| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Similar to the commit-graph format, the multi-pack-index format has a
byte in the header intended to track the hash version used to write the
file. This allows one to interpret the hash length without having the
context of the repository config specifying the hash length. This was
not modified as part of the SHA-256 work because the hash length was
automatically up-shifted due to that config.
Since we have this byte available, we can make the file formats more
obviously incompatible instead of relying on other context from the
repository.
Add a new oid_version() method in midx.c similar to the one in
commit-graph.c. This is specifically made separate from that
implementation to avoid artificially linking the formats.
The test impact requires a few more things than the corresponding change
in the commit-graph format. Specifically, 'test-tool read-midx' was not
writing anything about this header value to output. Since the value
available in 'struct multi_pack_index' is hash_len instead of a version
value, we output "20" or "32" instead of "1" or "2".
Since we want a user to not have their Git commands fail if their
multi-pack-index has the incorrect hash version compared to the
repository's hash version, we relax the die() to an error() in
load_multi_pack_index(). This has some effect on 'git multi-pack-index
verify' as we need to check that a failed parse of a file that exists is
actually a verify error. For that test that checks the hash version
matches, we change the corrupted byte from "2" to "3" to ensure the test
fails for both hash algorithms.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph format reserved a byte among the header of the file to
store a "hash version". During the SHA-256 work, this was not modified
because file formats are not necessarily intended to work across hash
versions. If a repository has SHA-256 as its hash algorithm, it
automatically up-shifts the lengths of object names in all necessary
formats.
However, since we have this byte available for adjusting the version, we
can make the file formats more obviously incompatible instead of relying
on other context from the repository.
Update the oid_version() method in commit-graph.c to add a new value, 2,
for sha-256. This automatically writes the new value in a SHA-256
repository _and_ verifies the value is correct. This is a breaking
change relative to the current 'master' branch since 092b677 (Merge
branch 'bc/sha-256-cvs-svn-updates', 2020-08-13) but it is not breaking
relative to any released version of Git.
The test impact is relatively minor: the output of 'test-tool
read-graph' lists the header information, so those instances of '1' need
to be replaced with a variable determined by GIT_TEST_DEFAULT_HASH. A
more careful test is added that specifically creates a repository of
each type then swaps the commit-graph files. The important value here is
that the "git log" command succeeds while writing a message to stderr.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanup.
* ma/test-quote-cleanup:
t4104: modernize and simplify quoting
t: don't spuriously close and reopen quotes
|
|
A new helper function has_object() has been introduced to make it
easier to mark object existence checks that do and don't want to
trigger lazy fetches, and a few such checks are converted using it.
* jt/has_object:
fsck: do not lazy fetch known non-promisor object
pack-objects: no fetch when allow-{any,promisor}
apply: do not lazy fetch when applying binary
sha1-file: introduce no-lazy-fetch has_object()
|
|
The component to respond to "git fetch" request is made more
configurable to selectively allow or reject object filtering
specification used for partial cloning.
* tb/upload-pack-filters:
t5616: use test_i18ngrep for upload-pack errors
upload-pack.c: introduce 'uploadpackfilter.tree.maxDepth'
upload-pack.c: allow banning certain object filter(s)
list_objects_filter_options: introduce 'list_object_filter_config_name'
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
All "mergy" operations that internally use the merge-recursive
machinery should honor the merge.renormalize configuration, but
many of them didn't.
* en/eol-attrs-gotchas:
checkout: support renormalization with checkout -m <paths>
merge: make merge.renormalize work for all uses of merge machinery
t6038: remove problematic test
t6038: make tests fail for the right reason
|
|
Test fix.
* ma/t1450-quotefix:
t1450: fix quoting of NUL byte when corrupting pack
|
|
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
|
|
Drop whitespace in the value of `$test_description` and in a test body
and use `test_write_lines`.
Stop defining `$u` with a trailing space just so that we can tuck it in
like `git foo $u$more...` and get minimal whitespace in the command:
`git foo $u $more...` is more readable at the "cost" of an empty `$u`
yielding `git foo something...`.
Finally, avoid using single quotes within the test scripts to repeatedly
close and reopen the quotes that wrap the test scripts (see the previous
commit). This "unnecessary" quoting does mean that the verbose test
output shows the interpolated values, i.e., the shell code we're
running. But the downside is that the source of the script does *not*
show the shell code we're eventually executing, leaving the reader to
reason about what we really do and whether there are any quoting issues.
(There aren't.)
