| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
|
|
Allow diff tool backend to stop early by exiting with a non-zero
status.
* da/difftool:
difftool: add support for --trust-exit-code
difftool--helper: exit when reading a prompt answer fails
|
|
In a tarball extract whose files are all read-only, running GPG
tests would have failed due to unwritable files.
* mg/lib-gpg-ro-safety:
t/lib-gpg: make gpghome files writable
|
|
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
|
|
Teach difftool to exit when a diff tool returns a non-zero exit
code when either --trust-exit-code is specified or
difftool.trustExitCode is true.
Forward exit codes from invoked diff tools to the caller when
--trust-exit-code is used.
Suggested-by: Adri Farr <14farresa@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t/lib-gpg.sh copies the test environment's gpg home to the trash
directory and makes sure the directoty is writable.
Make sure the copied files are writable, too.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An attempt to quit difftool by hitting Ctrl-D (EOF) at its prompt does
not quit it, but is treated as if 'yes' was answered to the prompt and
all following prompts, which is contrary to the user's intent. Fix the
error check.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/push-cert:
push: heed user.signingkey for signed pushes
|
|
* wk/t1304-wo-USER:
t1304: Set LOGNAME even if USER is unset or null
|
|
Splitting pack-objects output into multiple packs is incompatible
with the use of reachability bitmap.
* jk/pack-objects-no-bitmap-when-splitting:
pack-objects: turn off bitmaps when we split packs
|
|
push --signed promises to take user.signingkey as the signing key but
fails to read the config.
Make it do so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow a temporary directory specified to be used while running "git
mergetool" backend.
* da/mergetool-temporary-directory:
t7610-mergetool: add test cases for mergetool.writeToTemp
mergetool: add an option for writing to a temporary directory
|
|
Allow "git mergetool --help" to run outside a Git repository.
* da/mergetool-tool-help:
difftool: don't assume that default sh is sane
mergetool: don't require a work tree for --tool-help
git-sh-setup: move GIT_DIR initialization into a function
mergetool: use more conservative temporary filenames
test-lib-functions: adjust style to match CodingGuidelines
t7610-mergetool: prefer test_config over git config
|
|
The clean-up of this test script was long overdue and is a very
welcome change.
* da/mergetool-tests:
test-lib-functions: adjust style to match CodingGuidelines
t7610-mergetool: use test_config to isolate tests
t7610-mergetool: add missing && and remove commented-out code
t7610-mergetool: use tabs instead of a mix of tabs and spaces
|
|
The API to update refs have been restructured to allow introducing
a true transactional updates later. We would even allow storing
refs in backends other than the traditional filesystem-based one.
* rs/ref-transaction: (25 commits)
ref_transaction_commit: bail out on failure to remove a ref
lockfile: remove unable_to_lock_error
refs.c: do not permit err == NULL
remote rm/prune: print a message when writing packed-refs fails
for-each-ref: skip and warn about broken ref names
refs.c: allow listing and deleting badly named refs
test: put tests for handling of bad ref names in one place
packed-ref cache: forbid dot-components in refnames
branch -d: simplify by using RESOLVE_REF_READING
branch -d: avoid repeated symref resolution
reflog test: test interaction with detached HEAD
refs.c: change resolve_ref_unsafe reading argument to be a flags field
refs.c: make write_ref_sha1 static
fetch.c: change s_update_ref to use a ref transaction
refs.c: ref_transaction_commit: distinguish name conflicts from other errors
refs.c: pass a list of names to skip to is_refname_available
refs.c: call lock_ref_sha1_basic directly from commit
refs.c: refuse to lock badly named refs in lock_ref_sha1_basic
rename_ref: don't ask read_ref_full where the ref came from
refs.c: pass the ref log message to _create/delete/update instead of _commit
...
|
|
A new filter to programatically edit the tail end of the commit log
messages.
* cc/interpret-trailers:
Documentation: add documentation for 'git interpret-trailers'
trailer: add tests for commands in config file
trailer: execute command from 'trailer.<name>.command'
trailer: add tests for "git interpret-trailers"
trailer: add interpret-trailers command
trailer: put all the processing together and print
trailer: parse trailers from file or stdin
trailer: process command line trailer arguments
trailer: read and process config information
trailer: process trailers from input message and arguments
trailer: add data structures and basic functions
|
|
* ta/config-set:
t1308: fix broken here document in test script
|
|
Test scripts were taught to notice "-x" option to show shell trace,
as if the tests were run under "sh -x".
