| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Move the preparatory steps that create the expected output inside
the test bodies, remove unnecessary blank lines before and after the
test bodies, and drop SP between redirection operator and its target.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/add-ignore-errors:
add: ignore only ignored files
|
|
* jk/approxidate-avoid-y-d-m-over-future-dates:
approxidate: allow ISO-like dates far in the future
pass TIME_DATE_NOW to approxidate future-check
|
|
* jk/for-each-reflog-ent-reverse:
for_each_reflog_ent_reverse: turn leftover check into assertion
for_each_reflog_ent_reverse: fix newlines on block boundaries
|
|
* maint-2.1:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-2.0:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-1.9:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* jk/dotgit-case-maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
Our is_hfs_dotgit function relies on the hackily-implemented
next_hfs_char to give us the next character that an HFS+
filename comparison would look at. It's hacky because it
doesn't implement the full case-folding table of HFS+; it
gives us just enough to see if the path matches ".git".
At the end of next_hfs_char, we use tolower() to convert our
32-bit code point to lowercase. Our tolower() implementation
only takes an 8-bit char, though; it throws away the upper
24 bits. This means we can't have any false negatives for
is_hfs_dotgit. We only care about matching 7-bit ASCII
characters in ".git", and we will correctly process 'G' or
'g'.
However, we _can_ have false positives. Because we throw
away the upper bits, code point \u{0147} (for example) will
look like 'G' and get downcased to 'g'. It's not known
whether a sequence of code points whose truncation ends up
as ".git" is meaningful in any language, but it does not
hurt to be more accurate here. We can just pass out the full
32-bit code point, and compare it manually to the upper and
lowercase characters we care about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests that depend on perl lacked PERL prerequisite to protect
them, breaking build with NO_PERL configuration.
* jk/no-perl-tests:
t960[34]: mark cvsimport tests as requiring perl
t0090: mark add-interactive test with PERL prerequisite
|
|
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
|
|
"git init" (hence "git clone") initialized the per-repository
configuration file .git/config with x-bit by mistake.
* mh/config-flip-xbit-back-after-checking:
create_default_files(): don't set u+x bit on $GIT_DIR/config
|
|
"git config --get-color" did not parse its command line arguments
carefully.
* jk/colors-fix:
t4026: test "normal" color
config: fix parsing of "git config --get-color some.key -1"
docs: describe ANSI 256-color mode
|
|
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
|
|
* maint-2.1:
Git 2.1.4
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-2.0:
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.9:
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.8.5:
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* dotgit-case-maint-1.8.5:
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
Now that the index can block pathnames that can be mistaken
to mean ".git" on NTFS and FAT32, it would be helpful for
fsck to notice such problematic paths. This lets servers
which use receive.fsckObjects block them before the damage
spreads.
Note that the fsck check is always on, even for systems
without core.protectNTFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
NTFS.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on NTFS themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git or git~1, meaning mischief is almost
certainly what the tree author had in mind).
Ideally these would be controlled by a separate
"fsck.protectNTFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the index can block pathnames that case-fold to
".git" on HFS+, it would be helpful for fsck to notice such
problematic paths. This lets servers which use
receive.fsckObjects block them before the damage spreads.
Note that the fsck check is always on, even for systems
without core.protectHFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
HFS+.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on HFS+ themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git with invisible Unicode code-points mixed
in, meaning mischief is almost certainly what the tree
author had in mind).
Ideally these would be controlled by a separate
"fsck.protectHFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We complain about ".git" in a tree because it cannot be
loaded into the index or checked out. Since we now also
reject ".GIT" case-insensitively, fsck should notice the
same, so that errors do not propagate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check that fsck notices and complains about confusing
paths in trees. However, there are a few shortcomings:
1. We check only for these paths as file entries, not as
intermediate paths (so ".git" and not ".git/foo").
2. We check "." and ".." together, so it is possible that
we notice only one and not the other.
3. We repeat a lot of boilerplate.
Let's use some loops to be more thorough in our testing, and
still end up with shorter code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not allow ".git" to enter into the index as a path
component, because checking out the result to the working
tree may causes confusion for subsequent git commands.
However, on case-insensitive file systems, ".Git" or ".GIT"
is the same. We should catch and prevent those, too.
Note that technically we could allow this for repos on
case-sensitive filesystems. But there's not much point. It's
unlikely that anybody cares, and it creates a repository
that is unexpectedly non-portable to other systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We should prevent nonsense paths from entering the index in
the first place, as they can cause confusing results if they
are ever checked out into the working tree. We already do
so, but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read a reflog file in reverse, we read whole chunks
of BUFSIZ bytes, then loop over the buffer, parsing any
lines we find. We find the beginning of each line by looking
for the newline from the previous line. If we don't find
one, we know that we are either at the beginning of
the file, or that we have to read another block.
In the latter case, we stuff away what we have into a
strbuf, read another block, and continue our parse. But we
missed one case here. If we did find a newline, and it is at
the beginning of the block, we must also stuff that newline
into the strbuf, as it belongs to the block we are about to
read.
