| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* mm/mediawiki-dumb-push-fix:
git-remote-mediawiki: no need to update private ref in non-dumb push
git-remote-mediawiki: use no-private-update capability on dumb push
transport-helper: add no-private-update capability
git-remote-mediawiki: add test and check Makefile targets
|
|
* jc/commit-is-spelled-with-two-ems:
typofix: cherry is spelled with two ars
typofix: commit is spelled with two ems
|
|
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
|
|
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
|
|
The commit object names in the insn sheet that was prepared at the
beginning of "rebase -i" session can become ambiguous as the
rebasing progresses and the repository gains more commits. Make
sure the internal record is kept with full 40-hex object names.
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
|
|
"git rebase -p" internally used the merge machinery, but when
rebasing, there should not be a need for merge summary.
* rt/rebase-p-no-merge-summary:
rebase --preserve-merges: ignore "merge.log" config
|
|
"git pull --rebase" always flattened the history; pull.rebase can
now be set to "preserve" to invoke "rebase --preserve-merges".
* sh/pull-rebase-preserve:
pull: allow pull to preserve merges when rebasing
|
|
"git push --no-thin" was a no-op by mistake.
* nd/push-no-thin:
push: respect --no-thin
|
|
* jk/mailmap-incomplete-line:
mailmap: handle mailmap blobs without trailing newlines
|
|
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
|
|
The auto-tag-following code in "git fetch" tries to reuse the same
transport twice when the serving end does not cooperate and does
not give tags that point to commits that are asked for as part of
the primary transfer. Unfortunately, Git-aware transport helper
interface is not designed to be used more than once, hence this
does not work over smart-http transfer.
* jc/transport-do-not-use-connect-twice-in-fetch:
builtin/fetch.c: Fix a sparse warning
fetch: work around "transport-take-over" hack
fetch: refactor code that fetches leftover tags
fetch: refactor code that prepares a transport
fetch: rename file-scope global "transport" to "gtransport"
t5802: add test for connect helper
|
|
Allow section.<urlpattern>.var configuration variables to be
treated as a "virtual" section.var given a URL, and use the
mechanism to enhance http.* configuration variables.
This is a reroll of Kyle J. McKay's work.
* jc/url-match:
builtin/config.c: compilation fix
config: "git config --get-urlmatch" parses section.<url>.key
builtin/config: refactor collect_config()
config: parse http.<url>.<variable> using urlmatch
config: add generic callback wrapper to parse section.<url>.key
config: add helper to normalize and match URLs
http.c: fix parsing of http.sslCertPasswordProtected variable
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
Teaches "git blame" to take more than one -L ranges.
* es/blame-L-twice:
line-range: reject -L line numbers less than 1
t8001/t8002: blame: add tests of -L line numbers less than 1
line-range: teach -L^:RE to search from start of file
line-range: teach -L:RE to search from end of previous -L range
line-range: teach -L^/RE/ to search from start of file
line-range-format.txt: document -L/RE/ relative search
log: teach -L/RE/ to search from end of previous -L range
blame: teach -L/RE/ to search from end of previous -L range
line-range: teach -L/RE/ to search relative to anchor point
blame: document multiple -L support
t8001/t8002: blame: add tests of multiple -L options
blame: accept multiple -L ranges
blame: inline one-line function into its lone caller
range-set: publish API for re-use by git-blame -L
line-range-format.txt: clarify -L:regex usage form
git-log.txt: place each -L option variation on its own line
|
|
Output from "git log --full-diff -- <pathspec>" looked strange,
because comparison was done with the previous ancestor that touched
the specified <pathspec>, causing the patches for paths outside the
pathspec to show more than the single commit has changed.
Tweak "git reflog -p" for the same reason using the same mechanism.
* tr/log-full-diff-keep-true-parents:
log: use true parents for diff when walking reflogs
log: use true parents for diff even when rewriting
|
|
Rework the reverted change to `cat-file --batch-check`.
* jk/cat-file-batch-optim:
cat-file: only split on whitespace when %(rest) is used
|
|
More fixes to the code to parse the "-L" option in "log" and "blame".
