| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Instead of typing four capital letters "HEAD", you can say "@" now,
e.g. "git log @".
* fc/at-head:
Add new @ shortcut for HEAD
sha1-name: pass len argument to interpret_branch_name()
|
|
"git check-ignore" follows the same rule as "git add" and "git
status" in that the ignore/exclude mechanism does not take effect
on paths that are already tracked. With "--no-index" option, it
can be used to diagnose which paths that should have been ignored
have been mistakenly added to the index.
* dw/check-ignore-sans-index:
check-ignore: Add option to ignore index contents
|
|
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
|
|
Just like "make -C <directory>", make "git -C <directory> ..." to
go there before doing anything else.
* nr/git-cd-to-a-directory:
t0056: "git -C" test updates
git: run in a directory given with -C option
|
|
Fix a minor regression in v1.8.3.2 and later that made it
impossible to base your local work on anything but a local branch
of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
|
|
Just like "git checkout -" knows to check out and "git merge -"
knows to merge the branch you were previously on, "git cherry-pick"
now understands "git cherry-pick -" to pick from the previous
branch.
* hu/cherry-pick-previous-branch:
cherry-pick: allow "-" as abbreviation of '@{-1}'
|
|
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
|
|
Make "foo^{tag}" to peel a tag to itself, i.e. no-op., and fail if
"foo" is not a tag. "git rev-parse --verify v1.0^{tag}" would be a
more convenient way to say "test $(git cat-file -t v1.0) = tag".
* rh/peeling-tag-to-tag:
peel_onion: do not assume length of x_type globals
peel_onion(): add support for <rev>^{tag}
|
|
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
|
|
When there is no sufficient overlap between old and new history
during a fetch into a shallow repository, we unnecessarily sent
objects the sending side knows the receiving end has.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
|
|
Instead of repeating the text to record as the commit log message
and string we expect to see in "log" output, use the same variable
to avoid them going out of sync.
Use different names for test files in different directories to
improve our chance to catch future breakages that makes "-C <dir>"
go to a place that is different from what was specified.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ks/p4-view-spec:
git p4: implement view spec wildcards with "p4 where"
git p4 test: sanitize P4CHARSET
|
|
A packfile that stores the same object more than once is broken and
will be rejected by "git index-pack" that is run when receiving data
over the wire.
* jk/duplicate-objects-in-packs:
t5308: check that index-pack --strict detects duplicate objects
test index-pack on packs with recoverable delta cycles
add tests for indexing packs with delta cycles
sha1-lookup: handle duplicate keys with GIT_USE_LOOKUP
test-sha1: add a binary output mode
|
|
We made sure that we notice the user-supplied GIT_DIR is actually a
gitfile, but did not do the same when the default ".git" is a gitfile.
* nd/git-dir-pointing-at-gitfile:
Make setup_git_env() resolve .git file when $GIT_DIR is not specified
|
|
* fc/t3200-fixes:
t: branch: fix broken && chains
t: branch: fix typo
t: branch: trivial style fix
|
|
Modernize tests.
* fc/rev-parse-test-updates:
rev-parse test: use standard test functions for setup
rev-parse test: use test_cmp instead of "test" builtin
rev-parse test: use test_must_fail, not "if <command>; then false; fi"
rev-parse test: modernize quoting and whitespace
|
|
Remove now disused remote-helpers framework for helpers written in
Python.
* jk/remove-remote-helpers-in-python:
git_remote_helpers: remove little used Python library
|
|
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
|
|
Earlier we started rejecting an attempt to add 0{40} object name to
the index and to tree objects, but it sometimes is necessary to
allow so to be able to use tools like filter-branch to correct such
broken tree objects.
* jk/write-broken-index-with-nul-sha1:
write_index: optionally allow broken null sha1s
|
|
On MacOS X, we detected if the filesystem needs the "pre-composed
unicode strings" workaround, but did not automatically enable it.
Now we do.
* tb/precompose-autodetect-fix:
Set core.precomposeunicode to true on e.g. HFS+
|
|
Some tests were not skipped under NO_PERL build.
* kk/tests-with-no-perl:
reset test: modernize style
t/t7106-reset-unborn-branch.sh: Add PERL prerequisite
add -i test: use skip_all instead of repeated PERL prerequisite
Make test "using invalid commit with -C" more strict
|
|
"git commit --author=$name", when $name is not in the canonical
"A. U. Thor <au.thor@example.xz>" format, looks for a matching name
from existing history, but did not consult mailmap to grab the
preferred author name.