The minimal fix here would be to add this special case to
the conditional that checks whether we found a newline.
But we can make the flow a little clearer by rearranging a
bit: we first handle lines that we are going to show, and
then at the end of each loop, stuff away any leftovers if
necessary. That lets us fold this special-case in with the
more common "we ended in the middle of a line" case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The plan for the push.default transition had all along been
to use the "simple" method rather than "upstream" as a
default if the user did not specify their own push.default
value. Commit 11037ee (push: switch default from "matching"
to "simple", 2013-01-04) tried to implement that by moving
PUSH_DEFAULT_UNSPECIFIED in our switch statement to
fall-through to the PUSH_DEFAULT_SIMPLE case.
When the commit that became 11037ee was originally written,
that would have been enough. We would fall through to
calling setup_push_upstream() with the "simple" parameter
set to 1. However, it was delayed for a while until we were
ready to make the transition in Git 2.0.
And in the meantime, commit ed2b182 (push: change `simple`
to accommodate triangular workflows, 2013-06-19) threw a
monkey wrench into the works. That commit drops the "simple"
parameter to setup_push_upstream, and instead checks whether
the global "push_default" is PUSH_DEFAULT_SIMPLE. This is
right when the user has explicitly configured push.default
to simple, but wrong when we are a fall-through for the
"unspecified" case.
We never noticed because our push.default tests do not cover
the case of the variable being totally unset; they only
check the "simple" behavior itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add foo bar" adds neither foo nor bar when bar is ignored, but dies
to let the user recheck their command invocation. This becomes less
helpful when "git add foo.*" is subject to shell expansion and some of
the expanded files are ignored.
"git add --ignore-errors" is supposed to ignore errors when indexing
some files and adds the others. It does ignore errors from actual
indexing attempts, but does not ignore the error "file is ignored" as
outlined above. This is unexpected.
Change "git add foo bar" to add foo when bar is ignored, but issue
a warning and return a failure code as before the change.
That is, in the case of trying to add ignored files we now act the same
way (with or without "--ignore-errors") in which we act for more
severe indexing errors when "--ignore-errors" is specified.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user specifiers "normal" for a foreground color, this
should be a noop (while this may sound useless, it is the
only way to specify an unchanged foreground color followed
by a specific background color).
We also check that color "-1" does the same thing. This is
not documented, but has worked forever, so let's make sure
we keep supporting it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tb/no-relative-file-url:
t5705: the file:// URL should be absolute
|
|
Fix-up to a new feature in 'master'.
* da/difftool:
difftool: honor --trust-exit-code for builtin tools
|
|
Git-cvsimport is written in perl, which understandably
causes the tests to fail if you build with NO_PERL (which
will avoid building cvsimport at all). The earlier cvsimport
tests in t9600-t9602 are all marked with a PERL
prerequisite, but these ones are not.
The one in t9603 was likely not noticed because it is an
expected failure anyway.
The ones in t9604 have been around for a long time, but it
is likely that the combination of NO_PERL and having cvsps
installed is rare enough that nobody noticed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add-interactive system is built in perl. If you build
with NO_PERL, running "git commit --interactive" will exit
with an error and the test will fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
run_merge_tool() was not setting $status, which prevented the
exit code for builtin tools from being forwarded to the caller.
Capture the exit status and add a test to guarantee the behavior.
Reported-by: Adria Farres <14farresa@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are parsing approxidate strings and we find three
numbers separate by one of ":/-.", we guess that it may be a
date. We feed the numbers to match_multi_number, which
checks whether it makes sense as a date in various orderings
(e.g., dd/mm/yy or mm/dd/yy, etc).
One of the checks we do is to see whether it is a date more
than 10 days in the future. This was added in 38035cf (date
parsing: be friendlier to our European friends.,
2006-04-05), and lets us guess that if it is currently April
2014, then "10/03/2014" is probably March 10th, not October
3rd.
This has a downside, though; if you want to be overly
generous with your "--until" date specification, we may
wrongly parse "2014-12-01" as "2014-01-12" (because the
latter is an in-the-past date). If the year is a future year
(i.e., both are future dates), it gets even weirder. Due to
the vagaries of approxidate, months _after_ the current date
(no matter the year) get flipped, but ones before do not.
This patch drops the "in the future" check for dates of this
form, letting us treat them always as yyyy-mm-dd, even if
they are in the future. This does not affect the normal
dd/mm/yyyy versus mm/dd/yyyy lookup, because this code path
only kicks in when the first number is greater than 70
(i.e., it must be a year, and cannot be either a date or a
month).
The one possible casualty is that "yyyy-dd-mm" is less
likely to be chosen over "yyyy-mm-dd". That's probably OK,
though because:
1. The difference happens only when the date is in the
future. Already we prefer yyyy-mm-dd for dates in the
past.
2. It's unclear whether anybody even uses yyyy-dd-mm
regularly. It does not appear in lists of common date
formats in Wikipedia[1,2].