Where we run through loops to generate several "identical but different"
tests, the test message contains the interpolated variables we're
looping on, meaning one can always identify exactly which instance has
failed, even if the verbose test output shows the exact same test body
several times.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When applying a binary patch, as an optimization, "apply" checks if the
postimage is already present. During this fetch, it is perfectly
expected for the postimage not to be present, so there is no need to
lazy-fetch missing objects. Teach "apply" not to lazy-fetch in this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests added to t5616 in 6dd3456a8c (upload-pack.c: allow banning
certain object filter(s), 2020-08-03) can fail racily, but only with
GETTEXT_POISON enabled.
The tests in question look something like this:
test_must_fail ok=sigpipe git clone --filter=blob:none ... 2>err &&
grep "filter blob:none not supported' err
The remote upload-pack process writes that error message both as an ERR
packet, but also via a die() message. In theory we should see the
message twice in the "err" file. The client relays the message from the
packet to its stderr (with a "remote error:" prefix), and because this
is a local-system clone, upload-pack's stderr goes to the same place.
But because clone may be writing to the pipe when upload-pack calls
die(), it may get SIGPIPE and fail to relay the message. That's why we
need our "ok=sigpipe" trick. But our grep should still work reliably in
that case. Either:
- we got SIGPIPE on the client, which means upload-pack completed its
die(), and we'll see that version of the message.
- the client didn't get SIGPIPE, and so it successfully relays the
message.
In theory we'd see both copies of the message in the second case. But
now always! As soon as the client sees ERR, it exits and we run grep.
But we have no guarantee that the upload-pack process has exited at this
point, or even written its die() message. We might only see the client
version of the message.
Normally that's OK. We only need to see one or the other to pass the
test. But now consider GETTEXT_POISON. upload-pack doesn't translate the
die() message nor the ERR packet. But once the client receives it, it
calls:
die(_("remote error: %s"), buffer + 4);
That message _is_ marked for translation. Normally we'd just replace the
"remote error:" portion of it, but in GETTEXT_POISON mode, we replace
the whole thing with "# GETTEXT POISON #" and don't include the "%s"
part at all. So the whole text from the ERR packet is dropped, and so we
may racily see a test failure if upload-pack's die() call wasn't yet
written.
We can fix it by using test_i18ngrep, which just makes this grep a noop
in the poison mode.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pretend-object mechanism checks if the given object already
exists in the object store before deciding to keep the data
in-core, but the check would have triggered lazy fetching of such
an object from a promissor remote.
* jt/pretend-object-never-come-from-elsewhere:
sha1-file: make pretend_object_file() not prefetch
|
|
While packing many objects in a repository with a promissor remote,
lazily fetching missing objects from the promissor remote one by
one may be inefficient---the code now attempts to fetch all the
missing objects in batch (obviously this won't work for a lazy
clone that lazily fetches tree objects as you cannot even enumerate
what blobs are missing until you learn which trees are missing).
* jt/pack-objects-prefetch-in-batch:
pack-objects: prefetch objects to be packed
pack-objects: refactor to oid_object_info_extended
|
|
In b79cf959b2 (upload-pack.c: allow banning certain object filter(s),
2020-02-26), we introduced functionality to disallow certain object
filters from being chosen from within 'git upload-pack'. Traditionally,
administrators use this functionality to disallow filters that are known
to perform slowly, for e.g., those that do not have bitmap-level
filtering.
In the past, the '--filter=tree:<n>' was one such filter that does not
have bitmap-level filtering support, and so was likely to be banned by
administrators.
However, in the previous couple of commits, we introduced bitmap-level
filtering for the case when 'n' is equal to '0', i.e., as if we had a
'--filter=tree:none' choice.
While it would be sufficient to simply write
$ git config uploadpackfilter.tree.allow true
(since it would allow all values of 'n'), we would like to be able to
allow this filter for certain values of 'n', i.e., those no greater than
some pre-specified maximum.
In order to do this, introduce a new configuration key, as follows:
$ git config uploadpackfilter.tree.maxDepth <m>
where '<m>' specifies the maximum allowed value of 'n' in the filter
'tree:n'. Administrators who wish to allow for only the value '0' can
write:
$ git config uploadpackfilter.tree.allow true
$ git config uploadpackfilter.tree.maxDepth 0
which allows '--filter=tree:0', but no other values.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git clients may ask the server for a partial set of objects, where the
set of objects being requested is refined by one or more object filters.