* jk/test-shell-trace:
test-lib.sh: support -x option for shell-tracing
t5304: use helper to report failure of "test foo = bar"
t5304: use test_path_is_* instead of "test -f"
|
|
This reverts commit 10f343ea814f5c18a0913997904ee11cd9b7da24, whose
output is no longer bit-for-bit equivalent from the older versions
of Git, which the infrastructure to (pretend to) upload tarballs
kernel.org uses depends on.
|
|
Avoid:
# ./t1304-default-acl.sh
ok 1 - checking for a working acl setup
ok 2 - Setup test repo
not ok 3 - Objects creation does not break ACLs with restrictive umask
#
# # SHA1 for empty blob
# check_perms_and_acl .git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
#
not ok 4 - git gc does not break ACLs with restrictive umask
#
# git gc &&
# check_perms_and_acl .git/objects/pack/*.pack
#
# failed 2 among 4 test(s)
1..4
on systems where USER isn't set. It's usually set by the login
process, but it isn't set when launching some Docker images. For
example:
$ docker run --rm debian env
HOME=/
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=b2dfdfe797ed
'id -u -n' has been in POSIX from Issue 2 through 2013 [1], so I don't
expect compatibility issues.
[1]: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/id.html
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a pack.packSizeLimit is set, we may split the pack data
across multiple packfiles. This means we cannot generate
.bitmap files, as they require that all of the reachable
objects are in the same pack. We check that condition when
we are generating the list of objects to pack (and disable
bitmaps if we are not packing everything), but we forgot to
update it when we notice that we needed to split (which
doesn't happen until the actual write phase).
The resulting bitmaps are quite bogus (they mention entries
that do not exist in the pack!) and can cause a fetch or
push to send insufficient objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we pack all objects, we use only the objects reachable
from references and reflogs. This misses any objects which
are reachable from the index, but not yet referenced.
By itself this isn't a big deal; the objects can remain
loose until they are actually used in a commit. However, it
does create a problem when we drop packed but unreachable
objects. We try to optimize out the writing of objects that
we will immediately prune, which means we must follow the
same rules as prune in determining what is reachable. And
prune uses the index for this purpose.
This is rather uncommon in practice, as objects in the index
would not usually have been packed in the first place. But
it could happen in a sequence like:
1. You make a commit on a branch that references blob X.
2. You repack, moving X into the pack.
3. You delete the branch (and its reflog), so that X is
unreferenced.
4. You "git add" blob X so that it is now referenced only
by the index.
5. You repack again with git-gc. The pack-objects we
invoke will see that X is neither referenced nor
recent and not bother loosening it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is currently no easy way to ask the revision traversal
machinery to include objects reachable from the index (e.g.,
blobs and trees that have not yet been committed). This
patch adds an option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's not unreasonable to have a tag that points to a blob
that is not part of the normal history. We do this in
git.git to distribute gpg keys. However, we never explicitly
checked in our test suite that this actually works (i.e.,
that pack-objects actually sends the blob because of the tag
mentioning it).
It does in fact work fine, but a recent patch under
discussion broke this, and the test suite didn't notice.
Let's make the test suite more complete.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests to ensure that filenames start with "./" when
mergetool.writeToTemp is false and do not start with "./" when
mergetool.writeToTemp is true.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prefer "test" over "[ ]" for conditionals.
Prefer "$()" over backticks for command substitutions.
Avoid control structures on a single line with semicolons.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we try to write a loose object file, we first check
whether that object already exists. If so, we skip the
write as an optimization. However, this can interfere with
prune's strategy of using mtimes to mark files in progress.
For example, if a branch contains a particular tree object
and is deleted, that tree object may become unreachable, and
have an old mtime. If a new operation then tries to write
the same tree, this ends up as a noop; we notice we
already have the object and do nothing. A prune running
simultaneously with this operation will see the object as
old, and may delete it.
We can solve this by "freshening" objects that we avoid
writing by updating their mtime. The algorithm for doing so
is essentially the same as that of has_sha1_file. Therefore
we provide a new (static) interface "check_and_freshen",
which finds and optionally freshens the object. It's trivial
to implement freshening and simple checking by tweaking a
single parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent commit taught git-prune to keep non-recent objects
that are reachable from recent ones. However, pack-objects,
when loosening unreachable objects, tries to optimize out
the write in the case that the object will be immediately
pruned. It now gets this wrong, since its rule does not
reflect the new prune code (and this can be seen by running
t6501 with a strategically placed repack).
Let's teach pack-objects similar logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our current strategy with prune is that an object falls into
one of three categories:
1. Reachable (from ref tips, reflogs, index, etc).
2. Not reachable, but recent (based on the --expire time).
3. Not reachable and not recent.
We keep objects from (1) and (2), but prune objects in (3).