3. Even if (2) is wrong, it is better to prefer ISO-like
dates, as that is consistent with what we use elsewhere
in git.
[1] http://en.wikipedia.org/wiki/Date_and_time_representation_by_country
[2] http://en.wikipedia.org/wiki/Calendar_date
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we "git checkout $tree", we pull paths from $tree into
the index, and then check the resulting entries out to the
worktree. Our method for the first step is rather
heavy-handed, though; it clobbers the entire existing index
entry, even if the content is the same. This means we lose
our stat information, leading checkout_entry to later
rewrite the entire file with identical content.
Instead, let's see if we have the identical entry already in
the index, in which case we leave it in place. That lets
checkout_entry do the right thing. Our tests cover two
interesting cases:
1. We make sure that a file which has no changes is not
rewritten.
2. We make sure that we do update a file that is unchanged
in the index (versus $tree), but has working tree
changes. We keep the old index entry, and
checkout_entry is able to realize that our stat
information is out of date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test misused a URL "file://." to mean "relative to here",
which we no longer accept.
In a file:// URL, typically there is no host, and RFC1738 says that
file:///<path> should be used.
Update t5705 to use a working URL.
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix-up a test for portability.
* jk/fetch-reflog-df-conflict:
t1410: fix breakage on case-insensitive filesystems
|
|
Two tests recently added to t1410 create branches "a" and
"a/b" to test d/f conflicts on reflogs. Earlier, unrelated
tests in that script create the path "A/B" in the working
tree. There's no conflict on a case-sensitive filesystem,
but on a case-insensitive one, "git log" will complain that
"a/b" is both a revision and a working tree path.
We could fix this by using a "--" to disambiguate, but we
are probably better off using names that are less confusing
to make it more clear that they are unrelated to the working
tree files. This patch turns "a/b" into "one/two".
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --first-parent -L..." used to crash.
* tm/line-log-first-parent:
line-log: fix crash when --first-parent is used
|
|
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
|
|
line-log tries to access all parents of a commit, but only the first
parent has been loaded if "--first-parent" is specified, resulting
in a crash.
Limit the number of parents to one if "--first-parent" is specified.
Reported-by: Eric N. Vander Weele <ericvw@gmail.com>
Signed-off-by: Tzvetan Mikov <tmikov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we update a ref, we have two rules for whether or not
we actually update the reflog:
1. If the reflog already exists, we will always append to
it.
2. If log_all_ref_updates is set, we will create a new
reflog file if necessary.
We do the existence check by trying to open the reflog file,
either with or without O_CREAT (depending on log_all_ref_updates).
If it fails, then we check errno to see what happened.
If we were not using O_CREAT and we got ENOENT, the file
doesn't exist, and we return success (there isn't a reflog
already, and we were not told to make a new one).
If we get EISDIR, then there is likely a stale directory
that needs to be removed (e.g., there used to be "foo/bar",
it was deleted, and the directory "foo" was left. Now we
want to create the ref "foo"). If O_CREAT is set, then we
catch this case, try to remove the directory, and retry our
open. So far so good.
But if we get EISDIR and O_CREAT is not set, then we treat
this as any other error, which is not right. Like ENOENT,
EISDIR is an indication that we do not have a reflog, and we
should silently return success (we were not told to create
it). Instead, the current code reports this as an error, and
we fail to update the ref at all.
Note that this is relatively unlikely to happen, as you
would have to have had reflogs turned on, and then later
turned them off (it could also happen due to a bug in fetch,
but that was fixed in the previous commit). However, it's
quite easy to fix: we just need to treat EISDIR like ENOENT
for the non-O_CREAT case, and silently return (note that
this early return means we can also simplify the O_CREAT
case).
Our new tests cover both cases (O_CREAT and non-O_CREAT).
The first one already worked, of course.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we start the git-fetch program, we call git_config to
load all config, but our callback only processes the
fetch.prune option; we do not chain to git_default_config at
all.
This means that we may not load some core configuration
which will have an effect. For instance, we do not load
core.logAllRefUpdates, which impacts whether or not we
create reflogs in a bare repository.
Note that I said "may" above. It gets even more exciting. If
we have to transfer actual objects as part of the fetch,
then we call fetch_pack as part of the same process. That
function loads its own config, which does chain to
git_default_config, impacting global variables which are
used by the rest of fetch. But if the fetch is a pure ref
update (e.g., a new ref which is a copy of an old one), we
skip fetch_pack entirely. So we get inconsistent results
depending on whether or not we have actual objects to
transfer or not!
Let's just load the core config at the start of fetch, so we
know we have it (we may also load it again as part of
fetch_pack, but that's OK; it's designed to be idempotent).
Our tests check both cases (with and without a pack). We
also check similar behavior for push for good measure, but
it already works as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
|
|
* jk/pack-objects-no-bitmap-when-splitting:
pack-objects: turn off bitmaps when we split packs
|
Junio C Hamano
Jeff King
Johannes Schindelin
Michael J Gruber
Michael Haggerty
David Aguilar
Torsten Bögershausen
Tzvetan Mikov