| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Test & perf scripts must use unique numeric prefix, but a pair
shared the same number, which is fixed here.
* jk/perf-no-dups:
t/perf: rename duplicate-numbered test script
|
|
The first line of verbose output from each test piece now carries
the test name and number to help scanning with eyeballs.
* sg/show-failed-test-names:
tests: show the test name and number at the start of verbose output
t0000-basic: use realistic test script names in the verbose tests
|
|
The code to write commit-graph over given commit object names has
been made a bit more robust.
* sg/commit-graph-validate:
commit-graph: error out on invalid commit oids in 'write --stdin-commits'
commit-graph: turn a group of write-related macro flags into an enum
t5318-commit-graph: use 'test_expect_code'
|
|
"git checkout" and "git restore" to re-populate the index from a
tree-ish (typically HEAD) did not work correctly for a path that
was removed and then added again with the intent-to-add bit, when
the corresponding working tree file was empty. This has been
corrected.
* vn/restore-empty-ita-corner-case-fix:
restore: add test for deleted ita files
checkout.c: unstage empty deleted ita files
|
|
Test fix.
* sg/do-not-skip-non-httpd-tests:
t: warn against adding non-httpd-specific tests after sourcing 'lib-httpd'
t5703: run all non-httpd-specific tests before sourcing 'lib-httpd.sh'
t5510-fetch: run non-httpd-specific test before sourcing 'lib-httpd.sh'
|
|
Test fix.
* sg/t5510-test-i18ngrep-fix:
t5510-fetch: fix negated 'test_i18ngrep' invocation
|
|
"git grep --recurse-submodules" that looks at the working tree
files looked at the contents in the index in submodules, instead of
files in the working tree.
* mt/grep-submodules-working-tree:
grep: fix worktree case in submodules
|
|
There are two perf scripts numbered p5600, but with otherwise different
names ("clone-reference" versus "partial-clone"). We store timing
results in files named after the whole script, so internally we don't
get confused between the two. But "aggregate.perl" just prints the test
number for each result, giving multiple entries for "5600.3". It also
makes it impossible to skip one test but not the other with
GIT_SKIP_TESTS.
Let's renumber the one that appeared later (by date -- the source of the
problem is that the two were developed on independent branches). For the
non-perf test suite, our test-lint rule would have complained about this
when the two were merged, but t/perf never learned that trick.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* bc/hash-independent-tests-part-4:
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
|
|
Leakfix.
* mt/dir-iterator-updates:
test-dir-iterator: use path argument directly
dir-iterator: release strbuf after use
|
|
"merge-recursive" hit a BUG() when building a virtual merge base
detected a directory rename.
* en/disable-dir-rename-in-recursive-merge:
merge-recursive: avoid directory rename detection in recursive case
|
|
Commit 01d3a526ad (t0000: check whether the shell supports the "local"
keyword, 2017-10-26) added a test to gather data on whether people run
the test suite with shells that don't support "local".
After almost two years, nobody has complained, and several other uses
have cropped up in test-lib-functions.sh. Let's declare it acceptable to
use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t1410.3 ("corrupt and checks") fails when run using dash versions
before 0.5.8, with a cryptic message:
mv: cannot stat '.git/objects//e84adb2704cbd49549e52169b4043871e13432': No such file or directory
The function generating that path:
test_oid_to_path () {
echo "${1%${1#??}}/${1#??}"
}
which is supposed to produce a result like
12/3456789....
But a dash bug[*] causes it to instead expand to
/3456789...
The stream of symbols that makes up this function is hard for humans
to follow, too. The complexity mostly comes from the repeated use of
the expression ${1#??} for the basename of the loose object. Use a
variable instead --- nowadays, the dialect of shell used by Git
permits local variables, so this is cheap.
An alternative way to work around [*] is to remove the double-quotes
around test_oid_to_path's return value. That makes the expression
easier for dash to read, but harder for humans. Let's prefer the
rephrasing that's helpful for humans, too.
Noticed by building on Ubuntu trusty, which uses dash 0.5.7.