* ap/commit-author-mailmap:
commit: search author pattern against mailmap
|
|
* maint:
t7406-submodule-update: add missing &&
|
|
62d94a3a (t3200: Add test demonstrating minor regression in 41c21f2;
2013-09-08) introduced a test which creates a directory named 'a',
however, on case-insensitive filesystems, this action fails with a
"fatal: cannot mkdir a: File exists" error due to a file named 'A' left
over from earlier tests. Resolve this problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
2556b996 (status: disable display of '#' comment prefix by default;
2013-09-06) introduced tests which fail on Mac OS X due to unportable
use of \t (for TAB) in a sed expression. POSIX [1][2] also disallows
it. Fix this.
[1]: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/sed.html#tag_20_116_13_02
[2]: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_03_02
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
322bb6e (2011 Aug 11) introduced a new subshell at the end of a test
case but omitted a '&&' to join the two; fix this.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
check-ignore currently shows how .gitignore rules would treat untracked
paths. Tracked paths do not generate useful output. This prevents
debugging of why a path became tracked unexpectedly unless that path is
first removed from the index with `git rm --cached <path>`.
The option --no-index tells the command to bypass the check for the
path being in the index and hence allows tracked paths to be checked
too.
Whilst this behaviour deviates from the characteristics of `git add` and
`git status` its use case is unlikely to cause any user confusion.
Test scripts are augmented to check this option against the standard
ignores to ensure correct behaviour.
Signed-off-by: Dave Williams <dave@opensourcesolutions.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/mediawiki-dumb-push-fix:
git-remote-mediawiki: no need to update private ref in non-dumb push
git-remote-mediawiki: use no-private-update capability on dumb push
transport-helper: add no-private-update capability
git-remote-mediawiki: add test and check Makefile targets
|
|
* jc/commit-is-spelled-with-two-ems:
typofix: cherry is spelled with two ars
typofix: commit is spelled with two ems
|
|
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
|
|
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
|
|
The commit object names in the insn sheet that was prepared at the
beginning of "rebase -i" session can become ambiguous as the
rebasing progresses and the repository gains more commits. Make
sure the internal record is kept with full 40-hex object names.
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
|
|
"git rebase -p" internally used the merge machinery, but when
rebasing, there should not be a need for merge summary.
* rt/rebase-p-no-merge-summary:
rebase --preserve-merges: ignore "merge.log" config
|
|
"git pull --rebase" always flattened the history; pull.rebase can
now be set to "preserve" to invoke "rebase --preserve-merges".
* sh/pull-rebase-preserve:
pull: allow pull to preserve merges when rebasing
|
|
"git push --no-thin" was a no-op by mistake.
* nd/push-no-thin:
push: respect --no-thin
|
|
Extend t/t1400-update-ref.sh to cover cases using the --stdin option.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/mailmap-incomplete-line:
mailmap: handle mailmap blobs without trailing newlines
|
|
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
|
|
The auto-tag-following code in "git fetch" tries to reuse the same
transport twice when the serving end does not cooperate and does
not give tags that point to commits that are asked for as part of
the primary transfer. Unfortunately, Git-aware transport helper
interface is not designed to be used more than once, hence this
does not work over smart-http transfer.
* jc/transport-do-not-use-connect-twice-in-fetch:
builtin/fetch.c: Fix a sparse warning
fetch: work around "transport-take-over" hack
fetch: refactor code that fetches leftover tags
fetch: refactor code that prepares a transport
fetch: rename file-scope global "transport" to "gtransport"
t5802: add test for connect helper
|
|
Allow section.<urlpattern>.var configuration variables to be
treated as a "virtual" section.var given a URL, and use the
mechanism to enhance http.* configuration variables.
This is a reroll of Kyle J. McKay's work.
* jc/url-match:
builtin/config.c: compilation fix
config: "git config --get-urlmatch" parses section.<url>.key
builtin/config: refactor collect_config()
config: parse http.<url>.<variable> using urlmatch
config: add generic callback wrapper to parse section.<url>.key
config: add helper to normalize and match URLs
http.c: fix parsing of http.sslCertPasswordProtected variable
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
Teaches "git blame" to take more than one -L ranges.
