| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/verify-index-checksum-only-in-fsck:
t1450: avoid use of "sed" on the index, which is a binary file
|
|
"git rebase -i" failed to re-read the todo list file when the
command specified with the `exec` instruction updated it.
* sh/rebase-i-reread-todo-after-exec:
rebase -i: reread the todo list if `exec` touched it
|
|
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
|
|
Output from perf tests have been updated to align their titles.
* ab/align-perf-descriptions:
t/perf: correctly align non-ASCII descriptions in output
|
|
In the scripted version of the interactive rebase, there was no internal
representation of the todo list; it was re-read before every command.
That allowed the hack that an `exec` command could append (or even
completely rewrite) the todo list.
This hack was broken by the partial conversion of the interactive rebase
to C, and this patch reinstates it.
We also add a small test to verify that this fix does not regress in the
future.
Signed-off-by: Stephen Hicks <sdh@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous step added a path zzzzzzzz to the index, and then used
"sed" to replace this string to yyyyyyyy to create a test case where
the checksum at the end of the file does not match the contents.
Unfortunately, use of "sed" on a non-text file is not portable.
Instead, use a Perl script that seeks to the end and modifies the
last byte of the file (where we _know_ stores the trailing
checksum).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow to lock a worktree immediately after it's created. This helps
prevent a race between "git worktree add; git worktree lock" and
"git worktree prune".
* nd/worktree-add-lock:
worktree add: add --lock option
|
|
The completion script (in contrib/) learned to complete "git push
--delete b<TAB>" to complete branch name to be deleted.
* ab/completion-push-delete-ref:
completion: expand "push --delete <remote> <ref>" for refs on that <remote>
|
|
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
|
|
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
|
|
Doc update.
* ab/push-cas-doc-n-test:
push: document & test --force-with-lease with multiple remotes
|
|
A recent update broke "git add -p ../foo" from a subdirectory.
* ps/pathspec-empty-prefix-origin:
pathspec: honor `PATHSPEC_PREFIX_ORIGIN` with empty prefix
|
|
Having a git command on the upstream side of a pipe in a test
script will hide the exit status from the command, which may cause
us to fail to notice a breakage; rewrite tests in a script to avoid
this issue.
* pc/t2027-git-to-pipe-cleanup:
t2027: avoid using pipes
|
|
"git rebase" learns "--signoff" option.
* gb/rebase-signoff:
rebase: pass --[no-]signoff option to git am
builtin/am: fold am_signoff() into am_append_signoff()
builtin/am: honor --signoff also when --rebasing
|
|
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"ls-files --recurse-submodules" did not quite work well in a
project with nested submodules.
* jk/ls-files-recurse-submodules-fix:
ls-files: fix path used when recursing into submodules
ls-files: fix recurse-submodules with nested submodules
|
|
Code cleanup.
* km/t1400-modernization:
t1400: use consistent style for test_expect_success calls
|
|
Add finishing touches to a recent topic.
* jk/quarantine-received-objects:
refs: reject ref updates while GIT_QUARANTINE_PATH is set
receive-pack: document user-visible quarantine effects
receive-pack: drop tmp_objdir_env from run_update_hook
|
|
"git submodule" script does not work well with strange pathnames.
Protect it from a path with slashes in them, at least.
* bw/submodule-with-bs-path:
submodule: prevent backslash expantion in submodule names
|
|
The index file has a trailing SHA-1 checksum to detect file
corruption, and historically we checked it every time the index
file is used. Omit the validation during normal use, and instead
verify only in "git fsck".
* jh/verify-index-checksum-only-in-fsck:
read-cache: force_verify_index_checksum
|
|
The string-list API used a custom reallocation strategy that was
very inefficient, instead of using the usual ALLOC_GROW() macro,
which has been fixed.
* jh/string-list-micro-optim:
string-list: use ALLOC_GROW macro when reallocing string_list
|
|
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
|
|
Doc update.
* tb/doc-eol-normalization:
gitattributes.txt: document how to normalize the line endings
|
|
Change the test descriptions from being treated as binary blobs by
perl to being treated as UTF-8. This ensures that e.g. a test
description like "æ" is counted as 1 character, not 2.
I have WIP performance tests for non-ASCII grep patterns on another
topic that are affected by this.
Now instead of:
$ ./run p0000-perf-lib-sanity.sh
[...]
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
[...]
We emit:
[...]
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
[...]
Fixes code originally added in 342e9ef2d9 ("Introduce a performance
testing framework", 2012-02-17).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the completion of "push --delete <remote> <ref>" to complete
refs on that <remote>, not all refs.
