| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a tag points at a bad or nonexistent object, we should diagnose the
breakage and exit. An earlier commit 4f3dcc2 (Fix 'git show' on signed
tag of signed tag of commit, 2008-07-01) lost this check and made it
segfault instead; not good.
This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
find_parent_branch generates branch@rev type branches when one has to
look back through SVN history to properly get the history for a branch
copied from somewhere not already being tracked by git-svn. If in the
process of fetching this history, git-svn is interrupted, then when one
fetches again, it will use whatever was last fetched as the parent
commit and fail to fetch any more history which it didn't get to before
being terminated. This is especially troubling in that different
git-svn copies of the same SVN repository can end up with different
commit sha1s, incorrectly showing the history as divergent and
precluding easy collaboration using git push and fetch.
To fix this, when we initialise the Git::SVN object $gs to search for
and perhaps fetch history, we check if there are any commits in SVN in
the range between the current revision $gs is at, and the top revision
for which we were asked to fill history. If there are commits we're
missing in that range, we continue the fetch from the current revision
to the top, properly getting all history before using it as the parent
for the branch we're trying to create.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the message of commit 0fe7c1de16f71312e6adac4b85bddf0d62a47168,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* jk/maint-commit-v-strip:
commit: Fix stripping of patch in verbose mode.
|
|
* bc/maint-keep-pack:
repack: only unpack-unreachable if we are deleting redundant packs
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
|
|
* st/maint-tag:
tag: Add more tests about mixing incompatible modes and options
tag: Check that options are only allowed in the appropriate mode
|
|
* mk/maint-cg-push:
git push: Interpret $GIT_DIR/branches in a Cogito compatible way
|
|
* mv/fast-export:
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
|
|
The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list extra_refs contains tags and the objects referenced by them,
so that they can be handled at the end. When a tag references a
commit, that commit is added to the list using the same name.
Also, the function handle_tags_and_duplicates() relies on the order
the items were added to extra_refs, so clearly we do not want to
use a sorted list here.
Noticed by Miklos Vajna.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The -A option calls pack-objects with the --unpack-unreachable option so
that the unreachable objects in local packs are left in the local object
store loose. But if the -d option to repack was _not_ used, then these
unpacked loose objects are redundant and unnecessary.
Update tests in t7701.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, when 'repack -a' was called and there were no packs in the local
repository without a .keep file, the repack would fall back to calling
pack-objects with '--unpacked --incremental'. This resulted in the created
pack file, if any, to be missing the packed objects in the alternate object
store. Test that this specific case has been fixed.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the limit was sufficiently low, having a single object written
could bust the limit (by design), but caused the remaining allowed
size to go negative for subsequent objects, which for an unsigned
variable is a rather huge limit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "-v" option is given, we put diff of what is to be committed into
the commit template, and then strip it back out again after the user has
edited it.
We used to look for the diff by searching for the "diff --git a/"
header. With diff.mnemonicprefix set in the configuration, however, this
pattern does not match. The pattern is loosened to cover this case.
Also, if the user puts their own diff in the message (e.g., as a sample
output), then we will accidentally trigger the pattern, removing part of
their output.
We can avoid doing this stripping altogether if the user didn't use "-v"
in the first place, so we know that any match we find will be a false
positive.
[jc: this fix was split out of a series originally meant for master.]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this patch, --local means pack only local objects that are not already
packed.
Additionally, this fixes t7700 testing whether loose objects in an alternate
object database are repacked.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Loose objects residing in an alternate object database should not be packed
when the -l option to repack is used.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user created a .keep file for a local pack, then it can be inferred
that the user does not want those objects repacked.
This fixes the repack bug tested by t7700.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Objects residing in pack files that have an associated .keep file are not
supposed to be repacked into new pack files, but they are.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Current git versions ignore everything after # (called <head> in the
following) when pushing. Older versions (before cf818348f1ab57),
interpret #<head> as part of the URL, which make git bail out.