[*] Fixed by v0.5.8~13 ("[EXPAND] Propagate EXP_QPAT in subevalvar, 2013-08-23).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid allocating and leaking a strbuf for holding a verbatim copy of the
path argument and pass the latter directly to dir_iterator_begin()
instead.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since commit 8c8e5bd6eb33 ("merge-recursive: switch directory
rename detection default", 2019-04-05), the default handling with
directory rename detection was to report a conflict and leave unstaged
entries in the index. However, when creating a virtual merge base in
the recursive case, we absolutely need a tree, and the only way a tree
can be written is if we have no unstaged entries -- otherwise we hit a
BUG().
There are a few fixes possible here which at least fix the BUG(), but
none of them seem optimal for other reasons; see the comments with the
new testcase 13e in t6043 for details (which testcase triggered a BUG()
prior to this patch). As such, just opt for a very conservative and
simple choice that is still relatively reasonable: have the recursive
case treat 'conflict' as 'false' for opt->detect_directory_renames.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The verbose output of every test looks something like this:
expecting success:
echo content >file &&
git add file &&
git commit -m "add file"
[master (root-commit) d1fbfbd] add file
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 file
ok 1 - commit works
i.e. first an "expecting success" (or "checking known breakage") line
followed by the commands to be executed, then the output of those
comamnds, and finally an "ok"/"not ok" line containing the test name.
Note that the test's name is only shown at the very end.
With '-x' tracing enabled and/or in longer tests the verbose output
might be several screenfulls long, making it harder than necessary to
find where the output of the test with a given name starts (especially
when the outputs to different file descriptors are racing, and the
"expecting success"/command block arrives earlier than the "ok" line
of the previous test).
Print the test name at the start of the test's verbose output, i.e. at
the end of the "expecting success" and "checking known breakage"
lines, to make the start of a particular test a bit easier to
recognize. Also print the test script and test case numbers, to help
those poor souls who regularly have to scan through the combined
verbose output of several test scripts.
So the dummy test above would start like this:
expecting success of 9999.1 'commit works':
echo content >file &&
[...]
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our test scripts are named something like 't1234-command.sh', but the
script names used in 't0000-basic.sh' don't follow this naming
convention. Normally this doesn't matter, because the test scripts
themselves don't care how they are called. However, the next patch
will start to include the test number in the test's verbose output, so
the test script's name will matter in the two tests checking the
verbose output.
Update the tests 'test --verbose' and 'test --verbose-only' to follow
out test script naming convention.
Leave the other tests in 't0000' unchanged: changing the names of
their test scripts would be only pointless code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18),
the method sort_and_scan_merged_commits() was added to merge the
commit lists of two commit-graph files in the incremental format.
Unfortunately, there was an off-by-one error in that method around
incrementing num_extra_edges, which leads to an incorrect offset
for the base graph chunk.
When we store an octopus merge in the commit-graph file, we store
the first parent in the normal place, but use the second parent
position to point into the "extra edges" chunk where the remaining
parents exist. This means we should be adding "num_parents - 1"
edges to this list, not "num_parents - 2". That is the basic error.
The reason this was not caught in the test suite is more subtle.
In 5324-split-commit-graph.sh, we test creating an octopus merge
and adding it to the tip of a commit-graph chain, then verify the
result. This _should_ have caught the problem, except that when
we load the commit-graph files we were overly careful to not fail
when the commit-graph chain does not match. This care was on
purpose to avoid race conditions as one process reads the chain
and another process modifies it. In such a case, the reading
process outputs the following message to stderr:
warning: commit-graph chain does not match
These warnings are output in the test suite, but ignored. By
checking the stderr of `git commit-graph verify` to include
the expected progress output, it will now catch this error.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While 'git commit-graph write --stdin-commits' expects commit object
ids as input, it accepts and silently skips over any invalid commit
object ids, and still exits with success:
# nonsense
$ echo not-a-commit-oid | git commit-graph write --stdin-commits
$ echo $?