Server administrators can configure 'git upload-pack' to allow or ban
these filters by setting the 'uploadpack.allowFilter' variable to
'true' or 'false', respectively.
However, administrators using bitmaps may wish to allow certain kinds of
object filters, but ban others. Specifically, they may wish to allow
object filters that can be optimized by the use of bitmaps, while
rejecting other object filters which aren't and represent a perceived
performance degradation (as well as an increased load factor on the
server).
Allow configuring 'git upload-pack' to support object filters on a
case-by-case basis by introducing two new configuration variables:
- 'uploadpackfilter.allow'
- 'uploadpackfilter.<kind>.allow'
where '<kind>' may be one of 'blobNone', 'blobLimit', 'tree', and so on.
Setting the second configuration variable for any valid value of
'<kind>' explicitly allows or disallows restricting that kind of object
filter.
If a client requests the object filter <kind> and the respective
configuration value is not set, 'git upload-pack' will default to the
value of 'uploadpackfilter.allow', which itself defaults to 'true' to
maintain backwards compatibility. Note that this differs from
'uploadpack.allowfilter', which controls whether or not the 'filter'
capability is advertised.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t6038.11, 'cherry-pick patch from after text=auto' was a test of
undefined behavior. To make matters worse, while there are a couple
possible correct answers, this test was coded to only check for an
obviously incorrect answer. And the final cherry on top is that the
test is marked test_expect_failure, meaning it can't provide much value,
other than possibly confusing future folks who come along and try to
work on attributes and look at existing tests. Because of all these
problems, just remove the test.
But for any future code spelunkers, here's my understanding of the two
possible correct answers:
This test was set up so that on a branch with no .gitattributes file,
you cherry-picked a patch from a branch that had a .gitattributes file
(containing '* text=auto'). Further, the two branches had a file which
differed only in line endings. In this situation, correct behavior is
not well defined: should the .gitattributes file affect the merge or
not?
If the .gitattributes file on the other branch should not affect the
merge, then we would have a content conflict with all three stages
different (the merge base didn't match either side).
If the .gitattributes file from the other branch should affect the
merge, then we would expect the line endings to be normalized to LF for
the version to be recorded in the repository. This would mean that when
doing a three-way content merge on the file that differed in line
endings, that the three-way content merge would see that the versions on
both sides matched and so the cherry-pick has no conflicts and can
succeed. The line endings in the file as recorded in the repository
will change from CRLF to LF. The version checked out in the working
copy will depend on the platform (since there's no eol attribute defined
for the file).
Also, as a final side note, this test expected an error message that was
built assuming cherry-pick was the old scripted version, because
cherry-pick no longer uses the error message that was encoded in this
test. So it was wrong for yet another reason.
Given that the handling of .gitattributes is not well defined and this
test was obviously broken and could do nothing but confuse future
readers, just remove it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t6038 had a pair of tests that were expected to fail, but weren't
failing for the expected reason. Both were meant to do a merge that
could be done cleanly after renormalization, but were supposed to fail
for lack of renormalization. Unfortunately, both tests had staged
changes, and checkout -m would abort due to the presence of those staged
changes before even attempting a merge.
Fix this first issue by utilizing git-restore instead of git-checkout,
so that the index is left alone and just the working directory gets the
changes we want.
However, there is a second issue with these tests. Technically, they
just wanted to verify that after renormalization, no conflicts would be
present. This could have been checked for by grepping for a lack of
conflict markers, but the test instead tried to compare the working
directory files to an expected result. Unfortunately, the setting of
"text=auto" without setting core.eol to any value meant that the content
of the file (in particular, the line endings) would be
platform-dependent and the tests could only pass on some platforms.
Replace the existing comparison with a call to 'git diff --no-index
--ignore-cr-at-eol' to verify that the contents, other than possible
carriage returns in the file, match the expected results and in
particular that the file has no conflicts from the checkout -m
operation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use
printf '\0'
to generate a NUL byte which we then `dd` into the packfile to ensure
that we modify the first byte of the first object, thereby
(probabilistically) invalidating the checksum. Except the single quotes
we're using are interpreted to match with the ones we enclose the whole
test in. So we actually execute
printf \0
and end up injecting the ASCII code for "0", 0x30, instead.
The comment right above this `printf` invocation says that "at least one
of [the type bits] is not zero, so setting the first byte to 0 is
sufficient". Substituting "0x30" for "0" in that comment won't do: we'd
need to reason about which bits go where and just what the packfile
looks like that we're modifying in this test.