As branches origin from Cogito, it is the best to correct this by using
the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using alternates, it is possible for HEAD to end up pointing to
an invalid commit. git checkout should be able to recover from that
situation without crashing.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/maint-update-ref-fix:
push: fix local refs update if already up-to-date
do not force write of packed refs
|
|
* mv/maint-branch-m-symref:
update-ref --no-deref -d: handle the case when the pointed ref is packed
git branch -m: forbid renaming of a symref
Fix git update-ref --no-deref -d.
rename_ref(): handle the case when the reflog of a ref does not exist
Fix git branch -m for symrefs.
|
|
git push normally updates local refs only after a successful push. If the
remote already has the updates -- pushed indirectly through another repository,
for example -- we forget to update local tracking refs.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We force writing a ref if it does not exist. Originally, we only had to look
for the ref file to check if it existed. Now we have to look for a packed ref
as well. Luckily, resolve_ref already does all the work for us.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-fetch-update-head:
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Fix fetch/pull when run without --update-head-ok
|
|
* jk/maint-ls-files-other:
refactor handling of "other" files in ls-files and status
|
|
* jc/maint-reset-remove-unmerged-new:
reset --hard/read-tree --reset -u: remove unmerged new paths
|
|
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
|
|
In this case we did nothing in the past, but we should delete the
reference in fact.
The problem was that when the symref is not packed but the referenced
ref is packed, then we assumed that the symref is packed as well, but
symrefs are never packed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test was broken on admittedly broken combination of Windows, Cygwin,
and ActiveState Perl.
Signed-off-by: Alex Riesen <ariesen@harmanbecker.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There may be cases where one would really want to rename the symbolic
ref without changing its value, but "git branch -m" is not such a
use-case.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This moves the call to git_config to a place where it doesn't break the
logic for using git archive in a bare repository but retains the fix to
make git archive respect core.autocrlf.
Tests are by René Scharfe.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Tested-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Till now --no-deref was just ignored when deleting refs, fix this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before commit d0b92a3f6e it was possible to run 'git index-pack'
directly in the .git/objects/pack/ directory. Restore that ability.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
06cbe855 (Make core.sharedRepository more generic, 2008-04-16) made
several testcases in t1301-shared-repo.sh which fail if on a system
which creates files with extended attributes (e.g. SELinux), since ls
appends a '+' sign to the permission set in such cases. In fact,
POSIX.1 allows ls to add a single printable character after the usual
3x3 permission bits to show that an optional alternate/additional access
method is associated with the path.
This fixes the testcase to strip any such sign prior to verifying the
permission set.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Deskin Miller <deskinm@umich.edu>
|
|
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When aborting a failed merge that has brought in a new path using "git
reset --hard" or "git read-tree --reset -u", we used to first forget about
the new path (via read_cache_unmerged) and then matched the working tree
to what is recorded in the index, thus ending up leaving the new path in
the work tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/maint-checkout-b:
Check early that a new branch is new and valid
|
|
The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "git status" display code was originally converted
to C, we copied the code from ls-files to discover whether a
pathname returned by read_directory was an "other", or
untracked, file.
Much later, 5698454e updated the code in ls-files to handle
some new cases caused by gitlinks. This left the code in
wt-status.c broken: it would display submodule directories
as untracked directories. Nobody noticed until now, however,
because unless status.showUntrackedFiles was set to "all",
submodule directories were not actually reported by
read_directory. So the bug was only triggered in the
presence of a submodule _and_ this config option.
This patch pulls the ls-files code into a new function,
cache_name_is_other, and uses it in both places. This should
leave the ls-files functionality the same and fix the bug
in status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some misguided documents floating on the Net suggest this sequence:
mkdir newdir && cd newdir
git init
git remote add origin $url
git pull origin master:master
"git pull" has known about misguided "pull" that lets the underlying fetch
update the current branch for a long time. It also has known about
"git pull origin master" into a branch yet to be born.
These two workarounds however were not aware of the existence of each
other and did not work well together. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Since the newline is not removed from lines before pattern matching, a
pattern cannot match to the end of the line using the '$' operator without
using an additional operator which will indirectly match the '\n' character.
Introduce a test which should pass, but which does not due to this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test used the non-zero exit status of 'git diff' to indicate that a
negated funcname pattern, when placed last, was correctly rejected.
The problem with this is that 'git diff' always returns non-zero if it
finds differences in the files it is comparing, and the files must
contain differences in order to trigger the funcname pattern codepath.
Instead of checking for non-zero exit status, make sure the expected
error message is printed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Deskin Miller
Matt McCutchen
Johannes Schindelin
Miklos Vajna
Brandon Casey
Nicolas Pitre
Jeff King
Brandon Casey
Martin Koegler
Alexandre Julliard
Clemens Buchacher
Samuel Tardieu
Alex Riesen
Charles Bailey