Before this cloning git.git and doing "git push --delete origin
p<TAB>" will complete nothing, since a fresh clone of git.git will
have no "pu" branch, whereas origin/p<TAB> will uselessly complete
origin/pu, but fully qualified references aren't accepted by
"--delete".
Now p<TAB> will complete as "pu". The completion of giving --delete
later, e.g. "git push origin --delete p<TAB>" remains unchanged, this
is a bug, but is a general existing limitation of the bash completion,
and not how git-push is documented, so I'm not fixing that case, but
adding a failing TODO test for it.
The testing code was supplied by SZEDER Gábor in
<20170421122832.24617-1-szeder.dev@gmail.com> with minor setup
modifications on my part.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Test-code-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As explained in the document. This option has an advantage over the
command sequence "git worktree add && git worktree lock": there will be
no gap that somebody can accidentally "prune" the new worktree (or soon,
explicitly "worktree remove" it).
"worktree add" does keep a lock on while it's preparing the worktree.
If --lock is specified, this lock remains after the worktree is created.
Suggested-by: David Taylor <David.Taylor@dell.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for a topic that is already in 'master'.
* jh/memihash-opt:
p0004: make perf test executable
t3008: skip lazy-init test on a single-core box
test-online-cpus: helper to return cpu count
name-hash: fix buffer overrun
|
|
* sf/putty-w-args:
connect.c: handle errors from split_cmdline
|
|
"git p4" used "name-rev HEAD" when it wants to learn what branch is
checked out; it should use "symbolic-ref HEAD".
* ld/p4-current-branch-fix:
git-p4: don't use name-rev to get current branch
git-p4: add read_pipe_text() internal function
git-p4: add failing test for name-rev rather than symbolic-ref
|
|
* dt/gc-ignore-old-gc-logs:
t6500: wait for detached auto gc at the end of the test script
|
|
Clean up fallouts from recent tightening of the set-up sequence,
where Git barfs when repository information is accessed without
first ensuring that it was started in a repository.
* jk/no-looking-at-dotgit-outside-repo:
test-read-cache: setup git dir
has_sha1_file: don't bother if we are not in a repository
|
|
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
|
|
If a patch e-mail had its first paragraph after an in-body header
indented (even after a blank line after the in-body header line),
the indented line was mistook as a continuation of the in-body
header. This has been fixed.
* lt/mailinfo-in-body-header-continuation:
mailinfo: fix in-body header continuations
|
|
"git push --recurse-submodules --push-option=<string>" learned to
propagate the push option recursively down to pushes in submodules.
* bw/push-options-recursively-to-submodules:
push: propagate remote and refspec with --recurse-submodules
submodule--helper: add push-check subcommand
remote: expose parse_push_refspec function
push: propagate push-options with --recurse-submodules
push: unmark a local variable as static
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
|
The output from "git status --short" has been extended to show
various kinds of dirtyness in submodules differently; instead of to
"M" for modified, 'm' and '?' can be shown to signal changes only
to the working tree of the submodule but not the commit that is
checked out.
* sb/submodule-short-status:
submodule.c: correctly handle nested submodules in is_submodule_modified
short status: improve reporting for submodule changes
submodule.c: stricter checking for submodules in is_submodule_modified
submodule.c: port is_submodule_modified to use porcelain 2
submodule.c: convert is_submodule_modified to use strbuf_getwholeline
submodule.c: factor out early loop termination in is_submodule_modified
submodule.c: use argv_array in is_submodule_modified
|
|
Created t/perf/repos/many-files.sh to generate large, but
artificial repositories.
Created t/perf/inflate-repo.sh to alter an EXISTING repo
to have a set of large commits. This can be used to create
a branch with 1M+ files in repositories like git.git or
linux.git, but with more realistic content. It does this
by making multiple copies of the entire worktree in a series
of sub-directories.
The branch name and ballast structure created by both scripts
match, so either script can be used to generate very large
test repositories for the following perf test.
Created t/perf/p0006-read-tree-checkout.sh to measure
performance on various read-tree, checkout, and update-index
operations. This test can run using either normal repos or
ones from the above scripts.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document & test for cases where there are two remotes pointing to the
same URL, and a background fetch & subsequent `git push
--force-with-lease` shouldn't clobber un-updated references we haven't
fetched.
Some editors like Microsoft's VSC have a feature to auto-fetch in the
background, this bypasses the protections offered by
--force-with-lease & --force-with-lease=<refname>, as noted in the
documentation being added here.