The point of (2) is that these objects may be part of an
in-progress operation that has not yet updated any refs.
However, it is not always the case that objects for an
in-progress operation will have a recent mtime. For example,
the object database may have an old copy of a blob (from an
abandoned operation, a branch that was deleted, etc). If we
create a new tree that points to it, a simultaneous prune
will leave our tree, but delete the blob. Referencing that
tree with a commit will then work (we check that the tree is
in the object database, but not that all of its referred
objects are), as will mentioning the commit in a ref. But
the resulting repo is corrupt; we are missing the blob
reachable from a ref.
One way to solve this is to be more thorough when
referencing a sha1: make sure that not only do we have that
sha1, but that we have objects it refers to, and so forth
recursively. The problem is that this is very expensive.
Creating a parent link would require traversing the entire
object graph!
Instead, this patch pushes the extra work onto prune, which
runs less frequently (and has to look at the whole object
graph anyway). It creates a new category of objects: objects
which are not recent, but which are reachable from a recent
object. We do not prune these objects, just like the
reachable and recent ones.
This lets us avoid the recursive check above, because if we
have an object, even if it is unreachable, we should have
its referent. We can make a simple inductive argument that
with this patch, this property holds (that there are no
objects with missing referents in the repository):
0. When we have no objects, we have nothing to refer or be
referred to, so the property holds.
1. If we add objects to the repository, their direct
referents must generally exist (e.g., if you create a
tree, the blobs it references must exist; if you create
a commit to point at the tree, the tree must exist).
This is already the case before this patch. And it is
not 100% foolproof (you can make bogus objects using
`git hash-object`, for example), but it should be the
case for normal usage.
Therefore for any sequence of object additions, the
property will continue to hold.
2. If we remove objects from the repository, then we will
not remove a child object (like a blob) if an object
that refers to it is being kept. That is the part
implemented by this patch.
Note, however, that our reachability check and the
actual pruning are not atomic. So it _is_ still
possible to violate the property (e.g., an object
becomes referenced just as we are deleting it). This
patch is shooting for eliminating problems where the
mtimes of dependent objects differ by hours or days,
and one is dropped without the other. It does nothing
to help with short races.
Naively, the simplest way to implement this would be to add
all recent objects as tips to the reachability traversal.
However, this does not perform well. In a recently-packed
repository, all reachable objects will also be recent, and
therefore we have to look at each object twice. This patch
instead performs the reachability traversal, then follows up
with a second traversal for recent objects, skipping any
that have already been marked.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prefer "test" over "[ ]" for conditionals.
Prefer "$()" over backticks for command substitutions.
Avoid control structures on a single line with semicolons.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently do not handle badly named refs well:
$ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\.
$ git branch
fatal: Reference has invalid format: 'refs/heads/master.....@*@\.'
$ git branch -D master.....@\*@\\.
error: branch 'master.....@*@\.' not found.
Users cannot recover from a badly named ref without manually finding
and deleting the loose ref file or appropriate line in packed-refs.
Making that easier will make it easier to tweak the ref naming rules
in the future, for example to forbid shell metacharacters like '`'
and '"', without putting people in a state that is hard to get out of.
So allow "branch --list" to show these refs and allow "branch -d/-D"
and "update-ref -d" to delete them. Other commands (for example to
rename refs) will continue to not handle these refs but can be changed
in later patches.
Details:
In resolving functions, refuse to resolve refs that don't pass the
git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME
flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to
resolve refs that escape the refs/ directory and do not match the
pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD").
In locking functions, refuse to act on badly named refs unless they
are being deleted and either are in the refs/ directory or match [A-Z_]*.
Just like other invalid refs, flag resolved, badly named refs with the
REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them
in all iteration functions except for for_each_rawref.
Flag badly named refs (but not symrefs pointing to badly named refs)
with a REF_BAD_NAME flag to make it easier for future callers to
notice and handle them specially. For example, in a later patch
for-each-ref will use this flag to detect refs whose names can confuse
callers parsing for-each-ref output.
In the transaction API, refuse to create or update badly named refs,
but allow deleting them (unless they try to escape refs/ and don't match
[A-Z_]*).
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no straightforward way to grep for all tests dealing with
invalid refs. Put them in a single test script so it is easy to see
what functionality has not been exercised with bad ref names yet.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a repository gets in a broken state with too much symref nesting,
it cannot be repaired with "git branch -d":
$ git symbolic-ref refs/heads/nonsense refs/heads/nonsense
$ git branch -d nonsense
error: branch 'nonsense' not found.