* es/blame-L-twice:
line-range: reject -L line numbers less than 1
t8001/t8002: blame: add tests of -L line numbers less than 1
line-range: teach -L^:RE to search from start of file
line-range: teach -L:RE to search from end of previous -L range
line-range: teach -L^/RE/ to search from start of file
line-range-format.txt: document -L/RE/ relative search
log: teach -L/RE/ to search from end of previous -L range
blame: teach -L/RE/ to search from end of previous -L range
line-range: teach -L/RE/ to search relative to anchor point
blame: document multiple -L support
t8001/t8002: blame: add tests of multiple -L options
blame: accept multiple -L ranges
blame: inline one-line function into its lone caller
range-set: publish API for re-use by git-blame -L
line-range-format.txt: clarify -L:regex usage form
git-log.txt: place each -L option variation on its own line
|
|
Output from "git log --full-diff -- <pathspec>" looked strange,
because comparison was done with the previous ancestor that touched
the specified <pathspec>, causing the patches for paths outside the
pathspec to show more than the single commit has changed.
Tweak "git reflog -p" for the same reason using the same mechanism.
* tr/log-full-diff-keep-true-parents:
log: use true parents for diff when walking reflogs
log: use true parents for diff even when rewriting
|
|
Rework the reverted change to `cat-file --batch-check`.
* jk/cat-file-batch-optim:
cat-file: only split on whitespace when %(rest) is used
|
|
More fixes to the code to parse the "-L" option in "log" and "blame".
* es/blame-L-more:
blame: reject empty ranges -L,+0 and -L,-0
t8001/t8002: blame: demonstrate acceptance of bogus -L,+0 and -L,-0
blame: reject empty ranges -LX,+0 and -LX,-0
t8001/t8002: blame: demonstrate acceptance of bogus -LX,+0 and -LX,-0
log: fix -L bounds checking bug
t4211: retire soon-to-be unimplementable tests
t4211: log: demonstrate -L bounds checking bug
blame: fix -L bounds checking bug
t8001/t8002: blame: add empty file & partial-line tests
t8001/t8002: blame: demonstrate -L bounds checking bug
t8001/t8002: blame: decompose overly-large test
|
|
* db/http-savecookies:
t5551: Remove header from curl cookie file
http: add http.savecookies option to write out HTTP cookies
|
|
Allow a safer "rewind of the remote tip" push than blind "--force",
by requiring that the overwritten remote ref to be unchanged since
the new history to replace it was prepared.
The machinery is more or less ready. The "--force" option is again
the big red button to override any safety, thanks to J6t's sanity
(the original round allowed --lockref to defeat --force).
The logic to choose the default implemented here is fragile
(e.g. "git fetch" after seeing a failure will update the
remote-tracking branch and will make the next "push" pass,
defeating the safety pretty easily). It is suitable only for the
simplest workflows, and it may hurt users more than it helps them.
* jc/push-cas:
push: teach --force-with-lease to smart-http transport
send-pack: fix parsing of --force-with-lease option
t5540/5541: smart-http does not support "--force-with-lease"
t5533: test "push --force-with-lease"
push --force-with-lease: tie it all together
push --force-with-lease: implement logic to populate old_sha1_expect[]
remote.c: add command line option parser for "--force-with-lease"
builtin/push.c: use OPT_BOOL, not OPT_BOOLEAN
cache.h: move remote/connect API out of it
|
|
Allow fetch.prune and remote.*.prune configuration variables to be set,
and "git fetch" to behave as if "--prune" is given.
"git fetch" that honors remote.*.prune is fine, but I wonder if we
should somehow make "git push" aware of it as well. Perhaps
remote.*.prune should not be just a boolean, but a 4-way "none",
"push", "fetch", "both"?
* ms/fetch-prune-configuration:
fetch: make --prune configurable
|
|
"-" abbreviation is handy for "cherry-pick" like "checkout" and "merge".
It's also good for uniformity that a "-" stands as
the name of the previous branch where a branch name is
accepted and it could not mean any other things like stdin.
Signed-off-by: Hiroshige Umino <hiroshige88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Nazri Ramliy
Eric Sunshine
Tay Ray Chuan
Dave Williams
Felipe Contreras
Brad King
Hiroshige Umino