0
# sometimes I forgot that refs are not good...
$ echo HEAD | git commit-graph write --stdin-commits
$ echo $?
0
# valid tree OID, but not a commit OID
$ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits
$ echo $?
0
$ ls -l .git/objects/info/commit-graph
ls: cannot access '.git/objects/info/commit-graph': No such file or directory
Check that all input records are indeed valid commit object ids and
return with error otherwise, the same way '--stdin-packs' handles
invalid input; see e103f7276f (commit-graph: return with errors during
write, 2019-06-12).
Note that it should only return with error when encountering an
invalid commit object id coming from standard input. However,
'--reachable' uses the same code path to process object ids pointed to
by all refs, and that includes tag object ids as well, which should
still be skipped over. Therefore add a new flag to 'enum
commit_graph_write_flags' and a corresponding field to 'struct
write_commit_graph_context', so we can differentiate between those two
cases.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 't5318-commit-graph.sh' the test 'close with correct error on bad
input' manually verifies the exit code of a 'git commit-graph write'
command.
Use 'test_expect_code' instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for making "git log" use the mailmap by default.
* jc/log-mailmap-flip-defaults:
log: really flip the --mailmap default
log: flip the --mailmap default unconditionally
|
|
The recently added [includeif "onbranch:branch"] feature does not
work well with an early config mechanism, as it attempts to find
out what branch we are on before we even haven't located the git
repository. The inclusion during early config scan is ignored to
work around this issue.
* js/early-config-with-onbranch:
config: work around bug with includeif:onbranch and early config
|
|
`git restore --staged` uses the same machinery as `git checkout HEAD`,
so there should be a similar test case for "restore" as the existing
test case for "checkout" with deleted ita files.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Varun Naik <vcnaik94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is possible to delete a committed file from the index and then add it
as intent-to-add. After `git checkout HEAD <pathspec>`, the file should
be identical in the index and HEAD. The command already works correctly
if the file has contents in HEAD. This patch provides the desired
behavior even when the file is empty in HEAD.
`git checkout HEAD <pathspec>` calls tree.c:read_tree_1(), with fn
pointing to checkout.c:update_some(). update_some() creates a new cache
entry but discards it when its mode and oid match those of the old
entry. A cache entry for an ita file and a cache entry for an empty file
have the same oid. Therefore, an empty deleted ita file previously
passed both of these checks, and the new entry was discarded, so the
file remained unchanged in the index. After this fix, if the file is
marked as ita in the cache, then we avoid discarding the new entry and
add the new entry to the cache instead.
This change should not affect newly added ita files. For those, inside
tree.c:read_tree_1(), tree_entry_interesting() returns
entry_not_interesting, so fn is never called.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Varun Naik <vcnaik94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a couple of test scripts that are not completely
httpd-specific, but do run a few httpd-specific tests at the end.
These test scripts source 'lib-httpd.sh' somewhere mid-script, which
then skips all the rest of the test script if the dependencies for
running httpd tests are not fulfilled.
As the previous two patches in this series show, already on two
occasions non-httpd-specific tests were appended at the end of such
test scripts, and, consequently, they were skipped as well when httpd
tests couldn't be run.
Add a comment at the end of these test scripts to warn against adding
non-httpd-specific tests at the end, in the hope that they will help
prevent similar issues in the future.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
't5703-upload-pack-ref-in-want.sh' sources 'lib-httpd.sh' near the end
to run a couple of httpd-specific tests, but 'lib-httpd.sh' skips all
the rest of the test script if the dependencies for running httpd
tests are not fulfilled. However, the last six tests in 't5703' are
not httpd-specific, but they are skipped as well when httpd tests
can't be run.
Move these six tests earlier in the test script, before 'lib-httpd.sh'
is sourced, so they will be run even when httpd tests aren't. Note
that this is not merely a pure code movement, because the setup test
case for the httpd tests needed an additional 'rm -rf
"$LOCAL_PRISTINE"' to clean up a directory left behind by the moved
non-httpd-specific tests.