Worse, "git update-ref --no-deref -d" doesn't work for such repairs
either:
$ git update-ref -d refs/heads/nonsense
error: unable to resolve reference refs/heads/nonsense: Too many levels of symbolic links
Fix both by teaching resolve_ref_unsafe a new RESOLVE_REF_NO_RECURSE
flag and passing it when appropriate.
Callers can still read the value of a symref (for example to print a
message about it) with that flag set --- resolve_ref_unsafe will
resolve one level of symrefs and stop there.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A proposed patch produced broken HEAD reflog entries when checking out
anything other than a branch. The testsuite still passed, so it took
a few days for the bug to be noticed.
Add tests checking the content of the reflog after detaching and
reattaching HEAD so we don't have to rely on manual testing to catch
such problems in the future.
[jn: using 'log -g --format=%H' instead of parsing --oneline output,
resetting state in each test so they can be safely reordered or
skipped]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests for 'git mv moves a submodule' functionality often run
commands like
git mv sub mod/sub
to move a submodule into a subdirectory. Just like plain /bin/mv,
this is supposed to succeed if the mod/ parent directory exists
and fail if it doesn't exist.
Usually these tests mkdir the parent directory beforehand, but some
instead rely on it being left behind by previous tests.
More precisely, when 'git reset --hard' tries to move to a state where
mod/sub is not present any more, it would perform the following
operations:
rmdir("mod/sub")
rmdir("mod")
The first fails with ENOENT because the test script removed mod/sub
with "rm -rf" already, so 'reset --hard' doesn't bother to move on to
the second, and the mod/ directory is kept around.
Better to explicitly remove and re-create the mod/ directory so later
tests don't have to depend on the directory left behind by the earlier
ones at all (making it easier to rearrange or skip some tests in the
file or to tweak 'reset --hard' behavior without breaking unrelated
tests).
Noticed while testing a patch that fixes the reset --hard behavior
described above.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/sha1-array-test:
sha1-lookup: handle duplicates in sha1_pos()
sha1-array: add test-sha1-array and basic tests
|
|
* sk/tag-contains-wo-recursion:
t7004: give the test a bit more stack space
|
|
This fixes a topic that has graduated to 'master'.
* dt/cache-tree-repair:
t0090: avoid passing empty string to printf %d
|
|
Usually running a test under "-v" makes it clear which
command is failing. However, sometimes it can be useful to
also see a complete trace of the shell commands being run in
the test. You can do so without any support from the test
suite by running "sh -x tXXXX-foo.sh". However, this
produces quite a large bit of output, as we see a trace of
the entire test suite.
This patch instead introduces a "-x" option to the test
scripts (i.e., "./tXXXX-foo.sh -x"). When enabled, this
turns on "set -x" only for the tests themselves. This can
still be a bit verbose, but should keep things to a more
manageable level. You can even use "--verbose-only" to see
the trace only for a specific test.
The implementation is a little invasive. We turn on the "set
-x" inside the "eval" of the test code. This lets the eval
itself avoid being reported in the trace (which would be
long, and redundant with the verbose listing we already
showed). And then after the eval runs, we do some trickery
with stderr to avoid showing the "set +x" to the user.
We also show traces for test_cleanup functions (since they
can impact the test outcome, too). However, we do avoid
running the noop ":" cleanup (the default if the test does
not use test_cleanup at all), as it creates unnecessary
noise in the "set -x" output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
And add a few other tests for some special cases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For small outputs, we sometimes use:
test "$(some_cmd)" = "something we expect"
instead of a full test_cmp. The downside of this is that
when it fails, there is no output at all from the script.
Let's introduce a small helper to make tests easier to
debug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is slightly more robust (checking "! test -f" would not
notice a directory of the same name, though that is not
likely to happen here). It also makes debugging easier, as
the test script will output a message on failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running a required clean filter, we do not have to mmap the
original before feeding the filter. Instead, stream the file
contents directly to the filter and process its output.
* sp/stream-clean-filter:
sha1_file: don't convert off_t to size_t too early to avoid potential die()
convert: stream from fd to required clean filter to reduce used address space
copy_fd(): do not close the input file descriptor
mmap_limit: introduce GIT_MMAP_LIMIT to allow testing expected mmap size
memory_limit: use git_env_ulong() to parse GIT_ALLOC_LIMIT
config.c: add git_env_ulong() to parse environment variable
convert: drop arguments other than 'path' from would_convert_to_git()
|
Junio C Hamano
David Aguilar
René Scharfe
Michael J Gruber
Johannes Sixt
W. Trevor King
Jeff King
Ronnie Sahlberg
Jonathan Nieder
Christian Couder