Let's avoid all of that by actually executing
printf "\0"
to generate a NUL byte, as intended.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Brown-paper-bag fix.
* cc/pretty-contents-size:
t6300: fix issues related to %(contents:size)
|
|
"git merge" learned to selectively omit " into <branch>" at the end
of the title of default merge message with merge.suppressDest
configuration.
* jc/fmt-merge-msg-suppress-destination:
fmt-merge-msg: allow merge destination to be omitted again
Revert "fmt-merge-msg: stop treating `master` specially"
|
|
b6839fda68 (ref-filter: add support for %(contents:size), 2020-07-16)
added a new format for ref-filter, and added a function to generate
tests for this new feature in t6300. Unfortunately, it tries to run
`test_expect_sucess' instead of `test_expect_success', and writes
$expect to `expected', but tries to read `expect'. Those two issues
were probably unnoticed because the script only printed errors, but did
not crash. This fixes these issues.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* en/typofixes:
hashmap: fix typo in usage docs
Remove doubled words in various comments
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix to a regression introduced during 2.27 cycle.
* en/fill-directory-exponential:
dir: check pathspecs before returning `path_excluded`
|
|
"git mv src dst", when src is an unmerged path, errored out
correctly but with an incorrect error message to claim that src is
not tracked, which has been clarified.
* ct/mv-unmerged-path-error:
git-mv: improve error message for conflicted file
|
|
Pushing a ref whose name contains non-ASCII character with the
"--force-with-lease" option did not work over smart HTTP protocol,
which has been corrected.
* bc/push-cas-cquoted-refname:
remote-curl: make --force-with-lease work with non-ASCII ref names
|
|
"git for-each-ref --format=<>" learned %(contents:size).
* cc/pretty-contents-size:
ref-filter: add support for %(contents:size)
t6300: test refs pointing to tree and blob
Documentation: clarify %(contents:XXXX) doc
|
|
Fetching from a lazily cloned repository resulted at the server
side in attempts to lazy fetch objects that the client side has,
many of which will not be available from the third-party anyway.
* jt/avoid-lazy-fetching-upon-have-check:
upload-pack: do not lazy-fetch "have" objects
|
|
Dev support to limit the use of test_must_fail to only git commands.
* dl/test-must-fail-fixes-6:
test-lib-functions: restrict test_must_fail usage
t9400: don't use test_must_fail with cvs
t9834: remove use of `test_might_fail p4`
t7107: don't use test_must_fail()
t5324: reorder `run_with_limited_open_files test_might_fail`
t3701: stop using `env` in force_color()
|
|
With the base fix to 2.27 regresion, any new extensions in a v0
repository would still be silently honored, which is not quite
right. Instead, complain and die loudly.
* jk/reject-newer-extensions-in-v0:
verify_repository_format(): complain about new extensions in v0 repo
|
|
Preliminary clean-up of the refs API in preparation for adding a
new refs backend "reftable".
* hn/reftable:
reflog: cleanse messages in the refs.c layer
bisect: treat BISECT_HEAD as a pseudo ref
t3432: use git-reflog to inspect the reflog for HEAD
lib-t6000.sh: write tag using git-update-ref
|
|
"git clone --separate-git-dir=$elsewhere" used to stomp on the
contents of the existing directory $elsewhere, which has been
taught to fail when $elsewhere is not an empty directory.
* bw/fail-cloning-into-non-empty:
git clone: don't clone into non-empty directory
|
|
The test framework has been updated so that most tests will run
with predictable (artificial) timestamps.
* jk/tests-timestamp-fix:
t9100: stop depending on commit timestamps
test-lib: set deterministic default author/committer date
t9100: explicitly unset GIT_COMMITTER_DATE
t5539: make timestamp requirements more explicit
t9700: loosen ident timezone regex
t6000: use test_tick consistently
|
|
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
|
|
The changed-path Bloom filter is improved using ideas from an
independent implementation.
* sg/commit-graph-cleanups:
commit-graph: simplify write_commit_graph_file() #2
commit-graph: simplify write_commit_graph_file() #1
commit-graph: simplify parse_commit_graph() #2
commit-graph: simplify parse_commit_graph() #1
commit-graph: clean up #includes
diff.h: drop diff_tree_oid() & friends' return value
commit-slab: add a function to deep free entries on the slab
commit-graph-format.txt: all multi-byte numbers are in network byte order
commit-graph: fix parsing the Chunk Lookup table
tree-walk.c: don't match submodule entries for 'submod/anything'
|
|
In Git 2.28, we stopped special casing 'master' when producing the
default merge message by just removing the code to squelch "into
'master'" at the end of the message.