Also add a comment at the end of this test script to warn against
adding non-httpd-specific tests at the end, in the hope that it will
help prevent similar issues in the future.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
't5510-fetch.sh' sources 'lib-httpd.sh' near the end to run a
httpd-specific test, but 'lib-httpd.sh' skips all the rest of the test
script if the dependencies for running httpd tests are not fulfilled.
Alas, recently cdbd70c437 (fetch: add --[no-]show-forced-updates
argument, 2019-06-18) appended a non-httpd-specific test at the end,
and this test is then skipped as well when httpd tests can't be run.
Move this new test earlier in the test script, before 'lib-httpd.sh'
is sourced, so it will be run even when httpd tests aren't.
Also add a comment at the end of this test script to warn against
adding non-httpd-specific tests at the end, in the hope that it will
help prevent similar issues in the future.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Squelch unneeded and misleading warnings from "repack" when the
command attempts to generate pack bitmaps without explicitly asked
for by the user.
* jk/repack-silence-auto-bitmap-warning:
repack: simplify handling of auto-bitmaps and .keep files
repack: silence warnings when auto-enabled bitmaps cannot be built
t7700: clean up .keep file in bitmap-writing test
|
|
* jk/sort-iter-test-output:
t: sort output of hashmap iteration
|
|
* jc/dir-iterator-test-fix:
test-dir-iterator: do not assume errno values
|
|
Update to the tests to help SHA-256 transition continues.
* bc/hash-independent-tests-part-4:
t2203: avoid hard-coded object ID values
t1710: make hash independent
t1007: remove SHA1 prerequisites
t0090: make test pass with SHA-256
t0027: make hash size independent
t6030: make test work with SHA-256
t5000: make hash independent
t1450: make hash size independent
t1410: make hash size independent
t: add helper to convert object IDs to paths
|
|
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 07b2c0eacac (config: learn the "onbranch:" includeIf condition,
2019-06-05), there is a potential catch-22 in the early config path: if
the `include.onbranch:` feature is used, Git assumes that the Git
directory has been initialized already. However, in the early config
code path that is not true.
One way to trigger this is to call the following commands in any
repository:
git config includeif.onbranch:refs/heads/master.path broken
git help -a
The symptom triggered by the `git help -a` invocation reads like this:
BUG: refs.c:1851: attempting to get main_ref_store outside of repository
Let's work around this, simply by ignoring the `includeif.onbranch:`
setting when parsing the config when the ref store has not been
initialized (yet).
Technically, there is a way to solve this properly: teach the refs
machinery to initialize the ref_store from a given gitdir/commondir pair
(which we _do_ have in the early config code path), and then use that in
`include_by_branch()`. This, however, is a pretty involved project, and
we're already in the feature freeze for Git v2.23.0.
Note: when calling above-mentioned two commands _outside_ of any Git
worktree (passing the `--global` flag to `git config`, as there is
obviously no repository config available), at the point when
`include_by_branch()` is called, `the_repository` is `NULL`, therefore
we have to be extra careful not to dereference it in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7328482253 (repack: disable bitmaps-by-default if .keep files
exist, 2019-06-29) taught repack to prefer disabling bitmaps to
duplicating objects (unless bitmaps were asked for explicitly).
But there's an easier way to do this: if we keep passing the
--honor-pack-keep flag to pack-objects when auto-enabling bitmaps, then
pack-objects already makes the same decision (it will disable bitmaps
rather than duplicate). Better still, pack-objects can actually decide
to do so based not just on the presence of a .keep file, but on whether
that .keep file actually impacts the new pack we're making (so if we're
racing with a push or fetch, for example, their temporary .keep file
will not block us from generating bitmaps if they haven't yet updated
their refs).
And because repack uses the --write-bitmap-index-quiet flag, we don't
have to worry about pack-objects generating confusing warnings when it
does see a .keep file. We can confirm this by tweaking the .keep test to
check repack's stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on various config options, a full repack may not be able to
build a reachability bitmap index (e.g., if pack.packSizeLimit forces us
to write multiple packs). In these cases pack-objects may write a
warning to stderr.
