to core.autocrlf=input and the file used CRLF
line endings.
* bc/blame-crlf-test:
blame: correctly handle files regardless of autocrlf
|
|
"--ignore-space-change" option of "git apply" ignored the spaces
at the beginning of line too aggressively, which is inconsistent
with the option of the same name "diff" and "git diff" have.
* jc/apply-ignore-whitespace:
apply --ignore-space-change: lines with and without leading whitespaces do not match
|
|
The "%<(10,trunc)%s" pretty format specifier in the log family of
commands is used to truncate the string to a given length (e.g. 10
in the example) with padding to column-align the output, but did
not take into account that number of bytes and number of display
columns are different.
* as/pretty-truncate:
pretty.c: format string with truncate respects logOutputEncoding
t4205, t6006: add tests that fail with i18n.logOutputEncoding set
t4205 (log-pretty-format): use `tformat` rather than `format`
t4041, t4205, t6006, t7102: don't hardcode tested encoding value
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
|
|
If the user asks for --format=%G with nothing else, we
correctly realize that "%G" is not a valid placeholder (it
should be "%G?", "%GK", etc). But we still tell the
strbuf_expand code that we consumed 2 characters, causing it
to jump over the trailing NUL and output garbage.
This also fixes the case where "%GX" would be consumed (and
produce no output). In other cases, we pass unrecognized
placeholders through to the final string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not check these along with the other pretty-format
placeholders in t6006, because we need signed commits to
make them interesting. t7510 has such commits, and can
easily exercise them in addition to the regular
--show-signature code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We tested both good and bad signatures, but not ones made
correctly but with a key for which we have no trust.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check multiple commits in a loop. Because we want to
break out of the loop if any single iteration fails, we use
a subshell/exit like:
(
for i in $stuff
do
do-something $i || exit 1
done
)
However, we are inconsistent in our loop body. Some commands
get their own "|| exit 1", and others try to chain to the
next command with "&&", like:
X &&
Y || exit 1
Z || exit 1
This is a little hard to read and follow, because X and Y
are treated differently for no good reason. But much worse,
the second loop follows a similar pattern and gets it wrong.
"Y" is expected to fail, so we use "&& exit 1", giving us:
X &&
Y && exit 1
Z || exit 1
That gets the test for X wrong (we do not exit unless both X
fails and Y unexpectedly succeeds, but we would want to exit
if _either_ is wrong). We can write this clearly and
correctly by consistently using "&&", followed by a single
"|| exit 1", and negating Y with "!" (as we would in a
normal &&-chain). Like:
X &&
! Y &&
Z || exit 1
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Nguyễn Thái Ngọc Duy
Junio C Hamano
Jeff King
Johannes Schindelin
Fabian Ruch
Zoltan Klinger
Charles Bailey
Michael J Gruber