See the 'Tools that do an automatic fetch defeat "git push
--force-with-lease"' (<1491617750.2149.10.camel@mattmccutchen.net>)
git mailing list thread for more details. Jakub Narębski suggested
this method of adding another remote to bypass this edge case,
document that & add a test for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Config file reading order is important because each file can override
values in the previous files and this is expected behavior. Normally
we read in this order, all in do_git_config_sequence():
1. $HOME/.gitconfig
2. $GIT_DIR/config
3. config from command line
However in read_early_config() the order may be swapped a bit if
setup_git_directory() has not been called:
1. $HOME/.gitconfig
2. $GIT_DIR/config is NOT read because .git dir is not found _yet_
3. config from command line
4. $GIT_DIR/config is now READ (after discover_git_directory() call)
The reading at step 4 could override config at step 3, which is not
the expectation.
Now that we could pass the .git dir around, we could feed
discover_git_directory() back to step 2, so that it works again, and
remove step 4.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it easy to sign off a whole patchset before submission.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It looks like in 89c3b0ad43 (name-hash: add perf test for lazy_init_name_hash,
2017-03-23) p0004 was not created with the execute unix rights.
Let's fix that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't assume that the current working directory is the root of the
repository. Correctly generate the path for the recursing child
processes by building it from the work_tree() root instead. Otherwise if
we run ls-files using --git-dir or --work-tree it will not work
correctly as it attempts to change directory into a potentially invalid
location. Best case, it doesn't exist and we produce an error. Worst
case we cd into the wrong location and unknown behavior occurs.
Add a new test which highlights this possibility.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If setup_git_directory() and friends have not been called,
get_git_dir() (because of includeIf.gitdir:XXX) would lead to
die("BUG: setup_git_env called without repository");
There are two cases when a config file could be read before $GIT_DIR
is located.
The first one is check_repository_format(), where we read just the one
file $GIT_DIR/config to check if we could understand this
repository. This case should be safe. We do not parse include
directives, which can only be triggered from git_config_with_options,
but setup code uses a lower-level function. The concerned variables
should never be hidden away behind includes anyway.
The second one is triggered in check_pager_config() when we're about
to run an external git command. We might be able to find $GIT_DIR in
this case, which is exactly what read_early_config() does (and also is
what check_pager_config() uses). Conditional includes and
get_git_dir() could be triggered by the first
git_config_with_options() call there, before discover_git_directory()
is used as a fallback $GIT_DIR detection.
Detect this special "early reading" case, pass down the $GIT_DIR,
either from previous setup or detected by discover_git_directory(),
and make conditional include use it.
Noticed-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit e77aa336f116 ("ls-files: optionally recurse into
submodules", 2016-10-07) ls-files has known how to recurse into
submodules when displaying files.
Unfortunately this fails for certain cases, including when nesting more
than one submodule, called from within a submodule that itself has
submodules, or when the GIT_DIR environemnt variable is set.
Prior to commit b58a68c1c187 ("setup: allow for prefix to be passed to
git commands", 2017-03-17) this resulted in an error indicating that
--prefix and --super-prefix were incompatible.
After this commit, instead, the process loops forever with a GIT_DIR set
to the parent and continuously reads the parent submodule files and
recursing forever.
Fix this by preparing the environment properly for submodules when
setting up the child process. This is similar to how other commands such
as grep behave.
This was not caught by the original tests because the scenario is
avoided if the submodules are created separately and not stored as the
standard method of putting the submodule git directory under
.git/modules/<name>. We can update the test to show the failure by the
addition of "git submodule absorbgitdirs" to the test case. However,
note that this new test would run forever without the necessary fix in
this patch.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Structure calls as
test_expect_success 'description' '
body
'
Use double quotes for the description if it requires parameter
expansion or contains a single quote.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* js/difftool-builtin:
difftool: fix use-after-free
difftool: avoid strcpy
|
|
"git diff --submodule=diff" learned to work better in a project
with a submodule that in turn has its own submodules.
* sb/show-diff-for-submodule-in-diff-fix:
diff: submodule inline diff to initialize env array.
|
|
Update error handling for codepath that deals with corrupt loose
objects.
* jk/loose-object-info-report-error:
index-pack: detect local corruption in collision check
sha1_loose_object_info: return error for corrupted objects
|
|
git-p4 was using "git name-rev" to find out the current branch.
That is not safe, since if multiple branches or tags point at
the same revision, the result obtained might not be what is
expected.
Instead use "git symbolic-ref".
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Brian Malehorn
Junio C Hamano
Stephen Hicks
Jeff Hostetler
Jeff King
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
Giuseppe Bilotta
Christian Couder
Jacob Keller
Kyle Meyer
Luke Diamand