Since 36eba0323d (repack: enable bitmaps by default on bare repos,
2019-03-14), we may generate these warnings even when the user did not
explicitly ask for bitmaps. This has two downsides:
- it can be confusing, if they don't know what bitmaps are
- a daemonized auto-gc will write this to its log file, and the
presence of the warning may suppress further auto-gc (until
gc.logExpiry has elapsed)
Let's have repack communicate to pack-objects that the choice to turn on
bitmaps was not made explicitly by the user, which in turn allows
pack-objects to suppress these warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After our test snippet finishes, the .keep file is left in place, making
it hard to do further tests of the auto-bitmap-writing code (since it
suppresses the feature completely). Let's clean it up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test '--no-show-forced-updates' in 't5510-fetch.sh' added in
cdbd70c437 (fetch: add --[no-]show-forced-updates argument,
2019-06-18) runs '! test_i18ngrep ...'. This is wrong, because when
running the test with GIT_TEST_GETTEXT_POISON=true, then
'test_i18ngrep' is basically a noop and always returns with success,
the leading ! turns that into a failure, which then fails the test.
Use 'test_i18ngrep ! ...' instead.
This went unnoticed by our GETTEXT_POISON CI builds, because those
builds don't run this test case: in those builds we don't install
Apache, and this test comes after 't5510' sources 'lib-httpd.sh',
which, consequently, skips all the remaining tests, including this
one.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The iteration order of a hashmap is undefined, and may depend on things
like the exact set of items added, or the table has been grown or
shrunk. In the case of an oidmap, it even depends on endianness, because
we take the oid hash by casting sha1 bytes directly into an unsigned
int.
Let's sort the test-tool output from any hash iterators. In the case of
t0011, this is just future-proofing. But for t0016, it actually fixes a
reported failure on the big-endian s390 and nonstop ports.
I didn't bother to teach the helper functions to optionally sort output.
They are short enough that it's simpler to just repeat them inline for
the iteration tests than it is to add a --sort option.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running git-grep with --recurse-submodules results in a cached grep for
the submodules even when --cached is not used. This makes all
modifications in submodules' tracked files be always ignored when
grepping. Solve that making git-grep respect the cached option when
invoking grep_cache() inside grep_submodule(). Also, add tests to
ensure that the desired behavior is performed.
Reported-by: Daniel Zaoui <jackdanielz@eyomi.org>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few tests printed 'errno' as an integer and compared with
hardcoded integers; this is obviously not portable.
A two things to note are:
- the string obtained by strerror() is not portable, and cannot be
used for the purpose of these tests.
- there unfortunately isn't a portable way to map error numbers to
error names.
As we only care about a few selected errors, just map the error
number to the name before emitting for comparison.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
|
|
Code restructuring during 2.20 period broke fetching tags via
"import" based transports.
* fc/fetch-with-import-fix:
fetch: fix regression with transport helpers
fetch: make the code more understandable
fetch: trivial cleanup
t5801 (remote-helpers): add test to fetch tags
t5801 (remote-helpers): cleanup refspec stuff
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
|
|
"git checkout -p" needs to selectively apply a patch in reverse,
which did not work well.
* pw/add-p-recount:
add -p: fix checkout -p with pathological context
|
|
"git interpret-trailers" always treated '#' as the comment
character, regardless of core.commentChar setting, which has been
corrected.
* jk/trailers-use-config:
interpret-trailers: load default config
|
|
"git stash show 23" used to work, but no more after getting
rewritten in C; this regression has been corrected.
* tg/stash-ref-by-index-fix:
stash: fix show referencing stash index
|
|
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
|
|
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
|
|
"git submodule foreach" did not protect command line options passed
to the command to be run in each submodule correctly, when the
"--recursive" option was in use.
* ms/submodule-foreach-fix:
submodule foreach: fix recursion of options
|
Junio C Hamano
Jeff King
Jonathan Nieder
René Scharfe
Elijah Newren
SZEDER Gábor
Derrick Stolee
Varun Naik
Johannes Schindelin
Matheus Tavares