* es/blame-L-more:
blame: reject empty ranges -L,+0 and -L,-0
t8001/t8002: blame: demonstrate acceptance of bogus -L,+0 and -L,-0
blame: reject empty ranges -LX,+0 and -LX,-0
t8001/t8002: blame: demonstrate acceptance of bogus -LX,+0 and -LX,-0
log: fix -L bounds checking bug
t4211: retire soon-to-be unimplementable tests
t4211: log: demonstrate -L bounds checking bug
blame: fix -L bounds checking bug
t8001/t8002: blame: add empty file & partial-line tests
t8001/t8002: blame: demonstrate -L bounds checking bug
t8001/t8002: blame: decompose overly-large test
|
|
* db/http-savecookies:
t5551: Remove header from curl cookie file
http: add http.savecookies option to write out HTTP cookies
|
|
Allow a safer "rewind of the remote tip" push than blind "--force",
by requiring that the overwritten remote ref to be unchanged since
the new history to replace it was prepared.
The machinery is more or less ready. The "--force" option is again
the big red button to override any safety, thanks to J6t's sanity
(the original round allowed --lockref to defeat --force).
The logic to choose the default implemented here is fragile
(e.g. "git fetch" after seeing a failure will update the
remote-tracking branch and will make the next "push" pass,
defeating the safety pretty easily). It is suitable only for the
simplest workflows, and it may hurt users more than it helps them.
* jc/push-cas:
push: teach --force-with-lease to smart-http transport
send-pack: fix parsing of --force-with-lease option
t5540/5541: smart-http does not support "--force-with-lease"
t5533: test "push --force-with-lease"
push --force-with-lease: tie it all together
push --force-with-lease: implement logic to populate old_sha1_expect[]
remote.c: add command line option parser for "--force-with-lease"
builtin/push.c: use OPT_BOOL, not OPT_BOOLEAN
cache.h: move remote/connect API out of it
|
|
Allow fetch.prune and remote.*.prune configuration variables to be set,
and "git fetch" to behave as if "--prune" is given.
"git fetch" that honors remote.*.prune is fine, but I wonder if we
should somehow make "git push" aware of it as well. Perhaps
remote.*.prune should not be just a boolean, but a 4-way "none",
"push", "fetch", "both"?
* ms/fetch-prune-configuration:
fetch: make --prune configurable
|
|
When you run "git config --int", the maximum size of integer
you get depends on how git was compiled, and what it
considers to be an "int".
This is almost useful, because your scripts calling "git
config" will behave similarly to git internally. But relying
on this is dubious; you have to actually know how git treats
each value internally (e.g., int versus unsigned long),
which is not documented and is subject to change. And even
if you know it is "unsigned long", we do not have a
git-config option to match that behavior.
Furthermore, you may simply be asking git to store a value
on your behalf (e.g., configuration for a hook). In that
case, the relevant range check has nothing at all to do with
git, but rather with whatever scripting tools you are using
(and git has no way of knowing what the appropriate range is
there).
Not only is the range check useless, but it is actively
harmful, as there is no way at all for scripts to look
at config variables with large values. For instance, one
cannot reliably get the value of pack.packSizeLimit via
git-config. On an LP64 system, git happily uses a 64-bit
"unsigned long" internally to represent the value, but the
script cannot read any value over 2G.
Ideally, the "--int" option would simply represent an
arbitrarily large integer. For practical purposes, however,
a 64-bit integer is large enough, and is much easier to
implement (and if somebody overflows it, we will still
notice the problem, and not simply return garbage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we try to parse an integer config argument and get a
number outside of the representable range, we die with the
cryptic message: "bad config value for '%s'".
We can improve two things:
1. Show the value that produced the error (e.g., bad
config value '3g' for 'foo.bar').
2. Mention the reason the value was rejected (e.g.,
"invalid unit" versus "out of range").