Introduce multi-valued merge.suppressDest configuration variable
that gives a set of globs to match against the name of the branch
into which the merge is being made, to let users specify for which
branch fmt-merge-msg's output should be shortened. When it is not
set, 'master' is used as the sole value of the variable by default.
The above move mostly reverts the pre-2.28 default in repositories
that have no relevant configuration.
Add a few tests to protect the behaviour with the new configuration
variable from future regression.
Helped-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 489947cee5095b168cbac111ff7bd1eadbbd90dd, which
stopped treating merges into the 'master' branch as special when
preparing the default merge message. As the goal was not to have
any single branch designated as special, it solved it by leaving the
"into <branchname>" at the end of the title of the default merge
message for any and all branches. An obvious and easy alternative
to treat everybody equally could have been to remove it for every
branch, but that involves loss of information.
We'll introduce a new mechanism to let end-users specify merges into
which branches would omit the "into <branchname>" from the title of
the default merge message, and make the mechanism, when unconfigured,
treat the traditional 'master' special again, so all the changes to
the tests we made earlier will become unnecessary, as these tests
will be run without configuring the said new mechanism.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we call test_oid_init in the setup for all test scripts,
there's no point in calling it individually. Remove all of the places
where we've done so to help keep tests tidy.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the SHA1 prerequisite depends on the output of git
hash-object. However, in order for that to produce sane behavior, we
must be in a repository. If we are not, the default will remain SHA-1,
and we'll produce wrong results if we're using SHA-256 for the testsuite
but the test assertion starts when we're not in a repository.
Check the environment variable we use for this purpose, leaving it to
default to SHA-1 if none is specified.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To allow developers to run the testsuite with a different algorithm than
the default, provide an environment variable, GIT_TEST_DEFAULT_HASH, to
specify the algorithm to use. Compute the fixed constants using
test_oid. Move the constant initialization down below the point where
test-lib-functions.sh is loaded so the functions are defined.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some tests, we have data files which are written with a particular
hash algorithm. Instead of keeping two copies of the test files, we can
keep one, and translate the value on the fly.
In order to do so, we'll need to read both the source algorithm and the
current algorithm, so add an optional flag to the test_oid helper that
lets us look up a value for a specified hash algorithm. This should
not cause any conflicts with existing tests, since key arguments to
test_oid are allowed to contains only shell identifier characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have a complete SHA-256 implementation in Git, let's enable
it so people can use it. Remove the ENABLE_SHA256 define constant
everywhere it's used. Add tests for initializing a repository with
SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently we detect the hash algorithm in use by the length of the
object ID. This is inelegant and prevents us from using a different
hash algorithm that is also 256 bits in length.
Since we cannot extend the v2 format in a backward-compatible way, let's
add a v3 format, which is identical, except for the addition of
capabilities, which are prefixed by an at sign. We add "object-format"
as the only capability and reject unknown capabilities, since we do not
have a network connection and therefore cannot negotiate with the other
side.
For compatibility, default to the v2 format for SHA-1 and require v3
for SHA-256.
In t5510, always use format v3 so we can be sure we produce consistent
results across hash algorithms. Since head -n N lists the top N lines
instead of the Nth line, let's run our output through sed to normalize
it and compare it against a fixed value, which will make sure we get
exactly what we're expecting.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recently added test in t5702 started using git verify-pack outside of
a repository. While this poses no problems with SHA-1, with SHA-256 we
implicitly rely on the setup of the repository to initialize our hash
algorithm settings.
Since we're not in a repository here, we need to provide git verify-pack
help to set things up properly. git index-pack already knows an
--object-format option, so let's accept one as well and pass it down to
our git index-pack invocation. Since we're now dynamically adjusting
the elements in argv, let's switch to using struct argv_array to manage
them. Finally, let's make t5702 pass the proper argument on down to its
git verify-pack caller.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests try to check that we behave properly if we encounter a
repository with version 0 but an extension. This is a laudable goal,
but the test cannot work with SHA-256, since SHA-256 repositories always
have an existing extension and are never version 0.
Add a SHA1 prerequisite to these tests.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test needs multiple object IDs that have the same first byte.
Update the pack test code to generate a suitable packed value for
SHA-256. Update the test to use this value when using SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Junio C Hamano
Martin Ågren
Jonathan Tan
Jeff King
Taylor Blau
Elijah Newren
Alban Gruin
brian m. carlson