A few tests need to be updated with the new output, but that
should not be representative of real-world breakage, as
scripts should not be depending on the exact text of our
stderr output, which is subject to i18n anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do not say chery; it is spelled cherry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a handful of instances where we say commmit when we mean
commit. Fix them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user is working on master, and has merged in their feature branch, but now
has to "git pull" because master moved, with pull.rebase their feature branch
will be flattened into master.
This is because "git pull" currently does not know about rebase's preserve
merges flag, which would avoid this behavior, as it would instead replay just
the merge commit of the feature branch onto the new master, and not replay each
individual commit in the feature branch.
Add a --rebase=preserve option, which will pass along --preserve-merges to
rebase.
Also add 'preserve' to the allowed values for the pull.rebase config setting.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/some-submodule-config-are-not-boolean:
avoid segfault on submodule.*.path set to an empty "true"
|
|
* sg/bash-prompt-lf-in-cwd-test:
bash prompt: test the prompt with newline in repository path
|
|
Fixes a minor bug in "git rebase -i" (there could be others, as the
root cause is pretty generic) where the code feeds a random, data
dependeant string to 'echo' and expects it to come out literally.
* mm/no-shell-escape-in-die-message:
die_with_status: use "printf '%s\n'", not "echo"
|
|
Finishing touches to an earlier fix already in 'master'.
* tr/fd-gotcha-fixes:
t0070: test that git_mkstemps correctly checks return value of open()
|
|
* jk/fast-import-empty-ls:
fast-import: allow moving the root tree
fast-import: allow ls or filecopy of the root tree
fast-import: set valid mode on root tree in "ls"
t9300: document fast-import empty path issues
|
|
Since 664059fb (transport-helper: update remote helper namespace,
2013-04-17), a 'push' operation on a remote helper updates the
private ref by default. This is often a good thing, but it can also
be desirable to disable this update to force the next 'pull' to
re-import the pushed revisions.
Allow remote-helpers to disable the automatic update by introducing a new
capability.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some people still use rather old versions of bash, which cannot
grok some constructs like 'printf -v varname' the prompt and
completion code started to use recently.
* bc/completion-for-bash-3.0:
contrib/git-prompt.sh: handle missing 'printf -v' more gracefully
t9902-completion.sh: old Bash still does not support array+=('') notation
git-completion.bash: use correct Bash/Zsh array length syntax
|
|
The recent "short-cut clone connectivity check" topic broke a
shallow repository when a fetch operation tries to auto-follow tags.
* nd/fetch-pack-shallow-fix:
fetch-pack: do not remove .git/shallow file when --depth is not specified
|
|
The read_mailmap_buf function reads each line of the mailmap
using strchrnul, like:
const char *end = strchrnul(buf, '\n');
unsigned long linelen = end - buf + 1;
But that's off-by-one when we actually hit the NUL byte; our
line does not have a terminator, and so is only "end - buf"
bytes long. As a result, when we subtract the linelen from
the total len, we end up with (unsigned long)-1 bytes left
in the buffer, and we start reading random junk from memory.
We could fix it with:
unsigned long linelen = end - buf + !!*end;
but let's take a step back for a moment. It's questionable
in the first place for a function that takes a buffer and
length to be using strchrnul. But it works because we only
have one caller (and are only likely to ever have this one),
which is handing us data from read_sha1_file. Which means
that it's always NUL-terminated.
Instead of tightening the assumptions to make the
buffer/length pair work for a caller that doesn't actually
exist, let's let loosen the assumptions to what the real
caller has: a modifiable, NUL-terminated string.
This makes the code simpler and shorter (because we don't
have to correlate strchrnul with the length calculation),
correct (because the code with the off-by-one just goes
away), and more efficient (we can drop the extra allocation
we needed to create NUL-terminated strings for each line,
and just terminate in place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and
then performs its operations upon those shortened values. This can lead
to an abort if the SHA-1 of a reworded or edited commit is no longer
unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the
todo list has the same abbreviated value.
For example:
edit f00dfad first
pick badbeef second
If, after editing, the new SHA-1 of "first" also has prefix badbeef,
then the subsequent 'pick badbeef second' will fail since badbeef is no
longer a unique SHA-1 abbreviation:
error: short SHA1 badbeef is ambiguous.
fatal: Needed a single revision
Invalid commit name: badbeef
Fix this problem by expanding the SHA-1's in the todo list before
performing the operations.
[es: also collapse & expand SHA-1's for --edit-todo; respect
core.commentchar in transform_todo_ids(); compose commit message]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and
then performs its operations upon those shortened values. This can lead
to an abort if the SHA-1 of a reworded or edited commit is no longer
unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the
todo list has the same abbreviated value.
For example:
edit f00dfad first
pick badbeef second
If, after editing, the new SHA-1 of "first" also has prefix badbeef,
then the subsequent 'pick badbeef second' will fail since badbeef is no
longer a unique SHA-1 abbreviation:
error: short SHA1 badbeef is ambiguous.
fatal: Needed a single revision
Invalid commit name: badbeef
Demonstrate this problem with a couple of specially crafted commits
which initially have distinct abbreviated SHA-1's, but for which the
abbreviated SHA-1's collide after a simple rewording of the first
commit's message.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As its very first action, t3404 installs (via set_fake_editor) a
specialized $EDITOR which simplifies automated 'rebase -i' testing. Many
tests rely upon this setting, thus tests which need a different editor
must take extra care upon completion to restore $EDITOR in order to
avoid breaking following tests. This places extra burden upon such tests
and requires that they undesirably have extra knowledge about
surrounding tests. Ease this burden by having each test install the
$EDITOR it requires, rather than relying upon a global setting.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fetch_pack() can remove .git/shallow file when a shallow repository
becomes a full one again. This behavior is triggered incorrectly when
tags are also fetched because fetch_pack() will be called twice. At
the first fetch_pack() call:
- shallow_lock is set up
- alternate_shallow_file points to shallow_lock.filename, which is
"shallow.lock"
- commit_lock_file is called, which sets shallow_lock.filename to "".
alternate_shallow_file also becomes "" because it points to the
same memory.
At the second call, setup_alternate_shallow() is not called and
alternate_shallow_file remains "". It's mistaken as unshallow case and
.git/shallow is removed. The end result is a broken repository.
Fix this by always initializing alternate_shallow_file when
fetch_pack() is called. As an extra measure, check if args->depth > 0
before commit/rollback shallow file.
Reported-by: Kacper Kornet <kornet@camk.edu.pl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
directory_exists_in_index() takes pathname and its length, but its
helper function directory_exists_in_index_icase() reads one byte
beyond the end of the pathname and expects there to be a '/'.
This needs to be fixed, as that one-byte-beyond-the-end location may
not even be readable, possibly by not registering directories to
name hashes with trailing slashes. In the meantime, update the new
caller added recently to treat_one_path() to make sure that the path
buffer it gives the function is one byte longer than the path it is
asking the function about by appending a slash to it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Old Bash (3.0) which is distributed with RHEL 4.X and other ancient
platforms that are still in wide use, does not understand the
array+=() notation. Let's use an explicit assignment to the new array
element which works everywhere, like:
array[${#array[@]}+1]=''
The right-hand side '' is not strictly necessary, but in this case
I think it is more clear.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "merge.log" config is set, "rebase --preserve-merges" will add
the log lines to the message of the rebased merge commit. A rebase
should not modify a commit message automatically.
Teach "git-rebase" to ignore that configuration by passing
"--no-log" to the git-merge call.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a878688adf46b226903858b53e2d31ac5c3
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git fails due to a segmentation fault if a submodule path is empty.
Here is an example .gitmodules that will cause a segmentation fault:
[submodule "foo-module"]
path
url = http://host/repo.git
$ git status
Segmentation fault (core dumped)
This is because the parsing of "submodule.*.path" is not prepared to
see a value-less "true" and assumes that the value is always
non-NULL (parsing of "ignore" has the same problem).
Fix it by checking the NULL-ness of value and complain with
config_error_nonbool().
Signed-off-by: Jharrod LaFon <jlafon@eyesopen.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Newlines in the path to a git repository were not an issue for the
git-specific bash prompt before commit efaa0c1532 (bash prompt:
combine 'git rev-parse' executions in the main code path, 2013-06-17),
because the path returned by 'git rev-parse --git-dir' was directly
stored in a variable, and this variable was later always accessed
inside double quotes.
Newlines are not an issue after commit efaa0c1532 either, but it's
more subtle. Since efaa0c1532 we use the following single 'git
rev-parse' execution to query various info about the repository:
git rev-parse --git-dir --is-inside-git-dir \
--is-bare-repository --is-inside-work-tree
The results to these queries are separated by a newline character in
the output, e.g.:
/home/szeder/src/git/.git
false
false
true
A newline in the path to the git repository could potentially break
the parsing of these results and ultimately the bash prompt, unless
the parsing is done right. Commit efaa0c1532 got it right, as I
consciously started parsing 'git rev-parse's output from the end,
where each record is a single line containing either 'true' or 'false'
or, after e3e0b9378b (bash prompt: combine 'git rev-parse' for
detached head, 2013-06-24), the abbreviated commit object name, and
all what remains at the beginning is the path to the git repository,
no matter how many lines it is.
This subtlety really warrants its own test, especially since I didn't
explain it in the log message or in an in-code comment back then, so
add a test to excercise the prompt with newline characters in the path
to the repository. Guard this test with the FUNNYNAMES prerequisite,
because not all filesystems support newlines in filenames. Note that
'git rev-parse --git-dir' prints '.git' or '.' when at the top of the
worktree or the repository, respectively, and only prints the full
path to the repository when in a subdirectory, hence the need for
changing into a subdir in the test.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier draft of the previous step used cache_name_exists() to
check the directory we were looking at, which missed the second case
described in its log message. Demonstrate why it is not sufficient.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit cdfd94837b27c220f70f032b596ea993d195488f, as it
does not just apply to "@" (and forms with modifiers like @{u}
applied to it), but also affects e.g. "refs/heads/@/foo", which it
shouldn't.
The basic idea of giving a short-hand might be good, and the topic
can be retried later, but let's revert to avoid affecting existing
use cases for now for the upcoming release.
|
|
This reverts commit a73653130edd6a8977106d45a8092c09040f9132, as it
has been reported that "ls-files --killed" is too time-consuming in
a deep directory with too many untracked crufts (e.g. $HOME/.git
tracking only a few files).
We'd need to revisit it later but "ls-files --killed" needs to be
optimized before it happens.
|
|
- From the beginning of push.c in 755225d, 2006-04-29, "thin" option
was enabled by default but could be turned off with --no-thin.
- Then Shawn changed the default to 0 in favor of saving server
resources in a4503a1, 2007-09-09. --no-thin worked great.
- One day later, in 9b28851 Daniel extracted some code from push.c to
create transport.c. He (probably accidentally) flipped the default
value from 0 to 1 in transport_get().
From then on --no-thin is effectively no-op because git-push still
expects the default value to be false and only calls
transport_set_option() when "thin" variable in push.c is true (which
is unnecessary). Correct the code to respect --no-thin by calling
transport_set_option() in both cases.
receive-pack learns about --reject-thin-pack-for-testing option,
which only is for testing purposes, hence no document update.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/submodule-subdirectory-ok:
t/t7407: fix two typos in submodule tests
|
|
In t/t7407-submodule-foreach.sh there is a typo in one of the
path names given for a test step. The correct path is
nested1/nested2/.git, but nested1/nested1/nested2/.git is
given instead. The typo is hidden because this line also
accidentally omits the && chain operator. The omitted chain
also means the return values of all the previous commands in
this test are also being ignored.
Fix the path and add the chain operator so the entire test
sequence can be properly validated.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Stephen Haberman
Matthieu Moy
Eric Sunshine
Nguyễn Thái Ngọc Duy
Brandon Casey
Ralf Thielow
Steffen Prohaska
Jharrod LaFon
SZEDER Gábor
Phil Hord